IFO2175-830 Series
Contents
1. gt Allocate IRQ to PCI VGA This item allows BIOS to choose an IRQ to assign for the PCI VGA card Here are the options for your selection No AMI BIOS Setup Utility 49 IFO21 75 830 Series Panel PC User s Manual and Yes gt Palette Snooping Some old graphic controllers need to snoop on the VGA palette and then map it to their display as a way to provide boot information and VGA compatibility This item allows such snooping to take place Here are the options for your selection Disabled and Enabled gt PCI IDE BusMaster This item is a toggle for the built in driver that allows the onboard IDE controller to perform DMA Direct Memory Access transfer Here are the options for your selection Disabled and Enabled gt OffBoard PCI ISA IDE Card This item is for any other non onboard PCI ISA IDE controller adapter There are several options for your selection gt 1RQ3 4 5 7 9 10 11 14 15 These items will allow you to assign each system interrupt a type depending on the type of device using the interrupt The option Available means the IRQ is going to assign automatically Here are the options for your selection Available and Reserved gt DMA Channel 0 1 3 5 6 7 These items will allow you to assign each DMA channel a type depending on the type of device using the channel The option Available means the channel is going to assign automatically Here are the options for your selection Availab2. AK AXIOMTEK IFO2175 830 Series All In One 17 Super Slim amp Fanless Panel Computer User s Manual Disclaimers This manual has been carefully checked and believed to contain accurate information AXIOMTEK Co Ltd assumes no responsibility for any infringements of patents or any third party s rights and any liability arising from such use AXIOMTEK does not warrant or assume any legal liability or responsibility for the accuracy completeness or usefulness of any information in this document AXIOMTEK does not make any commitment to update the information in this manual AXIOMTEK reserves the right to change or revise this document and or product at any time without notice No part of this document may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of AXIOMTEK Co Ltd Copyright 2010 AXIOMTEK Co Ltd All Rights Reserved May 2010 Version A2 Printed in Taiwan Safety Approvals Y CE Marking FCC Class A FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are meant to provide reasonable protection against harmful interference in a residential installation If not installed and used in accordance with proper instructions this equipment might generate or radiat
3. Step 6 Install the HDD bracket inside the system Plug the SATA and Power cables in HDD Step 7 Close the back cover to the chassis and fasten all screws 16 Hardware Installation IFO21 75 830 Series Panel PC User s Manual 2 3 CF Card Installation The IFO2175 830 series provides one CF slot for users to install CompactFlash card Please refer to the following instructions for installation Step 1 Turn off the system and unplug the Power cord Step 2 Locate and release these screws to open the back cover Hardware Installation 17 IFO21 75 830 Series Panel PC User s Manual Step 3 Please open the back cover by lifting the joint part as marked Step 4 Unplug the CD ROM Power cord if IFO2175 830 is with CD ROM version 18 Hardware Installation IFO21 75 830 Series Panel PC User s Manual Step 5 Locate the CompactFlash socket and insert the card into the socket Hardware Installation 19 IFO21 75 830 Series Panel PC User s Manual Step 6 Plug the CD ROM Power cord if FO2175 830 is with CD ROM version AS Step 7 Close the back cover to the chassis and fasten all screws 20 Hardware Installation IFO21 75 830 Series Panel PC User s Manual 2 4 Serial Ports Interface The IFO2175 830 series has two onboard serial ports COM1 RS 232 422 485 and COM2 RS 232 The following table shows you the pin assignments of this connector ata caverta 000 6 aa SetReady o
4. USB 2 0 x 2 AUDIO LINE OUT USB 2 0 x 2 COM 3 RS 232 COM 4 RS 232 lt Q NO NA BEA WS CS gt Introduction 7 IFO21 75 830 Series Panel PC User s Manual 1 6 Packing List The package bundled with your IFO2175 830 should contain the following items IFO2175 830 Series Unit x 1 12VDC w AC DC Power Adaptor Power Cord x 1 CD x 1 For Driver and User s Manual DVD combo Cover x 2 For within DVD combo option SATA cable x 1 Cable Management Kit x 2 Fuse x 1 Wall Mount Bracket x 1 M4 x 8 Screws x 4 for VESA Mounting M3 x 5 Screws x 2 for Cable Management Kit If you can not find this package or any items are missing please contact AXIOMTEK distributors immediately 8 Introduction IFO21 75 830 Series Panel PC User s Manual MEMO Introduction 9 IFO21 75 830 Series Panel PC User s Manual CHAPTER 2 HARDWARE INSTALLATION The IFO2175 830 Series are convenient for your various hardware configurations such as CPU Central Processing Unit and HDD Hard Disk Drive The chapter 2 will show you how to install the hardware It includes 2 1 DRAM Installation The IFO2175 830 provides one 200 pin DDR2 SODIMM sockets that support system memory up to 2GB Please follow steps below to install the memory modules Step 1 Turn off the system and unplug the Power cord Step 2 Locate and release these screws to open the back cover 10 Hardware Installation IFO21 75 830 Series Pan
