Home

DIR-632_User Manual_v.1.4.0_24.08.12_EN - D-Link

1. Figure 52 Configuring PPTP Dynamic IP WAN connection The expert settings mode The IP and Authorization via 802 1x protocol sections Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses If the checkbox is selected the Primary DNS automatically server and Secondary DNS server fields are not displayed Primary DNS server Enter addresses of the primary and secondary DNS servers in the Secondary DNS server relevant fields Vendor ID The identifier of your ISP Optional Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Enter the password provided by your ISP Select the checkbox to allow authorization in the ISP s network via the 802 1x protocol Page 69 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Secondary DNS server Vendor ID Authorization via 802 1x protocol _ Authorization in the ISP s network via Y 802 1x protocol Authentication method EAP MD5 Username Password Miscellaneous Enable RIP Enable IGMP Multicast NAT firewall Ping Figure 53 Configuring PPTP Dynamic IP WAN
2. Figure 113 The page for configuring the WPS function Page 138 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual To activate the WPS function select the WPS Enable checkbox and click the Change button When the checkbox is selected the Information and Connection sections are available on the page Parameter Description The PIN code of the router This parameter is used when connecting Default PIN code the router to a registrar to set the parameters of the WPS function The state of the WPS function e Configured all needed settings are specified e Unconfigured you need to specify the relevant settings ICONO tte Encryption key The encryption key specified for the WLAN Click the button to refresh the data on the page Reset to unconfigured Click the button to reset the parameters of the WPS function A method of the WPS function Select a value from the drop down list did PIN Connecting the device via the PIN code PBC Connecting the device via the push button actual or virtual The PIN code of the WPS enabled device that needs to be connected to the wireless network of the router PIN Code The field is displayed only when the PIN value is selected from the WPS Method drop down list Click the button to connect the wireless device to the router s WLAN Connect E via the WPS function
3. DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch August 2012 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Contents Chapter 1 Introduction vie ee ee eel ee eS iS od IS Sere ees 5 Contents and Audience deade bue a ia e E ee ee eee ee eee eee eee eens 5 CONVENCLONS us enot ons sie a A Shel ase ow A Si ee eats A Blas Ate one A one Si 5 DOCUMENE SELUCCUL O eii a gies 8a ID wd a e alee ds 5 Chapter 2 OVE EVLOW occ aeae a Sees Wee meee erie Soret ace sukad we i aia a are bee ged aus 6 General Information sa s a Sie aoe alee ee Se ee Sa ee Se ee Ae Ai See eS 6 Specifications sesasine A Shee teks A eral at Shalt fg SO eee og Sheen ee det ae Rete Br wee a e 7 Product AppeakalGe sovo ads ud RS Bea AA A IA Rcd ale ial Pine BR ace ace cal 13 Top Panel and Right Side Pane des iss sesi o a SNE eee ba Wie weet te 13 Back Panels iria a be edhe a wad rer ble Ale eA ge Cote Ta ghee Beare tele G dusted 14 Delivery Package sa unii A o 15 Chapter 3 Installation and Connecti0N o o ooo oooooo ooo 16 Before Yo Began ii A A weighs ise eee a G Sade a Es 16 Connecting to Plis IS BNE Sen Te AA Sel Sa eR Ew Bia ee glee eS 18 PG wWrth Ethernet Adapter ii A wide eels Site E Sie lai ete ee ten a 18 Obtaining IP Address Automatically in OS Windows XP ooooooooooooooo 18
4. 6 In the opened window in the list of available wireless networks select the wireless network DIR 632 and click the Connect button Not connected ts mil Connections are available Wi Fi A wireless router wl Open Network and Sharing Center Figure 14 The list of available networks 7 Wait for about 20 30 seconds After the connection is established the network icon will be displayed as the signal level scale If you perform initial configuration of the router via Wi Fi connection note that immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings Page 29 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual Connecting to Web based Interface When you have configured your computer you can access the web based interface and configure needed parameters create a WAN connection change the parameters of the wireless network specify the settings of the firewall etc 1 Start a web browser see the Before You Begin section page 16 2 In the address bar of the web browser enter the IP address of the router by default the following IP address is specified 192 168 0 1 Press the Enter key File Edit View Bookmarks Widgets Tools Help e Mbs 1B 192 160 0 x L Figure 15 Connecting to the web based interfac
5. up of the router Username A username login to access the Internet Select the checkbox if you don t need to enter a username and password to access the Internet A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes VPN server address The IP or URL address of the PPTP or L2TP authentication server Without authorization Page 64 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Select a method of MPPE encryption No encrypt MPPE encryption is not applied MPPE 40 128 bit MPPE encryption with a 40 bit or 128 bit key is applied Encryption MPPE 40 bit MPPE encryption with a 40 bit key is applied MPPE 128 bit MPPE encryption with a 128 bit key is applied MPPE encryption can be applied only if the MS CHAP MS CHAP V2 or AUTO value is selected from the Authentication algorithm drop down list Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value MTU The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the requi
6. After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 79 Page 49 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Dynamic IP Connection Click n Connect Connection name dynamic_internet_2 Obtain DNS server addresses T automatically Use this switch to enter or exit the expert de rer lt Back Next gt Figure 35 Configuring Dynamic IP WAN connection In the Connection name field specify a name for the connection for easier identification If your ISP has provided the addresses of the DNS servers deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 50 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Connection name dynamic_internet_2 Ethernet Obtain DNS server addresses automatically Vendor ID Authorization via 802 1x protocol Authorization in the ISP s network via E 802 1x p
7. For further use of groups of ports for VLAN it is required to save the changed settings to the non volatile memory of the router and reboot it click the Save amp Reboot line in the top page menu displayed when the mouse pointer is over the System caption Page 149 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual UPnP On the Advanced UPnP page you can enable and disable the UPnP function UPnP is a set of networking protocols designed for automatic configuration of network devices The UPnP function performs automatic configuration of the device s parameters for network applications requiring an incoming connection to the router Advanced UPnP Enabled Change Figure 118 The Advanced UPnP page If you want to enable the UPnP function in the router select the Enabled checkbox and click the Change button If you want to manually specify all parameters needed for network applications deselect the Enabled checkbox and click the Change button Page 150 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual DDNS On the Advanced DDNS page you can define parameters of the DDNS service which allows associating a domain name with dynamic IP addresses Advanced DDNS client configuration DDNS
8. Without authorization Page 122 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Select a method of MPPE encryption No encrypt MPPE encryption is not applied MPPE 40 128 bit MPPE encryption with a 40 bit or 128 bit key is applied Encryption MPPE 40 bit MPPE encryption with a 40 bit key is applied MPPE 128 bit MPPE encryption with a 128 bit key is applied MPPE encryption can be applied only if the MS CHAP MS CHAP V2 or AUTO value is selected from the Authentication algorithm drop down list Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value MTU The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Advanced options of the pppd daemon which need to be specified Extra options for this connection Optional Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated Static IP Address Fill in the
9. l Place the router in an open location in the supposed center of your wireless network Do not plug the power adapter into the router Turn off your PC Unplug the Ethernet cable that connects your PC to your modem from your computer and place it into the INTERNET port of your router Plug another Ethernet cable into one of the four LAN ports on the router Plug the other end into the Ethernet port of your PC Turn on your modem Wait until the modem is booted about 30 seconds Plug the power adapter to the router and connect to an electrical outlet or power strip Wait until the router is booted about 30 seconds Turn on your PC Verify the LEDs of the router The following LEDs should be on Power LAN of the relevant Ethernet port and Internet If not make sure that your computer modem and router are powered on and the relevant cables are connected correctly Page 195 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Abbreviations and Acronyms User Manual CHAPTER 6 ABBREVIATIONS AND ACRONYMS 3G Third Generation AC Access Category AES Advanced Encryption Standard ARP Address Resolution Protocol BSSID Basic Service Set Identifier CDMA Code Division Multiple Access CINR Carrier to Interference Noise Ratio CRC Cyclic Redundancy Check DDNS Dynamic Domain N
10. 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Creating PPPoE WAN Connection To create a connection of the PPPoE type click the Add button on the Net WAN page On the opened page select the PPPoE value from the Connection Type drop down list and specify the needed values General settings Provider f P Manually Yy Connection Type PPPoE Port internet Name pppoe_internet_2 Enable Y Direction WAN Ethernet MTU 1500 MAC y v 2 Figure 79 The page for creating a new connection The General settings and Ethernet sections Parameter Description General settings Provider Leave the Manually value A physical or virtual interface to which the new connection will be assigned Select the USB WIMAX value to assign this connection to the WiMAX USB modem A name for connection for easier identification Select the checkbox to enable the connection The direction of this connection The maximum size of units transmitted by the interface Page 99 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MA
11. Figure 103 The section for creating MAC IP pairs To create a MAC IP pair click the Add button In the IP field enter an IP address which will be assigned to the device from the LAN then in the MAC field enter the MAC address of this device In the Host field specify a network name of the device for easier identification optional Also you can create a MAC IP pair for a device connected to the router s LAN at the moment To do this select the relevant value from the Known IP MAC addresses drop down list the IP and MAC fields will be filled in automatically When all needed MAC IP pairs are specified click the Save button Existing MAC IP pairs are displayed in the table of the Static DHCP section To remove a pair select the checkbox in the relevant line in the table and click the Remove button Then click the Save button Page 127 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Wi Fi In this menu you can specify all needed settings for your wireless network Common settings On the Wi Fi Common settings page you can enable your wireless local area network WLAN Common settings Enable Wireless W MBSSID Disabled BSSID 20 10 B1 25 00 40 Change Figure 104 Common settings of the wireless LAN The Enable Wireless checkbox enables Wi Fi connections By default the checkbox is sele
12. MCS 13 62dBm at 64 QAM coding rate 3 4 MCS 14 61dBm at 64 QAM coding rate 5 6 MCS 15 Page 10 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Overview Firewall Functions e Network Address Translation NAT e Stateful Packet Inspection SPI e IP filters e URL filter e MAC filter e DMZ e Prevention of ARP and DDoS attacks e Virtual servers Configuration and Management e Multilingual web based interface for configuration and management e Access via TELNET e Firmware update via web based interface e Saving restoring configuration to from file e Support of remote logging e Automatic synchronization of system time with NTP server e Traceroute utility LEDs Power Internet WLAN USB SLAN LEDs e WPS Power External power adapter DC 5V 2 5A e Reset to Factory Defaults button Operating Temperature e from 0 to 40 C from 32 to 104 F Storage Temperature e from 20 to 65 C from 4 to 149 F Page 11 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Overview User Manual Operating Humidity e from 10 to 90 non condensing Storage Humidity e from 5 to 95 non condensing Page 12 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Overview User Manual Product Appearan
13. Obtaining IP Address Automatically in OS Windows T ooooooooooooooo ooo 21 PC wath WISET Adapte ge tee A A e wide AONE Seeds Sina Bah atte Meee Shee ats 26 Contiguriag Wi Fi Adapter In OS WINdOWS XP ois anire ie eld Sie ee el Ee Ae ee eee de 27 Conzlguring Wiki Adapter Im OS Windows Tet mutuae Sse pi e be oe Oe Ss 28 Connecting to Web based Interface o ooooooooooooocooooo ooo o 30 Web based Interface Structure o o oooo oo ooo ooo oo 32 Saving and Restoring SettingGS oo ooooooooooocococcooo ooo o o ooo ooo 36 Chapter 4 Configuring via Web based Interface 38 Click ni CONNECT ane A ti 38 Creating WAN Connection iia a A A a AA ag A A a ada 41 PPPOE CONNECCION A AE ge A A A ee A adie sie os erg ad 41 SEATTLE DLP CONNSCELON a A A ay ieee Sh I ae est A AA a a 46 Dynamic TR CONNECTION a a ii ele we dikes wb Be ir ange 50 PPIP OE G2TP CONNECELON da a Ad A ene pig Be da ENTE tod 54 PPIB gt E Static DE Or L20P iStatic TBRCONASEEION aa da 58 PPIP F Dynamic LP or L2TPo PFP Dynamic TP sCONNECELON ve sacs a ni ii 67 3G CONECTO iii a Ge Bick ede A AAA A lo A A LIA AE A a Yeas ds 75 Checking Internet AVaLLabIlITV ted eerie aa eas eee ee eae AS A eee nel A a Ea 79 Contrguring Wireless Connection A a aia aa 80 Configuring IPTV seess is a e a A A A A de a 81 Wireless Network Settings WiZard o oo oooooooo ooo o o 82 Virtual Server Settings Wizard
14. The Internet Protocol TCP IP Properties window 5 Click the OK button in the connection properties window Now your computer is configured to obtain an IP address automatically Page 20 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual Obtaining IP Address Automatically in OS Windows 7 1 Click the Start button and proceed to the Control Panel window 2 Select the Network and Sharing Center section If the Control Panel has the category view the Category value is selected from the View by drop down list in the top right comer of the window choose the View network status and tasks line under the Network and Internet section Pes GO A Control Panel All Control Panel Items v 49 Search Control Panel Pp Adjust your computer s settings View by Largeicons ra EN v A amp Indexing Options Internet Options Keyboard Location and Other kk Network and Sharing Mouse Sensors Center Performance Information Parental Controls and Tools Notification Area Icons Bn g y amp amp fi Personalization Phone and Modem Power Options 3 ou BE E P kal Programs and Features 7 Recovery Region and Language RemoteApp and Desktop A A mn Lo AA Sound 15 Speech Recognition Sync Center Ba System Taskbar and Start Menu Troubleshooting R User Accounts 8 Windows
15. functions minimize threats of hacker attacks prevent unwanted intrusions to your network and block access to unwanted websites for users of your LAN You can configure and manage the settings of the multifunction wireless router DIR 632 via the user friendly web based interface the interface is available in several languages 1 Not included in the delivery package D Link does not guarantee compatibility with all USB modems Please refer to the Supported USB Modems section page 193 Page 6 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Overview User Manual Specifications WAN Interface 110 100BASE TX Ethernet port for cable or DSL modem or private Ethernet line LAN Interface e 8 10 100BASE TX Ethernet ports WLAN Interface IEEE 802 11b g n USB Interface USB 2 0 type A port for USB modem storage or printer Network Functions WAN connection types o 3G o PPPoE o Static IP o Dynamic IP o PPTP L2TP o PPTP L2TP Static IP o PPTP L2TP Dynamic IP Support of IEEE 802 1X for Internet connection DHCP server and client DNS relay VPN pass through PPTP L2TP Dynamic DNS e Static IP routing Remote management e Network statistics for each interface IGMP Proxy e RIP UPnP The device features are subject to change without notice For the latest versions of the firmware and relevant documentation visit www dlink ru Page
16. 1x protocol sections Parameter Description Obtain DNS server addresses automatically Primary DNS server Secondary DNS server Select the checkbox to configure automatic assignment of DNS server addresses If the checkbox is selected the Primary DNS server and Secondary DNS server fields are not displayed Enter addresses of the primary and secondary DNS servers in the relevant fields Page 120 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Vendor ID The identifier of your ISP Optional Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Enter the password provided by your ISP Miscellaneous Select the checkbox to allow authorization in the ISP s network via the 802 1x protocol Enable RIP Enable IGMP Multicast v NAT Y firewall Y Ping Figure 98 The page for creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multi i i able IG ulticast network e g video streaming to be recei
17. C o typical 12 5dBm 1 5dB at MCS 6 14 at 25 C o typical 8 5dBm 1 5dB at MCS 7 15 at 25 C EIRP Effective Isotropic Radiated Power e 802 11b o 18dBm typical e 02 1lg o 16dBm typical e 802 11n o 16dBm for MCS 7 typical o 8 5dBm for MCS 15 typical Receiver Sensitivity 802 11b typical at PER 8 o 83dBm at 11Mbps o 89dBm at 2Mbps Page 9 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Overview e 802 11g typical at PER 10 1000 byte PDUs O O O O O O O O 82dBm at 6Mbps 81dBm at 9Mbps 79dBm at 12Mbps 77dBm at 18Mbps 74dBm at 24Mbps 70dBm at 36Mbps 66dBm at 48Mbps 65dBm at 54Mbps e 802 11n typical at PER 10 1000 byte PDUs O O O HT20 82dBm at BPSK coding rate 1 2 MCS 0 79dBm at QPSK coding rate 1 2 MCS 1 77dBm at QPSK coding rate 3 4 MCS 2 74dBm at 16 QAM coding rate 1 2 MCS 3 70dBm at 16 QAM coding rate 3 4 MCS 4 66dBm at 64 QAM coding rate 2 3 MCS 5 65dBm at 64 QAM coding rate 3 4 MCS 6 64dBm at 64 QAM coding rate 5 6 MCS 7 HT40 79dBm at BPSK coding rate 1 2 MCS 8 76dBm at QPSK coding rate 1 2 MCS 9 74dBm at QPSK coding rate 3 4 MCS 10 71dBm at 16 QAM coding rate 1 2 MCS 11 67dBm at 16 QAM coding rate 3 4 MCS 12 63dBm at 64 QAM coding rate 2 3
18. CardSpace 53 Windows Defender Pg Windows Firewall By Windows Update E Figure 6 The Control Panel window Page 21 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual 3 In the menu located on the left part of the window select the Change adapter settings line a fase A MU e OJEE gt Control Panel Network and Internet gt Sharing Center v 3 Search Control Panel Control Panel Home i r s View your basic network information and set up connections Manage wireless networks A gt See full map cl h E Change adapter settings iia Change advanced sharing This computer settings View your active networks Connect to a network You are currently not connected to any networks Change your networking settings e Set up a new connection or network Set up a wireless broadband dial up ad hoc or VPN connection or set up a router or access point Connect to a network Connect or reconnect to a wireless wired dial up or VPN network connection Choose homegroup and sharing options Access files and printers located on other network computers or change sharing settings See also Troubleshoot problems HomeGroup Diagnose and repair network problems or get troubleshooting information Internet Options Windows Firewall Figure 7 The Network and Sharing Center window Page 22 of 197 DI
19. GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically IP Address r Netmask Gateway IP address Primary DNS server Secondary DNS server gt Authorization via 802 1x protocol Authorization in the ISP s network via v 802 1x protocol Authentication method EAP MD5 Username gt Password gt Figure 92 The page for creating a new connection The IP and Authorization via 802 1x protocol sections Parameter Description IP Address Enter an IP address for this WAN connection Enter a subnet mask for this WAN connection Gateway IP address Enter an IP address of the gateway used by this WAN connection Page 114 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via
20. IP Address Netmask Gateway IP address Primary DNS server Secondary DNS server Authorization via 802 1x protocol Authorization in the ISP s network via Y 802 1x protocol Authentication method EAP MD5 Username Password Miscellaneous Figure 44 Configuring PPTP Static IP WAN connection The expert settings mode The IP and Authorization via 802 1x protocol sections Parameter Description IP Address Enter an IP address for this WAN connection Netmask Enter a subnet mask for this WAN connection Gateway IP address Enter an IP address of the gateway used by this WAN connection Primary DNS server Enter addresses of the primary and secondary DNS servers in the Secondary DNS server relevant fields Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Enter the password provided by your ISP Select the checkbox to allow authorization in the ISP s network via the 802 1x protocol Page 60 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Primary DNS server Secondary DNS server Authorization in the ISP s network via Y 802 1x protocol Authentication method Username Pas
