High Definition 1080p Scaler
Contents
1. MA GTB HbD 1 20600 Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefentoolbox com support gefentoolbox com EX Cc o This product uses UL listed power supplies2. Cm 6 52 INFORMATION MENU SYSTEM SUMMARY Information Source Audio Source Color Space Input Input Resolution Output Output Resolution Version Software Version Menu 53 SPECIFICATIONS Maximum PIXEL 2 225 MHz Input DDC Sigal sassis rtp ete pp oer iet ttg 5 V TTL liput VIdeo Sigrial iier ier mde iac ge 1 2 V p p a 1 Type 19 pin female Output sans 1 Type A 19 pin female Audio Int rt rece t ce meta et 1 TOSLINK 1 S PDIF Atdi aer 1 TOSLINK 1 S PDIF 0 Serial PONG secca nette a NEUE DB 9 female IE 3 5 mm mini stereo jack P wet Supply nsnsi ten ederet teet oU o EU 5 V DC Locking Dimensions W X HX ertet eee 8 x 7 x 1 203mm x 178mm 25mm Shipping 4 Ibs 1 8 kg 54 WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 years from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current pri
3. stat Command The stat command enables disables terminal feedback Syntax stat Parameters None Notes Use the following syntax to return the current status setting Do not use a space between the question mark and the command stat Examples stat on STAT ON ir 2 IR 2 Stat off STAT OFF L 3 no feedback is displayed stat STAT OFF 42 MAIN MENU SYSTEM SUMMARY Exit Menu Color Output 4 OSD Audio 4 Information Y VIDEO MENU SYSTEM SUMMARY 44 VIDEO MENU SYSTEM SUMMARY Y gt 0 12 Y gt 45 Maintain Aspect Overscan Underscan Letterbox US PanScan US Y O9 Letterbox Full PanScan Ful Y Fo Ove Menu 5 T Q 46 COLOR MENU SYSTEM SUMMARY Color Menu Y 47 COLOR MENU SYSTEM SUMMARY 48 OUTPUT MENU SYSTEM SUMMARY Output Menu G 2 576i SVGA SXGA 2 720p50 1080i50 UXGA 1080p50 1080p 1 1080p 3 480 EXIT 480p 720p60 1080160 WXGA WSXGA WUXGA 0 250 1080p 2 2K60 NATIVE Y o 5 0 49 OSD MENU SYSTEM SUMMARY OSD Menu Y 9 50 OSD MENU SYSTEM SUMMARY gt 9 6 QA Oee gt 9 resp O 51 AUDIO MENU SYSTEM SUMMARY Menu Y Ove
4. Menu System on the screen Minimum value 1 Maximum value 100 Time Out Adjusts the amount of time in seconds before the OSD automatically closes Minimum value 1 Maximum value 100 Background Sets the transparency level of the OSD background Minimum value 0 Maximum value 8 Remote Channels Sets the remote channel for use with the IR Remote Control Unit Minimum value 0 Maximum value 3 WARNING If the selected Remote Channel in this menu and does not match the IR Channel set in the IR Remote Control Unit the unit will cease to respond to IR commands from the remote Exit Exits the OSD Menu and returns control to the Main Menu 15 MENU SYSTEM Audio Menu To access the Audio Menu press the Menu button Use the or buttons to highlight the Audio Menu icon Press the Menu button to enter the Audio Menu Use the or buttons to scroll through each of the parameters Press the Menu button to change the selected parameter Use the or buttons to increase or decrease the values Source Selects the audio input source HDMI Coaxial or Optical Sound Selects audio output option On or Mute Exit Exits the OSD Menu and returns control to the Main Menu Information Menu To access the Information Menu press the Menu button Use the or buttons to highlight the Information Menu icon Press the Menu button to enter the Information Menu The fol lowing information is displayed on the Information Men
5. THESE NOTES BEFORE INSTALLING OR OPERATING THE HIGH DEFINITION 1080P SCALER The High Definition 1080p Scaler will convert between digital and analog audio formats Compatible with all HDMI and DVI displays When used with a DVI to HDMI adapter FEATURES Features Scales digital video output up to 1080 Full HD and 6 Can be used as a down scaler to support lower resolution displays in multi display distribution systems Supports DVI D signals via appropriate adapters Supports standard and high bit rate audio and up to eight channels of LPCM audio via HDMI Supports up to two channels of LPCM audio via S PDIF and TOSLINK outputs High performance frame rate conversion engine Auto 3 2 pull down and 2 2 pull down detection and recovery Aspect Ratio Control Proprietary Advanced Color Engine Technology provides brilliant color intensified contrast and details vivid skin tones and sharp edges Selectable audio input HDMI TOSLINK or S PDIF Built in on screen display OSD menu controlled via an optional remote control sold separately RS 232 control Field upgradeable Wall mountable Package Includes 1 GefenToolBox High Definition 1080p Scaler 1 6 ft HDMI cable 1 5V DC Locking Power Supply 1 IR remote 1 User Manual PANEL LAYOUT Top Panel Definition Scaler Side Panel PANEL DESCRIPTIONS 1 Menu Navigation Buttons The M