5. OPERATION TEMPERATURE 02C 40 C 32 F 104 F ENVIRONMENTA RELATIVE HUMIDITY 10 95 NON L CONDESING SHOCK 10G PEAK ACCELERATION 11 SEC DURATION CERTIFICATION Y NOTE All specifications and images are subject to change without notice Y may NOTE If it is operated in high temperature environment the wide temperature DRAM and HDD are recommended A Introduction IFO21 75 830 Series Panel PC User s Manual 1 4 Dimensions The following diagrams show you dimensions and outlines of the IFO2175 830 Series Ui M E DA NG A Ee El e G 3 5 o e a A A me V D Y N 9 A __ PS PN 0 o c 7 R Introduction 5 IFO21 75 830 Series Panel PC User s Manual 1 5 1 0 Outlets The following figures show you the locations of the IFO2175 830 Series O outlets Camera 6 Introduction IFO21 75 830 Series Panel PC User s Manual gt WO Outlets VOLUME ADJUST BUTTONS POWER LED POWER SWITCH DC IN POWER CONNECTOR COM 1 RS 232 422 485 COM 2 RS 232 ETHERNET
6. s back cover If opening the cover for maintenance is a must only a trained technician is allowed to do so Integrated circuits on computer boards are sensitive to static electricity To avoid damaging chips from electrostatic discharge observe the following precautions e Before handling a board or integrated circuit touch an unpainted portion of the system unit chassis for a few seconds This will help to discharge any static electricity on your body e When handling boards and components wear a wrist grounding strap available from most electronic component stores Classification N Degree of production against electric shock not classified Degree of protection against the ingress of water IPX1 Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide Mode of operation Continuous Type of protection against electric shock Class equipment General Cleaning Tips You may need the following precautions before you begin to clean the computer When you clean any single part or component for the computer please read and understand the details below fully 1 When you need to clean the device please rub it with a piece of dry cloth 2 Be cautious of the tiny removable components when you use a vacuum cleaner to absorb the dirt on the floor 3 Turn the system off before you start to clean up the component or computer 4 Never drop the components inside
7. specifies the power conserving state that the hard disk drive enters after the specified period of hard drive inactivity has expired The default setting is Suspend down mode This option cuts the power to the hard disk drives during a system suspend This is the default setting gt Suspend Time Out Minute This option specifies the length of time the system waits before it enters suspend mode The default setting is Disabled suspend mode This is the default setting suspend mode after being inactive for 1 minute Set this item to allow the computer system to enter suspend mode after being inactive for 10 minutes Set this item to allow the computer system to enter suspend mode after being inactive for 4 minutes gt Throttle Slow Clock Ratio Use this item to specify the speed of the system clock when running the power saving states gt Power Button Mode This option specifies how the externally mounted power AMI BIOS Setup Utility 43 IFO21 75 830 Series Panel PC User s Manual button on the front of the computer chassis is used The default setting is On Off Pushing the power button turns the computer On Off on or off This is the default setting This is the default setting Pushing the power button places the computer in Suspend mode or Full On power mode Advanced Resume Event Controls gt Resume On Ring This item enables or disables the function of Resume On Ring that resumes the s
8. Configuration You can use this screen to select options for the APM Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY nagement APM Enabled node gt Power Management APM Set this item to allow Power Management APM support The default setting is Enabled Set this item to prevent the chipset power management and APM Advanced Power Management features Set this item to allow the chipset power management and APM Advanced Power Management features This is the default setting gt Video Power Down Mode This option specifies the Power State that the video subsystem enters when the BIOS places it in a power saving state after the specified period of display inactivity has 42 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual expired The default setting is Suspend This setting prevents the BIOS from initiating Disabled any power saving modes concerned with the video display or monitor This option places the monitor into suspend mode after the specified period of display inactivity has expired This means the monitor is not off The screen will appear blacked out The standards do not cite specific power ratings because they vary from monitor to monitor but this setting use less power than Standby mode This is the default setting gt Hard Disk Drive Power Down Mode This option
