TYRECONTROL « PT » A-188
Contents
1. e select the icon Vehi figure 9 or 1 select the vehicle vvanted figure 9 In the position VEHI the Tyrecontrol displays gt The hour and the date of the last Set of the Vehicle 1 gt The pressures of this Set Copyright 2005 Alfano S A Tous droits r serv s 4 With the button 6 WV Wor select the FACE figure 10 n In the position CADRAN the Tyrecontrol displays gt Same way as in the position VEHI mam WoW E Figure 11 Figure 12 Figure 13 5 the Tyrecontrol displays the second phase of data that is NZ s to say the outside temperatures of the tires before K and after figure 11 race the gaps Copyright 2005 Alfano S A Tous droits r serv s 6 Press again the button or Ok the Tyrecontrol displays the third phase of Ga Va e that is to say the temperatures in the center of the tires before EK and after race the gaps figure 12 7 Press again the button FO the Tyrecontrol displays the last phase of data NZ 1e that is to say the inside temperatures of the tires before and after race the gaps figure 13 8 Press again the button or the Tyrecontrol displays the first phase of data of first Set 9 Press systematically the bu2. follovving the sequence programmed in the menu SETUP In the example figure 5 the device positions itself on the measure of the temperature in the center of the left rear tyre Copyright 2005 Alfano S A Tous droits r serv s 6 7 Apply the sensor of temperature on the tyre as indicated on the screen by the arrow figure 5 8 Press the central button Oy to record the measured temperature and prepare the Tyrecontrol on the next point of capture Figure 6 9 Operate this way until the end of the programmed sequence Note WAL the point of capture asphalts will be chosen automatically at the end of every sequence N before and after race 10 Since the hold of the temperature asphalts the Tyrecontrol returns automatically to the menu RECORD Note it is possible to program a sequence of capture temperatures and pressures in the order desired See Menu SETUP page 15 configuration of the captures sequence Go AJ REGALL Ae eee ea This menu consists in recalling the recorded data Procedure I want to visualize the data of the vehicle 1 with the n 117 assigned 1 With the help of the buttons select the icon RECALL figure 8 In the position RECALL the Tyrecontrol displays gt The hour and the date in real time gt The pressures of the last Set of vehicle 3 2 With the button 3 With the button
3. ok In this window press the central button to enter in the menu Ent disappears ok Press the central button to calibrate the sensor of pressure and to leave the menu figure 23 DP WAV Figure 21 SETUP Figure 22 It is useful to calibrate the sensor when the FACE indicates a value of pressure whereas no pressure has been entered in the Tyrecontrol example figure 21 The mouthpiece of the Tyrecontrol must be free IMPORTANT calibrate the Tyrecontrol with the mouthpiece FREE Copyright 2005 Alfano S A Tous droits r serv s 19 08 Calibration of the Temperature sensor Procedure Cr SETUP ok 1 In this window press the central button to enter in the menu Ent disappears 2 Connect the sensor of temperature figure 23 3 With the buttons cot adjust the temperature in the FRAME so that the displayed temperature corresponds to a temperature of reference figure 24 F CAL Le p E Ka me SETUP SETUP Figure 23 Figure 24 Note The temperature of reference must come from a precision device giving temperature The two sensors of these devices must be placed at the same place Wait that the two displayed values stabilize 4 ok Press
4. 6 Copyright 2005 Alfano S A Tous droits r serv s 10 This menu consists in transferring the data recorded in the Tyrecontrol toward a computer Procedure 1 With the help of the buttons select the icon 2 Apply the interface IR USB the A421 on the Tyrecontrol 3 The command of the function download is done from the software VISUALTYRE This menu consists in switching off the Tyrecontrol Procedure 1 With the help of the buttons 2 Wait for 3 seconds Note when the Tyrecontrol is not in the menu OFF it dies out automatically after 10 minutes of non use Copyright 2005 Alfano S A Tous droits r serv s 11 SETUP These menus consist in configuring various parameters of the Tyrecontrol 01 Assignment of the numbers of the vehicles menu 01 page 12 02 Regulating of the clock and the calendar menu 02 page 13 03 Choice of the unit Bar PSI menu 03 page 14 04 Choice of the unit C F menu 04 page 14 05 Choice of the vehicle menu 05 page 15 06 Configuration of the sequence of the captures menu 06 page 15 07 Calibration of the Pressure sensor menu 07 page 18 08 Calibration of the Temperature sensor menu 08 page 19 Procedure to reach the SETUP 1 The Tyrecontrol must be stopped ok 2 Press the central button during minimu
5. NLFANO CHRONOMETRIC SYSTEM TYRECONTROL PT A 188 User Manual EN 2 Introduction The TYRECONTROL PT allows you to Measure the air pressures Adjust the air pressures only to decrease Measure the temperatures on the surface of the tyres and the asphalt Memorize these data until 495 sets for 5 vehicles either 5x99 sets WY 1 set until 34 captures of data Hour and Date before and after race With the software VISUALTYRE recover the data recorded for a better analysis and also bring a help to the configuration of your device Replacing the batteries Switch off the device before removing the used batteries to avoid all loss of data recorded Insert the two new batteries into the device properly and make sure the terminals and are aligned correctly Battery Type 2x AA Important It is imperative to use quality batteries manufactured by reputed brands in order to prevent battery leakage into the device A failure caused by the battery acid voids the warranty Soft number and serial number of the Tyrecontrol When you switch on the Tyrecontrol the screen displays the soft number below in the middle 2 numbers and the serial number of the device on top 6 numbers 3 on the left and 3 on the right during some seconds UK V The Tyrecontrol is a device of precision and of this fact it is sensitive to the electromagnetic currents coming from
