Portable Rechargeable Speaker XC-5209
Contents
1. If you press and hold the N button the Bluetooth will disconnect and you will hear Waiting for Connection Press the or buttons once to select the previous track or the next track Press and hold the or buttons to increase or decrease the volume In Bluetooth mode doesn t work with 3 5mm audio cable when there is k an incoming call press R to pick up the call and press it again to hang up2. User Manual Portable Rechargeable Speaker XC 5209 Distributed by TechBrands by Electus Distribution Pty Ltd 320 Victoria Rd Rydalmere NSW 2116 Australia Ph 1300 738 555 Int l 61 2 8832 3200 Fax 1300 738 500 www techbrands com Specifications Output Power 2 x 3WRMS Bluetooth Range 10m Frequency Response 90Hz 18kHz Impedance 4 Ohm Charging Time 3 5 4 hours Playback Time At max volume 5 hours At 80 volume 6 5 7 hours Dimensions 170 L x 65 H x 35 W mm Power and Charging The unit has a built in rechargeable battery Before using the speaker please follow these steps to charge the unit first I Note Using the supplied USB cable plug into speaker and the other end into a USB power terminal During charging the LED will be red Once it is fully charged the LED will turn off When the battery is low a voice will soeak Low Battery Please Charge Once the battery has been depleted the speaker will power off Your battery will last longer if you follow these guidelines When charging for the first time charge for at least 10 hours The battery will have a better performance if it is fully charged and fully discharged 3 times Not discharging a battery completely before recharging again can impact the battery s lifetime Recharge and store the unit within the temperature ranges of 5 C and 35 C Do not charge for longer than 24 hours Excessive charging may shorten
3. the battery s life Bluetooth Pairing 1 Slide the power button to the ON position the blue LED at the front of the speaker will be flashing quickly and the speaker will sound briefly Bluetooth mode on It is now in Bluetooth pairing mode Turn on the Bluetooth Technology pairing of your device and search for XC5209 Select this name and input 0000 as the password if prompted The speaker will sound Matching OK and the blue LED at the front of the speaker will flash slowly to show that the pairing has been successful Select the music to play from your device or use as per the Operation Instructions below NFC Near Field Communication 1 To use the NFC function you must have an NFC enabled device Ensure that the NFC on your device is turned on and hold your NFC enabled device over the NFC logo on the speaker 2 This will connect your device to the speaker and any previous devices that were connected will be disconnected 3 Select the music to play from your device or use as per the Operation Instructions below AUX Link 1 After powering on the unit use a 3 5mm audio cable to connect your music device with the speaker The LED on the front will turn red and the speaker will sound Under Line in Mode 2 Select the music to play from your device or use as per the Operation Instructions below Operation Instruction Lh Press the R button once to Play and Pause the music
Download Pdf Manuals
Related Search