MultiSpot HT3012
Contents
1. Press the Mode button 5 until the display shows d5 indicating operation in 5 channel DMX mode Shortly after that the display shows the DMX starting address Set DMX address by using the UP DOWN buttons 6 7 In this mode the knob 1 is disabled When set to this mode the unit requires 5 DMX channels DMX channel Value Range Function CH1 000 255 Red level CH2 000 255 Green level CH3 000 255 Blue level CH4 000 255 Master output level CH5 000 049 Strobe off 050 255 Strobe 050 slow 255 max speed 23 Hz Addressing has to be done as follows 001 first device CH 1 5 factory default 006 second device CH 6 10 011 third device CH 11 15 016 fourth device CH 16 20 and so on This setting is stored even if the device is switched off C Color Mode Press the MODE button 5 until the first digit on the display shows C indicating operation in color mode Choose a color by using the UP DOWN buttons 6 7 see list below NOTE The C Mode is automatically disabled when an external DMX signal is present Knob 1 determines the output level Available color presets cCOo all off C10 Blue Green C1 Red C11 Lavender C2 Green C12 Hot Pink C3 Blue c13 Flesh C4 Yellow c14 Light Blue Green c5 Pink C15 Light Green C6 Turquoise C16 Light Purple C7 Lime C17 Light Lavender C8 Orange C18 Light Blue C92. Marine C19 White DMX Modes NOTE To use unit in slave mode select the d3 DMX Mode The unit will receive DMX data from another unit which is in A or C mode and must be set to channel 1 The unit receives DMX data and mirrors the received data on the DMX output 13 If a DMX signal is present the DMX LED 3 will turn on Refer to the DMX modes below for channel information d3 DMX Mode 3 channels Press the Mode button 5 until the display shows d3 indicating operation in 3 channel DMX mode or slave mode Shortly after that the display shows the DMX starting address Set DMX address by using the UP DOWN buttons 6 7 In this mode the knob 1 is disabled When set to this mode the unit requires 3 DMX channels DMX channel Value Range Function CH1 000 255 Red level CH2 000 255 Green level CH3 000 255 Blue level Addressing has to be done as follows 001 first device CH 1 3 factory default 004 second device CH 4 6 007 third device CH 7 9 010 fourth device CH 10 12 and so on This setting is stored even if the device is switched off Getting started choosing a location Risk of fire These units of passive RGB LED panels have been designed to work in dry indoor environments at environmental temperatures up to 105 degrees Fahrenheit Do not e Operate the units of passive RGB LED panels in environments with more than 105 F environmental temperature or
3. A6_ Soft fade Green Blue Mix 2 Speed A7__ Soft fade Red Blue Mix 2 Speed A8_ Soft fade Blue Magenta Mix Speed A9 Soft fade Red Green Blue Speed A10 Hard fade Red Green Sound activation Speed A11 Hard fade Green Blue Sound activation Speed A12 Hard fade Red Blue Sound activation Speed A13 Hard fade Red Amber Sound activation Speed A14 Hard fade Green Magenta Sound activation Speed A15 Hard fade Blue Magenta Sound activation Speed A16 Hard fade Light Blue Magenta Sound activation Speed A17 Hard fade Red Green Blue Sound activation Speed A18 Hard fade all colors Sound activation Speed A19 Random speed Red Yellow None A20 Random speed Blues None A21 Random speed Red Blue Magenta None A22_ Random speed All None A23 Strobe White Sound activation Speed A24 Strobe Red Sound activation Speed A25 Strobe Green Sound activation Speed A26 Strobe Blue Sound activation Speed A27 Strobe Red Green Blue Sound activation Speed
4. a pattern by using the UP DOWN buttons 6 7 see list below NOTE The A Mode is automatically disabled when an external DMX signal is present Use control knob 1 to mix color in pattern 1 Use control knob 1 to select speed in pattern 2 through 27 Use control knob 1 from 0 to 10 to activate sound control feature for pattern 10 through 18 and 23 through 27 Use control knob 1 from 11 to 100 to control speed for pattern 10 through 18 and 23 through 27 Weight Multispot HT3012 E User interface overview In A Mode so o So i Speed Control except A1 Mix Control In C Mode Level Control Display showing the Mode DMX address LOC function etc Indicates presence of a DMX signal Indicates the sound activated mode internal microphone MODE selection button UP button DOWN button Internal microphone Switches on or off the termination for the last unit in the DMX chain Switching the display on or off with delay Maintenance not in use 12 VOLTAGE Input 90 250VAC 50 60 Hz Auto Sensing DMX Output connector DMX Input connector Description Function of Knob 1 AO Alloff None Al Static scene Mix A2 Soft fade Red Green Mix Speed A3__ Soft fade Green Blue Mix Speed A4 Soft fade Red Blue Mix Speed A5 Soft fade Red Green Mix 2 Speed