21. Page 139 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Using WPS Function via Web based Interface To add a wireless device via the PIN method of the WPS function follow the next steps l 2 3 4 Select the WPS Enable checkbox Click the Change button Select the PIN value from the WPS Method drop down list Select the PIN method in the software of the wireless device that you want to connect to the router s WLAN de Click the relevant button in the software of the wireless device that you want to connect to the WLAN Right after that enter the PIN code specified on the cover of the wireless device or in its software in the PIN Code field Click the Connect button in the web based interface of the router To add a wireless device via the PBC method of the WPS function follow the next steps l 2 3 4 Select the WPS Enable checkbox Click the Change button Select the PBC value from the WPS Method drop down list Select the PBC method in the software of the wireless device that you want to connect to the router s WLAN 6 Click the relevant button in the software or press the WPS button on the cover of the wireless device that you want to connect to the WLAN Click the Connect button in the web based interface of the router Using WPS Function without Web based Interface You can add a
22. Service Host name User name Interface Update period min Figure 119 The Advanced DDNS page To add a new DDNS service click the Add button Page 151 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Advanced DDNS client editing DDNS Service DLinkDDNS Mi Host name Username User password y Interface WAN y Update period min Change Figure 120 The page for editing the DDNS service You can specify the following parameters Parameter Description DDNS Service Select a DDNS provider from the drop down list Hostname The domain name registered at your DDNS provider The username to authorize for your DDNS provider The password to authorize for your DDNS provider Select a WAN connection which IP address will be used to access Interface the DDNS service An interval in minutes between sending data with the IP address of Update period the interface specified in the field above to the relevant DDNS service Click the Change button To edit parameters of the existing DDNS service click the relevant service link On the opened page change the needed parameters and click the Change button To remove an existing DDNS service click the relevant service link On the opened page click the Delete button Page 152 of 197 DIR 632 Multifunction Wireless Ro
23. The page for creating a new connection The VPN section Parameter Description Select the checkbox to enable auto start of the connection upon the Connect automatically b oot up of the router Username A username login to access the server Select the checkbox if you don t need to enter a username and password to access the server A password to access the server Password confirmation The confirmation of the entered password to avoid mistypes VPN server address The IP or URL address of the PPTP or L2TP authentication server Without authorization Page 110 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Select a method of MPPE encryption No encrypt MPPE encryption is not applied MPPE 40 128 bit MPPE encryption with a 40 bit or 128 bit key is applied Encryption MPPE 40 bit MPPE encryption with a 40 bit key is applied MPPE 128 bit MPPE encryption with a 128 bit key is applied MPPE encryption can be applied only if the MS CHAP MS CHAP V2 or AUTO value is selected from the Authentication algorithm drop down list Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to the server even w
24. USB port of the router power on the printer then power on the router USB storage Print server Enable Disable print server O Change Figure 140 The USB storage Print server page To configure the router as a print server select the Enable Disable print server checkbox and click the Change button If you don t want to use the router as a print server deselect the Enable Disable print server checkbox and click the Change button Page 175 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual FTP On the USB storage FTP page you can enable the built in FTP server of the router to provide access to the USB storage for users of your LAN USB storage FTP _ Configuring FTP server USB storage ConnectedO Enable T Port 21 Change Figure 141 The USB storage FTP page You can enable the FTP server only when a USB storage is connected to the router in this case the Connected value is displayed in the USB storage field Select the Enable checkbox if needed change the router s port used by the FTP server in the Port field by default the standard port 21 is specified Then click the Change button To allow access to the content of the USB storage for users of your LAN proceed to the System Users page and create needed accounts To disable the built in FTP server of the router deselect
25. check enter the current code in the PIN code field then enter a new code in New PIN code and New PIN code confirmation fields and click the Enter button If upon one of the operations described above you have entered an incorrect value in the PIN code field three times the number of remaining attempts is displayed in the Attempts left field the identification card inserted into your USB modem is blocked PIN code management Attempts left PUK code Disable PIN check O New PIN code New PIN code confirmation Figure 136 Entering the PUK code For further use of the card enter the PUK code in the relevant field and then specify a new PIN code for your SIM card in the New PIN code and New PIN code confirmation fields Click the Enter button Page 170 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual WiMAX This menu is designed to operate WiMAX USB modems Information On the WiMAX Information page you can connect to the network of your WiMAX ISP to establish a high speed wireless connection to the Internet Information SSID Diode on modem Link status MAC address RSSI CINR Base station ID Transmit power Frequency Figure 137 The WiMAX Information page The following fields and controls are available on the page Parameter Description An ide
26. checkbox and enter a DNS server address in the Name servers list To specify several addresses press the Enter key and enter a needed address in the next line Then click the Change button To remove a DNS server from the system remove the relevant line from the Name servers field and click the Change button Page 153 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Routing On the Advanced Routing page you can add static routes routes for networks that are not connected directly to the device but are available through the interfaces of the device into the system You can add edit and delete routes here Destination network Destination netmask Gateway Via Interface Accessibility Figure 122 The Advanced Routing page To create a new route click the Add button Page 154 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Advanced Routing Destination network Destination netmask Gateway Metric Via Interface lt Auto gt Save Figure 123 The page for adding a static route You can specify the following parameters Parameter Description Destination network A destination network to which this route is assigned Destination netmask The destination networ
27. connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multicast l network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settings are configured click the Save button Page 102 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Creating Static IP WAN Connection To create a connection of the Static IP type click the Add button on the Net WAN page On the opened page select the Static IP value from the Connection Type drop down list and specify the needed values General settings Provider gt Manually v Connection Type Static IP Port internet Name static_internet_2 Enable 7 Direction WAN Ethernet MTU gt 1500 MAC gt gt v Figure 82 The page for creating a new connection The General settings and Ethernet sections Parameter Description General settings Provider Leave the Manually value A physical or virtual interface to which the new connection will be assigned Select th
28. connection The expert settings mode The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multi i i able IG ulticast network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Click the Next button to continue Page 70 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Connection name dynpptp_internet_2 Username Password Password confirmation VPN server address Figure 54 Configuring PPTP Dynamic IP WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP In the VPN server address field enter the IP or URL address of the PPTP or L2TP authentication server As a rule the specified settings are enough to configu
29. field if you want to use a static IP address to access the Internet PPP debug Select the checkbox if you want to log all data on PPP connection debugging The IP address assigned by the ISP Keep Alive Dial on demand Page 123 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Miscellaneous Enable RIP al NAT Y Y firewall Ping Figure 100 The page for creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Select the checkbox to enable protection against ARP and DDoS attacks When all needed settings are configured click the Save button Page 124 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual LAN To configure the router s local interface proceed to the Net LAN page IP Address 192 168 0 1 Netmask 255 255 255 0 Figure 101 Basic settings of the local interface If needed edit the basic
30. for connection for easier identification The value of the field specifies the type of the network to which the router connects Leave the auto value to let the router connect automatically to an available type of network or select a needed value from the drop down list For GSM USB modems only re varanasi eg ome ew RE tem Ann ie For cM mad oy i A number dialed to connect to the authorization server of the Dial number operator Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value Page 76 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description The maximum size of units transmitted by the interface Optional Select the checkbox if you want the router to keep you connected to the network of your operator even when the connection has been Keep Alive inactive for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Extra options In the field you van specify additional data for encryption or authentication Optional Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated Dial on demand S
31. is recommended not to select this checkbox Select the checkbox to enable protection against ARP and DDoS attacks When all needed settings are configured click the Save button Page 112 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Creating PPTP Static IP or L2TP Static IP WAN Connection To create a connection of the PPTP Static IP or L2TP Static IP type click the Add button on the Net WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Provider gt Manually v Connection Type PPTP Static IP Port internet Name statpptp_internet_2 Enable 2 Direction WAN Ethernet MTU 1500 MAC gt va Figure 91 The page for creating a new connection The General settings and Ethernet sections Parameter Description General settings Provider Leave the Manually value A physical or virtual interface to which the new connection will be assigned Select the USB WIMAX value to assign this connection to the WiMAX USB modem A name for connection for easier identification Select the checkbox to enable the connection The direction of this connection The maximum size of units transmitted by the interface Page 113 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G
32. lt requires a username and password When this type is selected you can specify a fixed IP address for the non protected network before configuring the tunnel L2TP Dynamic IP Figure 26 The page for selecting the connection type On the opened page select the needed choice of the radio button and click the Next button To create a WiMAX WAN connection on the opened page select the USB WiMAX choice and click the Next button the page is displayed only when a WiMAX USB modem is connected to the router Page 40 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Creating WAN Connection PPPoE Connection Click n Connect Connection name pppoe_internet_2 Username Password gt essee Password confirmation E antes n Use this switch to enter or exit the expert Cee mode lt Back Next gt Figure 27 Configuring PPPoE WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 41
33. of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual Saving and Restoring Settings Note that you should regularly save the changes of the router s settings to the non a volatile memory The router s web based interface displays the notification on unsaved changes at the top of the page o 9 oa System Language T Figure 22 The notification on unsaved changes Place the mouse pointer on the Notifications icon g to view the list of unsaved changes and click the relevant link You can save the router s settings via the top page menu displayed when the mouse pointer is over the System caption Q Q dl System me Language Reboot Save amp Reboot Save Backup Factory Logout pS ASIS ASS IRIS AOR ANGE A ANE MG AN EN Figure 23 The top page menu Click the Reboot line if you have already saved the router s settings Click the Save amp Reboot line to save new settings and immediately reboot the router Click the Save line to save new settings to the non volatile memory and continue configuring the device Also you can save the device s parameters via the Save button on the System Configuration page Click the Backup line and follow the dialog box appeared to save the configuration all settings of the router to your PC Also you can save the router s configuration to your PC via the Backup button on the System Co
34. of devices which will not be allowed to access the WLAN Filter mode MAC addresses MAC filter restrict mode Disabled 5 Allow Deny Change Figure 110 The MAC filter for the wireless network By default MAC filtering is not active the Disabled choice of the MAC filter restrict mode radio button is selected on the Filter mode tab To open your wireless network for the devices which MAC addresses are specified on the MAC addresses tab and to close the wireless network for all other devices select the Allow choice of the MAC filter restrict mode radio button and click the Change button To close your wireless network for the devices which MAC addresses are specified on the MAC addresses tab select the Deny choice of the MAC filter restrict mode radio button and click the Change button To add a MAC address to which the selected filtering mode will be applied proceed to the MAC addresses tab Page 135 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Filter mode MAC addresses MAC address Add MAC address list MAC address Delete Enter an address in the MAC address field of the MAC address adding section and click the Add button To remove a MAC address from the list of MAC addresses select the checkbox located to the right of the relevant MAC address in the MAC address list section and click
35. recommended not to change the default values The WMM function allows assigning priorities for four Access Categories AC AC_BK Background low priority traffic print jobs file downloads etc AC_BE Best Effort traffic from legacy devices or devices applications that do not support QoS AC_VI Video AC VO Voice Parameters of the Access Categories are defined for both the router itself in the Parameters of Access Point section and wireless devices connected to it in the Parameters of Station section Page 144 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual For every Access Category the following fields are available Parameter Description Arbitrary Inter Frame Space Number This parameter influences Aifsn time delays for the relevant Access Category The lower the value the higher is the Access Category priority Contention Window Minimum Contention Window Maximum Both fields influence time delays for the relevant Access Category The CWMax field value should not be lower than the CWMin field value The lower the difference between the CWMax field value and the CWMin field value the higher is the Access Category CWMin CWMax priority Txo Transmission Opportunity The higher the value the higher is the P Access Category priority Admission Control Mandatory ACM If selected pr
36. router s configuration from a previously created file System Configuration Save current settings Reset to factory defaults Factory Saving current configuration in a file Backup Loading previously saved Restore configuration to device Figure 146 The System Configuration page Page 182 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual The following buttons are available on the page Control Factory Backup Restore Description Click the button to save settings to the non volatile memory Please save settings every time you change the router s parameters Otherwise the changes will be lost upon hardware reboot of the router Click the button to restore the factory default settings Also you can restore the factory defaults via the hardware RESET button see the Saving and Restoring Settings section page 36 Click the button and follow the dialog box appeared to save the configuration all settings of the router to your PC Click the button to upload a previously saved configuration all settings of the router from a file on your PC Click the Choose Browse button to select a previously saved configuration file located on your PC Actions of the Save Factory and Backup buttons also can be performed via the top page menu displayed when the mouse pointer
37. settings and 3G sections Parameter Description General settings To automatically specify all settings required to connect to the Provider Internet select your country and operator from the drop down list To specify all settings independently leave the Manually value The value of the field specifies the type of the network to which the router connects Leave the auto value to let the router connect automatically to an available type of network or select a needed value from the drop down list For GSM USB modems only Page 96 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Username Without authorization E Password P esne Password confirmation D eesse APN Dial number Authentication algorithm AUTO MTU 1370 Keep Alive E Extra options Dial on demand A PPP debug a Figure 77 The page for creating a new connection The PPP section Parameter Description IN A number dialed to connect to the authorization server of the Dial number operator Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value The maximum size of units transmitted by the interface Optional Select the checkbox if you want the router to keep you connected to the network of your operator even when the connection has been Keep Alive inacti
38. specified on the Firewall DMZ page To disable the DMZ deselect the Enabled checkbox and click the Change button Page 165 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual MAC Filter On the Firewall MAC filter page you can configure MAC address based filtering for computers of the router s LAN You can add edit and delete addresses here MAC address Action Figure 132 The Firewall MAC filter page To specify a new address for the MAC filter click the Add button Page 166 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface MAC filter MAC address editing MAC address gt Action Allow Change Figure 133 The page for adding an address for the MAC filter On the opened page enter the MAC address of the device from the router s LAN in the MAC address field To choose a device connected to the router s LAN at the moment select the relevant value from the drop down list the field will be filled in automatically Then select the Deny value from the Action drop down list and click the Change button To remove an address from the list of MAC addresses for filtering select the line with the relevant MAC address On the opened page click the Delete button Page 167 of 197 DIR
39. the page see the LAN section page 125 To configure the router s WLAN parameters left click the SSID of the WLAN the right column of the SSID line After clicking the line the Wi Fi Basic settings page opens for the detailed description of the page see the Basic Settings section page 129 To configure connection to the Internet click the Click n Connect link in the Net section for the detailed description of the Wizard see the Click n Connect section page 38 To configure the router s wireless network click the Wireless network settings wizard link in the Wi Fi section for the detailed description of the Wizard see the Wireless Network Settings Wizard section page 82 To configure access from the Internet to a web server located in your LAN click the Virtual server settings wizard link in the Firewall section for the detailed description of the Wizard see the Virtual Server Settings Wizard section page 88 To configure the router to use an IPTV set top box click the IPTV settings wizard link in the IP tv section for the detailed description of the Wizard see the IPTV Settings Wizard section page 90 To configure all parameters of the router independently without the Wizards click the Advanced settings link in the bottom right corner of the page Page 33 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual Qu
40. the page you can change the name of your wireless network specify a password to it or disable Wi Fi connections Click n Connect If you want to connect a portable device laptop smartphone etc to the Internet via wireless connection Wi Fi then specify an individual name for the access point SSID and a password encryption key If you are not going to use devices which require wireless connection click Skip to next SSID DIR 632 Encryption Key PSK 76543210 Next gt Skip to next Figure 61 Configuring the wireless connection In the SSID field specify a new name for the network use digits and Latin characters In the Encryption Key PSK field enter a key a password that will be used to access your wireless network Use digits and Latin characters Click the Next button to continue Click the Skip to next button to disable Wi Fi connections After clicking the Next button or the Skip to next button the page for configuring the router to use an IPTV set top box opens see the Configuring IPTV section page 81 Page 80 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Configuring IPTV On the page you can configure the router to use an IPTV set top box If your ISP provides a service to IPTV you can connect a set top box directly to the router without using additional equipment To do
