to down load a full owner`s manual for the ultra
Contents
1. WBN Inc 2010 The Consortium of Global H20 Water Manufacturers PlanetWater Copyright 2001 2010 The White Buffalo Nation Inc All rights reserved The Information Technology Statements or the technology advancements contained in all WBN amp Consortium member web sites or Equipment may not be Copied published broadcast rewritten redistributed manufactured or used without the prior written authority of The White Buffalo Nations Consortium of Global H2O Manufacturers or Planet Water Copyright 2010 WBN Inc All rights are reserved THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 242. input Do not use any old water pipelines to connect unit empty water in all tanks Do not tilt the machine more than 20 during moving PRECAUTIONS obtained when the unit is placed at least 20 cm from the wall This unit is not intended for commercial or outdoor use Avoid prolonged exposure to direct sunlight on the digital display Keeps the unit working in standing position Operating voltage must not drop below 10 of standard power supply When the unit operates below this level the unit becomes Do not place the unit too close to the wall Best performance is SS THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 2 THE ULTRA SERIES USER MANUAL noisy with the possibility of overheating When this occurs immediately switch the unit off until the voltage returns to normal 6 Avoid prolonged direct eye exposure to ultraviolet device as it may damage the eye Prevent children playing with HOT knob to avoid scalding 8 This unit is not suitable for use at places with spray water Do not use spray water to clean the unit 9 To prevent the machine from damage caused by freezing please drain off the remaining water and stop operating the machine if the environmental temperature during its operation is below 0 10 If there is any damage to the power cables the cables must be repaired or replaced by an authorized person to avoid danger 11 For the condition of operating on uneven ground a fi
3. 11 Water heating icon When icon light on means heating process allows icon lights off means heating stops flashing means heating in process 12 Top tank UV light indicator when icon light on means top tank UV light function normal light off means UV light not working Flashing means top tank UV not functioning normally b Reflux UV light indicator when A icon light on means reflux UV light on means UV light function normal light off means UV light not working Flashing means top tank UV not function normal c Bottom tank UV light indicato when icon light on means bottom tank UV light function normal light off means UV light not working Flashing means bottom tank UV not functioning normally 17 Hot water temperature indicator Indicating temperature value 18 Cold water spout dispense contd continuous light Touching the icon will dispense cold water 19 Hot water unlock indicator when hot water is needed Touch unlock icon to unlock then keep Touching unlock icon until hot water dispensing icon Be 18 flashing Then Touch B to release hot water THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 21 THE ULTRA SERIES USER MANUAL 20 C F conversion indicator a To convert Centigrade or Fahrenheit value 21 Adjustment enter function setting choose function and make adjustments 22 Touch mode icon 3 to select a function select function needed to be adjusted a H ON
4. organic compounds etc THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS THE ULTRA SERIES USER MANUAL 5 Post Carbon Silver Sterilizer Removes volatile organic compounds and improve water taste and smell and adds an extended shelf life to the water by adding ionic silver by killing all bacteria and viral possibilities 1 Top Tank UV Sterilization Lamp eliminates 99 9 all bacteria levels in top tank 2 Bottom Tank UV Sterilization Lamp eliminates 99 9 all bacteria levels in Bottom tank 8 3 Water Output UV Sterilization Lamp eliminates 99 9 of all bacteria levels ensuring the cleanest safest and the purest water in all unit dispensed water k Water Recirculation Our patented exclusive technology ensures that stored water remains fresh pure and clean and avoids second hand viral contamination and is kept sanitized I Overheat Protector Overheat protector offers further protection for your machine In case of overheating in the water heater during the heating process this protection will automatically shut off the heater unit m An advanced and ultramodern very Regal Body style and many colors available This Water Precipitation Generator has a Very Stable base and will not tip over as with all the other sleeker designs of other Generators on the market today The unit is the top water producing unit on the market in 2010 and the most versatile An advanced VFD display is added to make the operation of the unit s operating
