Digital High Definition Terrestrial Receiver SRT 8150
Contents
1. HDMI Changes the resolutions of video Switch HD type TV RADIO Switches between TV and Radio AV TV Selects the TV VCR STB receiver output or AUTO Automatic mode for the TV SCART output Numeric buttons Select the TV or Radio service channels and individual menu FAV Toggles the selected favorite mode SAT No function EPG Displays the TV or Radio program guide Electronic Program Guide TELETEXT Enables teletext mode AUDIO Changes the audio languages SUBTITLE Enables subtitle mode CH AV Changes channels or moves to the item in the menu VOL lt gt Adjust the volume or moves to left or move item in the menu MENU Displays the main menu on screen EXIT Returns to the previous menu or normal viewing mode from a menu www strong tv PART 1 o English STRONG DIGITAL TV 20 CH CH Changes channels up or down on normal mode 21 2 Moves up a page in the channel list Selects zoom In out 227 Moves down a page in the channel list 23 STOP Stops recording timeshift or playback 24 PAUSE Timeshift deactivated Pauses the playing picture or go again to normal mode Timeshift activated Starts the function Further it is used to pause the playback 25 RECORD Records the program 26 PLAY Starts the playback assumed that recording s were already done Then you can select a file from the Recording File List 27 REWIND Starts reverse playback and changes2. 3 TV SCART Connector Use this connector to connect your receiver with your TV set using a SCART cable 4 DVD VCR SCART Use this connector to connect your receiver to your video recorder using a SCART cable When receiver in stand by mode a video audio signals from your VCR will be looped through receiver to your TV set 5 Y Pb Pr Connects to Component jack of TV 6 VIDEO This connector has a constant video signal for additional VCR connections 7 Audio L R Outputs for Audio Left White and Right RED 8 S PDIF Coax and Optical Output for connecting to a digital audio amplifier 9 HDMI Connects to HDMI jack of TV 10 RS 232 Serial Port This serial port can be used to connect your PC to your receiver to download new software versions to your receiver 11 USB Connects to USB device 12 Power ON OFF Switch Powers on off 1 Uu Power Cord Your receiver reguires a current of 90 240 V AC Auto selectable 50 60 Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet www strong tv 5 STRONG PART 1 e English DIGITAL TV 2 3 Remote Control Unit STRONG DIGITAL TV 18 INFO Displays the program information box on the screen 19 V V Turns volume up or down 1 N 10 MUTE Enables or disables the audio POWER Switches the receiver between operation and standby mode RCL Selects the previously viewed channel
3. To restore backed up data 1 Select file UAD or UDB and press OK 2 List of possible actions will be displayed Make your choice and press OK to proceed 3 After updating data from selected file your receiver will reboot automatically in 3 seconds www strong tv 15 STRONG PART 1 English DIGITAL TV To format USB memory device Please press YELLOW Button Format A warning window will appear to get your confirmation of operation To delete file Press BLUE Button Delete A warning window will appear to get your confirmation of operation Tip When USB memory device is not inserted to the USB port OSD would not show any files 5 5 2 Calendar Use A V buttons to move to Calendar OK button The calendar will appear on screen Use AV AP buttons to move between days in a month or amp buttons to go previous or next Month Press EXIT buttons to return 5 5 3 Tetris Use A V buttons to move to Tetris and press OK button Before starting a game you will be prompt to select level Press numeric button to select a level which you want 1 15 and press OK lt gt Move block to left or right AV Drop block OK Rotate block Press EXIT buttons to exit from game 5 5 4 PDR Here you can adjust your preferred Record Size max duration of record and set Timeshift to ON or OFF 6 0 OTHER OPERATIONS 6 1 Program Guide EPG EPG shows the program schedule for the current channel Availability of EPG depends fro
4. Polarization If this product is used with a specified AC adapter the adaptermay be equipped with a polarized alternating current line plug a plug with one blade wider than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and then reinsert it Ifthe plug still fails to fit contact an electrician and have the receptacle replaced Protecting the Power Cord The power supply cord should be placed so it will not bewalked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords GENERAL PRECAUTIONS SAFETY PRECAUTIONS m Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the