6. between the question mark and the command contrast Examples contrast 30 contrast CONTRAST 30 22 RS 232 COMMANDS dflt Command The command resets the scaler to factory default settings Syntax Parameters None Example dflt 23 RS 232 COMMANDS green Command The green command sets the blue color component value of the output signal Syntax green Parameters param1 Number 1 100 Notes This command can only be used when clrtmp user See page 21 for details Use the following syntax to return the current value of the green component Do not space between the question mark and the command green Examples green 61 green GREEN 61 24 RS 232 COMMANDS help Command The help command displays the RS 232 command list The question mark must be included without a space as part of the command Syntax help Parameters None Example help PWR MUTE IN OUTPUT SIZE PICTUREMODE CONTRAST BRIGHTNESS 2 HUE SATURATION SHARPNESS CLRTMP RED GREEN BLUE OSDHPOS OSDVPOS OSDTMOUT 1 1 D OSDBKGND IR STAT DFLT INFO 25 RS 232 COMMANDS hue Command The hue command sets the hue of the output signal Syntax hue paraml Parameters param1 Number 1 100 Notes Use the followin
7. only available when the input signal is 480i or 480p Exit Exits the Video Menu and returns control to the Main Menu 12 MENU SYSTEM Color Menu To access the Color Menu press the Menu button Use the or buttons to highlight the Color Menu icon Press the Menu button to enter the Color Menu Use the or buttons to scroll through each of the parameters Press the Menu button to change the selected parameter Use the or buttons to increase or decrease the values Color Tone Normal Use for general content Warm Red shift RGB values for a warmer color Cool Blue shifts RGB values for a cooler video color User Allows individual adjustment of Red Green and Blue color components Red Adjusts the Red value by increments of 1 Minimum value 1 Maximum value 100 Green Adjusts the Green value by increments of 1 Minimum value 1 Maximum value 100 Blue Adjusts the Blue value by increments of 1 Minimum value 1 Maximum value 100 Exit Exits the Color Menu and returns control to the Main Menu 13 MENU SYSTEM Output Menu To access the Output Menu press the Menu button Use the or buttons to highlight the Output Menu icon Press the Menu button to enter the Output Menu Use the or but tons to select the desired output resolution Press the Enter button to enable the selected output resolution Use the or buttons to select the Exit option to exit the Option Menu and return control
8. to the Main Menu VGA 4801 576i WXGA SVGA 480p 576p WSXGA XGA 720p60 720p50 WUXGA SXGA 1080160 1080150 2K50 UXGA 1080p60 1080p50 2K60 1080p 1 1080p 2 1080p 3 Native Exit The Native option will select the native resolution of the connected display based on the EDID from the display The Output Menu also contains three frame rate conversion modes 1080p 1 1080p 24 50 60 No frame rate conversion 1080p 2 1080p 24 60 Converts all frame rates except 24 to 60 1080p 3 1080 24 50 Converts all frame rates except 24 to 50 NOTE resolution that is not supported by the display is selected then the on screen Menu will no longer be visible To correct this press the OUTPUT button on the IR Remote Control Unit and cycle through the output resolutions until a supported mode is displayed Exit Exits the Output Menu and returns control to the Main Menu 14 MENU SYSTEM OSD Menu To access the OSD Menu press the Menu button Use the or buttons to highlight the OSD Menu icon Press the Menu button to enter the OSD Menu Use the or buttons to scroll through each of the parameters Press the Menu button to change the selected parameter Use the or buttons to increase or decrease the values H Position Horizontal Position Adjusts the horizontal position on the Menu System on the screen Minimum value 1 Maximum value 100 V Position Vertical Position Adjusts the vertical position of the
9. Gefen High Definition 1080p Scaler GTB HD 1080PS GTB HD 1080PS BLK User Manual Coax Optical 77777 HDMI In Gefen 52 227 High Definition 1080p Scaler a www gefentoolbox com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday thru Friday Pacific Time Write To Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 www gefentoolbox com support gefentoolbox com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice High Definition 1080p Scaler is a trademark of Gefen LLC HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries 2011 Gefen LLC All rights reserved All trademarks are the property of their respective owners Rev 4 o won 10 11 11 13 14 15 16 16 17 18 43 44 48 49 50 52 53 54 55 CONTENTS Introduction Operation Notes Features Panel Layout Panel Descriptions IR Remote Control Layout Descriptions Installing the IR Remote Control Unit IR Remote Control Unit Configuration Connecting and Operating the High Defini
