UM 6350 CI.indb
Contents
1. Read the following instructions carefully WARNING TO REDUCE THE RISK OF FIRE ELECTRICAL SHOCK OR ANNOYING INTERFRERENCE DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE AND ONLY USE THE RECOMMENDED ACCESSORIES Read All Instructions Before you use the product read all operating instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products m Save These Instructions Save all safety and operating instructions for future reference m Heed Warnings Read carefully and follow all warning labels on the product and those described in the instructions m Follow Instructions Follow all instructions provided with this product m Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product m Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain m Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket table or cart Mount only on a stable tripod stand or bracket Follow the instructions that describe how to safe2. STRONG DIGITAL TV Digital Satellite Receiver with Common Interface SRT 6350 Cl User Manual ie U mane I an 4 a K acsoziov RD CN 50 60 Hz Max 20 W Figure 3 1 2 3 6 8 TELEVISION Fixed Satellite Dish Figure 6 Fixed Satellite Dish 1 ex pointed at Astra Fixed Satellite Figure 4 Dish 2 DiSEqC Switch ex pointed at HotBird Satellite Dish on motorized Positioner O Figure 4 TELEVISION DIGITAL AUDIO AMPLIFIER SPDIF D Figure 5 Figure 9 Safety Instructions STRONG DIGITAL TV RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE FOR SERVICING Explanation of WARNING symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the inside ofthe product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance
3. described in this chapter below Network search if this item is set to OFF then receiver will search for the channels that are available from preset transponder list of selected satellite If this item is set to ON then receiver in addition will search for the channels from transponders information about that can be found from broadcast Use this option to get new channels that appeared on satellite Search for you can select type of the channels that will be installed to your receiver if selected All channels then receiver will install Free To Air and Scrambled channels if selected Scrambled then receiver will install only Scrambled channels if selected FTA then receiver will install only Free To Air channels Once you complete all settings you can start channel search process Press RED button to setup channels from all transponders of the satellite Press GREEN button to setup channels from transponder selected in Transponder item Press YELLOW button to enter to Manual setup channels from specific transponder or to setup single channel with known Video and Audio PIDs Manual setup of channels In Manual channel search menu you can setup all channels from specific transponder or single channel To setup all channels from specific transponder Satellite indicate name of the satellite where channels will be searched Frequency Use Numeric buttons to enter frequency of transponder Polarisation control Use lt
4. in the list you should add it first using Edit satellites menu Dish number move focus of the menu to this item Use lt P buttons to select dish number to which above selected satellite belongs to Press OK button to enter to Dish setup menu see 5 2 2 Dish number means that selected satellite do not belongs to any dish 10 www strongsat com PART 1 o English STRONG DIGITAL TV Dish position this item value depends from the mode of the Dish if mode of selected dish is Fixed then this item is not selectable if mode of selected dish is DiSEqC 1 2 then value can be Not stored in case dish position for selected satellite was not stored or in range from 1 to 64 if position has been stored Select item and press OK to setup positioner More details about Positioner setup read in chapter 5 2 1 1 if mode of selected dish is GOTO X then value is GOTO X Select item and press OK to setup GOTO X function More details read in chapter 5 2 4 Transponder move focus of the menu to this item and press OK List of transponders of selected satellite will appear at right side of the screen You can select transponder in order to check signal strength and quality of reception Transponder list contains predefined transponders If you need to modify transponder list please use menu Edit satellites as described in chapter 5 2 3 If you need to scan specific transponder then use Manual scan as
5. list of installed satellites PAUSE Freeze Resume picture AUDIO Shows the list of available audio languages for the channel you are watching TEXT Shows teletext page if available If more then one teletext language available then shows the list of Teletext languages the current channel supports SUB Show the list of subtitled languages the current channel supports RECALL Switches back to previous channel ZOOM Zoom in 200 or 300 6 www strongsat com PART 1 English STRONG DIGITAL TV 3 0 CONNECTIONS 3 1 Connecting to TV amp VCR Basic connection with a SCART cable Fig 3 1 Connect the satellite signal from the LNB to the SAT IN connector 2 Connect the TV SCART connector at the back of the receiver to the SCART IN connector on your TV set Advanced connection of the receiver to the TV set and VCR Fig 4 1 Connect the satellite signal from the LNB to the SAT IN connector 2 Connect the TV SCART connector at the back of the receiver to the SCART IN connector on your TV set 3 Connect the VCR scart connector of the receiver to the SCART IN connect on your VCR set 3 2 Connecting to Digital Audio Amplifier Connect S PDIF connector at the back of your receiver to appropriated input of your Digital Audio Fig 5 3 3 Connecting to Satellite Dish Connecting a fixed satellite dish to your receiver Fig 6 Make your choice of which satellite you want to receive your signals from and have your dealer aim your dish a
