MCR-042 - Yamaha Downloads
Contents
1. iPod dock Connect your iPod here 1 P 3 6 7 Be sure to use a dock adaptor that is compatible with your iPod P 3 Front panel display The clock and other information is displayed here Disc slot Insert a CD here P 9 AA Power Press to turn the system on off USB port Connect your USB device iPod iPhone iPad here P 3 10 Q Headphone jack Connect headphones here Front panel display BESO a a PUE P oii MON o SAT SI 6 Q Alarm time This indicates the alarm time P 21 Repeat shuffle indicator Displays the playback mode P 8 10 Secondary indicator Turns on if a secondary station is playing when you listen to a DAB station Multi function indicator Displays various information including the clock time information about the currently playing track and the frequency of the radio station 4 En SOURCE Switch the audio source to be played Pressing this repeatedly will change the selection in the following order CD gt iPod gt USB gt DAB gt FM gt AUX gt back to CD VOLUME knob Adjust the volume Audio control buttons Use these to operate the iPod CD USB device Pil Play Pause a Stop k lt 4 p gt 1 Skip Search backward forward press and hold down PRESET lt gt Use these buttons to select a radio station preset that you ve stored P 17 amp Eject button Eject the CD2. You are attempting to insert a disc that cannot be used by this unit Use a disc supported by the unit 1 P 26 Some button operations do not work The disc loaded into the unit may not be compatible Use a disc supported by the unit P 26 Playback does not start immediately after pressing PII stops immediately The disc may be dirty Wipe the disc clean P 26 The disc loaded into the unit may not be compatible Use a disc supported by the unit P 26 If the unit was moved from a cold to warm place condensation may have formed on the disc reading lens Wait for an hour or two until the unit adjusts to the room temperature and try again The front panel display indicates no operation and a disc cannot be inserted or unloaded The option menu is displayed Alternatively the alarm is playing Press OPTION to exit the option menu Alternatively press ALARM to stop the alarm When you insert a disk the front panel display indicates CD No Disc or CD Unknown The disc loaded into the unit may not be compatible Use a disc supported by the unit P 26 The disc may be dirty Wipe the disc clean P 26 The disc does not contain playable files Use a disc contains playable files P 26 The disc was inserted upside down Insert the disc with the label facing upward USB device playback Pro
3. DAB FM antenna Speaker cable Dock cover 1 5 m 4 9 x 2 How to use the remote control Yanan While pushing the release tab in direction slide out the battery holder in direction Replacing the battery in the remote control Within 6 m 20 CR2032 type Lithium battery Battery insulation sheet Remove before using CONNECTIONS Connecting the speakers and antenna Connect the speakers and antenna If you use a commercially available outdoor antenna instead of the supplied antenna reception may be better If DAB FM reception is poor try changing the height or direction or placement of the antenna to find a location that has better reception Do not connect this unit s power cable until you ve finished connecting all cables Speakers e You must peel off the insulation covering from the tip of the speaker cable to expose the conductor Twist the bare wires e Check the connections make sure that left and right L R and polarity red tightly so the individual black are connected correctly If connections are incorrect the sound will be strands are not splayed unnatural and the low frequencies may be insufficient There might not be any sound at all if connections are incorrect e Take care that the conductors of the speaker cable do not touch each other and that the conductors do not touch any other metal part Such conditions can damage this unit or the s
4. YAMAHA iPod iPhone Pad Micro Component System MCR 042 OWNER S MANUAL CAUTION READ THIS BEFORE OPERATING YOUR UNIT 1 To assure the finest performance please read this manual carefully Keep it in a safe place for future reference 2 Install this unit in a well ventilated cool dry clean place away from direct sunlight heat sources vibration dust moisture and cold For proper ventilation allow the following minimum clearances Top 15 cm 6 in Rear 10 cm 4 in Sides 10 cm 4 in 3 Locate this unit away from other electrical appliances motors or transformers to avoid humming sounds 4 Do not expose this unit to sudden temperature changes from cold to hot and do not locate this unit in an environment with high humidity i e a room with a humidifier to prevent condensation inside this unit which may cause an electrical shock fire damage to this unit and or personal injury 5 Avoid installing this unit where foreign object may fall onto this unit and or this unit may be exposed to liquid dripping or splashing On the top of this unit do not place Other components as they may cause damage and or discoloration on the surface of this unit Burning objects i e candles as they may cause fire damage to this unit and or personal injury Containers with liquid in them as they may fall and liquid may cause electr
5. ose select one of the following w select one of the following S we playback modes gt lt w playback modes No display Repeat mode off No display Shuffle mode off GS 1 track DG All tracks within the folder data CD G All tracks within the folder data CD USB device only USB device only DG ALL All tracks Alt All tracks 10 En LISTENING TO DAB STATIONS DAB Digital Audio Broadcasting and DAB use digital signals for clearer sound and more stable reception compared to analog signals DAB is based on the original DAB standard but uses a more efficient audio codec DAB and DAB are broadcast in blocks of data called ensembles containing up to several radio stations that are simultaneously broadcast DAB and DAB can also include an extensive amount of text information enabling you to select a station by name Other information such as the ensemble name or the status of the digital signal can be displayed on the front panel display DAB described in this manual may also refer to DAB Preparing for DAB reception Before tuning into DAB stations an initial scan must be performed When you select the DAB for the first time the initial scan is performed automatically To listen to a DAB station connect the antenna as described in Connecting the speakers and antenna P 2 Press the RADIO source button to switch the audio source to DAB The initial scan starts During the scan the