10. aler selected as an audio source at a time e NOTE Only one digital input S PDIF or TOSLINKG can be 3 Connect an HDMI cable from the HDMI Out port on the High Definition 1080p Scaler to an HDTV display 4 Connect the coax cable and or optical cable from S PDIF and or TOSLINK outputs to an A V receiver or other audio output device s 5 Connect the included 5 V DC locking power supply to the locking power connector on the Scaler then connect the AC power cord to an available electrical outlet Wiring Diagram for the GefenToolBox High Definition 1080p Scaler DIGITAL AUDIO TOSLINK CABLE n Gefen or DIGITAL AUDIO S PDIF CABLE RS 232 CABLE HDMI CABLE 7 Hi Def Source IR Extender HD Display Audio Receiver RS 232 Controller Optional GTB HD 1080PS 10 MENU SYSTEM Video Menu To access the Video Menu press the Menu button Use the or buttons to highlight the Video Menu icon Press the Menu button to enter the Video Menu Use the or buttons to scroll through each of the parameters Press the Menu button to change the selected parameter Use the or buttons to increase or decrease the values Picture Mode Preset and user configuration settings for different viewing scenarios Preset settings will not allow user adjustment Only the USER option will allow customized video settings The USER settings are saved Standard Useful for general content Movie usefu
11. ce of parts and labor in effect at the time of repair Such repairs are warranted for ninety 90 days from the day of reshipment to the Buyer This warranty is in lieu of all other warranties expressed or implied including without limitation any implied warranty or merchantability or fitness for any particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site 55 Rev 080P
12. d the command red Examples red 52 red RED 52 38 RS 232 COMMANDS saturation Command The saturation command sets the hue of the output signal Syntax saturation paraml Parameters param1 Number 1 100 Notes Use the following syntax to return the current saturation value Do not use a space between the question mark and the command saturation Examples saturation 74 saturation SATURATION 74 39 RS 232 COMMANDS sharpness Command The sharpness command sets the hue of the output signal Syntax sharpness Parameters param1 Number 1 100 Notes Use the following syntax to return the current sharpness value Do not use a space between the question mark and the command sharpness Examples sharpness 44 sharpness SHARPNESS 44 40 RS 232 COMMANDS size Command The size command sets the hue of the output signal Syntax Size paraml Parameters param1 String String Description full Full screen ma Maintain aspect ratio ovscan Overscan unscan Underscan ltrbox Letterbox U S ltrboxf Letterbox U S Full pnscan Pan and Scan pnscanf Pan and Scan Full Notes Use the following syntax to return the current size setting Do not use a space between the question mark and the command size Examples Size ltrbox Size SIZE LTRBOX 41 RS 232 COMMANDS
13. enu button is used to enable the on screen Menu System The and buttons are used to change values and navigate within the Menu System 2 HDMIIn Connect a Hi Def source device to this port using the included HDMI cable 3 Coaxin Connect a digital audio source using a coax cable to this S PDIF port 4 Optical In Connect a digital audio source using an optical cable to this TOSLINK port 5 RS 232 Serial Port This port is used for serial communication using an RS 232 control device Access to certain features are only available through the RS 232 interface 6 ExtIR Connect an IR Extender EXT RMT EXTIR to this port 7 HDMI Out Connect an HDTV display to this port 8 Coax Out Connect a coax cable from this S PDIF connector to an audio output device 9 Optical Out Connect an optical cable from this TOSLINK connector to an audio output device 10 5VDC Locking Power Connector Connect the included 5 V DC locking power supply to this receptacle 11 IR Window Receives IR commands from the optional IR Remote Control Unit RMT SR IR 12 Power Indicator This LED will glow bright red when power is applied to the unit IR REMOTE CONTROL LAYOUT DESCRIPTIONS RMT SR IR Remote Control Unit 7 e ew T BRA 2 3 1 INPUT OUTPUT POWER 11 4 5 8 10 12 6 9 D 7 Gefen lt Input Cycles through the available audio inputs HDMI Coaxial or Optical Output Cycles through the available output resolut