5. The unit is generating water when the icon flashes 13 Humidity Display of the current humidity 14 Warning Icon Normal when the icon remains on the icon will flash when water leakage is detected 15 Defrost Icon The unit is on defrosting process when the icon flashes There can be frost because of low temperature in some areas 16 Water Recirculation Icon Water recycling is on when the icon flashes 17 Filter Icon Normal when the icon remains on When flashes lt Q the filter should be cleaned or replaced Please refer to section on CLEANING STERILIZATION amp REPLACEMENT for details THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS THE ULTRA SERIES USER MANUAL 8 Water Output U V Lamp Icon The U V is working well when the icon remains on If it blinks U V is working abnormally 9 Water Level indication of Top Tank Higher the level displays more water contains 1 Please confirm parts in the package are a complete set The unit should be placed on solid and level ground and be located in a place with good air circulation The unit should be placed no less than 20 cm from the wall Push down the lever of the braking wheel to get the machine in fixed position 2 DO NOT connect the unit to power within the first hour after your shipment arrives let the machine remain in a standing position to make sure the refrigerant returns to the compressor Upon arrival instantly plugging the
6. functions easy to follow including air humidity water temperature and all operating systems in the unit and water quality and filter conditions N WARRANTY INFORMATION Your new ULTRA SERIES Water generation systems have a one year warranty and 2 years on the compressor against manufacturing defects And a lifetime limited warranty on the water generator itself Labor shipping is not included To be eligible for the warranty coverage your must fill out a warranty card If you have not please contact your local Consortium member to do so within 30 days or your warranty may not be valid and has an expiration of 30 day from the date of purchase N VII OPERATING YOUR NEW ULTRA WATER PRECIPITATOR By following these simple instructions and simple maintenance procedures your Water Generator should give you years of trouble free operation while producing the maximum amount of pure high quality drinking water that is beneficial to your health Please read this operation manual carefully before you start your new water generation machine By reading and following this simple manual you will familiarize yourself with your new water generator and all its functions ensuring yourself of a machine which constantly operates at its optimum level THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 5 THE ULTRA SERIES USER MANUAL ULTRA 7 CONTROL SCREEN OPTIONS INCLUDE DIGITAL TOUCH SCREEN CONTROLS gt VFD SCREEN DISPLAY POWER POWER SWI
7. position of the copper tube slightly and slowly if it is Once all the above procedures have been performed and your machine still does not work or does not work correctly please do not try to perform any repair procedures yourself Always call a qualified service technician or your local Consortium member to look at the machine and or perform the repair procedures We are not responsible for any damages incurred during self reparation This voids the warranty IX TECHNICAL SPECIFICATIONS a Dimensions Ultra7 series Height 111 cm Width 40 5 cm Depth 54 cm Net Weight 48 5 kg b Power supply max 15 Amp input GLOBAL power supplies and plugs available for International use a c 220 240V 50Hz a c 120V 50Hz a c 220 240V 60Hz a c 120V 60Hz Power input 990W 1100W 970W Heating Wattage 500 600W 500W Operation Power 450 500W 430 460W THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 18 Voltages available THE ULTRA SERIES USER MANUAL c Water Production of over 10 gallons a day Working Temperature From 37 F or 2 8 C 101 F or 38 3 C Working Humidity From 22 TO 100 Relative Humidity without an Evaporizer Water Storage Capacity 20 Liters all Stainless Steel Tanks amp Tubes FULL Cold Water Temperatures 2 C or35 F 9 Cor 48 F UltraPure Sanitized Water production at Sea Level Can produce over 10 gallons a day with optimized Environmental conditions Barometric Humidity and Temperature FILTER LIST
8. 0 MANUFACTURERS THE ULTRA SERIES USER MANUAL VI FEATURES OF YOUR NEW WATER PRECIPITATOR a Advanced Micro computer controlled The unit 15 fitted with an advanced micro computer which ensures proper working of internal parts to regulate hot or cool water temperature setting supervise and control the functionality of individual parts inside the unit b Electronic Sensors Various electronic sensors are attached to parts such as the UV lights heating mechanism and storage tanks These sensors ensure that all parts are working properly and warn you should a breakdown or performance irregularities occur in the machine The most advanced system on the planet c Energy Saving Features To conserve electricity electronic sensors have been placed in the storage tank to automatically stop the machine from making more water when the tank is full and hot cold water reaches the preset data d Child proof Hot Water Lock out The function of hot water lock out is to prevent children from scalding themselves upon touching the water tap e Ventura Fan Newly designed Ventura type fan increases production efficiency and greatly reduces the noise during operation f Water Leakage Detector In case of any unexpected situation of water leakage the machine can stop working automatically accompanied with a warning sound and flashing VFD g De vaporization condensers These condensers are advanced designed specially with FDA food grade coating t
