Home

ECN-380-QM87_UMN_v1.00

1. Advanced 2012 American Megatrends Inc USB Configuration USB Devices 1 Keyboard 2 Hubs Legacy USB Support Enabled Enables Legacy USB support AUTO option disables legacy support if no USB devices are connected DISABLE option will keep USB devices available only for EFI applications DE Select Screen TJ Select Item Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit SCS Seit Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 10 USB Configuration USB Devices The USB Devices field lists the USB devices that are enabled on the system Legacy USB Support Enabled Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support Normally if this option is not enabled any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded When this option is enabled any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded onto the system ECN 380 QM87 Embedded System gt Enabled DEFAULT Legacy USB support enabled gt Disabled Legacy USB support disabled gt Auto Legacy USB support disabled if no USB devices are connected 4 3 9 iWDD H W Monitor The iWDD H W Monitor menu BIOS Menu 11 displays the CPU temperature an
2. 4 3 3 Trusted Computing Use the Trusted Computing menu BIOS Menu 5 to configure settings related to the Trusted Computing Group TCG Trusted Platform Module TPM h P e N En Integration Corp Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced ECN 380 QM87 Embedded System Configuration Enables or Disables BIOS support for security device 0 5 will not Current Status Information show Security Device NO Security Device Found TCG EFI protocol and INT1A interface will not be available gt Select Screen T J Select Item miss Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit FSC EXIT Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 5 Trusted Computing Security Device Support Disable Use the Security Device Support option to configure support for the TPM 2 Disable DEFAULT TPM support is disabled gt Enable TPM support is enabled Integration Corp 4 3 4 CPU Configuration ECN 380 QM87 Embedded System Use the CPU Configuration menu BIOS Menu 6 to view detailed CPU specifications and configure the CPU Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced CPU Configuration Intel R Core TM i5 4400E CPU 2 70GHz CPU Signature Microcode Patch Max CPU Speed Min CPU Speed CPU Speed PEOCeSSOGcO
3. gt Disabled Disable SATA controller SATA Mode Selection IDE Use the SATA Mode Selection option to configure SATA devices gt pe DEFAULT Configures SATA devices as normal IDE device gt AHCI Configures SATA devices as AHCI device gt RAID Configures SATA devices as RAID device La NOTE Before accessing the RAID configuration utility ensure to set the Option ROM Messages BIOS option in the Boot menu to Force BIOS This is to allow the Press lt CTRL 1 gt to enter Configuration Utility message to appear during POST Press Cirl l when prompted to enter the RAID configuration utility 4 3 6 Intel R Rapid Start Technology Use the Intel R Rapid Start Technology BIOS Menu 8 menu to configure Intel Rapid Start Technology support ECN 380 QM87 Embedded System Aptio Setup Utility Copyright C 2012 American Megatrends Inc Enable or disable Intel R Rapid Start Technology gt Select Screen T 4 Select Item Enter Select Change Opt ble Ceneral Help F2 Previous Values F3 Optimized Defaults F4 Save Exit Sie mlt Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 8 Intel R Rapid Start Technology Intel R Rapid Start Technology Disabled Use Intel R Rapid Start Technology option to enable or disable the Intel Rapid Start Technology function gt Disabled DEFAULT Intel Rapid Start Technology is disabled gt Ena
4. A WARNING Make sure a power supply with the correct input voltage is being fed into the system Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user Power on the system press the power button for 1 second Power off the system press the power button for 1 second ECN 380 QM87 Embedded System Power button Figure 3 15 Power Button ECN 380 QM87 Embedded System Chapter A BIOS Page 28 ECN 380 QM87 Embedded System 4 1 Introduction The BIOS is programmed onto the BIOS chip The BIOS setup program allows changes to certain system settings This chapter outlines the options that can be changed La NOTE Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice 4 1 1 Starting Setup The UEFI BIOS is activated when the computer is turned on The setup program can be activated in one of two ways 1 Press the DEL or F2 key as soon as the system is turned on or 2 Press the DEL or F2 key when the Press DEL or F2 to enter SETUP message appears on the screen If the message disappears before the DEL or F2 key is pressed restart the computer and try again 4 1 2 Using Setup Use the arrow keys to highlight items press ENTER to select use the PageUp and PageDown keys to change entries press F1 for help and press Esc to quit
5. AT im AEE BOTNE RA THOTT gt Bee BT gt GET FRAKK e ERR ABAB ORR Gi R i KME EDGE RE Pb Hg Cd CR VD PBB EE PBDE FA O O O O O O ER O O O O O O FN AHA O O O O O O RE O O O O O O BAR O O O O O O MGE O O O O O O Ha BENZ EE O O O O O O Fat O O O O O O O AVR E AAEE PTE SUT 11363 2006 FER BERLI r gt X TR TE EE EB ET PSI LT KE SUIT 11363 2006 EREM
6. Navigation keys are shown in the following table Increase the numeric value or make changes Integration Corp ee Esc key Main Menu Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu Exit current page and return to Main Menu General help only for Status Page Setup Menu and Option Page Setup Menu Load previous values Load optimized defaults Save changes and Exit BIOS Table 4 1 BIOS Navigation Keys 4 1 3 Getting Help ECN 380 QM87 Embedded System When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears To exit the Help Window press Esc or the F1 key again 4 1 4 Unable to Reboot after Configuration Changes If the computer cannot boot after changes to the system configuration are made CMOS defaults Use the jumper described in Chapter 4 4 1 5 BIOS Menu Bar The menu bar on top of the BIOS screen has the following main items Main Changes the basic system configuration Advanced Changes the advanced system settings Chipset Changes the chipset settings Boot Changes the system boot configuration Security Sets User and Supervisor Passwords ECN 380 QM87 Embedded System Save amp Exit Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu
7. Odd The parity bit is 0 if the number of ones in the data bits is odd Integration Corp ECN 380 QM87 Embedded System gt Mark The parity bit is always 1 This option does not provide error detection gt Space The parity bit is always 0 This option does not provide error detection Stop Bits 1 Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet Communication with slow devices may require more than 1 stop bit gt 1 DEFAULT Sets the number of stop bits at 1 gt 2 Sets the number of stop bits at 2 ECN 380 QM87 Embedded System 4 3 13 iEi Feature Use the iEi Feature menu BIOS Menu 17 to configure One Key Recovery function Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function Disabled system automatically within 10 min when OS crashes Please install Auto Recovery API service before enabling this function gt Select Screen PA Select Item nuse Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit BSES ae Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 17 iEi Feature Auto Recovery Function Disabled Use the Auto Recovery Function BIOS option to enable or disable the auto recovery function of the IEI One Key Re