5. purchase of the Multispot HT3012 LED fixture from Apollo Apollo is the US exclusive distributor for Multiform a leading global manufacturer of professional lighting equipment with decades of experience in design production and quality assurance To meet your requirements this unit has been designed and built to the highest standards so we can assure that you have made a sound investment To take full advantage of all possibilities and for your own safety and the safety of your environment please read these operating instructions carefully before you start using the unit Product description check package which applies The Multispot HT3012 is an RGB LED panel The HT3012 LED panel uses 12 ultra bright 3W RGB LEDs and provides a unique solution for all indoor applications that require a medium angle high brightness color mixing spot light with maximum ease of use from club to stage lighting from commercial to architectural purposes Optional Accessories Optional accessories include a Mounting Tab Kit and Gel Diffusion Frames The Mounting Tab Kit includes three tabs and hardware required to mount to the front of the HT3012 unit to allow for the use of a Gel Diffusion Frame The Gel Diffusion Frame comes with a piece of one of three high transmission materials to change the beam angle from 27 to 32 40 or 65 Warranty Items are covered for defects in materials and workmanship for one year including repair parts and repair lab
6. MULTIFORM Passive RGB LED panels Other Quality Products USER MANUAL From Apollo Stainless Steel Gobos Glass Gobos PrintScenic Plastic and Glass Gobos Gel Right Arm Smart Color PRO Scrollers Smart Move Rotators Smart Move Vertical Smart Power Power Supplies Mutltispot HT EZ Iris DMX MULTIFORM Tape py Dichroics Pattern Holders Cable Tuff Stuff Clamps Wrenches 4130 Fourier Dr Fort Wayne IN 46818 USA Voice 1 260 497 9191 Fax 1 260 497 9192 International 00 1 260 497 9191 www apollodesign net Table Of Contents PAGE PAGE NNETOMUCKION sisisi 1 Getting started choosing a location 0 ssssssssceesssseeeees 4 Product deScription scssscsccsssssessssssssssssessesssessssssssssessssses 1 Getting started secure MOUNTING eesesscsssssseescccesesseeeees 4 Security advice before USC ssssscssssseseesssssssseeeeeeeeseens 2 Technical data esesssssssssssscccessssssessceecssnnessescessssnnseeeeeeee 5 Health advice sininen 3 User interface OVErViGW sssssssssssseessessssnsssseeseseessssse 5 Functional advice 3 Operatii n 6 9 Environmental advice ssosssssssesssssesssnsesssssesssssessnsees 3 Optional accessories ssssssssessseeseesnssesssesnsssnssssnse 10 Umpacking cssssscssesssessssessseessssssssssssessssssssessssessen 3 Warrranty sssssecssseeessseeensssernsstersseeenastereanteensnseen 10 Introduction Dear Customer Congratulations on the
7. ed 23 Hz Output mix presets can be activated by means of CH1 The chosen mix can be adjusted with CH2 If the value of CH4 is above 50 the unit is set to strobe mode The strobe speed for any fixed output mix chosen on the first channel can be adjusted from zero value lt 50 to 23 cycles per second value 255 If DMX value of channel 3 is equal or higher than 50 the unit works in pattern mode CH1 Pattern CH1 Pattern 000 015 Soft fade Red Green 136 150 Hard fade Green Blue 016 030 Soft fade Green Blue 151 165 Hard fade Red Blue 031 045 Soft fade Red Blue 166 180 Hard fade Red Yellow 046 060 Soft fade Red Yellow 181 195 Hard fade Hot Pink Lime 061 075 Soft fade Hot Pink Lime 196 210 Hard fade Pink Blue 076 090 Soft fade Pink Blue 211 225 Hard fade Turquoise Pink 091 105 Soft fade Turquoise Pink 226 240 Hard fade Red Green Blue 106 120 Soft fade Red Green Blue 241 255 Hard fade All Colors 121 135 Hard fade Red Green DMX Value range Function CH2 000 255 Level CH3 050 255 Chase speed CH4 000 049 Stobe off 050 255 Strobe 050 slow 255 max speed 23 Hz In this mode the knob 1 is disabled Addressing has to be done as follows 001 first device CH 1 4 factory default 005 second device CH 5 8 009 third device CH 9 12 013 fourth device CH 13 16 and so on Security advice before use Warning Read this section carefully before installing power