6. location to measure signal strength and quality Movement speed Use lt P buttons to select between Slow and Fast Slow speed allows you to fine adjust position of the dish Fast speed can be used to adjust dish position roughly Move Use lt P buttons to move dish to the East West direction Centre position If you press OK button while menu focus is on this item then dish will be turned to centre position which corresponds to true South direction Limits Use lt P buttons to Enable or Disable software limits of your positioner Set limit Use lt P buttons to select East or West limit of dish movement range Step by step recommendations of position setup 1 Select reference transponder in order to check signal strength and quality during position setup 2 1f you do not know current direction of your dish then move menu focus to Centre position item and press OK Dish will be turned to true South Knowing your location longitude you may understand direction where necessary to move dish in order to reach position of selected satellite For example your longitude is 5 East and you want to setup dish position for Astra 1C 1E 19 East Then from centre position you need to move dish to East direction by pressing to 4 button If your longitude is 25 East then in order to setup dish position for Astra 1C 1E 19 East you need to move dish in West direction from centre position by pressing to button 3 To setup roughly position
7. of the dish set Movement speed to Fast Then move menu focus to Move item of the menu and by short presses to 4 or buttons move dish to necessary direction Check signal strength and quality indicators Once levels start increasing set Movement speed to Slow and keep adjusting dish position until get best possible values 3 Once you are sure that dish is fine adjusted press YELLOW Store or BLUE Store amp Exit button Dish position for selected satellite will be stored 5 2 2 Dish set up In this menu you can setup parameters of your dish es Dish number Use lt P buttons to select number of the dish This number used in Channel setup menu to create a link between satellite and corresponded dish configuration LNB type Use lt P buttons to select type of LNB If you set type to Customised then you should enter values of Local Oscillator Frequencies in LO frequencies menu item LO frequencies this menu item selectable only in case LNB type is Customised Press OK button 12 www strongsat com PART 1 o English STRONG DIGITAL TV and using Numeric buttons enter values in appeared dialog box Band control Use 4 buttons to select value Set to Auto in order receiver automatically select band by sending 22 kHz control signal Set to ON in order receiver generate 22 kHz control signal continuously or set to OFF in order to disable 22 kHz control signal Polarisation control Use lt buttons to select value Set to
8. unplug the power cord from the wall socket m Do not use alcohol or ammonia based liquids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the mains voltage supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock m Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside Safety Precautions m Do not open the receiver cover as you will be exposed to a shock hazard It will also void your warranty Refer all maintenance or servicing to suitably qualified personnel m When you are connecting the cables be sure that the receiver is disconnected from the mains supply voltage Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m lt is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your dealer 1 2 Storage Your receiver and its accessories are stored and delivered in
9. 5 TELETEXT function In channel view mode press TEXT button If Teletext is available in several languages then select language from the list 6 6 Subtitles function In channel view mode press SUB button List of available subtitles languages will be displayed on the screen Use lt P buttons to select language and OK to confirm To disable subtitles select OFF from the list ofthe languages 17 www strongsat com STRONG PART 1 o English DIGITAL TV A 1 TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact the dealer Don t open the receiver cover his may cause a dangerous situation Symptom Cause Remedy The LED displayon The power cord is not plugged in front panel does not light up Check that the power cord is plugged in to the wall outlet No picture or Wrong connection of the Audio Connect the Audio Video output of the Incorrect values of some tuner parameters Wrong direction of the dish sound Video output of the receiver to TV receiver to TV correctly Audio muting Press the MUTE button TV power off Turn TV on No picture The receiver can t receive the Check the antenna cable replace the signal cable or connect the cable to the receiver tightly Set the values of the tuner parameters cor