8. Save amp Exit Main Reset the system after Discard Changes and Reset saving the changes RESET EE EEEE E Save as User Defaults Restore User Defaults Ge elece Sereen TL Select Item Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit t malt Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 26 Save amp Exit Save Changes and Reset Use the Save Changes and Reset option to save the changes made to the BIOS options and reset the system Discard Changes and Reset Use the Discard Changes and Reset option to exit the system without saving the changes made to the BIOS configuration setup program Restore Defaults Use the Restore Defaults option to load the optimal default values for each of the parameters on the Setup menus F3 key can be used for this operation Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options Page 67 Appendix A Safety Precautions Page 68 ECN 380 QM87 Embedded System A 1 Safety Precautions A WARNING The precautions outlined in this appendix should be strictly followed Failure to follow these precautions may result in permanent damage to the ECN 380 QM87 Please follow t
9. help to prevent ESD from damaging the board Self grounding Touch any grounded conducting material before handling the board During the time the board is handled frequently touch any conducting materials that are connected to the ground Use an anti static pad When configuring the ECN 380 QM87 place it on an antic static pad This reduces the possibility of ESD damaging the ECN 380 QM87 2 2 Unpacking Precautions When the ECN 380 QM87 is unpacked please do the following Follow the anti static precautions outlined in Section 2 1 Make sure the packing box is facing upwards so the ECN 380 QM87 does not fall out of the box Make sure all the components shown in Section 2 3 are present 2 3 Unpacki La ECN 380 QM87 Embedded System ng Checklist NOTE If some of the components listed in the checklist below are missing please do not proceed with the installation Contact the IEI reseller or vendor you purchased the ECN 380 QM87 from or contact an IEI sales representative directly To contact an IEI sales representative please send an email to sales iei com tw The ECN 380 QM87 is shipped with the following components Quantity Item and Part Number Image Standard 1 ECN 380 QM87 Series 1 Power Adapter 1 Power Cord Bj 2 Mounting brackets P N 41020 0396J4 00 RS ECN 380 QM87 Embedded System Standard 1 Utility CD One Key Recovery
10. CD ECN 380 QM87 Embedded System Installation Page 13 Integration Corp ECN 380 QM87 Embedded System 3 1 Installation Precautions During installation be aware of the precautions below Read the user manual The user manual provides a complete description of the ECN 380 QM87 installation instructions and configuration options DANGER Disconnect Power Power to the ECN 380 QM87 must be disconnected during the installation process or before any attempt is made to access the rear panel Electric shock and personal injury might occur if the rear panel of the ECN 380 QM87 is opened while the power cord is still connected to an electrical outlet Qualified Personnel The ECN 380 QM87 must be installed and operated only by trained and qualified personnel Maintenance upgrades or repairs may only be carried out by qualified personnel who are familiar with the associated dangers Air Circulation Make sure there is sufficient air circulation when installing the ECN 380 QM87 The ECN 380 QM87 s cooling vents must not be obstructed by any objects Blocking the vents can cause overheating of the ECN 380 QM87 Leave at least 5 cm of clearance around the ECN 380 QM87 to prevent overheating Grounding The ECN 380 QM87 should be properly grounded The voltage feeds must not be overloaded Adjust the cabling and provide external overcharge protection per the electrical values indicated on the label attached t
11. EA I gt x x N N 2 x USB 2 0 2x LAN Figure 1 4 ECN 380 QM87 Rear Panel VGA Line out gt 2 Q Q I Mic in Power 2 DC jack Power 1 DC in terminal block Integration Corp 1 7 Dimensions The physical dimensions are shown below al ID OD 289 3 LI JA re U ECN 380 QM87 Embedded System CO E 01 88060 gt i 10500000 a 266 7 L 150 L 273 7 73033 Figure 1 5 Physical Dimensions mm 172 12 J ECN 380 QM87 Embedded System Chapter 2 Unpacking Integration Corp ECN 380 QM87 Embedded System 2 1 Anti static Precautions A WARNING Failure to take ESD precautions during installation may result in permanent damage to the ECN 380 QM87 and severe injury to the user Electrostatic discharge ESD can cause serious damage to electronic components including the ECN 380 QM87 Dry climates are especially susceptible to ESD It is therefore critical that whenever the ECN 380 QM87 or any other electrical component is handled the following anti static precautions are strictly adhered to Wear an anti static wristband Wearing a simple anti static wristband can
12. ESC Exit System Time EEN Access Level Administrator Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 1 Main Page 32 ECN 380 QM87 Embedded System System Overview The BIOS Information lists a brief summary of the BIOS The fields in BIOS Information cannot be changed The items shown in the system overview include BIOS Information Processor Information Memory Information PCH Information SPI Clock Frequency The System Overview field also has two user configurable fields System Date xx xx xx Use the System Date option to set the system date Manually enter the day month and year System Time xx xx xx Use the System Time option to set the system time Manually enter the hours minutes and seconds 4 3 Advanced Use the Advanced menu BIOS Menu 2 to configure the CPU and peripheral devices through the following sub menus A WARNING Setting the wrong values in the sections below may cause the system to malfunction Make sure that the settings made are compatible with the hardware ECN 380 QM87 Embedded System Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced fed Boot Security Save amp Exit gt ACPI Settings System ACPI Parameters gt RTC Wake Settings gt Trusted Computing gt CHU Ceaaaigueatlon SSS gt SATA Configuration gt Intel R Rapid Start Technology 2 Select ereen
13. Help Auto mode fan slope PWM dl F2 Previous Values ES Optimized Defaults F4 Save amp Exit HSE malt Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 12 Smar Fan Mode Configuration CPU FANI SYS FANI Smart Fan Control Auto Mode Use the CPU FAN1 SYS FAN1 Smart Fan Control option to configure the CPU System Smart Fan gt Manual Mode The fan spins at the speed set in Manual Mode settings gt Auto Mode DEFAULT The fan adjusts its speed using Auto by Duty Cycle settings Auto mode fan start off temperature Use the or key to change the Auto mode fan start off temperature value Enter a decimal number between 1 and 100 Auto mode fan start PWM Use the or key to change the Auto mode fan start PWM value Enter a decimal number between 1 and 128 B o ll E M integration Corp ECN 380 QM87 Embedded System Auto mode fan slope PWM Use the or key to change the Auto mode fan slope PWM value Enter a decimal number between 1 and 64 4 3 10 F81866 Super IO Configuration Use the F81866 Super IO Configuration menu BIOS Menu 13 to set or change the configurations for the serial ports Aptio Setup Utility Copyright C 2012 American Megatrends Inc F81866 Super IO Configuration Set Parameters of Serial Port 1 COMA F81866 Super IO Chip F81866 gt Serial Port 1 Configuration Sewell Powe 2 Conr iepretim 92 2 2 E gt Ser
