MYRA 140x140 cm - SpatiulConstruit.ro
Contents
1. e For the electrical connection of the hydromassage bathtubs earth connection is necessary e The cable connection of the hyrdomassage bathtubs should be applied as shown in the Figure e Check whether the yellow green earth cables bound with the metal parts BROWN PHASE BLUE NEUTRAL 220V YELLOW GREEN GROUND placed under the hydromassage L N Me bathtubs are connected to all legs Pump Dis Disinfection Tank Lid m Electronic Control Panel 3X Air Jets Aqua Soft Easy Transformer Waste If the bathtub is used without panels the following airing and access essi windows should be applied Blw Blower Water Jets R1 Access window min 400x400 mm xo l l CB Control Button Micro Water Jets R1 Airing and access window min 400x400 mm R2 Access window min 400x400 mm Ae Air Controller Di Underwater Light K R2 Airing and access window min 250x250 mm PB Push Button 8 Water Suction Filter R3 Airing and access window min 400x400 mm VitrA Bathtubs Co Cumhuriyet Mah 13 Sok No 10 Sekerpinar 41400 Gebze Kocaeli Turkey SE Tel 90 262 648 95 00 pbx Fax 90 262 658 85 94 always keeps the rights to make any changes on the product E mail vitrabathtubs export eczacibasi com tr eC E C Zaci ba S I October 2008 www vitrakuvet com tr2. indicated with stickers on the product e For shower enclosure applications single bodied bathtub tap should be used on the bathtub e The faucet should not be applied on the pump of the hydromassage bathtub e The spout should be min 15 cm if the faucets are installed to the wall e Handgrip application for this product is not available e For the cleaning of the acrylic bathtub look at the User Manual e Vaste connection fuse wall hangers and user manual are delivered with the product Faucet Applications Handshower 1400 Faucet Application Places Bath Filler 4 Holes Bath Filler 2 Holes Bath Filler one Hole gt VI mon The area where the waste outlet 50 mm can be placed in Ideal position of the waste outlet g 50 mm The end point of the waste outlet should not be cut out and should be left at least 50 mm above the surface The area 200 mm where the waste outlet should not be left Hot amp cold water inlet for the wall taps Hot amp cold water inlet for the taps on the bathtub Measures for electrical connection of whirlpool tubs There is no need to leave additional space for the silicone during the installation process It is enough to prepare the required area according to the size of the product Perspective Massage Systems Duo Maxi Duo Soft Aqua Maxi Aqua Soft IMPORTANT
3. MYRA 140x140 cm Size cm 140x140 Height cm 57 Weight kg 29 Front Panel Weight kg dA Side Panel Weight kg Volume It 200 Available massage systems Duo Maxi Duo Soft Aqua Maxi Aqua Soft Aqua Soft Easy Plan Front View e As shown in Figure Plan the wall hangers details A B are used to fix the product to the wall It is suggested to use the wall hangers to rigid the bathtub Detail A Detail B Points to Notice e An elbow and a waste connection hose of 50 mm will be delivered with the product but an edge lath and other accessories are not included e The place where the product will be installed should be straight e An airing and access window should be left if the hydromassage bathtub is installed without panels e The corner bathtubs should not be installed to an U shaped place e During the installation of the panels the adjustment of the leg set should be carried out according to the height of the panel e The electronical system is running with 220 volt with earth connection For its connection a 3x2 5 mm cable should be used e The product should be protected with an appropriate ampere fuse for Duo Maxi System 20 ampere for Duo Soft System 16 ampere for Aqua Maxi and Aqua Soft Systems 10 ampere and the amper fuse should be closed when it is not used e The faucet applications should be from the points shown in the drawings below which are
Download Pdf Manuals
Related Search