10. Auto in order receiver automatically control polarisation Set to 13V or 18V in order receiver supply LNB with selected power or set to OFF in order to disable LNB power Switch type if you use DiSEqC switch the select appropriated type Switch input select input number to which LNB is connected Dish mode Use lt P buttons to select mode between Fixed DiSEqC 1 2 and GOTO X 5 2 3 Edit satellites In this menu you can edit satellite s name angle location and transponder as well as add new satellite Press RED button to edit a satellite s properties Press GREEN to add new satellite Edit existing satellite and add new satellite functions are identical Name press OK button to edit name of the satellite On screen will appear keyboard To delete current name select Backspace 4 symbol and press OK To enter new name use AW AP and OK buttons Press RED button to save new name or press GREEN button to discard changes Angle Use Numeric buttons to enter value of orbital position of the satellite Location Use lt P buttons to select East or West location of the satellite Transponder table press OK button to enter to edit transponder table menu In this menu use RED button to edit parameters of selected transponder GREEN button to add new transponder or YELLOW to delete selected transponder To save changes you have made press YELLOW Save or BLUE Save amp Exit button 5 2 4 GOTO X set up In this menu you should set your
11. Channel will be locked in all channel lists Delete Pressing Yellow button will mark selected channel to delete To unmark channel select it and press Yellow button again Channel s will be deleted after you press Blue button Be aware after pressing Blue button channel s will be deleted from all channel lists To cancel delete operation you can press Exit button Message Do you want to save data will appear on screen Press Exit to cancel data save or OK to confirm data save 5 2 Installation The installation menu contains following sub menus Channel set up allow you to setup channels from selected satellites Dish Set up allow you to setup configuration of your dishes Edit satellites allow you to edit predefined satellites and their transponders as well as add new satellites GOTO X setup allow you to setup your location in order to use GOTO X type of positioner System setup allow you to configure system settings such as OSD language video output mode time settings software update over the satellite Parental lock allow you to define system PIN code and lock access to the menu 5 2 1 Channel set up From this menu you can setup channels from satellite s in several modes access to Dish setup menu Positioner setup if used Satellite move focus of the menu to this item Press OK to display list of available satellites Select satellite of your choice and press OK If satellite doesn t exist
12. O X positioner then select Dish position item and press OK f you use DiSEqC 1 2 positioner then Positioner Set up menu will be displayed Please refer to Setup dish position description in chapter 5 2 1 1 f you use GOTO X positioner then GOTO X setup menu will be displayed Please refer to GOTO X setup description in chapter 5 2 4 After setting up dish position press RED Autoscan button on remote control to start channel search Once channel search process is finished the receiver will switch to view mode and tune to channel number 1 All other functions of the receiver can be controlled from Main menu www strongsat com PART 1 English STRONG DIGITAL TV 5 0 MAIN MENU All the important settings and features of your receiver can be operated in Main Menu The Main Menu consists of five sub menus Channel Organiser Installation Timer Games and Common Interface Press the MENU button when the menu is off the MAIN MENU screen will appear 5 1 Channel Organiser In MAIN MENU screen press UP DOWN to select Channel Organiser and then press OK or gt to enter the Channel Organiser menu which consists of the sub menus Sort Channels Add to Favourites and Edit Channels 5 1 1 Sort Channels In this menu you can sort channels by order or move channels to specified position Note Channels are sorted in the selected channel list only Sorting of the channels in one list do not
13. P buttons to select polarisation of transponder Symbol rate Use Numeric buttons to enter symbol rate value Network search Use lt P buttons to select ON or OFF Search for Use lt P buttons to select type of channels to be installed Press RED Search button to start channel search To setup single channel Press GREEN PID button on the remote control Satellite indicate name of the satellite where channels will be searched Frequency Use Numeric buttons to enter frequency of transponder Polarisation control Use 4 buttons to select polarisation of transponder Symbol rate Use Numeric buttons to enter symbol rate value Video PID Use Numeric buttons to enter value of Video PID in decimal Audio PID Use Numeric buttons to enter value of Audio PID in decimal 11 www strongsat com STRONG PART 1 o English DIGITAL TV PCR PID Use Numeric buttons to enter value of PCR PID in decimal Press RED Search button to start channel search 5 2 1 1 Positioner setup If in Dish setup menu you have configured Dish mode as DiSEqC 1 2 then you have to setup position of the dish to each satellite that you want to install In Channel setup menu move menu focus to Dish position item and press OK button on remote control Menu Positioner setup will appear on screen Satellite Displays the name of satellite position of antenna for which you setup Transponder Use 4 buttons to select reference transponder receivable in your