9. 3 Replace the cool water out U V a Switch off the unit and unplug the power cable from the socket before replacing picture 3 3 1 b Open top cover picture 3 3 2 c Remove foam cup of U V picture 3 3 3 d Remove black insulation cover picture 3 3 4 e Disconnect UV electrical connection pin picture 3 3 5 Pull out U V bulb picture 3 3 6 Replace with new bulb and replace all parts gu BU MEL DM lt 4 Attention It is recommended to dispense not less than 3 liters of water every day 4 2 If hot water is not dispensed for a long period it is recommended to turn on the heating process for more than 30 minutes once a week Keep pressing the HOT button to unlock and press to release 500 ml of hot water from faucet 4 3 If the machine was not in use for 2 to 5 days please drain out 500ml of cool water before dispensing for drinking use If the machine is to be inactive for more than 5 days it is recommended to drain water in all tanks and switch off the machine in advance For reactivation please run the system to produce about 5 liters of water and drain off from the back drain outlets 4 4 If the machine was not in use for more than 7 days or it has been in continuous operation for more than 4 months please follow the steps in CLEANING STERILIZATION amp REPLACEMENT to sterilize the system 4 5 Switch off the power first before draining water from the back outlets THE CONSORTIUM OF
10. 5 indicator will be lit when heating is switched on It will turn off when the machine is not in the heating process The heating mechanism will be triggered on and the red 2 indicator will blink when the water level reaches preset condition It will turn off automatically when water is hot enough During heating stage press HOT button to switch off heating process 4 When there is enough water in your machine press the COOL key on the panel to switch on or off the cooling process The green indicator light will be lit when cooling is switched on It will turn off when the machine is not on cooling process The cooling mechanism will be triggered and the green indicator will blink when the THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS THE ULTRA SERIES USER MANUAL water level reaches the preset condition It will turn off automatically when water is cool enough During the cooling stage press the COOL button to switch off the cooling process 5 Press button to switch temperature display between Celsius and Fahrenheit 6 Generally both heating and cooling can be turned on together When the machine is in heating and cooling process the hot and cold water temperature will remain in the preset range automatically Keep pressing C F button to have the Hot water temperature display indicate the current setting Then press the HOT or COOL button to adjust the setting Press HOT to raise the setting value p
11. CTION Thank you for purchasing the most technologically advanced electronic Water Precipitation Generator with an Ultra Pure Water delivery system on the planet today This Water Precipitation Generator is the newest state of the art pure water manufacturing machine which uses some of the newest and most sophisticated electronic technology available in the industry today We have designed your Water Precipitation Generator to produce the maximum amount of the healthiest highest quality Ultra Pure drinking water available with the only silver purified water on the planet while using only a minimum amount of electricity With an external connection to city water as an added bonus the machine will serve as a Ultra water purifying POU dispenser with hot and cold water and will dehumidify clean amp air condition the air besides generate Ultra pure water from the air you Breath More pure than Dew The purest and healthiest water on the planet no exceptions SAFETY NOTES The power outlet should be equipped with reliable grounded protection Do not remove grounding terminal from the power cord Do not use extension plug nor extension adaptor Always keep the unit from poisonous gas and liquid Do not use damaged electrical plug or power cable Unplug power cord before maintenance Do not share the electrical outlet with other high power consumption appliance Always use correct replacement parts Do not unplug power cord with wet hands
12. FOR THE ULTRA SERIES WATER PRECIPITATORS NO PICTURE MODEL PART NAME U PRICE USD EF F001 REVERSE OSMOSIS 100pcsQ 25 00 MEMBRANE 1pc 25 90 EF F002 EF1 FILTER 150pcs 5 30 150 500pcs 2 5 10 EF F003 EF2 FILTER 150pcs 5 30 150 500pcs 5 10 EF F004 EF3 FILTER lt 150 5 285 30 150 500pcs 5 10 1 PC 9 95 SILVER STERILIZER 25 100 8 50 CARBON FILTER FL F0037 DOWN CARBON FILTER ON 100pcs 7 20 gt THE TOP OF THE BOTTOM S S HOLDING TANK 5 FL P022 AIR AIR FILTER 100pcs 5 80 UU Mme 7 NF M001 2 NANOMETER 100pcsQ 2 20 FILTRATION NET FAUCET THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 19 THE ULTRA SERIES USER MANUAL EL E005 UV PHILIPS ULTRA 100pcs 2 18 80 VIOLET LAMP EL UVO4 001 100pcs 16 59 PHILIPS ULTRAVIOLET LAMP CONSISTING OF UV LAMP QUARTZ GLASS TUBE AND SOCKET EL UV11 001 100pcs 2 17 65 234 67 8 7 REFLUX FILTER WARNING 14 22 13 21 12 20 11 1 Hot water dispensing indication when BS icon flash it means the tap is unlock continue light Touching B icon water dropping icon motion flashing means hot water is dispensing THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 20 THE ULTRA SERIES USER MANUAL 2 Bottom tank water level indication the arrow indicates water level pointing at means the tank is empty number increases as water level rises 5 means the tank is full 3 UV w
