Home
        Product Information Guide (PIG) - Epson America, Inc.
         Contents
1.  PD190R    P35024  0 48  FOLTS       Reliability    Printer mechanism  10 million lines    Thermal head  100 million pulses  50 km  MTBE  120 000 hours   MCBE  16 million lines   Autocutter  500 000 cuts   Electrical   Battery  Lithium ion  part OT BY6OII   Input voltage  DC 24 V Max  1 5 A or    DC 12 V Max  1A    Charging time  2 5 hours    Safety    Electromagnetic interference    USA  FCC ICES 003 Class A  Canada  CAN ICES 3  A  NMB 3  A   Safety standards  Directive 1999 5 EC    Environmental    Operating temperature range        Temperature  32 to 113  F  0 to 45  C    except for print quality     Humidity  10 to 90  RH  except for paper   Storage temperature range        Temperature   13 to 158  F   25 to 70  C    except for print quality     Humidity  10 to 90  RH  except for paper   Operating noise  53 dB    Dimensions    Mobilink P80    Dimensions   H x W x D   2 5 x 4 3 x 5 5 inches   64 x 110 x 140 mm     Weight  approx  1 1 lb  500 g    including battery and belt clip  excluding  roll paper     Mobilink P80 Plus    Dimensions    H x W x D   2 7 x 4 3 x 5 5 inches   64 x 110 x 140 mm    Weight  approx  1 4 lb  640 g    including battery  excluding belt clip and  roll paper     Control Panel    LEDs  D  Power     On when power is on     Flashing when printer is powering off  when the Feed button  is pressed or standing by in software set up mode  and when a  wireless LAN printer is activated     Error    On when the printer is offline  paper out  power on  initiali
2. EPSON    EXCEED YOUR VISION    Mobilink     P80  amp  P80 Plus Mobile Receipt Printer    Product Information Guide       Ni A eee ee Oe ee or 2  FNGCESSOLICS daa a ce ee ee wade eae ae eee eee hace eee hace alain eee eee oes 2  Patr op OION eia reran EREE EEE e Sono a See e ci trad Seep conse ere eueesee eae ees 2  K rr ke oa ee a a Ga So a eee ea ee ee es a ee ees 2  Renay eeaeee i eE espe aw Eo A 3  Plestmicil E a E E E E E E EEE E E E E E OE 3  S a IP PO no E EE E E are E E E ores E E E E A 3  E  yironmental eos  55 ose neo eA Homes o a EE EEE esos 3  LEGIONS SAA 3  COMO Wane  a2 ta oe ce nee en oman eee baee nash een anee eee nana e aes Ge Boe oe 3  Chance tie Paper Ve sas sapito ste eae e same ance ere ita psa ibi ia Deia Sarees 4  Cord Papers us po baca Seren tesee Saree dica pa cohen ee eo act hee 4  ta A AAA ead pees ee Geek Ae QW ee R D E See Reon Ree R r R Goe aA 5  econo  siete  RADECIANE a ne ee a es ee eee ee ee ee ee paras ee ee eee 5  Cieanine the Thermal Head 2onaabacwdrtdenesbeaeednebaoud saree ora oa bie ha ao eden sae hes 5    Additional Information           0 0 0 cece ec cece ce ee eee e ene een eee e teen een eneenennenennes 5       Power LED Error LED Charge LED Battery LED    Wi      Error Charge       Power button Feed button    What s in the Box    Mobilink P80 or Mobilink P80 Plus printer  User   s manual and setup guide   Small thermal paper roll  for operational testing   Battery  model OT BY80  with user   s manual   USB cable saddle    LD O O O 
3. Ll    Belt clip  attached to printer   I Paper guides  Mobilink P80 Plus only     Note  The illustrations show the Mobilink P80 and apply to both the       Mobilink P80 and Mobilink P80 Plus printers unless otherwise noted     Accessories    AC DC power supply PS 11 C32C825375    Battery OT BY60II C32C831091  Multi battery charger OT CH60I   320825374       2   Mobilink P80  amp  Mobilink P80 Plus    Printer Specifications    Printing  Print method  thermal line printing  Dot density  203 dpi x 203 dpi   dpi   dots per inch  25 4 mm    Print width  2 84   72 1 mm   576 dots  48 columns     2 69   68 3 mm   546 dots  42 columns     Characters per line  font A  48  font B  64  48 columns   font A  42  font B  60  42 columns     Print direction  unidirectional with friction feed  Print speed  3 94  sec   100 mm sec   maximum    Paper feed speed  approx  3 94  sec   100 mm sec       continuous paper feed     Character sets  alphanumeric  95 characters   international  18 sets  extended graphics  128 x 43 pages   including a user defined page     Interfaces   Built in  USB 2 0 Full speed   Wireless  Bluetooth   or IEEE 802 11b g n  2 4  Ghz   802 11a n  5 Ghz   depending  on model    Media   Paper type  thermal roll paper   Paper size  80 mm  3 15    76 mm  3 00    Mobilink P80 Plus only    Max  diameter  51 0 mm  2 01   outside maximum  18 0 mm  0 71   outer core minimum   Specified paper     TF50KS EY NIPPON Paper Industries Co   Ltd     PD150R  PD160R  Oji Holdings Corporation 
4. Mobilink P80 Plus   http   www epson com cgi bin Store jsp pos index do productpk 69 1  EPSON is a registered trademark and EPSON Exceed Your Vision is a    registered logomark of Seiko Epson Corporation   Mobilink is a trademark of Epson America  Inc     General Notice  Other product names used herein are for identification  purposes only and may be trademarks of their respective owners  Epson  disclaims any and all rights in those marks     This information is subject to change without notice      2015 Epson America  Inc   7 15  CPD 40234R1    Mobilink P80  amp  Mobilink P80 Plus   5    