8. g the unit to truss be sure to secure an appropriately rated clamp available from Apollo to the hanging yoke through the center hole of the hanging yoke Attach the supplied M6 safety lug to the rear side thread insert rigging point and secure the installation with an appropriate safety cable fixed to an individual separate mounting point Be sure to only use the designated rigging point for the safety cable Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit This secondary safety attachment should be installed in a way that no part of the installation can drop more than 9 if the main attachment fails Never stand directly below the device when mounting removing or servicing the fixture The installations should be inspected every year by a skilled person to ensure safety Use the provided cable securing slots in the bracket to secure any cables using a cable tie Make sure to comply with cooling requirements of the power supply H Technical data E Operation The HT3012 has several operating modes for internal and external operation Multispot HT3012 LED s total 12 RGB LED s red 12 LED s green 12 LED s blue 12 LED type 3W RGB Beam angle 25 Power requirements 45W Max Current sensing 6 3 Ibs 2 9 kg A Auto Mode Press the MODE button 5 until the first digit on the display shows A indicating operation in auto mode Choose
9. gnifier Protection from electric shock or in high humidity be void in any case of unauthorized service by the user or other persons Protection from fire SSS 2 3 Be sure this fixture is kept at least 24 away from any flammable materials 4 Carry this product with care Dropping or heavy vibration may damage this product mechanically and or electrically 1 Do not expose this unit to any dripping or splashing liquids Do not submerge unit Do not place objects filled with liquids on the unit Do not operate this unit near open water Do not open the unit for service purposes There are no user serviceable parts inside Warranty will 1 Take care not to place the unit near sources of heat e g powerful amplifiers fog machines Allow at least 6 between this unit and other devices or a wall to allow for proper cooling Allow sufficient air convection in the unit s environment to avoid overheating Make sure air convection slots are not blocked Do not operate this unit in environmental temperatures exceeding 105 Fahrenheit 5 Do not attach gel or diffusion directly to the front of the LEDs unless using accessories on page 9 Protection from injury and damage 1 Never use accessories or modifications not authorized by the manufacturer of this unit 2 Choose a location for operation where the unit is protected from vibration and where a fixed mounting position is provided In case of overhead mounting foll
10. ing operating LA cleaning or servicing this product The following symbols are used to identify important safety information in this manual NAAA DANGER WARNING WARNING WARNING Safety hazard Risk Hazardous voltage Fire hazard LED light emission of injury or death Risk of severe or fatal Risk of severe eye electric shock damage General advice Read this manual completely before using the product Keep this manual in your records for future reference Follow all instructions printed in this manual otherwise warranty may become void wn ia WARNING Read manual before installation and operation Follow all printed security advice on the product The lightning flash with arrowhead within an equilateral triangle warns of non insulated AC main voltage inside the unit The exclamation mark within an equilateral triangle warns of important operating and maintenance instructions in the literature attached to this product Failure to follow all printed instructions in this manual may void the warranty nw The manufacturer takes no responsibility for injury or damage caused by not following the safety precautions and instructions printed within this manual Warning Class 1M LED product 1 Do not look into the beam from a distance of less than 16 inches 40 cm 2 Do not stare into the beam for extended periods at a short distance 3 Do not view the beam directly with optical instruments such as ma
11. more than 80 humidity e Operate the units of passive RGB LED panels in any closed environment unless forced air convection is provided e Operate less than 24 distance from any flammable surface Getting started secure mounting The units of passive RGB LED panels can be mounted in various ways Floor standing operation e Turn the bracket to the lower side of the unit and fold out the second bracket e Place the unit in a secure position Use the provided cable slots in the bracket to route cables e Make sure to comply with cooling requirements of the power supply Hanging Rigging ceiling mounted operation Risk of injury Overhead mounting requires extensive experience including among others calculating working load limits good knowledge of the installation material being used and periodic safety inspection of all installation material and the unit If you lack such qualifications do not attempt the installation yourself Improper installation can result in body injury Be sure to complete all rigging and installation procedures before applying power to the unit Leave the inner and outer bracket folded The unit should be installed out of reach of people and areas where persons may walk or be seated Make sure that the installation area can hold a minimum point load of 10 times the device s weight In fixed installations attach the unit with self locking screws nuts to the mounting point When mountin
