Digital Terrestrial HD Receiver SRT 8525
Contents
1. The information banner is automatically removed from the screen after a certain time specified by the setting for Banner timeout within the Time Setting menu For details refer to chapter 6 3 3 NOTE Event information will be displayed when available Availability depends on the broadcast 5 3 2 Extended information banner To display extended information press once again or twice from viewing mode The following information will be provided m On top of the frame you will see the name of the channel m Below you will find the frequency bandwidth and signal indicators of the channel a In the 2nd half of the screen you will find the event description Use lt P to switch between the current Now and Next event If the complete information exceeds the displayed area use Y in order to read further To remove the info banner press or EXIT NOTE Event information will be displayed when available Availability depends on the broadcast 5 4 Electronic TV Programme Guide EPG This function gives you the opportunity to view programme schedules of digital terrestrial channels for up to 7 days To open the EPG press EPG in viewing mode Use AY to select a channel and lt gt to select an event Press j to display detailed information of the selected event You can use A Y to scroll the text and EXIT to close this information For fast navigating press BLUE to show events taking place the next day at the same time From this moment on yo2. MPEG TS VOB MP4 AVI MKV Supported formats MP3 WMA Supported formats JPG PNG BMP STRONG can t guarantee the playback of all files in the mentioned formats The possibility to playback depends on the used codecs data rates and resolution For a detailed list of supported codecs please refer to the Appendix Connectors Antenna Input Antenna output TV SCART 3 RCA Composite Video Audio Left and Right S PDIF coaxial USB 2 0 Type A connector HDMI Type A version 1 3 with HDCP General data Input power Power consumption Power consumption in standby Operating temperature range Storage temperature Operating humidity range Dimensions W x D x H in mm Weight AC 100 240 V 50 60 Hz 10 W max with USB device connected 0 70 W without USB device connected 0 40 C 10 50 C 10 85 RH non condensing 210x 145 x 49 0 59 kg 22 www strong tv PART 2 English STRONG DIGITAL TV 9 0 APPENDIX Video specifications File Container Video Codec Audio SPEC Bit Profile Comment Extension Codec Rate mpg MP2 MP4 GMC mpeg MPG MPEG MPEG 1 2 MP3 ko E Main Profile is not dat LPCM R supported ts tr Me BaN h te mots MPEG 2TS MPEG 2 H 264 MP3 1920x1080 20 profile REZ S je PUS H26418 AVS AAC 30p Mbit s K m2t1 MPEG 2 Main HEAAC Profile MP2 vob MPEG 2 PS MPEG 1 2 MP3 1920x1080 S Main Pr
3. use the A Y buttons To start playback of a movie press OK to watch it in full screen mode press K During playback it is possible to perform the following actions UH To pause playback b gt lt q For fast forward or fast rewind during playback A To jump to playback of the previous or next file R To stop playback GREEN To change the repetition mode between 7 Once the selected file will be repeated randomly Folder the files contained in this folder will be repeated once and Folder Random the files contained in this folder will be repeated randomly With another press on the button you will return to standard mode no repetition 18 www strong tv PART 2 English STRONG DIGITAL TV AUDIO Allows you to switch between the supported audio languages If a file contains more than one audio track then each press of this button will switch to the next audio track SUB Displays a list of subtitles if available in the same folder for this movie i Displays technical details of the currently played file YELLOW Allows you to play a separate segment of the movie Press this button once at the time to start the repeat of a segment the screen will replay A press the button a second time at the end of the segment you will see Repeat AB and the receiver will play this sequence in a loop To stop the loop playback press the button again BLUE Opens the GOTO function where you can enter a time at which you
4. In menu channel list to scroll page up down In viewing mode to switch the resolution between 576i 576p 720p 10801 and 1080p 50 Hz In menu and Teletext mode depends on the menu context In viewing mode to open Teletext if broadcasted In menu and Teletext mode depends on the menu context In viewing mode to select a subtitle language if subtitles are broadcasted In menu and Teletext mode depends on the menu context In viewing mode to toggle between the two last watched channels In menu and Teletext mode depends on the menu context In viewing mode to pause TV picture In multimedia mode to pause playback of a file www strong tv PART 2 English STRONG DIGITAL TV 23 U For multimedia playback to start playback of the previous file 24 Db For multimedia playback to start playback of the next file 25 No function 26 gt For multimedia playback to start playback 27 For multimedia playback starts fast rewind supported modes are 2x 4x 8x 16x and 32x 28 gt gt For multimedia playback starts fast forward supported modes are 2x 4x 8x 16x and 32x 29 E For multimedia playback to stop playback of a file 2 4 Installing the batteries Fig 4 Open the cover on the remote control and insert 2x AAA batteries into the compartment Correct position of the polar diagram shows the batteries inside the compartment 1 Open the cover 2 Insertthe batteries 3 Close the lid WARNING The batteries should not be rechar
5. Input connector Input frequency range Input signal level Antenna power Demodulation DVB T T2 Demodulation Demodulation modes Bandwidth FFT mode Guard interval Forward Error Corrections Video decoder Profile Input bit rate Aspect ratio Frame rate Video resolution IEC60169 2 female 75 Ohm nominal VHF 177 5 226 5 MHz UHF 474 858 MHz 82 25 dBm 5 V DC 0 5 V max 60 mA short cut protected Compliant to DVB T EN 300 744 DVB T2 EN 302 755 QPSK 16 64 256 QAM 7 or 8 MHz 1K 2K 4K 8K 16K 32K and extended normal DVB T 1 32 1 16 1 8 1 4 DVB T2 1 128 1 32 1 16 19 256 1 8 19 128 1 4 DVB T 1 2 2 3 3 4 5 6 7 8 DVB T2 1 2 3 5 2 3 3 4 4 5 5 6 MPEG 2 MP ML MP HL MPEG 4 H 264 AVC Up to 30 Mbit s 4 3 and 16 9 Letterbox Pan amp Scan Auto 25 Hz for PAL 576p 720p 1080i 1080p www strong tv 21 STRONG PART 2 English DIGITAL TV Audio decoder Audio support Audio mode Freguency response Sampling rate Conditional Access System System Card reader System and memory Processor Flash memory System memory Multimedia Video playback Audio playback Picture view MPEG 1 Layer 1 amp 2 AAC Mono L R Stereo 20 Hz 20 kHz unevenness in the frequency range 60 Hz 18 kHz 0 5 dB 32 44 1 48 kHz Irdeto CCA 1 slot conforming to ISO 7816 MSD5043 8 MByte 128 MByte Supports various formats MPG
6. for installing and using this receiver The following symbols will serve as follow WARNING Indicates warning information NOTE Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold Characters Move to Represents a menu item within a window Italic Characters 1 4 Accessories m Receiver 1 pc m User Manual 1 pc m Remote control 1 pc m Batteries AAA 2 pcs WARNING The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices m Itis recommended to use USB 2 0 storage devices If your device is not compatible to USB 2 0 specifications the multimedia and video playback with your receiver would not work properly m If you are going to use external USB HDD Hard Disk Drive please consider that it might be the case that the power specifications exceed the supported output of your receiver 5 V 500 mA If so please connect your USB HDD to a corresponding external power adapter m STRONG cannot guarantee compatibility to all types of USB storage devices m It is advised not to store important information on USB storage devices used with the receiver Always ma