6. DAB coverage in your area Check with your dealer or WorldDMB Online at http www worlddab org for a listing of the DAB coverage in your area The DAB station reception is weak The DAB signals are too weak There is noise interference e g hiss crackle or jitter The antenna needs to be repositioned The DAB signals are too weak Change the height direction or placement of the antenna The DAB station information does not appear or is inaccurate The DAB station may be temporarily out of service or the DAB station information is not provided by the DAB broadcaster Contact the DAB broadcaster FM reception Problem Cause Solution Too much noise The antenna may be connected improperly Make sure the antenna is connected properly P 2 or use a commercially available outdoor antenna The antenna is too close to the unit or to an electronic device Position the antenna as far away as possible from the unit or the electronic device Too much noise during stereo broadcast The radio station you selected may be far from your area or the radio wave reception is weak in your area Try manual tuning to improve the signal quality gt P 15 or use a commercially available outdoor antenna Even with an outdoor antenna radio wave reception is weak Sound is distorted Multipath reflection or other radio interferences may have oc
7. Your iPod will be recharged while it is connected to the dock However if USB is selected as the audio source the iPod will not be recharged yamana e Your iPod can also play back music and charge while connected to the USB port To do this select USB as the audio source P 10 e You can remove the iPod during playback iPad Connect your iPad to the front panel USB port For details on compatible iPad models refer to SPECIFICATIONS P 27 Make sure to use a Dock Connector to USB Cable that is supplied with your iPad C2 e When you turn the system on and set the audio source to USB the iPad connected to this unit will be recharged e You can remove the iPad during playback USB device Connect your USB device to the USB port on the front panel For details on playable files refer to NOTES ON DISCS AND USB DEVICES P 26 Stop playback before disconnecting the USB device Pe When you turn on the system and set the audio source to USB the USB device connected to this unit will be recharged SS YAMAHA Q Cm External devices Using a commercially available 3 5 mm mini plug cable connect your external device to the AUX jack on the rear panel of this unit Rear panel i LA 3 En NAMES OF PARTS AND THEIR FUNCTIONS Top panel Front panel gt M E z gt YAMAHA
8. contact with clothing etc Clean the battery compartment thoroughly before installing new batteries If you plan not to use the unit for a long period of time remove the batteries from the unit Otherwise the batteries will wear out possibly resulting in a leakage of battery liquid that may damage the unit Do not throw away batteries with general house waste Dispose of them correctly in accordance with your local regulations 22 Excessive sound pressure from earphones and headphones can cause hearing loss This unit is not disconnected from the AC power source as long as it is connected to the wall outlet even if this unit itself is turned off by In this state this unit is designed to consume a very small quantity of power WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type There is a chance that placing this unit too close to a CRT based Braun tube TV set might impair picture color Should this happen move this unit away from the TV set LASER Type Semiconductor laser GaAS GaAlAs Wave length 790 nm Output Power 7mW CONTENTS CONNECTIONS vivisicssvicscccisiesscesesecdeaccnesacersvancerssseesxess Connecting the speakers and antenna Connecting the power cable Other CONNECTIONS csscsscste
9. degree of progress is displayed on the front panel display When scan is completed the number of receivable DAB stations appear on the front panel display If the initial scan is performed stored DAB station information and preset DAB stations are cleared Performing the initial scan again Option menu El Press OPTION w The option menu will appear nE mi o HPress a v to select DAB INIT SCAN and then press ENTER The display will indicate Press ENTER S D El Press ENTER The initial scan starts 11 n Selecting DAB stations El Press the RADIO source button to switch the audio source to DAB E Press TUNING lt gt gt to select the DAB station While receiving DAB DAB station information is shown on the front panel display If the unit does not receive a DAB signal Off Air is displayed instead of the DAB station name Secondary indicator Some stations have sub secondary stations If a secondary station is playing the secondary indicator is displayed ms gt a i _ reser Signal strength indicator Shows current signal strength DAB station name Preset number SS Display information remote control only If you press DISPLAY on the remote control the information shown on the front a le C panel display will be switched in the following order STATION LABEL PRESET NUMBER v DLS Dynam
10. played at the set time Source playback begins to fade in 3 SOURCE BEEP minutes before the set time and the volume gradually increases to the set volume Then at the set time the beep sound is activated The selected audio source is played at the set time The volume fades in gradually and increases to the set SOURCE volume BEEP The beep sound is played at the set time Various audio sources You can choose from iPod audio CD data CD USB device or DAB FM The following playback methods can also be selected depending on the audio source Source maypa Function A specific playlist stored on the iPod is played back repeatedly To play a playlist create a playlist with the name ALARM Yamaha DTA in advance Playlist k When entering the playlist name use single byte spaces to separate words and enter iPod single byte characters taking care that uppercase lowercase letters are used correctly If the ALARM Yamaha DTA playlist cannot be found within the iPod the unit Resume resumes play from the last track you played Audio CD Selected track The selected ae is played repeatedly Resume The track you listened to last time is played back Fol The selected folder is played tedly Data CD USB device E der e selecte er is playe repeate y Resume The track you listened to last time is played back DAB FM Preset station The selected preset station i played Resume T
11. time 6 ALARM SET Sets the alarm 21 Default setting Procedure for settings El Press OPTION The option menu will appear E Press a v to select the menu item that you want to set and then press ENTER EiPress a v to edit the setting and then press ENTER to confirm the setting If you want to continue making other settings repeat the procedure from step A E Press OPTION to exit the option menu re If you decide to cancel without changing the setting press OPTION before confirming the change Using the sleep timer When the specified time has elapsed the system will turn off automatically Press SNOOZE SLEEP repeatedly to specify the time after which the system will turn off You can specify 30 60 90 120 or OFF When you select a time the sleep timer is turned on and the sleep indicator H is shown in the front panel display i If you press SNOOZE SLEEP while the sleep timer is activated the sleep timer setting will be canceled Press repeatedly CuO O OOGO 19 En USEFUL FUNCTIONS Using the alarm function The unit includes an alarm function IntelliAlarm that plays back audio sources or a set of beep internal alarm sound at the set time using a variety of different methods The alarm function has the following features 3 types of alarms Select from 3 alarm types combining music and beep sounds The selected audio source and the beep sound are