5. To recall this banner during recording press the INFO button 3 During recording you can call up the Record Channel List by pressing the OK button to watch another Free To Air channel within the same transponder 4 To stop recording at any time press IM Stop button 5 If you want to delete recorded file s from the Recording File List press the RED delete or GREEN All delete button 6 4 2 Play 1 Press Play button in TV mode and the Recording File List will appear on screen 2 Select with the A V buttons the file you want to watch and start playback by pressing OK 3 You can activate Fast Forward or Fast Rewind during playback by pressing the 44 or button Another pressing of these buttons will change the speed FF x2 x4 x8 FR x1 x2 x4 x8 Press b Play button to continue playback at desired position 4 To choose a specific position or scene in the playback press INFO and select the desired position with the lt P buttons 5 To stop the playback press IM Stop button 18 www strong tv PART 1 English STRONG DIGITAL TV 6 4 3 Timeshift 1 Make sure that in PDR menu the Timeshift function is set to ON This can be adjusted in Application gt PDR menu 2 Press II Pause button in TV mode to start Timeshift The Recording Info banner appears and shows the recorded time 3 To continue watching the programme press Play button 4 Ifyou start Timeshift during recording the receiver
6. appear 5 1 Channel Organizer In MAIN MENU screen use AV buttons to select Channel Organiser then press OK or to enter the Channel Organiser menu which consists of the sub menus Sort Channels Add to Favourites and Edit Channels 5 1 1 Sort Channels In this menu you can sort channels by order or move channels to specified position 10 www strong tv PART 1 o English STRONG DIGITAL TV Note Channels are sorted in the selected channel list only Sorting of the channels in one i list do not change order of the channels in another list l e sorting of the channels in 1 Favourite list do not change order of the channels in list of all channels and vice versa Note Please note that channel sort function is not available if the setting for Channel 7 numbering Menu Terrestrial Search Terrestrial Settings is set to Operator defined Sort RED button Press RED button to select one of available sort options m Original Order the order of the channels will be restored to last stored order m Alphabet A Z or Z A channels will be sorted in alphabet order m Frequency Low High channels will be sorted in frequency order first channels with low frequency then with higher frequency m First FTA Free To Air channels will be placed at the beginning of the list Scrambled channels at the end m First scrambled Scrambled channels will be placed at the beginning of the list Free To Air channels at the end If
7. confirm selection Tip If you have changed TV type and Video on screen not appears in 15 seconds press i EXIT button 2 times Such a problem can appear ifyour TV do not supports video in NTSC format m Aspect Ratio Set accordingly to aspect ratio of your TV www strong tv 13 STRONG PART 1 o English DIGITAL TV Use A Y lt P buttons to select the item and press OK button to display the list of options use AY buttons to select Aspect Ratio then press OK button to confirm selection m Screen Control Use A Y lt P buttons to select the item and press OK button to display the list of options use AY buttons to select Aspect Conversion then press OK button to confirm selection m RGB YUV Selects a mode of video output signal Ifyou have connected your TV to receiver only by SCART cable then it is recommended to set RGB mode If you have connected your TV to receiver by HDMI or Component cable then this value must be set to YUV Use A Y lt P buttons to select the item and press OK button to display the list of options use AY buttons to select YUV or RGB mode then press OK button to confirm selection A WARNING If you have selected RGB mode then HDMI digital and YPbPr component outputs on the receiver would be disabled m Brightness Contrast Saturation Use A Y lt P buttons to select the item and press OK button to display the list of options use AV buttons to select level of Brightness Contrast Saturation then
8. current channel list and using navigation buttons select channel to be shown when the receiver will power on by timer event You can use TV R button to select between TV and Radio channels m Starting Time You can set the starting date or days of the week for the timer action Use Numeric buttons to enter the starting time of the timer action m Duration Use Numeric buttons to enter the duration of channel view when the Timer mode is set to Time Interval 5 5 Application This menu will help you to use USB Calendar Tetris Game 5 5 1 USB The Receiver is equipped with host controller Insert your USB memory device to USB connector Make sure that power consumption of your USB device is not higher than 500 mA In case your USB memory device power consumption is higher make sure to connect an external power supply to your memory device before connecting it to your receiver Usage of memory device with high power consumption may damage your receiver Select USB menu in application with AV and press OK If you would like to backup channels or software to USB memory 1 Press GREEN button and select type of data to store Channel data UDB will store only channels while All SW dates UAD will store software and channels 2 Select one item and press OK to proceed 3 Name of created file will be STB_ALL_MMDDhhmm UAD or STB DB MMDDhhmm UDB where MM month when file is created DD date hh hours mm minutes