7. menu 6 1 Programme Organizer Press MENU and use lt gt to select the Program Organizer and press OK Following submenus are displayed Channel Manager Channel Sort and Delete all Use AY to select a submenu and press OK or B to access 6 1 1 Channel Manager The channel manager allows you to move skip lock delete and add channels to the favourite list To access this menu you will need to enter your PIN code DEFAULT PIN 0000 10 www strong tv PART 2 English STRONG DIGITAL TV Now your TV channel list will be shown To switch between the TV and radio list use lt P To navigate within the list use the A W buttons Move Skip Lock Delete Add channels to favourite lists 6 1 2 Channel Sort To move a channel to a new position use the A Y buttons to select the channel then press the RED button Now next to the channel s name the symbol 4 is shown This indicates that this channel can be moved to another position To do so use the AW buttons to move it and press OK to confirm Proceed as described for any other channels you wish to move You can also correct the channel selection for moving by pressing the RED button again To skip a channel during switching through the channel list use the AY buttons to select the channel then press the GREEN button Now next to the channel s name the symbol PF is shown After that channels marked with P willbe ignored when switching through the channels in viewi
8. receiver 6 7 3 Product Status The Product Status shows the current subscription status information of the product s you have subscribed to by your operator You will see the activation date and duration of the subscribed product s 6 7 4 Client Status This menu displays all details of the built in conditional access system and its capabilities 6 7 5 Mail Box In this menu you can read mails sent by the operator 19 www strong tv STRONG PART 2 English DIGITAL TV 6 7 6 Announcement Box In this menu you can read announcements sent by the operator 6 7 7 Region Status This menu displays the specific regional data according to the country this product is developed for 7 0 TROUBLESHOOTING There may be many reasons that affect the correct operation of your receiver If the receiver does not work as you expect please follow the steps outlined below If after performing these operations the receiver does not work well contact your dealer or service centre in your area Do not open the receiver cover This action will damage the warranty seals and warranty repairs will be denied Problem Possible reason Remedy The mode The power plug is not connected Check the connection of the receiver to the indicator does main power notlightup The receiver is connected to the Turn the power extender ON main power through an extender and the power is OFF No signal The antenna is disconnected Connect th
9. the recording info press j To stop the recording press STOP Please connect a USB storage device formatted in FAT32 with sufficient free space before you start a recording For recording HD broadcast we strongly recommend to use a high speed device WARNING Within Irdeto encrypted services some events may be protected or limited and following to that recording might not be possible This might also be the case for recording through the analogue output on Scart to a VCR or DVD recorder If maturity rating is activated for a specific recording you will have to enter the appropriate PINCode MATURITY RATING PIN 0000 to record this event 5 9 Playback of recording If recordings were already made you have the possibility to access the HDD Manager directly from viewing mode by pressing the button With A Y select the record of your choice and with OK start the playback in preview mode To watch a record in full screen mode press OK again Alternatively you can press K to start playback in preview mode Further options are displayed in the Records menu For a detailed description of the menu please refer to chapter 6 5 Records 6 0 MAIN MENU The main menu gives you access to specific settings and multimedia functions To access the main menu press MENU in viewing mode The main menu consists of the following sub menus Program Organizer Channel Search System Setup Tools and Multimedia Press EXIT in the main menu to get back to the previous
10. to the list of files press EXIT If you currently are in a subfolder use the RED button to access the parent folder The receiver shows the selected files on the right side next to the list When you press the GREEN button the receiver will show the files in a small preview If you want to start the slide show press gt and if you want to quit it again press W Settings for the slide show can be made in the menu Photo config see chapter 6 5 4 6 6 2 Music Your receiver supports playback of music files in the following formats MP3 and WMA To navigate in the list of files and folders use the A Y buttons To start playback of a music file press OK During playback it is possible to perform following actions UH To pause playback KK lt q For fast forward or fast rewind during playback A To jump to playback of the previous or next file R To stop playback Additionally you can use lt P and to adjust the volume With the GREEN button you can change the repetition mode between 7 Once the selected file will be repeated randomly Folder the files contained in this folder will be repeated once and Folder Random the files contained in this folder will be repeated randomly With another press on the button you will return to standard mode no repetition 6 6 3 Movie Your receiver supports playback of movie files in the following formats MPG MPEG TS VOB MP4 AVI MKV To navigate in the list of files and folders
11. want to start playback Additionally you can use 4 gt and to adjust the volume 6 6 4 Photo Config This menu allows you to customise the settings for the slide show Use lt P to change the Slide time You can change the Slide mode as well it will change the effect between slides 6 6 5 Movie Config This menu allows you to customise the settings for the subtitle display Use lt P to change and AV to select the preferred colour background and font colour 6 6 6 Remove USB device This menu item only appears when a USB device is connected Select the menu item and press OK to remove the USB device from your receiver safely Now you can disconnect the USB device after the message USB device is removed disappears 6 7 Irdeto CA Status The menu rdeto CA Status allows you to access information about the embedded CA system Primarily it is intended for professionals and includes terms and abbreviations mostly in English Under some circumstances you may need to access information from this menu in order to provide it to your service provider support This will only be necessary if you are facing problems while watching scrambled channels of your basic or additional subscription 6 7 1 Service Status In this menu you can find information about the service descrambling status 6 7 2 Loader Status In this menu you can find information about the used software version Irdeto loader the CSSN chipset serial number and serial number of your
