user manual. - Battery Traders
Contents
1.2. BAINTECH Power Products Voltage Control Relay Installation Disconnect all batteries before commencing installation Ensure the auxiliary battery is mounted securely to prevent movement in any direction Location The Baintech VCR Voltage Control Relay should be mounted on a flat dry surface under the bonnet such as a firewall The Baintech VCR must be kept well away from any hot items such as exhaust systems or turbo chargers Cable Connecting Attach one end of the POSITIVE cable to the positive terminal of the auxiliary battery attach the other end of the cable to the VCR M6 screw terminal labelled 87 Attach one end of the POSITIVE cable to the positive terminal of the primary battery attach the other end of the cable to the VCR M6 screw terminal labelled 30 Attach one end of the NEGATIVE EARTH cable to the VCR terminal 86 using the spade connecter provided Connect the other end to the closest earth connection usually the mounting point of the VCR Attach one end of the cable to the negative terminal of the auxiliary battery using the correct sized lug connector Connect the other end to the closest earth connection usually the chassis on the motor vehicle For safety please ensure to use DC fuses on the positive cables where possible Refer to the installation diagram in Figure 1 Option If you want to use the emergency parallel feature you can make a switched connection with terminal mar
3. ked 85 Once this switch has been activated both starter and auxiliary batteries will connect together making starting easier For safety please ensure to use DC fuses on the positive cables where possible Refer to the installation diagram in Figure 1 Testing Reconnect the primary starting battery Start your Engine Set your multimeter on DC Volts Voltage Control Relay To test the Baintech VCR continually touch with Optional the red multimeter terminal point to the M6 Screw Parallel Dri Feature Earth terminal labelled Primary Battery 30 Then 85 86 continually touch the black multimeter terminal point to the negative VCR Earth point this is the mounting point of the Baintech VCR to the Vehicle chassis The voltage should quickly reach 13 2volts 26 4v 100AMP Fuse for 24v system this may vary in time depending on the type of vehicle Once the voltage reaches 13 2volts 26 4v you will hear an audible click the relay will open to allow current charge through to the Auxiliary Battery 87 This can simply be tested by continually touching with the red multimeter terminal point to the M6 Screw terminal labelled Auxiliary Battery 87 The Baintech VCR installation is now complete Auxiliary Battery Battery Starter Recommended Se Fa te www baintech com au C TA Bainbridae belles PO Box 1617 x Technologies Phone 1300 Cleveland QLD 4163 ee 224683 info baintech com au
Download Pdf Manuals
Related Search