13. GLOBAL H20 MANUFACTURERS 16 THE ULTRA SERIES USER MANUAL TROUBLE SHOOTING Problem The U V WARNING light blinks with three short beeps Solution Check the ultraviolet device in the top tank to make sure the bulb is on and all wirings are correct If the U V is not working replace with new bulb by following the steps in CLEANING STERILIZATION 8 REPLAC ENT Problem The whole U V WARNING logo blinks and makes three short beeps Solution Check the ultraviolet device at the cool water output to make sure the bulb is on and all wirings are correct If the U V is not working replace with new bulb by following the steps in CLEANING STERILIZATION amp REPLACEMENT Problem The machine does not work even after the power cord 15 plugged in Solution Check for proper power voltage and ensure that it is in the correct range for operation Make sure that the connection to the wall outlet is tight secure amp grounded Problem the indicator 223 REPLACE on VFD display is blinking with beeping Solution After a long period of operation the filter might be overly dirty and needs to be replaced Replace with a new filter by following the steps in CLEANING STERILIZATION amp REPLACEMENT Reset the filtration warning time by following the 7th step in the section OPERATIONAL STAGE Problem LEAKS The system detected water leakage on base The red logo on the screen blinks and the system cannot produce water the sy
14. NAL TANK full 11 When the air is dry or during cold season water generation will be slow At this point external connection to city water will make the machine serve as a water purifier by utilization of the filtration and sterilization system Some parts are optional Please contact the local distributor for purchase When switched on all is automatic THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS THE ULTRA SERIES USER MANUAL Filter Cup PPF Filter D zu 2 Water tubing Input Valve X oM x Tee connector gt City water input PA 7 B conection Optional parts 12 For the first operation when the top tank is full of generated water please follow the steps in CLEANING STERILIZATION amp REPLACEMENT to eliminate the smell of new machine d CLEANING AND REPLACEMENT OF FILTERS Recommended Timing for Filter Replacement will vary according to your water consumption The timing below is based on 8 liters of water consumption per day 1 EF2 Carbon Filter EF2 F002 or Two Nanometer Molecular Sieves di opis OF Sy UNITING 6 To12 months clean or replace NF NOO1 2 Pre Carbon Filter 1 1 24 months or by unit filter light 3 Pre Carbon Filter EF F003 24 months or by unit filter light 4 Reverse Osmosis Membrane RO 001 24 36 months or by unit filter light 5 Post CarbonFilterEF F004 WBSF 05 24 months or by unit filter light 24 months or upon UV fa
15. OFF indicate present heating function on or off Touch 8 to make desire adjustment b C ON OFF indicate present cooling function on or off Touch to make desire adjustment c W ON OFF indicate present water generating function is on or off Touch 8 to make desired adjustment 075 095 shows the present hot water temperature soft Touch adjustment icon EM set desired temperature adjusting range between 75 95 C e C 004 010 shows the present cold water temperature soft Touch adjustment icon Y9 to set desired temperature adjusting range between 4 10 C f T 000 indicate filter system usage time period soft Touch adjustment icon S28 to reset time RESET soft Touch adjustment icon S28 to reset machine back to original factory setting H FT O0 indicate the present water generating component temperature inside machine 23 Power control key Normal operating condition and stand by condition function When machine operate normally continuous soft touching the Power key machine will switch to stand by condition During stand by condition soft touch Power key and machine will switch back to normal operating condition 24 Hot water spout dispense continuous soft Touching icon until the by icon flashing then Touch B to dispense hot water THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 22 THE ULTRA SERIES USER MANUAL S E Most Advan