12. AU FAISCEAU AVEEA71102A Important Notice Guarantee Information for customers in EEA and Switzerland English country For detailed guarantee information about this Yamaha product and Pan EEA and Switzerland warranty service please either visit the website address below Printable file is available at our website or contact the Yamaha representative office for your EEA European Economic Area http europe yamaha com warranty YAMAHA ded o 2 2012 Yamaha Corporation Re q YAMAHA CORPORATION Printed in Malaysia ZD94920 1
13. B port To do this select USB as the audio source P 10 El Press the iPod source button to switch the 1 audio source to iPod OC F Set your iPod in the iPod dock 1 P 3 Ej Play the iPod a C Playback can be controlled with either the remote control iPod or the front panel on this unit P 4 5 If you ve selected an audio source other than USB performing A the following operations will automatically switch the audio source to iPod and start playback even if the system is turned off Connect your iPod in the playback state to the iPod dock Play back the connected iPod Dock adaptor e If USB is selected as the audio source the iPod will not be P 3 recharged e You can remove the iPod during playback If iPod is selected as the audio source this unit will automatically turn the system off when 60 minutes have elapsed without a device being connected to the iPod dock nor any operation performed iPod menu operations remote control only You can use the remote control to operate your iPod MENU Switch menu items Return to the previous menu FOLDER GUI Teun A V Move between items in the menu ENTER Confirm Display information remote control only If you press DISPLAY on the remote control while a song is playing or paused the information shown on the front panel display will be switched in the following order Elapsed song playback
14. D USB DEVICES P 26 Listening to a CD 1 El Press the CD source button to switch the De audio source to CD aum Ifa CD is already inserted playback will start Cou C Bie CD into the 1 slot G Cor ayback starts automatically Playback can be controlled with either the remote control or the front panel on this unit P 4 5 Insert the CD with the label side facing upward i a gt YAMAHA lt gt YAMAHA ois Folders and files on a data CD are played in alphabetical order Skipping folders remote control only TEE While a data CD is playing you can use the remote control s FOLDER A V o ew buttons to select the folder o Display information remote control only The folder number only for a data CD or the song file number is shown for O J cy several seconds when starting playback or skipping tracks If you press DISPLAY on the remote control while a song is playing or paused the information shown on the front panel display will be switched in the following order Audio CD Data CD Elapsed song playback time Elapsed song playback time Remaining song playback time Song name Song name Album name Album name Artist name Artist name File name Folder name Shown only if this data is included in the song 9 En LISTENING TO CD AND USB DEVICES Listening to a USB device El Press the USB source button to switch the a audio so
15. ESHOOTING section on common operating errors before concluding that this unit is faulty 17 Before moving this unit press 0 to set the system to off and disconnect the AC power plug from the wall outlet 18 Condensation will form when the surrounding temperature changes suddenly Disconnect the power cable from the outlet then leave this unit alone 19 When using this unit for a long time this unit may become warm Turn the system off then leave this unit alone for cooling 20 Install this unit near the wall outlet and where the AC power plug can be reached easily 21 The batteries shall not be exposed to excessive heat such as sunshine fire or the like When you dispose of batteries follow your regional regulations Keep the batteries in a location out of reach of children Batteries can be dangerous if a child were to put in his or her mouth If the batteries grow old the effective operation range of the remote control decreases considerably If this happens replace the batteries with new one as soon as possible Do not use old batteries together with new ones Do not use different types of batteries such as alkaline and manganese batteries together Read the packaging carefully as these different types of batteries may have the same shape and color Exhausted batteries may leak If the batteries have leaked dispose of them immediately Avoid touching the leaked material or letting it come into
16. NG POPP 23 Preparing for DAB reception seseeesserererreerrereene 11 NOTES ON DISCS AND USB DEVICES 26 Selecting DAB stations 0 0 c ccccsscsscessesessssesestesesens 42 SPECIFICATIONS wis sccscesstcsssnccacsssscsenscrssscesessesvesnsees 27 Presetting DAB stations remote control only 13 Features e Play back music from external devices such as your iPod iPhone iPad audio data CDs USB devices or external devices via the AUX jack and listen to the DAB FM e Use your favorite music or a beep tone as an alarm When the set time arrives the music you select is played at the volume that you specify giving you the ideal start to your day IntelliAlarm function e You can take advantage of more sophisticated alarm functionality by using the free DTA Controller application for the iPod touch iPhone iPad P 20 e You can easily store and recall 30 of your favorite DAB FM stations e Bass middle and treble can be adjusted to your taste About this manual e References to the iPod appearing in this manual also include the iPhone Ifan operation can be performed using either the buttons on the unit itself or from the remote control the explanation will focus on operation using the remote control G indicates precautions for use of the unit and its feature limitations 3 indicates supplementary explanations for better use Supplied accessories Remote control uses a CR2032 type Lithium battery