14. g syntax to return the current hue value Do not use a space between the question mark and the command hue Examples hue 40 hue HUE 40 26 RS 232 COMMANDS in Command The in command sets the audio input Syntax in paraml Parameters param1 String String Description hdmi Uses the HDMI input opti Uses the TOSLINK input coax Uses the S PDIF input Notes Use the following syntax to return the current audio input Do not use a space between the question mark and the command in Examples in opti in IN OPTI 27 RS 232 COMMANDS info Command The info command returns the current version of the scaler firmware Syntax info Parameters None Notes Use the following syntax to return the current audio input Do not use a space between the question mark and the command info Examples infos FW V2 03 HW 1 00 28 RS 232 COMMANDS ir Command The ir command sets the IR channel on the scaler The scaler must be set to the same IR channel as the IR remote control unit see page 9 in order to function correctly Syntax ir paraml Parameters param1 Number 1 4 Notes Use the following syntax to return the current audio channel of the scaler Do not use a space between the question mark and the command ir Examples ir 2 ir IR 2 29 RS 232 COMMANDS mute Command The mute co
15. he time out value for the OSD The specified value is in seconds Syntax osdhpos Parameters param1 Number 1 100 Notes Use the following syntax to return the current time out value Do not use a space between the question mark and the command osdtmout Examples osdtmout 90 osdtmout OSDTMOUT 90 33 RS 232 COMMANDS osdvpos Command The osdhpos command sets the vertical position of the OSD The default value is 50 vertically centered Values less than 50 will move the OSD toward the top of the screen Values greater than 50 will move the OSD toward the bottom of the screen Syntax osdvpos Parameters param1 Number 1 100 Notes Use the following syntax to return the current value Do not use a space between the question mark and the command osdvpos Examples osdvpos 42 osdvpos OSDVPOS 42 34 RS 232 COMMANDS output Command The output command sets the resolution of the output signal Syntax output paraml Parameters param1 String 080150 480i uxga 080160 080p 1 080p 2 080p 3 720p50 wxga 080p50 720p60 xga 080p60 native 2 50 svga 2K60 sxga Notes See page 14 for details on output resolutions Use the following syntax to return the current output resolution Do not use a space between the question mark and the command output Examples output 1080160 ou
16. inition 1080p Scaler allows you to scale one HDMI input to one HDMI output with up to 1080p Full HD and Deep Color This unit can vastly improve the quality of the image by outputting the video to the native resolution of the display bypassing the display s internal scaler Video can be manually scaled up and down in all resolutions up to 1080p Full HD This product can also be used to downscale making it ideal for distributing a Hi Def signal to multiple displays that do not support the same maximum resolutions in an HDMI distribu tion system while still showing maximum resolution on the higher definition displays It can also be used for DVI signals with appropriate adapters The GefenToolBox High Definition 1080p Scaler is conveniently wall mountable so it can be easily installed behind the display This Scaler offers RS 232 control and is field upgrade able How It Works Use the included HDMI cable to connect the source to the High Definition 1080p Scaler Connect the display to the Scaler using an HDMI cable Connect an optical and or coax audio cable from the source to the Scaler Another set of optical and or coax audio cables can be connected to an A V receiver or amplifier Connect the 5V DC locking power supply to the Scaler and connect the power cord to an available electrical outlet Select the audio input by using the On Screen Display with the front panel buttons or the included IR remote control OPERATION NOTES READ
17. ions See the Output Menu section on page 14 for a list of available output resolutions Power Turns the unit ON or OFF standby Exit Exits the current menu option and menu system Menu Displays the on screen Menu System Reset Resets the input and output resolutions to factory default Auto Adjust Sets the display for optimal resolution and aspect ratio based on the display s EDID information and the currently selected sources output resolution 10 11 12 IR REMOTE CONTROL DESCRIPTIONS Left Cursor Used to navigate to the left within the on screen Menu System Down Cursor Used to navigate downwards in the on screen Menu System Right Cursor Used to navigate to the right within the on screen Menu System Up Cursor Used to navigate up within the on screen Menu System OK Confirms the current selection This button performs the same function as the Menu button on the front panel of the Scaler INSTALLING THE IR REMOTE CONTROL UNIT Installing the IR Remote Control Battery 1 Remove the battery cover on the back of the IR Remote Control unit 2 Insert the included battery into the open battery slot The positive side of the battery should be facing up 3 Replace the battery cover The Remote Control unit ships with two batteries One battery is required for operation and the other battery is a spare Battery Slot WARNING Risk of explosion if battery is replaced by an incorrect