41. time field specify a period of inactivity in seconds after which the connection should be terminated Static IP Address Fill in the field if you want to use a static IP address for this connection PPP debug Select the checkbox if you want to log all data on PPP connection debugging The assigned IP address Page 56 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Authentication algorithm MTU Keep Alive LCP interval sec LCP fails Extra options Dial on demand Static IP Address PPP debug IP received Miscellaneous Additional settings of VPN tunnel Enable RIP NAT firewall Ping Figure 41 Configuring PPTP WAN connection The expert settings mode The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Select the checkbox to enable protection against ARP and DDoS attacks Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or th
42. to a minimum each wall or ceiling can reduce your wireless network range by 3 90 feet 1 30 meters 2 Be aware of the direct line between network devices Place your devices so that the signal travels straight through a wall or ceiling instead of at an angle for better reception 3 Building materials make a difference A solid metal door or aluminum studs may have a negative effect on your wireless range Try to position your router access points and computers so that the signal passes through drywalls or open doorways Materials and objects such as glass steel metal walls with insulation water fish tanks mirrors file cabinets brick and concrete will degrade your wireless signal 4 Keep your router away at least 3 6 feet or 1 2 meters from electrical devices or appliances that generate RF noise 5 If you are using 2 4 GHz cordless phones or X 10 equipment wireless devices such as ceiling fans lights and home security systems your wireless connection may degrade dramatically or drop completely Make sure your 2 4 GHz phone base is as far away from your wireless devices as possible Note that the base transmits a signal even if the phone in not n use Page 194 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Operation Guidelines User Manual Connecting to Cable or DSL Modem If you need to connect the router to a cable or DSL modem do the following
43. your wired ISP uses authorization via the 802 1x protocol in the Authorization via 802 1x protocol section select the Authorization in the ISP s network via 802 1x protocol checkbox and fill in the fields of the section in accordance with data provided by your ISP As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 46 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Connection name static_internet_2 Ethernet IP Address Netmask Gateway IP address Primary DNS server Secondary DNS server Use this switch to enter or exit the expert mode Figure 32 Configuring Static IP WAN connection The expert settings mode The Ethernet section Parameter Description Connection name A name for connection for easier identification The maximum size of units transmitted by the interface A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC address of the network interface card of the computer that is bei
44. 1094 commecton LAN or High Speed Internet Change Windows Firewall lt b Local Area Connection LAN or High Speed Internet 69 View available wireless networks BS Disable this network device Q Repair this connection Rename this connection 2 Change settings of this connection mee A Figure 11 The Network Connections window 3 Search for available wireless networks 4 In the opened Wireless Network Connection window select the wireless network DIR 632 and click the Connect button After that the Wireless Network Connection Status window appears If you perform initial configuration of the router via Wi Fi connection note that I immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings Page 27 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Installation and Connection Configuring Wi Fi Adapter in OS Windows 7 l Click the Start button and proceed to the Control Panel window 2 Select the Network and Sharing Center section If the Control Panel has the category view the Category value is selected from the View by drop down list in the top right corner of the window choose the View network status and tasks line under the Network and Internet section rm g Bl N p amp amp Adjus
45. 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual USB Modem This menu is designed to operate USB modems If the PIN code check for the SIM card inserted into your USB modem is not disabled then upon the first access to the pages of the USB modem menu under the current web interface session the page for checking the PIN code is displayed Enter the PIN code in the relevant field and click the Enter button Information On the USB modem Information page you can view data on the USB modem connected to the router USB modem Information huawei Model E1550 Revision 11 608 12 10 209 IMSI 250020151457134 IMEI 358705037121532 Signal level 41 Operator name MegaFon Mode 3G Figure 134 The USB modem Information page When a USB modem is connected to the router the following data are displayed on the page Parameter Description The manufacturer of your USB modem Model The alphanumeric code of the model of your USB modem The revision of the firmware of your USB modem 6 For GSM USB modems only For CDMA USB modems it is required to disable the PIN code check on the identification card prior to connecting the USB modem to the router Page 168 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Para
46. 7 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Overview e Support of VLAN WAN ping respond USB Modem e Auto connection to available type of supported network 3G 2G Enabling disabling PIN code check changing PIN code USB Storage e Built in FTP server e Print server e Access to storage via accounts e Access control for ext2 3 file systems Wireless Connection e Supported security settings o WEP o WPA WPA2 Personal e MAC filter PIN and PBC methods of WPS e WMM Wi Fi QoS e Advanced settings Frequency Range e 802 11b 2400 2497MHz ISM band e 802 11g 2400 2497MHz ISM band e 802 11n 2400 2483 5MHz ISM band Data Rate e 802 11b o 11 5 5 2 and 1Mbps e 802 11g o 54 48 36 24 18 12 9 and 6Mbps e 802 11n o 6 5 300Mbps 2 The listed functions are available for GSM USB modems only Page 8 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Overview User Manual Transmitter Output Power e 802 11b o typical 18dBm 1 5 dB at 11 5 5 2 and 1Mbps at 25 C e 802 11g o typical 17dBm 1 5dB at 6 18Mbps at 25 C o typical 16dBm 1 5dB at 24 36Mbps at 25 C o typical 14dBm 1 5dB at 48 54Mbps at 25 C e 802 11n o typical 16dBm 1 5dB at MCS 0 4 8 10 at 25 C o typical 14 5dBm 1 5dB at MCS 5 13 at 25
47. 97 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual CHAPTER 4 CONFIGURING VIA WEB BASED INTERFACE Click n Connect To configure a WAN connection click the Click n Connect link in the Net section Click n Connect Connect the ISP s Ethernet cable to the WAN Internet port of the device Please make sure that the WAN light is lit before clicking Next Figure 24 Configuring a WAN connection Connect the Ethernet cable provided by your ISP to the WAN port of the router Verify the relevant LED the Internet LED should be on Click the Next button to continue Page 38 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect configure a WAN connection of another type or you want to specify all settings for your 3G WAN connection independently Provider Manually v Figure 25 The page for selecting a 3G network operator On the opened page from the Provider drop down list select your country and operator if you are going to configure a 3G network connection or leave the Manually value if you are going to configure a wired or WiMAX WAN connection or you want to specify all settings for your 3G WAN connection independently Click the Next button to continue Page 39 of 197 DIR 632 M
48. C Address button E to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Username Without authorization FJ Password P enne Password confirmation O Service name Authentication algorithm AUTO MTU 2 1492 Keep Alive Dial on demand PPP IP extension Static IP Address gt PPP debug PPPoE pass through Figure 80 The page for creating a new connection The PPP section Page 100 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Username A username login to access the Internet e Select the checkbox if you don t need to enter a username and Without authorization password to access the Internet A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes The name of the PPPoE authentication server Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value The maximum size of units transmitted by the i
49. CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Filebrowser On the USB storage Filebrowser page you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage USB storage Filebrowser Name Size Type Date modified Figure 139 The USB storage Filebrowser page To view the content of the USB storage click the link with the name of the storage or storage partition The list of folders and files will be displayed on the page To proceed to a folder select it in the directory structure on the left part of the page To remove a folder or file click the delete link in the line corresponding to this folder or file For content of ext2 or ext3 storages or storage partitions the Change rule link is displayed on the page Click the link and in the opened window select a user to which you allow access to this folder or file Then click the Apply button Page 174 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Print Server On the USB storage Print server page you can configure the router as a print server Being configured in this way the router will allow your LAN users to share the printer connected to the USB port of the router To connect a printer to the router power off both devices Connect printer to the
50. DP gt Action ACCEPT IP Addresses For entering IP address type 32 as subnet bit mask field after IP addresses range o Source Destination You can specify either a port or port range and several 80 8080 or 400 500 Source Destination Change Figure 128 The page for adding a rule for IP filtering You can specify the following parameters Parameter Description IP filter rule editing Name O A name for the rule for easier identification A protocol for network packet transmission Select a value from the Protocol drop down list Select an action for the rule ACCEPT Allows packet transmission in accordance with the criteria specified by the rule DROP Denies packet transmission in accordance with the criteria specified by the rule IP Addresses Select the checkbox if you want to specify a range of IP addresses as IP address range ae g the source or destination IP address Page 160 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description The source host subnet IP address If the IP address range checkbox is selected specify the starting IP address of the range in the Source first field and the ending IP address in the Source last field If the IP address range checkbox is not selected specify the IP address of the host or subnet in the
51. Information The DIR 632 device is a multifunction wireless router supporting WiMAX 3G GSM and CDMA with a built in switch It provides a fast and simple way to create a wireless and wired network at home or in an office The router is equipped with a USB port for connecting a USB modem which can be used to establish connection to the Internet In addition to the USB port of the router you can connect a USB storage device which will be used as a network drive or a printer Also you are able to connect the multifunction wireless router DIR 632 to a cable or DSL modem or to a private Ethernet line and use a high speed Internet connection to successfully fulfill a wide range of professional tasks The built in 8 port switch enables you to connect Ethernet enabled computers game consoles and other devices to your network Using the DIR 632 device you are able to quickly create a wireless network at home or in your office which lets your relatives or employees connect to your wireless network virtually anywhere within the operational range of your wireless network The router can operate as a base station for connecting wireless devices of the standards 802 11b 802 11g and 802 11n at the rate up to 300Mbps The router supports multiple functions for the wireless interface several security standards WEP WPA WPA2 MAC address filtering WPS The multifunction wireless router DIR 632 includes a built in firewall The advanced security
52. M CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Select a method of MPPE encryption No encrypt MPPE encryption is not applied MPPE 40 128 bit MPPE encryption with a 40 bit or 128 bit key is applied Encryption MPPE 40 bit MPPE encryption with a 40 bit key is applied MPPE 128 bit MPPE encryption with a 128 bit key is applied MPPE encryption can be applied only if the MS CHAP MS CHAP V2 or AUTO value is selected from the Authentication algorithm drop down list Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value MTU The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Advanced options of the pppd daemon which need to be specified Extra options i for this connection Optional Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated Static IP Address Fill in the field if you want to use a static IP address to access the Internet PPP debug Select the checkbox if you wan
53. Manual Obtain DNS server addresses automatically Vendor ID Authorization in the ISP s network via E 802 1x protocol Miscellaneous Enable RIP Enable IGMP Multicast Figure 51 Configuring PPTP Dynamic IP WAN connection The expert settings mode The Ethernet Parameter section Description The maximum size of units transmitted by the interface A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Page 68 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Obtain DNS server addresses E automatically Primary DNS server Secondary DNS server Vendor ID Authorization via 802 1x protocol y Authorization in the ISP s network via Y 802 1x protocol Authentication method Username Password Miscellaneous Enable RIP
54. R 1 INTRODUCTION Contents and Audience This manual describes the router DIR 632 and explains how to configure and operate it This manual is intended for users familiar with basic networking concepts who create an in home local area network and system administrators who install and configure networks in offices Conventions Example Description Ts tody tent of the mana Before You Begin A reference to a chapter or section of this manual Quick Installation Qu pe A reference to a document Guide 192 168 0 1 A name of a menu menu item control field checkbox drop down Change list button etc Data that you should enter in the specified field l Information An important note Document Structure Chapter 1 describes the purpose and structure of the document Chapter 2 gives an overview of the router s hardware and software features describes its appearance and the package contents Chapter 3 explains how to install the router DIR 632 and configure a PC in order to access its web based interface Chapter 4 describes all pages of the web based interface in detail Chapter 5 includes safety instructions and tips for networking and connecting additional equipment Chapter 6 introduces abbreviations and acronyms used in this manual Page 5 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Overview User Manual CHAPTER 2 OVERVIEW General
55. R 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual 4 In the opened window right click the relevant Local Area Connection icon and select the Properties line in the menu displayed m E TS o ms SO E Control Panel Network and Intemet Network Connections 4p Search Network Connections Disable this network device Diagnose this connection Rename this connection Disable Status Diagnose Bridge Connections Create Shortcut Delete Properties Figure 8 The Network Connections window Page 23 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual 5 In the Local Area Connection Properties window on the Networking tab select the Internet Protocol Version 4 TCP IPv4 line Click the Properties button Networking Connect using iP ES This connection uses the following items Y 0 Client for Microsoft Networks M El QoS Packet Scheduler M 3 File and Printer Sharing for Microsoft Networks M Internet Protocol Version 6 TCP IPw6 AS Internet Protocol Version 4 TCP IP v4 Y Link Layer Topology Discovery Mapper 10 Driver Y Link Layer Topology Discovery Responder Description Transmission Control Protocol Internet Protocol The default wide area network pro
56. STALLATION AND CONNECTION Before You Begin Please read this manual prior to installing the device Make sure that you have all the necessary information and equipment Operating System Configuration of the multifunction wireless router DIR 632 supporting WiMAX 3G GSM and CDMA with a built in switch hereinafter referred to as the router is performed via the built in web based interface The web based interface is available from any operating system that supports a web browser Web Browser The following web browsers are recommended Windows Internet Explorer Mozilla Firefox or Opera For successful operation JavaScript should be enabled on the web browser Make sure that JavaScript has not been disabled by other software such as virus protection or web user security packages running on your computer Wired or Wireless NIC Ethernet or Wi Fi Adapter Any computer that uses the router should be equipped with an Ethernet or Wi Fi adapter NIC If your computer is not equipped with such a device install an Ethernet or Wi Fi adapter prior to using the router Wireless Connection Wireless workstations from your network should be equipped with a wireless 802 11b g or n NIC Wi Fi adapter In addition you should specify the values of SSID channel number and security settings defined in the web based interface of the router for all these wireless workstations Page 16 of 197 DIR 632 Multifunction Wireless Router Suppor
57. Source field To specify an IP address add 32 To choose a device connected to the router s LAN at the moment select the relevant IP address from the drop down list the field will be filled in automatically The destination host subnet IP address If the IP address range checkbox is selected specify the starting IP address of the range in the Destination first field and the ending IP address in the Destination last field If the IP address range checkbox is not selected specify the starting IP address of the host or subnet in the Destination field To specify an IP address add 32 Destination To choose a device connected to the router s LAN at the moment select the relevant IP address from the drop down list the field will be filled in automatically A port of the source IP address You can specify one port several ports separated by a comma or a range of ports separated by a colon A port of the destination IP address You can specify one port Destination several ports separated by a comma or a range of ports separated by a colon Click the Change button To edit a rule for IP filtering click the link to the relevant rule On the opened page change the needed parameters and click the Change button To remove a rule for IP filtering click the link to the relevant rule On the opened page click the Delete button Page 161 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA
58. USB Universal Serial Bus VLAN Virtual Local Area Network VPN Virtual Private Network WAN Wide Area Network WEP Wired Equivalent Privacy Wi Fi Wireless Fidelity WiMAX Worldwide Interoperability for Microwave Access WISP Wireless Internet Service Provider WLAN Wireless Local Area Network WMM Wi Fi Multimedia WPA Wi Fi Protected Access WPS Wi Fi Protected Setup Page 197 of 197
59. Web based Interface User Manual Parameter Description Primary DNS server Enter addresses of the primary and secondary DNS servers in the Secondary DNS server relevant fields Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Enter the password provided by your ISP Miscellaneous Select the checkbox to allow authorization in the ISP s network via the 802 1x protocol Enable RIP Enable IGMP Multicast Y NAT 9 firewall v Ping E Figure 93 The page for creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multicast network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Page 115 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configurin
60. When the Open or Shared value is selected the WEP Encryption settings section is displayed the section is unavailable for the wireless network operating modes which support the standard 802 11n Security settings Network Authentication Open y WEP Encryption settings Enable Encryption WEP Default Key ID 2 y Encryption Key WEP as HEX O Encryption Key WEP 1 Encryption Key WEP 2 Encryption Key WEP 3 Encryption Key WEP 4 Change Figure 108 The Open value is selected from the Network Authentication drop down list Parameter Description The checkbox activating WEP encryption When the checkbox is selected the Default Key ID field the Encryption Key WEP as Enable Encryption WEP HEX checkbox and four Encryption Key WEP fields are displayed on the page For the Shared authentication type the checkbox is always selected The number of the key from first to fourth which will be used for Default Key ID WEP encryption Encryption Key WEP as Select the checkbox to set a hexadecimal number as a key for HEX encryption Keys for WEP encryption The router uses the key selected from the Default Key ID drop down list It is required to specify all the fields You can specify keys containing 5 or 13 symbols use digits and or Latin characters If the Encryption Key WEP as HEX checkbox is selected you can specify only keys containing 10 symbols the digits 0 9 and the characters A F P