14. V F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 15 F81866 H W Monitor 4 3 12 Serial Port Console Redirection The Serial Port Console Redirection menu BIOS Menu 16 allows the console redirection options to be configured Console redirection allows users to maintain a system remotely by re directing keyboard input and text output through the serial port B e i E M integration Corp ECN 380 QM87 Embedded System Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced COM1 Console Redirection gt Console Redirection COM2 Console Redirection gt Console Redirection COM3 Console Redirection gt Console Redirection iAMT SOL Console Redirection Disabled Settings Disabled Settings Disabled Settings COM4 Pci Bus0 Dev0 Func0 Disabled Port Is Disabled Console Redirection Enable or Disable 26 Select Screen TJ Select Item Enter Select w e Change Oot Biles Cenered elo F2 Previous Values F3 Optimized Defaults F4 Save amp Exit IASC Sait Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 16 Serial Port Console Redirection Console Redirection Disabled Use Console Redirection option to enable or disable the console redirection function gt Disabled gt Enabled DEFAULT Disa
15. address is IRQ3 4 4 3 10 1 3 Serial Port 3 Configuration Serial Port Enabled Use the Serial Port option to enable or disable the serial port gt Disabled Disable the serial port gt Enabled DEFAULT Enable the serial port Change Settings Auto Use the Change Settings option to change the serial port IO port address and interrupt address gt Auto DEFAULT The serial port IO port address and interrupt address are automatically detected gt 10 3E8h Serial Port UO port address is 3E8h and the interrupt IRQ 10 address is IRQ10 gt 10 3E8h Serial Port UO port address is 3E8h and the interrupt IRQ 10 11 address is IRQ10 11 gt 10 2E8h Serial Port UO port address is 2E8h and the interrupt IRQ 10 11 address is IRQ10 11 gt 10 2D0h Serial Port I O port address is 2DOh and the interrupt IRQ 10 11 address is IRQ10 11 gt 10 2D8h Serial Port I O port address is 2D8h and the interrupt IRQ 10 11 address is IRQ10 11 ECN 380 QM87 Embedded System 4 3 11 F81866 H W Monitor The F81866 H W Monitor menu BIOS Menu 15 displays the system temperature and voltages Aptio Setup Utility Copyright C 2012 American Megatrends Inc PC Health Status System temperature ga 0 e SOMO O RE 3 sr VAD W WS Saran Wo a V128 g PLL 704 y 252 Select Sereen FPV 3 3 AS T J Select Item VSB5V 5 040 V Enter Select W335 3S 3 344 V Change Opt VSB3V SS NY Fl General Help VBAT gt 3 056
16. an adapter will need to be used to plug them into the audio jacks Line Out port LINE OUT Connects to a headphone or a speaker Microphone MIC Connects to a microphone Figure 3 9 Audio Connector Step 3 Check audio clarity Check that the sound is coming through the right speakers by adjusting the balance front to rear and left to right Integration Corp ECN 380 QM87 Embedded System 3 6 2 HDMI Device Connection The HDMI connector transmits a digital signal to compatible HDMI display devices such as a TV or computer screen To connect the HDMI cable to the ECN 380 QM87 follow the steps below Step 1 Locate the HDMI connector The location is shown in Chapter 1 Step 2 Align the connector Align the HDMI connector with the HDMI port Make sure the orientation of the connector is correct Figure 3 10 HDMI Connection Step 3 Insert the HDMI connector Gently insert the HDMI connector The connector should engage with a gentle push If the connector does not insert easily check again that the connector is aligned correctly and that the connector is being inserted with the right way up 3 6 3 LAN Connection There are two external RJ 45 LAN connectors The RJ 45 connector enables connection to an external network To connect a LAN cable with an RJ 45 connector please follow the instructions below ECN 380 QM87 Embedded System Step 1 Locate the RJ 45 connectors The locatio
17. gt AMT Configuration TV Select Item gt USB Configuration Enter Select gt iWDD H W Monitor Change Opt SMS OR Super I0 Coaricurariomn Fl General Help gt F81866 H W Monitor F2 Previous Values gt Serial Port Console Recirection F3 Optimized Defaults gt inL Peace F4 Save Exit TECE Polg Version 2 15 1230 Copyright C 2012 American Megatrends Inc BIOS Menu 2 Advanced 4 3 1 ACPI Settings The ACPI Settings menu BIOS Menu 3 configures the Advanced Configuration and Power Interface ACPI options Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced ACPI Settings Select ACPI sleep stare the system will enter ACPI Sleep State S1 only CPU Stop C1 when the SUSPEND button is pressed E Select Sereen TL Select Item Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit EOC Saile Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 3 ACPI Settings ECN 380 QM87 Embedded System ACPISleep State S1 only CPU Stop Clock Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used gt s1 only CPU Stop DEFAULT The system enters S1 POS sleep state The Clock system appears off The CPU is stopped RAM is refreshed the system is running in a low power mode gt s3 only Suspend The caches are flushed an
18. items at the top of the BIOS screen and listed above ECN 380 QM87 Embedded System 4 2 Main The Main BIOS menu BIOS Menu 1 appears when the BIOS Setup program is entered The Main menu gives an overview of the basic system information C Aptio Setup Utility Copyright 2012 American Megatrends Inc Main Advanced Chipset Boot Security Save amp Exit BIOS Information Set the Date Use Tab to BIOS Vendor American Megatrends switch between Date Core Version Aloe elements Compliancy get Zadodp PU 1 2 Project Version E416AR11 ROM Build Date and Time 12 13 2013 18512323 iWDD Vendor iEi iWDD Version E416ER11 bin Processor Information Name Haswell Brand String Intel R Core TM 15 440 Frequency 2700 MHz Processor ID 306c3 Stepping CO Number of Processors 2Core s 4Thread s Microcode Revision 16 GT Info GT2 800 MHz IGFX VBIOS Version 2167 Memory RC Version L Total Memory 4096 MB DDR3 Memory Frequency 1600 MHz PCH Information Name LynxPoint PCH SKU QM87 Stepping VEN LAN PHY Revision O TRE ME FW Version 9 010 1372 ME Firmware SKU 5MB DPT belecet Sereen TL Select Item SETA ekte gueney Enter Select DOFR Support Unsupported Change Opt Read Status Clock Frequnecy 50 MHz Fl General Help Write Status Clock Frequnecy 50 MHz F2 Previous Values Fast Read Status Clock Frequnecy 50 MHz F3 Optimized Defaults F4 Save amp Exit System Date Tue 10 21 2014
19. plastic bridge in the socket Figure 3 6 Step 4 Push the SO DIMM into the socket at an angle Figure 3 6 Figure 3 6 SO DIMM Installation Step 5 Gently pull the arms of the SO DIMM socket out and push the rear of the SO DIMM down Figure 3 6 Step 6 Release the arms on the SO DIMM socket They clip into place and secure the SO DIMM in the socket Step 7 Reinstall the memory cover that was previously removed in the same position it was before ECN 380 QM87 Embedded System 3 4 Pluggable DC In Terminal Block Installation To install the pluggable DC in terminal block please follow the steps below Step 1 Locate the DC in terminal block connector The location of the connector is shown in Figure 1 3 Step 2 Align the pluggable DC in terminal block with the DC in terminal block connector on the ECN 380 QM87 Step 3 Once aligned insert the pluggable DC in terminal block into the DC in terminal block connector Step 4 Secure the pluggable DC in terminal block to the external interface by tightening the two retention screws on either side of the terminal block Figure 3 7 Figure 3 7 Pluggable DC in Terminal Block Installation 3 5 Mounting the System with Mounting Brackets To mount the embedded system onto a wall or some other surface using the two mounting brackets please follow the steps below Step 1 Turn the embedded system over Step 2 Align the two retention screw holes in eac