9. press OK button to confirm selection 5 3 3 Time Setting To synchronise time in your receiver with broadcaster set GMT usage to ON select your time zone and set Summer time accordingly to season In some cases it is recommended to set GMT usage to OFF and setup date time manually 5 3 4 Parental Control In this menu you can set menu lock status Disabled or Enabled and change the PIN code Parental rate menu allows you to block watching content which is rated for age egual or higher then you have set in this menu Function of this feature depends from broadcast and STRONG would not take any responsibility if it doesn t work The default PIN code is 0000 5 3 5 System Information Displays the information about software version installed in the receiver 5 3 6 Factory Reset Use Factory Reset only when you want to return the receiver to the condition of factory default This will delete all user settings and installed channels 14 www strong tv PART 1 o English STRONG DIGITAL TV 5 4 Timer You can set the timer to make the receiver perform designated actions including timer based wake up or sleep instructions to the receiver m Timer Index Use the lt P buttons to select m Active Use lt P buttons to select among Power on Power off Duration Recording and OFF disable timer m Mode You can set the cycle of the action designated in the timer mode Once Daily or Weekly m Channel Type Press OK button to display
10. product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers m Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points m Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair work by a qualified technician 4 The product has been dropped or damaged in any way 5 The product exhibits a distinct change in performance Replacement Parts When replacement parts are required make sure that the authorized service center uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards m Safety Check Upon com
11. strong tv PART 1 o English STRONG DIGITAL TV Connectors ANT IN TOTV TV SCART RGB CVBS Audio L R Output with Volume control VCR Scart Input RGB CVBS Audio L R Output CVBS Audio L R HDMI V A Output Type A Version 1 0 RCA Output Audio L R amp Video Output Component Video Out YPbPr S PDIF Dolby Digital Out Coaxial Optical Data Interface serial port RS 232 9 Pin D Sub Male type USB 2 0 Type A Connector General Data Input Voltage Range 90 250 V AC 50 60 Hz Power Consumption max 40 W Power Consumption Standby max 12 1 W Operating Temperature 0 40 C Storage Temperature 10 50 C Operating Humidity Range 10 85 RH Non condensing Size W x D x H in mm 300 x 215 x 65 Weight 1 6 kg Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change CryptoWorks and Irdeto are trademarks of Irdeto Access B V Conax is a trademark of Telenor Conax AS Viaccess is a trademark of France Telecom all other product names are trademarks or registered trademarks of their respective owners STRONG 2009 All rights reserved 01 2009 www strong tv 21 STRONG PART 1 o English DIGITAL TV 22 www strong tv Environmental Issues STRONG ENVIRONMENTAL ISSUES STRONG is committed to reducing the impact of its products on the environment To maximise the benefit
12. the speed of reverse playback 28 F F Starts fast forward or fast motion playback and changes the speed of forward playback www strong tv 7 STRONG PART 1 English DIGITAL TV 3 0 CONNECTIONS 3 1 Connecting to Terrestrial antenna To receive the broadcast signal the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver Fig 3 TELEVISION 000 SI i if 90 250V 50Hz 60Hz OFF vw x RoHS Z CE Supplied by STRONG amp Co Japan DIGITAL AUDIO 6 AMPLIFIER SIEDE DVD VCR SCART COMPONENT VIDEO 3 2 Connecting to TV amp VCR Connecting by HDMI cable To fully enjoy your HDTV channels it is advisable to use HDMI or Component video outputs of your receiver Connect one end of HDMI cable to the HDMI output of your receiver and another end of cable to HDMI IN connector on your TV Connecting to component output 1 Make sure to use proper cable 3 RCA on each side of cable usually coloured as GREEN BLUE RED 2 Connect chinches at one side of the cable to Y Pb Pr GREEN BLUE RED outputs on your receiver and another side of the cable to corresponded inputs on your TV Very important to follow colour mark Connecting by SCART cables 1 Connect the TV SCART connector at the back of the receiver to the SCART IN connector on your TV set o
