Home
March, 2007
Contents
1. For the User e Your safety e Description e Instructions for use For the Installer e Safety information e Installation March 2007 i are e Troubleshooting From the manufacturer Please read this user manual carefully before attempting to operate the appliance and store it in a safe place for future reference This appliance and it s packaging are produced by processes that minimize waste and respect the environment Please help us to continue this effort to protect the environment by using the appliance efficiently and dispose of the packaging in a responsible manner PLEASE READ THIS SECTION AN THOROUGHLY BEFORE ATTEMPTING TO OPERATE THE APPLIANCE Read the following before using It may cause fire if you do not follow the instructions when cleaning the hood The hood must not be directly heated by the fire or other heat sources The exhaust air that the hood sucks from cooking must not be ejected to the flue which is used for exhaust emission of gas combustion or other fuels The room must be well ventilated when the hob is being used Installation e This appliance must be installed by a qualified technician e It is dangerous to modify any part of this appliance e The manufacturer declines all responsibility in case of failure to adopt proper safety measures e Ensure the location in which this appliance is installed has good permanent ventilation Page 2 e Inducted mode there must be one or mo
2. Turns the light on off A Delay off timer This program is used to clear the kitchen of fumes after cooking amp without supervision The hood continues to run for 5 minutes then shut down automatically Turbo setting This program is used to handle intensive cooking e g deep frying when activated the motor is boosted to deliver the highest airflow of 1000m hr for a period of 7minutes after which the setting returns to high speed setting To protect the motor the turbo setting can only be activated once every hour Page 6 Cleaning amp Maintenance AN Always switch off and unplug first SURFACES Wash with warm soapy water and a soft sponge Never use abrasive detergent scouring pads steel wool or solvents on any part of this appliance as this will cause irreparable damage ALUMINIUM GREASE FILTERS Wash in the dishwashers or soak the panels in a degreasing agent for an hour then rinse off and dry before re installing CHARCOAL FILTERS only in re circulating model Charcoal cannot be reused They must be replaced with the appropriate types once a year or depending on the frequency of appliance usage For this appliance to function effectively regular maintenance is a must Clogged filters restrict airflow and may cause the motor to overheat Page 7 Safety information Connection to the electrical supply For the Installer e Electrical connection must be made only in accordance to loca
3. anufacturer or its service agent or a similarly qualified person in order to avoid a hazard Description 1 Aluminium grease filters 2 Canopy 3 Main flue 4 Extension flue 5 Control buttons Page 4 Ducted or Re circulating mode e Depending on your requirement this appliance can be configured to operate in the ducted or re circulating modes e DUCTED MODE Fire proof ducting system of 150 mm diameter vent the fumes through a suitable outlet In the ducted mode only the aluminium grease filters are installed e RECIRCULATING MODE Fumes are filtered for grease and odour through the aluminium grease filters and the charcoal filters respectively and re introduced into the kitchen environment In re circulating mode both the aluminium grease filters and the charcoal filters must be installed 3 Speed Control e The hood is equipped with a 3 speed mechanical electronic control e Use the low speed for simmering medium speed for light cooking Use the high speed for frying or heavy cooking Instructions for use A Push Button Control Panel O Turns off the hood D Low speed setting D Medium speed setting High speed setting Q Turns the light on off Page 5 B Electronic Control Panel O Low speed setting Touch 3 seconds Delay off five minutes Medium speed setting Touch 3 seconds Delay off five minutes 3 High speed setting Touch 3 seconds Turbo setting 1000m3 hr seven minutes Q
4. l standards and laws e Ensure that the electrical supply complies with the setting on this appliance otherwise do not connect e The electrical connection of this appliance must be earthed If unsure check with a qualified electrician Colour code Green amp yellow EARTH Blue NEUTRAL Brown LIVE e Ensure that the power supply chord is free from any heat source or sharp objects e Replacement halogen bulbs must not exceed 20W Levelling Device When mounting the hood on the wall the level can be adjusted by turning the two screws on the motor housing Page 8 Installation Use suitable bolts to mount the appliance on a secure surface The minimum distance between the bench top and the lowest part of the hoods must not be less than 65cm or more than 75cm The location of the installation must have permanent openings for ventilation Regulations concerning the discharge of air have to be fulfilled It is strongly recommended that the hood be installed right over the exhaust air from cooking It is better not to install the outlet of the pipe in the wind direction which can prevent the exhaust air from flowing backards due to the big wind It is best to install the hood 65 75cm above the cooker Fasten the components for the exhaust outlet with screws To ensure good ejection of exhaust air the pipe must not be bended for too many times Page 9 Troubleshooting Symptoms Possible Cause Acti
5. on Check that the plug No go No electrical supply is connected Check that the main switch is turned on Aluminium grease Clean the filters and Poor airflow replace when dry Charcoal grease Replace charcoal filters with new sets Motor running but Butterfly valve Contact technician High temperature The kitchen is not Motor cuts after a safety device activated sufficiently ventilated few minutes The hood is installed too The hood must be near the cooking stove least 65cm from stove Charcoal filters not In re circulating mode Strong cooking installed charcoal filters must be smell installed Oil cup missing or not Remove aluminium filter Oil dripping onto installed and replace oil cup stove Alumnium grease filter Wash the alumnium saturated grease filters Whirring sound Foreign object in contact Contact technician with fan blade Page 10 For reliable service and original parts
6. re permanent air inlet The air collected must not be discharged into a duct used to blow off smoke from other appliances fed with electricity e The distance between the bench top to the lower part of the hood must not be at less than 65 cm or higher than 75 cm e Usean electrical connector with earth that is correct for your location e Check that the voltage in your area correspond to the appliance as indicated on the rating label e Do not connect the hood to a duct that carries combustion fumes e g fireplace Child Safety e This appliance should be operated by adults only e During Use e This product is designed for domestic use only and should never be used for commercial applications e After using always ensure that all controls are in the OFF position e When frying with a gas flame take particular care not to allow the oil or grease in the pan to catch fire e Cleaning Maintenance amp Service e Clean the grease filters often at least once monthly Heavy oil deposits is a fire hazard e Never attempt to repair this appliance by yourself Always refer to qualified Service Technicians e For your safety insist on original parts Page 3 e Always switch off the electricity and unplug the connection before conducting maintenance or cleaning Electric Chord e Ensure the supply chord is not exposed to heat chemicals or sharp objects e Ifthe supply chord is damaged it must be replaced by the m
Download Pdf Manuals
Related Search
Related Contents
FLUENT 6.3 UDF Manual Mode d`emploi - Leroy Merlin Bedienungsanleitung (Aug 2015, Firmware 2.4) LG BH8220B home cinema system iCast Transmitter Owners Manual Wiley Digital Landscape and Nature Photography For Dummies Copyright © All rights reserved.
Failed to retrieve file