61. You can edit this connection or delete it Connection Type Direction Default gateway Dynamic IP internet WAN o Figure 75 The Net WAN page To create a new connection click the Add button On the page displayed specify the relevant values To edit an existing connection left click the relevant line in the table On the page displayed change the parameters and click the Save button To delete an existing connection left click the relevant line in the table On the page displayed click the Delete button To use one of existing WAN connections as a default gateway select the choice of the Default gateway radio button located in the line corresponding to this connection Page 95 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Creating 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem then prior to creating a 3G WAN connection proceed to the USB modem menu and enter the PIN code on the page displayed see the USB Modem section page 168 Then proceed to the Net WAN page click the Add button and select the 3G value from the Connection Type drop down list General settings Provider Manually v Connection Type 3G Port USB Name 3g USB 2 Enable Y Direction WAN 3G Mode PEx Figure 76 The page for creating a new connection The General
62. against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settings are configured click the Save button Page 105 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Creating Dynamic IP WAN Connection To create a connection of the Dynamic IP type click the Add button on the Net WAN page On the opened page select the Dynamic IP value from the Connection Type drop down list and specify the needed values General settings Connection Type Dynamic IP Port internet Name dynamic_internet_2 Enable Y Direction WAN Ethernet MTU 1500 MAC gt e Figure 85 The page for creating a new connection The General settings and Ethernet sections Parameter Description General settings Provider Leave the Manually value A physical or virtual interface to which the new connection will be assigned Select the USB WIMAX value to assign this connection to the WiMAX USB modem A name for connection for easier identification Select the checkbox to enable the connection The direction of this connection The maximum size of units transmitted by the interface Page 106 of 197 DIR 632 Multifunction Wireless Router Su
63. age 133 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual When the WPA PSK or WPA2 PSK value is selected the WPA Encryption settings section is displayed Security settings Network Authentication WPA2 PSK gt Encryption Key PSK 76543210 WPA2 Pre authentication Fl WPA Encryption settings WPA Encryption TKIP z WPA reneval 3600 Change Figure 109 The WPA2 PSK value is selected from the Network Authentication drop down list Parameter Description Encryption Key PSK A key for WPA encryption The key can contain digits and or Latin characters WPA2 Pre The checkbox activating preliminary authentication displayed only authentication for the WPA2 PSK authentication type WPA Encryption An encryption method TKIP AES or TKIP AES The time period in seconds at the end of which a new key for WPA WPA renewal encryption is generated When the value 0 is specified for this field the key is not renewed When you have configured the parameters click the Change button Page 134 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual MAC Filter On the Wi Fi MAC Filter page you can define a set of MAC addresses of devices which will be allowed to access the WLAN or define MAC addresses
64. age 74 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual 3G Connection Click n Connect Connection name Username Password Password confirmation APN Dial number Use this switch to enter or exit the expert A en Figure 57 Configuring 3G WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your 3G operator In the APN field for GSM USB modems only enter the access point name and in the Dial number field enter the number dialed to connect to the authorization server of the operator As a rule the specified settings are enough to configure a connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 75 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Connection name Mode PPP Username Without authorization Password k Password confirmation APN Dial number Authentication algorithm MTU Keep Alive LCP interval sec LCP fails Description A name
65. ame System DDoS Distributed Denial of Service DHCP Dynamic Host Configuration Protocol DMZ DeMilitarized Zone DNS Domain Name System DTIM Delivery Traffic Indication Message FTP File Transfer Protocol GMT Greenwich Mean Time GSM Global System for Mobile Communications IGMP Internet Group Management Protocol IMEI International Mobile Equipment Identity IMSI International Mobile Subscriber Identity IP Internet Protocol ISP Internet Service Provider L2TP Layer 2 Tunneling Protocol LAN Local Area Network LCP Link Control Protocol MAC Media Access Control MTU Maximum Transmission Unit NAT Network Address Translation NTP Network Time Protocol PBC Push Button Configuration Page 196 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Abbreviations and Acronyms User Manual PIN Personal Identification Number PPPoE Point to point protocol over Ethernet PPTP Point to point tunneling protocol PSK Pre shared key PUK PIN Unlock Key QoS Quality of Service R UIM Removable User Identity Module RIP Routing Information Protocol RSSI Received Signal Strength Indicator RTS Request To Send SIM Subscriber Identification Module SSID Service Set Identifier TKIP Temporal Key Integrity Protocol UDP User Datagram Protocol UPnP Universal Plug and Play URL Uniform Resource Locator
66. ame of the server On the opened page click the Delete button Page 164 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual DMZ A DMZ is a host or network segment located between internal local and external global networks In the router the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network On the Firewall DMZ page you can specify the IP address of the DMZ host DMZ Demilitarized zone settings Enabled l P address Change Figure 131 The Firewall DMZ page To enable the DMZ select the Enabled checkbox enter the IP address of a host from your network in the IP address field and click the Change button Note that when the DMZ is enabled all traffic coming to a port of the WAN interface of the router is directed to the same port of the specified IP address Also note that virtual servers have higher priority than the DMZ host In other words if there has been created a virtual server that directs traffic from external port 80 to a port of the device from the router s local network then entering http router_WAN_IP in the address bar users of the external network are directed to the specified port and IP address configured for the virtual server but not to port 80 of the device with the IP address
67. ameter Description IP Address Enter an IP address for this WAN connection Enter a subnet mask for this WAN connection Gateway IP address Enter an IP address of the gateway used by this WAN connection Page 104 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Primary DNS server Enter addresses of the primary and secondary DNS servers in the Secondary DNS server relevant fields Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Enter the password provided by your ISP Miscellaneous Select the checkbox to allow authorization in the ISP s network via the 802 1x protocol Enable RIP Enable IGMP Multicast Y NAT 9 firewall v Ping E Figure 84 The page for creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multicast i i network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection
68. based Interface User Manual Checking Internet Availability On the page you can check the WAN connection you have created Click n Connect Checking the Internet availability with the ping utility Address PEU Wet es ede tr Ute Wea See ate ea oA Arda Sete E Mea Utd ese Get Ut do qt et Mea ete ekg Checking the cable the cable is plugged Connection status down Failed to establish the connection May be not enough time to establish the connection Wait for several minutes and click the Recheck button If this does not help you may have made errors when entering the connection parameters or there may exist a problem on the ISP s side Recheck lt Back Figure 60 Checking the Internet availability In the Result section the status of the WAN connection and possible causes of malfunctions are displayed To recheck the status of the WAN connection enter the IP address or name of a host in the Address field or leave the value specified by default ya ru Then click the Recheck button Click the Back button to specify other settings Click the Next button to continue After clicking the Next button the page for configuring wireless connection opens see the Configuring Wireless Connection section page 80 Page 79 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Configuring Wireless Connection On
69. ce Top Panel and Right Side Panel Figure 1 Top panel view Mode Description Solid green The router is powered on When powered on the router is being loaded when Solid yellow loaded a malfunction of the router No light The router is powered off Solid green The Internet connection is on oe The WAN interface is active upstream or downstream Blinking green traffic Solid orange The Internet connection is being established No light The Internet connection is off Solid green The router s WLAN is on ee The WLAN interface is active upstream or downstream Blinking green traffic The router s WLAN is off A USB device is connected to the router s USB port A device computer is connected to the relevant port Solid green oe the connection is on The LAN port is active upstream or downstream traffic The connection is off Blinking green g gt The WPS button located on the right side panel of the router is designed to quickly add wireless devices to the router s WLAN A separate LED is located on the WPS button Mode Description Blinking blue Attempting to add a wireless device via the WPS function The wireless device is connected to the router s WLAN lights for several minutes No light The WPS function is not in use Solid blue Page 13 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Overview User Ma
70. ch in the bottom left corner of the page Page 58 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect NS ae as e MTU MAC IP IP Address Netmask Gateway IP address Primary DNS server Secondary DNS server Authorization via 802 1x protocol l Authorization in the ISP s network via 7 802 1x protocol Figure 43 Configuring PPTP Static IP WAN connection The expert settings mode The Ethernet section Parameter Description The maximum size of units transmitted by the interface A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Page 59 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect
71. cted If you want to disable your WLAN deselect the Enable Wireless checkbox The value from the BSSID drop down list is the unique identifier for your Wi Fi network You cannot change the value of this parameter it is determined in the device s internal settings Page 128 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Basic Settings On the Wi Fi Basic settings page you can configure basic parameters of the device s WLAN Basic settings Hide Access Point SSID DIR 632 Country RUSSIAN FEDERATION Channel auto gt Wireless mode 802 11 G When changing mode from B 7 G on any of the modes with N is recommended to re tune security Max Associated Clients o Change Figure 105 Basic settings of the wireless LAN Parameter Description If the checkbox is selected other users cannot see your Wi Fi Hide Access Point network It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN A name for the WLAN By default the value DIR 632 is specified It is recommended to specify another name for the network upon initial configuration use digits and Latin characters The country you are in Select a value from the drop down list The wireless channel number When the auto value is selected the router itself chooses the channel with the least in
72. ction Properties window on the General tab select the Internet Protocol TCP IP line Click the Properties button 4 Local Area Connection 2 Properties General Authentication Advanced 3 Connect using E D Link DFE 550TX 10 100 Adapter This connection uses the following items A O AF NWLink NetBIOS A Y NWLink IPX SPX NetBIOS Compatible Transport Prot Internet Protocol TCP IP lt Description Transmission Control Protocol Internet Protocol The default wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected Figure 4 The Local Area Connection Properties window Page 19 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual 4 Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons Click the OK button Internet Protocol TCP IP Properties General Alternate Configuration You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address Use the following DNS server addresses Preferred DNS serve Figure 5
73. dvanced DNS page as the DNS server address Deselect the checkbox so that the devices connected to the router obtain the address of the router as the DNS server address The start IP address of the address pool used by the DHCP server to Start IP ig distribute IP addresses to clients The end IP address of the address pool used by the DHCP server to distribute IP addresses to clients The lifetime of IP addresses leased by the DHCP server At the end of this period the leased IP address is revoked and can be distributed to another device unless the previous device has confirmed the need to keep the address The IP f th t 1 DHCP hich i IP External DHCP server IP e address o e ex erna server which assigns addresses to the router s clients When all needed settings are configured click the Save button Lease time In the Static DHCP section you can specify MAC address and IP address pairs set a fixed IP address in the local area network for a device with a certain MAC address The router assigns IP addresses in accordance with the specified pairs only when the DHCP server is enabled in the DHCP server section in the Mode drop down list the Enable value is selected Page 126 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Static DHCP Known IP MAC addresses lt Select IP MAC address gt IP MAC Host Add
74. e statpptp_internet_2 Username Password Password confirmation VPN server address Figure 47 Configuring PPTP Static IP WAN connection In the Connection name field specify a name for the connection for easier identification In the Username field enter your login and in the Password and Password confirmation fields the password provided by your ISP In the VPN server address field enter the IP or URL address of the PPTP or L2TP authentication server As a rule the specified settings are enough to configure a protected connection the VPN tunnel If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 63 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Connection name statpptp_internet_2 MN Connect automatically Username Without authorization Password Password confirmation VPN server address Encryption Authentication algorithm MTU Keep Alive LCP interval sec LCP fails Figure 48 Configuring PPTP Static IP WAN connection The expert settings mode The VPN section Parameter Description Connection name A name for connection for easier identification VPN Select the checkbox to enable auto start of the connection upon the Connect automatically
75. e Back button to specify other settings After clicking the Apply button the page for checking the connection availability opens see the Checking Internet Availability section page 79 Page 57 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual PPTP Static IP or L2TP Static IP Connection Click n Connect IP Address Netmask Gateway IP address Primary DNS server Authorization via 802 1x protocol Authorization in the ISP s network via Y 802 1x protocol Authentication method Username Password Use this switch to enter or exit the expert mode Figure 42 Configuring PPTP Static IP WAN connection Fill in the IP Address and Netmask fields In the Gateway IP address field enter the IP address of the gateway used by this WAN connection In the Primary DNS server field enter the address of the primary DNS server If your wired ISP uses authorization via the 802 1x protocol in the Authorization via 802 1x protocol section select the Authorization in the ISP s network via 802 1x protocol checkbox and fill in the fields of the section in accordance with data provided by your ISP As a rule the specified settings are enough to configure a non protected connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the swit
76. e USB WIMAX value to assign this connection to the WiMAX USB modem A name for connection for easier identification Select the checkbox to enable the connection The direction of this connection The maximum size of units transmitted by the interface Page 103 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically IP Address r Netmask Gateway IP address Primary DNS server Secondary DNS server gt Authorization via 802 1x protocol Authorization in the ISP s network via v 802 1x protocol Authentication method EAP MD5 Username gt Password gt Figure 83 The page for creating a new connection The IP and Authorization via 802 1x protocol sections Par
77. e of the DIR 632 device 3 On the opened page enter the username and password for the administrator account in the Login and Password fields correspondingly by default the following username and password are specified admin admin Then click the Enter link Authorization Login admin Password Enter Clear Figure 16 The login page If the error The page cannot be displayed or Unable to display the page Could not connect to remote server occurs upon connecting to the web based interface of the router make sure that you have properly connected the router to your computer Page 30 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual Right after the first access to the web based interface you are forwarded to the page for changing the administrator password specified by default Administrator password System password setting up Password Confirmation Figure 17 The page for changing the default administrator password Enter a new password in the Password and Confirmation fields you may use digits Latin letters uppercase and or lowercase and characters available on the keyboard then click the Save link Remember or write down the new password for the administrator account In case of losing the new password you can access the settings of the router only after restoring the factory defaul
78. e page for selecting a LAN port to connect an IPTV set top box On the opened page select the LAN port of the router to which you will connect your IPTV set top box and click the Change button After that you will get to the quick settings page If in the future you need to disconnect your IPTV set top box from the specified LAN port and connect to it a computer on the current page deselect the LAN port and click the Change button If for accessing the Internet and IPTV services your ISP uses virtual local area networks with identifiers VLAN ID to configure access to the IPTV service proceed to the Advanced VLAN page create a group of ports with the required value of the VLAN ID parameter Transparent type and the port to which the set top box will be connected see the VLAN section page 147 for a detailed description of the elements from the page Page 90 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Status The pages of this section display data on the current state of the router e network statistics e JP addresses leased by the DHCP server e the routing table e data on devices connected to the router s network and its web based interface Network Statistics On the Status Network statistics page you can view statistics for all connections existing in the system WAN connections LAN WLAN For each connectio
79. eckbox is always selected The number of the key from first to fourth which will be used for WEP encryption Encryption Key WEP Select the checkbox to set a hexadecimal number as a key for as HEX encryption Default Key ID Keys for WEP encryption The router uses the key selected from the Default Key ID drop down list It is required to specify all the Encryption Key WEP 1 4 You can specify keys containing 5 or 13 symbols use digits and or Latin characters If the Encryption Key WEP as HEX checkbox is selected you can specify only keys containing 10 symbols the digits 0 9 and the characters A F Page 86 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual When the WPA PSK or WPA2 PSK value is selected the WPA Encryption settings section is displayed Wireless network settings wizard Security settings Network Authentication WPA2 PSK Encryption Key PSK 76543210 WPA2 Pre authentication O _WPA Encryption settings WPA Encryption TKIP WPA reneval Figure 68 The WPA2 PSK value is selected from the Network Authentication drop down list Parameter Description A key for WPA encryption The key can contain digits and or Latin Encryption Key PSK characters WPA2 Pre The checkbox activating preliminary authentication displayed only authentication for the WPA2 PSK au
80. eckbox to allow authorization in the ISP s network via the 802 1x protocol Page 48 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Primary DNS server Secondary DNS server Authorization via 802 1x protocol Authorization in the ISP s network via Y 802 1x protocol Authentication method EAP MD5 Username Password Miscellaneous Enable RIP Enable IGMP Multicast NAT firewall Ping Figure 34 Configuring Static IP WAN connection The expert settings mode The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection i ffic fi th t l Enable IGMP Multicast Select the checkbox to allow multicast traffic from the externa network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from Ping the external network through this connection For security reasons it is recommended not to select this checkbox Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings
