Digital Terrestrial Receiver SRT 5800
Contents
1. 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician 4 The product has been dropped or damaged in any way 2 www strong tv PART 2 e English STRONG DIGITAL TV 5 The product exhibits distinct change in performance Replacement Parts When replacement parts are required make sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on or next to the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable Remote control transmits a directional infrared beam Ensure to aim the remote control directly at the infrared sensor of the unit during operation If the sensor has been covered or there is a large object between the and sen2. email to our Support via www strong tv After moving the receiver to another room you are no longer able to receive digital reception The Antenna feed former new point may come through a distribution system which may reduce the digital signal now received by the receiver Try a direct feed from the antenna www strong tv 11 STRONG PART 2 English DIGITAL TV A 2 SPECIFICATIONS General Data Supply Voltage 100 240 V AC SMPS 50 60 Hz to 12 V DC Power Consumption typ 5 W max 10 W Power consumption in stand by lt 3 W Operating Temperature 0 40 C Storage Temperature 30 80 Operating Humidity Range 10 85 RH non condensing Size WxDxH in mm 260 x 157 x 34 www strong tv
3. you can edit and create your favourite list 1 Press the MENU button 2 Select Sort channels by using and press OK 3 After all desired changes are done press ESC to close the window 8 1 Defining channels as favourites The favourites list contains all channels you have defined as favourites To create a personalised channel list follow the steps 1 Select the channel you want to indicate as a favourite by using A V 2 Press OK to add the channel to the favourite list 3 Repeat this process with all channels you want to add The same procedure applies for the radio channel list Press the TV RADIO to call up the overview for the radio channels to return to the TV channel list press the TV RADIO again 8 2 Moving channels in the favourite list You can individually set the sequence of the channels within the channel list 1 Press P to highlight and edit the favourite list 2 Highlight the channel you want to move by using A V 3 Press OK to confirm 4 Move the channel to the desired position by using V 5 Press OK to store the channel at the desired position 8 3 Deleting channels in the favourite list 1 Highlight the channel you want to delete by using A V 2 Press the red button 3 To delete all the channels in the favourite list press the yellow button 8 4 Filter channels Press Yellow button and use the arrow keys W lt P to filter and sort the channels after different features Select OK to store 8
4. 5 Lock channels Here you can lock unlock highlighted channel by pressing Green button Note In order the locking get active Channel Lock has to be set to ON in Security menu see chapter 11 3 9 0 TECHNICAL INFORMATION This menu consists of Channel and System information www strong tv STRONG PART 2 e English DIGITAL TV 9 1 Channel information Channel Information solely serves to supply information on one channel However you can use it for adjusting your antenna and for improving the television reception 1 Press MENU to open the main menu 2 Highlight Technical information by using V and press OK 3 Select Channel information and press OK 4 Adjust your antenna so Signal strength and Signal quality shows a high value Note Depending on your antenna you can probably also carry out settings on the antenna 9 2 System Information 1 After step 2 above select System information and press OK Here you find technical information of your receiver relevant for support 2 Press 3 times EXIT to return to the TV programme 9 3 Software Update For this purpose the device has to be set to standby operation Every night between 1am and 5am the device checks whether a software update is available In this case you ll receive a message when the receiver is switching on the next time and software update can be started You can also start the search process manually 1 Press MENU and select System
5. instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to instruction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Ventilation Slots and openings They are provided for ventilation to ensure reliable operation of the receiver and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the receiver on a bed sofa rug or heat register This receiver should not be placed in a built in installation such as a book case or rack unless proper ventilation is provided Ensure that free airflow is maintained around the receiver Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around th
