ENZIS INSTALLATION INSTRUCTIONS USER MANUAL
Contents
1. To reduce the risk of fire and electric shock do not attempt to connect power tools extension cords appliances and the like to the rail 8 This track system MUST BE HARD WIRED For all the wire connections use Listed Wire Nuts 9 Do not connect a rail to more than one circuit unless the rail is constructed so that it can be used with more than on circuit Check with a qualified electrician Although the rail lighting system may seem to operate acceptably a dangerous overload of the neutral may occur and result in a risk of fire 10 Secondary connections must be clean and tight to avoid arcing and overheating 11 Warranty is void in case of unauthorized modifications and or improper use CONTENTS OF DELIVERY 1 track complete with 2 end caps 3 ft The supports are to be mounted every 36 or 3 ft along the rail end cap aluminum rod The straigh track is designed for straight runs Curves and bends can be made but any modifications are permanent Caution For shortening the track use a Track Cutting Shear 230990 Cut the track carefully to avoid damage to the conductive braiding Use planning grid to decide all mounting locations prior to installation Mark drill points on the ceiling Drill all holes and mount the ceiling supports Refer to the instructions included with the different types of ceiling supports connectors and other components for further details F2. BRUCK LIGHTING SYSTEMS For more assistance with technical questions please call our 15774 Gateway Circle Tustin CA 92780 technical support staff at 714 259 9959 You can also www brucklighting com contact us by email at info brucklightingsystems com BRUCK STRAIGHT TRACK EN ART NO io a 140 008bz bronze 96 z 140 008mc matte chrome 96 TECHNICAL DATA Description The lightweight Enzis straight track is designed for straight track runs Two aluminum rods in the flexible track hold the desired shape Design Jorg Westerheide Dimensions length 96 Material PVC braided UGA Supply voltage 12V Current max 25 A circuit Load max 300 W circuit 1 THIS PRODUCT MUST BE INSTALLED BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED IN ACCORDANCE WITH LOCAL NEC CODE 2 The Enzis rail system is not intended for use with a power supply cord or convenience receptacle adaptor This rail system is to be supplied by Bruck Lighting 3 Do not install this rail in damp or wet locations 4 Do not install any part of a rail system less than 5 feet above the floor 5 Do not install any fixture assembly closer than 6 inches from any curtain or similar combustible material 6 Disconnect electrical power before adding to or changing the configuration of the rail 7 Do not attempt to energize anything other than lighting rail fixtures on the rail
3. or shortening the track use a Track Cutting Shear 230990 Aluminum rods must be removed prior to cutting Cut the track carefully to avoid damage to the conductive braiding For cleaning the system and its components Switch off power to the system Let it cool down for 30 minutes Use a non abrasive cleaning cloth to wipe track components and fixtures Do not touch fixture lamps with bare hands contaminants reduce the light output and service life
Download Pdf Manuals
Related Search