13. 8 A 1 TROUBLESHOOTING 19 A 2 SPECIFICATIONS 20 LU BS 0180 500 75 43 Z 0 14 Min from German wired line 0820 400 150 F 0 12 Min from Austrian wired line 2 E II 0826 029 928 0 14 Min from French wired line per June 2008 www strong tv L STRONG PART 1 English DIGITAL TV 1 0 INTRODUCTION 1 1 Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE FOR SERVICING Explanation of WARNING symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read the following instructions carefully WARNING TO REDUCE THE RISK OF FIRE ELECTRICAL SHOCK OR ANNOYING INTERFRERENCE DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE AND ONLY USE THE RECOMMENDED ACCESSORIES m Read All Instructions Before you use the product read all operating instructions For more information on accessories such as the lithium ion
14. STRONG Digital High Definition Terrestrial Receiver SRT 8150 DIGITAL TV STRONG 8 150 High Definition OB User Manual www strong tv TELEVISION 6060 90 250 V 50 Hzi60 He Mas 40 W A CAUTION DVDNCR SCART COMPONENT VIDEO SPDIF Supplied by STRONG 4 Co Japan DIGITAL AUDI L HDD AMELIEE seu use Fig 3 TELEVISION 90 250 v 50 HzlBb Ha Max 40 W Shohs E 2002 75 50 mmm S PDIF Supplied by STRONG amp Co Japan Fig 4 PART 1 o English STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INTRODUCTION 2 1 1 Safety Instructions 2 1 2 Storage 3 1 3 Equipment Set up 3 1 4 Features amp Accessories 3 2 0 YOUR RECEIVER 4 2 1 Front Panel 4 2 2 Rear Panel 5 2 3 Remote Control Unit 6 3 0 CONNECTIONS 8 3 1 Connecting to Terrestrial antenna 8 3 2 Connecting to TV amp VCR 8 3 3 Connecting to Digital Audio Amplifier 9 3 4 Connecting to computer by serial cable 9 3 5 Connecting to external USB Hard disk 9 4 0 STARTING UP FOR THE FIRST TIME 9 4 1 Language Selection 10 4 2 Terrestrial Settings 10 5 0 MAIN MENU 10 5 1 Channel Organizer 10 5 2 Terrestrial Search 12 5 3 Installation 13 5 4 Timer 15 5 5 Application 15 6 0 OTHER OPERATIONS 16 6 1 Program Guide EPG 16 6 2 Zapping and information banners 17 6 3 Channel list and view mode 17 6 4 PDR functions 1
15. arency Use A Y lt P buttons to select the transparency level and OK button to display the list m CAM messages To enable or disable displaying of messages from Conditional Access Module Disabling of CAM messages could be necessary in order to not disturb you while zapping through channels which can t be descrambled by your smart card m Power On Channel Use ATV lt P buttons to select the item If your choice is Fixed channel press OK button to display a channel list select a channel and confirm selection with OK button Your receiver will always start with defined channel If your choice is Last Viewed then receiver will awake with the last watched channel m S PDIF Use ATV 4 buttons to select the Digital audio mode PCM the receiver will downmix AC3 audio to PCM stereo Dolby the receiver will by pass AC3 audio for future decoding by Digital Audio Amplifier 5 3 2 TV Setting In this menu you can configure the TV setting such as HD type TV type Aspect Ratio Screen Control RGB YUV Brightness Contrast Saturation m HD type Use A Y 4 buttons to select the item and press OK button to display the list of options use AY buttons to select a video output resolution and press OK button to confirm selection Tip HD type is not selectable if output mode YUV RGB set to RGB m TV Type Use A Y lt buttons to select the item and press OK button to display the list of options use AY buttons to select TV Type and press OK button to
16. battery refer to the manuals provided with those products m Save These Instructions Save all safety and operating instructions for future reference m Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions m Follow Instructions Follow all instructions provided with this product m Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product m Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain m Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket table or cart Mount only on a stable tripod stand or bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer m Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company m Refer to instruction pages for information on using the product with a battery Grounding
17. channel channels The remote control does The batteries of the remote Check whether the batteries are inserted not work control are not inserted or correctly in your remote control Check exhausted the batteries and if exhausted replace the batteries in the remote control 19 www strong tv STRONG PART 1 English DIGITAL TV A 2 SPECIFICATIONS Demodulator DVB T Modulation Demodulation IF bandwidth Guard Interval Code rate Video Decoder Profile Level Input Rate Aspect Ratio Frame Rate Video Resolution Audio Decoder Audio Decoding Audio Mode Frequency Response Sampling Rate Tuner DVB T Connector type Frequency Rage Signal Level COFDM Spectrum Antenna supply System amp Memory COFDM QSPK 16 QAM 64 QAM 6 7 or 8 Mhz 1 4 1 8 1 16 1 32 1 2 2 3 3 4 5 6 7 8 MPEG 2 MP ML MP HL MPEG 4 H 264 AVC Max 90 Mbit s 4 3 16 9 Pan amp Scan Letterbox 25 Hz for PAL 30 Hz for NTSC 576p 720p 1080i MPEG 1 Layer 1 amp 2 Dolby Downmix Mono L R Stereo AC3 20 Hz 20 kHz lt 2 dB 60 Hz 18 kHz lt 0 5 dB 32 44 1 48 kHz Female IEC60169 2 75 Ohm nominal VHF 174 230 MHz UHF 470 862 MHz 78 5 dBm 25 dBm 64 QAM Code Rate 2 3 Guard Interval 1 8 Gaussian Channel COFDM 2K 8K Carrier 5 Volt DC Max 50 mA overload protected CPU STi7100 Flash Memory 8 MBytes System Memory 64 MBytes A V Memory 64 MBytes 20 www
