UVD-EVRDNR(-P) Camera User Manual
Contents
1. cursor on the Setup menu Figure 6 above to Camera ID and press Enter to display the Camera ID submenu Figure 7 below Figure 7 Camera identification CAMERA ID Me 2 3 456789 ABCD EF GHI J k MN OP OKR gt I U V XYZabcd e f c Character area i j kl mu 0 py r sjtuv WEI VY Z i Editing ET POSI Command area Blinking 2 Move the cursor to the character you wish to enter Press Enter and the selected character displays in the editing data area Repeat the process until you have entered or edited all of the characters 4 Move the cursor to the gt in the Editing data area UVD EVRDNR P Camera User Manual 5 Move the cursor to the blank character position between z and 6 To delete a character select the character so that it blinks and either move the cursor to the blank character position between the z and or move it to the DEL position and press Enter 7 Move the cursor to Posi and press Enter The camera ID displays on screen Figure 8 below Figure 8 Camera ID display 4 CAM 001 gt l K J OO 8 Press Up Down Right or Left to move the Camera ID to the desired position 9 Press Enter to fix the ID position and return to the previous menu Light control To adjust the light control do the following 1 Move the cursor on the Setup menu Figure 6 on page 9 to Light Cntl and press left or right to cycle between the DC Lens and2. GE Security UVD EVRDNR P Camera User Manual REV 01 00 e ISS O2SEPO9 Copyright Disclaimer Trademarks and patents Intended use FCC compliance Certification and compliance European Union directives Contact information 2009 GE Security Inc This document may not be copied in whole or in part or otherwise reproduced without prior written consent from GE Security Inc except where specifically permitted under US and international copyright law The information in this document is subject to change without notice GE Security Inc GE Security assumes no responsibility for inaccuracies or omissions and specifically disclaims any liabilities losses or risks personal or otherwise incurred as a consequence directly or indirectly of the use or application of any of the contents of this document For the latest documentation contact your local supplier or visit us online at www gesecurity com This publication may contain examples of screen captures and reports used in daily operations Examples may include fictitious names of individuals and companies Any similarity to names and addresses of actual businesses or persons is entirely coincidental GE and the GE monogram are trademarks of General Electric Company The UltraView name and logo are trademarks of GE Security Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective
3. ME Figure 9 below Figure 9 Light control menu selection DC lens SETUP MENU a 4 CAMERAID OFF gt LIGHT CNTL DC LENS m PRT 2 To set DC Lens press Enter when the DC Lens option is displayed The DC Lens menu appears Figure 10 on page 11 10 UVD EVRDNR P Camera User Manual Figure 10 DC Lens menu PE 77 DCLENS MENU m gt IRIS LEVEL og Av Pk B SHUTSPEED 1 50 RETURN V JJ Table 2 below describes the menu items in the DC Lens menu Table 2 DC Lens menu description Menu item Description Iris level Press Left or Right to adjust the level for autoiris lens to control light entering camera for DC type Ranging from 0 to 10 Av Pk This is the average to peak Av Pk setting for AE mode The default setting Is 8 4 Shutspeed Adjust the shutter speed to 1 60 NTSC 1 50 PAL 1 100 1 250 1 500 1 1000 1 2 000 1 5000 or 1 10000 sec Select a higher value to see movement and a lower value to see clearer images Press Up or Down to select an item 4 Press Left or Right to adjust the Av Pk value on the DC iris lens after level setting Av value The electronic convergence is automatically adjusted for the average photometric method with the average video signal level of the object as the right photometric value Pk value The electronic convergence is automatically adjusted for the peak photometric method with the peak video signal level of the object as the right p
4. ance WB is fixed at the moment the button is pressed e AWB autowhite balance The camera adjusts the WB itself To adjust the white balance do the following 1 Move the cursor on the Setup menu Figure 6 on page 9 to White Bal 2 Press Left or Right to cycle between ATW AWB and PTL 3 Toset PTL press Enter when displaying the PTL push to lock menu Figure 16 below Figure 16 Push to lock menu CCO n PUSH TO LOCK MENU a gt PTL PUSH RETURN J a ny The camera will process white balance Observe that PTL push changes to PTL setting Wait until the character change back to PTL push to exit the menu Picture control To adjust the picture control do the following 1 Move the cursor on the Setup menu Figure 6 on page 9 to Picture and press Enter to display the Picture menu Figure 17 on page 15 14 UVD EVRDNR P Camera User Manual Figure 17 Picture menu a PICTURE MENU m BRIGHT 05 GAMMA gG APERTURE 06 BLE ON AGC 12 N RETURN m 2 Move the cursor to the Bright position while observing the color video monitor waveform monitor or oscilloscope Press Left or Right to adjust the brightness level 3 Move the cursor to the Gamma position Press Left or Right to adjust gamma correction to one of nine gamma curves 4 Move the cursor to the Aperture position Press Left or Right to adjust aperture correction in the range 00 to 09 or automati