20. 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 22 Graphics Configuration Primary Display Auto Use the Primary Display option to select the primary graphics controller the system uses The following options are available Auto Default IGFX PCIE DVMT Pre Allocated 256M Use the DVMT Pre Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots The system memory allocated can then only be used as graphics memory and is no longer available to applications or the operating system Configuration options are listed below 32M 64M 128M 256M Default 512M Integration Corp ECN 380 QM87 Embedded System DVMT Total Gfx Mem MAX Use the DVMT Total Gfx Mem option to select DVMT5 0 total graphic memory size used by the internal graphic device The following options are available 128M 256M MAX Default Primary IGFX Boot Display VBIOS Default Use the Primary IGFX Boot Display option to select the display device used by the system when it boots Configuration options are listed below VBIOS Default DEFAULT CRT LVDS HDMI 1 HDMI 2 Backlight Control CCFL Use the Backlight Control option to select the backlight control mode gt LED The LVDS backlight is LED gt CCFL DEFAULT The LVDS backlight is CCFL ECN 380 QM87 Embedded System 4 4 2 2 Memory Conf
21. CN 380 QM87 Embedded System 4 6 Security Use the Security menu BIOS Menu 25 to set system and user passwords Aptio Setup Utility Copyright C 2012 American Megatrends Inc Main Advanced Chipset Boot Security Save amp Exit Password Description Set Setup Administrator Password If ONLY the Administrator s password is set then this only limits access to Setup and is only feel ic ie when entering reegen 4 re If ONLY the User s password is set then this is a power on password and must be entered to boot or enter Setup In Setup the User will gt Select Screen have Administrator rights J Select Item The password length must be Enter sele ct in the following range Change Opt Minimum length 3 Fl General Help Maximum length 20 F2 Previous Values F3 Optimized Defaults F4 Save amp Exit User Password ESC Exit Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 25 Security Administrator Password Use the Administrator Password to set or change an administrator password User Password Use the User Password to set or change a user password ECN 380 QM87 Embedded System 4 7 Save amp Exit Use the Save amp Exit menu BIOS Menu 26 to load default BIOS values optimal failsafe values and to save configuration changes Ine C Security Aptio Setup Utility Copyright Advanced Chipset Boot 2012 American Megatrends
22. ECN 380 QM87 Embedded System Specifications Operating Vibration MIL STD 810F 514 5C 2 with SSD Weight Net Gross 2 4 kg 4 2 kg Table 1 2 Technical Specifications 1 5 Front Panel The ECN 380 QM87 front panel contains 1 x HDD LED 1 x Power button 2 x RS 232 serial ports 2 x USB 2 0 ports An overview of the front panel is shown in Figure 1 2 c o 5 2 S 3 o D o N m N x N 2 x RS 232 Figure 1 2 ECN 380 QM87 Front Panel 1 6 Rear Panel 1 6 1 ECN 380 QM87 C 4G R10 Rear Panel The ECN 380 QM87 rear panel contains 1x HDD bay 2 x HDMI ports 1 x Line out port ECN 380 QM87 Embedded System 1x Mic in port 1 x DC jack for 12V DC power input 2x RJ 45 LAN ports 2x USB 3 0 ports 2x USB 2 0 ports 1x VGA port An overview of the rear panel is shown in Figure 1 3 below gt 2 Q Q I Q I x N 2 x USB 3 0 2 x USB 2 0 VGA Line out Mic in DC jack Figure 1 3 ECN 380 QM87 Rear Panel 1 6 2 ECN 380 QM87 15 WD 4G R10 Rear Panel The ECN 380 QM87 rear panel contains 1x HDD bay 2x HDMI ports 1x Line out port 1x Mic in port 1x DC jack for 9 V 36 V power input 1x 3 pin terminal block for 9 V 36 V power input 2x RJ 45 LAN ports 2x USB 3 0 ports 2x USB 2 0 ports 1x VGA port ECN 380 QM87 Embedded System An overview of the rear panel is shown in Figure 1 3 below e ei kd Q
23. Ei 17 IEI Integration Corp TT ay ne E e D High Performance Fanless Embedded System with Intel Core 15 4400E 2 7 GHz Celeron 2000E processor VGA Dual HDMI RoHS Compliant User Manual YG Rev 1 00 23 October 2014 Rous en ECN 380 QM87 Embedded System Revision Date Version Changes 23 October 2014 1 00 Initial release ECN 380 QM87 Embedded System Copyright COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability design and function and does not represent a commitment on the part of the manufacturer In no event will the manufacturer be liable for direct indirect special incidental or consequential damages arising out of the use or inability to use the product or documentation even if advised of the possibility of such damages This document contains proprietary information protected by copyright All rights are reserved No part of this manual may be reproduced by any mechanical electronic or other means in any form without prior written permission of the manufacturer TRADEMARKS All registered trademarks and product names mentioned herein are used for identification purposes only and may be trademarks and or registered trademarks of their respective owners Page ili ECN 380 QM87 Embedded System 1 INTRODUCTION 000 1 ST EE dE 2 1 2 MODE
24. L VARIATION S ee Eege Ee 2 1 3 FEATURES ER ee 3 1 4 TECHNICAL SPECIFICATIONS ii atada adan 3 L3 FRONT PANEL ERE EE ET 5 LO REAR PANE jamne e atado 5 1 6 1 ECN 380 QM87 C 4G R10 Rear Panel ooooonninnniconanoncnocnoananano nono nocnononnnno nn nono 5 1 6 2 ECN 380 QM87 i5 WD 4G R10 Rear Panel 6 17 ET DS NERE ENE EN 8 2 UNPACEING gassene Gear 9 2 1 ANTI STATIC PRECAUTIONS a RARA A AR 10 2 2 UNPACKING e 10 2 3 UNPACKING CHEO ISS AS ASA AA AAA 11 SINS PALLA TION aa AA 13 3 1 INSTALLATION ANSER EE 14 3 2 HARD DISK DRIVE HDD INsmttAmiON nn rr nn nc ononnannnn rn nnoos 14 3 3 SO DIMM Ee 17 3 4 PLUGGABLE DC IN TERMINAL BLOCK INSTALLATION vannrnrvvnnnnnnennnnnnrnnnvnrsnnnennnnnnnsennene 19 3 5 MOUNTING THE SYSTEM WITH MOUNTING BRACKET 19 3 6 EXTERNAL PERIPHERAL INTERFACE CONNECTORS amnnnnnnnrnrnnnnnnnnnnnnnnnrnnnvnnsnnnennnnnnnsensene 20 3 6 1 Audio Connection 21 362 HDMI Device COnMeCHON asii dida 22 3 6 3 LAN Connection 22 ECN 380 QM87 Embedded System 4 1 INTRODUCTION A EES 29 4 1 1 Starting Setup EEE ER EN EE 29 4 12 Using REE EN EN 29 ALEA is 30 4 1 4 Unable to Reboot after Configuration Change 30 4 13 BIOS MOB a alias 30 A O Ei PE O O II EN 32 2 ADVANCED AAA ii 33 4 3 1 ACES ORRE ERR ASS EN 34 4 3 2 RTC Wake SES ERE EN RES 35 4 3 3 EP ee 36 4 3 4 CPU E 38 A A EEEE ERRET 40 4 3 0 Intel R Rapid Start TechnolO Y iia id e darias 4 AE A A ER 42 45 0 USB Cats 44 4 3 9 MD Monito A ees 45 4 3 9 1 Sma
