ConST 181/182
Contents
1. 4 Filler entrance 5 Vent valve air 6 Release liquid cup 7 Pressure adjustable vernier control clockwise to increase pressure 8 Spill valve liquid 9 Release valve liquid 10 Window 11 Fluid reservoir 12 Coarse adjustment handles clockwise to increase pressure Solutions A Isolating valve is not closed Close the isolating valve B The O ring is broken or loosen Replace sealing ring PR ZL200620119357 2 C The media is not enough Fill adequate media in reservoir D more air in the system Release the air out from system by using coarse adjustment handles A The isolating valve is not closed Close the isolating valve B The gauges are not connected tightly Turn the gauges tightly C The O ring is aged or frayed Replace O ring D The thread surface is not smooth Put in a Teflon seals and turn it tightly E The connector type is unmatched Use the right and suitable adapter A Too tightly turned last time Do not over tighten the valves Problems Hard to coarsely adjust Hard to fine adjust B The pressure maybe not adjustable by coarse adjustment handle under high pressure Adjust pressure using fine adjust handles Hard to rotate the screws C The new pump maybe not smooth The new pump needs time to abrade Lubricate the thread D The threads have no lubrication2. Operate the pump in the rated pressure range do not over the safety pressure 105MPa Close the valves and tighten the plugs in transportation or hand carrying Always open the release valve during operation Do not over tighten the connectors or handles to avoid any damage Change the contaminated media immediately Do not let the media level below to the mid line of reservoir Keep the outer threads clean Should collect the liquid by using a cup or other vessels when the spill valve and release valve is opened Any security problems or damages caused by incorrect operations is beyond ConST group s responsibility Pressure range 0 09 to 0 to 70 MPa Temperature 0 50 C Humidity lt 95 RH Adjusting fineness 0 0001MPa Safety pressure lt 105MPa Pressure media Oil or deionized water which is compatible with copper 304 Stainless Steel TYZOR BTP and Buna N Size ConST181 182 475 340 260mm 4 E aw 885 340 260mm for ConST 185 as Kk P KB ta Weight ConST181 182 16Kg 22Kg for ConST185 Calibration cau be easg Remark If atmosphere pressure is 100KPa the vacuum can reach to 0 09MPa If local atmosphere is P the vacuum can reach to 0 09P 181 182 Hydraulic Pressure Pump User s Manual l l O ring plug funnel This manual is suitable for 185 too ZL200620119357 2 M20x1 5 ConST181 182 X 3 ConST185 X 5 1 M20 1 5 quick connector 2 Shut off valve for quick connector 3 Shut off valve for fluid reservoir
Download Pdf Manuals
Related Search