18. ended and GREEN Signal buttons accordingly In Extended mode can be displayed short description of current program if available In Signal mode displayed technical information such as transponder parameters audio and video PIDs of current channel signal strength and quality 6 3 Channel list and view mode To call up on screen the current channel list press OK button from view mode Use A V lt buttons to select channel and press OK to switch to full screen view mode 6 3 1 Fast alphabet filtering Press RED Filter button to filter channels in alphabetical order The alphabet will be displayed at the right side Select first letter ofthe channel name that you need to find in the list and press OK 6 3 2 Selection of the list From view mode or channel list mode press FAV button to display the list of favourite groups Use AV buttons to select an item in the list and press OK to confirm selection To toggle between TV and Radio channels use TV RAD button Tip FAV will only be displayed if you have already added channels to a FAV list 6 3 3 Favorite list selection From view mode or channel list mode press FAV button and use AV buttons to select favourite group of your choice Press OK to confirm selection Tip If you want to exit from FAV mode press TV RAD button 6 3 4 Selection of Audio Language From view mode press the AUDIO button on your remote control Use lt P buttons to select an audio language from the list of a
19. eo RCA Accessories m x User Manual m 1x Remote control unit m 2x Batteries AAA type Note The batteries should not be recharged disassembled electrically short circuited or be i mixed or used with other types of batteries 2 0 YOUR RECEIVER 2 1 Front Panel 5060 WOo00000 ai POWER menu dk cuv ona vota voy Digital High Definitibn Terrestrial Receiver High Definition 123 4 5 67 8 1 POWER Switches the receiver power On and Standby 2 MENU Gets into Main Page screen 3 OK Executes the selected item 4 CH Up Down Channel up down or selects the item of Menu 5 VOL Up Down Volume up down or selects the item of Menu 6 Stand by LED Light up RED when receiver is in stand by mode Off when receiver is in awake mode 7 USB LED Light up GREEN when USB device is connected to USB connector at the back of the receiver 8 4 digits indicator In awake mode displays channel number In stand by mode displays current time 4 www strong tv PART 1 o English STRONG DIGITAL TV 2 2 Rear Panel 3 6 au Gi GO GO A Lt gt TV SCART sodio 7 SOdzi6dkz GG sa AE Des POWER CAUTION D 25 A Y RoHS E CE DVD VCR SCART COMPONENT Vileo T Supplied by STRONG amp Co Japan 2 4 526 9 11 1 ANTIN To connect the antenna cable to this connector 2 TO TV Gives you the possibility to connect an extra terrestrial receiver
20. keeps recording 5 You can activate Fast Forward or Fast Rewind during Timeshift by pressing the or buttons Another pressing of these buttons will change the speed FF x2 x4 x8 FR x1 x2 x4 x8 6 To choose a specific position or scene in Timeshift mode press INFO and choose the desired position with the lt P buttons 7 To leave Timeshift press IM Stop button A 1 TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact the dealer Don t open the receiver cover This may cause a dangerous situation and will void the warranty The 4 digits display on The power cord is not plugged Check that the power cord is plugged front panel does not in in to the wall outlet Make sure power light up switch on rear panel is in ON position No picture or sound Wrong connection of the Audio Connect the Audio Video output of the Video output of the receiver receiver to TV correctly to TV Audio muting Press the MUTE button TV power off Turn TV on No picture The receiver can t receive the Check the antenna cable replace the signal cable or connect the cable to the receiver tightly Incorrect values of channel Set the values channel parameters parameters correctly in installation menu You have switched to a Radio Press TV Radio to get back to TV