12. you want to switch Channel Name Shows the name of the chosen channel Start Date Use 0 9 to enter the date on which the timer should switch the receiver on Please consider the date format dd mm yyyy Start Time Use 0 9 to enter the start time End Time Use 0 9 to enter the end time Repeat Use lt P to select in which cycle the timer should be repeated Once the timer will switch ON once after this the timer will be removed from timer list Daily the timer will switch ON every day at the set time Weekly the timer will switch ON once a week at the set time In viewing mode the receiver will notify you 10 seconds before a timer starts You can confirm the timer by pressing OK or cancel with EXIT If there is no input given the timer will be executed After the timer event has been finished the receiver switches to the last watched channel If the receiver was in standby it automatically turns to standby again after the timer passed If you already have timers in the list you can use these functions as well Edit If you wish to change some settings for a present timer use AW to select the timer and press GREEN to open it Afterwards you can define the settings like described in above Delete For deleting a timer you don t need use the A Y buttons to select the timer and press BLUE to delete it A message will be 15 www strong tv STRONG PART 2 English DIGITAL TV shown where you can press OK to con
13. 5 3 Info Banner 5 4 Electronic TV Programme Guide EPG 5 5 Selecting subtitle language 5 6 Displaying Teletext STRONG DIGITAL TV WO 0 10 994 d Gh GG G O O LH Ln MH LH Ln E W WWW WW WM KM KM N 5 7 Using external USB storage devices 10 5 8 Instant Recording 10 5 9 Playback of recording 10 6 0 MAIN MENU 10 6 1 Programme Organizer 10 6 2 Channel search 12 6 3 System Setup 13 6 4 Tools 15 6 5 Records 16 6 6 Multimedia 18 6 7 Irdeto CA Status 19 7 0 TROUBLESHOOTING 20 8 0 TECHNICAL SPECIFICATION 21 9 0 APPENDIX 23 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004 108 EC and 73 23 EC RoHS 2002 95 EC Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change Irdeto is a registered trademark of Irdeto Access BV All other product names are trademarks or registered trademarks of their respective owners STRONG 2012 All rights reserved 1 www strong tv STRONG PART 2 English DIGITAL TV 1 0 INTRODUCTION 1 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER In a closed or poorly ventilated cabinet directly on top of or under any other equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or any other equipment that generates heat to rain or intense moisture to intense vib
14. A Pro WMA ASF nm KHz LPCM N A Bitrate 64 Kbps 1 5 Mbps work with video files only Sampling Rate 8 KHz 48 Khz IMA ADPCM MS ADPCM LBR N A work with video files only N A work with video files only Bitrate 384 Kbps Sampling Rate 8 KHz 48 Khz Bitrate 6 Kops 96K bps Sampling Rate 8 KHz 48 Khz Photo specifications Photo Codec File Extension Max Resolution Base line 15360x8640 ES SP FES IEE Progressive 1024x768 BMP BMP 9600x6400 PNG PNG 9600x6400 24 www strong tv
15. S TRONG Digital Terrestrial HD Receiver DIGITAL TV SRT 8525 STRONG evetv 8 DAIA If User Manual DYE 2 www strong tv Slika 1 Slika 2 evotv STRONG DZIA Slika 3 lt e e m HA S a Senna ul iS E S 5 aq 2 Ds ss al 24 3 19 9 Ge 25 NI L evotv Slika 4 Slika 5 STRONG evetv 2 DAIA 30 30 ee 56066689 s2 Slika 6 Antena Opcija L KST NOZ m paia emaljski HD prijemnik SRT 8525 Supplied by Ges amp Co Japan ae SCART Slika7 27 Nov 2012 1446 PART 2 English TABLE OF CONTENTS 1 0 INTRODUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 1 5 Usage of external USB devices 2 0 YOUR RECEIVER 2 1 Front panel 2 2 Rear panel 2 3 Remote control 2 4 Installing the batteries 2 5 Using the remote control 3 0 CONNECTIONS 3 1 Connecting to your aerial antenna 3 2 Connecting to TV with HDMI cable 3 3 Connecting to TV with SCART cable 3 4 Connecting to TV with cinch cable 3 5 Connecting to a digital audio amplifier 3 6 Connecting to a digital A V receiver and TV using HDMI 3 7 Connecting an external USB storage device 4 0 STARTING UP FOR THE FIRST TIME 4 1 Antenna Adjustment 5 0 QUICK GUIDE TO USING YOUR RECEIVER 5 1 Changing channels 5 2 Adjusting volume and audio
16. When the channel scan has been completed the receiver will tune on the first found TV channel NOTE If the receiver hasn t found any channels by the end of the channel scan it is possible that your antenna is not installed aligned correctly To ensure good results and the proper antenna configuration refer to qualified professionals 5 0 QUICK GUIDE TO USING YOUR RECEIVER We at STRONG understand that you can t wait to enjoy your new high definition digital terrestrial receiver The following quick guide will help you getting familiar with the basic operation of this device We do however advice you to read the full manual to get the best performance from your receiver To switch your receiver ON or in standby use the button on the remote control or on the front panel of your receiver If you will not use the receiver for a longer time unplug it from the mains by unplugging the power plug from the outlet NOTE 5 min after switching the receiver to standby it will enter the deep sleep mode Within this time the receiver is able to start up quickly Starting up from deep sleep takes approx 40 sec 5 1 Changing channels There are different ways to change channels a Via direct access using the 0 9 buttons Via the channel list through the OK button Via the A Y or P and P buttons 5 1 1 Direct access To access to a channel directly simply enter its number with the 0 9 buttons on the remote control Channel numbers can
17. Y to select language and confirm with OK The audio channel as stereo mono left and mono right can be selected with the lt P buttons 5 3 Info Banner Every time you switch to a channel the info banner will be displayed While watching TV you can press the z button to display it again to access information about the current channel and event Press L twice for detailed programme and technical information 5 3 1 Standard information banner The following information will be provided m Channel number and name Current date and time m Start and end time of the current event m Start and end time of the next event m Icons showing the presence of additional services provided and some properties of this channel The channel is broadcasted in standard definition resolution The channel is broadcasted in high definition resolution Green colour indicates the presence of Teletext Green colour indicates the presence of DVB subtitles Green colour indicates that this an encrypted channel 8 Green colour indicates that the channel is locked via channel lock Indicates that the current aspect ratio is broadcasted in 4 3 format Indicates that the current aspect ratio is broadcasted in 16 9 format Green colour indicates the presence of Dolby Digital audio stream Green colour indicates the presence of subtitles for the hearing impaired www strong tv PART 2 English STRONG DIGITAL TV
18. ally Loop out in stand by This allows to by pass the antenna signal to the ANT OUT connector where you may have an additional TV set receiver connected in order to receive analogue digital broadcasts there too Digital audio Use lt P to adjust this setting in accordance to the used audio equipment To loop the digital audio through HDMI or S PDIF to a connected amplifier home theatre or other equipment able to decode AAC and AC3 set RAW HDMI ON If neither your TV set nor any other connected audio equipment support decoding AAC and AC3 adjust RAW HDMI OFF 6 3 3 Time Setting This menu allows you to specify the method which the receiver will use to synchronise the date and time and you can set the duration for displaying the information banner Time Offset Use lt P to choose Auto to synchronise time and time zone automatically or Manual to specify the time zone manually Region Use lt P to choose your specific country Time Zone This setting is only available when the Time Offset is set to Manual You can use lt gt to adjust the time zone if the automatic settings in your region are not supported by the broadcast Summer Time Use lt P to select On or Off according to your local season Banner Time OUT Use lt P to choose between the available settings 35 45 55 65 75 8s 9s and 10s 6 3 4 Auto Standby Auto standby is a new feature that helps you reduce power consumption When Activation is set to On the receiv
