User Manual
Contents
1. User definable function keys There are 2 function keys on the monitor front panel and users could define the functions to the keys to achieve shortcut User editable video title User can edit a video title for the current camera and the title will display on the top of screen Front and Rear 2 color TALLY light 2 TALLY lights design to give live signals to people in front of the camera as well as the camera operator behind Image flip Rotate the image by 180 2 Panel Instruction Front view CVBS HDMI SDI OVERSCAN MENU F RA zoc DISPLA PHONE POWER 2 TIO M ISPLAY y 1 2 8 9 10 11 12 13 1 PHONE Earphone jack for SDI embedded audio HDMI embedded audio and analog audio monitoring 2 POWER Power on off Connect with power cable press the POWER to switch on the monitor Press again to switch off Disconnect with power cable if the monitor will not be used for a period of time 3 CVBS Press to switch the input signal to Composite video 4 HDMI Press to switch the input signal to HDMI 5 SDI Press to switch the input signal to SDI 6 OVERSCAN Overscan Underscan switch 7 MENU Press to enter Menu 8 F1 User definable function key 1 9 F2 User definable function key 2 0 RATIO 16 9 and 4 3 switch 1 ZOOM Picture Zoom in Press ZOOM to switch ZOOM1 Canon DSLR scale zoom in and ZOOM2 pixel to pixel zoom in 12 DISPLAY Display current settings Press Displ2. Model S 1071H EFP 7 EFP Field On camera LCD Monitor User Manual Please read this User Manual throughout before using Preface Congratulations on your purchase of this product Please read this user manual carefully 1 All internal technologies of this product are protected including device software and trademark Reproduction in whole or in part without written permission is prohibited 2 All brands and trademarks of SWIT Electronics Co Ltd are protected and other relative trademarks in this user manual are the property of their respective owners 3 Due to constant effort of product development SWIT reserves the right to make changes and improvements to the product described in this manual without prior notice 4 The warranty period of this product is 2 years and does not cover the following 1 Physical damage to the surface of the products including scratches cracks or other damage to the LCD screen or other externally exposed parts 2 Misuse abuse or negligent operation to the product 3 The product is disassembled by anyone other than an authorized service center It is considered normal that the LCD bright dot defects are not to exceed three 5 For any suggestions and requirements on this product please contact us through phone fax Email etc SWIT Electronics Co Ltd Address 10 Hengtong Road Nanjing Economic and Technological Development Zone Nanjing 210038 P R China Phone 86 25 8580
3. to switch off Terminal 4 Connect G with VGND to switch on the Green TALLY light and disconnect to switch off Terminal 5 Factory firmware burning Terminal 6 DC input support 6 5V 17V wide range voltage Lower voltage will generate high current and please use the high quality of DB 9 connector Terminal 7 Ground port for DC power and controlling signal Terminal 8 Composite video input The screen will not display if both BNC CVBS IN and DB 9 CVBS IN are connected Terminal 9 Ground port for CVBS signal 5 Cold Shoe Bracket The provided monitor bracket supports both cold shoe and screw mount for camera connection 1 For cold shoe anticlockwise screw the knob to draw the bolt back slide the cold shoe mount into camera and then clockwise adjust the knob to fasten 2 For screw mount clockwise screw the knob to draw the bolt directly into the screw thread of camera till fastened 3 Screw the ball head knob into monitors and lock the ball head q Lock 2 Knob 3 Cold shoe mount 4 Screw bolt 6 Specifications LCD Performance Size inches Display area 153 6x90mm Resolution 1024xRGBx600 Aspect ratio 16 9 4 3 Brightness 400cd m Contrast 900 1 Color 16 77 million colors Viewing angle Horizontal 160 Vertical 160 Video Format CVBS NTSC PAL 1080p 60 59 94 50 1080i 60 59 94 50 1080p 30 29 97 25 24 23 98 SDI 1080psf 30 29 97 25 24 23 98 SMPTE 296M 7