9. FO21 75 830 Series Panel PC User s Manual 3 8 Chipset Menu The Chipset menu allows users to change the advanced chipset settings You can select any of the items in the left frame of the screen to go to the sub menus e North Bridge Configuration South Bridge Configuration For items marked with gt please press lt Enter gt for more options BIOS SETUP UTILITY North Bridge Configuration 58 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual e North Bridge Configuration BIOS SETUP UTILITY DRAM Frequency Auto gt DRAM Frequency This item allows you to control the Memory Clock gt Configure DRAM Timing by SPD This item can enable or disable DRAM timing by SPD Serial Presence Detect device which is a small EEPROM chip on the memory module containing important information about the module speed size addressing mode and various parameters gt Boot Graphic Adapter Priority This item allows you to select the graphics controller as the primary boot device gt Internal Graphics Mode Select This ttem allows you to select the amount of system memory used by the internal graphics device gt Video Function Configuration Press lt Enter gt for the sub menu for setting up video function AMI BIOS Setup Utility 59 IFO21 75 830 Series Panel PC User s Manual BIOS SETUP UTILITY DUMT Mode Select DUMT Model 60 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC Us
10. base I O port address and Interrupt Request address of serial port 2 The Optimal setting is 2F8 IRQ3 The Fail Safe setting is 2F8 gt Serial Port2 IRQ This item specifies the IRQ used by the serial port 2 gt Serial Port3 Address This item specifies the base I O port address and Interrupt Request address of serial port 3 gt Serial Port3 IRQ This item specifies the IRQ used by the serial port 3 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual gt Serial Port4 Address This item specifies the base I O port address and Interrupt Request address of serial port 4 gt Serial Port4 IRQ This item specifies the IRQ used by the serial port 4 AMI BIOS Setup Utility 39 IFO21 75 830 Series Panel PC User s Manual e Hardware Health Configuration This screen shows the Hardware Health Configuration and a description of the selected item appears on the right side of the screen BIOS SETUP UTILITY gt System Temperature CPU Temperature These items display the temperature of CPU and System Vcore etc 40 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual e ACPI Settings You can use this screen to select options for the ACPI Settings and change the value of the selected option A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY Suspend mode 51 Pos AMI BIOS Setup Utility 41 IFO21 75 830 Series Panel PC User s Manual e APM
11. ck side of chassis Use Screw B 30 Hardware Installation IFO21 75 830 Series Panel PC User s Manual Step 3 Fix the desktop stand firmly i Rear View Front View Hardware Installation 31 IFO21 75 830 Series Panel PC User s Manual MEMO 32 Hardware Installation IFO21 75 830 Series Panel PC User s Manual CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMI BIOS setup utility 3 1 Starting To enter the setup screens follow the steps below 1 Turn on the computer and press the lt Del gt key immediately 2 After you press the lt Delete gt key the main BIOS setup menu displays You can access the other setup screens from the main BIOS setup menu such as the Chipset and Power menus 3 2 Navigation Keys The BIOS setup utility uses a key based navigation system called hot keys Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process These keys include lt F1 gt lt F10 gt lt Enter gt lt ESC gt lt Arrow gt keys and so on Y YY Note Some of navigation keys differ from one screen to another Left Right The Left and Right lt Arrow gt keys allow you to select a setup screen Ay Up Down The Up and Down lt Arrow gt keys allow you to select a setup screen or sub screen E The Plus and Minus lt Arrow gt keys allow you to Plus Minus
12. configuration Select Discard Changes and Exit from the Exit menu and press lt Enter gt Select Ok to discard changes and exit gt Discard Changes Use this item to abandon all changes AMI BIOS Setup Utility 63 IFO21 75 830 Series Panel PC User s Manual 64 gt Load Optimal Defaults It automatically sets all Setup options to a complete set of default settings when you select this option The Optimal settings are designed for maximum system performance but may not work best for all computer applications In particular do not use the Optimal Setup options if your computer is experiencing system configuration problems Select Load Optimal Defaults from the Exit menu and press lt Enter gt gt Load Fail Safe Defaults It automatically sets all Setup options to a complete set of default settings when you select this option The Fail Safe settings are designed for maximum system stability but not maximum performance Select the Fail Safe Setup options if your computer is experiencing system configuration problems Select Load Fail Safe Defaults from the Exit menu and press lt Enter gt Select Ok to load Fail Safe defaults AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual CHAPTER 4 DRIVER INSTALLATION 4 1 System IFO2175 830 supports Windows XP Windows Vista to facilitate the installation of system driver please carefully read the instructions in this chapter before start installing 1 Insert D