14. Press RED Start The receiver will check availability of software update and propose to update software if new version is available Follow future instructions displayed on screen After software update process receiver will switch on a last watched channel automatically Note during software download process video output of the receiver will be turned off Progress of software download will be displayed on front panel indicator Note Availability ofthe software update is subject of local broadcast condition and may not work in all countries Contact your vendor to find out more about this function 14 www strongsat com PART 1 English STRONG DIGITAL TV Warning Do not switch power off and do not disconnect the receiver from the aerial during update process Information Display the information about software version installed in the receiver Factory reset This will delete all user settings and installed channels Receiver will restart with Installation Wizard menu 5 2 6 Parental lock In this menu you can set menu lock status Disabled or Enabled and change the PIN code The default PIN code is 0000 5 3 Timer You can set the timer to make the receiver perform designated actions including timer based wake up or sleep instructions to the receiver Timer number Use the lt P buttons to select Timer status Use lt P buttons to Enable or Disable selected timer If selected timer status is Enabled the addition
15. SAT OUT 1 Scart TV RGB CVBS 1 Scart VCR CVBS S PDIF Serial Port RS 232 power switch Accessories Note M User s Manual m Remote control unit m AV cable m 2x Batteries AAA type The batteries should not be recharged disassembled electrically short circuited or be mixed or used with other types of batteries www strongsat com PART 1 o English STRONG DIGITAL TV 2 0 YOUR RECEIVER 2 1 Front Panel Figure 1 1 Power On Off button 2 Channel Up Down buttons 3 MODE INDICATOR RED light indicates that the receiver is in STAND BY mode GREEN light indicates that the receiver is in AWAKE mode 4 4 digits display In STAND BY mode this indicates current time In AWAKE mode this indicates current channel number 5 Common interface slot Insert your common interface module to this slot in order to have access to appropriated encrypted channels 2 2 Rear Panel Figure 2 1 SAT OUT Gives you the possibility to connect an extra receiver analogue or digital 2 SAT IN To connect the coaxial cable from your LNB on the satellite dish to this connector 3 TV SCART Connector Use this connector to connect your receiver with your TV set using a SCART cable 4 VCR SCART Connector Use this connector to connect your receiver to your video recorder using a SCART cable Your video signal will now be looped through your receiver to your TV set 5 S PDIF Digital audio output Use this coaxial output to connect your receive
16. a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 2 www strongsat com PART 1 English STRONG DIGITAL TV 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below m Refer to the user manual of your TV and your antenna m Make sure that the SCART cable and outdoor components are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates warning information TIPS Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold Character Move to Represents a menu item within a window Italic Character www strongsat com STRONG PART 1 o English 1 4 DIGITAL TV Features amp Accessories For all digital Free To Air TV and Radio programmes via satellite m Common Interface slot compatible to all Conditional Access Modules m Fast chan
17. al items are available to select Action you can select between Power On The receiver powers on at the designated date and time Time interval The receiver switches on at the designated date and time displays the channel and then switches off after designated duration Power Off The receiver powers off at the designated date and time Cycle You can set the cycle of the action designated in the timer mode Once Every day or Weekly Start Date or Day of Week You can set the starting date or days of the week for the timer action Press OK to display calendar or list of the week days Start Time Use Numeric buttons to enter the starting time of the timer action Duration Use Numeric buttons to enter the duration of channel view when the Timer mode is set to Time Interval Channel name Press OK button to display current channel list and using navigation buttons select channel to be shown when the receiver will power on by timer event You can use TV R button to select between TV and Radio channels 5 4 Games There are three games Tetris Box and Snake 5 4 1 Tetris lt gt Move block to left or right AV drop block A OK Rotate block 5 4 2 Box A V lt gt Move the boxman and push the box 15 www strongsat com STRONG PART 1 o English DIGITAL TV 5 4 3 Snake A V lt gt change direction of snake movement 5 5 Common Interface When Conditional Access Module is inserted you ca
18. ating Temperature 0 C 40 C Storage Temperature 30 C 80 C Operating Humidity Range 10 85 RH Non condensing Size Wx D x H in mm 260 x 210 x 40 Weight 1 5 kg 19 www strongsat com STRONG PART 1 English DIGITAL TV 20 www strongsat com Environmental Issues STRONG DIGITAL TV ENVIRONMENTAL ISSUES Strong is committed to reducing the impact of its products on the environment To maximise the benefits of our design enhancements your co operation is required Electronic product recycling Packaging Do not dispose of this product with your When disposing of this OA domestic rubbish product packaging please s 2 ensure that it is recycled At the end of its useful life this product MM Packaging material is to be contains materials which when processed depolluted in waste correctly can be recovered and recycled By separation participating in the responsible recycling 9 ofthis product you will be reducing the a requirement for new raw materials and Power Saving 3 reducing the amount of material that To save power and money 5 would otherwise end up in landfill please put the product into E When you purchase a new similar product standby mode when not in your retailer may offer to take this old one use We also recommend di off you Alternatively you can take it to disconnection from mains your local recycling centre Your retailer or supply when not in use for longer local municipa