25. M rrnnvvnnnnvnnnnnnnnnnvnnnnvnnnnnnnnnnnnnnnvnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 8 Figure 3 1 HDD Cover Retention SCrews rrssrrnnnnnnnnvnnnnnvnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenn 15 Figure 3 2 HDD Installation ernnnnnvennnnnnvennnnnnvennnnnnvennnnnnnennnnnnnennnnnnnnnnnnnnnennnnnnnennnnnnnennnnnnnnnnnnnenn 15 Figure 3 3 HDD Retention SCIews rnrsvrnnnvnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 16 Figure 3 4 Memory Cover Retention SCrew rrrssrrnsnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenn 17 Figure 3 5 SO DIMM Socket ccoo is 18 Figure 3 6 SO DIMM Installation ernnvrnnnvennnnvnnnnnvnnnvnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenn 18 Figure 3 7 Pluggable DC in Terminal Block Installation ernnvrnnnvnnnnnvnnnnnnnnnvnnnnnvnnnnnnnnnnnnnnnenn 19 Figure 3 8 Mounting Bracket Retention SCrews rrnnvvnnnnvnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnenn 20 Figure 3 9 Audio COMMCCION REENEN EEGEN EENS 21 Figure 3 10 HDMI Connection rnnsavnnnnvnnnnvennnnvnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenn 22 Figure 3 11 LAN Connection ric eegiese eeie eebe Seege EENS 23 Figure 3 12 DB 9 Serial Port Connector rrss nassvrnnvvnnnnvnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenn 24 Figure 3 13 USB Device Connection rrnavrnnnavnnnnnnnnnvnnnnnvnnnnnnnnnnnnnnnnnnnn
26. anless Chassis Construction Aluminum alloys with heavy duty metal Motherboard CPU Intel Core 5 4400E 2 7 GHz Intel Celeron 2000E 2 2 GHz Chipset Intel QM87 Memory One 204 pin DDR3 4GB SO DIMMs pre installed system max 8GB Storage Hard Drive 2 x 2 5 SATA 6Gb s HDD SSD drive bay TO Interfaces USB 2 x USB 3 0 ports 4 x USB 2 0 ports P i E integration Corp ECN 380 QM87 Embedded System Specifications Ethernet 2 x RJ 45 Intel 1210 PCle GbE controller Intel Clarkvill V PHY with Intel AMT 9 0 support RS 232 2 x DB 9 Dis play 2x HDMI 1 x VGA Resolution VGA Up to 1920 x 1200 60Hz HDMI Up to 2500 x 1600 60Hz Audio 1 x Line out 1 x Mic in Wireless 802 1b g n 2T2R optional Expansions PCIe Mini 1 x Full size PCle Mini Reserved for Wi Fi Remote Management iRIS Ei Remote Intelligent Systems 1 x RIS 2400 Optional Power Power Input 12V DC SKU 2 pin DC Jack only 9 36V DC SKU 2 pin DC Jack amp 3 pin terminal Power Consumption 12 V 4 6 A Intel mobile Core Core i5 4400E with 4GB 1333MHz DDR3 memory Reliability Mounting Wall mount VESA 100 Operating Temperature 20 C 60 C with air flow SSD Humidity 5 95 non condensing Operating Shock Half sine wave shock 5G 11ms 3 shocks per axis Page 4
27. atic wristband can help to prevent ESD from damaging any electrical component Self grounding Before handling any electrical component touch any grounded conducting material During the time the electrical component is handled frequently touch any conducting materials that are connected to the ground Use an anti static pad When configuring or working with an electrical component place it on an antic static pad This reduces the possibility of ESD damage Only handle the edges of the electrical component When handling the electrical component hold the electrical component by its edges A 1 3 Product Dis posal Ad CAUTION Risk of explosion if battery is replaced by and incorrect type Only certified engineers should replace the on board battery Dispose of used batteries according to instructions and local regulations Outside the European Union If you wish to dispose of used electrical and electronic products outside the European Union please contact your local authority so as to comply with the correct disposal method Within the European Union waste electrical and electronic products carrying the mark left must be disposed of separately from normal household waste This includes Page 70 ECN 380 QM87 Embedded System monitors and electrical accessories such as signal cables or power cords When you need to dispose of your display products please follow the guidance of you
28. bled Intel Rapid Start Technology is enabled 4 3 7 AMT Configuration The AMT Configuration menu BIOS Menu 9 allows the advanced power management options to be configured ECN 380 QM87 Embedded System Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced Intel AMT Enabled Enable Disable Intel R Un Configure ME Disabled Active Management Technology BIOS Extension Note iAMT H W is always enabled tale Ojo Jus comes the BIOS extension execution If enabled this requires additional firmware in the SPI device GE Select Sereen P J Select Item Enter Select Change Opt Fl General Help F2 Previous Values B Optimized Defaults F4 Save amp Exit BSC Weste Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 9 AMT Configuration e Intel AMT Enabled Use Intel AMT option to enable or disable the Intel AMT function gt Disabled Intel AMT is disabled gt Enabled DEFAULT Intel AMT is enabled Un Configure ME Disabled Use the Un Configure ME option to perform ME unconfigure without password operation gt Disabled DEFAULT Not perform ME unconfigure gt Enabled To perform ME unconfigure 4 3 8 USB Configuration ECN 380 QM87 Embedded System Use the USB Configuration menu BIOS Menu 10 to read USB configuration information and configure the USB settings Aptio Setup Utility Copyright
29. bled the console redirection function Enabled the console redirection function La NOTE The following five options appear when the Console Redirection option is enabled Terminal Type ANSI Use the Terminal Type option to specify the remote terminal type gt vTi00 The target terminal type is VT100 ECN 380 QM87 Embedded System gt vT1100 The target terminal type is VT100 gt vT UTFS The target terminal type is VT UTF8 gt ANSI DEFAULT The target terminal type is ANSI Bits per second 115200 Use the Bits per second option to specify the serial port transmission speed The speed must match the other side Long or noisy lines may require lower speeds gt 9600 Sets the serial port transmission speed at 9600 gt 19200 Sets the serial port transmission speed at 19200 gt 38400 Sets the serial port transmission speed at 38400 gt 57600 Sets the serial port transmission speed at 57600 gt 115200 DEFAULT Sets the serial port transmission speed at 115200 Data Bits 8 Use the Data Bits option to specify the number of data bits gt 7 Sets the data bits at 7 gt 8 DEFAULT Sets the data bits at 8 Parity None Use the Parity option to specify the parity bit that can be sent with the data bits for detecting the transmission errors gt None DEFAULT No parity bit is sent with the data bits gt Even The parity bit is 0 if the number of ones in the data bits is even gt
30. covery gt Disabled DEFAULT Auto recovery function disabled gt Enabled Auto recovery function enabled 4 4 Chipset Use the Chipset menu BIOS Menu 18 to access the PCH IO and System Agent SA configuration menus Integration Corp ECN 380 QM87 Embedded System EA WARNING Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction Aptio Setup Utility Copyright C 2012 American Megatrends Inc Main renset Chipset Boot Security Save amp Exit gt PCH IO Configuration PCIE Perenerers gt System Agent SA Configuration gt Select Screen TL Select Item Enter Select Change Opt Bile General kelp F2 Previous Values F3 Optimized Defaults F4 Save Exit SES EIE Version 2 15 1236 Copyright C 2012 American Megatrends EE BIOS Menu 18 Chipset ECN 380 QM87 Embedded System 4 4 1 PCH IO Configuration Use the PCH IO Configuration menu BIOS Menu 19 to configure the PCH parameters Aptio Setup Utility Copyright C 2012 American Megatrends Inc Restore AC Power Loss Azalia HD Audio USB Power SW1 Version 2 15 1236 Copyright C 2012 American Megatrends Inc Auto Power Button Status Power Saving Function ERP gt PCI Express Configuration Disable ATX Last State Enabled Disabled 5V DUAL BIOS Menu 19 PCH IO Configuration Restore AC Powe