16. TCH HUMIDISTAT CONTROL w HOT WATER te FS FILTRATION SYSTEM RESET OUTPUT HEATING OFF T COLD WATER OUTPUT CELCIUS FAHRENHEIT SHIFT BRAKING LEVERS THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS THE ULTRA SERIES USER MANUAL a VFD INDICATORS OR WITH DIGITAL TOUCH SCREEN CONTROLS ULTRA 7 D T S 1 2 3 4 1 T CONDENSATION ULTRAVIOLET b SETTING UP your New Water Generator 9 10 1 Hot Water Indication When hot water lock is unlocked this logo will flash 21 Heating Icon Heating function 15 started when the icon remains on the unit is in heating process when the icon flashes Cool Water Indicator Cooling Icon Cooling function is started when the icon remains on the unit is in cooling process when the icon flashes 5 Hot Water Temperature Press C F key on the panel to switch water temperature display between Centigrade and Fahrenheit 6 Cool Water Temperature Press C F key on the panel to switch water temperature display between Centigrade and Fahrenheit 71 Top Tank UV Lamp Icon The U V s are working correctly when the icon remains on it blinks UV is working abnormally HUMIDITY 12 13 14 15 16 17 11 10 Booster Pump Icon The Pump 15 working when the icon flashes 11 Water Level Indication of Bottom Tank Higher the level displays more water is contained 12 Water Generating Icon
17. THE ULTRA SERIES USER MANUAL gt eet um Instruction manual for Hybrid Ultra 7 Series Systems Advanced Ultra Water Manufacturing and Delivery Systems I INTRODUCTION ccr rrr rrr rrr rn 1 II SAFETY NOTES S eo e e o n 1 PRECAUTIONS 1 IV MAINTENANCE S o o o 2 V HOW DOES YOUR WATER PRECIPITATOR WORK 2 VI FEATURES OF WATER Precipitator 3 VII OPERATING YOUR WATER Precipitator 5 VIII TROUBLE SHOOTING ru 15 IX TECHNICAL SPECIFICATIONG 19 X OPTIONAL DIGITAL TOUCH SCREEN CONTROL INSTRUCTIONS 21 THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS E LE 8 9 10 Use the enclosed water pipe kits to connect with city water 11 When moving the machine please unplug the power cord and THE ULTRA SERIES USER MANUAL I INTRODU
18. arning indicator UV light is working well when icon keeps on If it blinks UV light is not functioning 66 4 Water generating indicator When icon shows motion the machine 15 generating water When icon lights on without motion generating stops If the icon blinks it means the water generating function has been shut off manually 5 Booster bump icon indicator The bump is working when the icon flashes 6 Humidity indicator Under normal operation it indicates humidity level During settings it indicates adjusting value 7 Top tank water level indicator the arrow indicates water level pointing at means the tank is empty number increases as water level rises 5 means the tank is full 8 Cold water dispensing indication light 8 Touching on the icon eb water dropping icon motion flashing means cold water is dispensing Cold water temperature indicator indicate cold water temperature 9 Cooling function indicator When the icon light 15 on means cooling process allows icon lights off means cooling stops flashing means cooling in process Leak warning icon icon light off means normal light on when leak is detected Filter indicator when icon light on means normal flashing means need to replace filter or clean up is needed 9 Recycle indication icon flashing means water is recycling 10 Defrost icon DEFROST icon flashing means the machine is defrosting
19. ced Water Production Capacity on the Planet over 40 Liters a day with 87 Relative Humidity with Water More pure than DEW Or a 7 0 PH mineralized or with SilverSterilizer amp AquaDew amp UltraDew amp PurePH or UltraPH filtering systems Se end Laing ite ANS NIE i gt WPT Tey The Most Technologically amp Electronically Advanced Water Generators on the planet TODAY called Hybrid W P G Water Precipitation Generators with 3 types of More Pure than Dew Water that is Guaranteed The Consortium of Global H20 Water Manufacturers PlanetWater are Divisions and Projects of W B N Inc THE WHITE BUFFALO NATION Inc SolarWorld Plaza P O Box 211162 THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 23 THE ULTRA SERIES USER MANUAL Crescent Valley Nevada 89821 1162 U S A Questions or Problems Call 001 775 468 0372 or your nearest Consortium member These units cost under 1100 00 shipping and are delivered right to your door D H L In 15 days or less guaranteed for samples only after proof of Pay Pal Bank Deposit or Wire Transfer All Prices are Wholesale to the public per sample or by the container of 20Ft 103 units or 40 Ft 215 units add 59 00 per unit for shipping anywhere in the World with minimum order 25 units THE MANY NEW PATENTS ON ALL OUR NEW ULTRA SERIES WATER GENERATORS DO NOT INFRINGE ON ANY OTHER PATENTS INVOLVED IN ANY OTHER WATER GENERATORS FROM ANY COMPANY ON THE PLANET GUARANTEED
20. ch as 60 in the winter Because your Water Precipitation Generator works converting condensing the humidity in the ambient air to ULTRA pure drinking water this unit also Cleans the air with a 5 part air filtration system patented micro partial and electrokinetic s to give your home the cleanest air for health and wellness that is needed The Professor s water generation systems act as a complete very effective almost perfect dehumidifier in areas with high humidity It not only acts as a great water generator but also a perfect dehumidifier to keep your family and office workers breathing pure and healthy Air and Water more Pure than Dew 110 Guaranteed AquaDew UltraDew coming soon to stores near you and ensure your new home appliance has a very long service life To ensure highest quality drinking water our Water Precipitation Generators utilize multiple filtration and sterilization technologies 15 stages OF PATENTED FILTRATION that is UL Listed including 3 complete UV Sterilizer systems with patented continual reflux sterilization When the air is dry or during cold season water generation will be slow At this moment connection to city water as a POU R O pure water delivery system and will make the machine serve as a perfect water purifier by utilization of the filtration and sterilization system 3 UV purification systems with options of SilverSterilizer Aqua Dew filters and UltraDew water THE CONSORTIUM OF GLOBAL H2