13. d has been set If the password has been installed Installed displays If not Not Installed displays gt User Password This ttem indicates whether a user password has been set If the password has been installed Installed displays If not Not Installed displays gt Change Supervisor Password Select this option and press lt Enter gt to access the sub menu You can use the sub menu to change the supervisor password gt Change User Password Select this option and press lt Enter gt to access the sub menu You can use the sub menu to change the user 56 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual password gt Boot Sector Virus Protection This option is near the bottom of the Security Setup screen The default setting is Disabled Protection This is the default setting Select Enabled to enable boot sector protection It displays a warning when any program or virus issues a Disk Format command or attempts to write to the boot sector of the hard disk drive If enabled the following appears when a write is attempted to the boot sector You may have to type N several times to prevent the boot sector write Boot Sector Write Possible VIRUS Continue Y N The following appears after any attempt to format any cylinder head or sector of any hard disk drive via the BIOS INT 13 Hard disk drive Service Format Possible VIRUS Continue Y N Enabled AMI BIOS Setup Utility 57 I
14. e C State technology 36 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual gt Enhanced C States This ttem allows you to enable or disable any available enhanced C states C1E C2E C3E C4E and Hard C4E e IDE Configuration You can use this screen to select options for the IDE Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen For items marked with gt please press lt Enter gt for more options BIOS SETUP UTILITY ATAZIDE Configuration Compatible ri dun ee Y as Le DE Master gt Primary Secondary Third IDE Master Slave Select one of the hard disk drives to configure IDE devices installed in the system by pressing lt Enter gt for more options e SuperlO Configuration You can use this screen to select options for the SuperlO Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen AMI BIOS Setup Utility 37 IFO21 75 830 Series Panel PC User s Manual BIOS SETUP UTILITY Serial Porti Address 38 gt Serial Porti Address This item specifies the base I O port address and Interrupt Request address of serial port 1 The Optimal setting is 3F8 IRQ4 The Fail Safe default setting is 3F8 gt Serial Port1 IRQ This item specifies the IRQ used by the serial port 1 gt Serial Port2 Address This item specifies the
15. e radio frequency energy and cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following methods 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment to another outlet of a circuit that doesn t connect with the receiver 4 Consult the dealer or an experienced radio TV technician for help Shielded interface cables must be used in order to comply with the emission limits Safety Precautions Before getting started read the following important safety precautions 10 The IFO2175 830 Series does not come equipped with an operating system An operating system must be loaded first before installing any software into the computer Be sure to ground yourself to prevent static charge when installing the internal components Use a grounding wrist strap and place all electronic components in any static shielded devices Most electronic components are sensitive to static electrical charge Disconnect the power cord from the IFO2175 830 Series before any installation Be sure both the system and external devices are turned OFF A sudden surge
16. edia content display and HMI solutions Introduction 1 IFO21 75 830 Series Panel PC User s Manual 1 2 Features V 17 high brightness 380nits SXGA TFT LCD Intel Atom H N270 1 6GHz processor with FSB 533MHz onboard NEMA 4 12 IP65 compliant front bezel IPx1 whole enclosure Vv Fanless and noiseless operation Optional 1 3 mega pixels camera Vv Vv Vv V WV Optional wireless 802 11 b g antenna 13 System Specifications FRONT BEZEL PLASTIC ABS DISPLAY TYPE 17 SXGA TFT BRIGHTNESS l LCD PANEL RESOLUTION 1280 x 1024 VIEWING ANGLE E H V 1602 160 2 Introduction IFO21 75 830 Series Panel PC User s Manual CPU Intel Atom WV N270 1 6GHz processor with FSB 533MHz CHIPSET INTEL 945GSE ICH7M SUPPORTS 1 DDR2 MAIN SYSTEM SYSTEM SODIMM MEMORY UP TO MEMORY SC 1 x 2 5 SATA HDD DRIVE STORAGE BAY OPTIONAL 1 COMPACT OPTICAL DRIVE COMBO DRIVE 1 x RS 232 RS 422 RS 485 COM 1 SN x lt JJ G NM CA ND 1 x PS 2 MOUSE AND KEYBOARD 1 x AUDIO MIC IN LINE OUT 1 x 12V DC IN POWER CONNECTOR CAMERA i x 1 3 MEGA PIXELS CAMERA option RESISTIVE TYPE TOUCHSCREEN LIGHT TRANSMISSION 80 TOUCH LIFETIME 35 MILLION TOUCHES POWER SUPPLY 12VDC w AC DC POWER ADAPTOR 437 98mm 17 24 W x 76 5mm 3 01 D x 376 41mm 14 81 H WEIGHT 7 65kg 16 85 Ib 4 x USB 2 0 1x VGA 2 x 10 100 1000Mbps ETHERNET Introduction 3 IFO21 75 830 Series Panel PC User s Manual
17. eeeeseeeeeees 65 4 1 DY SION arasa bance and aa anne a nda aj TE hea ank a Na Tai 65 4 2 TOUCH SON o 66 NEE e tere ds ia 66 4 2 2 Driver Installation ese ceseecccesseeeeseeeseeeeeeseaeees 67 MEMO XI IFO21 75 830 Series Panel PC User s Manual CHAPTER 1 INTRODUCTION This chapter contains general information and detailed specifications of the IFO2175 830 Series Chapter 1 includes the following sections General Description Features System Specification Dimensions I O Outlets Package List 1 1 General Description The IFO2175 830 is an ultra slim panel computer equipped with 17 inch 300nits high brightness SXGA LCD display and supports superior Intel Atom H N270 1 6GHz processor with FSB 533MHz Powered by Intel 945GSE ICH7M core logic chipset this panel computer has better graphic performance The panel also supports Dual View and multiple I O options including 4 USB 2 0 4 RS 232 ports Furthermore the IFO2175 830 supports antenna for wireless 802 11 b g expansion The IFO2175 830 is designed to work with low noise low power consumption high reliability and high performance applications Besides excellent ID industrial design and user friendly interface design make the IFO21 75 830 perfect with super slim professional outlook better user interface and excellent protection at once This safe reliable amp user friendly panel computer can ensure customer s project success and best suited for PIO POS kiosk m