21. m and lt P buttons to change the value of the item With OK you can open the list to select your home country To continue installation press BLUE Save g Exit button At the next step of installation wizard you can adjust your terrestrial antenna for best reception condition Please use lt P buttons select channel number where digital terrestrial signal is available and adjust your antenna direction and position If necessary to get maximum levels on the signal strength and quality indicators You can check with your dealer on which channels digital terrestrial broadcast is available at your location Press BLUE Next button to continue to Digital Terrestrial TV scan once you are sure that signal strength and quality on the maximum At the end of installation process the receiver will switch to the first found TV channel Enjoy your TV and Radio channels Tip If your home country broadcaster supports LCN Logical Channel Numbering then please adjust channel numbering mode to Operator defined if you are not sure about this ask your local STRONG dealer If the LCN is not supported then please select Appearing order 5 0 MAIN MENU All the important settings and features of your receiver can be operated in Main Menu The Main Menu consists of following sub menus Channel Organizer Terrestrial Search Installation Timer and Application Press the MENU button when the menu is off the MAIN MENU screen will
22. m broadcast and may not be available for all channels In no menu state press EPG button the EPG Menu will appear Screen is divided to 3 main parts at the left channel list at the right program schedule list and bottom part provide short program description with program start end time In channel list Use AY buttons to choose the channel Use lt P to switch between channel list and program schedule In program schedule list Use A V buttons to choose program Use RED GREEN buttons to select previous next day of schedule Use lt P to switch between channel list and program schedule Use YELLOW button to display detailed program information Use BLUE button to programme timer for selected program 16 www strong tv PART 1 o English STRONG DIGITAL TV In program details Use A W to scroll information in the window Use EXIT to return to the list of programs 6 2 Zapping and information banners Zapping banner displayed automatically every time when you change channel in normal view mode It provides information about current channel list type carrier name time and date information channel number and name as well as current program name Information banner can be displayed by pressing to INFO button In addition to zapping banner it provides information about next program availability of subtitles and teletext on current channel Information banner can be toggled to Extended and Signal modes by pressing RED Ext
23. n To cancel your modifications press EXIT 5 1 3 Edit Channels In this menu you can edit channel name lock and delete channels www strong tv 11 STRONG PART 1 o English DIGITAL TV Edit Press RED button to edit name of the channel On screen will appear keyboard To delete current name select Backspace GREEN Button and press OK To enter new name use navigation and OK buttons To save new name press YELLOW Save or BLUE Save amp Exit button Channel name will be changed in all channel lists To cancel your modifications press EXIT Lock Lock function can be used in order to block access to some channels Press GREEN button to lock unlock channel of your choice Locked channel will be marked by Lock symbol In order to watch locked channel you will need to enter PIN code Channel will be locked in all channel lists Delete Pressing YELLOW button will mark selected channel to delete To unmark channel select it and press YELLOW button again Channel s will be deleted after you press BLUE button Be aware after pressing BLUE button channel s will be deleted from all channel lists To cancel delete operation you can press EXIT button Message Do you want to save will appear on screen Press EXIT to cancel or OK to confirm 5 2 Terrestrial Search The Terrestrial Search menu contains following sub menus Channel Setup and Terrestrial Settings In first order make sure that Terrestrial settings are cor
24. pletion of servicing or repairs ask the service technician toperform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable www strong tv PART 1 o English STRONG DIGITAL TV 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below Refer to the user manual of your TV and your antenna Make sure that Audio Video cables and outdoor components are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates
25. r connect Video RCA and Audio L R RCA connectors at the back of the receiver to corresponded inputs on your TV set 8 www strong tv PART 1 o English STRONG DIGITAL TV 2 Connect the VCR SCART connector ofthe receiver to the SCART IN connector on your VCR set Note Please make sure that your receiver is connected by SCART or 3 RCA cable Video Audio L R to your TV set when you connect your VCR or DVD to receiver You will not get video signal from your VCR DVD through the receiver if your receiver is connected only by HDMI or YPbPr connector to your TV set Fig 3 3 3 Connecting to Digital Audio Amplifier Connect S PDIF connector at the back of your receiver to appropriated input of your Digital Audio Amplifier Fig 3 3 4 Connecting to computer by serial cable Connect the RS 232 connector on the back of your receiver to the Serial port of your computer using a serial cable Instructions how to download software can be found on our website www strong tv support gt download However this receiver can download new system software from USB stick 3 5 Connecting to external USB Hard disk Switch on your external HDD connect the power adapter if applicable before you connect the USB connector at the back of your receiver After finishing the First Installation Cap 4 0 proceed with following steps 1 Unless the USB Hard disk is already formatted in FAT32 and recognised successfully for the first time
26. rect and corresponds to the country where you leave 5 2 1 Channel set up There are 2 possible ways of terrestrial channel search Auto Scan RED button and Manual Scan GREEN button m Manual Search Select one or several frequencies by OK button then Manual Scan GREEN button to search for channels on selected frequencies m AutoScan Press Auto Scan RED to scan all frequencies in the list On completing the search the receiver will save automatically the services information 5 2 2 Terrestrial settings Use AV lt buttons to select your Country Antenna Supply and Channel Numbering m Country With OK you can open the list to select your home country m Antenna Supply Select this option to ON in case you use active antenna powered through coaxial cable The receiver supply DC power 5 V into 50 mA load maximum m Channel Numbering select this option to Operator defined in case your operator provide logical channel numbering feature Otherwise select Appearing order 12 www strong tv PART 1 o English STRONG DIGITAL TV 5 3 Installation 5 3 1 Preference In this menu you can set up your personal preferences m OSD language Audio language Subtitle language Use A Y 4 buttons select the item and OK button to display the list m Banner Timeout To set banner duration how long information banner will be displayed on screen Use A Y 4 buttons select the item and OK button to display the list m Transp
27. s of our design enhancements your co operation is required Electronic product recycling Do not dispose of this product with your domestic rubbish At the end of its useful life this product contains materials which when processed correctly can be recovered and recycled By participating in the responsible recycling of this product you will be reducing the requirement for new raw materials and reducing the amount of material that would otherwise end up in landfill When you purchase a new similar product your retailer may offer to take this old one off you Alternatively you can take it to your local recycling centre Your retailer or local municipal authority will advise you of the collection facilities available for waste electronically products in your area User of this service will be free to you Within the scope of the European legislation on Waste Electrical and Electronic Equipment Directive 2002 96 EC valid as of August 2005 STRONG provides a recycling system free of charge for consumers to returning products after end of life For more information about STRONG s environmental policy to you www strong tv select About us and Environmental Policy from the submenu DIGITAL TV Packaging S on When disposing of this ss Ery 2 product packaging please ensure that it is recycled Packaging material is to be depolluted in waste separation Power Saving To save power and money please put
28. the product into standby mode when not in use We also recommend disconnection from mains supply when not in use for longer periods of time Batteries Do not dispose of the batteries AE from your handset with your domestic waste Where they are available participate in your local municipal or retailer collection schemes for spent batteries Batteries discarded in landfill sites or incinerated increases the chances of pollutants being dispersed into the atmosphere Alternations reserved 05 2009 www strong tv STRONG Environmental Issues DIGITAL TV www strong tv
29. vailable Use lt P buttons to select audio channel between Left Right and Stereo Press OK to confirm your selection Additionally you can select volume level for this channel www strong tv 17 STRONG PART 1 English DIGITAL TV 6 3 5 TELETEXT function In channel view mode press TEXT button If Teletext is available in several languages then select language from the list 6 3 6 Subtitles function In channel view mode press SUB button List of available subtitles languages will be displayed on the screen Use 4 buttons to select language and OK to confirm To disable subtitles select OFF from the list of the languages 6 4 PDR functions The software supports full range of PDR functionality The usage is based on your own risk Recording of HD signals reguires very high record speed Therefore the accurate function is depending on the used external USB device STRONG cannot guarantee for USB devices used Especially when Timeshift is activated at channels with high data rate STRONG cannot guarantee an accurate Playback of the Timeshift file Any risk of the PDR function usage shall not be passed to STRONG 6 4 1 Record 1 Select the desired TV channel you want to record Press the Record button on the remote control to start recording 2 Recording Info banner appears and shows the file name recording time and duration which can be adjusted in Application gt PDR menu It will disappear within OSD timeout interval