21. ck and press we to release 2 L of hot and cold water each from faucet Turn off the unit and drain all remaining water from the hot water drain outlet at the back picture 1 4 16 Ihh m iil l 2 Sterilization The brand new machine may be sterilized after one week of service at your option 2 1 Prepare sterilization solution Prepare 10 liters of sterilization solution special solution for water dispenser Recommended to use hydrogen peroxide solution 2 2 Keep pressing POWER to shut down the unit picture 2 1 open top cover picture 2 20pen top tank cover picture 2 3 fill the solution into the top tank picture 2 4 replace top tank cover and make sure it s tight Replace back top cover 2 3 Turn on the unit Press 55 and keep pressing HOT to unlock and press we to release 1 L of solution each from faucet picture 2 5 Shut down the unit Drain off about 0 5L of the remaining solution from the hot water drain outlet at the back Keep the remaining solution soaking in the top tank for more than 2 hours or as per instruction of the solution 2 4 Run the unit Press and keep pressing HOT to unlock and press to release 2 L of solution each from faucet Shut down the unit Drain all the remaining solution from the hot water drain outlet at the back 2 5 Fill city water into the bottom tank Turn on the unit and have it running automatically until the top tank
22. els Problem The machine makes water at a slow rate even after a prolonged period of operation Solutions Make sure the temperature level is in the appropriate range THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 17 THE ULTRA SERIES USER MANUAL Check the humidity level low humidity level results in less water production Make sure that the hot cold water spouts are not blocked Make sure that the ingoing and outgoing air ventilation is not blocked Check that the distance between machine and the wall is not too close Make sure that the power voltage is not too low too high Make sure that the internal booster pump is working well Make sure that the water lines are not blocked and water flow is smooth Make sure that unit is placed with good ventilation and the air filter net is cleaned regularly to ensure free air flow Problem Humidity indicator on the screen is different from the real room humidity level e Itis normal if the difference is in the range of 5 more or less e Make sure that the humidistat sensor is not blocked covered or too close to the wall Problem The machine is making excessive vibration or noise e Make sure there is no object placed on top of the machine e Make sure that there is no water cup placed on the water tray e Open front bottom panel and check to be sure the copper tube on the inside of the unit is not touching the side panel Correct the
23. er from the side as shown in picture 1 1 1 1 1 2 1 1 3 Rinse in clean water to remove dirt and then replace IN mt n mmm TN A EJ wi B b 1 2 Cleaning of the water collector Remove water collector from the back Clean and return to original position 1 3 Cleaning the bottom of the tank a Keep pressing POWER to switch off the power as shown in Picture 1 3 1 unplug the power cord b Remove bottom tank Picture 1 3 2 c Open tank cover picture1 3 3 remove filter cup picture1 3 4 d Remove filter net A filter bracket B and filter fiber C Rinse the cup filter with clean water D Picture 1 3 5 e Disconnect the pin of bottom water sensor picutre1 3 6 pull out water outlet tubing picture 1 3 7 Note In case quick coupler is used for the connection please press the front retainer ring inward and pull out f Remove small outlet filter and rinse with clean water picture 1 3 8 Check to ensure the filter net is in good condition otherwise replace with new one Wipe off the dirt on the tank walls g Put back in place all parts THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 12 THE ULTRA SERIES USER MANUAL 1 4 Cleaning of Front filtration system a Keep pressing POWER to switch off power Open front bottom cover picture 1 4 1 b Pull out water outlet tubing from the outlet connector of 2nd stage filter picture 1 4 2 c Pull out water inle
24. is full of water 2 6 Keep pressing HOT to unlock and press to release 2 L of water each from the faucet Shut down the unit Drain off all remaining water from the hot water drain outlet at the back picture 2 6 2 7 Repeat the above steps in 2 5 and 2 6 in order to clean the remaining solution from the top tank It is suggested to perform the same operation twice 14 THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 3 Replacement 3 1 Replacing a filter a Keep pressing POWER to shut down the unit picture 3 1 1 remove the front panel with both hands from the bottom picture 3 1 2 b Replace the carbon filter by pulling out tubing at both ends picture 3 1 3 3 1 4 c Replace RO membrane by pulling out tubing removing cartridge cover removing the membrane and replacing with new one picture 3 1 5 3 1 6 3 1 7 3 1 8 d Replace front panel Note 1 We recommend you replace each filter one by one in order 2 When replacement is done please clean the filtration system as per FILTRATION CLEANING 3 2 Replace the top U V a Switch off the unit and unplug power cable from the electrical outlet before replacement Picture 3 2 1 b Open top cover picture 3 2 2 c Remove screws on top end picture 3 2 3 e Disconnect U V connection pin picture 3 2 4 and pull out U V bulb picture 3 2 5 f Replace with new bulb and replace top cover picture 3 2 6 15 THE ULTRA SERIES USER MANUAL 3