18. l for dimly lit environments Vivid useful for accentuating colors for a more vibrant image User user configuration settings Contrast Adjusts the Contrast by increments of 1 Minimum value 1 Maximum value 100 Brightness Adjusts the Brightness by increments of 1 Minimum value 1 Maximum value 100 Hue Adjusts the Hue by increments of 1 Minimum value 1 Maximum value 100 Saturation Adjusts the Saturation level by increments of 1 or 1 Minimum value 1 Maximum value 100 Sharpness Adjusts the sharpness in increments of 1 on a scale of 1 to 100 default 50 11 MENU SYSTEM Scale Sets the scaling adjustment Options are Full Overscan Underscan Letterbox U S Un derscan PanScan U S Underscan Letterbox Full and PanScan Full Full Stretches the image to fill the screen Maintain Aspect Maintains the aspect ratio of the output signal Overscan Stretches the image to fullscreen and just beyond the border of the display Underscan Stretches the image to fullscreen and just within the border of the screen Letterbox U S Underscan Stretches the image to 16 9 aspect ratio with underscan PanScan U S Underscan Stretches the image to 4 3 aspect ratio with underscan Letterbox Full Stretches the image to 16 9 aspect ratio without underscan PanScan Full Stretches the image to 4 3 aspect ratio without underscan NR Noise Reduction Reduces noise artifacts in the picture This option is
19. mmand enables disables audio muting of the output signal Syntax mute paraml Parameters param1 String String Description on Enables audio muting off Disables audio muting Notes Use the following syntax to return the current muting state Do not use a space between the question mark and the command mute Examples mute on mute MUTE ON 30 RS 232 COMMANDS osdbkgnd Command The osdbkgnd command sets the transparency value for the OSD background Setting the value to 100 will result in an opaque background Syntax osdbkgnd Parameters param1 Number 1 100 Notes Use the following syntax to return the current transparency value Do not use a space between the question mark and the command osdbkgnd Examples osdbkgnd 75 osdbkgnd OSDBKGND 75 31 RS 232 COMMANDS osdhpos Command The osdhpos command sets the horizontal position of the OSD The default value is 50 horizontally centered Values less than 50 will move the OSD to the left Values greater than 50 will move the OSD to the right Syntax osdhpos Parameters param1 Number 1 100 Notes Use the following syntax to return the current value Do not use a space between the question mark and the command osdhpos Examples osdhpos 75 osdhpos OSDHPOS 75 32 RS 232 COMMANDS osdtmout Command The osdtmout command sets t
20. p user See page 21 for details Use the following syntax to return the current value of the blue component Do not use a space between the question mark and the command blue Examples blue 65 blue BLUE 65 19 RS 232 COMMANDS brightness Command The brightness command sets the brightness level of the output signal Syntax brightness paraml Parameters param1 Number 1 100 Notes Use the following syntax to return the current brightness value Do not use a space between the question mark and the command brightness Examples brightness 70 brightness BRIGHTNESS 70 20 RS 232 COMMANDS Command The brightness command sets the color temperature of the output signal Syntax clrtmp Parameters param1 String String Description nrml Normal color temperature warm Red values are increased cool Blue values are increased user User settings Notes Use the following syntax to return the current color temperature value Do not use a space between the question mark and the command clrtmp Examples clrtmp warm clrtmp CLRTMP WARM 21 RS 232 COMMANDS contrast Command The contrast command sets the contrast of the output signal Syntax contrast paraml Parameters param1 Number 1 100 Notes Use the following syntax to return the current contrast value Do not use a space