6. ERATIONS 5 1 Change a channel You can change the channel by 1 pressing the channel button P or P 2 pressing the arrow buttons A V 3 pressing P to switch between the two last selected channels 4 selecting the channel via the channel list see chapter 5 5 5 entering the channel number via the numerical keys in the channel list 5 2 Volume control Use VOL or VOL or to increase decrease the volume By pressing the MUTE button the sound is turned off The turn on the sound again press 1 either MUTE again or 2 one of the volume control buttons 5 3 Information banner The information banner is displayed every time you change the channel To display the information banner without changing the channel press INFO You can define the display time of the information banner please see also chapter 6 3 1 The information banner displays m the selected channel number m the channel name m the current time m the bar showing the elapsed remaining programme time m the current and the next programme and its broadcasting time Extended information banner By pressing the INFO button again while the information banner is displayed an extended information banner with further details to the current programme will be displayed If the text is more extensive it is displayed in several pages By repeatedly pressing OK or A V you can browse the pages By pressing INFO or information to the next programme is displayed By pres
7. Set this option to ON if broadcasted subtitles should be shown automatically in the selected language default OFF 6 3 Menu Settings 6 3 1 Info Banner Duration Here you define how long the information banner has to be shown after changing a channel If you want to completely eliminate the information banner select None 6 3 2 Info Banner Automatic Atthe start of a new programme the information banner is automatically shown as default If you do not want it select OFF Note This option is only available if Info banner duration is set to at least 4 seconds 6 3 3 Menu Language Set the language of the OSD This function is also available via Language Settings see chapter 6 2 6 3 4 Menu Transparency Here you can set the transparency of the OSD If you do not want it select None www strong tv STRONG eae DIGITAL TV 6 3 5 Menu Transitions Select the speed of the menu transitions between smooth medium and fast 6 3 6 Menu Background Effect Here you can select between 6 different background effects 6 4 Channel Search Settings See chapter 7 6 5 Power Settings Here you can select the time after which the box automatically switches into Standby Default set to Off 6 6 Miscellaneous Settings 6 6 1 Time Zone Adjustment Select whether you want to have local time set to Greenwich time automatically or if you want to specify it manual 6 6 2 Time Zone Select the entry GMT 01 00 for G
8. e power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product
9. el by using the arrow buttons or press OK to close the channel list 0 Note If the receiver is switched to radio mode you can also carry out the previously described actions for the stored radio channels 5 5 Electronic Programme Guide EPG The electronic programme guide EPG offers information about programmes which will be broadcasted in the next week on the current channel e Note m Not all channels offer an extensive EPG m Many broadcasting services broadcast the current day programme but do not offer detailed descriptions m There are broadcasting services which do not offer any EPG information Due to the progressive technical development more and more broadcasting services will extend this offer in the future Select the desired channel and press EPG The following functions are offered to you m If you require more information on a programme highlight it by using V and press INFO m Change to another day use P to return use n order to switch between the programmes of the afternoon and evening press the colour buttons displayed in the EPG m By pressing the channel P P you can view the EPG of another channel m If you want to adopt a programme into the timer list highlight it and press blue for setting timer Confirm the following request by pressing OK Close the EPG by pressing ESC 6 0 BOX SETTINGS 1 Press MENU to open the main menu Box settings is highlighted by default 2 Press OK 3 B