81. ed changes will be displayed Click the Save 1 icon A to save the current language of the web based interface as the default language The quick settings page displays general information on the router and its software the version and the date of the firmware the IP address of the device the name of the WLAN etc Page 32 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual On the quick settings page you can run a needed Wizard quickly get to some pages of the web based interface search for a specific page or switch to the advanced settings section To upgrade the firmware of the router left click the current firmware version the right column of the Firmware version line After clicking the line the System Firmware upgrade page opens for the detailed description of the page see the Firmware Upgrade section page 186 To contact the technical support group to send an e mail left click the support e mail address the right column of the Support line After clicking the line the e mail client window for sending a new letter to the specified address opens To edit the router s local interface parameters left click the IP or MAC address of the local interface the right column of the LAN IP line or LAN MAC line correspondingly After clicking the line the page for editing the LAN interface opens for the detailed description of
82. ee ad 35 Statron EST is Sele tee ase e A da al ley aed Se AE Ble eee tase oie Bee ce GLa aA 37 WERSIE E AA A ae a i a A SS A e aa a a ARN ata e LO Using WPS Function via Web based Interface oooooooooooooooooooooo 140 Using WPS Function without Web based InterfaCe o o oooooooooooooooooo 140 Additional Settings ean aa A A A RA o teo DAZ WM Mend TA AA A AS e ee al eee AAA A ee Se ae AV iio ti es Seba Serato ace ioe Ea to eed Bente Sug aioe See oar A A A teas 146 VEAN ua a A o A SE A Lod A Peek lame Oho GUO e rar AS 47 UP BaF aye A EN A O A Dd et tt TS NA ESO DONS eck sate Gil dt A AAA A AA A A A A sett od DNS A A A A Speed A SR A LENA atlas Gade Seid Sake ahs OS ROUTING A E eee eek een eles Sawant sae LOA Remote ACES Sis eras NSLS IAS AE a ead aS TA ADA A Bl de wide aoe ese LOO TEMPS sansa a foie Sve Ri Sites a A A TN Bie tee thd al op Suet oleae ak OF Pai rewal Il peaky aeeie AAA ee oS eh ad dees ae 159 PEE SES o E dd coh suai Dovel s owerte de A o ro O Virtual SSE VIE DS reon es Ba BAe ak Stee eis SNe See we wid hare Stee Bae a 6 ner estes See 62 DMZ E No TE o E DREN eS ia Tere net Teh OPOA Si ideo Me aaa 65 MAC Filter mio a A A belle O E E A AS A A te LO USB Modem ui tute dl eta a DN Ea ae Mie tua Seats ad fe 168 TPE VAMC VOM a A A er enabler wb Sree oe sea e aha cewe ed 68 Bi Nis 8 2 5 5 eden a a ae A A a eh ae ee EE Gre Mel gee doe arg at LOD Page 3 of 197 DIR 632 Multifunction Wireless Router Supportin
83. elect the checkbox if you want to log all data on PPP connection debugging Click n Connect Password confirmation APN Dial number Authentication algorithm mMTU Keep Alive LCP interval sec LCP fails Extra options Dial on demand PPP debug Miscellaneous NAT firewall Figure 59 Configuring 3G WAN connection The expert settings mode The Miscellaneous section Page 77 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Parameter Description Miscellaneous Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons 1t is recommended not to select this checkbox Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 79 Page 78 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web
84. elnet page To disable access via TELNET deselect the On checkbox and click the Change button To enable access via TELNET again select the On checkbox In the Port field enter the number of the router s port through which access will be allowed by default the port 23 is specified Then click the Change button Page 190 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Users On the System Users page you can create user accounts to provide access to data on the USB storage connected to the router Password Read only Figure 153 The System Users page To create a new user account click the Add button Page 191 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Users Edit user Login Password Read only A Save Figure 154 The page for adding a user On the opened page specify a username and password for the account in the relevant fields You can use letters of the Latin and Russian alphabets uppercase and or lowercase and digits You cannot create accounts with the following usernames ftp admin support user nobody To change the password of an account select the relevant line in the table On the opened page enter a new value in the Password field and click
85. ess network Max Associated Clients Wireless network settings wizard Basic settings Hide Access Point SD DIR 632 Country RUSSIAN FEDERATION Channel Sa Wireless mode 802 11 G gt When changing mode from B G on any of the modes with N is recommended to re tune security Max Associated Clients 0 Figure 64 Basic settings of the wireless LAN Click the Next button to continue Page 83 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual On the next page you can modify security settings of the WLAN By default the Open network authentication type with no encryption is specified for the WLAN Wireless network settings wizard Security settings Open Enable Encryption WEP O lt Back Next gt Figure 65 The default security settings The default security settings do not provide sufficient protection for the WLAN Please m specify your own security settings for the WLAN Page 84 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Wireless network settings wizard Security settings Network Authentication lt Back Next gt Figure 66 Network authentication types supported by the router The router supports the following authen
86. events from using the relevant Access Category Acknowledgment Answering response requests while transmitting Displayed only in the Parameters of Access Point section Ack If not selected the router answers requests If selected the router does not answer requests When you have configured the parameters click the Change button Page 145 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Advanced In this menu you can configure advanced settings of the router create groups of ports for VLANs enable the UPnP function configure a DDNS service add name servers define static routes create rules for remote access to the web based interface allow the router to use IGMP Page 146 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual VLAN On the Advanced VLAN page you can create and edit groups of ports for virtual networks VLANS By default 2 groups are created in the router s system e lan it includes ports 1 8 and the wireless interface e wan for the WAN interface it includes port INTERNET The VLAN ID parameter is not specified for both groups Such a setting means that these groups of ports are not assigned to any VLAN Advanced VLAN VLAN setting Creating and editing VLAN
87. from the drop down list A port of the router from which traffic is directed to the IP address Public port begin specified in the Private IP field Specify the start and the end value for the port range If you need to specify one port enter the needed value in the Public port begin field and leave the Public port end field blank Public port end A port of the IP address specified in the Private IP field to which traffic is directed from the Public port Specify the start and the end value for the port range If you need to specify one port enter the needed value in the Private port begin field and leave the Private port end field blank Private port begin Private port end Page 163 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Parameter Description The IP address of the server from the local area network To choose Private IP a device connected to the router s LAN at the moment select the relevant value from the drop down list the field will be filled in automatically Remote IP The IP address of the server from the external network Click the Change button To edit the parameters of an existing server follow the link with the name of the server On the opened page change the needed parameters and click the Change button To remove an existing server follow the link with the n
88. g WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual WIMAX A A eS A da A A a ana 171 TE O VME OT iD RA A AA a A a 71 USB St or iii A A AA a A Hee E Sree ohio Gl fat a 173 DEVO TM eto O11 eth A e O LU O AAA ts aL FDO LOWS CEA A A el tae A A A a A a reg one 74 PLL CIN a 9b OI pS a Ea ed EE Dae era 75 EE Pao Ae iS aata a do Sa a a sacle a a a ea ere aor nese 76 leto oi sh ao P EES E TR O E EAN 177 URG ELIES as a ice a E a a 8 ole E SUES A eleva A 7 77 System aeree a a A RA AA EE E A E a aa 180 Administrator PASS WOTA Li A A A Bee ts wate ee 81 Configuration Lia AS SILA TA AS E AS AS EA A id LBZ System LOG AA E A NN ES ARS aoe LOA Firmware Upgrades seule sai a Bil a a Ae eee AI She SAL e ata ESO INT PoC STs s LE ERAN tak alae BE AN AS a too TEC SEQUE A A A A AA A AA A hg eh Sf 89 Telnet ati a o NAO A AAA ade an Bier tee pias 90 USES tino eE a ts Bhat e err 91 Chapter 5 Operation GuidelineS ooo ooococooocooooo 193 Supported USB M dems sii o A E e A E PS Se ae at 193 Safety Instruct1ons a A a a Ad EONS 194 Wireless Installation ConsiderationS ooooo o oo ooo oo ooo 194 Connecting to Cable or DSL ModeM o oooooooooocooooooo o o o 195 Chapter 6 Abbreviations and ACronyMS o oo ooooooooooo 196 Page 4 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Introduction User Manual CHAPTE
89. g via Web based Interface User Manual Connect automatically 2 Username Without authorization Password TS Password confirmation D ances VPN server address Encryption No encrypt Authentication algorithm AUTO MTU 1456 Keep Alive E Extra options gt Dial on demand Static IP Address PPP debug a Figure 94 The page for creating a new connection The VPN section Parameter Description Select the checkbox to enable auto start of the connection upon the oot up of the router Username A username login to access the Internet Connect automatically b Select the checkbox if you don t need to enter a username and password to access the Internet A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes VPN server address The IP or URL address of the PPTP or L2TP authentication server Without authorization Page 116 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Select a method of MPPE encryption No encrypt MPPE encryption is not applied MPPE 40 128 bit MPPE encryption with a 40 bit or 128 bit key is applied Encryption MPPE 40 bit MPPE encryption with a 40 bit key is applied MPPE 128 bit MPPE encryption with a 128 bit key is app
90. gs are configured click the Save button Page 108 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Creating PPTP or L2TP WAN Connection To create a connection of the PPTP or L2TP type click the Add button on the Net WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Provider Manually v Connection Type PPTP Port poa Name pptp 2 Enable Y Direction WAN Figure 88 The page for creating a new connection The General settings section Parameter Description General settings Leave the Manually value Leave the auto value Name O A name for connection for easier identification Enable Select the checkbox to enable the connection Direction The direction of this connection Page 109 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Connect automatically Y Username Without authorization Password TS Password confirmation O VPN server address Encryption No encrypt Authentication algorithm AUTO MTU 1456 Keep Alive a Extra options gt Dial on demand Static IP Address PPP debug Figure 89
91. he IPTV settings On the opened page click the Back button to specify other settings for configuring the router to use an IPTV set top box Click the Save button to save the specified settings After clicking the Save button the quick settings page opens Page 81 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Wireless Network Settings Wizard To specify all needed settings for your wireless network click the Wireless network settings wizard link in the Wi Fi section Wireless network settings wizard Common settings Enable Wireless Advanced settings Figure 63 Common and advanced settings of the wireless LAN On the opened page in the Common settings section select the Enable Wireless checkbox if 1t was deselected before to enable Wi Fi connections Click the Next button to continue Page 82 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface In the Basic settings section you can change the basic parameters of your router s WLAN hide your wireless network Hide Access Point specify a name for the network SSID select your location Country and the wireless channel number Channel specify the operating mode Wireless Mode and the maximum number of devices connected to the wirel
92. hen the connection has been inactive for a Keep Alive specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Advanced options of the pppd daemon which need to be specified Extra options i y for this connection Optional Select the checkbox if you want the router to establish the connection on demand In the Maximum idle time field specify a Dial on demand Be Manca ape period of inactivity in seconds after which the connection should be terminated Fill in the field if tt tatic IP for thi Static IP Address ill in e field if you want to use a static address for this connection PPP debug Select the checkbox if you want to log all data on PPP connection debugging The assigned IP address Page 111 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Miscellaneous Enable RIP al NAT Y Y firewall Ping Figure 90 The page for creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it
93. ick search aaa F P Status ES Wi Fi Network statistics y Y Common settings DHCP N Basic settings Routing table Security settings Advanced Firewall y USB modem IP filters x Information Virtual servers gt PIN DMZ URL filter USB storage a Control YN information G Information Filebrowser Print server System Administrator password Configuration System loq Quick settings FRdvanced setings Search Figure 20 The advanced settings page The pages of the Status section display data on the current state of the router for the description of the pages see the Status section page 91 The pages of the Net section are designed for configuring basic parameters of the LAN interface of the router and creating a connection to the Internet for the description of the pages see the Net section page 95 The pages of the Wi Fi section are designed for specifying all needed settings of the router s wireless network for the description of the pages see the Wi Fi section page 128 Also you can enable or disable the device s WLAN directly from the advanced settings page To enable the WLAN select the On position GEE of the Enable Disable Wi Fi switch To disable the WLAN select the Off position i of the Enable Disable Wi Fi switch The pages of the Advanced section are designed for configuring additional parameters of the router for the description of the pages see the Advanced section page 146 The page
94. ings mode The IP and Authorization via 802 1x protocol sections Parameter Description Obtain DNS server Select the checkbox to configure automatic assignment of DNS addresses server addresses If the checkbox is selected the Primary DNS automatically server and Secondary DNS server fields are not displayed Primary DNS server Enter addresses of the primary and secondary DNS servers in the Secondary DNS server relevant fields Vendor ID The identifier of your ISP Optional Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Password Enter the password provided by your ISP Select the checkbox to allow authorization in the ISP s network via the 802 1x protocol Page 52 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Secondary DNS server Vendor ID Authorization via 802 1x protocol Authorization in the ISP s network via Y 802 1x protocol Authentication method EAP MD5 Username Password Miscellaneous Enable RIP Enable IGMP Multicast Y NAT Ed firewall Y Ping E Expert L EA lt Back Next gt Figure 38 Configuring Dynamic IP WAN connection The expert se
95. is over the System caption 7 The name of the button depends upon the web browser that you use Page 183 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual System Log On the System System log page you can set the system log options and configure sending the system log to a remote host Logging Logging type Local and remote Mi Logging level Informational messages Server Port Change Figure 147 The System System log page The Configuration tab To enable logging of the system events select the Logging checkbox on the Configuration tab Then specify the needed parameters Control Description Select a type of logging from the drop down list e Local the system log is stored in the router s memory and displayed on the Log tab When this value is selected the Server and Port fields are not displayed Logging type Remote the system log is sent to the remote host specified in the Server field Local and remote the system log is stored in the router s memory and displayed on the Log tab and sent to the remote host specified in the Server field Logging level Select a type of messages and alerts notifications to be logged The IP or URL address of the host from the local or global network to which the system log will be sent Server Page 184 of 197 DIR 632 Multifuncti
96. ith Built in 8 port Switch Operation Guidelines User Manual Safety Instructions Place your router on a flat horizontal surface or mount the router on the wall the mounting holes are located on the bottom panel of the device Make sure that the router is provided with sufficient ventilation To prevent overheating do not obstruct the ventilation openings of the router Plug the router into a surge protector to reduce the risk of damage from power surges and lightning strikes Operate the router only from an electrical outlet with the correct power source as indicated on the adapter Do not open the cover of the router Otherwise any warranty will be invalidated Unplug the equipment before dusting and cleaning Use a damp cloth to clean the equipment Do not use liquid aerosol cleaners or magnetic static cleaning devices Wireless Installation Considerations The DIR 632 device lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network Keep in mind however that the number thickness and location of walls ceilings or other objects that the wireless signals must pass through may limit the range Typical ranges vary depending on the types of materials and background RF noise in your home or office To maximize your wireless range follow the guidelines below l Keep the number of walls and ceilings between the DIR 632 device and other network devices
97. k mask An IP address through which the destination network can be accessed Gateway The field is displayed when the lt Auto gt value is selected from the Via Interface drop down list A metric for the route The lower the value the higher is the route priority Optional Select an interface through which the destination network can be accessed from the drop down list If you have selected the lt Auto gt value of this drop down list the router itself sets the interface on the basis of data on connected networks Via Interface Click the Save button To edit an existing route click the relevant route link On the opened page change the needed parameters and click the Save button To remove an existing route click the relevant route link On the opened page click the Delete button Page 155 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Remote Access On the Advanced Remote access page you can configure access to the web based interface of the router By default the access from external networks to the router is closed If you need to allow access to the router from the external network create relevant rules IP address Mask Public port 192 168 161 0 255 255 255 0 8080 Figure 124 The Advanced Remote access page To create a new rule click the Add button Page 156 of 197 DIR 632 Multifu
98. lied MPPE encryption can be applied only if the MS CHAP MS CHAP V2 or AUTO value is selected from the Authentication algorithm drop down list Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value MTU The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Advanced options of the pppd daemon which need to be specified Extra options for this connection Optional Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated Static IP Address Fill in the field if you want to use a static IP address to access the Internet PPP debug Select the checkbox if you want to log all data on PPP connection debugging The IP address assigned by the ISP Keep Alive Dial on demand Page 117 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Miscellaneous Enable RIP al NAT Y Y firewall Ping Figure 95 The page fo
99. ll computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 79 Page 45 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Static IP Connection Click n Connect Connection name static_internet_2 IP Address Netmask Gateway IP address Primary DNS server Authorization via 802 1x protocol Authorization in the ISP s network via Y 802 1x protocol Authentication method Username Password Figure 31 Configuring Static IP WAN connection In the Connection name field specify a name for the connection for easier identification Fill in the IP Address and Netmask fields In the Gateway IP address field enter the IP address of the gateway used by this WAN connection In the Primary DNS server field enter the address of the primary DNS server If
100. lways enabled this setting can substantially lower the efficiency of your wireless network Always Off The protection function is always disabled This parameter defines the length of the CRC block sent by the router when communicating to wireless devices Select a value from the drop down list TX Preamble Long Preamble Short Preamble this value is recommended for networks with high volume traffic When you have configured the parameters click the Change button Page 143 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual WMM On the Wi Fi WMM page you can enable the Wi Fi Multimedia function The WMM function implements the QoS features for Wi Fi networks It helps to improve the quality of data transfer over Wi Fi networks by prioritizing different types of traffic To enable the function select the WMM checkbox and click the Change button WMM WMM Y Parameters of Access Point AC Aifsn CWMin CWMax Txop ACM Ack AC_BK 7 1 iz 1023 0 T E AC_BE 3 15 63 y 0 AC_VI r1 Ty 15 y 94 La Lal AC_VO 1 3 Ty 47 T o AC Aifsn CWMin CWMax Txop ACM AC_BK 7 15 y 1023 o AC_BE 3 15 y 1023 0 a AC_VI 2 Ty 15 gt 94 E AC_VO 2 315 Tz 47 O Change Figure 115 The page for configuring the WMM function All needed settings for the WMM function are specified in the device s system It is m