31. d CPU fan speed and contains the fan configuration submenu Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced PC Health Status Smart Fan Mode Select CPU temperature 3 560 CPU FAN1 Speed N A SYS_FAN1 Speed SINR ee gt Select Screen gt Smart Fan Mode Configuration PL Select Item Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit BSCS Exit Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 11 iWDD H W Monitor PC Health Status The following system parameters and values are shown The system parameters that are monitored are CPU Temperature CPU Fan Speed System Fan Speed 4 3 9 1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu BIOS Menu 12 to configure the smart fan temperature and speed settings Page 45 ECN 380 QM87 Embedded System Aptio Setup Utility Copyright C 2012 American Megatrends Inc Smart Fan Mode Configuration Smart Fan Mode Select CPU FAN1 Smart Fan Control Auto Mode Auto mode fan start temperature 50 Auto mode fan off temperature QU iia Auto mode fan start PWM 30 Auto mode fan slope PWM il SS Select Bess SYS_FAN1 Smart Fan Control Auto Mode Pl Select Item Auto mode fan start temperature 50 EnterSelect Auto mode fan off temperature 40 Change Opt Auto mode fan start PWM 30 Fl General
32. d DEFAULT Disables Intel Virtualization Technology gt Enabled Enables Intel Virtualization Technology EIST Enabled Use the EIST option to enable or disable the Intel Soeed Step Technology gt Disabled Disables the Intel Speed Step Technology gt Enabled DEFAULT Enables the Intel Speed Step Technology Intel TXT LT Support Disabled Use the Intel TXT LT Support BIOS option to enable or disable the Intel Trusted Execution Technology gt Disabled DEFAULT Disables the Intel Trusted Execution Technology gt Enabled Enables the Intel Trusted Execution Technology 4 3 5 SATA Configuration Use the SATA Configuration menu BIOS Menu 7 to change and or set the configuration of the SATA devices installed in the system Aptio Setup Utility Copyright C 2012 American Megatrends Inc SATA Controller s Enabled Enable or disable SATA SATA Mode Selection IDE Device SATA Baer eg S ATA2 Empty S ATA3 Empty DC Select Screen S_ATA4 Empty TL Select Item M SATA1 Empty Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 7 SATA Configuration Page 40 ECN 380 QM87 Embedded System SATA Controller s Enabled Use the SATA Controller s option to configure the SATA controller gt Enabled DEFAULT Enable SATA controller
33. d the CPU is powered to RAM off Power to the RAM is maintained The computer returns slower to a working state but more power is saved 4 3 2 RTC Wake Settings The RTC Wake Settings menu BIOS Menu 4 enables the system to wake at the specified time Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced Wake system with Fixed Time Disabled Enable or disable System wake on alarmevent When enabled System will wake on the Gates she mink SEC specified 252 Select Sereen T J Select Item Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save Exit NEIE Bolt Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 4 RTC Wake Settings Integration Corp ECN 380 QM87 Embedded System Wake system with Fixed Time Disabled Use the Wake system with Fixed Time option to enable or disable the system wake on alarm event gt Disabled DEFAULT The real time clock RTC cannot generate a wake event gt Enabled If selected the Wake up every day option appears allowing you to enable to disable the system to wake every day at the specified time Besides the following options appear with values that can be selected Wake up every day Wake up date Wake up hour Wake up minute Wake up second After setting the alarm the computer turns itself on from a suspend state when the alarm goes off
34. h bracket with the corresponding retention screw holes on the sides of the bottom surface Figure 3 11 Integration Corp ECN 380 QM87 Embedded System Figure 3 8 Mounting Bracket Retention Screws Step 3 Secure the brackets to the system by tightening two retention screws into each bracket Figure 3 11 Step 4 Drill holes in the intended installation surface Step 5 Align the mounting holes in the sides of the mounting brackets with the predrilled holes in the mounting surface Step 6 Insert four retention screws two in each bracket to secure the system to the wall 3 6 External Peripheral Interface Connectors The following external peripheral devices can be connected to the external peripheral interface connectors Audio devices HDMI devices RAP Ethernet cable connector Serial devices USB devices VGA monitor ECN 380 QM87 Embedded System 3 6 1 Audio Connection The audio jacks on the external audio connector enable the ECN 380 QM87 to be connected to a stereo sound setup To install the audio devices follow the steps below Step 1 Identify the audio plugs The plugs on your home theater system or speakers may not match the colors on the rear panel If audio plugs are plugged into the wrong jacks sound quality will be very bad Step 2 Plug the audio plugs into the audio jacks Plug the audio plugs into the audio jacks If the plugs on your speakers are different
35. he safety precautions outlined in the sections that follow A 1 1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times Make sure the power is turned off and the power cord is disconnected when moving installing or modifying the system Do not apply voltage levels that exceed the specified voltage range Doing so may cause fire and or an electrical shock Electric shocks can occur if opened while still powered on Do not drop or insert any objects into the ventilation openings If considerable amounts of dust water or fluids enter the system turn off the power supply immediately unplug the power cord and contact the system vendor DO NOT O Drop the system against a hard surface O Ina site where the ambient temperature exceeds the rated temperature A 1 2 Anti static Precautions A WARNING Failure to take ESD precautions during the installation of the ECN 380 QM87 may result in permanent damage to the ECN 380 QM87 and severe injury to the user ECN 380 QM87 Embedded System Electrostatic discharge ESD can cause serious damage to electronic components including the ECN 380 QM87 Dry climates are especially susceptible to ESD It is therefore critical that whenever the ECN 380 QM87 is opened and any of the electrical components are handled the following anti static precautions are strictly adhered to Wear an anti static wristband Wearing a simple anti st
36. hnology is supported by the CPU Intel VT x Technology Indicates if Intel VT x Technology is supported by the CPU Intel SMX Technology Indicates if Intel SMX Technology is supported by the CPU EIST Technology Indicates if the Enhanced Intel SoeedStep Technology EIST is supported by the CPU 64 bit Indicates if 64 bit is supported by the CPU Li Data Cache Lists the amount of data storage space on the L1 cache Li Code Cache Lists the amount of code storage space on the L1 cache L2 Cache Lists the amount of storage space on the L2 cache L3 Cache Lists the amount of storage space on the L3 cache Hyper threading Enabled Use the Hyper Threading BIOS option to enable or disable the Intel Hyper Threading Technology gt Disabled Disables the Intel Hyper Threading Technology gt Enabled DEFAULT Enables the Intel Hyper Threading Technology Active Processor Cores All Use the Active Processor Cores option to configure the number of the active processor cores gt al DEFAULT Active all of the processor cores gt 1 Active one of the processor cores Intel Virtualization Technology Disabled Use the Intel Virtualization Technology option to enable or disable virtualization on the system When combined with third party software Intel Virtualization technology allows several OSs to run on the same system at the same time ECN 380 QM87 Embedded System gt Disable