17. Press ALARM or 0 re e You can also stop the alarm by holding down SNOOZE SLEEP e If you don t stop the alarm it will stop automatically after 60 minutes and the system will turn off The alarm setting will be saved even if the alarm is turned off If the alarm is turned on again by pressing ALARM the alarm will sound with the previous alarm settings ta a 22 En TROUBLESHOOTING If there is a problem with the unit check the following list first If you cannot resolve the problem with the suggested solutions or if the problem is not listed below turn off and unplug the system and consult the nearest authorized Yamaha dealer or service center General Problem Cause Solution The speakers make no sound The volume might be set to the minimum level or muted Adjust the volume level The source may be incorrect Select the correct source The speakers may not be connected securely Check the connections P 2 Headphones are connected Remove the headphones The volume of a connected external device is not loud enough Raise the volume of the external device Sound suddenly turns off The sleep timer may be set P 19 Turn the system on and play the source again The automatic system off function may have operated When the time specified for AUTO POWER OFF in the option menu has elapsed P 19 or when 60 minutes have elapsed without any
18. USB device in repeat shuffle mode P 8 10 a TUNING lt gt Tune the DAB FM P 15 16 2 PRESET lt gt iPod control buttons Select a DAB FM station that you stored P 16 17 MEMORY z P4 Store a DAB FM station P 16 FOLDER MUTE Mute or unmute the sound VOLUME Adjust the volume 2 A DISPLAY cA Switch the information shown in the front panel display P 6 7 9 10 15 10 Skip ten songs ahead of the currently playing song When playing a data CD or a USB device this button skips ten songs within the current folder OPTION Display the option menu P 19 5 En ADJUSTING THE CLOCK OPTION MENU You ll use the option menu P 19 to set this unit s date and time To copy the time from your iPod a Dock adaptor P 3 lt gt YAMAHA The clock is shown as below 24 hour Jan Mar Apr January February March April Jul Aug Sep Oct October November December July August September 6 En El Press OPTION The option menu will appear Press a v to select CLOCK SET and then press ENTER The display will indicate CLOCK YEAR and the numerical value to be set will blink E Set your iPod in the iPod dock 1 P 3 The time will be copied from your iPod to this unit Press ENTER to confirm the item
19. blem Cause Solution MP3 WMaA file in the USB device does not play The USB device is not recognized Turn the system off and reconnect the USB device to the unit If the solutions above do not resolve the problem the USB device is not playable on the unit P 26 The USB device does not contain playable files Use a USB device contains playable files 1 P 26 When you connect a USB device the front panel display indicates USB OverCurrent and then the front panel display goes blank An incompatible USB device was connected to the unit Alternatively the USB device is not connect firmly to the unit Turn the system off and reconnect the USB device to the unit If it does not resolve the problem the USB device is not playable on the unit P 26 24 En TROUBLESHOOTING DAB reception Problem Cause Solution Cannot tune into any DAB stations The initial scan operations were not performed Perform the initial scan operations P 11 There is no DAB coverage in your area Check with your dealer or WorldDMB Online at http www worlddab org for a listing of the DAB coverage in your area The DAB signals are too weak The initial scan operations are not successful and Not Found appears on the front panel display The DAB signals are too weak Change the height direction or placement of the antenna There is no
20. cannot be operated while the option menu t P 19 is displayed Remote control signal receiver Make sure that this sensor is not obstructed P 1 Sleep indicator Turns on if the sleep timer has been set P 19 Alarm indicator Turns on if the alarm has been set P 21 8 Weekly alarm indicator Shows alarm information specified using the free DTA Controller application for the iPod touch iPhone iPad P 20 NAMES OF PARTS AND THEIR FUNCTIONS Remote control Q Remote control signal transmitter DH Power Press to turn the system on off 3 SNOOZE SLEEP Set the sleep timer or switch the alarm to snooze mode P 19 22 ALARM Switches the alarm on off P 22 Source buttons Switch the audio source to be played If you press one of these while the system is off the system will automatically turn on Press RADIO repeatedly to switch between DAB FM MENU Switch the iPod menu item Return to the previous menu P 7 FOLDER a v Switch the playback folder when playing music on data CDs or USB devices P 9 10 Select items or edit numerical values P 7 19 ENTER Confirm a selected item or value Audio control buttons Use these to operate the iPod CD USB device a Stop VOLUME Pil Play Pause K lt p gt 1 Skip Search backward forward press and hold down c Repeat gt Shuffle Play music on an iPod CD or
21. ck VOLUME Specifies the volume 5 60 of the alarm Ei Complete the settings When you set the VOLUME for item 6 the display will indicate Completed and your settings will be confirmed The alarm will be turned on and the alarm indicator will light If you press OPTION or turn off the system while making alarm settings the settings will be cancelled 21 En USEFUL FUNCTIONS Switching the alarm on off Press ALARM to turn the alarm on off When the alarm is on the alarm indicator will light and the alarm time will be shown If you press ALARM again the alarm indicator and the alarm will turn off If the Option menu item POWER SAVING is set to ECO the C alarm will not function P 19 eel Operations while the alarm sound is playing When the set time arrives the selected alarm sound will play During playback the following operations are available To pause the alarm Snooze Press SNOOZE SLEEP Snooze will stop the alarm and play it again 5 minutes later SNOOZE SLEEP 32 If SOURCE BEEP is set as the alarm type you can press SNOOZE SLEEP once to stop the beep sound and twice to stop the audio source Five minutes after the audio source is stopped it will start fading in again and the beep sound will resume e Buttons on the unit other than the 0 will also function as the snooze button To turn the alarm off
22. completely In particular RT Radio Text information uses a lot of bandwidth so it may be less available compared to other types of information 15 En LISTENING TO FM STATIONS Presetting FM stations remote control only Use the preset function to store your favorite 30 stations Auto preset This method tunes automatically and automatically presets only the stations that have good reception El Press and hold down MEMORY AUTO PRESET will appear and Press MEMORY E will blink preset 7 E Press MEMORY Auto preset will begin When presetting has finished the display will indicate Completed J YAMAHA When you perform auto preset all stored stations are cleared and the new stations are stored re If you want to stop auto preset before it is completed press Ml Manual preset El Press TUNING lt gt gt to tune a station that ma you want to preset ap O o H Press MEMORY lt Cmo gt The display will indicate PRESET MEMORY and the preset number will blink Ej Press PRESET lt gt to select the preset number that you want to store re e The lowest preset number that has not been stored will be selected first e If you want to cancel the presetting press W a YAMAHA e If you select a preset number in which a station has already been stored it will be overwritten by the new station 1 Press MEMORY W