19. applicable TV Mode Use lt P to select the mode Commonly the PAL standard is used but it might be that you need to use the setting NTSC We recommend referring to the user manual of your TV set to check the correct setting Video Output Use lt P to select between RGB and CVBS modes Screen Mode Use lt P to adjust this setting in accordance with the aspect ratio of your TV set 4 3 or 16 9 and the preferred conversion The options are Auto automatic detection of aspect ratio 4 3 Panscan displays 16 9 broadcasts full screen and cut upper and lower parts of 16 9 video on your 4 3 TV 4 3 letterbox displays 16 9 widescreen broadcasts with black bars on top and under the picture on a 4 3 TV For a modern 16 9 TV set following options can be set 16 9 Wide Screen 16 9 PillarBox 4 3 broadcasts will be shown with black vertical bars on the left and right side of the image and 16 9 Pan amp Scan We recommend trying these settings in order to find the option that suits you best Do not forget 13 www strong tv STRONG PART 2 English DIGITAL TV about the possibility to control the TV format via the menu of your TV set HDMI Output Allows you to change the resolution of the HDMI output If the connected TV does not support the set resolution you will see a black screen In this case wait for 10 15 seconds without pressing any buttons on the remote control of the receiver and the previous value will be recovered automatic
20. be up to four digits long Entering a number with less than four digits is possible Just wait a few seconds and your receiver will switch to the channel number or just press OK after inserting www strong tv STRONG PART 2 English DIGITAL TV 5 1 2 Channel list Press OK in viewing mode to display the channel list Use A Y in the list to highlight your channel of choice and press OK to switch to this channel To scroll to the next or previous 9 channels you can also use the P P buttons With the lt P buttons you can toggle between the TV and radio channel list To change directly from TV to radio mode press the TV R button By pressing the FAV button in viewing mode you can open the FAV group selection if a favourite list has been created If more than one FAV list have been created then you can use the lt P buttons to toggle between the different FAV groups Movies News Sports and Music 5 1 3 Using A Y or P P A switches to the next channel Y switches to the previous channel P switches to the next channel P switches to the previous channel 5 2 Adjusting volume and audio To adjust the volume you can use the V V or lt P buttons To mute the audio output press to enable the audio output again press again Some channels support a choice of different audio formats and or languages To select another audio language press AUDIO in viewing mode A list with available audio languages will be displayed Use A
21. creen or 16 9 PillarBox Displays 4 3 broadcast with back pillars at left and right sides on your 16 9 TV which you can use for 16 9 TV sets www strong tv PART 2 English STRONG DIGITAL TV Antenna Power Set to On if you use an active antenna When set to On 5 V will be present on the ANT IN connector of the receiver Select Offfor passive antennas or when connected to a house distribution system When all settings have been made move the highlight to Next and press OK to continue The receiver will now advance to the Antenna Adjustment screen 4 1 Antenna Adjustment In this menu you can adjust the antenna in order to ensure best signal guality Band Allows you to select the freguency range according to your local broadcast conditions The default adjusted UHF range is the mostly used one so we recommend not to change this setting If you know that the VHF range is used in your country you can select it with lt gt Freguency channel Select a channel freguency that broadcasts digital TV channels in the region where you live Now you can adjust your aerial antenna to a proper position in order to get the best signal guality and strength indication displayed Afterwards press Y to move the highlight to Search and press OK to start the channel scan process The receiver will start searching for channels Information about the scanned freguency found TV and radio channels and channel scan progress is displayed on screen
22. de This menu also contains information about disk format total space and free space 6 5 3 Format In this menu you can format your USB device Use the lt P buttons to select a partition Press OK to start the format process or use EXIT to cancel WARNING Format operation will delete all data from your USB device Please make sure to backup important data from your USB device before formatting it 17 www strong tv STRONG PART 2 English DIGITAL TV 6 5 4 Remove USB device This menu item only appears if a USB device is connected Select the menu item and press OK to safely remove theUSB device from your receiver Now you can disconnect the USB device after the message USB device is removed disappears 6 6 Multimedia Press MENU and use lt B gt to select Multimedia then press OK Following submenus will be displayed Picture Music Movie Photo Config and Movie Config Use AY to select a submenu and press OK or K to access Before you use the various multimedia functions of your receiver please ensure that your USB device is connected properly and that it is formatted in the required file system This will enable you to view pictures and play music and video files 6 6 1 Picture Your receiver supports photo files in the following formats JPEG BMP and PNG To navigate in the list of files and folders use the A Y buttons To open a folder press OK when a picture is selected it is shown in full screen mode To get back
23. e antenna cable found The antenna is damaged Check the antenna and its position misaligned The cable between the antenna Make sure that the cable is in good and the receiver is damaged condition Possible bad connections in the Check proper connections cable system Out of digital signal area Check with your dealer The active antenna requires Make sure to enable antenna power from turning the antenna power the receiver menu see chapter 6 2 1 or use external power ON an external power supply No picture or HDMI SCART AV is not selected on Switch to correct TV input soundonTV _ your TV or the amplifier or is set to a higher resolution than the TV Select lower resolution via receiver supports Switch on TV TV is not switched on Connections are not done properly Please ensure that the connections are done correctly and are fitting well to the Quality of connected cables connected input output Check that the insufficient quality of all cables is good Reconnect all cables between the receiver and TV set Video with Low signal level due to bad For good signal reception you may need to mosaic audio weather conditions realign replace antenna is noisy or A V The antenna is damaged or Check the antenna and cables disappears covered by ice winter time from time to Damaged cable from antenna to time receiver The indoor antenna has been Setup the antenna at a better position moved from a good po