19. can download new system software automatically by satellite www strongsat com STRONG PART 1 o English DIGITAL TV 4 0 STARTING UP FOR THE FIRST TIME Ensure that your satellite receiver is correctly connected to your television and dish and your satellite signal is of good quality If you are not sure about this then ask your local strong dealer to check your installation or satellite signal Confirm that the power plug of receiver is plugged into the wall outlet Turn on the receiver The Installation Wizard will appear on screen when you power on receiver for the first time It is recommended that you do first time installation following Installation Wizard step by step It will help you easily achieve system configuration and channel installation If you are advanced user then you can skip wizard by pressing MENU button and set up channels using Installation menu 4 1 Language Selection Press OK to choose the language The SET UP WIZARD menu will appear It describes functional buttons that you should use during installation Once you read information press OK button to continue 4 2 Select Satellite The Installation Wizard preconfigured for easy installation of Astra 1C 1E 19E or Hotbird 13E For these satellites LNB configuration is predefined as Universal LNB connected to the receiver via DiSEqC 1 0 switch input 1 If your dish is aimed to Astra 1C 1E 19E or Hotbird 13E then select corresponded satellite from the
20. change order of the channels in another list l e sorting of the channels in list All satellites would not change order of the channels in list of particular satellite and vice versa Sort Red button Press RED button to select one of available sort options Alphabet A Z channels will be sorted in alphabet order Frequency Low High channels will be sorted in frequency order first channels with low frequency then with higher frequency First FTA Free To Air channels will be placed at the beginning of the list Scrambled channels at the end First scrambled Scrambled channels will be placed at the beginning of the list Free To Air channels at the end If you want to store new order of channels press Yellow Save or Blue Save amp Exit button If you do not want to store result of sorting press Exit button Message Do you want to save data will appear on screen Press Exit to cancel data save or OK to save result of channel sort Move Green button Press Green Move button to manual sort channels Use lt P A V buttons to select channel that you want to move You can also enter channel number using Numeric buttons on remote control Press OK button to confirm channel selection Now you can select new position of the channel using gt A V buttons or enter position number using Numeric buttons Press OK button to confirm new position of the channel Repeat these steps for all channels that you wan
21. d in any way 5 The product exhibits a distinct change in performance m Replacement Parts When replacement parts are required make sure that the authorized service center uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards m Safety Check Upon completion of servicing or repairs ask the service technician toperform safety checks to determine that the product is in good working order m Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus m Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable SAVE THESE INSTRUCTIONS www strongsat com STRONG Safety Instructions DIGITAL TV www strongsat com PART 1 English STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INTRODUCTION 2 1 1 Safety Instructions 2 1 2 Storage 2 13 Equipment Set up 3 1 4 Features amp Accessories 4 2 0 YOUR RECEIVER 5 2 1 Front Panel 5 2 2 Rear Panel 5 2 3 Remote Control Unit 6 3 0 CONNECTIONS 7 3 1 Connecting to TV amp VCR 7 3 2 Connecting to Digital Audio Amplifier 7 333 Connecting to Satellite Dish 7 3 4 Connecting to computer by serial cable for downloading software 7 4 0 STARTING UP FOR THE FIRST TIME 8 4 1 Language Selec
22. er and name as well as current program name Information banner can be displayed by pressing to INFO button In addition to zapping banner it provides information about next program availability of subtitles and teletext on current channel Information banner can be toggled to Extended and Signal modes by pressing RED Extended and GREEN Signal buttons accordingly In Extended mode can be displayed short description of vcurrent program if available In Signal mode displayed technical information such as transponder parameters audio and video PIDs of current channel signal strength and quality 16 www strongsat com PART 1 English STRONG DIGITAL TV 6 3 Channel list To call on screen the current channel list press OK button from view mode Use A Y lt P buttons to select channel and press OK to switch to full screen view mode 6 3 1 Fast alphabet filtering Press RED Filter button to filter channels in alphabet order At the right side alphabet will be displayed Select first letter of the channel name that you need to find in the list and press OK 6 3 2 Multi Pictures Press GREEN button to choose between 4 pictures or 9 pictures Press OK to confirm 6 4 Selection of Audio Language Press the AUDIO button on your remote control Use AV buttons to select the audio language from the list of available Use lt P buttons to select audio channel between Left Right and Stereo Press OK to confirm your selection 6