23. curred Change the height direction or placement of the antenna P 2 Remote control Problem Cause Solution The remote control does not work properly The remote control may be operated outside its operation range For information on the remote control operation range refer to How to use the remote control P 1 The remote control signal receiver on the unit P 4 may be exposed to direct sunlight or lighting inverted fluorescent lamps Change the lighting or orientation of the unit The battery may be worn out Replace the battery with a new one P 1 There are obstacles between the remote control signal receiver on the unit P 4 and the remote control Remove the obstacles 25 En NOTES ON DISCS AND USB DEVICES CD information This unit is designed for use with audio CD CD R and CD RW with the logos followings COMPACT _sycompact ice DIGITAL AUDIO DIGITAL AUDIO Recordable Recordable COMPACT COMPACT _fCOMmPAcCT 0 DIGITAL AUDIO DIGITAL AUDIO ReWritable ReWritable TEXT ISO 9660 format CD R RW C2 This unit can play back discs bearing any of the logo marks above A disc logo mark is printed on the disc and the disc jacket Do not load any other type of disc into this unit Doing so may damage this unit CD R RW cannot be played back unless finalized e Some discs cann
24. ders an external HDD etc e Yamaha will not be held responsible for any damage to or data loss on the USB device occurring while the device is connected to this unit e Playability of and power supply to all kind of USB devices are not guaranteed e USB devices with encryption cannot be used About MP3 or WMA files Oo e The unit can play back File Bitrate kbps frequency KHZ WMA 16 320 22 05 48 Both constant and variable bitrates are supported The maximum numbers of files folders that can be played on the unit are as follows Data CD USB Maximum total number of file 512 9999 Maximum folder number 255 999 Maximum file number per folder 511 255 Copyright protected files cannot be played back SPECIFICATIONS PLAYER SECTION iPod Digital connection As of July 2012 Compatible iPod models aroa E iPod touch 1st 2nd 3rd and 4th generations iPod nano 2nd 3rd 4th 5th and 6th generations Compatible iPhone models A TA iPhone 4S iPhone 4 iPhone 3GS iPhone 3G iPhone e Compatible iPad models iPad 3rd generation iPad 2 iPad An iPod may not be detected by the unit or some features may not be compatible depending on the model or software version of the iPod cD Mediar ooer ar E EENE CD CD R RW Audio format eserse na Audio CD MP3 WMA USB Audio format ssis MP3 WMA AUX e Input COMNECCtOT ces
25. e If you select a preset number in which a station has already been stored it will be overwritten by the new station Zi Press MEMORY This stores the DAB station When presetting has finished the display will indicate Completed El Press the RADIO source button to switch the audio source to DAB E Press OPTION The option menu will appear Ej Press a v to select PRESET DELETE and then press ENTER l Press a v to select the preset number that you want to delete e If you want to cancel the deleting press OPTION H Press ENTER to complete the operation When deleting has finished the display will indicate Deleted J Press OPTION to exit the option menu 13 En LISTENING TO DAB STATIONS Selecting preset DAB stations El Press the RADIO source button to switch the audio source to DAB F Press PRESET lt gt to select the DAB station that you want to hear re You can only select presets that have been stored O O o tms YAMAHA Checking the signal strength of DAB station Option menu El Press the RADIO source button to switch the audio source to DAB Ee E Press OPTION The option menu will appear Ej Press a v to select TUNE AID and then press ENTER 1 Press a v to select the DAB station The signal strength will appear Ej Press OPTION to exit the option menu 14 En LISTENING TO FM STATIONS Selecting an FM station To listen to a FM statio
26. front panel display allowing you to make the following settings A eject button cannot be operated while the option menu is displayed Option menu Setting or range See page PRESET DELETE Deletes a stored preset shown only if the audio source is DAB FM 13 16 DAB INIT SCAN _ Performs the initial scan shown only if the audio source is DAB 11 DAB TUNE AID Checks the signal strength of DAB station shown only if the audio source is DAB 14 DIMMER Adjusts the brightness of the front panel display 1 bright 2 medium 3 dim EQ LOW Adjusts the tonal character low frequencies 10 0 10 dB EQ MID Adjusts the tonal character mid frequencies 10 0 10 dB EQ HIGH Adjusts the tonal character high frequencies 10 0 10 dB BALANCE Adjusts the volume balance of the left and right speakers L 10 CENTER R 10 POWER SAVING Switches the system off state NORMAL Show the clock An iPod can be charged in the iPod Dock and the alarm will operate 7 ECO No clock display power saving mode An iPod can be charged in the iPod Dock but the alarm will not operate AUTO POWER You can specify the time after which the system will turn off automatically OFF If no operation occurs for the duration you specify the system will turn off automatically TIME 12H 12 hours TIME 8H 8 hours TIME 4H 4 hours OFF the system will not turn off CLOCK SET Sets the date and
27. g 3 7 Ibs GENERAL gt POWEL SUPPLY aeaea ERRE AC 230 240 V 50 Hz Power cOnsumpiO ieaie EEA S LETRES 30 W System off consumption 3 0 W or less NORMAL 0 5 W or less ECO Dimensions W x H x D E E E 180 7 1 8 x 127 5 x 278 11 mm Weights esunnnimronaa a aana 2 7 kg 6 0 Ibs Specifications are subject to change without notice Information for Users on Collection and Disposal of Old Equipment and Used Batteries These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling z pd D For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wis
28. h to discard these items please contact your local authorities or dealer and ask for the correct method of disposal Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved 27 En E For U K customers If the socket outlets in the home are not suitable for the plug supplied with this appliance it should be cut off and an appropriate 3 pin plug fitted For details refer to the instructions described below The plug severed from the mains lead must be destroyed as a plug with bared flexible cord is hazardous if engaged in a live socket outlet E Special Instructions for U K Model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE Blue NEUTRAL Brown LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED Make sure that neither core is connected to the earth terminal of the three pin plug CAUTION Use of controls or adjustments or performance of procedures ot
