1 PNEUMATIC SPRAY GUN USER`S MANUAL model CSG
Contents
1. NTS NTS Sp z 0 0 tel 22 7520600 aes Sales Office fax 22 7520592 Narz dzia i Technika Serwisowa ul Warszawska 749 www nts com pl Borz cin Du y e mail nts nts com pl 05 083 Zabor w PNEUMATIC SPRAY GUN USER S MANUAL model CSG 245 RP series 010 55 mi PARTS LIST OFF OOO SPRAY GUN BODY FRONT NUT RELEASE TRIGGER HANDLE AIR PRESSURE CONTROLLER COMPRESSED AIR INLET PUMPING CHAMBER RELEASE DIFFERENTIAL VALVE 9 REAR NUT 10 ROD FOR PISTON WITHDRAWAL 11 CARTOUCHE CONNECTOR REDUCER 12 400ml SACHET 13 SACHET NOZZLE 14 310ml CARTOUCHE 15 SPECIAL TOOLS COND OB WD CAUTION This symbol draws your attention to the issues involving your safety Read them carefully and strictly follow them Cut off the pressure supply before carrying out any repairs maintenance and other operations Read the user s manual before using the spray gun and strictly follow its guidelines Contact your nearest dealer or authorised specialist personnel before performing any operations repairs maintenance Improper operation will render your warranty invalid When selecting the product to be pumped with the spray gun read its Material Safety Data Sheet MSDS to verify its compliance with the work environment and individual safety measures Never turn the spray gun outlet towards yourself other people animals and or objects other than those which are to be treated with the product Whi2. he compressed air supply to the spray gun before undoing the front nut Always check expiration date of all products being used NTS NTS Sp z 0 0 tel 22 7520600 a Sales Office fax 22 7520592 Narz dzia i Technika Serwisowa ul Warszawska 749 www nts com pl Borz cin Du y e mail nts nts com pl 05 083 Zabor w aaao Never insert cartouches which are damaged or not full 4 2 1 Undo the front nut 2 anticlockwise and remove it from the spray gun 4 2 2 Insert and block the sachet nozzle 13 in the nut 2 and put the sachet 12 in the pumping chamber 7 withdraw the piston if it is in front and push in the sachet ensuring that only the end to be cut off protrudes 4 2 3 Cutoff the sachet immediately after the closing metal band 4 2 4 Tighten up the front nut 2 with nozzle 13 installed at the end of the pumping chamber 7 Proceed clockwise 4 3 Cartouche insertion in the pumping chamber Before undoing the front nut 2 and cutting off the compressed air press the release trigger 3 to move piston 15 forward to make it possible to unscrew the sachet pusher cone if piston 15 comes loose during the operation 4 3 2 Hold the release trigger pressed to ensure that air keeps piston 15 in its forward position and prevents its turning while unscrewing the container pusher cone 16 4 3 1 Undo the front nut 2 anticlockwise and remove it from the spray gun 4 3 2 Unscrew cone 16 anticlockwise and take it o
3. ic cartouches and 400ml sachets 5 1 2 Always work in conditions suitable for certain products 5 2 Wrong use 5 2 1 The pumping of any other products than those listed in item 5 1 1 above 5 2 2 Any other use than specified in item 5 1 1 above Use the product MSDS to verify if it really matches your equipment operating conditions and that the personal protective equipment used by the operator is suitable for the treated material Wile using the spray gun hold ita minimum of 30 cm away from your face when you release the trigger because compressed air escaping from the discharge valve may seriously harm your face eyes ears etc 5 2 3 Use of loose products 5 2 4 Use of the spray gun without complete sealing of the front nut 2 6 NOISE LEVEL When trigger 3 is released the acoustic pressure level corresponds to scale a measured horizontally at a distance of 50 cm while gluing 7 SPRAY GUN OPERATION 7 1 Air flow and product pumping is possible when the following conditions are met The main pressure reducing valve and supply valve are open fig 2 The air gun pressure regulator is open fig 1 par 5 The release trigger 3 is operated manually 7 2 Sachet loading into pumping chamber see par 4 2 7 3 Cartouche loading into pumping chamber see par 4 3 7 4 Packaging removal and loading see par 4 4 7 5 Compressed air connection see par 4 1 7 6 Always cut off the pressure supply after finish