101. meter Description mst The code stored in the SIM card inserted to your USB modem OO ME The code stored in the memory of the USB modem The signal level at the input of the modem s receiver The zero Signal level signal level shows that you are out of the coverage area of the selected operator s network When the needed network is available the name of the operator is Operator name f a displayed in this field A type of the network to which the USB modem is connected 2G or 3G Mode PIN On the USB modem PIN page you can change the PIN code of the identification card inserted into your USB modem disable or enable the check of the PIN code I The operations presented on this page are not available for CDMA USB modems USB modem PIN code management Attempts left PIN code Disable PIN check New PIN code New PIN code confirmation Figure 135 The USB modem PIN page To disable the PIN code check select the Disable PIN check checkbox enter the current PIN code in the PIN code field and click the Enter button Page 169 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface To enable the PIN code check deselect the Disable PIN check checkbox enter the PIN code used before disabling the check in the PIN code field and click the Enter button To change the PIN code enable the PIN code
102. n In the Username field enter your login and in the Password and Password confirmation fields the password to connect to a remote server In the VPN server address field enter the IP or URL address of the PPTP or L2TP authentication server As a rule the specified settings are enough to configure a protected connection the VPN tunnel If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 54 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Connection name VPN Connect automatically Username Without authorization Password Password confirmation VPN server address Encryption Authentication algorithm mMTU Keep Alive LCP interval sec LCP fails A m lt Back Next gt Figure 40 Configuring PPTP WAN connection The expert settings mode The VPN section Parameter Description Connection name A name for connection for easier identification VPN Select the checkbox to enable auto start of the connection upon the Connect automatically host afila router Username A username login to access the server Select the checkbox if you don t need to enter a username and password to access the server A password to access the server Password confirmation The confirmatio
103. n of the entered password to avoid mistypes VPN server address The IP or URL address of the PPTP or L2TP authentication server Without authorization Page 55 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Select a method of MPPE encryption No encrypt MPPE encryption is not applied MPPE 40 128 bit MPPE encryption with a 40 bit or 128 bit key is applied Encryption MPPE 40 bit MPPE encryption with a 40 bit key is applied MPPE 128 bit MPPE encryption with a 128 bit key is applied MPPE encryption can be applied only if the MS CHAP MS CHAP V2 or AUTO value is selected from the Authentication algorithm drop down list Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to the server even when the connection has been inactive for a Keep Alive specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Advanced options of the pppd daemon which need to be specified Extra options a i for this connection Optional Select the checkbox if you want the router to establish the Dial omdemand connection on demand In the Maximum idle
104. n the following data are displayed name and state when the connection is on its name is highlighted in green when the connection is off its name is highlighted in red IP address and subnet mask gateway if the connection is established MAC address MTU value and volume of data received and transmitted with increase of the volume the units of measurement are changed automatically byte Kbyte Mbyte Gbyte Network statistics Name IP Gateway MAC MTU Rx Tx WIFI E 2 i 20 10 B1 25 00 40 3290 863 byte 2 23 Kbyte wan 192 168 161 228 24 o aci 3A 64 39 3A 39 38 E 1500 1 43 Mbyte 5 61 Mbyte LAN 192 168 0 1 24 E 20 10 B1 25 00 40 1500 249 Kbyte 2 82 Mbyte Figure 71 The Status Network statistics page Page 91 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual DHCP The Status DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device as IP address MAC address Expires microsof 2500d3 192 168 0 91 00 24 01 32 12 f7 1day 35min 59sec Figure 72 The Status DHCP page Page 92 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Routing Table The Status Routing table page di
105. nction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Advanced Remote access Remote access rule editing IP address gt v Mask Protocol HTTP Public port Change Figure 125 The page for adding a rule for remote management You can specify the following parameters Parameter Description A host or a subnet to which the rule is applied To choose a device connected to the router s LAN at the moment select the relevant IP address l value from the drop down list the field will be filled in automatically Mask The mask of the subnet The protocol available for remote management of the router Public port An external port of the router You can specify only one port Click the Change button To edit a rule for remote access click the relevant link On the opened page change the needed parameters and click the Change button To remove a rule for remote access click the relevant link On the opened page click the Delete button Page 157 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual IGMP On the Advanced IGMP page you can enable IGMP for the router IGMP is used for managing multicast traffic transferring data to a group of destinations This protocol allows using network resources f
106. new connection will be assigned Select the USB WIMAX value to assign this connection to the WiMAX USB modem A name for connection for easier identification Select the checkbox to enable the connection The direction of this connection The maximum size of units transmitted by the interface Page 119 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Obtain DNS server addresses E automatically Primary DNS server Secondary DNS server Vendor ID Description A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Authorization via 802 1x protocol Authorization in the ISP s network via Y 802 1x protocol Authentication method Username Password Figure 97 The page for creating a new connection The IP and Authorization via 802
107. nfiguration page Click the Factory line to restore the factory default settings Also you can restore the factory defaults via the Factory button on the System Configuration page Also you can restore the factory default settings via the hardware RESET button The button is located on the back panel of the router next to the power connector Page 36 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual To restore the factory default settings insert a small paperclip into the hole of the button with the router powered on push and hold for 10 seconds Then remove the paperclip All LEDs of the router should turn off and then turn on again Wait for about 30 seconds Now you can access the web based interface of the router using the default IP address username and password If you fail to restore the factory defaults via the method described above use the emergency reset method 1 Power off the device 2 Insert a small paperclip into the hole ofthe RESET button and push 3 Power on the device keeping the button pushed 4 After 5 seconds release the button When you keep the button pushed for more than 8 seconds the router switches to crash recovery mode To restore normal operation of the router please contact the Technical Support Service When you have configured all needed settings click the Logout line Page 37 of 1
108. ng used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Page 47 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual IP Address Netmask Gateway IP address Primary DNS server Secondary DNS server Authorization in the ISP s network via Y 802 1x protocol Authentication method EAP MD5 Username Password Miscellaneous Figure 33 Configuring Static IP WAN connection The expert settings mode The IP and Authorization via 802 1x protocol sections Parameter Description IP Address Enter an IP address for this WAN connection Netmask Enter a subnet mask for this WAN connection Gateway IP address Enter an IP address of the gateway used by this WAN connection Primary DNS server Enter addresses of the primary and secondary DNS servers in the Secondary DNS server relevant fields Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Enter the password provided by your ISP Select the ch
109. ng via Web based Interface User Manual Security Settings On the Wi Fi Security settings page you can modify security settings of the WLAN Security settings Network Authentication Open Enable Encryption WEP O Change Figure 106 The default security settings By default the Open network authentication type with no encryption is specified for the WLAN The default security settings do not provide sufficient protection for the WLAN Please m specify your own security settings for the WLAN Page 131 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Network Authentication Change Figure 107 Network authentication types supported by the router The router supports the following authentication types Authentication type Description Open authentication with WEP encryption for wireless network modes not supporting 802 11n devices WPA based authentication using a PSK WPA2 based authentication using a PSK Shared key authentication with WEP encryption This authentication type is not available when on the Wi Fi Basic settings page in the Wireless mode drop down list a mode supporting 802 11n devices is selected Page 132 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual
110. nnect or change a USB modem to another one when the router is powered on power off the router connect the modem to the USB port and power on the router Connect the power cord to the power connector port on the back panel of the router then plug the power adapter into an electrical outlet or power strip Turn on your PC and wait until your operating system is completely loaded Obtaining IP Address Automatically in OS Windows XP l 2 Click the Start button and proceed to the Control Panel gt Network and Internet Connections gt Network Connections window In the Network Connections window right click the relevant Local Area Connection icon and select the Properties line in the menu displayed Network Connections File Edit View Favorites Tools Advanced Help Back 4 Search Folders y gt 2 EA Address Network Connections Name Type Status hele LAN or High Speed Internet Other Places Local Area Connection Disable or High Speed Inter Enabled e Control Panel Hanis Repair My Network Places E My Documents Bridge Connections Create Shortcut Rename Figure 3 The Network Connections window Details 4 It is recommended to use a USB extension cable to connect a USB modem to the router Page 18 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual In the Local Area Conne
111. nterface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified Keep live period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a Dial on demand de yi a period of inactivity in seconds after which the connection should be terminated This option is used by some ISPs Contact your ISP to clarify if this checkbox needs to be enabled PPP IP extension Fill in the field if you want to use a static IP address to access the Internet Select the checkbox if you want to log all data on PPP connection PPP debug ee Select the checkbox if you want to allow PPPoE clients of PPPoE pass through computers from your LAN to connect to the Internet through this PPPoE connection of the router Static IP Address Page 101 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Miscellaneous Enable RIP Enable IGMP Multicast NAT Fj v firewall Ping Figure 81 The page for creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this
112. ntifier for the WiMAX network Specify the parameter if your WiMAX ISP requires this Diode on modem Select the checkbox to enable the modem s LED indicator The state of connection to the WiMAX network Red light The connection is not established Link status Yellow light The USB modem is connecting to the network Green light The connection is established MAC address The MAC address of the WiMAX USB modem Page 171 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Parameter Description The signal level at the input of the modem s receiver CINR The relation of the signal level to the noise level This parameter is used to measure the quality of the signal Base station ID The identifier of the base station Transmit power The signal level at the output of the modem s receiver Frequency The frequency of the signal transmitted by the modem s receiver Click the button to connect to the WiMAX network Beforehand Connect you need to create a WAN connection with relevant parameters The button is displayed when the connection is not established Click the button to disconnect from the WiMAX network The button is displayed when the connection is established or is being established To save the values of the SSID and Diode on modem field click the Connect button Page 172 of 197 DIR 632 Multif
113. nual Back Panel Figure 2 Back panel view Port Description LAN 1 8 8 Ethernet ports to connect computers or network devices A port to connect to a cable or DSL modem or to a private Ethernet INTERNET line it is recommended to use the cable included in the delivery package USB A port for connecting a USB modem a USB storage or a printer A button to restore the factory default settings RESET To restore the factory defaults push the button with the device turned on hold it for 10 seconds and then release the button The router is also equipped with two detachable antennas with RP SMA connector Page 14 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Overview User Manual Delivery Package The following should be included Wireless router DIR 632 Power adapter DC 5V 2 5A Ethernet cable CAT 5E Two detachable antennas Quick Installation Guide brochure The User Manual and Quick Installation Guide documents in Russian and English are available on D Link website see ftp dlink ru pub Router DIR 632 Description Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product Page 15 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual CHAPTER 3 IN
114. of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Connection name pppoe_internet_2 Ethernet MTU MAC RERA Username Without authorization Password Password confirmation Service name Authentication algorithm MTU Keep Alive expert O lt Back Figure 28 Configuring PPPoE WAN connection The expert settings mode The Ethernet section Parameter Description Connection name A name for connection for easier identification The maximum size of units transmitted by the interface A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Page 42 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Use
115. ol ntp org Change Figure 150 The System NTP client page To enable automatic synchronization with a time server 1 Select the Enabled checkbox 2 Select your time zone Specify the needed NTP server in the NTP servers field or leave the server specified by default 4 Click the Change button When the router is powered off or rebooted the system time is reset to the default value I If you have set automatic synchronization for the system time the internal clock of the device will be configured after connecting to the Internet Page 188 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Traceroute On the System Traceroute page you can define the route of data transfer to a host via the traceroute utility System Traceroute Figure 151 The System Traceroute page To define the route enter the name or IP address of a host in the Host field and click the Start button After a while the results will be displayed on the page Page 189 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Telnet On the System Telnet page you can enable or disable access to the device settings via TELNET from your LAN By default access is enabled Telnet Change Figure 152 The System T
116. on Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Control Description A port of the host specified in the Server field By default the value nor 514 is specified After specifying the needed parameters click the Change button To disable logging of the system events deselect the Logging checkbox and click the Change button On the Log tab the events specified in the Logging level list are displayed System System log Configuration Log 0 Refresh Export Figure 148 The System System log page The Log tab To view the latest system events click the Refresh button To save the system log to your PC click the Export button and follow the dialog box appeared Page 185 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Firmware Upgrade On the System Firmware upgrade page you can upgrade the firmware of the router Upgrade the firmware only when the router is connected to your PC via a wired_ a connection Firmware upgrade Select update file Update Figure 149 The System Firmware upgrade page The current version of the router s firmware is displayed in the Firmware version field located next the D Link logo in the top left corner of the page If you need to install a newer ve
117. or some applications e g for streaming video more efficiently Advanced IGMP Enabled V Version 2 gt Change Figure 126 The Advanced IGMP page To enable IGMP select the Enabled checkbox From the Version drop down list select a version of IGMP Then click the Change button Such a setting allows using the IGMP Proxy function for all WAN connections for which the Enable IGMP Multicast checkbox is selected To disable IGMP deselect the Enabled checkbox and click the Change button Page 158 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Firewall In this menu you can configure the firewall of the router e add rules for IP filtering e create virtual servers e define a DMZ e configure the MAC filter IP Filters On the Firewall IP filters page you can create new rules for filtering IP packets and edit or remove existing rules Firewall IP filters _IP filters configuration _ IP address Name Protocol Source Destination Source Destination Figure 127 The Firewall IP filters page To create a new rule click the Add button Page 159 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Firewall IP filters IP filter rule editing Name Protocol TCP U
118. pporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Obtain DNS server addresses E automatically Primary DNS server Secondary DNS server Vendor ID Description A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement You can click the Clone MAC Address button E to set the MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Authorization via 802 1x protocol Authorization in the ISP s network via Y 802 1x protocol Authentication method Username Password Figure 86 The page for creating a new connection The IP and Authorization via 802 1x protocol sections Parameter Description Obtain DNS server addresses automatically Primary DNS server Secondary DNS server Select the checkbox to configure automatic assignment of DNS server addresses If the checkbox is selected the Primary DNS server and Secondary DNS server fields are not displayed Enter addresses of the primary and seconda
119. r Configuration URL addresses URL addresses list You can add edit and delete addresses here URL address Add Figure 143 The Control URL filter page The URL addresses tab On the opened page specify the needed parameters Control URL filter Configuration URL addresses URL address editing URL address Save Figure 144 The page for adding an address for the URL filter Enter a URL address in the URL address field and click the Save button Page 178 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual To remove an address from the list of URL addresses select the relevant address in the table on the URL addresses tab and click the Delete button To disable the URL filter deselect the Enable Disable URL filter checkbox on the Configuration tab then click the Change button Page 179 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual System In this menu you can do the following change the password used to access the router s settings save the current settings to the non volatile memory create a backup of the router s configuration restore the router s configuration from a previously saved file restore the factory default settings view the system log update the firmware of the route
120. r configure automatic synchronization of the system time trace the route to a host allow or forbid access to the router via TELNET create accounts for users to allow access to the content of the USB storage Page 180 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Administrator Password On the System Administrator password page you can change the password for the administrator account used to access the web based interface of the router and to access the device settings via TELNET For security reasons it is strongly recommended to change the administrator password upon initial configuration of the router Administrator password System password setting up The system password and the password for the web based interface will be changed at the same time Login admin Password Confirmation Figure 145 The page for modifying the administrator password Enter the new password in the Password and Confirmation fields and click the Save button Page 181 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface Configuration On the System Configuration page you can save the changed settings to the non volatile memory restore the factory defaults backup the current configuration or restore the