23. geographical location if your use positioner and it supports GOTO X Use A V buttons to navigate in the menu Use Numeric buttons to enter values Use lt P buttons to select an option To save changes you have made press YELLOW Save or BLUE Save amp Exit button 5 2 5 System set up In this menu you can configure the system such as Language select TV VCR settings OSD settings Time settings As well from this menu you can define Power On channel update software using Software Update menu get Information about software version installed in your receiver and do a Factory reset Language select Select Menu language preferred Audio and Subtitle languages Use AV lt P gt buttons to move the menu focus and select an item Use OK button to confirm selection TV VCR settings To set TV standard PAL SECAM NTSC or Auto Aspect conversion Letter Box or Pan amp Scan TV 13 www strongsat com STRONG PART 1 o English DIGITAL TV format 4 3 or 16 9 Scart mode RGB or CVBS press AV lt P buttons to move the cursor and OK to confirm selection OSD settings To set Banner duration how long information banner will be displayed on screen Transparency level of the menu and CAM messages On or OFF use AV AP buttons to move the cursor and OK to confirm selection If CAM messages set to OFF then information messages generated by Conditional Access Module would not be displayed on TV set screen If set to ON then a
24. isconnect it from the receiver when the receiver is not in use m Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs m Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage m Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers m Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points m Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair work by a qualified technician 4 The product has been dropped or damage
25. l authority will advise you of periods of time the collection facilities available for waste electronically products in your area User of this service will be free to you Batteries Do not dispose of the batteries DD Within the scope of the European from your handset with your F legislation on Waste Electrical and domestic waste Electronic Equipment Directive 2002 96 DE EC valid as of August 2005 STRONG provides a recycling system free of charge Where they are available for consumers to returning products after participate in your local municipal end of life For more information about or retailer collection schemes STRONG s environmental policy to you for spent batteries Batteries discarded in landfill sites or www strongsat com select About us incinerated increases the chances and Environmental Policy from of pollutants being dispersed into the submenu the atmosphere Alternations reserved 9 2006 www strongsat com STRONG Environmental Issues DIGITAL TV www strongsat com
26. list future steps of installation are described in 4 2 1 If your dish is aimed to another satellite or you have multiple dish installation then select Other future steps of installation are described in 4 2 2 4 2 1 After selection of Astra 1C 1E 19E or Hotbird 13E menu WIZARD ANTENNA ADJUSTMENT will appear Adjust your dish position in small steps until the signal strength and quality bars turn green or yellow Try to reach the maximum possible strength and quality level Once you are sure the signal cannot be improved fix the dish on this position and press OK on your remote control to start the channel search After finished search the first programmed channel will be displayed on screen 4 2 2 If you select Other satellite then menu Channel set up will be displayed on screen Using AW buttons select the Satellite item and press OK to display list of satellites Use A V buttons to select satellite of your choice and press OK Using A V buttons select Dish number item and using lt gt buttons select dish number Press OK to setup dish parameters n Dish setup menu configure settings of the LNB DiSEqC switch and Antenna mode Please refer to chapter 5 2 2 Dish set up for detailed information f you use fixed dish then press RED Autoscan button on remote control to start channel search Once channel search process is finished the receiver will switch to view mode and tune to channel number 1 fyou use dish mounted on DiSEqC 1 2 or GOT
27. ll information messages from CAM will be displayed on TV set screen Time settings If a broadcaster provides GMT you can set the time using GMT or set the time by yourself Ifthe GMT usage is ON then current time is set automatically If your broadcaster provides correct time offset your receiver will change summer winter time automatically If GMT Usage is set to OFF Set Data and Set Time item are displayed Time display select Stand by only to display time on front panel indicator only while receiver is in stand by mode Select Always to display time on front panel indicator not depending from receiver mode In this case channel number on front panel indicator would not be displayed Power On channel Use AY and OK buttons to select Last watched to awake receiver with the last watched channel or to select Fixed channel and define channel which should be displayed first every time when receiver awake from stand by Software update Select this option in order to update your receiver with the latest software version Software update service is available from satellites Astra 1C TE 1F at 19E and Hotbird 1 2 3 4 at 13E If your antenna is primed to Astra 1C 1E 1F at 19E then enter following parameters Frequency 12603 Polarity H Horizontal Symbol rate 22000 If your antenna is primed to Hotbird 1 2 3 4 at 13E then enter following parameters Frequency 12476 Polarity H Horizontal Symbol rate 27500