29. he DAB FM station you listened to last time is played back For information on creating a playlist refer to the instructions for your iPod or iTunes Snooze The snooze function can be enabled to replay the alarm after 5 minutes P 22 USING THE DTA Controller APPLICATION FOR THE iPod iPhone iPad By using the free DTA Controller application for the iPod touch iPhone iPad you can make detailed alarm settings that cannot be made using this unit by itself For each day of the week you can specify the alarm time Weekly Alarm and adjust the IntelliAlarm as desired Pe The front panel display shows information for the weekly alarm you ve set A iz MON TUE WED THU FRI SAT SUN TUE WED THU FRI SAT SUN Monday Tuesday Wednesday Thursday Friday Saturday Sunday For details refer to the description of DTA Controller in the product website 20 En USEFUL FUNCTIONS Setting the alarm Setting the alarm time and alarm type Option menu The alarm will not function when the unit is in power saving P 19 To use the alarm function set the Option menu item POWER SAVING to NORMAL El Press OPTION n The option menu will appear rao El Press a v to select ALARM SET and then press ENTER The alarm indicator and numerical value you re setting will blink Ei Set the alarm Set items 1 6 described below Press A to select a numerical value a
30. hen presetting has finished the display will indicate Completed Deleting a stored preset Option menu El Press OPTION The option menu will appear El Press a v to select PRESET DELETE and then press ENTER Ej Press a v to select the preset number that you want to delete re If you want to cancel the deleting press OPTION Zi Press ENTER to complete the operation When deleting has finished the display will indicate Deleted E Press OPTION to exit the option menu 16 En LISTENING TO FM STATIONS Selecting preset FM stations El Press the RADIO source button to switch the audio source to FM F Press PRESET lt gt to select the FM station that you want to hear re You can only select presets that have been stored HOO o __ preset 7 YAMAHA 17 En LISTENING TO EXTERNAL SOURCES Rear panel El Using a commercially available 3 5 mm mini plug cable connect your external device to the AUX jack on the rear panel of this unit e Turn off the system before connecting the audio cable Turn down the volume of the unit and your external audio device before connection Press C to turn the system on Ei Press the AUX source button to switch the audio source to AUX E Start playback on the connected external audio device 18 En USEFUL FUNCTIONS Using the Option menu When you press OPTION the option menu will appear in the
31. her than those specified herein may result in hazardous radiation exposure LASER SAFETY This unit employs a laser Due to possible eye injury only a qualified service person should remove the cover or attempt to service this device DANGER This unit emits visible laser radiation when open Avoid direct eye exposure to beam When this unit is plugged into the wall outlet do not place your eyes close to the opening of the disc slot and other openings to look into inside 28 En The laser component in this product is capable of emitting radiation exceeding the limit for Class 1 GLASS 1 LASER PRODUCT f LASER KLASSE 1 PRODUKT a LUOKAN 1 LASERLAITE ae CNNOCNN KLASS 1 LASER APPARAT PRODUIT LASER DE CLASSE 1 REE CAUTION CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM VARNING KLASS 3B SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR PPNAD STRALEN AR FARLIG VARO AVATTAESSA OLET ALTTIINA LUOKEN 3B NAKYVALLE JA NAKYMATOMALLE LASERSATEILYLLE ALA KATSO SATEESEEN VARNING KLASS 3B SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR PPNAD BETRAKTA EJ STRALEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG KLASSE 3B WENN ABDECKUNG GE FFNET NICHT DEM STRAHL AUSSETZEN ATTENTION RADIATION VISIBLE ET INVISIBLE CLASSE 3B LORSQUE L APPAREIL EST OUVERT EVITEZ TOUTE EXPOSITION
32. ic Label Segment ENSEMBLE LABEL v CHANNEL FREQ Channel label and frequency M SIGNAL QUALITY M AUDIO FORMAT Audio format DRC DAB frequency information This unit can receive Band III only Frequency Channel label Frequency Channel label Frequency Channel label 174 928 5A 197 648 8B 220 352 11C 176 640 5B 199 360 8C 222 064 11D 178 352 5C 201 072 8D 223 936 12A 180 064 5D 202 928 9A 225 648 12B 181 936 6A 204 640 9B 227 360 12C 183 648 6B 206 352 9C 229 072 12D 185 360 6C 208 064 9D 230 784 13A 187 072 6D 209 936 10A 232 496 13B 188 928 7A 211 648 10B 234 208 13C 190 640 7B 213 360 10C 235 776 13D 192 352 7C 215 072 10D 237 488 13E 194 064 7D 216 928 11A 239 200 13F 195 936 8A 218 640 11B 12 En LISTENING TO DAB STATIONS Presetting DAB stations remote control only Use the preset function to store your favorite 30 stations TUNING gt ALUL A A lt vemor gt PRESET YAMAHA Deleting a stored preset Option menu il Press TUNING lt lt gt gt to select a station that you want to preset Ed Press MEMORY The display will indicate PRESET MEMORY and the preset number will blink E Press PRESET lt gt to select the preset number that you want to store i The lowest preset number that has not been stored will be selected first If you want to cancel the presetting press W
33. ical shock to the user and or damage to this unit 6 Do not cover this unit with a newspaper tablecloth curtain etc in order not to obstruct heat radiation If the temperature inside this unit rises it may cause fire damage to this unit and or personal injury 7 Do not plug in this unit to a wall outlet until all connections are complete 8 Do not operate this unit upside down It may overheat possibly causing damage 9 Do not use force on switches knobs and or cords 10 When disconnecting the power cable from the wall outlet grasp the plug do not pull the cable 11 Do not clean this unit with chemical solvents this might damage the finish Use a clean dry cloth 12 Only voltage specified on this unit must be used Using this unit with a higher voltage than specified is dangerous and may cause fire damage to this unit and or personal injury Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified 13 To prevent damage by lightning keep the power cable disconnected from a wall outlet or this unit during a lightning storm 14 Do not attempt to modify or fix this unit Contact qualified Yamaha service personnel when any service is needed The cabinet should never be opened for any reasons 15 When not planning to use this unit for long periods of time i e vacation disconnect the AC power plug from the wall outlet 16 Be sure to read the TROUBL