121. r creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Select the checkbox to enable protection against ARP and DDoS attacks When all needed settings are configured click the Save button Page 118 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Creating PPTP Dynamic IP or L2TP Dynamic IP WAN Connection To create a connection of the PPTP Dynamic IP or L2TP Dynamic IP type click the Add button on the Net WAN page On the opened page select the relevant value from the Connection Type drop down list and specify the needed values General settings Provider Manually v Connection Type PPTP Dynamic IP Port internet Name dynpptp_internet_2 Enable Y Direction WAN Ethernet MTU 1500 MAC gt vo 2 Figure 96 The page for creating a new connection The General settings and Ethernet sections Parameter Description General settings Provider Leave the Manually value A physical or virtual interface to which the
122. re a protected connection the VPN tunnel If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 71 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Connection name dynpptp_internet_2 VPN Connect automatically Username Without authorization Password Password confirmation VPN server address Encryption No encrypt Authentication algorithm AUTO MTU 1456 Keep Alive 7 LCP interval sec 30 LCP fails 3 Figure 55 Configuring PPTP Dynamic IP WAN connection The expert settings mode The VPN section Parameter Description Connection name A name for connection for easier identification Select the checkbox to enable auto start of the connection upon the boot up of the router Username A username login to access the Internet Connect automatically Select the checkbox if you don t need to enter a username and password to access the Internet Without authorization A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes VPN server address The IP or URL address of the PPTP or L2TP authentication server Page 72 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GS
123. red values Advanced options of the pppd daemon which need to be specified Extra options i for this connection Optional Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated Static IP Address Fill in the field if you want to use a static IP address to access the Internet PPP debug Select the checkbox if you want to log all data on PPP connection debugging The IP address assigned by the ISP Keep Alive Dial on demand Page 65 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Authentication algorithm MTU Keep Alive LCP interval sec LCP fails Extra options Dial on demand Static IP Address PPP debug IP received Miscellaneous Additional settings of VPN tunnel Enable RIP NAT firewall Ping Figure 49 Configuring PPTP Static IP WAN connection The expert settings mode The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to allow the router to answer ping requests from the external network
124. rname Without authorization Password Password confirmation Service name Authentication algorithm MTU Keep Alive Dial on demand PPP IP extension Static IP Address PPP debug PPPoE pass through Figure 29 Configuring PPPoE WAN connection The expert settings mode The PPP section Parameter Description Username A username login to access the Internet Select the checkbox if you don t need to enter a username and password to access the Internet A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes The name of the PPPoE authentication server Authentication Select a required authentication method from the drop down list or algorithm leave the AUTO value The maximum size of units transmitted by the interface Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Without authorization Keep Alive Page 43 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Dial on demand PPP IP extension Static IP Address PPP debug PPPoE pass through Description Select the checkbo
125. rotocol Miscellaneous Figure 36 Configuring Dynamic IP WAN connection The expert settings mode The Ethernet section Parameter Description Connection name A name for connection for easier identification The maximum size of units transmitted by the interface A MAC address assigned to the interface This parameter is mandatory if your ISP uses MAC address binding In the field enter the MAC address registered by your ISP upon concluding the agreement gt You can click the Clone MAC Address button to set the MAC MAC address of the network interface card of the computer that is being used to configure the router at the moment as the MAC address of the WAN interface Also you can set the address of a device connected to the router s LAN at the moment To do this select the relevant value from the drop down list the field will be filled in automatically Page 51 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect P Obtain DNS server addresses E automatically Primary DNS server Secondary DNS server Vendor ID Authorization via 802 1x protoco Authorization in the ISP s network via Y 802 1x protocol Authentication method Username Password Miscellaneous Enable RIP expert UD Figure 37 Configuring Dynamic IP WAN connection The expert sett
126. rsion of the firmware follow the next steps Attention Do not turn off the router before the firmware upgrade is completed This may a cause the device breakdown 1 Download a new version of the firmware from www dlink ru 2 Click the Choose Browse button on the System Firmware upgrade page to locate the new firmware file 3 Click the Update button to upgrade the firmware of the router 4 Wait until the router is rebooted about one and a half or two minutes 5 Log into the web based interface using the login admin and the current password 8 The name of the button depends upon the web browser that you use Page 186 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Configuring via Web based Interface 6 Select the Factory line in the top page menu displayed when the mouse pointer is over the System caption 7 Wait until the router is rebooted Log into the web based interface using the default IP address login and password 192 168 0 1 admin admin Page 187 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual NTP Client On the System NTP client page you can configure automatic synchronization of the system time with a time server on the Internet NTP client Enabled E zone GMT 3 h Baghdad Khartoum gt po
127. ry DNS servers in the relevant fields Page 107 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Vendor ID The identifier of your ISP Optional Authorization via 802 1x protocol Authorization in the ISP s network via 802 1x protocol Authentication method Select a needed authentication method from the drop down list Username Enter the username provided by your ISP Enter the password provided by your ISP Miscellaneous Select the checkbox to allow authorization in the ISP s network via the 802 1x protocol Enable RIP al Enable IGMP Multicast Y NAT Y firewall Y Ping al Figure 87 The page for creating a new connection The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multicast network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox When all needed settin
128. s Name Type Ports VLAN ID Enable port1 U port2 U port3 U port4 U lan Local port5 U Yes wifi1 U port U port U port8 U wan NAT internet U Yes Add Figure 116 The Advanced VLAN page To create a new group for VLAN click the Add button If you want to create a group including LAN ports or the wireless network of the router first delete relevant records from the lan group on this page Page 147 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Advanced Main settings Name Enable Y Type NAT Mi A group of this type may consist of one tagged port or several untagged ports VLAN ID Ports Port list editing To add a new port select a free port from the drop down list If a portis not available in the list it cannot be added as itis associated to another VLAN or it does not correspond to the rules of the VLAN edited at the moment Port internet Mi Qos 0 tagged Mi Figure 117 The page for editing a group of ports for VLAN You can specify the following parameters Parameter Description Main settings Name A name for the port for easier identification Enable Select the checkbox to allow using this group of ports The type of the VLAN which identifier is specified in the VLAN ID field Local The group of this type is a channel
129. s of the Firewall section are designed for configuring the firewall of the router for the description of the pages see the Firewall section page 159 The pages of the USB modem section are designed to operate the connected 3G USB modem for the description of the pages see the USB Modem section page 168 The WiMAX section provides data on the connected WiMAX USB modem for the description of the page see the WiMAX section page 171 The pages of the USB storage section are designed to operate the connected USB storage for the description of the pages see the USB Storage section page 173 Page 34 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual The pages of the Control section are designed for creating restrictions on access to the Internet for the description of the page see the Control section page 177 The pages of the System section provide functions for managing the internal system of the router for the description of the pages see the System section page 180 Also you can find a specific page via search To do this enter the name of the page wholly or partly in the search bar in the top part of the web based interface page and then select a needed link in the search results Virtual servers Firewall Quick settings Advanced settings Search Figure 21 The page displaying the search results Page 35
130. sei kis er sri niee nene 8 ew a a ee le Se ee 88 IPTV Settings WI Zar sy iii ic ri A a Be ern aaa 90 Page 2 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Stata a tes A O LB th de A de tena Ep A 91 Network DES CS Ga OS AS A EOS A A Sie eles tn 91 DEV Ba seo noa E A AR SAA AS EE AS RA A eRe hang 92 Routing Table tala a O A a atte a IS a E o a 93 LAN CVS GS A A A A A o A int tte AR A 94 NES A ete eres ae ned Gan a ends e ot Ronee a E Ea a it a adi s 95 WAN A AN O AN A O E foie eigen os a A Sines 95 CrEACING 3G WAN CONNECELON a a di id A in 96 Creating PPPOE WAN CONNECET OMS as ds a a da data ia a a Be ee ae 99 Creating Static IB WAN CONNECELOMN sc sos ic e a 103 Creating Dyhamtiec LP WAN Connect LON e A AA A eee aes 106 Creating PRIPO DZTP WAN COnneCELOGN 2 putos a Sue a ee ee da eee 109 Creating PPIP Static IP or L2TP Static IP WAN Connection 113 Creating PPTP Dynamic IP or L2TP Dynamic IP WAN Connection 119 MA E E ea Ne es alia E RN OE RN AR O O TN OTE RO 25 WiFi caseron Sees eee Sete A A Se eo te A A 128 COMMON SSCL GS as dicot ete ete Say a hia ep goalies Sire re oe By eee nep gd LAG Baste Settings statis steele a SURE can Sol sore A Seek tt ater ev LOO SECURTEY SGERING Sv wee wl MSS we oie A eee A bie A A wal wis a te aL 3d MAC FA ISCO sc is A core E aed dei Bh SSD He A aaa BE Lares ses bese Shaver
131. settings Beacon Period 100 RTS Threshold Frag Threshold DTIM Period P1 TX Power 100 BG Protection Auto TX Preamble Long Preamble gt Change Figure 114 Additional settings of the WLAN The following fields are available on the page Parameter Description The time interval in milliseconds between packets sent to Beacon Period E synchronize the wireless network RTS Threshold The minimum size in bites of a packet for which an RTS frame is transmitted The maximum size in bites of a non fragmented packet Larger packets are fragmented divided Frag Threshold The time period in seconds between sending a DTIM a message DTIM Period notifying on broadcast or multicast transmission and data transmission The transmit power in percentage terms of the router Page 142 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description The 802 11b and 802 11g protection function is used to minimize collisions between devices of your wireless network Select a value from the drop down list Auto The protection function is enabled and disabled automatically depending on the state of the network this value is recommended i your wireless local area network consists of both 802 11b and 802 11g devices BG Protection Always On The protection function is a
132. settings of the local interface Parameter Description The IP address of the router in the local subnet By default the IP Address following value is specified 192 168 0 1 The mask of the local subnet By default the following value is specified 255 255 255 0 When needed settings are configured click the Save button In the DHCP server section you can configure the built in DHCP server of the router DHCP server Mode Enable DNS Relay T Start IP 192 168 0 2 End IP 192 168 0 100 Lease time min 86400 Figure 102 The section for configuring the DHCP server Page 125 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description An operating mode of the router s DHCP server Enable the router assigns IP addresses to clients automatically in accordance with the specified parameters When this value is selected the DNS Relay Start IP End IP and the Lease time fields are displayed on the page Disable the router s DHCP server is disabled clients IP addresses are assigned manually Relay an external DHCP server is used to assign IP addresses to clients When this value is selected the External DHCP server IP field is displayed on the page Select the checkbox so that the devices connected to the router obtain the address transmitted by the ISP or specified on the DNS Relay A
133. splays the information on routes The table contains destination IP addresses gateways subnet masks and other data Status Routing table Interface Destination Gateway Mask Metric WAN 192 168 161 0 0 0 0 0 255 255 255 0 0 255 255 255 0 0 bro 192 168 0 0 0 0 0 0 192 168 161 1 0 0 0 0 100 WAN 0 0 0 0 Figure 73 The Status Routing table page Page 93 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual LAN Clients On the Status LAN clients page you can view the list of devices connected to the router and devices accessing its web based interface IP address MAC address PEETA 192 168 0 100 08 00 27 2D 0E A4 bro Figure 74 The Status LAN clients page For each device the following data are displayed the IP address the MAC address and the interface to which the device is connected Page 94 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Net In this menu you can configure basic parameters of the router s local area network and configure connection to the Internet a WAN connection WAN On the Net WAN page you can create and edit connections used by the router By default the WAN connection is configured in the system It is assigned to the INTERNET port of the router
134. sword Miscellaneous Enable RIP Enable IGMP Multicast NAT firewall section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multicast j network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons 1t is recommended not to select this checkbox Click the Next button to continue Page 61 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual If needed enter the IP addresses of the ISP s local resources Click n Connect IP address 1 IP address 2 IP address 3 IP address 4 IP address 5 IP address 6 IP address 7 IP address 8 IP address 9 IP address 10 lt Back Figure 46 Configuring PPTP Static IP WAN connection Click the Next button to continue Page 62 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Connection nam
135. t settings via the hardware RESET button This procedure wipes out all settings that you have configured for your router Page 31 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Installation and Connection Web based Interface Structure After successful registration the router s quick settings page opens Y Net Click n Connect Wi Fi Wireless network settings wizard Firewall Virtual server settings wizard Pty Model Firmware version Build time Vendor Support Summary Web revision LAN IP WAN connection status LAN MAC SSID DIR 632 1 4 0 Tue Aug 21 12 51 15 MSK 2012 D Link Russia support dlink ru Root filesystem image for DIR 632 c950db8a99ec637id16c2e345a1 7d61 74bd526ed 192 168 0 1 Connected 192 168 161 237 WAN type dynamic 5c d9 98 63 15 12 DIR 632 5 IPTV settings wizard MOM Advanced settings Search Figure 18 The quick settings page The web based interface of the router is multilingual Select a needed language from the menu displayed when the mouse pointer is over the Language caption You can change the language of the web based interface in any menu item Q System z Language v afs English Pycckuin kpaiHCbKka T rk e Fran ais de il wl Figure 19 Changing the language of the web based interface After selecting the language the notification on unsav
136. t to log all data on PPP connection debugging The IP address assigned by the ISP Keep Alive Dial on demand Page 73 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Keep Alive LCP interval sec LCP fails Extra options Dial on demand Static IP Address PPP debug IP received Additional settings of VPN tunnel Enable RIP Enable IGMP Multicast NAT firewall a a a El Ping expert GD Figure 56 Configuring PPTP Dynamic IP WAN connection The expert settings mode The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons 1t is recommended not to select this checkbox Select the checkbox to enable protection against ARP and DDoS attacks Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 79 P
137. t your computer s settings Indexing Options Location and Other Y Sensors Notification Area Icons Personalization Programs and Features RemoteApp and Desktop Connections Sync Center Troubleshooting Windows Defender line 0O gt Control Panel All Control Panel Items gt a Internet Options P Mouse 2 Parental Controls Z Phone and Modem 1 Recovery Sound Re System 2 User Accounts Pg Windows Firewall Search Control Panel View by Largeicons Y Keyboard ER Network and Sharing lt lt Center ho Performance Information and Tools Y Power Options 9 Region and Language Go Speech Recognition Taskbar and Start Menu sE Windows CardSpace Ey Windows Update Figure 12 The Control Panel window In the menu located on the left part of the window select the Change adapter settings In the opened window select the icon of the wireless network connection and make sure that your Wi Fi adapter is on To open the list of available wireless networks select the icon of the wireless network connection and click the Connect To button or left click the network icon in the notification area located on the right side of the taskbar 16 14 13 10 2011 Figure 13 The notification area of the taskbar Page 28 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual
138. terference Channel Page 129 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Operating mode of the router s WLAN This parameter defines standards of the devices that will be able to use your WLAN By default the router automatically selects a mode for clients connected to it You can specify your restrictions 802 11 B Only 802 11 b devices can connect to the WLAN 802 11 G Only 802 11b g devices can connect to the WLAN 802 11 G N 20MHz 802 11b g n devices can connect to the Wireless mode WLAN 802 11n devices operate at 20MHz channels 802 11 G N 20 40MHz 802 11b g n devices can connect to the WLAN 802 11n devices operate at 20MHz channels and 40MHz channels the channel is combined with the next adjacent channel 802 11 G N 20 40MHz 802 11b g n devices can connect to the WLAN 802 11n devices operate at 20MHz channels and 40MHz channels the channel is combined with the previous adjacent channel The maximum number of devices connected to the wireless network Max Associated Clients of the router When the value 0 is specified the device does not limit the number of connected clients When you have configured the parameters click the Change button Page 130 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuri
139. the Delete button Page 136 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Station List On the Wi Fi Station List page you can view the list of wireless clients connected to the router Station List Figure 112 The list of the wireless clients To view the latest data on the devices connected to the WLAN click the Refresh button Page 137 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual WPS On the Wi Fi WPS page you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN The WPS function helps to configure the protected wireless network automatically Devices connecting to the wireless network via the WPS function must support the WPS function Before using the function you need to configure one of the following authentication types L Open with no encryption WPA PSK or WPA2 PSK with the AES or TKIP AES encryption method on the Wi Fi Security settings page WPS Enable Disable WPS WPS Enable E Change Information Default PIN code WPS Status Configured SSID DIR 632 Network Authentication WPA2PSK Encryption AES Encryption key 76543210 Refresh Reset to unconfigured Connection WPS Method PBC Connect
140. the Enable checkbox and click the Change button Page 176 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Control This menu is designed to create restrictions on access to certain web sites URL Filter On the Control URL filter page you can specify restrictions on access to certain web sites Control URL filter Configuration URL addresses URL filter configuration Enable Disable URL filter T URL filter type Block listed URLs Mi Change Figure 142 The Control URL filter page The Configuration tab To enable the URL filter select the Enable Disable URL filter checkbox on the Configuration tab then select a needed mode from the URL filter type drop down list Block listed URLs when this value is selected the router blocks access to all addresses specified on the URL addresses tab Block all URLs except listed when this value is selected the router allows access to addresses specified on the URL addresses tab and blocks access to all other web sites Click the Change button To specify URL addresses to which the selected filtering will be applied go to the URL addresses tab and click the Add button Page 177 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Control URL filte