4. 20p 60 59 94 50 SMPTE 274M SMPTE 125M 480i 59 94 ITU R BT 656 576i 50 4801 5761 480P 576P 1080i 60 59 94 50 720p 60 59 94 50 1080p 60 59 94 50 30 29 97 25 24 23 98 Input voltage DC 6 5V 17V Power consumption lt 8W Working temperature 0 C 40 C Working humidity 10 90 Storage temperature 15 C 60 C Storage humidity 10 90 Dimensions 192x139x48mm Net weight main body 550g 8 Packing List Simple Package Luxury Package 1 Monitor 1 Monitor 2 User Manual 2 User Manual 3 Power adaptor 3 Power adaptor 4 Power cable 4 Power cable 5 Cold shoe bracket 5 Cold shoe bracket 6 Sun hood 6 Sun hood 7 LCD protection film 7 LCD protection film 8 Mini HDMI to standard HDMI cable 9 D tap to 4 pin XLR cable 10 Extension arm trestle 11 Carrying case SWIT
5. 5753 Fax 86 25 85805296 Email contact swit cc Website http www swit cc Maintenance e The Monitor 1 Please keep the signal terminals and the cooling vent away from knife edge metal or liquid in order to avoid short circuit and damage 2 Please don t try to disassemble any parts of the monitor by yourself which would probably damage the monitor and do harm to human body and it will cause the invalidation of product warranty 3 Please don t touch the screen with your fingers which would probably deface the screen 4 Please don t press the screen the LCD is extremely exquisite and flimsy eo The power Please use the power adapter provided or recommended by the manufacturer in order to avoid damage For a third party power adapter please make sure the voltage range supplied power and polarity of power lead are fit Please disconnect the power cable under the following situations 1 If you do not operate this monitor for a period of time 2 If the power cable or power adaptor is damaged 3 If the monitor housing is broken eo Working Environment 1 Please don t lay this product on the unstable place 2 Please don t lay this product in hot cold or wet location e Cleaning 1 Please clean the screen with dry and downy cloth or special LCD cleanser 2 Please do not press hard when cleaning the screen 3 Please do not use water or other chemical cleanser to clean the screen The chemical may damage the LCD 4 F
6. 7 25 24 23 98 720p 60 59 94 50 480i 59 94 576i 50 3 Menu Operation 1 Press MENU and it will display menu system 2 Revolve OK to select an item The selected item will be highlighted display 3 Press OK to enter the selected item 4 Under menu system press MENU to back to previous menu The menu will automatically save and quit if it remains idle 3 1 PICTURE submenu The PICTURE submenu includes CONTRAST 1 CONTRAST 0 100 value adjustment SYSTEM BRIGHTNESS 2 BRIGHTNESS 0 100 value adjustment OSD 3 HUE 0 100 value adjustment Li SATURATION Only available under CVBS NTSC input ias SHARPNESS 4 SATURATION 0 100 value adjustment ring 5 SHARPNESS 0 100 value adjustment a ADJ OK EXIT 3 2 SYSTEM submenu The SYSTEM submenu includes 1 RATIO Aspect ratio 16 9 4 3 selection 2 SCAN UNDERSCAN OVERSCAN selection PICTURE lt 16 9 3 ZOOM OFF ZOOM1 and ZOOM selection ny ZOOM1 Canon DSLR scale zoom in OSD a ZOOM2 Pixel to Pixel zoom in TITLE 4 MARKER Select and set the safe area scale from DISPLAY er 80 85 90 and 95 F KEY 4 YES 5 FLIP Select ON to flip the picture by 180 Rae 6 RESET Select YES to recover all to factory setting ADJ ox OK menu EXIT 3 3 OSD submenu The OSD submenu includes 1 LANGUAGE Menu language selection PICT
7. URE LANGUAGE al ENGLISH 2 H POSITION Menu horizontal position 0 100 SYSTEM po MN E adjustment real time preview and default value 50 OSD eae m 3 V POSITION Menu vertical position 0 100 TITLE arr m adjustment real time preview and default value 50 DISPLAY 4 DURATION Menu timeout setting 5 60 F KEY Set a time in seconds in which the menu will PIP automatically quit if remains idle Default 15 EXIT 3 4 TITLE submenu Revolve OK button to select the letters and press OK PICTURE to input Select SPACE to input space and DEL to delete SYSTEM the left letter Max 10 letters are supported OSD After setting press MENU the system will save data to current user and quit menu The menu will automatically DISPLAY save and quit if it remains idle F KEY PIP 3 5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when DISPLAY button is pressed PICTURE Revolve OK to turn on off the items mm MARKER 1 INFO Including Input format aspect ratio mo TITLE underscan overscan zoom status ee MARKER 4 3 2 MARKER Safe area DISPLAY 3 TITLE User edited title F KEY 4 MARKER4 3 The 4 3 scale mark on 16 9 image PIP Only available under HD input ADJ OK EXIT 3 6 FKEY submenu The F KEY Settings Submenu is to define Function Key F1 and F2 The available function items are PICTURE FLKEY 4 OLRATIO SYSTEM 01 RATIO Aspect rati