5. ble Power in Black cable Power in White cable Video out Black cable Video ground Note For AC24V or DC12V Black or Red may be used for ground Camera installation To mount the camera attach the camera to the mounting surface using the appropriate fasteners Angle adjustment To adjust the horizontal angle of the platform up to 180 degrees turn the platform Figure 4 below To adjust the horizontal angle of the rotor up to 350 degrees turn the rotor on the platform Figure 4 below To adjust the vertical angle of the platform up to 90 degrees turn the platform Figure 4 below Figure 4 Camera adjustment Platform horizontal adjustment Platform vertical adjustment Rotor horizontal adjustment UVD EVRDNR P Camera User Manual Focus adjustment To adjust the camera zoom and focus see Figure 5 below and do the following Loosen the zoom ring thumbscrew Turn the zoom ring to set the desired zoom Tighten the zoom ring thumbscrew Loosen the focus ring thumbscrew Turn the focus ring to set the desired focus Yat ey LY e Tighten the focus ring thumbscrew Figure 5 Zoom and focus adjustment Zoom ring thumbscrew for VA2 and focus ring for VA9 lens Focus ring thumbscrew for VA2 and zooming ring for VA9 lens Connect the monitor Program the cameras by attaching a standard video monitor to the system To connect the monitor do the following 1 Plug the monitor output cable Figure 2 on pag
6. c Note Set the aperture to automatic to avoid noise problems in a low light environment 5 Move the cursor to the BLC back light compensation position BLC electronically compensates for high background lighting to give detail which would normally be silhouetted Press Left or Right to select BLC on or BLC off 6 Move the cursor to the AGC automatic gain control position Increasing the AGC level increases camera sensitive at lower light levels Press Left or Right to increase or decrease the bright level low light condition Focus adjustment To adjust the focus do the following 1 Move the cursor on the Setup menu Figure 6 on page 9 to Focus ad 2 Press Enter to display the Focus adj menu This function is the automatic setting for lens focus adjustment 3 Press Enter when adjustment is complete to return to the Setup menu Miscellaneous Use the Miscellaneous MISC menu to adjust camera synchronization and lens applications To make these adjustments do the following 1 Move the cursor on the Setup menu Figure 6 on page 9 to Misc 2 Press Enter to display the Misc menu Figure 18 on page 16 UVD EVRDNR P Camera User Manual 15 Figure 18 Misc menu MISC MENU gt EXT SYNC LINELOCK MIRROR OFF MASK SYSTEM HOUR 08 MIN 00 SYSTEM TIME BACK DEFAULT RETURN External synchronization To adjust the external synchronization do the following 1 Move the cursor to the Ext sync pos
7. e 5 to the video monitor output connector Figure 1 on page 5 2 Connect the BNC cable to the video monitor 3 Press Enter see OSD control pad on page 9 to display the Setup menu Programming This chapter describes how to navigate the programming menus to adjust the camera settings Setup menu To access the Setup menu Figure 6 on page 9 do the following e To navigate to a menu item press Up Down Left or Right Table 1 on page 6 e Toselect the item for adjustments press Enter e To display the submenu for the selected item press Enter There isa menu map provided on the back page of the manual 8 UVD EVRDNR P Camera User Manual Figure 6 Setup menu T z 22 SETUP MENU CAMERA ID DFF LIGHT CNTL DC LENS D N CNTL WHITE BAL AWB PICTURE FOCUS ADJ MISC END 1 me e Toclose the Setup menu and return to normal camera operation mode move the cursor to End at the bottom of the screen and press Enter Note If you do not press the OSD control pad for one minute while any setting menu is displayed all modified data will be stored and the camera will return to normal camera picture mode e For menu position setting move the cursor to the K position and press Enter e To lock the Setup menu move the cursor to Unlock and press Enter e To unlock the Setup menu press Up Down and then press Enter in that order Camera identification To set the camera ID do the following 1 Move the