18. egacy USB Support Use this item to enable or disable support for USB device on legacy operating system The default setting is Enabled gt USB 2 0 Controller Mode Use this item to configure the USB 2 0 controller The default setting is HiSpeed gt BIOS EHCI Hand Off Enabling this item provide the support for operating systems without an EHCI hand off feature The default setting is Enabled AMI BIOS Setup Utility 47 IFO21 75 830 Series Panel PC User s Manual 3 5 PCI PnP Menu The PCI PnP menu allows users to change the advanced settings for PCI PnP devices BIOS SETUP UTILITY Clear NURAM 48 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual BIOS SETUP UTILITY Reserved Memory Size Disabled 2 gt Clear NVRAM Use this item to clear the data in the NVRAM CMOS Here are the options for your selection No and Yes gt Plug amp Play O S When the setting is No Use this item to configure all the devices in the system When the setting is Yes and if you install a Plug and Play operating system the operating system configures the Plug and Play devices not required for boot The default setting is Yes gt PCI Latency Timer This item controls how long a PCI device can hold the PCI bus before another takes over The longer the latency the longer the PCI device can retain control of the bus before handing it over to another PCI device There are several options for your selection
19. el PC User s Manual Step 3 Please open the back cover by lifting the joint part as marked Step 4 Open the back cover and find mainboard Hardware Installation 11 IFO21 75 830 Series Panel PC User s Manual Step 5 Push down latches on each side of the DIMM socket Step 6 Install the memory module into the socket and push it firmly down until it is fully seated The socket latches are levered upwards and clipped on to the edges of the DIMM 12 Hardware Installation IFO21 75 830 Series Panel PC User s Manual 2 2 Hard Disk Drive Installation The IFO2175 830 Series offers a convenient drive bay module for users to install HDD The system offers users one 2 5 Hard Disk Drive for installation Please follow the steps Step 1 Turn off the system and unplug the Power cord Step 2 Locate and release these screws to open the back cover Hardware Installation 13 IFO21 75 830 Series Panel PC User s Manual Step 3 Please open the back cover by lifting the joint part as marked Step 4 Locate the HDD socket as marked 14 Hardware Installation IFO21 75 830 Series Panel PC User s Manual Step 5 Use assembly parts to fix HDD with the bracket 1 HDD Bracket x1 2 2 5 inch Hard disk 3 Screw x 4 4 Assembly the HDD with the bracket SL ATTENTION Please follow the direction of Hard disk installation Hard disk PCB facesup Hardware Installation 15 IFO21 75 830 Series Panel PC User s Manual
20. er s Manual e South Bridge Configuration BIOS SETUP UTILITY USB Functions Enabled AMI BIOS Setup Utility 61 IFO21 75 830 Series Panel PC User s Manual 62 BIOS SETUP UTILITY gt USB Function This item allows you to enable or disable USB function gt USB 2 0 Controller This item allows you to enable or disable the USB 2 0 controller gt Audio Controller This ttem allows you to enable or disable the audio support gt SLP_S4 Min Assertion Width This item allows you to set the SLP_S4 Assertion Width gt Restore on AC Power Loss This item can control how the PC will behave once power is restored following a power outage or other unexpected shutdown gt PCIE Port Configuration This item allows you to set or disable the PCI Express Ports AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual 3 9 Exit Menu The Exit menu allows users to load your system configuration with optimal or failsafe default values O BIOS SETUP UTILITY save Changes and Exit gt Save Changes and Exit When you have completed the system configuration changes select this option to leave Setup and reboot the computer so the new system configuration parameters can take effect Select Save Changes and Exit from the Exit menu and press lt Enter gt Select Ok to save changes and exit gt Discard Changes and Exit Select this option to quit Setup without making any permanent changes to the system
21. evice There are two connectors on wireless LAN card One is MAIN and the other is AUX Connect antenna cable to MAIN connector on wireless LAN card AMA AN 79 qua a 4 o b ETSI 00120E ADC2E3 WMG2503 Step 8 Close the back cover to the chassis and fasten all screws 26 Hardware Installation IFO21 75 830 Series Panel PC User s Manual 2 6 Mountings Optional There are several mounting ways for the IFO2175 830 Series Wallmount VESA and Desktop mountings as below 2 6 1 Wallmount Optional The mounting for IFO2175 830 Series is Wallmount as below Step 1 Prepare all parts for installing the wallmount kit Step 2 Assemble the mallmount kit by using screws to fix the backplane 2 Hardware Installation 27 IFO21 75 830 Series Panel PC User s Manual 2 6 2 VESA Mount Optional The mounting for IFO2175 830 Series is VESA Arm as below Assemble the VESA Arm by using screws to fix the backplane 28 Hardware Installation IFO21 75 830 Series Panel PC User s Manual 2 6 3 Desktop Stand Optional The 1FO2175 830 Series provides you with an optional Desktop Stand that you can follow the steps below Step 1 Prepare the parts of desktop stand A Go O Cover aaa Hardware Installation 29 IFO21 75 830 Series Panel PC User s Manual Step 2 Assemble the desktop stand Fix the screws as marked on the bottom side of chassis Use Screw A Step 3 Fix the screws as marked on the ba