24. ed in the same way to add other channels to favourite groups You can also remove a channel from a favourite group by pressing the FAV button again and selecting the group it is part of Then press OK to remove the symbol and the channel will be removed from this these favourite group s This menu allows you to sort the channels by following methods By LCN The channels will be sorted according to the LCN Logical Channel Numbering system which may be broadcasted in your area If the operator does not support LCN your channel numbers will start with channel number 800 otherwise the LCN channels will be sorted in regional order starting with 1 None LCN channels can be found again starting with number 800 Further www strong tv 11 STRONG PART 2 English DIGITAL TV the LCN method will allow you to save the strongest channels broadcasted in your area only By Service Name The channels will be sorted in alphabetical order By Freguency The channels will be sorted in ascending order of the freguency in which they are broadcasted By Operator The channels will be sorted by the operator ID 6 1 3 Delete All Use this menu carefully It will delete all of the stored channels and settings To execute this function it will be reguested to enter the PIN code DEFAULT PIN 0000 After you have performed this action you will be guided to the Installation Guide again WARNING The Delete all function will permanently de
25. er will switch to standby if it hasn t received any commands for three hours Set Auto Standby to Off to deactivate this function When the setting is On you can adjust the Duration Before Standby Available settings are 1 Hour 12 Hours with steps of one hour 6 3 5 Parental Control After selecting this menu item and pressing OK you will be asked to enter the PIN code DEFAULT PIN 0000 This menu allows you to use the EPG based parental rating system if supported by the local broadcast Age Use lt gt to change the settings Following rates are available OFF to disable the function 04 05 06 07 08 09 10 11 12 13 14 15 16 17 and 18 Whenever switching through channels which submit EPG based parental rate and the rate of the current broadcast is below the adjusted rate you will have to enter your PIN code Example Your youngest child is 7 years old and you have set a rate of 07 Now when you switch to a channel which is not foreseen for an age below 10 years you will have to enter the PIN code DEFAULT PIN 0000 6 3 6 Reset Factory Default This option allows you to reset the receiver to the factory settings which clears all stored channels and settings 14 www strong tv PART 2 English STRONG DIGITAL TV WARNING By resetting your receiver to the factory default all your settings and stored channels will be permanently deleted Please use this option with care After selecting this menu and press
26. firm deletion or EXIT if you wish to keep the timer After your settings have been made you can leave the menu with EXIT 6 4 2 Information In the Information menu you can get information about the hardware and software version installed in your receiver Furthermore you will find information about our website www strong tv Please open this menu when you call our hotline or contact the support The person who answers your call email might ask for the information given on this screen 6 4 3 Change Password In order to access certain functions of the receiver you need to enter a PIN code This is done to prevent changes of the receiver settings through persons who do not know the PIN code e g children To change the PIN code to a personal one it is reguired to enter your old current PIN DEFAULT PIN 0000 by using 0 9 to enter it and then to enter the new PIN code and confirm it again in below 6 4 4 Updating the software by USB This feature allows you to upgrade receiver software via the USB port If new software is available for your receiver it can be downloaded from our website www strong tv Place the software file unzipped into the root directory of your USB storage device HDD memory stick etc and insert this device into the USB port of the receiver Please consider that only USB devices formatted in FAT or FAT32 file system will be detected and can be used for the update process Now select Upgrade by USB via the A Y butt
27. ged disassembled electrically short circuited be mixed or used with other types of batteries If rechargeable accumulators will be used instead of batteries we recommend using e g NiMH types with low self discharge to ensure long time operation of the remote control 2 5 Using the remote control Fig 5 To use the remote control point it towards the front of your receiver The remote control supports a range of up to 7 meters distance to the receiver at an angle of up to approx 30 degrees NOTE Managing the receiver will be limited or not possible if there are obstacles between the remote control sensor at the front panel of the receiver and the remote control Direct sunlight or very bright light can reduce or disturb the reception of the remote control signals 3 0 CONNECTIONS WARNING Please make sure that connection devices are disconnected from their main power supplies before connecting these to the receiver 3 1 Connecting to your aerial antenna Fig 6 To receive digital broadcast signals your receiver has to be connected to a terrestrial indoor or outdoor antenna Use the antenna cable to connect the aerial with the ANT IN connector on the back of your receiver Please ensure that a properly shielded antenna cable and suitable connectors are used The TO TV connector allows you to loop the antenna signal to a second receiver or TV set 3 2 Connecting to TV with HDMI cable Fig 6 We recommend connecting your TV se
28. h and listen to programmes If your TV set already supports DD audio we recommend you to use the direct connection as described above in chapter 3 2 3 7 Connecting an external USB storage device Fig 6 NOTE For details to consider when using a USB storage device please refer to chapter 1 5 4 0 STARTING UP FOR THE FIRST TIME Ensure that your connections are setup properly In case of difficulties or questions please ask your local dealer or service for assistance It is recommended to follow the nstallation Guide step by step It will guide you through the basic installation and channel searching process It will enable you to enjoy digital HD broadcasts just within a few minutes Start by selecting your language using lt gt After selecting your language press W to move the highlight to Region Select your region with the lt P buttons Display Mode Use lt P to switch the HDMI resolution to your value of choice If your TV set doesn t support a specific resolution you will see black picture but to recover you can use lt P for switching to the next or previous resolution Aspect Mode Use this option to select the aspect ratio of your TV set and the preferred conversion method The options are Auto automatic detection of aspect ratio 4 3 Panscan Displays 16 9 broadcasts full screen and cut upper and lower parts of 16 9 video on your 4 3 TV 4 3 letterbox black bars on top and under the picture ona 4 3 TV and 16 9 Wide S
