INGEREV User Guide
Contents
1. is saved on the card as predefined but it is possible to modify it to any desired time E SELECT STARTING l TIME Pig 34 00 b The screen for the time selection of the deferred charge shows the Starting time highlighted over black background Press the ESC button to return to the option selection menu To modify the time press the buttons LA and D4 until you have reached the desired time Press OK to change to minutes and select them proceeding the same way as in the case of hours and when finished press K to change to seconds After selecting them press OK again The following informative screen will be displa yed Charging will begin at the selected starting time 6 At the time set for beginning charging the following screen is shown to indicate that the charging process has started correctly End of charging process F CHARGING _ E REMAINING E PRESENT START i CHARGING l o ENERGY Wh gt POWER W k A To conclude the charge cycle hold the card over the reader again The station will disconnect the power supply and unlock plug Mode 3 if this was the one being used Pull the plug out The station will revert to awaiting vehicle status Loss of power supply If the charging station should lose power during the charging process it will automatically unlock the Mode 32. RAN AIS L ITALIANO j 3 Hold the card over the reader under the display When the station recognizes the card correctly a menu for selecting the charge or for cancellation is displayed Press AN and to navigate between the e SELECT OPTION P IMMEDIATE CHARGE DEFERRED CHARGE CANCEL SESSION i Do not remove the plug during the charging process Immediate charge When the option immediate charge is E SELECT OPTION W highlighted press LOK IMMEDIATE CHARGE DEFERRED CHARGE The option deferred charge will only appear if it CANCEL SESSION is activated at the station E 4 A screen with a flashing plug is displayed Plug the cable into the appropriate outlet S 5 After connecting the vehicle to the station the following screen is shown to indicate that the charging process has started correctly CHARGING ENERGY Wh i POWER W gt g h al E Deferred charge When the option deferred charge is highlighted press LOK The option deferred charge will only appear if it is activated at the station p J SELECT OPTION ee IMMEDIATE CHARGE DEFERRED CHARGE CANCEL SESSION k a 4 A screen with a flashing plug is displayed Plug the cable into the appropriate outlet 5 Once the vehicle is connected to the station the time selection screen for deferred charging is displayed The time displayed
3. STATUS INDICATION INGEREV GARAGE Waiting for vehicle Waiting to charge Charging Low current Charging ended Error Fault Stand by INGEREV CITY Waiting for vehicle Waiting to charge Charging Low current Charging ended Error Fault Stand by Steady green Flashing green Steady green Flashing green Flashing green Steady red Steady red None Steady green Flashing yellow Steady blue Flashing blue Flashing yellow Steady red Steady red None The charging station is waiting for a vehicle to be plugged in for charging A user has held the card over the reader and the charging station is waiting for a vehicle to be plugged in A vehicle has been plugged into the charging station Only the green LED located at the top of the selected plug will light up Reduced current After charging the user has held the card and the charging station is in standby for the vehicle to be unplugged The charging process is not occurring properly due to some problem The charging station is not operating correctly The charging station has been disconnected remotely The charging station is waiting for a vehicle to be plugged in for charging A user has held the card over the reader and the charging station is waiting for a vehicle to be plugged in A vehicle has been plugged into the charging station Reduced current After charging the user has held the card and the charging st
4. ation is in standby for the vehicle to be unplugged The charging process is not occurring properly due to some problem The charging station is not operating correctly The charging station has been disconnected remotely NN UV g RENAULT s A es TUVRheinland rj e s1o5000 ao lS mM ON x WO oO oO QO O N lt x aa lt x nae t eE FEH MADE Oe RRR RORE Wig FHEAE x PRLE arreter o EARR Seas EEE KEE REWEECKY KAREKAU Bika EEA err KROEEEREECMERERAKEE i nanoen EnNNaRNNNNAEREN nug RORTODERENANENNRNEROORNKE a s unnnnnEnngENE RL Kani REBERSBRE res kk a ae ae eee 1 ee ee Inama Charging your ele Ingeteam Power Technology S A Energy Avda Ciudad de la Innovaci n 13 es 31621 SARRIGUREN Navarra Tel 34 948 28 80 00 Fax 34 948 28 80 01 electricmobility energy ingeteam com www ingeteam com INGEREV User manual INGEREV GARAGE 1 Make sure the station is in waiting for vehicle status with the following two screens being displayed alternately p 7 p 7 HOLD CARD NEAR TO START SESSION VO PRESS OK TO SELECT LANGUAGE E a 2 Press LOK to access the language selection menu for the charging session After accessing the language selection menu F LANGUAGE navigate between the various options pressing EE CASTELLANO N and D4 and L K on the appropriate ENGLISH language F
5. he station has an auxiliary power supply which allows it to continue basic operation in spite of power failure In this situation the unit will show the anomaly on the display AC FAILURE Identify again to unlock the door If the loss of power occurs while charging the station will lock the plug until re identification Upon identification the cover is released the plug can be removed and the station will shut down
6. plug if this was the mode selected and will remain inactive until the supply is restored Once power is restored the station automatically restarts and reverts to the status before the loss of power INGEREV CITY 1 Make sure the station is in waiting for vehicle status with the electric vehicle icon shown on the display 2 Hold the card over the reader located in the area indicated under the display 3 Ifthe card is read correctly the charging post goes into awaiting charge status The display will show a flashing plug icon 4 Lift the cover manually and plug the cord into the appropriate electrical outlet If the power output selected is the mode 3 plug one the latter is locked and the charging process begins automatically If the power plug selected is the mode 1 plug Schuko position the cable so that it comes out of the hole in the bottom centre of the socket allowing the cover to close shut When the cover is closed the station will be locked and the power supply will be switched on changing the status to charging End of charging process To conclude the charge cycle hold the card over the reader again The station disconnects the power supply and unlocks the socket cover or the plug Open the cover remove the plug and the cable and close the cover The station will lock the cover and revert to awaiting vehicle status Loss of power supply T
Download Pdf Manuals
Related Search