8. ears Figure 14 on page 13 4 Move the cursor on the Lux Delay menu to the Level position Press Left or Right to adjust 5 level thresholds 12 UVD EVRDNR P Camera User Manual 5 Move the cursor on the Lux Delay menu to the Delay time position Press Left or Right to adjust delay time from 5 to 60 seconds Figure 14 Lux Delay menu LUX DELAY MENU gt LEVEL DELAY TIME 20 SEC RETURN 6 To set Schedule press Enter when display Schedule menu Figure 15 below 7 Move the cursor on the Schedule menu to the D gt N time position Press Left or Right to set hour from 0 23 and minute from 0 to 59 8 Move the cursor on the Schedule menu to the N gt D time position Press Left or Right to set hour from 0 23 and minute from 0 to 59 9 Move the cursor on the Schedule menu to the Choice D N type position to switch D N mode Figure 15 Schedule menu c SCHEDULE MENU gt D gt N TIME HOUR 00 MIN 00 N gt D TIME HOUR 00 MIN 00 CHOICE D N TyPE RETURN UVD EVRDNR P Camera User Manual 13 White balance White balance WB tells the camera what the color white looks like Based on this information the camera will then display all colors correctly There are 3 methods to determine the WB e ATW auto tracking white balance The value used depends on the lighting condition selected It ensures reliable color reproduction when lighting conditions change frequently e PTL push to lock white bal
9. hotometric value Variation range 0 12 1 11 2 10 3 9 4 8 5 7 6 6 7 5 8 4 9 3 10 2 11 1 12 0 Manual exposure menu To access the ME manual exposure menu do the following 1 Move the cursor on the Setup menu Figure 6 on page 9 to Light Cntl and press left or right to cycle between the DC LENS and ME Figure 11 below Figure 11 Light control menu selection ME pe SETUP MENU C CAMERA IC OFF gt LIGHT CNTL ME Mii RITA UVD EVRDNRI P Camera User Manual 11 2 To set ME press Enter when the ME option is displayed The ME menu appears Figure 12 below Figure 12 ME menu E ME MENU gt SHUTSPEED 1 50 GAIN 05 dB 3 Press Up or Down to select an item 4 Adjust the Shutspeed to 1 50 1 120 1 250 1 500 1 1 000 1 2 000 1 5 000 or 1 10 000 sec Select a higher value to see movement and a lower value to see clearer images 5 Adjust the Gain to 05 13 22 or 30 dB 6 Move the cursor to select Return and press Enter to set the manual exposure and return to the previous menu Day Night control To adjust the white balance do the following 1 Move the cursor on the Setup menu Figure 6 on page 9 to D N CNTL 2 Press Left or Right to cycle between LUX DELAY SCHEDULE DAY and NIGHT Figure 13 below Figure 13 D N menu TT DINMENU PE D N TYPE LUX DELAY o eee 3 To set Lux Delay press Enter when the Lux Delay option is displayed The Lux Delay menu app
10. ition 2 Press Left or Right to align the camera synchronization type 3 When LineLock is selected press Enter to display the Ext Sync menu 4 Press Left or Right to align the sync phase Mirror To adjust the mirror do the following 1 Move the cursor to the Mirror position 2 Press Left or Right to turn the setting on or off Mask To adjust the mask do the following 1 Move the cursor to the Mask position and press Enter to display the Mask menu Figure 19 below Figure 19 Mask submenu MASK MENU gt MASK NO COLOR TYPE POSITION SIZE 16 UVD EVRDNR P Camera User Manual 2 Press Left or Right to select one of eight masks to be displayed onscreen to cover the private areas Move the cursor to the second line Press Left or Right to show or hide the mask 4 Move the cursor to Color type Press Left or Right to select one of three types of masking color White Gray or Black 5 Move the cursor to Position and press Enter Press Up Down Left or Right to change the mask position and press Enter when the desired position is selected 6 Move the cursor to Size and press Enter Press the Up Down Left or Right to change the mask size and press Enter when the desired size is selected 7 Move the cursor to select Return and press Enter to set the mask and return to the previous menu System Time 1 SYSTEM HOUR Move the cursor to set hour from O to 23 2 SYSTEM MIN Move the cursor to set min
11. perating this product Note A qualified service person complying with all applicable codes should perform all required hardware installation Safety terms These terms may appear in this manual CAUTION Cautions identify conditions or practices that may result in damage to the equipment or other property WARNING Warnings identify conditions or practices that could result in equipment damage or serious personal injury UVD EVRDNR P Camera User Manual Product description The UVD EVRDNR color video camera uses a digital signal processor DSP to process video signals The video camera includes a microcontroller to provide high quality images with high color reproduction and sharp pictures Features Camera features include Super HAD hole accumulated diode technology with 410 000 pixels NTSC 470 000 PAL Use of LSI large scale integration digital processors to produce 540 lines of horizontal resolution High resolution picture production using digital signal processors for horizontal and vertical aperture enhancement Smart digital automatic BLC back light control Advanced autoexposure system for both fixed iris and autoiris lenses to optimize the amount of light Internal or line lock external synchronization Long life and high reliability OSD control allows eight masks to be shown on the screen for subjects requiring special protection due to privacy concerns Advanced OSD onscreen display con