29. ing OK you will be asked to enter the PIN code DEFAULT PIN 0000 After having entered the PIN code you will be guided to the nstallation Guide again If necessary you can change the PIN code To change the PIN code please enter the Tools menu see chapter 6 4 3 of this manual 6 4 Tools Press MENU and use gt to select Tools then press OK Following submenus will be displayed Timers Information Change Password USB Upgrade OAD Upgrade and Remove USB device Use A Y to select a submenu and press OK or P to access 6 4 1 Timer The timer function allows you to turn the receiver on and off according to the defined settings Timers can be set from the EPG in the most convenient way but you can also set timers manually via this menu In the menu Schedule a summary of the configured timers will be displayed number channel name date start and end time repeat and timer status NOTE The list will be empty if there are no configured timers You can add change or delete a timer Add To add a timer press the RED button Use lt gt AV and 0 9 in the menu to configure the settings for the event After the settings have been made set the necessary parameters and press OK to apply the timer into the list Channel Type Use lt P to choose between TV and radio programmes the radio option is not available if there are no radio channels broadcasted in the channel list Channel No Use lt P to select the channel number to which
30. ke backups of data on your USB storage device before using it with this receiver STRONG will not take responsibility for any loss of information or circumstances caused by loss of information m Please ensure that the USB device is already formatted to FAT FAT32 or NTFS If it is not please format the USB device via your PC or notebook 2 0 YOUR RECEIVER 2 1 Front panel Fig 1 1 button Switches the receiver between standby off and operating mode 2 Stand by indicator Green light in operating mode and red light in standby mode 3 Infrared sensor Receives signals from the remote control 4 Slot for smart card The slot is behind the front flap and only intended for service use it won t be used during operation 2 2 Rear panel Fig 2 1 ANTIN To connect to your aerial using a standard antenna cable 2 ANT OUT To connect to your TV or additional receiver via a standard antenna cable www strong tv 3 STRONG PART 2 English DIGITAL TV AUDIO L R VIDEO S PDIF USB HDMI SCART Power cord 2 3 Remote control ou SS oy 11 12 13 14 15 16 20 21 22 AV TV R MENU EXIT AY lt gt OK EPG i V V FAV AUDIO ZOOM P P RED V F GREEN TEXT YELLOW SUB BLUE RCL To connect to your TV or VCR alternatively you can connect to an amplifier or HIFI system using an RCA cable To connect to your TV or VCR using an RCA cable To connect to a digita
31. l home theatre or audio amplifier with an audio cinch cable To connect your USB storage device stick HDD etc To connect to the HDMI input of your TV using a good quality HDMI cable To connect to your TV set using a SCART cable To connect your receiver to the local power supply system supporting a voltage range of 100 240 V 50 60 Hz Fig 3 To switch the receiver between standby and working mode To disable enable the audio outputs of the receiver In viewing mode to switch to a channel by entering its number In menu mode to enter numeric values No function Toggles between TV and RADIO mode To access the main menu and in menu to return to viewing mode Exits from the menu sub menu or cancels actions In viewing mode to change to the next previous channel In menu and channel list mode to move the cursor up down In viewing mode to decrease increase the volume In menu mode for navigation and to change settings in specific menus In viewing mode to open the channel list or confirm displayed messages In menu mode to open the menus and to confirm settings or changes To enter the Electronic Programme Guide Shows the current channel information 2x extended info To increase decrease the volume level Opens the favourite group selection To open the list of audio languages and settings To zoom into a specific area of the video further pressing increases zoom factor and zoom modes In viewing mode to switch through the channels
32. lect the menu item and press OK to remove the USB device from your receiver safely Now you can disconnect the USB device after the message USB device is removed disappears 6 5 Records Press MENU and use gt to select Records then press OK Following submenus will be displayed Records List Record Setup Format and Remove USB device Use AY to select a submenu and press OK or B to access 16 www strong tv PART 2 English STRONG DIGITAL TV Before you use the recording functions of your receiver please ensure that your USB device is connected properly and that it is formatted in the reguired file system This will enable you to watch and manage recordings 6 5 1 Records List After selecting this menu a list of the recordings will appear on screen The recordings are stored in the folder SRT_RECORDS which is created on your USB device right after its connection to the receiver for the first time In this menu you can select a recording to playback rename record and delete To navigate to the upper folder of the USB disk use the RED button To select a recording use the A Y buttons and OK to watch in preview mode or P to start palyback in full screen mode Rename Use the A Y buttons to select a recording you wish to rename and press the GREEN button On screen will appear an alphabet to choose from Use the A Y and lt gt buttons to select a letter and OK to choose it Switching between upper and lower case let
33. lete all of the stored channels and settings from your receiver 6 2 Channel search In the menu Channel Search you can adjust your search settings and perform an automatic or manual channel search Press MENU and use lt gt to select Channel Search then press OK Following submenus will be displayed Search Setup Auto Search and Manual Search Use A to select a submenu and press OK or P to access 6 2 1 Search Setup In the menu Search setup you can set the antenna power and the country in which you live Country Use the lt P buttons to change the country Antenna Power If you use an antenna that can be amplified i e an active indoor outdoor antenna and it requires a voltage of 5 V and doesn t consume more than 60 mA then you can set the antenna power to On If you use an antenna without an amplifier or your antenna is already amplified by an external power supply or if you use an antenna from a house distribution system please keep the antenna power Off 6 2 2 Auto Search After selecting this menu item and pressing OK you will be asked to enter the PIN code DEFAULT PIN 0000 in order to update the current channel list If you don t want to perform a full channel scan you can press EXIT to cancel After entering the PIN code DEFAULT PIN 0000 the receiver will perform an automatic channel search through all frequencies and after finishing this process it will update the channel list During the search process the receiver wi
34. ll display the progress bar the currently scanned frequency and the channel names The receiver will add all new found channels to the channel list 6 2 3 Manual search In this menu you can search for channels on a specific frequency or channel This menu requires knowledge of some parameters in order to search on the correct channel frequency in your area Scan mode Use lt P to choose between By Channel and By Frequency If you set the scan mode By Channel then the following is available Band Use lt P to choose UHF Ultra High Frequency or VHF Very High Frequency Frequency channel Select a frequency channel on which you would like to search for the channels If you set the scan mode By Frequency then the following is available Frequency Use 0 9 to enter the frequency on which you would like to search for channels 12 www strong tv PART 2 English STRONG DIGITAL TV Band For the VHF frequency band commonly used 7 MHz for UHE frequency 8 MHz is used Signal level and quality indicators will help you ensure that you have signal on the selected frequency channel or frequency entered as well as to adjust the antenna if necessary After you have entered the settings correctly you will need to select Search directly above the signal bars and press OK The receiver will start to search for channels and if available with your entered parameters they will be added to the channel list If you don t get a sati