5. off   2  Open the roll paper cover and remove any paper     Note  When installing the paper guides  make sure that the metal  part of each guide is facing towards the inside of the printer     Metal parts          4   Mobilink P80  amp  Mobilink P80 Plus    3  Align the two tabs on the paper guide with the slots in the  bottom of the roll paper holder           ne        4  Firmly insert the metal part of the paper guide into the slot  at the front of the roll paper holder                                                              5  Repeat the above instructions for the other paper guide   then load your paper and close the roll paper cover     Loading Paper    Caution  To avoid injury  do not touch any part of the printer other  than the roll paper when the cover is open     Note  Do not open the paper roll cover when the printer is printing  or feeding paper  Only use paper that meets specifications  and do  not use rolls that have the paper glued onto the core     1  Open the roll paper cover by pressing down on the roll  paper cover open button     2  Remove the used roll paper core  if there is one  and insert    the roll paper in the direction shown below        3  Ifthe printer is attached to a belt using the belt clip  insert  the roll paper as shown below              4  Pull out some paper  and close the roll paper cover     5  Tear off the extra paper using the manual cutter     Performing a Self Test    Follow the steps below to perform a self test on roll pape
6. r     1  Make sure the printer is off and the roll paper cover is shut     2  Press and hold the Feed button and turn on the printer  The  printer prints its status and the Paper LED begins flashing     3  To continue the self test  press the Feed button for less than  one second     The self test is complete when     completed     is printed     Removing a Paper Jam    Caution  Do not touch the thermal head  because it can be very hot  after printing  Let it cool before you remove the jammed paper     Note   Mobilink P80 Plus only  If the roll paper cover will not open  the  autocutter blade may be locked  If you can see the autocutter blade  through the paper feed slot  the blade is locked  See your TIM P80  User Manual for instructions on unlocking the autocutter blade     1  Turn off the printer     2  Open the roll paper cover by pressing down on the roll  paper cover open button     Remove the jammed paper     4  Close the roll paper cover     Cleaning the Thermal Head    Caution  Do not touch the thermal head  because it can be very hot  after printing  Let it cool before you begin cleaning     1  Turn off the printer     2  Open the roll paper cover by pressing down on the roll  paper cover open button        3  Clean the thermal elements of the thermal head with a  cotton swab moistened with an alcohol solvent  ethanol or    IPA         4  Close the roll paper cover     Additional Information    The Epson support site has more information about the  Mobilink P80 and 
7. zation  paper cover open  battery charge at    S    level      Flashing if there is an error  Possible causes include     thermal head temperature too high   roll paper cover opened during printing  memory R W check abnormality  Extremely high or low power supply voltage  CPU executed an incorrect address    wireless communication error       CEL CO L L    internal circuit connection abnormality    Turn the printer off for a few seconds  then turn the printer  back on  If the LED is still blinking  contact a dealer or    qualified service person    Charge   On when the battery is being charged    Off when the battery is fully charged    Flashing when the battery is charging abnormally     Mobilink P80  amp  Mobilink P80 Plus   3    Battery    Printer Battery  condition Battery LED charge status    Power on    Power on and  buzzer sounds      You can continue printing  but replacing or charging the battery is  recommended           Replace or charge the battery         Replace or charge the battery  The printer is unable to print     Buttons    Power    Press this button to turn the power on or off  To turn the  power off  hold the button for more than two seconds     Feed    Press this button to advance the paper one line  Hold the  button down to advance the paper     Changing the Paper Size    Note   he paper size can only be changed on the Mobilink P80 Plus     To change the paper size from 3 15 inches  80 mm  to  3 inches  76 mm   do the following     1  Turn the printer 
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
Service Manual  PDF - Wilcox Bros. Co.  188KB  D GB F Funk-Empfangseinheit F.EE - ViPro  Fiche De Sécurité de ces bombe à marquer les animaux.  CAHIER DES CHARGES – POUR SOUMISSION  Manuel d`utilisation Nokia E50  Intel 320 80GB  AXIS DHP - Gamme dégraissants      Copyright © All rights reserved. 
   Failed to retrieve file