30. warning information TIPS Indicates any other additional important or helpful information 7 MENU Represents a button on the remote control or the receiver Bold Character Move to Represents a menu item within a window Italic Character 1 4 Features amp Accessories HDTV receiver for all digital Free To Air TV and Radio programmes via terrestrial antenna Exceptional bright and clear TV pictures and excellent sound in DVD quality High speed storage copy and loading function for channel list s and software from USB storage devices 5 000 channels memory capacity Display showing channel number or time 4 Favourite lists for TV and Radio Zoom functions for TV pictures Electronic TV Programme Guide for present following event information 7 Timers with 3 modes daily weekly once Teletext via receiver multi lingual subtitling and audio track support Parental lock function with rating control Quick and easy installation amp user friendly menu Multi lingual support on screen menu OSD USB 2 0 for USB storage devices Selectable output for 1080i 720p and 576p format Aspect ratio adjustment 4 3 16 9 Pan amp Scan Letterbox Software Update via USB 2 0 port and RS 232 www strong tv 3 STRONG PART 1 English DIGITAL TV m Digital sound through optical and coaxial output S PDIF m Fully DVB compliant supports MPEG 2 MPEG 4 and H 264 m Multiple Video Outputs HDMI Component Y Pb Pr SCART RGB CVBS Vid
31. you want to store new order of channels press YELLOW Save or BLUE Save amp Exit button If you do not want to store result of sorting press EXIT button Message Do you want to save will appear on screen Select NO to cancel or press OK to save result of channel sort Move GREEN button Press GREEN Move button to manual sort channels Use A V buttons to select channel that you want to move Press OK button to confirm channel selection You can select several channels to move them simultaneously Now you can select new position of the channel using A V buttons Press GREEN Move button to confirm new position of the channel Repeat these steps for all channels that you want to move To save new order of the channels press YELLOW Save or BLUE Save amp Exit button 5 1 2 Add to Favourites Enter to this menu in order to prepare lists of your favourite channels Use A V buttons to select channels of your choice Use lt P buttons to select favourite group where to add selected channel Press OK button to mark unmark channel to selected favourite group To rename Favourite group press RED button select group that you wish to rename and press OK On screen will appear keyboard To delete current name of the group select Backspace GREEN and press OK Select CAPS RED to toggle between Capital and small letters To enter new name use navigation and OK buttons To save new name press YELLOW Save or BLUE Save amp Exit butto
32. you will get a message to format your device to FAT32 in Application gt USB menu 2 In this menu press the YELLOW Format button on your remote control to confirm After 10 to 20 sec depends on HDD size formatting will be finished and you can leave the menu with the MENU or EXIT button 3 Go to Application gt PDR menu to adjust the preferred recording duration and set Timeshift to OFF or ON as desired 4 0 STARTING UP FOR THE FIRST TIME Ensure that your receiver is correctly connected to your television and terrestrial antenna Make sure terrestrial signals are of good quality Ask your local STRONG dealer to check your terrestrial installation or signal if you are not sure how to do this Confirm that the power plug of receiver is plugged into the wall outlet Turn on the receiver by power switch on rear panel The language section menu will be showing on your TV Screen It is recommended that you do first time installation following Installation Wizard step by step It will help you easily achieve system configuration and channel installation www strong tv 9 STRONG PART 1 o English DIGITAL TV Ifyou are advanced user then you can skip wizard by pressing EXIT button and set up channels using Installation menu 4 1 Language Selection Press OK to choose the language 4 2 Terrestrial Settings Select your Country Antenna Supply and Channel Numbering mode Use AV buttons to select an ite
Download Pdf Manuals
Related Search