Quick Start Guild Click here
Contents
1. located at the bottom center of the display is highlighted 3 Press SAVE button to save the entry to your PERSONAL DATABASE NOTE From this point on this number will always be blocked from your phones REGARDLESS of the automatic SCREEN mode setting 4 NOTE When an entry is displayed and you are wanting it to only ring specific phones press the SELECT button until the remote receiver icon REMOTE 1 or REMOTE 2 etc and tape cassette located at the bottom of the display is highlighted Press SAVE button to save entry to the PERSONAL DATABASE Related information on this topic is found on pages 17 20 and 29 in the user manual2. www person to person net for help amp FAQs REVIEWING NEW INCOMING CALLS NIC 1 The red light on the P2P Console will flash when there are New calls The NIC can be reviewed by pressing the FORWARD or BACK buttons on the P2P Console Unit 2 The NIC entries can be DELETED or saved to your PERSONAL DATABASE 3 To delete the entry press the DELETE button twice To save the entry see ADDING ENTRIES below SCREENING UNIDENTIFIED INCOMING CALLS 1 In non screen mode The S box located in the lower left corner of the display is not highlighted Press the SCREEN button on The P2P Console once this will set the unit to SIMPLE screen mode Incoming calls that contain the messages OUT OF AREA or UNKNOWN NAME without a telephone number will automatically be blocked by the P2P Console and not be allowed to pass to the attached phones 2 The Timer feature can be used to screen calls only during desired times See page 18 in user manual SCREENING DENTIFIED INCOMING CALLS 1 An incoming call that is identified with a name or number can be blocked see ADDING ENTRIES below 2 The P2P Console is also capable of blocking groups of numbers See page 20 of the user manual ADDING ENTRIES TO PERSONAL DATABASE 1 Review your incoming calls using the FORWARD and BACK buttons on the P2P Console Unit 2 When an entry is displayed that you DO NOT want to ring your phone press the SELECT button until only the answering machine icon tape cassette
3. Person to Person The Person to Person system requires Caller ID service from your telephone company to use the Quick Start Guide features of this device If the unit only displays the See message INCOMING CALL contact technical support a phone service INEN PHONE and answering SET UP Py F machine or a 1 Plug the power supply transformer console into Fi combo phone a 120VAC outlet and the other end into the 7 5VAC e you arrel jack on the P2P Console Unit The unit should subscribe to beep and the display will show 12 00 voice mail then 2 Unplug your phone from the telephone wall jack a e Using the telephone cord supplied plug one end into ANS MACH port the telephone wall jack and the other end into the LINE IN jack on the P2P Console Unit 3 Plug the telephone cord from your phone into the PHONE jack on the back of the P2P Console Unit 4 The time clock will automatically set when an incoming call is received The P2P Console Unit will The remote receiver at right can expand the P2P Console for screening and routing of calls see page 29 in manual Note receivers are not LINEIN PHONE capable of routing calls to wireless multi handset systems From Telephone Wall Jack The unit is now ready to collect Caller ID information for all of your incoming calls To learn how to block or route calls read the information on the back or refer to the user manual
Download Pdf Manuals
Related Search