12. products Use this product only for the purpose it was designed for refer to the data sheet and user documentation for details For the latest product information contact your local supplier or visit us online at www gesecurity com This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications You are cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Ce 1999 5 EC R amp TTE directive Hereby GE Security declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC 2002 96 EC WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose ofit at designated collection points For more information see www recyclethis info 2004 108 EC EMC directive Non European man
13. trol Signal to noise ratio better than 48 dB Isolated switching power 12 VDC or 24 VAC Vandal resistant housing User guidelines Use the following guidelines Program as many camera settings as possible before mounting the camera Take appropriate safety precautions while completing programming after installation Always use a 12 VDC or 24 VAC UL listed Class 2 power supply to power the camera Do not use the camera outside the temperature range specifications 22 to 122 F 30 to 50 C If the light source where the camera is installed experiences rapid wide variations in lighting the camera may not operate as intended WARNING To reduce the risk of fire or electronic shock do not expose the camera to rain or moisture and do not remove the cover or back UVD EVRDNR P Camera User Manual Components The UVD EVRDNR cameras consist of the following parts e The camera assembly Figure 1 below e Monitor output cable Figure 2 below e Mounting screws wall anchors and hex key Use the video output BNC and power jack for normal system operation Use the monitor output cable for installation and maintenance Figure 1 Camera assembly Camera body Video monitor output System heater Power jack OSD control pad Video output BNC Figure 2 Monitor output cable 1 Monitor output BNC 2 Monitor output RCA UVD EVRDNR P Camera User Manual OSD control pad The onscreen display OSD control pad Fig
14. ufacturers must designate an authorized representative in the Community Our authorized manufacturing representative Is GE Security B V Kelvinstraat 7 6003 DH Weert The Netherlands For contact information see our Web site www gesecurity com For contact information see our Web site www gesecurity eu Content Preface 3 Product description 4 Features 4 User guidelines 4 Components 5 OSD control pad 6 Installation 6 Installation overview 6 Cable connection 7 Camera installation 7 Angle adjustment 7 Focus adjustment 8 Connect the monitor 8 Programming 8 setup menu 8 Camera identification 9 Light control 10 Manual exposure menu 11 Day Night control 12 White balance 14 Picture control 14 Focus adjustment 15 Miscellaneous 15 External synchronization 16 Mirror 16 Mask 16 System Time 17 Back default 17 Menu Map 18 UVD EVRDNR P Camera User Manual Preface This is the UVD XP3DNR P Camera This document includes an overview of the product and detailed instructions explaining e how to connect the camera and e how to program the camera and e how to adjust the camera angle and focus To use this document effectively you should have the following minimum qualifications e abasic knowledge of CCTV systems and components and e abasic knowledge of electrical wiring and low voltage electrical connections Read these instructions and all ancillary documentation entirely before installing or o
15. ure 4 is a five direction joystick that provides the ability to manually control the camera functions Table 1 below lists the OSD control pad functions and describes their use Figure 3 OSD control pad OSD control pad Table 1 OSD control pad functions Pad directions Description Up Moves the cursor upward to select an item Left Moves the cursor left to select or adjust the parameters of the selected item Right Moves the cursor to the right to select or adjust the parameters of the selected item Down Moves the cursor downward to select an item Enter Press the center of the control pad to display the Setup menu If the selected item has its own menu press the control pad to enter a submenu Press the control pad for 2 seconds to save all settings and exit the Setup menu Installation Complete all the necessary programming before you install the camera This chapter provides information on how to install the camera and adjust camera angle and focus Installation overview To install the camera you will need to prepare the mounting surface make cable connections and mount the camera 6 UVD EVRDNR P Camera User Manual Cable connection To make cable connections do the following 1 Connect a coaxial cable from the camera s BNC connector to a CCTV monitor or video recording device 2 Connecta 12 VDC or 24 VAC power supply to the power input The label on the camera gives the following information Red ca
16. ute from O to 59 3 SYSTEM TIME select DISPLAY or HIDE to turn on time display on OSD or not Default is HIDE Back default Select Back default to return the settings to the default settings UVD EVRDNR P Camera User Manual 17 Menu Map ID AW AWB Mask No Color Type Position Back Default IN M
Download Pdf Manuals
Related Search