35. ng mode Proceed as described for any other channels you wish to skip You can also correct the channel selection by pressing the GREEN button again Channels marked for skipping will stay accessible within the channel list To lock a channel of the channel list use the A V buttons to select the channel then press the YELLOW button Now next to the channel s name the symbol is shown After that channels marked with will request the PIN code DEFAULT PIN 0000 when switching to it Proceed as described for any other channels you wish to lock You can also correct the channel lock by pressing the YELLOW button again To delete a channel use the A Y buttons to select the channel then press the BLUE button Now you will be asked if you want to delete this channel Press OK to confirm or EXIT to cancel The channel s you delete from the channel list will be permanently removed also if this channel is part of the favourite list To add a channel to a favourite group use the A Y buttons to select the channel then press the FAV button Now the favourite group selection will be shown Select the group to which the channel should be added with A Y and press OK The selected channel will be marked with the symbol Additionally you can also select another favourite group where to add this channel To do so press OK at the this group When you have added the channel to the group s press EXIT to go back to the channel list There you can proce
36. ofile 30p Mbit s LPCM MPEG 4 H 264 Main Divx 4 12 Divx 5 x Profile and High Divx 6 Xvid 1 00 AAC Profile Level 4 0 mp4 mov Mp4 QTFE Xvid 1 01 Xvid HEAAC ger as Po jg MPEG 4 Simple s 1 02 Xvid 1 03 mp3 23 VS profile and Xvid 1 10 beta1 2 Advanced Simple H 264 Profile Level 5 MPEG H264 Main MP2 1 2 4 Profile and High MP3 20 Profile Level 4 1 mkv Matroska 1 mice AAC ss Mbit s MPEG4 Simple TEPAT NX NICH VENAT P H264 Profile and LPCM 25 Advanced Simple Mbit s Profile Level 5 MPEG 2 MPEG ipa MPEG 2 Main DivX 4 DivX 5 Divx 6 Xvid 1 00 MP3 Pronile divx avi AVI 1 0 2 0 Xvid 1 01 Xvid LPCM 1920x1080 20 MPEG 4 Simple E N DMFO 1 2 nce ADPCM 30p Mbit s Profile and 1 02 Xvid 1 03 E Xvid 1 10 beta1 2 AAC Advanced Simple H 264 HEAAC Profile Level 5 JPEG av NOT JPEG C he II mp4 mkv Matroska ST 30p Melis Sorenson H 263 fv flv Sorenson H 263 MP3 1920x1080 20 H264 Main Sip H264 AAC 30p Mbit s Profile and High Profile Level 4 0 MPEG 4 Sorenson 1920x1080 20 3gp bez H 263 30p Mbit s ut 1920x1080 20 AVS Jizhun profile ki 5 AVS 30p Mbit s Level 6 0 H 23 www strong tv STRONG PART 2 English DIGITAL TV Audio specifications Audio Codec File Extension BitRate SamplingRate MPEG Layer MP3 32 Khe 48 kHz Samping rate MPEG Layers MP3 32 Khe 48 KH Samping rate OGG Vobis OGG sane 4 NS Ya U Te wa ms use WM
37. ons and press OK to proceed If the USB device is detected successfully you will be asked to enter your PIN code DEFAULT PIN 0000 The receiver will start the update process now and the progress information will be shown Please wait until the update is finished After the update has been completed the receiver will reboot automatically WARNING After the update the receiver restarts automatically During this process NEVER disconnect the receiver from the main the USB device or switch the power OFF This can damage your receiver and warranty will void 6 4 5 Software update via terrestrial signals Your receiver can update software via digital terrestrial broadcast as well You can find out via your local support or dealer whether there is a new software version broadcasted in your area When you know that there is an update available enter the menu OAD Upgrade in the Tools menu and press OK to continue The further steps will be shown on screen Please read the instructions carefully to update your receiver successfully During the update a progress banner will be displayed for your reference WARNING During the update process NEVER disconnect the receiver from the main switch the power OFF or disconnect the antenna cable This can damage your receiver and warranty will void After the update has been finished the receiver restarts automatically 6 4 6 Remove the USB device This menu item only appears if a USB device is connected Se
38. ower consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your local dealer or contact the appropriate service 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty conditions make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could damage the product and void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below m Refer to the user manual of your TV and your antenna m Make sure that all the connections cables and outdoor components are in a good condition and all the connections are well shielded and from good quality We recommend using high quality HDMI cables at least corresponding to HDMI 1 3 standard www strong tv PART 2 English STRONG DIGITAL TV This manual provides complete instructions
39. ration and to any shock which may cause permanent damage to your receiver or to any magnetic objects such as loudspeakers transformers etc Do not use a damaged power cord It may cause a fire or an electric shock Do not toucha power cord with wet hands It may cause an electric shock m When the receiver is not used for a long period of time you should unplug the power cord from the wall socket Do not use alcohol or ammonia based liquids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the mains voltage supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock m Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside Safety Precautions m Never open the receiver cover It is dangerous to touch the inside of the receiver due to high voltages Opening the receiver will void the warranty of the product Refer all maintenance or servicing to suitably qualified personnel m When you are connecting cables be sure that the receiver is disconnected from the mains supply voltage Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical p
40. sfying result after the search process please contact the local service or check reliable websites magazines if the entered values are correct 6 3 System Setup Press MENU and use lt P to select System Setup then press OK Following submenus will be displayed Language Setting Output Setting Time Setting Auto Standby Parental Guidance and Reset Factory default Use A Y to select the desired submenu and press OK or P to access 6 3 1 Language Setting In this menu you can set your language of chioce for menu audio and subtitles OSD Language Use lt P to select menu language Audio Language Digital TV allows transmitting more than one audio track language If a channel has multiple audio tracks languages the receiver will select the suitable audio track language automatically according to your selection Subtitle Language This setting allows you to define the subtitle language Use lt gt to select a subtitle language and the receiver will display the subtitles in this language automatically if available If you do not want to display subtitles then adjust the setting to Off NOTE Subtitles will be displayed when available Availability depends on the local broadcast Please also consider that events may contain built in subtitles which can t be disabled 6 3 2 Output Setting In this menu you can set the output parameters of the receiver according to the connected TV set and for the connected audio amplifier if