12. or on defective item from date of Apollo invoice The warranty covers freight for 30 days after initial purchase Apollo does not cover any other loss resulting from product failure Products being returned for warranty repair must display the original serial number sticker Removal of the serial number sticker voids the product s limited warranty Despite the care taken for the compilation of this book Apollo Design Technology Inc cannot be held responsible for any damages resulting from errors that may appear in this book All efforts have been made to provide the most accurate up to date instructions and illustrations possible e Need assistance Call Apollo at 800 288 4626 for details Keep this information handy if requiring technical assistance dP DMX Preset Mode If you want to run the pre programmed patterns and scenes by an external DMX controller you can use the DMX Preset Mode Press the MODE button 5 until the display shows dP indicating operation in DMX Preset mode Set the DMX starting address by using the UP DOWN buttons 6 7 When set to this mode the unit requires 4 DMX channels If DMX value of channel 3 is lower than 50 the unit works with static colors DMX Channel Value Range Function CH1 000 255 Output color choice from presets see C mode CH2 000 255 Master output level CH3 000 049 Static color mode active CH4 000 049 Strobe off 050 255 Strobe 050 slow 255 max spe
13. ow appropriate rigging rules and regulations for rigging safety including the use of an approved safety cable Our units ship with integral power supplies 3 The connection to a power supply must be carried out by qualified and certified personnel only 4 Do not expose this unit to any dripping or splashing liquids Do not operate this unit near or in open water or in high humidity There are no user serviceable parts in the unit Return the unit to qualified personnel for repair Health advice This unit produces and absorbs electromagnetic radiation The strength of radiation and the sensitivity for disturbing interference conforms with CE and FCC requirements A corresponding sign is printed on the backside of the unit Any change or modification may affect the operation of the unit s electromagnetic radiation Any modification to the unit will void all electrical certification The manufacturer distributor takes no responsibility in this case Functional advice This unit is immune to the presence of electromagnetic disturbances both conducted and radiated up to a certain level Under peak conditions the unit is classified to show a class C performance criteria and may encounter temporary degradation or loss of function In such a case power down the connected power supply and power it on again to recover Environmental advice This unit is built to conform to the ROHS standards and the WEEE directive 2002 96 EC of the E
14. uropean Parliament and of the Council of the European Union Under these regulations the product shall not be discarded into regular garbage at the end of its life but shall be returned to authorized recycling stations It is highly recommended that North American users follow environ mentally safe disposal recycling practices Unpacking E Please check that the box contains the following items Main parts 1 Multispot HT3012 1 operation manual Accessory parts 1 M6 security lug 1 power cable If any part is missing please contact your dealer immediately for replacement d4 DMX Mode Press the MODE button 5 until the display shows d4 indicating operation in 4 channel DMX mode Shortly after that the display shows the DMX starting address Set DMX address by using the UP DOWN buttons 6 7 In this mode the knob 1 is disabled When set to this mode the unit requires 4 DMX channels DMX channel Value Range Function CH1 000 255 Red level CH2 000 255 Green level CH3 000 255 Blue level CH4 000 127 Master output level 128 227 Strobe 128 slow 227 max speed 23 Hz 228 255 Master level full on Strobe off Addressing has to be done as follows 001 first device CH 1 4 factory default 005 second device CH 5 8 009 third device CH 9 12 013 fourth device CH 13 16 and so on This setting is stored even if the device is switched off d5 DMX Mode 5 channels
Download Pdf Manuals
Related Search