6. he menu Ent disappears With the button Word modify the unit Ok Press the central button to come out of the menu Copyright 2005 Alfano S A Tous droits r serv s 15 05 Choice of the vehicle Procedure LI a NS 5 SA Es ou ok 1 In one of these two windows press the central button to enter in the menu x Ent disappears 2 VVith the button Mor modify the type of vehicle Car or Motorbike Ok 3 Press the central button to come out of the menu 06 Configuration of the sequence of the captures Procedure ou 1 In one of these two windows depending on the menu 05 press the central Ok button to enter in the menu Ent disappears Note the explanation below is based on the example of the car Copyright 2005 Alfano S A Tous droits r serv s 2 16 The first Icon P pressure on the front left tyre appears by default blinking figure 17 SETUP gt EXIT gt EXIT Figure 17 3 4 5 6 Figure 18 Figure 19 If you want to program the first capture in another place choose then another icon on the vehicle For this you just need to move with the help of the 4 buttons ok Pn Press the central button to confi
7. is transport costs shall be paid by the user The manufacturer undertakes no responsibility for any damage to persons or goods caused by poor installation or incorrect use of the device Product modifications Alfano SA applies a method of ongoing development Consequently Alfano SA reserves the right to make changes and improvements to any product described in this document without prior notice Damages and responsibilities The products are used under the customer s sole direction and responsibility and therefore damages suffered or caused by the products shall be borne by the customer No compensation will be paid for removal of enjoyment and ALFANO cannot be held responsible for the direct or indirect consequences of their use or rendering useless ALFANO Ss obligations are duty of care and not a performance obligation The device must be disposed of with respect for environment The chronometer and its accessories contain many plastic parts When the chronometer or one of its accessories no longer functions they must be dealt with according to the laws of the country Used batteries must be disposed of in accordance with the regulations in force in your country Copyright 2005 Alfano S A Tous droits r serv s 21 ALFANO S A Rue de l Industrie 3b 1400 NIVELLES BELGIUM www alfano com 28 05 2010 Copyright 2005 Alfano S A Tous droits r serv s
8. m 5 seconds the Tyrecontrol starts in the first menu SETUP Assignment of the numbers of the vehicles Procedure to browse the menus SETUP Press the button or Procedure to leave the mode SETUP 1 After the menu Calibration of the Temperature sensor Es ex0T ok 2 Press the central button on EXIT the Tyrecontrol starts in its normal working on mode RECORD Copyright 2005 Alfano S A Tous droits r serv s 12 01 Assignment of the numbers of the vehicles Procedure Ok In this window press the central button to enter in the menu Ent 1 disappears With the button or select the vehicle wanted choice from 1 to 5 2 3 gt modify the number of the vehicle To activate the fast 4 With the buttons scrolling of the numbers maintain the pressed button more than 1 second To assign a number to another vehicle Press the button to come back behind you just need to repeat the operations as 5 explained above from the line 2 Ok to leave the menu 6 Press the central button Note After having come out of the menu only the Vehi 1 with its assigned number will be visible If the number of the vehicle 1 is adjusted on zero Important when using the Tyrecontrol the system won t permit to choose another vehicle Copyright 2005 Alfano S A Tous dr
9. oits r serv s 13 02 Regulating of the clock and the calendar Procedure 1 2 3 4 5 6 7 8 9 10 11 12 A o SETUP PS ok In this window press the central button to enter in the menu Ent disappears g With the buttons V e hour y modify the minutes To activate the fast scrolling of the numbers maintain pressed more than 1 second Q Hy ie 0 0 OT A lt gt pu EI ayo J V EN Press the button With the buttons modify the day calendar ao 0a mT modify the year Press the button to come back behind Ok Press the central button to come out of the menu Copyright 2005 Alfano S A Tous droits r serv s 03 Choice of the unit Bar PSI 14 Procedure AS GA mo mo M2 Li SETUP SETUP OR Ok l Owing one of these two windows press the central button to enter in the menu 1 Ent disappears With the button Vor modify the unit 2 FT Ok Press the central button to come out of the menu Procedure 3 04 Choice of the unit C F 1 2 3 LA V SETUP SETUP OU Ok In one these two windows press the central button to enter in t