22. i change the field value of a particular setup item The lt Tab gt key allows you to select setup fields The lt F1 gt key allows you to display the General Help screen AMI BIOS Setup Utility 33 IFO21 75 830 Series Panel PC User s Manual The lt F10 gt key allows you to save any changes you have made and exit Setup Press the lt F10 gt key to save your changes The lt Esc gt key allows you to discard any changes you have made and exit the Setup Press the lt Esc gt key to exit the setup without saving your changes The lt Enter gt key allows you to display or change the setup option listed for a particular setup item The lt Enter gt key can also allow you to display the setup sub screens 3 3 Main Menu When you first enter the Setup Utility you will enter the Main setup screen You can always return to the Main setup screen by selecting the Main tab There are two Main Setup options They are described in this section The Main BIOS Setup screen is shown below BIOS SETUP UTILITY system Time e System Time Date Use this option to change the system time and date Highlight 34 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual System Time or System Date using the lt Arrow gt keys Enter new values through the keyboard Press the lt Tab gt key or the lt Arrow gt keys to move between fields The date must be entered in MM DD YY format The time is entered in HH MM SS for
23. le and Reserved 50 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual 3 6 Boot Menu The Boot menu allows users to change boot options of the system You can select any of the items in the left frame of the screen to go to the sub menus Boot Settings Configuration e Boot Device Priority Removable Drives Lan Boot Settings Configuration For items marked with gt please press lt Enter gt for more options BIOS SETUP UTILITY Boot Settings Configuration AMI BIOS Setup Utility 51 IFO21 75 830 Series Panel PC User s Manual e Boot Settings Configuration BIOS SETUP UTILITY Enab led gt Quick Boot Enabling this item lets the BIOS skip some power on self tests POST The default setting is Enabled gt Quiet Boot mantan Set this item to allow the computer system to display the POST messages Set this item to allow the computer system to display the OEM logo This is the default setting gt AddOn ROM Display Mode This item selects the display mode for option ROM The default setting is Force BIOS gt Boot Num Lock Use this item to select the power on state for the NumLock The default setting is On gt PS 2 Mouse Support This item determines if the BIOS should reserve IRQ12 for the PS 2 mouse or allow other devices to make use of this 92 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual IRQ Here are the options for your
24. mat 3 4 Advanced Menu The Advanced menu allows users to set configuration of the CPU and other system devices You can select any of the items in the left frame of the screen to go to the sub menus e CPU Configuration IDE Configuration e SuperlO Configuration Hardware Health Configuration e ACPI Configuration e APM Configuration MPS Configuration e PCI Express Configuration e USB Configuration For items marked with gt please press lt Enter gt for more options BIOS SETUP UTILITY CPU Configuration AMI BIOS Setup Utility 35 IFO21 75 830 Series Panel PC User s Manual e Configure advanced CPU settings This screen shows the CPU Configuration and you can change the value of the selected option BIOS SETUP UTILITY Max CPUID Value Limit Disabled LAE Holt gt Max CPUID Value Limit You can enable this item to let legacy operating systems boot even without support for CPUs with extended CPU ID functions gt Execute Disable Bit Capability This item helps you enable or disable the No Execution Page Protection Technology gt Hyper Threading Technology Use this item to enable or disable Hyper Threading Technology which makes a single physical processor perform multi tasking function as two logical ones gt Intel R SpeedStep tm tech This item helps you enable or disable the Intel SoeedStep Technology gt Intel R C STATE tech Use this item to enable or disable th
25. of power could ruin sensitive components that the IFO2175 830 Series must be properly grounded Make sure it is the correct voltage of the power source before connecting the equipment to the power outlet The brightness of the flat panel display will be getting weaker as a result of frequent usage However the operating period varies depending on the application environment Turn OFF the system power before cleaning Clean the system using a cloth only Do not spray any liquid cleaner directly onto the screen The IFO2175 830 Series may come with or w o a touchscreen Although the touchscreen is chemical resistant it is recommended that you spray the liquid cleaner on a cloth first before wiping the screen In case your system comes without the touchscreen you must follow the same procedure and not spray any cleaner on the flat panel directly Avoid using sharp objects to operate the touchscreen Scratches on the touchscreen may cause malfunction or internal failure to the touchscreen The flat panel display is not susceptible to shock or vibration When assembling the IFO2175 830 Series make sure it is securely installed Do not leave this equipment in an uncontrolled environment where the storage temperature is below 20 C or above 60 C lt may damage the equipment External equipment intended for connection to signal 11 input out or other connectors shall comply with relevant UL IEC standard Do not open the system