37. ial Port 3 Configuration gt Select Screen T J Select Item mess Selec ERC hange Ojore Biles Cemerzal kelp EZ Previous Values F3 Optimized Defaults F4 Save amp Exit DOCE Sat Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 13 F81866 Super IO Configuration ECN 380 QM87 Embedded System 4 3 10 1 Serial Port n Configuration Use the Serial Port n Configuration menu BIOS Menu 14 to configure the serial port n Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced Serial Port n Configuration Enable or Disable Serial Port COM Serial Port Enabled Device Settings IO 3F8h IRO 4 Change Settings Auto gt Select Screen 1 V Select Item ieee Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit SOS Jae Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 14 Serial Port n Configuration Menu 4 3 10 1 1 Serial Port I Configuration Serial Port Enabled Use the Serial Port option to enable or disable the serial port gt Disabled Disable the serial port gt Enabled DEFAULT Enable the serial port Change Settings Auto Use the Change Settings option to change the serial port IO port address and interrupt address gt Auto DEFAULT The serial port IO port address and interrupt address are automatically detected gt 10 3F8h Serial P
38. iguration Use the Memory Configuration submenu BIOS Menu 23 to view memory information Aptio Setup Utility Copyright C 2012 American Megatrends Inc Memory Information Memory Frequency Total Memory DIMM 1 1600 Mhz 4096 MB 4096 MB DDR3 DDR3 oes TL ar Il TAE B F4 BSE Select Screen Select Item Enter Select Change Opt General Help Previous Values Optimized Defaults Save amp Exit Iess 2012 American Megatrends Inc Version A 15 12360 Copyright C BIOS Menu 23 Memory Configuration ECN 380 QM87 Embedded System 4 5 Boot Use the Boot menu BIOS Menu 24 to configure system boot options Aptio Setup Utility Copyright C 2012 American Megatrends Inc Main Advanced Chipset Security Save amp Exit Boot Configuration Select the keyboard Bootup NumLock State On NumLock state Quiet Boot Enabled Option ROM Messages Force BIOS Launch PXE OpROM DA EE UEFI Boot Disabled gt Select Screen TL Select Item Beet Ouiclon Prigalrles Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit BICI Bale Version 2 15 1230 Copyright C 2012 American Megatrends Inc BIOS Menu 24 Boot Bootup NumLock State On Use the Bootup NumLock State BIOS option to specify if the number lock setting must be modified during boot up gt on DEFAULT Al
39. lows the Number Lock on the keyboard to be enabled automatically when the computer system boots up This allows the immediate use of the 10 key numeric keypad located on the right side of the keyboard To confirm this the Number Lock LED light on the keyboard is lit gt off Does not enable the keyboard Number Lock automatically To use the 10 keys on the keyboard press the Number Lock key located on the upper left hand corner of the 10 key pad The Number Lock LED on the keyboard lights up when the Number Lock is engaged ECN 380 QM87 Embedded System Quiet Boot Enabled Use the Quiet Boot BIOS option to select the screen display when the system boots gt Disabled Normal POST messages displayed gt Enabled DEFAULT OEM Logo displayed instead of POST messages Option ROM Messages Force BIOS Use the Option ROM Messages option to set the Option ROM display mode gt Force DEFAULT Sets display mode to force BIOS BIOS gt Keep Sets display mode to current Current Launch PXE OpROM Disabled Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices gt Disabled DEFAULT Ignore all PXE Option ROMs gt Enabled Load PXE Option ROMs UEFI Boot Disabled Use the UEFI Boot BIOS option to allow the system to boot from the UEFI devices gt Disabled DEFAULT Disables to boot from the UEFI devices gt Enabled Enables to boot from the UEFI devices E
40. n of the LAN connector is shown in Chapter 1 Step 2 Align the connectors Align the RJ 45 connector on the LAN cable with one of the RJ 45 connectors on the ECN 380 QM87 See Figure 3 11 Figure 3 11 LAN Connection Step 3 Insert the LAN cable RJ 45 connector Once aligned gently insert the LAN cable RJ 45 connector into the RJ 45 connector 3 6 4 DB 9 Serial Port Connection There are two RS 232 DB 9 connectors of the ECN 380 QM87 for serial device connection Follow the steps below to connect a serial device to the DB 9 connector of the ECN 380 QM87 Step 1 Locate the DB 9 connector The locations of the DB 9 connectors are shown in Chapter 1 Step 2 Insert the serial connector Insert the DB 9 connector of a serial device into the DB 9 connector on the rear panel See Figure 3 12 Integration Corp ECN 380 QM87 Embedded System Figure 3 12 DB 9 Serial Port Connector Step 3 Secure the connector Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector 3 6 5 USB Device Connection La NOTE User must install the USB 3 0 driver before connecting a USB device to the system or else the system may not recognize the connected device There are four USB 2 0 connectors and two USB 3 0 connectors on the ECN 380 QM87 To connect a USB device please follow the instructions below Step 1 Locate the USB connectors The l
41. neS Intel HT Technology Intel VI x Technology Intel SMX Technology 64 bit EIST Technology L1 Data Cache L1 Code Cache L2 Cache L3 Cache Hyper threading Active Processor Cores Intel Virtualization Technology EIST Intel TXT LT Support Version 2 15 1236 Copyright C 2012 American Megatrends Inc 306c3 7 2700 MHz 800 MHz 2700 MHz 2 Supported Supported Supported Supported Supported 32 kB x 2 JG IB 2 256 Ne 2 3072 kB Enabled Disabled BIOS Menu 6 CPU Configuration Enabled for Windows XP and Linux OS optimized for Hyper Threading Technology and Disabled ror orhe 0S 08 mor optimized for Hyper Threading Technology When Disabled only one thread per enabled core is enabled Se Select Sereen TJ Select Item Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ES GE ike The CPU Configuration menu BIOS Menu 6 lists the following CPU details Processor Type Lists the brand name of the CPU being used CPU Signature Lists the CPU signature value Microcode Patch Lists the microcode patch being used Max CPU Speed Lists the maximum CPU processing speed Min CPU Speed Lists the minimum CPU processing speed CPU Speed Lists the CPU processing speed Processor Cores Lists the number of the processor core ECN 380 QM87 Embedded System Intel HT Technology Indicates if Intel HT Tec