28. ly mount the product and use only the mounting devices recommended by the manufacturer m Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company m Refer to instruction pages for information on using the product with a battery CTIO Grounding Polarization If this product is used with a specified AC adapter the adaptermay be eguipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and then reinsert it If the plug still fails to fit contact an electrician and have the receptacle replaced m Protecting the Power Cord The power supply cord should be placed so it will not bewalked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords pai AA GENERAL PRECAUTIONS SAFETY PRECAUTIONS m Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and d
29. n enter to this menu and get the information about your CAM smart card subscription status manage maturity rating and PIN codes of the smart card Content of the menu depend from module type please refer to the user manual of your module 6 0 WATCHING TV AND LISTENING TO THE RADIO 6 1 Program Guide EPG EPG shows the program schedule for the current channel Availability of EPG depends from broadcast and may not be available for all channels In no menu state press EPG button the EPG Menu will appear Screen divided to 3 main parts at the left channel list at the right program schedule list and bottom part provide short program description with program start end time In channel list use AV buttons to choose the channel Use lt P to switch between channel list and program schedule In program schedule list Use AY buttons to choose program Use RED GREEN buttons to select previous next day of schedule Use lt P to switch between channel list and program schedule Use YELLOW button to display detailed program information Use BLUE button to programme timer for selected program In program details Use A V to scroll information in the window Use Exit to return to the list of programs 6 2 Zapping and information banners Zapping banner displayed automatically every time when you change channel in normal view mode It provides information about current channel list type satellite name time and date information channel numb
30. nel filtering by first letter of channel name m Zoom function for selected video region m Digital sound through coaxial output S PDIF m Display showing channel number or time m Separate power switch m Set up support for first time installation m Max 4 000 channels memory capacity for 60 satellites m 4 Favourite lists for TV and Radio programme m Quick and easy installation amp user friendly menu m Excellent Audio amp Video quality m Parental lock function for menu and selectable per channel m Teletext via OSD amp VBI m Supports DiSEqC 1 0 DiSEqC 1 2 and GOTO X m Electronic Programme Guide EPG for present following event information and up to 7 days for on screen programme information m Full multi lingual DVB subtitling and audio track support m Multi lingual support on screen menu OSD English German French Italian Spanish Russian Bulgarian Croatian Romanian Czech Hungarian Polish a Edit functions for TV or Radio programme name and satellite name m Future proof Software update via satellite OTA m Signal strength bar for digital transponders m Automatic network and manual channel scan options m Power on with last viewed channel m 8 Timers for recording and or sleep timer with 3 modes daily weekly once m 3 Games Boxman Tetris Snake m User friendly remote control with coloured function buttons m Low power consumption m Mosaic function 4 or 9 TV Channel in overview m Connections SAT IN
31. r to the input of your digital audio amplifier 6 RS 232 Serial Port This serial port can be used to connect your PC to your receiver to download new software versions to your receiver 7 Power ON OFF Switch 8 Power Cord Your receiver requires a current of 90 240 V AC Auto selectable 50 60Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet www strongsat com STRONG PART 1 o English DIGITAL TV 2 3 Remote Control Unit Turns the receiver On Off Mutes audio output of the receiver AV Toggle between TV and AV mode 0 9 Controls the numerical operation and especially changes program directly FAV Shows the current favourite program list TV R Switch between TV and RADIO modes MENU Shows the main menu INFO Shows information of the current channel EPG View the program guide in No menu state EXIT Exits from the menu or sub menu and cancels the progressing function if applicable gt Increases decreases the volume level in No menu state Change the setting values in specific Menu item AV Change the current program to the next previous program in NO menu state Moves the cursor to upward downward in Menu state V V Use to increase or decrease the receiver volume level P P Change the current program to the previous next program in NO menu state OK Activates the highlighted menu item Displays current channel list in No menu state SAT Shows the