10. ermany and Central Europe plus 1 hour difference to Greenwich time 6 6 3 Summer time Set Summer time to Off or On depending on the current season If you selected the setting Automatic in Time Zone Adjustment above then receiver obtains the information regarding summer time from the current selected channel automatically 6 6 4 Audio Format To select audio output between Stereo and different Mono options 6 6 5 Dolby Digital Automatic Enable Disable automatic detection of Dolby Digital audio channels Only enable this option when you have connected a Dolby Digital supported system 6 7 Restore Factory Settings You can reset the receiver to default settings Note The defined settings and CH lists will be deleted 1 Press MENU to open the main menu 2 Highlight Box settings by using W and press OK 3 Highlight Restore factory settings and press OK 4 Set Yes by using and press OK The receiver will reboot It switches off and shortly afterwards switches on again and will start with First installation see chapter 4 7 0 SEARCH FOR CHANNELS In the Search for Channels menu you can choose between Automatic search and Manual search If you are using an Active Antenna you can select it to ON in Antenna Settings in order to get stronger signal After the first installation see chapter 4 if you want to search again for channels or to add specific channels that are additionally broadcasted Channel search
11. information in Technical information 2 Highlight Update Software by using the arrow keys 3 Press OK to start software update 10 0 TIMER 8 timer events can be programmed here Press OK for Edit to enter desired parameters Follow explanation in info banner Select OK for confirmation By pressing Green button you get into Timer Settings menu Here you can adjust the display time of the Warning message which appears before starting of an event Also you can set the Default timer type selecting between Reminder and Record Timer can also be set directly from EPG by pressing Blue button there In this case the highlighted event will be directly stored in Timer schedule table 11 0 SECURITY 1 Press MENU and highlight Security by using the arrow keys 2 Press OK 3 Enter the PIN code and confirm with OK e Note The default PIN code is set to 0000 The displayed information will help you to select the correct settings m Selecting and altering the settings is carried out as usual with the arrow keys m The displayed window can be closed by pressing ESC 11 1 Receiver Lock Set this option to ON if you want to protect your receiver against unauthorized access When the receiver is switched on the next time the PIN code will be requested the default PIN code is 0000 11 2 Menu Lock Set this option to ON if you want to protect your menu against unauthorized access When the menu is called up the next time the PIN code
12. ler Switch receiver s Antenna Power ON connect external feed No picture or sound Scart AV is not selected on your TV TV or VCR are not connected to main Switch to correct TV input Check mains lead Sound but no picture Antenna poorly adjusted or defective Program is being broadcasted with altered parameters SCART connector not fully plugged in Check Antenna Do an automatic search see chapter 7 Check SCART connector Poor image quality or no colours Wrong TV SCART out signal Inappropriate video type selected Try changing from RGB to CVBS or vice versa Set video output according to TV set video requirements Cannot receive a channel that you could receive before Channel is no longer broadcasted Interference with DECT phones or wireless equipment Channel is being broadcasted with altered parameters None Move phone wireless equipment away from the receiver to a location where interference ceases Do an automatic channel scan Certain channels cannot be received from time to time These services are not transmitted 24 hours a day and are sometimes not available This is not a fault No response to remote control unit RCU Receiver off RCU not aimed correctly Front panel obstructed RCU batteries exhausted Plug in and turn on Aim RCU at front panel Check for obstructions Replace RCU batteries Forgotten or lost PIN code Contact local Service Hotline or send
13. n the main menu 2 MUTE To turn the sound on or off 3 STANDBY To switch to on or standby 4 ESC To return to the previous screen or menu 5 TXT To open teletext if available on current channel 6 SUBT To select subtitles language out of available ones on current channel 7 TV RADIO Toggles between TV Radio modes 8 EPG To call Electronic Programme Guide 9 FAV To access your favourite channels In CH list to switch between FAV and main list lt gt Navigates left right Increases or decreases volume in live view mode Navigates up down Selects the next or previous channel in live view mode 12 OK Confirmation 13 COLOR KEYS RED GREEN YELLOW BLUE To operate different functions in menu screens or in teletext BLUE in view mode calls Picture and Audio settings YELLOW in view mode functions as AUDIO button 14 1 To display now and next event information 15 P Channel up down 16 VOL Increase decrease volume also during EPG and TXT mode 17 0 9 Numeric buttons 18 P To switch between the last two viewed channels In CH list to switch between FAV and main list 19 AUDIO To select audio mode 2 5 Installing the Batteries Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment e Note The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries 2 6 Using the Remote Control To use the