25. o prevent any metal contamination and improve the water production and taste efficiency h Advanced Electro kinetic Air Filtration system The first filter that air passes through before being condensed and converted to water is our Advanced Electro kinetic patented and UL listed Air Filtration system effectively prevents micro particles pollen and dust from entering the machine as well as preventing virus bacteria slime fungus growth and VOC Contaminates i Ultraviolet Filtering treatment systems The proprietary ultraviolet lamp treats the water for sterilization to ensure that all bacteria and micro organisms are eliminated The reflux sterilization process is controlled by a digital micro computer automatically by 3 three ultraviolet lamp systems Multi Stage Filtration System Our dedication to providing the highest quality greatest tasting water our world consumers is accomplished by our unique 15 multi facetted stages of filtration and sanitization systems 1 LF2 Carbon Filter or Nanometer Molecular Sieve Removes ammonia chlorine residuals organic compounds soil particles dirt dander pollen etc 2 Sediment filter Removes micro particles to protect water pump 3 Pre Carbon Filter Removes organic compounds free chlorine heavy metal etc 4 Pre Carbon Filter Il Removes organic compounds free chlorine heavy metal etc 5 Reverse Osmosis Membrane Removes dangerous bacteria virus mineral salt heavy metal
26. ress COOL to lower the value Hot water adjustment range 75 C 93 C To adjust the cool water temperature setting press C F again to have the Cool water temperature display indicate the current setting Then press the HOT or COOL button to adjust the setting Press HOT to raise the setting value press COOL to lower the value Cool water adjustment range 4 C 10 C 7 When the filtration system is ready for replacement REPLACE on display will blink to remind the user to clean or change filters Please refer to Filter Replacement for details When cleaning or replacement is done keep pressing RESET till REPLACE indicator stops blinking Press RESET again to turn off REPLACE indicator and to reset the replacement warning time 8 The system will enter defrosting status and the DEFROST indicator on the screen will blink when the environmental temperature is too low If it is required to check the current defrosting temperature keep pressing COOL to show defrost temperature F at the position of humidity level on the screen 9 Press button to dispense cool water To dispense hot water keep pressing LOCK button till the HOT indicator blinks and makes a beeping sound then press 1 button to get hot water 10 not be alarmed when your machine turns off automatically To conserve energy your machine has been fitted with an electronic sensor which automatically switches the machine off when the storage tank is full AND CAN NOW FILL AN EXTER
27. stem may power down or shut off Solutions Keep pressing the POWER button and unplug the power cord Check that the tubing on the filtration system All fittings are 2 wrench tight and tubing is quick connect push in secure fittings Check that the tubing to the bottom tank is tight and secure Check that the drain tubing at the back is tight and secure Check that the water collector is in correct position Problem Remaining water cannot be drained from the back outlets when cleaning top tank and hot water tank Solutions Check water stopper inside the water drain outlet and be sure it is removed Problem There is a burning smell from the machine and meanwhile the hot temperature indicator has exceeded the preset Solutions Keep pressing the POWER button and immediately unplug the power cord Stop draining immediately if you are draining operation from the back to continue draining until hot water temperature is normal Problem Water output from faucet is too small Solutions Clean the filter net inside the water faucet or replace with new one Replace with new check valve inside water faucet Problem No hot or cool water output but ambient water only Solutions The heating function will be activated only when the top tank water level on the screen is above two levels The cooling function will be activated only when top tank water level screen is above three lev