41. sition and Check the signal level and quality see does not provide the necessary chapter 5 3 2 signal level anymore 20 www strong tv PART 2 English STRONG DIGITAL TV Problem Possible reason Remedy Message No The channel is scrambled Either you have tuned to a channel which rights or Pay TV channel is not part of your subscription or you have not been patient enough to wait until the channel of your basic subscription has opened If the problem persists please contact the support of your service provider Support contact information can be found in the enclosed brochure Not possible Batteries are exhausted wrongly Replace the batteries check the correct to control the inserted receiver with Receiver powered or switched off Plug in turn on the receiver polarity RCU and receiver the remote Remote not aimed correctly control Point your remote towards the front panel IR sensor obstructed disturbed Check for obstructions other possible influence The IR sensor is covered up by Remove obstacles between RCU and some object obstacle between receiver The receiver is switched off Turn the receiver ON Forgot your Consult your local dealer automatically PIN code The receiver Auto standby function enabled Disable adjust auto standby See chapter switches off 6 3 4 for details 8 0 TECHNICAL SPECIFICATION Tuner
42. t with the receiver using a good quality HDMI 1 3 or higher cable not included This connection supports the highest possible quality www strong tv STRONG PART 2 English DIGITAL TV 3 3 Connecting to TV with SCART cable Fig 6 The receiver is also eguipped with a SCART connector alternatively the TV set can be connected to the receiver using a good guality SCART cable 3 4 Connecting to TV with cinch cable Fig 6 Your receiver is also eguipped with Audio L R and VIDEO connectors As an alternative you can use these connections if your TV set doesn t have an HDMI connector 3 5 Connecting to a digital audio amplifier Fig 6 By connecting your receiver to a digital amplifier or home theatre system you can enjoy the best possible sound quality and multi channel audio depending on broadcast Connect your digital audio amplifier or home theatre system with a suitable cable to the S PDIF connector on the back of the receiver 3 6 Connecting to a digital A V receiver and TV using HDMI Fig 7 By connecting your receiver to an A V receiver or enhanced digital home theatre system with HDMI you will enjoy the best possible sound and picture quality as well as multi channel audio depending on broadcast Connect the HDMI output of the receiver to the corresponding input of your A V system and then connect the HDMI output of the A V receiver or home theatre system to your TV set Select the correct input on your A V system to watc
43. ters can be done with the Caps Off On button on screen To delete wrong characters you can select the button When you are finished entering the name select the OK button on screen and press OK on remote control To discard changes select Cancel and press OK or EXIT Lock Use the A Y buttons to select a recording you wish to lock and press the YELLOW button You will need to enter the PIN code The lock symbol will appear near the file To unlock the record select it again press the YELLOW button and enter the PIN code Delete To delete a recording use the PQbuttons to select the recording then press the BLUE button Now you will be asked if you want to delete this recording Press OK to confirm or EXIT to cancel The recording s you delete from the recordings list will be permanently removed from the USB disk WARNING Within Irdeto encrypted services some events may be protected and fast forward rewind will be limited or might not be possible If maturity rating is activated for a specific recording you need to enter your PIN Code MATURITY Rating PIN 0000 before playback can be started 6 5 2 Record Setup In this menu you can setup recording parameters Disk If your USB device consists of more than one partitions then you can select a partition you want to use for recording Record Time Period This value defines the default duration for the instant recording You can also edit this value when you press two times in viewing mo
44. u can also use the YELLOW button to go back to the previous day Alternatively you can also move from one day to the other one by using the lt P buttons across the events It is not possible to view information about past programmes To choose an event for watching press OK to open the timer settings The detailed timer setup is described in chapter 6 4 1 After the timer has been set up press EXIT to return to the EPG To close the EPG press EXIT again NOTE Event information will be displayed when available Availability depends on the broadcast 5 5 Selecting subtitle language Press SUB in viewing mode to display a list of available subtitle languages Use A Y to select a language and confirm with OK Please consider that this function supports DVB and TXT subtitles and this selection is only displaying them temporarily Subtitles may not be supported by every channel broadcaster Additionally please adjust your preferred subtitle language as described in chapter 6 3 1 Language Setting 5 6 Displaying Teletext To open the Teletext press the GREEN TEXT button in viewing mode Use the 0 9 buttons to enter the page number The coloured buttons allow you to jump directly to the pages as indicated in the bottom line You can also use the Y buttons to select the next previous page With the lt gt buttons you can select subpages Press EXIT to close the Teletext www strong tv STRONG PART 2 English DIGITAL TV 5 7 Using e
45. xternal USB storage devices We strongly recommend you to carefully read and follow the specified points mentioned in chapter 1 5 Usage of external USB devices Further please consider these points when you use your receiver with an external USB storage device Before you disconnect the USB device from the receiver we recommend using the Remove the USB device function which is available in several menus of your receiver If you have removed the USB device unintentionally then please reconnect it to be detected again m Well functioning multimedia playback is highly depending on the data rate supported by the connected USB device Especially for playback of video files and loading high resolution pictures a reading speed of min 10 15 MB sec is required As high data rates are not supported by all types of USB devices it is necessary to ensure that the used USB device can fulfil this requirement Mostly such data can be found on the website or specification sheet of the USB device manufacturer 5 8 Instant Recording Your new receiver allows you to make an instant recording of programmes you are watching Simply press to start the recording To enter the duration for the recording press again Use 0 9 to input the recording time For a recording duration of 45 min just enter 45 and press OK or for 1h 30 min just enter 130 and press OK During the recording a progress banner appears on the upper left corner of your TV screen To open
Download Pdf Manuals
Related Search