14. o alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket Follow the
15. o y TR ON G Digital Terrestrial Receiver SRT 5800 DIGITAL TV STRONG Picture similar 9800 setae PREMIUM User Manual EZ m P NAGRA gt d KUDELSKI GROUP pista Nagra Canales TV Int www strong tv t t A trav s de la TDT llega su hogar una oferta de contenidos de calidad en modalidad de pago gracias al nuevo sistema TDT Premium PREMIUM Esta tarjeta es su llave para la TDT Premium con ella podr darse de alta a las distintas ofertas de TDT de pago de forma independiente Antes de contratar los servicios debe tener en cuenta los siguientes pasos 1 Instalar su receptor siguiendo las instrucciones del manual de instalaci n 2 Busque el canal TDT Premium que le interesa en la lista de programas de TDT ya sintonizados de su receptor Si detecta el canal TDT Premium su equipo ya est preparado Recuerde que todav a no podr visualizar el canal dado que est codificado 3 En caso de que no detecte el canal TDT Premium resintonice su receptor Si dispone de un receptor al finalizar la funci n de sintonizaci n aparecer en pantalla uno de los siguientes mensajes m Servicios de pago disponibles Guarde la configuraci n Su equipo ya est preparado m Servicios de pago no disponibles Usted no recibe el canal TDT Premium P ngase en contacto con su instalador 4 Introduzca la tarjeta en el receptor 5 Ahora puede contratar las distintas ofertas de cada ope
16. r 1 4 Accessories m 1 User Manual m 1 Remote control unit W 2x Batteries AAA type m Power supply 230 V AC 50 Hz to 12 V DC Note The batteries supplied do not contain hazardous substances such as Mercury Cadmium or Lead The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries They must not be disposed with your household waste but to a local collection system If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 2 YOUR RECEIVER 2 1 PIN code default 0000 2 2 Front panel Fig 1 1 Power button To switch ON or into Standby without using the remote control 2 Channel up down To change channels without using the remote control 3 Smart Card Slot www strong tv 3 STRONG PART 2 e English DIGITAL TV 2 3 Rear panel Fig 2 1 DVD VCR SCART To connect to a Video or DVD recorder 2 TV SCART To connect receiver with your TV set using a SCART cable 3 Audio L R To connect receiver with an amplifier using A V cinch cable 4 S PDIF Optical To connect your receiver to a digital audio amplifier 5 TO TV To connect a TV set or to connect an extra receiver 6 ANT IN To connect an antenna for reception of broadcasting signal 7 12 V connector To connect the 12 V power adaptor 2 4 Remote Control Fig 3 1 MENU To ope
17. rador de forma independiente Para cualquier duda consulte la web www tdtpremium es Registre su tarjeta Premium universal Para obtener m s informaci n sobre como darse de alta a cualquiera de los canales de pago actualmente vigentes simplemente llame al siguiente n mero de tel fono T 807 170 444 EL PRECIO MAXIMO DE ESTA LLAMADA ES DE 0 41 EUR min SI LLAMA DESDE TELEFONO FIJO Y DE 0 75 EUR min SI LLAMA DESDE UN TELEFONO MOVIL IMPUESTOS INCLUIDOS ESTE SERVICIO ESTA PRESTADO POR TELEQUEST Figure 1 STRONG Figure 2 Figure 3 1 3 2 4 6 5 7 9 8 11 10 10 12 11 13 13 14 15 16 17 18 19 Amplificador Salida Adaptador Euroconector TV audio digital coaxiala TV de corrient Figure 4 Euroconector DVD TV Hi Fi Amplificador Antena Grabador video PART 2 e English STRONG DIGITAL TV TABLE OF CONTENTS 1 INSTRUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 2 YOUR RECEIVER 2 1 PIN code default 0000 2 2 Front panel 2 3 Rear panel 2 4 Remote Control 2 5 Installing the Batteries 2 6 Using the Remote Control 3 0 CONNECTIONS 4 0 FIRST TIME INSTALLATION 5 0 BASIC OPERATIONS 5 1 Change a channel 5 2 Volume control 5 3 Information banner 5 4 Teletext 5 5 Favourites list 5 6 Electronic Programme Guide EPG 6 0 BOX SETTINGS 6 1 Video Settings 6 2 Language Settings 6 3 Menu Settings 6 4 Channel Search Settings 6 5 Power Settings 6 6 Miscellaneous Set