4. ing working with the spray gun If the cartouche or sachet are not empty yet close them tightly to ensure that they may be reused later 8 ADJUSTMENT OF OPERATING PARAMETERS In order to adjust the pressure with the pressure regulator fig 1 par 5 pull out theplastic knob and turn it anticlockwise to obtain a gradual increase of pressure and force with which the product is being pumped As soon as the parameters are set we recommend to push the knob back to block it Never exceed maximum allowable pressure 10 bar Read the product instructions for use and check the minimum working temperature 9 IGNITION HAZARD A fire hazard may occur depending on the type of product being used It is prohibited to smoke and use open fire during work with the spray gun 10 IF YOU HAVE PROBLEMS WITH THE EQUIPMENT PROBLEMS REASONS WHATTODO __ _ _ _ The product does not come out of No compressed air supply Check the supply hoses Open the pressure regulator see the spray gun when you release the par 8 adjustment of pressure parameters trigger fig 3 par 1 Poor and irregular product outflow The product is too thick or pressure Adjust the pressure using the regulator fig 1 par 5 is too low Increase the pressure if needed Check if the product and working temperature are suitable The pumping chamber is soiled The container has been opened Carefully clean all elements and replace the container Cut after f
5. inishing work incorrectly or damaged off the sachet end immediately after the closing metal tape see par 4 2 sachet insertion NTS NTS Sp z 0 0 tel 22 7520600 ee Sales Office fax 22 7520592 Narz dzia i Technika Serwisowa ul Warszawska 749 www nts com pl Borz cin Du y e mail nts nts com pl 05 083 Zabor w 11 CLEANING AND MAINTENANCE 11 1 Never expose the spray gun to contact with solvents or acids 11 2 Use only special detergents for spray gun cleaning 11 3 If the spray gun is used according to our guidelines it will not require any special maintenance 12 WARRANTY We guarantee the quality of our product If any element is defected due to the manufacturing process we will replace it free of charge provided that it is has not been soiled and or tampered with All pieces of the set must be delivered to our company The manufacturer shall not be held responsible for any damage or harm if the product is used for purposes other than those intended and contrary to the instructions for use Spray guns purchased in parts that is unassembled modified or incomplete usually do not have a warranty since they haven t been put to final tests unless these tests have been specially ordered by the buyer oo Ca G UT aaa e i I i d pae m r d some P Gelsa UUJ dd 576 J53 UUW
6. le using the spray gun always wear protective clothing and other protective equipment safety gloves goggles face guards overalls aprons etc according to the instructions provided in sprayed product Material Safety Data Sheet We recommend wearing safety goggles at all times 3 PACKAGING AND STORAGE The spray gun is delivered in an individual cardboard packaging sized 370 mm length x 280 mm width x 80 mm height white 8t 8343 thickness 2 8 3 mm low wave The spray gun is shipped in a polyethylene wrap 4 PREPARATION FOR WORK 4 1 Compressed air supply system Ci nienie robocze Working pressure 5 8 bar Ci nienie max Max pressure 10 bar The spray gun must be connected to a compressed air system in editors irene Reducerwihia fiter accordance with the diagram Min przep yw powietrza Min air flow 200 l min z men li Zaw r Valve The spray gun is equipped with a NIPPLE type pipe joint Max d ugo przewodu Max hose length 10 m external thread fig 1 par 6 which allows the connection of Minimalna rednica wewn trzna accessories according to applicable requirements Minimum inside diameter b 6mm Air consumption is limited and proportional to the number of product pumpings 4 2 Sachet insertion in the pumping chamber In order to avoid accidentall leakage of the product during its replacement in the piston chamber which may be dangerous for people nearby you must always remember to cut off t
7. ut of the spray gun 4 3 3 Screw the plastic nozzle on the cartouche clockwise the nozzle is provided with the cartouche then place the cartouche connector reducer onto the piston Make sure that the gasket adheres to front part of the spray gun Finally insert the cartouche and push piston 15 with the reducer to the end of the pumping chamber 7 4 3 4 Place the front nut 2 with white gasket and tighten it up clockwise until the cartouche is pressed down firmly 4 34 4 3 2 4 3 3 43 4 4 4 Cartouche removal and insertion 4 4 1 Undo the front nut 2 anticlockwise and remove it from the spray gun 4 4 2 Remove the cartouche 14 from the pumping chamber 7 4 4 3 Insert the rod for piston withdrawal 10 and screw it clockwise onto piston 15 4 4 4 Pull rod 10 and piston 15 to stroke travel end 4 4 5 Unscrew it anticlockwise and remove it 4 4 6 Remove the cartouche connector reducer 11 4 4 7 Insert cone 16 and screw it on clockwise 4 4 8 Tighten it with a 18mm spanner applying a little force 444 4 4 5 44 6 447 NTS NTS Sp z 0 0 tel 22 7520600 Sales Office fax 22 7520592 Narz dzia i Technika Serwisowa ul Warszawska 749 www nts com pl Borz cin Du y e mail nts nts com pl 05 083 Zabor w 5 DESCRIPTION 5 1 Correct use 5 1 1 The pumping of chemical bonding products silicone polyurethane cement adhesives etc provided in special containers 310ml aluminium or plast
Download Pdf Manuals
Related Search