34. n connect the antenna as described in Connecting the speakers and antenna P 2 El Press the RADIO source button to switch the audio source to FM B Tune FM stations Automatic tuning Press and hold TUNING gt gt Manual tuning Press TUNING gt gt repeatedly If you tune to a station manually while receiving FM the sound will be monaural TUNING SOO preset Display information remote control only If you press DISPLAY on the remote control the information shown on the front panel display will be switched in the following order eS Example of reception status indication Cie TUNED STEREO A strong FM stereo broadcast is being received OUO Preset number and frequency lt Reception status TUNED MONO A monaural FM broadcast is being received even if the FM broadcast is stereo reception will be monaural if the signal is weak Not TUNED No broadcast is being received Displaying Radio Data System information U K model only If you press DISPLAY on the remote control while Radio Data System information is being received the information shown on the front panel display will be switched in the following order PS Program Service y Program Type ar Radio Text d Clock Time Reception status Preset number and frequency If the signal transmission of the Radio Data System station is too weak this unit may not be able to receive Radio Data System information
35. nd press ENTER to confirm it Items Setting or range 4 ALARM SELECT This can be selected after you ve used the DTA Alarm time Controller to set the alarm P 20 If you re not using the DTA Controller proceed to item noo ONE DAY An alarm that sounds only once at the specified time WEEKLY An alarm whose time can be specified for each day of the week settable only using DTA Controller If you ve chosen WEEKLY this completes the alarm setting ALARM TIME Make settings in the order of hours gt minutes G ALARM TYPE Select from SOURCE BEEP SOURCE or BEEP For details refer to 3 types of alarms P 20 If you selected BEEP proceed to item 5 Alarm indicator SOURCE iPod Play back music from your iPod refer to If you selected Various audio sources P 20 SOURCE BEEP or CD Play back music from a CD SOURCE as the Specify the track number data CD folder alarm type number RESUME 1 99 USB Play back music from a USB device Specify the folder number RESUME 1 999 DAB FM Play a DAB FM station Specify the preset number RESUME 1 30 m If the selected source cannot be played back at the time set for the alarm e g the iPod is not connected the beep sound is played back re If you choose RESUME when specifying the track folder preset number the last played track folder station will be played resume playba
36. operation being performed after stopping USB device or CD playback the unit will turn the system off automatically Sound is cracked distorted or there is abnormal noise Input source volume is excessive or volume of this unit is excessive especially Bass Adjust volume with VOLUME or use the option menu P 19 to adjust the bass range If an external device is playing back lower the volume of the external device The unit does not operate properly The system turns on but immediately shuts off The unit may have received a strong electrical shock such as lightning or excessive static electricity or power supply may have dropped Restart the system by holding down the C for about 10 seconds A digital or high frequency equipment produces noises The unit may be placed too close to the digital or high frequency equipment Place the unit farther away from the equipment The clock setting has been cleared The unit was left for about one hour with the power cable disconnected from the wall outlet Plug the power cable into the wall outlet firmly and set the clock again P 6 The iPod does not play back at the alarm time even if the alarm source is set to iPod The iPod is not set in the iPod dock Set the iPod in the iPod dock P 3 Alarm does not sound The front panel display indicates ALARM not work and can t set the alarm The unit is set to po
37. ot be played back depending on the disc characteristics or recording conditions Do not use any non standard shaped discs such as a heart shaped disc Do not use discs with many scratches on their surface Do not load a cracked warped or glued disc Do not use 8 cm discs Handling a disc Do not touch the surface of the disc Hold a disc by its edge and S the center hole Sf Do not put a tape seal glue etc on a disc Do not use a pencil or pointed marker to write on the disc e Do not use a protective cover to prevent scratches Do not load more than one disc into this unit at one time This can cause damage to both this unit and the discs e Do not insert any foreign objects into the disc slot Do not expose a disc to direct 25 sunlight high temperature if K ay high humidity or a lot of dust Caution v LOD ZONA A e If a disc becomes dirty wipe it with a clean dry cloth from the center out to the edge Do not use record cleaner or paint thinner To avoid malfunction do not use a commercially available lens cleaner 26 En USB device information This unit supports USB mass storage class devices e g flash memories or portable audio players using FAT16 or FAT32 format Some devices may not work properly even if they meet the requirements Do not connect devices other than USB mass storage class devices such as USB chargers or USB hubs PCs card rea
38. peakers e Use only the supplied speakers Using other speakers may result in unnatural sound e If you re using this unit nearby a CRT display and you notice distorted color or noise in the display move the speakers farther away from the display To the AC wall outlet EA Sat See 60 MIN SPEAKER DAB FM antenna Be sure to stretch out the antenna Connecting the power cable When you ve completed all connections connect this unit s power cable to an AC outlet oe Rear panel OMUUCCCOUUUOCOOUUOCCL 2 En CONNECTIONS Other connections iPod Connect your iPod to the iPod dock on the top panel For details on compatible iPod models refer to SPECIFICATIONS P 27 Be sure to use a dock adaptor that is compatible with your iPod If you do not use the adaptor or the Dock adaptor is not compatible the connection could be loose or poor which could cause damage to the iPod dock adaptor connector For details on dock adaptor information please visit Apple s official website i e If an iPod in a protective case is forcibly connected the connector may be damaged Remove the cry protective case before connection e When the iPod is not in use install the dock cover to protect the connector 22 e