18. remote control point it towards the front of the digital receiver The remote control will not operate if its path is blocked Note Sunlight or very bright light will decrease the sensitivity of the remote control 3 0 CONNECTIONS Fig 4 4 0 FIRST TIME INSTALLATION Switch on the receiver by pressing the power button and wait until you see the welcome screen 1 Use V on your remote control to select the language of your preference and press OK 2 The settings window is displayed 3 Set the desired values by using lt P to change the displayed values and by using V to switch between options 4 By using the A V buttons go to OK field and press OK on remote control Use lt P to modify the start and end frequency values if desired 6 Use lt P to determine the channels to be searched for All channels or Free to Air only 4 www strong tv PART 2 e English STRONG DIGITAL TV Note By pressing ESC button you can get back to the previous installation steps 7 Go to the OK field by using the W buttons next to Start scan Press OK button on remote control to start the scan mode By pressing ESC button you can stop the scanning at any time As soon as the search is completed a message is displayed Confirm this and the next message by OK to proceed to the TV replay Note To start a new initial installation you need to reset the receiver to its default settings see chapter 6 7 5 0 BASIC OP
19. settings Highlight the Channel search settings and press OK Specify whether the channel list is to be automatically updated Automatic or not Off Automatic search This scan mode is recommended due to its feature of automatically finding all receivable channels 1 Highlight Automatic search and press OK 2 Press OK to start automatic scanning 8 www strong tv PART 2 e English STRONG DIGITAL TV 3 After the search is completed use lt P to choose whether the channels found are to be added to the old list standard setting m old channel list has to be overwritten new found channels to be discarded 4 Press OK Manual search Manual search enables the specific search for an individual channel e g if you want to scan for a specific channel and you know the information on the channel and frequency 1 Highlight Manual search and press OK and select the adjustable values by using V 2 Set the Frequency by using db 3 Or enter the Frequency MHz via the numerical buttons 4 Choose whether you want to search for All channels or Free to Air channels 5 Highlight OK and press OK to start manual search If channels were found follow step 3 described in Automatic search see above If no channels were found a message is displayed Press OK 8 0 SORT CHANNELS Possibly the channel list may appear too complex to you or contain channels that you are not interested in Via the Main menu
20. sing you return to the information on the current programme Press ESC to close the information banner 5 4 Teletext Press TXT to call up the teletext m Use the numerical buttons to enter a specific page m Use gt or the yellow or blue colour button to go to the next or previous page m Use the red or green colour button to go to the next or previous subpage if available m By pressing P and P you ll go 100 pages forwards backwards to the next full hundreds g 462 gt 500 600 m Use V to highlight a page number on the contents pages and press OK to go to the selected page If you press TXT again the teletext will be transparent over the TV screen By pressing it again teletext will be completely hided Alternatively you can hide the teletext by pressing EXIT 5 3 Favourites list Press FAV to open the channel list If no other window on the screen is opened you can also call up the channel list by www strong tv STRONG PART 2 e English DIGITAL TV pressing OK This list contains all TV channels which were found and stored during automatic channel scanning By pressing FAV again the favourites list is displayed indicating the channels you have favoured by an asterisk m By using AY you highlight the next previous channel in the list W Press OK to display the selected channel in the background m The channel list remains open for another several seconds During this time you can select another chann
21. sor or it is exposed to direct sunlight or a strong artificial light fluorescent or strobe light the sensor may not be able to receive the remote signal In this case change the direction of the light or reposition the unit 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully m Refer to the user manual of your TV and your antenna m Make sure that the Audio Video connectors and outdoor components of the antenna are in a good condition and the Audio Video connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates a warning information Tips Indicates any other additional important or helpful information MENU Represents a button on the remote control Bold Character Move to Represents a menu item within a window Italic Characte