28. t tubing from the inlet connector of 3rd stage filter picture 1 4 3 d Connect the outlet of the 2nd stage filter to the inlet of the 3rd stage filter with the tubing picture 1 4 4 e Pull out outlet tubing from the outlet of 3rd stage filter picture 1 4 5 f Connect the outlet of the 3rd stage filter to a water tank with tubing picture 1 4 6 g Pull out bottom tank picture 1 4 7 remove filter cup picture 1 4 8 and rinse the filter cup with clean water Replace the cup Fill the bottom tank with city water h Switch on power and start cleaning the filtration system Keep checking the water level of the bottom tank and fill with water until clean water comes out i Replace all the parts to original positions picture 1 4 9 making sure all connections are tight to prevent leakage j Disconnect the tubing from the RO inlet picture 1 4 10 Remove RO cover picture 1 4 11 Insert RO membrane into the cartridge picture 1 4 12 Pay attention to the inserted directions m Press the membrane to the end picture 1 4 13 n Replace the cover and tubing picture 1 4 14 o Replace the front panel picture 1 4 15 Switch on the unit and start cleaning the RO THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 13 THE ULTRA SERIES USER MANUAL membrane by automatic running or by filling city water into the bottom tank until the top tank is full of water p Press and keep pressing HOT to unlo
29. ult warning 6 UV bulbs two EL E005 UV lite THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS 10 THE ULTRA SERIES USER MANUAL Note 1 The above recommended service timing is for reference only 2 After a long period of service 24 to 36 months we recommend that you replace ALL the filters to ensure that your unit will always produce the cleanest and purest drinking water effectively Electronic Control Center Panel 5 Stage Sterilizing Micro Particle Air Filter System Hot water drain Drip tray collector Bottom tank drain amp external tank filling Pre silver or Carbon Filter Pre Carbon Filter H II HA a Silver Post Carbon Sterilizer M Ceramic Mineralizer for perfect PH iy ee outlet ant IU Cem nos 77 UNES an o i City Water Input Reverse Osmosis TERT p Bottom Tank Membrane The above structure and filtration system is for reference only custom units differ also custom Sparkling Silver Mineral or Soda water customizations also available with a flip of a switch No external tanks needed 1 Cleaning THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS H THE ULTRA SERIES USER MANUAL 1 1 Cleaning of Air Filter Please clean air filter regularly according to the air pollution situation in order to ensure proper air supply Take off air filt
30. unit to power will damage the compressor and void the warranty 3 Plug into a grounded electrical outlet with no more than 15 Amp breaker or fuse and no less the 10 Amp breaker or fuse 4 For the first operation it is recommended to fill city water into the bottom tank until the top tank water level on the screen indicates 3 levels Then drain one liter of water each by pressing Cool and Hot buttons Drain off all remaining water from the back HOT Water Drain outlet This sets the filters and removes any particles from carbon filters and is done every time a set of filters are replaced C OPERATIONAL STAGE 1 When the unit starts to operate you should be able to hear a The light on the VFD should also be lit The compressor will run in 2 minutes and you will see that the corresponding light on the VFD is lit If the unit is required to be shut off keep pressing POWER button Press POWER again to switch it on 2 Do not be alarmed when you do not obtain hot or cold water during the first few days of operation Only when the water level in the machine reaches a proper position will the heating cooling mechanism be triggered Generally the first heating cooling will start in ten to twenty hours during the first operation depending on local temperature and humidity conditions 3 When there is enough water in your machine you can press the HOT key on the panel to switch on or off the heating process The red
31. xer should be mounted to the unit 12 Do not place any object on top of the machine Good ventilation is required to ensure optimum performance N IV MAINTENANCE ALways keep the unit clean Wipe the outer casing with soft damp fabric to clean Use water to clean avoid using harsh cleaning agent 1 Do not use cleaning agent to clean storage tanks 2 Clean air filters regularly to ensure proper air flow Always drain out the remaining water from the tanks before a period of long inactivity Around the kitchen It is important to be aware that your Water Precipitation Generator is a humidity and temperature driven system This means the machine totally depends on the level of humidity in the air and the temperature to produce water Ideally the humidity level should be at least 23 or above to achieve the machine s optimum performance levels In places with lower humidity levels to 15 the machine will still produce water not as much nor as quickly but will still fill the tanks as in places with high levels of humidity In the household or office environments the higher level of humidity tends to be area near an open window or in rooms that are more spacious But it is recommended to close all air conditioning vents in an air conditioned room or close the heating vents and to open the window to ventilate the room to keep the humidity higher as air conditioning steals 45 of the humidity as does electrical and gas heating systems gas mu
Download Pdf Manuals
Related Search