39. s in the order of year gt month gt day gt hour gt minute When clock setting has finished the display will indicate Completed ey e By pressing DISPLAY you can select the time format 12 hour 24 hour e The time will not be copied if the iPod is already connected or if the audio source is set to USB The time settings will be reset if the unit remains unpowered for about one hour El Press OPTION The option menu will appear El Press a v to select CLOCK SET and then press ENTER The display will indicate CLOCK YEAR and the numerical value to be set will blink El Set the date and time Press A to edit each numerical value and then press ENTER to confirm the setting Set the items in the order of year gt month gt day gt hour gt minute When clock setting has finished the display will indicate Completed The clock will be set to 0 second the moment you complete the clock settings re e While making these settings you can press DISPLAY to select the time format 12 hour 24 hour e If you decide to cancel without changing the setting press OPTION before confirming the change The time settings will be reset if the unit remains unpowered for about one hour LISTENING TO YOUR iPod Playing music from your iPod e For details on compatible iPod models refer to SPECIFICATIONS P 27 e Your iPod can also play back music and charge while connected to the US
40. ses eeeeeee 3 5 mm 1 8 STEREO mini jack AMPLIFIER SECTION e Maximum output power 15 W 15 W 6 Q 1 kHz 10 THD Headphones AEE E PE 3 5 mm 1 8 STEREO mini jack Impedance 16 to 32 Q e Equalizer characteristics EQ Low Bass EQ Mid Middle EQ High Treble 10 dB iPod iPhone iPad Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance iPad iPhone iPod iPod classic iPod nano iPod touch and iTunes are trademarks of Apple Inc registered in the U S and other countries TUNER SECTION Tuning range DAB DABt e FM 174 to 240 MHz Band NI 87 50 to 108 00 MHz SPEAKER SECTION TY Pe TEA nar vaverviveconnseenaeient Full range bass reflex non magnetic shielding type OUDTIVED ne raar E E ENT 11 cm 4 1 2 cone type x1 Frequency response sicisssiiirsresiisisseiiiess 50 Hz to 20 kHz 10 dB Dimensions W x H x D PERE T E 129 5 1 8 x 126 5 x 251 9 7 8 mm Wei glttisccssscsesterscainiesceeeaseceddpcadbneasscspeigonstesasienteadgiaisieede 1 7 k
41. ssccnsceeseseessecsseeseseeneseeonees NAMES OF PARTS AND THEIR FUNCTIONS 4 Top panel Front panel Front panel display saas ReMOte CONtrOl cicisccssccrscecesceaescisciceccecseecnsecioapecsedsedeesans Selecting preset DAB stations 14 Checking the signal strength of DAB station Option MENU eee ccceceeeseciscaacencivecaescdatiseacensiteseessiveaniatee LISTENING TO FM STATIONS ccssseesseeeees Selecting an FM station Presetting FM stations remote control only Selecting preset FM stations cc eeeeseeeeseeeeeeeeeee LISTENING TO EXTERNAL SOURCES ADJUSTING THE CLOCK OPTION MENU 6 USEFUL FUNCTIONS LISTENING TO YOUR iPOd cccssecsseeesseeeeeseeees 7 Using the Option menu Se eeeee ee eaeeaeeeeceeneeneeeeseeeeeeeeneeas Playing music from your iPOd sssssecsesesteeteeees 7 Using the sleep timer s s1151s1rstrstrrttsnrtrstnrterren ee Using repeat shuffle playback remote control only Aenea 8 Using the alarm function eee ceececeeeeeeeeeeeseeeeees LISTENING TO CD AND USB DEVICES 9 USING THE DTA Controller APPLICATION Listening to a CD 9 FOR THE iPod iPhone iPad ccccceeeeeeeeeeeteeeees 20 Listening to a USB device ccsssessssssessseessssecesseeessses 10 a au co oe a Using repeat shuffle playback remote control only 10 EEEE LISTENING TO DAB STATIONS MEAS NEDAL EANN ee 11 TROUBLESHOOTI
42. time gag l Song name co Kohi name Artist name T En LISTENING TO YOUR iPod Using repeat shuffle playback remote control only The playback status is shown by the repeat shuffle indicator in the front panel display Repeat playback Shuffle playback Press G repeat repeatedly to Press DG shuffle repeatedly to osu select one of the following osta select one of the following Ea C playback modes Ge w playback modes No display Off No display Off 1 One Deg Songs ALL G Albums Poms All re The operation or display of repeat shuffle may differ depending on the type or software version of iPod used 8 En LISTENING TO CD AND USB DEVICES The unit will operate as follows when playing back tracks files on CD USB devices If the CD USB device being played is stopped the track that you listened will start playback from the beginning of the track the next time you play e If you press m while playback is stopped tracks will play as follows the next time playback begins Audio CD from the first track of the CD Data CD USB device from the first track of the folder contains the track you listened to last time e This unit automatically turns off the system if no operation has been performed for 60 minutes after CD USB device playback is stopped Data CD is a CD that contains MP3 WMA files 3 For details on playable discs and files refer to NOTES ON DISCS AN
43. urce to USB moa Ifa USB device is already connected playback will start Ca C F Connect a USB device to the USB port Cor Playback starts automatically Playback can be controlled using either the remote control the front panel on this unit or the USB device amp P 4 5 es e Folders and files will play in the order in which they were written e Your iPod iPhone iPad can also play back music and charge while 20 connected to the USB port gt af Stop playback before disconnecting the USB device z Skipping folders remote control only TEE While a USB device is playing you can use the remote control s FOLDER A Gur ea buttons to select the folder CL Display information remote control only The folder file number is shown for several seconds when starting playback or a J Cn skipping tracks G If you press DISPLAY on the remote control while a song is playing or paused the information shown on the front panel display will be switched in the following order Elapsed song playback time Song name Album name Artist name File name Folder name Shown only if this data is included in the song Using repeat shuffle playback remote control only The playback status is shown by the repeat shuffle indicator in the front panel display Repeat playback Shuffle playback Press G repeat repeatedly to Press DG shuffle repeatedly to
44. wer saving mode In the option menu set POWER SAVING to NORMAL P 19 The unit turns the system off unexpectedly The automatic system off function may have operated When the time specified for AUTO POWER OFF in the option menu has elapsed P 19 or when 60 minutes have elapsed without any operation being performed after stopping USB device or CD playback the unit will turn the system off automatically 23 En TROUBLESHOOTING iPod Problem Cause Solution No sound The iPod is not set in the iPod dock firmly Remove the iPod from the unit and then set it in the iPod dock again P 3 The headphones of the iPod are connected Remove the Headphones The iPod software version has not been updated Download the latest iTunes software to update the iPod software version to the latest The iPod does not charge up The iPod is not set in the iPod dock firmly Remove the iPod from the unit and then set it in the iPod dock again P 3 USB is selected as the audio source Select something other than USB as the audio source The front panel display indicates iPod Unknown when you connect the iPod The iPod being used is not supported by the unit Use a supported iPod P 27 Disc playback Problem Cause Solution Disc cannot be inserted Another disc is already inserted Unload the disc with A
Download Pdf Manuals
Related Search