141. the Save button To delete an account select a relevant line in the table On the opened page click the Delete button For ext2 or ext3 storages or storage partitions it is possible to create users with limited rights Select the Read only checkbox not to let the user create change or delete files In addition by default users with accounts from this page cannot access ext2 or ext3 storages or storage partitions To configure access it is necessary to proceed to the USB storage Filebrowser page and assign relevant rights Page 192 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Operation Guidelines User Manual CHAPTER 5 OPERATION GUIDELINES Supported USB Modems GSM modems e Huawei E1550 e Huawei E160G e Huawei E169G Huawei E171 e Huawei E220 e ZTE MF112 e ZTE MF192 e ZTE MF626 e ZTE MF627 e ZTE MF652 e ZTE MF668 e ZTE MF752 CDMA modems e Airplus MCD 650 e Airplus MCD 800 AnyDATA ADU 300A AnyDATA ADU 310A e Axesstel MV110 e Ubiquam UM 400 WeTelecom WM D200 WiMAX modem e Samsung SWC U200 firmware version u200_rev1 2 7 40 CI14 The manufacturer does not guarantee proper operation of the router with every_ C modification of the firmware of USB modems 9 Performance of CDMA USB modems is not tested for the current firmware version Page 193 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA w
142. thentication type WPA Encryption An encryption method TKIP AES or TKIP AES The time period in seconds at the end of which a new key for WPA WPA renewal encryption is generated When the value 0 is specified for this field the key is not renewed Click the Next button to continue When all the steps of configuring the WLAN are completed the specified settings are displayed on the page Check their correctness and then click the Save button After that you get to the quick settings page Page 87 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Virtual Server Settings Wizard To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the LAN click the Virtual server settings wizard link in the Firewall section Virtual server settings wizard Virtual server settings Template Virtual Server HTTP z Name Interface WAN Private IP Remote IP Figure 69 The page for adding a virtual server On the opened page you can specify the following parameters Parameter Description Select a virtual server template from the drop down list or select Template Custom to specify all parameters of the new virtual server manually Enter a name for the virtual server for easier identification You can specify any name Select a WAN connection to which this vir
143. this check the checkbox corresponding to any LAN port and then connect to the port your TV top box For example If you chose the 1st port of the router then the prefix to connect to the port LAN1 Notice a computer connected to a dedicated port will not have access to the Internet FPP PPPS LANT LAN2 LAN3 LAN4 LANS LANG LAN7 LANS If you are not going to use IP TV click Skip to next lt Back Next gt Skip to next Figure 62 The page for selecting a LAN port to connect an IPTV set top box On the opened page select the LAN port of the router to which you will connect your IPTV set top box If in the future you need to disconnect your IPTV set top box from the specified LAN port and connect to it a computer start the IPTV settings wizard for the detailed description of the Wizard see the IPTV Settings Wizard section page 90 If for accessing the Internet and IPTV services your ISP uses virtual local area networks with identifiers VLAN ID to configure access to the IPTV service proceed to the Advanced VLAN page create a group of ports with the required value of the VLAN ID parameter Transparent type and the port to which the set top box will be connected see the VLAN section page 147 for a detailed description of the elements from the page Click the Back button to specify other settings for your wireless network Click the Next button to continue Click the Skip to next button in order not to apply t
144. through this connection For security reasons it is recommended not to select this checkbox Select the checkbox to enable protection against ARP and DDoS attacks Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 79 Page 66 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual PPTP Dynamic IP or L2TP Dynamic IP Connection Obtain DNS server addresses automatically Use this switch to enter or exit the expert mode Figure 50 Configuring PPTP Dynamic IP WAN connection If your ISP has provided the addresses of the DNS servers deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field As a rule the specified settings are enough to configure a non protected connection of the selected type If you need to specify additional settings open the expert settings mode To do this use the switch in the bottom left corner of the page Page 67 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User
145. tication types Authentication type Description Open authentication with WEP encryption for wireless network modes not supporting 802 11n devices WPA based authentication using a PSK WPA2 based authentication using a PSK Shared key authentication with WEP encryption This authentication type is not available when on the basic settings page in the Wireless mode drop down list a mode supporting 802 11n devices is selected Page 85 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual When the Open or Shared value is selected the WEP Encryption settings section is displayed the section is unavailable for the wireless network operating modes which support the standard 802 11n Wireless network settings wizard Security settings Network Authentication Open Enable Encryption WEP Default Key ID 2 y Encryption Key WEP as HEX O Encryption Key WEP 1 Encryption Key WEP 2 Encryption Key WEP 3 Encryption Key WEP 4 Figure 67 The Open value is selected from the Network Authentication drop down list Parameter Description The checkbox activating WEP encryption When the checkbox is selected the Default Key ID field the Encryption Key WEP as Enable Encryption WEP HEX checkbox and four Encryption Key WEP fields are displayed on the page For the Shared authentication type the ch
146. ting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual USB Modem To connect to a WIMAX 3G GSM or CDMA network you should use a USB modem Connect it to the USB port of the router then access the web based interface of the router and you will be able to configure a connection to the Internet WiMAX USB modem Some WiMAX operators require subscribers to activate their WiMAX USB modems prior to using them Please refer to connection guidelines provided by your operator when concluding the agreement or placed on its website 3G USB modem Your USB modem should be equipped with an active identification card SIM or R UIM of your operator For CDMA USB modems it is required to disable the PIN code check on the identification card prior to connecting the USB modem to the router 3 Contact your operator to get information on the service coverage and fees Page 17 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter l 2 5 Make sure that your PC is powered off Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC To connect via a WIMAX 3G GSM or CDMA network connect your USB modem to the USB port located on the back panel of the router If you need to co
147. to another one when the router is powered on power off the device connect the modem to the USB port and power on the router 2 Connect the power cord to the power connector port on the back panel of the router then plug the power adapter into an electrical outlet or power strip 3 Turn on your PC and wait until your operating system is completely loaded 4 Turn on your Wi Fi adapter As a rule modern notebooks with built in wireless NICs are equipped with a button or switch that turns on off the wireless adapter refer to your PC documents If your PC is equipped with a pluggable wireless NIC install the software provided with your Wi Fi adapter 5 It is recommended to use a USB extension cable to connect a USB modem to the router Page 26 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch User Manual Installation and Connection Configuring Wi Fi Adapter in OS Windows XP l Click the Start button and proceed to the Control Panel gt Network and Internet Connections gt Network Connections window 2 Select the icon of the wireless network connection and make sure that your Wi Fi adapter is on a Network Connections Eile Edit View Favorites Tools Advanced Help Ox B Pp search f Folders 733 Name Type LAN or High Speed Internet Network Tasks Q 5 Create a new connection O Wireless Network Connection LAN or High Speed Internet beato de
148. tocol that provides communication across diverse interconnected networks Figure 9 The Local Area Connection Properties window Page 24 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons Click the OK button General Alternate Configuration You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Subnet mask Default gateway Obtain DNS server address automatically Use the Following DNS server addresses Preferred DNS server Alternate DNS server Validate settings upon exit Advanced Figure 10 The Internet Protocol Version 4 TCP IPv4 Properties window 7 Click the OK button in the connection properties window Now your computer is configured to obtain an IP address automatically Page 25 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Installation and Connection User Manual PC with Wi Fi Adapter 1 To connect via a WiMAX 3G GSM or CDMA network connect your USB modem to the USB port located on the back panel of the router If you need to connect or change a USB modem
149. ttings mode The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Enable IGMP Multicast Select the onen ENOR to allow multicast traffic from the external network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Click the Next button to continue After that the page displaying all specified settings opens Click the Apply button to create the connection or the Back button to specify other settings After clicking the Apply button the page for checking the Internet availability opens see the Checking Internet Availability section page 79 Page 53 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual PPTP or L2TP Connection Click n Connect Connection name Username Password Password confirmation VPN server address Use this switch to enter or exit the expert mode Figure 39 Configuring PPTP WAN connection In the Connection name field specify a name for the connection for easier identificatio
150. tual server will be Interface f assigned Enter the IP address of the server from the local area network To Private IP choose a device connected to the router s LAN at the moment select the relevant value from the drop down list the field will be filled in automatically Remote IP Enter the IP address of the server from the external network Page 88 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual When needed settings are configured click the Save button After that you get to the quick settings page Page 89 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual IPTV Settings Wizard To configure the router to use an IPTV set top box click the IPTV settings wizard link in the IP TV section IPTV settings wizard If your ISP provides a service to IPTV you can connect a set top box directly to the router without using additional equipment To do this check the checkbox corresponding to any LAN port and then connectto the port your TV top box For example If you chose the st port of the router then the prefix to connect to the port LAN1 Notice a computer connected to a dedicated port will not have access to the Internet LAN1 LAN2 LAN3 LAN4 LAN5 LANG LAN7 LAN8 Change Figure 70 Th
151. ultifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Click n Connect Select connection type PPPoE A connection of this type requires a username and password This type is used for connection via Ethernet or via DSL Static IP A connection of this type allows using a fixed IP address provided by your ISP Dynamic IP A connection of this type allows obtaining an IP address automatically from your ISP PPTP Static IP A connection of this type is protected by a special tunnel in the standard non protected network This type is used by some ISPs It requires a username and password When this type is selected you can specify a fixed IP address for the non protected network before configuring the tunnel PPTP Dynamic IP A connection of this type is protected by a special tunnel in the standard non protected network This type is used by some ISPs it requires a username and password When this type is selected you automatically obtain an IP address for the non protected network from the ISP PPTP A connection of this type is protected by a special tunnel in the standard non protected network This type is often used for establishing virtual private networks VPN It requires a username and password L2TP Static IP A connection of this type is protected by a special tunnel in the standard non protected network This type is used by some ISPs
152. unction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual USB Storage This menu is designed to operate USB storages Here you can do the following e view data on the connected USB storage view content of the connected USB storage and configure access to it e configure the router as a print server enable the built in FTP server of the router Information On the USB storage Information page you can view data on the USB storage connected to the router USB storage Information USB storage gt Name usbi_f Total size 0 Mbyte Free size 0 Mbyte File system unknown Unmount storage Figure 138 The USB storage Information page The following data are presented on the page the name total and free space of the storage and the type of its file system If the USB storage is divided into volumes several values are displayed in the USB storage drop down list Select the needed value to view data on the volume partition of the USB storage To safely disconnect the USB storage click the Unmount storage button When the No value is displayed in the USB storage drop down list remove the storage from the router To disconnect one volume of the storage select the needed value from the USB storage drop down list and click the Unmount volume button Page 173 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM
153. used to connect local clients to the router It is mostly used to connect different types of clients which require separate connection settings NAT The group of this type is an external connection with address translation It is mostly used to connect to the Internet Later the VLAN which identifier is specified in the VLAN ID field is used to create a WAN connection on the Net WAN page Transparent The group of this type is a transparent connection between an internal port and an external connection It is mostly used to connect IPTV set top boxes Page 148 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description VLAN ID An identifier of the VLAN to which this group of ports will be assigned From the list select an available value a physical port of the router the wireless interface to assign it to this group The port will be displayed in the table at the bottom of the page Select a value for the port highlighted in the table at the bottom of the page e tagged A priority tag for the traffic transmitted through the port highlighted in the table at the bottom of the page untagged Click the Save changes button Click the Delete port button to delete the port highlighted in the table at the bottom of the page Click the Delete VLAN button to delete this group of ports form the system
154. uter Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual DNS On the Advanced DNS page you can add DNS servers to the system Advanced DNS DNS settings Manual Default route Y terface WAN gt e serve 8 8 8 8 192 168 161 140 Change Figure 121 The Advanced DNS page DNS servers are used to determine the IP address from the name of a server in Intranets or the Internet as a rule they are specified by an ISP or assigned by a network administrator The device performs the DNS relay function i e it redirects the DNS requests of users to external DNS servers You can specify the addresses of DNS servers manually on this page or configure the router to obtain DNS servers addresses automatically from your ISP upon installing a connection When you use the built in DHCP server the network parameters including DNS servers I are distributed to clients automatically If you want to configure automatic obtainment of DNS servers addresses deselect the Manual checkbox select a WAN connection which will be used to obtain addresses of DNS servers automatically from the Interface drop down list or select the Default route checkbox so that the router could use the connection set as the default gateway on the Net WAN page to obtain DNS server addresses and click the Change button If you want to specify the DNS server manually select the Manual
155. ve for a specified period of time When the checkbox is selected the LCP interval and LCP fails fields are available Specify the required values Page 97 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Parameter Description Extra options In the field you can specify additional data for encryption or authentication Optional Select the checkbox if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a Dial on demand j or ae period of inactivity in seconds after which the connection should be terminated Select the checkbox if you want to log all data on PPP connection PPP debug debian Miscellaneous NAT y firewall Y Ping Figure 78 The page for creating a new connection The Miscellaneous section Parameter Description Miscellaneous Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Select the checkbox to enable protection against ARP and DDoS attacks When all needed settings are configured click the Save button Page 98 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX
156. ved Select the checkbox if you want one WAN IP address to be used for all computers of your LAN Select the checkbox to enable protection against ARP and DDoS attacks Select the checkbox to allow the router to answer ping requests from the external network through this connection For security reasons it is recommended not to select this checkbox Page 121 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Connect automatically Iv Username Without authorization Password gt ae Password confirmation D anaes VPN server address Encryption No encrypt Authentication algorithm AUTO MTU 1456 Keep Alive a Extra options gt Dial on demand Static IP Address PPP debug IP rareivyed Figure 99 The page for creating a new connection The VPN section Parameter Description Select the checkbox to enable auto start of the connection upon the boot up of the router Username A username login to access the Internet Connect automatically Select the checkbox if you don t need to enter a username and password to access the Internet A password to access the Internet Password confirmation The confirmation of the entered password to avoid mistypes VPN server address The IP or URL address of the PPTP or L2TP authentication server
157. wireless device to the router s WLAN without accessing the web based interface of the router To do this you need to configure the following router s settings l 2 3 4 Specify corresponding security settings for the wireless network of the router Select the WPS Enable checkbox Click the Change button Save the settings and close the web based interface click the Save line in the top page menu displayed when the mouse pointer is over the System caption then click the Logout line Page 140 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the router 1 Select the PBC method in the software of the wireless device that you want to connect to the router s WLAN 2 Click the relevant button in the software or press the WPS button on the cover of the wireless device that you want to connect to the WLAN 3 Press the WPS button of the router Page 141 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Additional Settings On the Wi Fi Additional settings page you can define additional parameters for the WLAN of the router l Changing parameters presented on this page may negatively affect your WLAN Additional
158. with Built in 8 port Switch Configuring via Web based Interface User Manual Virtual Servers On the Firewall Virtual servers page you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network Virtual servers list You can add edit and delete virtual servers here Name Interface Protocol Public port Private port Private IP Remote IP Figure 129 The Firewall Virtual servers page To create a new virtual server click the Add button Page 162 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Virtual servers Virtual server settings Template Custom gt Name Interface WAN gt Protocol TCP Mi Public port begin Public port end Private port begin Private port end Private IP v Remote IP Change Figure 130 The page for adding a virtual server You can specify the following parameters Parameter Description Select a virtual server template from the drop down list or select Template Custom to specify all parameters of the new virtual server manually A name for the virtual server for easier identification You can specify any name A WAN connection to which this virtual server will be assigned A protocol that will be used by the new virtual server Select a value Protocol
159. x if you want the router to establish connection to the Internet on demand In the Maximum idle time field specify a period of inactivity in seconds after which the connection should be terminated This option is used by some ISPs Contact your ISP to clarify if this checkbox needs to be enabled Fill in the field if you want to use a static IP address to access the Internet Select the checkbox if you want to log all data on PPP connection debugging Select the checkbox if you want to allow PPPoE clients of computers from your LAN to connect to the Internet through this PPPoE connection of the router Page 44 of 197 DIR 632 Multifunction Wireless Router Supporting WiMAX 3G GSM CDMA with Built in 8 port Switch Configuring via Web based Interface User Manual Service name Authentication algorithm MTU Keep Alive Dial on demand PPP IP extension Static IP Address PPP debug PPPoE pass through Miscellaneous Enable RIP Enable IGMP Multicast NAT firewall a a a E Figure 30 Configuring PPPoE WAN connection The expert settings mode The Miscellaneous section Parameter Description Enable RIP Select the checkbox to allow using RIP for this connection Select the checkbox to allow multicast traffic from the external Enable IGMP Multi f i i able IG ulticast network e g video streaming to be received Select the checkbox if you want one WAN IP address to be used for a

DIR-632_User Manual_v.1.4.0_24.08.12_EN - D-Link

Contents

Download Pdf Manuals

Related Search

Related Contents