Unit Table ERU-5000 Ezer
Contents
1. lift down to suitable position to make it suitable for patient to leave 6 Switch off the power unplug the power cord if don t use for a long time Maintenance 1 Daily maintenance If you don t use equipment frequently turn off the power switch Check Power line regularly if it s damage or aging 2 Replacing accessories There is no need to replace consumables frequently when abnormal situation occurs such as fuse burns replace the appropriate fuse type 3 Cleaning When cleaning the equipment please unplug the power cord of the machine Use a wet cloth to clean access to power supply when fully dry Do not clean the inside part Do not clean the power outlet with wet cloth 4 Notes of moving machine Please pull out the power plug when moving the unit ensure that all power is cut off Other equipments shall be removed to ensure that no parts will fall down Protect wires been not broken when moving 5 Service If anything abnormal during use first cut off the machine power then telephone sales company or service points for consultation IV Malfunction and Exclusion 1 The specifications of fuses a Power Supply AC220V 110V Input fuses F3A 5X20 mm 2pcs b Power Supply of Chair F6A 5X20 mm Ipc c External Socket AC220V F2A 5X20 mm Ipc 2 The method of changing fuses a Switch off power supply Unplug the power cord b Take off the fuses by removing the fuse cap with a screwdriver c Put the same size fuse rev2. of the machine Use a wet cloth to clean access to power supply when fully dry Do not clean the inside part 8 When there is failure or abnormal phenomenon during the use of this instrument please cut off the power immediately and contact us do not maintain personally 9 According to the principle of this product work methods and features no need to do disinfection and radiation protection 1 Contents Product eee 3 tc ccc ecards cer cnceeleledecasedeagedys son besten 3 2 Detailed explanation of Operation panel 3 insien 4 deel gn hd seaseanaes 4 2ZAdj stm nt 8 3 Testing and 8 9 1 Daily 9 2 Replacing 9 3 Cleamin 9 9 4 Notes of moving noes 9 EEN aa E owas ETRE anes 9 IV Malfunction and 9 1 The specifications of fuses 9 2 The method of changing 9 Vic SPOCHICANIONS 5 c tuvssyccatontoese saminda tiianaa seuse5os 10 Product Introduction 1 Main E
3. ERU 5000 COMBINED TABLE OPERATION MANUAL Introduction 1 Product introduction Combined Table ERU 5000 is a combinatorial system which could be used together with Auto Refractometer Phoropter Keratometer Slit Lamp and Chart Projector It makes the whole system work more conveniently and accurately Sliding table accommodates two instruments and provides with 90 degrees rotation Hand operated phoropter arm can swing up and down left and right Reclining Chair can smoothly lift up and down forward and backward with low noise It can be used with kinds of ophthalmic instruments and it s the ideal choice for hospitals clinics and optical shops Safety 1 Safety symbols and illustration 2 The use of environment and Notes 1 Read and understand all instructions 2 Operation should accord to the fuselage warnings and instructions 3 Please do not place or use the equipment near water do not use or place the equipment in wet areas 4 Keep the instrument on smooth ground Otherwise the falling of the unit can cause serious damage or injuries 5 For safety the machine has ground plug If you have no such outlet please install Do not use the adapter otherwise it will cause abolition of the security features 6 When equipment is installed please check the installation correctly and then access the total power cut off the power for a long time of stop using 7 When cleaning the equipment please unplug the power cord
4. ngine Arm support Panel of chart projector 2 Detailed explanation of Operation panel Instruction 1 Installation Make sure the installation space 5m 2m 2 4m Steps 1 Removable with scissors carton packaging tapes remove the carton and side panels 2 Take off the packing material take out the chair and remove the fixed screws which are used to fix the main unit with a spanner 3 Take out the main unit from the wooden pallet See Figure 1 Remove screws Figure 1 4 Installation of chair Correspond the holes on the chair and the chair stand fix them with screws See Figure 2 Fix the backrest with socket head screws Figure 2 5 Take off the packing material take out the table arm arm stand and the accessories 6 Installation of arm support first assemble the panel of chart projector on the arm support connect the connectors under the arm support arrange the wires orderly install the arm support on hole of the main unit open the side panels and fix the arm support tightly with screws at last cover the side panels See figure 3 7 Assemble the phoropter arm on the arm support and fix it with screws Attention 1 The limit situation of arm rotation 2 Make sure the cover of arm and fixed parts be tightly locked See figure 4 Step five install chair Figure 4 8 Installation of the table connect the wires under table support and the wires from Axis of
5. olve the fuse hat clockwisely replace the fuse Specification ERU 5000 Products Features A Class class I B Type B C Equipment belongs to common type D Equipment doesn t belong to type AP or APG Equipment operation continuous operation Non permanent equipment mobile device Unit size 1190 1055 1850mm Table Size 890 405mm Table rotation range 90 Table movable range 335mm Swing arm oscillation angle 35 Chair rotation range 60 Chair up and down range 540 690mm Chair loading ability 200 250kg Chair backrest obliquity 160 Lamp LED 24V 3W Electric Voltage AC220V 110V 50 60HZ Weight 200kg 10
6. rotation following rotation connect the table support and the Axis of rotation with screws install the wires cover and table support in the grooves which under the table support See Figure 5 Fixed screws of table board Arm cover Connectors Figure 5 2 1 Check if the main engine is placed stable 2 Turn the power switch power indicator light lights 3 Table rotation smoothly and flexiblely and sliding total range is 90 degrees 4 Arm swings and rotates smoothly and quietly and can be locked Total range is 90 degrees 5 Turn on the light and it can work normally 6 Check if the chair is steady turn on the power switch of chair it can up and down smoothly and quietly Total range is 15cm When chair up press the limit switch the chair will stop 7 Check if the power socket for Slit Lamp Keratometer and Auto Refractometer is ok 3 Testing and Operating 1 Rotate the table 90 degrees counterclockwise let the patient sit on the chair 2 Rotate the table 90 degrees clockwise in front of patient to check if you can use Auto Refractometer correctly 3 Turn on the Chart Projector to test the power Please refer to the operation manual of Chart Projector 4 Swing arm manually put the phoropter in front of patient s eyes placed inspectors adjust the chair to suitable height after using it and reset it 5 Rotate the table 90 degrees counterclockwise press the down button of chair
Download Pdf Manuals
Related Search