26. ontrol Panel pops out PenMount Control Panel Device Multiple Monitors Tools About P Fenmount Control Panel version 1 0 0 19 Installed Device s Device 0 PenMount 6000 USB Support E mail penmoLntitseed net tw Support Website http las Derpoumt corn Eu 4 Click the Standard Calibration button Appendix 67 IFO21 75 830 Series Panel PC User s Manual Device 0 PenMount 6000 USB Calibrate Setting Edge Compensation About Advanced Mode E Plot calibration data Standard Calibration Advanced Calibration Turn off EEPROM storage 5 Calibration To adjust the display with touch panel click Calibration and follow the calibrate point to do calibration there are five points on screen for calibration A Touch the red square 6 Press OK 63 AMI BIOS Setup Utility
27. respective owners viii Table of Contents Miete Wu ji Salty EE EE iii SAN PrecaUtionS tee eher deeler ee iv Classification ses V General Cleaning TIDS sasa akadi aia aaa ka aa aana sa Ba a baana aaa vi Scrap Computer Hecvchmg viii CHAPTER 1 INTRODUCTION ccccceesessennnnnnseseeeeeeeeeeseeeesooes 1 1 1 General DESCIIDTION sakarani a asa pana ag A 1 1 2 Features E 2 1 3 System Specifications issii 2 1 4 DIMENSION EE 5 1 5 Hate 6 1 6 PACKING LSU EE 8 1 7 Power Switch a oa SEAN ARIE eK CHAPTER 2 HARDWARE INSTALLATION cccceeeeeeeeeeeeees 10 2 1 DRAM NSA AON atin Ait he eae 10 2 2 Hard Disk Drive Installation c oooonccnninoo c 13 2 3 CF Card Installation sasen ewan eee nee eea eaaa eee 17 2 4 Serial Ports Interface 21 2 5 Wireless Module Installation Optional 23 2 6 Mountings Optional msc 27 2 6 1 Wallmount Optional oooocnnccnncccccnccnncnnnccnnnnnnos 27 2 6 2 VESA Mount Optional cooooonnccnnccccncnonnccnnncnnnnnnos 28 2 6 3 Desktop Stand Optional 29 CHAPTER 3 AMI BIOS SETUP UTILITY cceeeeeeeeeeeeseeees 33 3 1 Starin WEE 33 3 2 NAVIGATION Keys sica tiara fabian 33 3 3 Man Menta a a 34 3 4 e lee Bn LR EE 35 3 5 PGP OP MENU sex sense ene aa a Ga an oat a d a a 46 3 6 Boot Menu 51 3 7 Security CT 56 3 8 nee On EE 58 3 9 eebe 63 CHAPTER A DRIVER INSTALLATION cccceeeeeeee
28. river CD in the disk and select the IFO2175 830 Driver atep 1 Chipset mben a step 3 Gigabit Step 4 ACOY Step 5 Touch Step D Camera Step WiFi Pa titer ae Graphic Eee Andi Optional 2 Please follow folder Step 1 to Step 7 for IFO2175 830 driver installation Appendix 65 IFO21 75 830 Series Panel PC User s Manual 4 2 Touch Screen 4 2 1 Specification Power Consumption Standby Mode 13 4mA Active Mode 24 6mA VCC 5V Top sheet Panel Resistance 274 ohm Bottom sheet Panel Resistance 770 ohm Portrait Support 900 1800 and 2700 screen rotation 66 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual 4 2 2 Driver Installation The 1FO2175 830 Series provides a driver of the touch screen that users can install it under operating system Windows XP Windows Vista To facilitate this touch screen driver installation users should read the instructions in this chapter carefully before start the installation 1 Insert Driver CD and select the D IFO2175 830 Driver Step6 Touch Driver Win2000 XP setup exe a o o o se o E nnna nn Dos Driver Linux XFreeo Linux KEreenh ON b 2x Windows Windows 7 1 Window 95 Windows VLOL 336 Driver dace Driver Driver 2000 XP D Driver VII Driver Y2 1 98 Me Driv Windows CE Windows NT Driver Diver 1 0 04 2 Follow the installing procedure and press OK 3 Click Start menu and select PenMount Utilities and then a PenMount C
29. selection Auto Enabled and Disabled gt Wait For F1 If Error If this item is enabled the system waits for the F1 key to be pressed when error occurs The default setting is Enabled gt Hit DEL Message Display If this item is enabled the system displays the message Press DEL to run Setup during POST The default setting is Enabled e Boot Device Priority The Boot Device Priority screen specifies the the boot device priority sequence from the available devices BIOS SETUP UTILITY Ist Boot Device USB Generic STORAG AMI BIOS Setup Utility 53 IFO21 75 830 Series Panel PC User s Manual e Removable Drives Use this screen to view the removable drives in the system The BIOS will attempt to arrange the removable drive boot sequence automatically You can also change the booting sequence BIOS SETUP UTILITY ist Drive USB Generic STORAG 54 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual e Lan Boot Settings Configuration The Lan Boot Settings Configuration can enable or disable Lan Boot ROM to allow the system boot on LAN BIOS SETUP UTILITY Lan Boot ROM Disabled AMI BIOS Setup Utility 55 IFO21 75 830 Series Panel PC User s Manual 3 7 Security Menu The Security menu allows users to change the security settings for the system BIOS SETUP UTILITY Change Supervisor Password gt Supervisor Password This item indicates whether a supervisor passwor