22. st cases RGB is the correct selection 6 www strong tv PART 2 e English STRONG DIGITAL TV 6 1 4 VCR Output Format It changes automatically according to TV Output Format settings 6 1 5 Automatic AFD The broadcasted picture format may deviate from the picture format to be displayed AFD recognizes and corrects it if ON is selected 6 1 6 Teletext You can choose if your receiver or your TV set displays teletext If External TV is selected then you can use the TEXT button on your TV set remote control for displaying it 6 1 7 Restore Default Settings In this menu you can reset the configuration for the Video Settings to previous set default values 6 2 Language Settings 6 2 1 Menu Language Here you set the language ofthe OSD on screen display 6 2 2 Audio Language Select audio language for the programmes 6 2 3 Second Audio Language Select an optional audio language for the programmes If the programme is not broadcasted in the language set under Audio language the Second audio language is used 6 2 4 Audio V O Select if you like to automatically detect the original audio provided by the broadcaster 6 2 5 Audio Description Automatic Enable or disable audio description provided by the broadcaster 6 2 6 Subtitle Language Select a language for the subtitle 6 2 7 Second Subtitle Language Select an optional subtitle language see also Second audio language 6 2 6 Subtitles Automatic
23. tings 6 7 Restore Factory Settings 7 0 SEARCH FOR CHANNELS 8 0 SORT CHANNELS 8 1 Defining channels as favourites 8 2 Moving channels in the favourite list 8 3 Deleting channels in the favourite list 8 4 Filter channels 8 5 Lock channels 9 0 TECHNICAL INFORMATION 9 1 Channel information 9 2 System Information 9 3 Software Update 10 0 TIMER 11 0 SECURITY 11 1 Receiver Lock 11 2 Menu Lock 11 3 Channel Lock 11 4 Parental Control O O O O v0 x0 x0 i0 i0 0 00 00 00 OY Ui Ui Ui A HAH e UJ NJ 11 5 Change Device PIN 1 12 0 PAY TV DETAILS 11 TROUBLESHOOTING 11 A 2 SPECIFICATIONS 12 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004 108 EEC and 73 23EEC RoHS 2002 95EEC Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change All product names are trademarks or registered trademarks of their respective owners STRONG 2009 All rights reserved 10 2009 www strong tv 1 STRONG PART 2 e English DIGITAL TV 1 INSTRUCTION 1 1 Safety Instructions This receiver has been manufactured to satisfy international safety standards Please read the following recommended safety precautions carefully The lightning flash with arrowhead symbol within an equilateral triangle is intended t
24. will be requested the default PIN code is 0000 11 3 Channel Lock Set this option to ON if you want to protect defined channels against unauthorized access After selecting to ON the option Lock Unlock Green button will appear in Sort Channels menu where you can then lock unlock channels 11 4 Parental Control Here you can define a minimum age for specific programmes These programmes are PIN code protected and can only be unlocked with the PIN code 10 www strong tv PART 2 English STRONG DIGITAL TV 11 5 Change Device PIN Here you can specify your personal PIN code 1 Press OK and enter the current PIN code 2 Confirm by pressing OK 3 Enter your new PIN code and press OK 4 Enter new PIN code again and press OK 12 0 PAY TV DETAILS Showing Smart Card Purchase history and Subscription information TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact the dealer Do NOT open the receiver cover It may cause a dangerous situation and the warranty will get void Problem Possible cause What to do No signal found Antenna is disconnected Antenna is damaged misaligned Out of digital signal area Active antenna requires to switch ON antenna power external feed Check Antenna lead Check Antenna Check with dea
25. y using V highlight the desired option and press OK to open the submenu Selecting and altering the settings is effected as usual by means of the arrow keys W DP a window that is inserted can be closed by pressing ESC 6 1 Video Settings The video displayed on the TV depends on the screen and picture format as well as the broadcast content format setting Screen format Select screen format according to your TV in 4 3 or 16 9 Picture format Specify what to do if format of transmitted picture is different to your TV screen 6 1 1 Screen Format 16 9 If you have a 16 9 Widescreen screen you can select one of the following options for 4 3 formatted pictures Stretched image in 4 3 format will be screen filled by vertically compressing images to avoid cutting off the top and bottom Pillar box reduces a 4 3 picture to 16 9 format by inserting a black bar left and right Zoom images in 4 3 format in a screen filled by cutting off the top and bottom 6 1 2 Screen Format 4 3 With a standard screen you can select following options regarding 16 9 Widescreen pictures Letter box 16 9 reduces pictures in 16 9 mode by inserting a black bar above and below Pan Scan pictures will be screen filled by cutting off pictures left and right Letter box 14 9 compromises between both settings by inserting small black bars and cutting off a bit left and right 6 1 3 TV Output Format Formats RGB Video CVBS and S Video Y C are provided In mo
Download Pdf Manuals
Related Search