8. ay to display safety mark title and the current input signal information 3 OK Select and Apply Under menu system revolve OK to adjust settings and press to apply and out of menu system directly revolve OK to adjust volume 144 TALLY Light Red and Green 2 color TALLY indicator Rear view 1 DC 12V IN Connect with the package supplied DC 12V 4 pin XLR power adapter For 3 party power adapter please ensure the voltage is 6 5 17V and Pin 1 Negative Pin 4 Positive 2 TALLY Light Red and Green 2 color TALLY indicator 3 CVBS IN Composite video input BNC connector 4 SDI LOOP 3G HD SD SDI loop through output BNC connector 5 SDI IN 3G HD SD SDI input BNC connector 6 HDMI LOOP HDMI loop through output 7 HDMI IN HDMI input 8 Multi functional DB 9 port See details in Chapter 4 DB 9 Terminal Description 9 AUDIO L Stereo audio left channel input RCA connector 0 AUDIO R Stereo audio right channel input RCA connector D CVBS LOOP Composite video loop through output BNC connector The CVBS LOOP supports BNC CVBS input or DB 9 CVBS input Input formats Input Supported formats CVBS PAL NTSC 4801 5761 480P 576P 1080i 60 59 94 50 720p 60 59 94 50 1080p 60 59 94 50 30 29 97 25 24 23 98 SMPTE 425M 1080p 60 59 94 50 1080i 60 59 94 50 SMPTE 274M SMPTE 274M 1080p 30 29 97 25 24 23 98 HDMI SDI 1080psf 30 29 9
9. o switch AAA 02 SCAN Underscan Overscan switch TITLE 03 ZOOM Picture Zoom in oe 04 B W Color Black amp white switch 05 FLIP Image flip 06 PIP PIP mode switch on off BIE es ADJ or OK Men EXIT 3 7 PIP submenu The PIP Settings submenu includes 1 SUB WINDOW Switch on off the PIP window 2 SIZE Select the PIP window size from LARGE 1 SUB WINDOW OFF MEDIUM and SMALL SYSTEM SIZE LARGE 3 POSITION Select the PIP window position from ee POSITION CENTER CENTER TOP RIGHT BOT RIGHT BOT TITLE BORDER BLUE LEFT and TOP LEFT DISPLAY 4 BORDER Select the border color of PIP window F KEY from BLUE and BLACK PIP Remark If the SUB WINDOW is off the SIZE POSITION and BORDER are unavailable to adjust nam EXIT 4 DB 9 Terminal Description The Multi functional DB 9 port centralized DC power input CVBS input picture in picture switch on off and TALLY light controlling In your build up EFP system you can use only one DB 9 cable to input everything instead of the complex cable work The terminal description is as follows SGND VGND Terminal 1 2 3 4 5 6 7 8 PIP G R DC IN VGND Terminal 1 Factory firmware burning Terminal 2 Connect PIP with VGND to switch on the PIP window and disconnect to switch off Terminal 3 Connect R with VGND to switch on the Red TALLY light and disconnect
10. or first time use please tear off the factory LCD film To protect the LCD screen please post the LCD protection film offered in the package Features High resolution LCD Panel 7 inch 16 9 1024x600 16 77 million colors 900 1 contrast and H160 V160 viewing angle 3Gbps SDI support Accept 3G HD SD SDI input Multi Input Output Support SDI HDMI CVBS input and loop through output Picture in Picture The Picture in Picture mode is for cameraman to see the switcher returned CVBS video as an overlay window on the local camera SDI HDMI monitoring which is widely used in EFP system Overlay window adjustable The position and size of picture in picture window are adjustable Multi functional DB 9 port To simplify the cable connection the EFP field monitor provides a Multi functional DB 9 port for TALLY signal input CVBS returned video input PIP window on off switcher input and DC 6 5 17V power input SDI embedded audio output Convert SDI embedded audio to analog and output via 3 5mm earphone jack HDMI embedded audio output Convert HDMI embedded audio to analog and output via 3 5mm earphone jack Underscan and Overscan Switch between underscan and overscan mode Safe area The safe area is offered to mark an area of picture that can be seen on the television screens DSLR scale zoom in The Canon DSLR outputs the CMOS sensor ratio HDMI and this zoom in mode can make the effective image scale full screen on the monitor
Download Pdf Manuals
Related Search