30. sm 2 3 4 Data Terminal Ready DTR 9 Ring Indicator RI Ground GND OO looooo In addition COM1 can be set for RS 232 422 485 by jumper The jump setting is listed as below DA 53 4 7331 00E DUH 000 E ood OOO OOOO BA o Ba BS 4 2 Hardware Installation 21 IFO21 75 830 Series Panel PC User s Manual When COM1 is set to RS 422 or RS 485 the pin assignments are listed below 22 Hardware Installation IFO21 75 830 Series Panel PC User s Manual 2 5 Wireless Module Installation Optional You can follow the steps below to install an optional wireless module Step 1 Turn off the system and unplug the Power cord Step 2 Locate and release these screws to open the back cover Hardware Installation 23 IFO21 75 830 Series Panel PC User s Manual Step 3 Please open the back cover by lifting the joint part as marked Step 4 Open the back cover and find mainboard SBC87830 24 Hardware Installation IFO21 75 830 Series Panel PC User s Manual Step 5 The socket latches are clipped on to the edges of the Mini card Install wireless LAN card to the socket Step 6 There are two choices of antennas which are installed in IFO2175 830 series One is build in antennas The other is external antennas Please follow the steps Hardware Installation 25 IFO21 75 830 Series Panel PC User s Manual Step 7 Find the built in Antenna cable which is tied with other cables on the bottom of the d
31. the computer or get circuit board damp or wet 5 Be cautious of all kinds of cleaning solvents or chemicals when you use it for the sake of cleaning Some individuals may be allergic to the ingredients 6 Try not to put any food drink or cigarette around the computer Cleaning Tools Although many companies have created products to help improve the process of cleaning your computer and peripherals users can also use household items to clean their computers and peripherals Below is a listing of items you may need or want to use while cleaning your computer or computer peripherals Keep in mind that some components in your computer may only be able to be cleaned using a product designed for cleaning that component if this is the case it will be mentioned in the cleaning e Cloth A piece of cloth is the best tool to use when rubbing up a component Although paper towels or tissues can be used on most hardware as well we still recommend you to rub it with a piece of cloth Water or rubbing alcohol You may moisten a piece of cloth a bit with some water or rubbing alcohol and rub it on the computer Unknown solvents may be harmful to the plastics parts e Vacuum cleaner Absorb the dust dirt hair cigarette particles and other particles out of a computer can be one of the best methods of cleaning a computer Over time these items can restrict the airflow in a computer and cause circuitry to corrode yi e Cotton swabs Cot
32. ton swaps moistened with rubbing alcohol or water are excellent tools for wiping hard to reach areas in your keyboard mouse and other locations e Foam swabs Whenever possible it is better to use lint free swabs such as foam swabs WA Note We strongly recommended that you should shut down the system before you start to clean any single components Please follow the steps below Close all application programs Close operating software Turn off power switch Remove all device Pull out power cable AA SY Fe vil Scrap Computer Recycling If the computer equipments need the maintenance or are beyond repair we strongly recommended that you should inform your Axiomtek distributor as soon as possible for the suitable solution For the computers that are no longer useful or no longer work well please contact your Axiomtek distributor for recycling and we will make the proper arrangement Trademarks Acknowledgments AXIOMTEK is a trademark of AXIOMTEK Co Ltd IBM PC AT PS 2 VGA are trademarks of International Business Machines Corporation Intel and Pentium are registered trademarks of Intel Corporation MS DOS Microsoft C and QuickBASIC are trademarks of Microsoft Corporation VIA is a trademark of VIA Technologies Inc SST is a trademark of Silicon Storage Technology Inc UMC is a trademark of United Microelectronics Corporation Other brand names and trademarks are the properties and registered brands of their
33. ystem through incoming calls gt Resume On RTC Alarm You can set Resume On RTC Alarm item to enabled and key in Data time to power on system 44 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual e MPS Configuration This screen shows the MPS Multi Processor Specification Configuration and you can change its value A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY HPS Revision gt MPS Revision Use this item to select MPS Multi Processor Specification Revision 1 1 or 1 4 The default setting is 7 4 AMI BIOS Setup Utility 45 IFO21 75 830 Series Panel PC User s Manual e PCI Express Configuration This screen shows the PCI Express Configuration and you can change its value A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY Active State Power Managenent Disabled gt Active State Power Management Use this item to enable or disable the function of Active State Power Management to provide you with lower power consumption The default setting is Disabled 46 AMI BIOS Setup Utility IFO21 75 830 Series Panel PC User s Manual e USB Configuration You can use this screen to select options for the USB Configuration and change the value of the selected option A description of the selected item appears on the right side of the screen BIOS SETUP UTILITY Legacy USB Support Enabled gt L
Download Pdf Manuals
Related Search