21. tion 1080p Scaler Wiring Diagram Menu System Video Menu Color Menu Output Menu OSD Menu Audio Menu Information Menu RS 232 Serial Control Interface RS 232 Serial Commands Main Menu System Summary Video Menu System Summary Color Menu System Summary Output Menu System Summary OSD Menu System Summary Audio Menu System Summary Information Menu System Summary Specifications Warranty INTRODUCTION Congratulations on your purchase of the GefenToolBox High Definition 1080p Scaler Your complete satisfaction is very important to us Gefen We specialize in total integration for your home theater while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware We invite you to explore our distinct product line and hope you find your solutions Don t see what you are looking for here Please call us so we can better assist you with your particular needs Why GefenToolBox The GefenToolBox line offers portable and easy to install solutions for common A V system integration setups using HDMI connectivity GefenToolBox products are wall mountable and small in size GefenToolBox products are easily transported in the field and are ready for immediate and simple installations in working environments These products come fin ished in glossy black or ivory to blend in with either a white wall of black cabinet The GefenToolBox High Definition 1080p Scaler The GefenToolBox High Def
22. tput OUTPUT 1080160 35 RS 232 COMMANDS picturemode Command The picturemode command sets the resolution of the output signal Syntax picturemode Parameters param1 String String Description standard Standard viewing movie For dimly lit environments vivid Vibrant colors user User settings Notes See page 11 for more information on picture mode settings Use the following syntax to return the current picture mode setting Do not use a space between the question mark and the command picturemode Examples picturemode vivid picturemode PICTUREMODE VIVID 36 RS 232 COMMANDS pwr Command The pwr command sets the resolution of the output signal Syntax pwr paraml Parameters param1 String String Description on Power on the scaler off Power off the scaler Notes Use the following syntax to return the current power state Do not use a space between the question mark and the command pwr Examples pwr off pwr POWER OFF 37 RS 232 COMMANDS red Command The red command sets the red color component value of the output signal Syntax red Parameters param1 Number 1 100 Notes This command can only be used when clrtmp user See page 21 for details Use the following syntax to return the current value of the red component Do not use a space between the question mark an
23. type Dispose of used batteries according to the instructions IR REMOTE CONTROL UNIT CONFIGURATION Setting the IR Remote Control Channel In the event that IR commands from other remote controls interfere with the supplied IR Remote Control unit changing the IR channel on the IR Remote Control unit will fix the problem The IR Remote Control unit has a bank of DIP switches used for setting the IR channel The DIP switch bank is located underneath the battery cover Channel 0 Channel 1 Default 1 2 1 2 Channel 2 Channel 3 1 2 1 2 Exposed DIP switch bank between the battery slots It is important that the IR channel on the Remote Control unit matches the IR channel set on the GefenToolBox High Definition 1080p Scaler For example if both DIP switches on the IR Remote Control unit are set to IR channel 0 both DIP switches down then the High Definition 1080p Scaler must also be set to IR channel 0 Refer to page 15 on changing the IR channel on the High Definition 1080p Scaler CONNECTING AND OPERATING THE HIGH DEFINITION 1080P SCALER How to Connect the High Definition 1080p Scaler 1 Connect the included HDMI cable from the Hi Def source to the HDMI In port on the High Definition 1080p Scaler 2 Connect a coax cable from a Digital audio source to the S PDIF input connector An Optical cable can also be connected from the digital audio source to the TOSLINK input connector on the High Definition 1080p Sc
24. u screen Audio Input Source and the Color Space Input Resolution Output Resolution Firmware Version 16 RS 232 SERIAL CONTROL INTERFACE RS 232 Interface 5 4 3 2 1 RS 232 Controller Matrix o RB Only TXD RXD and GND are used RS232 Settings AUS RERO c 19200 8 Parity bits None a 1 Flow Control IMPORTANT When sending RS 232 commands a carriage return must be included at the end of the command A space must be included between the command and the parameter 17 Command blue brightness contrast help hue RS 232 COMMANDS Sets the blue color component value of the output signal Sets the brightness level of the output signal Sets the color temperature of the output signal Sets the contrast level of the output signal Resets the scaler to default settings Sets the green color component value of the output signal Displays the command list Sets the picture hue of the output signal Changes the audio input Fait cartes four Poweron Power thesealer Sets the red color component value of the output signal CEE 18 RS 232 COMMANDS blue Command The blue command sets the blue color component value of the output signal Syntax blue parami Parameters param1 Number 1 100 Notes This command can only be used when clrtm
Download Pdf Manuals
Related Search