USER MANUAL
Contents
1. m ONE VISION ONE MISSION TOLEDO 301 WWW AZZATEH COM ME M E 1 7 VY AZZA USA Technology Ltd 670 Endeavor Circle Brea CA 92821 USA Phone 7 14 990 5625 Fax 714 990 5912 www azzatek com SPECIFICATIONS TOLEDO Sui Internal 2 5 Drive Bays 3 2 x2 5 SSD HDD Drive Bays Dimensions HxWxD 19 5 x 9 1 x 20 1 Feature 000000 DD Te zz 77 Part List 1 Front Panel 1X120mm LED Fan 9 2 5 SSD Holder 2 Foot Support 10 3 5 HDD Holder 3 3 5HDD not included 11 5 25 Device Lock 4 Left Panel 1X250mm LED Fan 12 Top Panel 9 Left Side Panel 15 5 25 Drive bay Mesh Cover 6 Rear 1X120mm Fan 14 3 5 Drive bay Mesh Cover 7 Top 2X120mm Fans not included 15 Front Panel 8 Right Side Panel Aircooling System TOLEDO Sui Rear Fan Exhaust Fan Hole For Water 120X120X25mm Fan Cooler Radiator Side Fan intake Front Fan Intake 250x250x30mm 120X120X25mm Blue LED Fan Blue LED Fan Assembly kit l L i u 2PCS screw for dust shield speaker power supply screws 9PCS screw for PCB 4PCS Screw for 2 5 SSD 2PCS screw for plastic boss 4PCS APCS releasible Cable Tie Diagram INSTALLATION INSTRUCTION TOLEDO JU 1 Open The side Panel 1 Remove the locking screws on left hand side of the case towards the2. back of the case 2 Slide out the side panel 2 Remove The Front Panel and Top Panel 1 Hold the front panel bv placing one hand on top of the case and one hand at the bottom 2 Pull the bottom part front panel towards vou a j m NIE c ai ir 1 Remove the screws which locked the top panel from inside the case with a screwdriver 2 Hold the top panel with both hands and push toward vou 3 Then take off the top panel 3 Install Power Supply 1 Place the power supply towards the bottom of the case 2 Tighten the power supply with screw 3 This case is designed in a way that the power supply unit can be installed either facing up or down 4 5 25 Device and 5 5 Device Installation j d 1 Unlock 5 25 device lock bv pulling the nods with both of vour hands Push the nods then the lock door will be released 2 Take off the front panel with the arrows shown on the diagram 3 Push the 5 25 or the 3 5 mesh cover front from the inside out 4 Put back the front panel and place the 5 25 or the 3 5 device into the respective drive slot 5 Slide the 5 25 device into the respective bav and make sure the screw holes on the device matches with the marking on the 5 25 device cage 6 Closed the 5 25 device door and then push the lock again with both hands 7 For 3 5 device vou need to secured it with screws 5 3 5 HD Device Installation 1 Take the 3 5 HD holder out from the HD cage 2 Place
3. ition PORTAL RED BLACK AUD GND PORT1 R GREEN BLACK BLACK PRESENCE PORT2 R YELLOW BROWN SENSE1 RETURN SENSE SEND PURPLE KEY PORT2 L BLUE ORANGE SENSE2 RETURN AUDIO Connector AC 97 Pin Definition Front Right Channel Audio Signal MIC IN RED BLACK GROUND Front Audio Ground MIC POWER GREEN NC Front Left Channel Audio Signal R OUT YELLOW YELLOW R RET Rear Right Channel Audio Signal Front Microphone input Signal NC KEY Front Microphone Power L OUT BLUE BLUE L RET Rear Left Channel Audio Signal Remark 1 USB and Audio connectors have foolproof design can only be inserted in one direction 2 LED connectors have electrically positive and negative poles
4. your 3 5 HD inside the HD holder 3 Push the 3 5 HD holder back to HD cage 6 2 5 SSD 8 HD Device Installation Option 1 1 Put the 2 5 device on the 3 5 HD holder 2 Secured the 2 5 device with screw 3 Push the 3 5 HD holder back to HD cage Option 2 This holder can put two 2 5 SDD devices 1 Take off the 2 5 device holder from 3 5 device 2 Put the 2 5 device in this holder Total you can put 2 2 5 device in this holder one on bottom one on top 3 Secured the 2 5 device with screws then put this 2 5 device holder back to 3 5 HD holder and secured it with screws 4 Push the 3 5 HD holder back to HD cage 7 Top Fans Installation Option 1 Option 2 Take off the top panel and placed the fans Place the fans beneath the top panel and on top of the case and screw the fans from screw the fans from outside the case the inside the case Closed the side panel along with those screws that we ve remove from Please refer to your motherboard user manual on the sections of USB connector and Audio Connector Please verify the pin definition before connecting the connectors to the motherboard USB Connector Pin Definition Wire Color GROUND BLACK USB Ground GREEN USB DATA RED USB Power 5V DO WHITE USB DATA D VCC D VCC GROUND BLACK USBO Ground IED GREEN USB DATA WHITE USB DATA vec RED USB Power 5V AUDIO Connector HD Audio Pin Defin
Download Pdf Manuals
Related Search