32. rectly in the installation menu Check the signal strength with a spectrum analyzer and adjust your dish correctly The remote control The batteries of the remote does not work control are not inserted or exhausted Check whether the batteries are inserted correctly in your remote control Check the batteries and if exhausted replace the batteries in the remote control A 2 SPECIFICATIONS Demodulator Modulation QPSK Input Symbol Rate 2 45 Ms s SCPC amp MCPC signals from C amp KU band satellites Video Decoder Profile level MPEG 2 MP ML Input Rate Max 100 Mbits s Video Resolution 720 x 576 PAL 720 x 480 NTSC pixels Aspect Ratio 4 3 16 9 18 www strongsat com PART 1 English STRONG DIGITAL TV Audio Decoder ISO IEC 11172 LAYER I amp II Sampling rate 32 44 1 48 kHz Audio modes Stereo Mono Tuner Front End DVB S Input Frequency Range 950 2150 MHz RF Input Level 25 65 dBm LNB Power 13 5 18 V DC 5 Max 400 mA Overload protected DiSEqC Versions 1 0 amp 1 2 and GOTO X System and Memory CPU STi5105 200MHz Flash Memory 2 MBytes DDR SRAM 16 MBytes Connectors SAT IN SAT OUT 2 SCARTS TV RGB CVBS VCR CVBS S PDIF coaxial output Data Interface serial port RS 232 9 Pin D Sub Male type Separate power switch General Data Input Voltage Range 90 240 V AC 50 60 Hz Power consumption max 20 W Oper
33. t the requested satellite Connect a coax cable to your LNB and the other end directly to the SAT IN connector of your receiver Connecting multiple fixed dishes to your receiver using a DiSEqC 1 0 switch Fig 7 If you want to watch programs from more than one satellite For example from Astra and from HotBird it is advisable to use fixed dishes and a DiSEqC 1 0 switch Have your Dealer aim the dishes at the requested satellites and connect the LNB s with coax cables to the IN connectors of the DiSEqC 1 0 switch Connect the OUT connector of the DiSEqC 1 0 switch to the SAT IN connector at the back of your receiver Connecting a dish on a motorized positioner to your receiver Fig 8 Another possibility for watching programs from multiple satellites is by mounting a dish to a motorized DiSEqC 1 2 positioner Have your dealer mount the dish to the positioner set the correct angle of the elevation and let him set the center point for your positioner Connect the LNB with a coax cable to the LNB IN connector of the positioner and connect the OUT connector of the positioner to the SAT IN connector at the back of your receiver 3 4 Connecting to computer by serial cable for downloading software Connect the RS 232 connector on the back of your receiver to the Serial port of your computer using a serial cable Fig 9 Instructions how to download software can be found on our website www strongsat com support gt download However this receiver
34. t to move To save new order of the channels press Yellow Save or Blue Save amp Exit button 5 1 2 Add to Favourites Enter to this menu in order to prepare lists of your favourite channels Use A Y buttons to select channels of your choice Use lt P gt buttons to select favourite group where to add selected channel Press OK button to mark unmark channel to selected favourite group To rename Favourite group press RED button select group that you wish to rename and press OK 9 www strongsat com STRONG PART 1 o English DIGITAL TV On screen will appear keyboard To delete current name of the group select Backspace 4 symbol and press OK To enter new name use lt P A V and OK buttons Press RED button to save new name or press GREEN button to discard changes 5 1 3 Edit Channels In this menu you can edit channel name lock and delete channels Edit Press RED button to edit name of the channel On screen will appear keyboard To delete current name select Backspace 4 symbol and press OK To enter new name use lt P A Y and OK buttons Press RED button to save new name or press GREEN button to discard changes Channel name will be changed in all channel lists Lock Lock function can be used in order to block access to some channels Press GREEN button to lock unlock channel of your choice Locked channel will be marked by Lock symbol In order to watch locked channel you will need to enter PIN code
35. tion 8 4 2 Select Satellite 8 5 0 MAIN MENU 9 54 Channel Organiser 9 5 2 Installation 10 5 3 Timer 15 6 0 WATCHING TV AND LISTENING TO THE RADIO 16 6 1 Program Guide EPG 16 6 2 Zapping and information banners 16 6 3 Channel list 7 6 4 Selection of Audio Language 17 6 5 TELETEXT function 17 6 6 Subtitles function 17 A 1 TROUBLESHOOTING 18 A 2 SPECIFICATIONS 18 HOTLINES os20 400150 0 12 Min from German and Austrian wired line www strongsat com STRONG PART 1 o English DIGITAL TV 1 0 INTRODUCTION 1 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER m In a closed or poorly ventilated cabinet directly on top of or under any another equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or near any other equipment that generates heat to rain or intense moisture to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects such as loudspeakers transformers etc m Do not use a damaged power cord lt may cause a fire or an electrical shock Do not touch a power cord with wet hands It may cause an electric shock m Never open the cover It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards Your warranty will be void ifthe receiver has been opened m When the receiver is not used for a long period of time you should
Download Pdf Manuals
Related Search