10. rm your choice figure 18 After confirmation the icon P selected freezes the number 1 show off in the CADRAN Then another icon appears automatically blinking red arrow figure 18 If the place of the second capture doesn t suit you same thing repeat the operations as explained above figure 19 In this way you can create a combination of captures with the priorities between pressures and temperatures as you want them After having programmed the points of captures as wanted move on the EXIT icon with the help of the 4 buttons ok Press the central button _ to leave the menu Copyright 2005 Alfano S A Tous droits r serv s 17 Dr ExT Figure 20 The figure 20 shows that 4 captures points of pressures 4 captures points of temperatures have been programmed with the wanted priorities the capture point of asphalt temperature Note In RECORD mode the point of capture of the asphalt S empara se Rs will be chosen automatically at the end of every sequence before X and after gt x lt The two figures below represent the available capture places On the car left side and on the motorbike right side Copyright 2005 Alfano S A Tous droits r serv s 18 07 Calibration of the Pressure sensor Procedure 1 2
11. st measure ie gt The pressures of the last Set of the vehicle 1 Figure 1 SS VVith the button or vj select the icon Vehi figure 2 With the button or select the vehicle wanted 5 to the total figure 2 Li In the position VEHI the Tyrecontrol displays gt The hour and the date of the last Set of the Vehicle 3 gt The pressures of this Set lt ________ Figure 2 Copyright 2005 Alfano S A Tous droits r serv s 5 or 5 select the FACE figure 3 4 With the button In the position FACE the Tyrecontrol displays gt The hour and the date in real time gt The pressure or the temperature in real time according to the programmed sequence of capture Figure 3 On the example figure 3 the Tyrecontrol is ready to record for the vehicle 3 a set of captures in the Y Set 03 before race Set free of the vehicle 3 while starting with a capture of pressure on the right rear tyre Figure 4 Figure 5 Figure 6 5 Apply the mouthpiece of the Tyrecontrol on the valve of the tyre figure 4 6 Press the central button ar to record the measured pressure as vvell as the hour and the date of the moment then the point of capture displayed to the screen moves automatically
12. the central button to come out of the menu Copyright 2005 Alfano S A Tous droits r serv s 20 Warranty conditions All our devices have been subject to in depth factory tests and are covered by a 24 month warranty against manufacturing defects The warranty comes into force from the date of purchase The date of purchase is the date stated on the invoice till receipt given by the seller at the time of sale The manufacturer undertakes to repair and replace free of charge any parts which have a manufacturing defect during the warranty period Any defects which cannot be clearly attributed to the material or the manufacturer will be examined at one of Our approved after sales service centres and invoiced depending on the results The warranty does not apply in cases of device opening accidental damage negligence or misuse inappropriate or incorrect installation or failure to perform the installation in accordance with the instructions contained in the attention note and in events not associated with the rules of operation and use of the device The warranty will become null and void in cases of repair or handling carried out by unauthorised third parties Intervention under warranty does not entitle to the device replacement or warranty extension Intervention under warranty is carried out at one of our approved after sales service centres or at our head office In the latter case the item must reach our establishment postage paid that
13. the engine ignition Keep therefore the Tyrecontrol distant minimum 50cm of the engine ignition to avoid false readings or a device freezing when the engine is running Copyright 2005 Alfano S A Tous droits r serv s Switching on the TYRECONTROL Either normally pressing the central button the TYRECONTROL starts WITHOUT the backlight Either pressing for 2 seconds the same button the TYRECONTROL starts WITH the backlight Switching off the TYRECONTROL When the Tyrecontrol is not in the menu OFF it dies out automatically after 10 minutes of non use Weak battery detection As soon as the Tyrecontrol detects a weak level of batteries the word BAT appears in most menus while blinking The TYRECONTROL has 8 main options represented by 8 icons RECORD RECALL P T RST E SETUP Copyright 2005 Alfano S A Tous droits r serv s This option consists in recording new data Procedure I want to record the pressures and the temperatures for the vehicle 3 with the n 079 assigned See menu SETUP page 12 assignment of the numbers of the vehicles 1 2 3 With the help of the buttons Select the icon RECORD figure 1 In the position RECORD the Tyrecontrol displays gt The hour and the date in real time il gt The pressure in real time allows a fa
14. tton or to browse all data recorded correspondent in the selected vehicle 10 Use the button to browse the data recorded in the inverse sense The hour and the date displayed above on the right indicate the moment where the hold of WY captures of the data has been done before race ZN if not yet captures after race or after race E of Set displayed This menu consists in measuring the pressure Procedure ei 1 VVith the help of the buttons select the icon P gt 1 Apply the mouthpiece of the Tyrecontrol on the valve of the tyre The hour and the date are displayed in real time Copyright 2005 Alfano S A Tous droits r serv s This menu consists in measuring the temperature The hour and the date are displayed in real time Procedure 1 With the help of the buttons _ select the icon T 2 Apply the temperature sensor A481 on the tire This menu consists in erasing the recorded data Procedure 1 With the help of the buttons select the icon RST figure 14 2 With the button G MO select the icon Vehi figure 15 3 E select the vehicle wanted figure 15 4 Press the central button o during 1 second to erase all data of vehicle 1 figure 16 Figure 14 Figure 15 Figure 1
Download Pdf Manuals
Related Search