42. ng alcohol A cloth moistened with water or rubbing alcohol can be used to clean the ECN 380 QM87 ECN 380 QM87 Embedded System Using solvents The use of solvents is not recommended when cleaning the ECN 380 QM87 as they may damage the plastic parts Vacuum cleaner Using a vacuum specifically designed for computers is one of the best methods of cleaning the ECN 380 QM87 Dust and dirt can restrict the airflow in the ECN 380 QM87 and cause its circuitry to corrode Cotton swabs Cotton swaps moistened with rubbing alcohol or water are excellent tools for wiping hard to reach areas Foam swabs Whenever possible it is best to use lint free swabs such as foam swabs for cleaning ECN 380 QM87 Embedded System Appendix B Hazardous Materials Disclosure Page 73 Integration Corp ECN 380 QM87 Embedded System B 1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002 95 EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China China RoHS standards The table below acknowledges the presences of small quantities of certain materials in the product and is applicable to China RoHS only A label will be placed on each product to indicate the estimated Environmentally Friendly Use Period EFUP This is an estimate of the number of years that these substances would no
43. nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenn 25 Figure 3 14 VGA CoOnnector rrnnsvnnnnnvnnnnvnnnnvennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 26 Figure 3 15 Power Button nnnnnnrnnnnnnnrrnnnnnnrrnnnnnnrrnnnnnnrrennnnnrvnennnnrreennnnrnnnnnnnrnnnnnnnrsennnnnrnnnnnnnner 27 Page vii P o I E M integrationiCorp A Integration Corp ECN 380 QM87 Embedded System List of Tables Table 1 1 ECN 380 QM87 Model Variations rssrnnnnvrnnnvnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 3 Table 1 2 Technical SpecificatiOnS rrssvrnnnvnnnnnvnnnnnnnnnvnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnr 5 Table 4 1 BIOS Navigation Keys rmrnnnavnnnnnvnnnnvnnnnvvnnnnvnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenn 30 ECN 380 QM87 Embedded System Chapter I Introduction Integration Corp ECN 380 QM87 Embedded System 1 1 Overview Figure 1 1 ECN 380 QM87 The ECN 380 QM87 is a platform based on Intel Core i5 4400E or Intel Celeron 2000E processor and the Intel QM87 chipset The ECN 380 QM87 contains one VGA and two HDMI video outputs which can be applied to multi display application and support high Full HD video quality The ECN 380 QM87 is equipped with an abundant of I O ports and supports a wide range of operating temperature Four USB 2 0 and two USB 3 0 ports provide flexible expansion o
44. o the back of the ECN 380 QM87 3 2 Hard Disk Drive HDD Installation To install the hard drive to the removable HDD bay please follow the steps below Remove two HDD cover retention screws from the rear panel ECN 380 QM87 Embedded System Figure 3 1 HDD Cover Retention Screws Step 2 Lift the HDD bracket out of the ECN 380 QM87 and attach the HDD to the HDD bracket Figure 3 2 HDD Installation Integration Corp ECN 380 QM87 Embedded System Step 3 Secure the HDD with the HDD bracket by four retention screws Figure 3 3 HDD Retention Screws Step 4 Reinstall the HDD cover that was previously removed in the same position it was before ECN 380 QM87 Embedded System 3 3 SO DIMM Installation A WARNING Using incorrectly specified SO DIMM may cause permanently damage the ECN 380 QM87 Please make sure the purchased SO DIMM complies with the memory specifications of the ECN 380 QM87 To install a SO DIMM into a SO DIMM socket please follow the steps below Step 1 Remove the memory cover retention screw from the bottom panel Figure 3 1 Figure 3 4 Memory Cover Retention Screw Step 2 Locate the SO DIMM socket on the motherboard Figure 3 5 ECN 380 QM87 Embedded System Figure 3 5 SO DIMM Socket Step 3 Align the SO DIMM with the socket The SO DIMM must be oriented in such a way that the notch in the middle of the SO DIMM must be aligned with the
45. ocations of the USB connectors are shown in Chapter 1 ECN 380 QM87 Embedded System Step 2 Align the connectors Align the USB device connector with one of the connectors on the external peripheral interface See Figure 3 13 Figure 3 13 USB Device Connection Step 3 Insert the device connector Once aligned gently insert the USB device connector into the onboard connector 3 6 6 VGA Monitor Connection The ECN 380 QM87 has a single female DB 15 connector on the external peripheral interface panel The DB 15 connector is connected to a CRT or VGA monitor To connect a monitor to the ECN 380 QM87 please follow the instructions below Step 1 Locate the female DB 15 connector The location of the female DB 15 connector is shown in Chapter 1 Step 2 Align the VGA connector Align the male DB 15 connector on the VGA screen cable with the female DB 15 connector on the external peripheral interface SN Page 25 Integration Corp ECN 380 QM87 Embedded System Step 3 Insert the VGA connector Once the connectors are properly aligned with the insert the male connector from the VGA screen into the female connector on the ECN 380 QM87 See Figure 3 14 Figure 3 14 VGA Connector Step 4 Secure the connector Secure the DB 15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector 3 7 Powering On Off the System
46. ort UO port address is 3F8h and the interrupt IRQ 4 address is IRQ4 ECN 380 QM87 Embedded System gt 10 3F8h Serial Port UO port address is 3F8h and the interrupt IRQ 3 4 address is IRQ3 4 gt 10 2F8h Serial Port UO port address is 2F8h and the interrupt IRQ 3 4 address is IRQ3 4 gt 10 2C0h Serial Port UO port address is 2COh and the interrupt IRQ 3 4 address is IRQ3 4 gt 10 2C8h Serial Port UO port address is 2C8h and the interrupt IRQ 3 4 address is IRQ3 4 4 3 10 1 2 Serial Port 2 Configuration Serial Port Enabled Use the Serial Port option to enable or disable the serial port gt Disabled Disable the serial port gt Enabled DEFAULT Enable the serial port Change Settings Auto Use the Change Settings option to change the serial port IO port address and interrupt address gt Auto DEFAULT The serial port IO port address and interrupt address are automatically detected gt 10 2F8h Serial Port UO port address is 2F8h and the interrupt IRQ 3 address is IRQ3 gt 10 3F8h Serial Port UO port address is 3F8h and the interrupt IRQ 3 4 address is IRQ3 4 gt 10 2F8h Serial Port UO port address is 2F8h and the interrupt IRQ 3 4 address is IRQ3 4 gt 10 2C0h Serial Port UO port address is 2COh and the interrupt IRQ 3 4 address is IRQ3 4 Integration Corp ECN 380 QM87 Embedded System gt 10 2C8h Serial Port UO port address is 2C8h and the interrupt IRQ 3 4
47. ptions Serial device connectivity is provided by two RS 232 ports 1 2 Model Variations The model variations of the ECN 380 QM87 Series are listed below ECN 380 QM87 i5 R10 Intel Core i5 4400E 2 7 GHz 12VDC w o memory ECN 380 QM87 C R10 Intel Celeron 2000E 2 2 GHz 12 V DC w o memory ECN 380 QM87 i5 WD R10 Intel Core i5 4400E 2 7 GHz 9 V 36V DC w o memory ECN 380 QM87 C WD R10 Intel Celeron 2000E 2 2 GHz 9 V 36V DC w o memory ECN 380 QM87 i5 4G R10 Intel Core 5 4400E 2 7 GHz 12V DC 4GB memory pre installed ECN 380 QM87 C 4G R10 Intel Celeron 2000E 2 2 GHz 12VDC 4GB memory pre installed ECN 380 QM87 i5 WD 4G R10 Intel Core i5 4400E 2 7 GHz 9 V 36V DC 4GB memory pre installed P o I E E integration Corp ECN 380 QM87 Embedded System Model No Processor Power Memory ECN 380 QM87 C WD 4G R10 9 V 36V DC 4GB memory pre installed Intel Celeron 2000E 2 2 GHz Table 1 1 ECN 380 QM87 Model Variations 1 3 Features The ECN 380 QM87 features are listed below Intel Core i5 4400E 2 7 GHz Celeron 2000E 2 2 GHz Triple video outputs 2 x HDMI VGA Two 2 5 SATA 6Gb s HDD SSD drive bays 1 4 Technical Specifications The ECN 380 QM87 technical specifications are listed in Table 1 2 Specifications Chassis Color Silver Dimensions WxDxH 265 x 134 x 56 7 mm System Fan F
48. r Loss Last State Select AC power state with power is re applied after a power failure When Auto Power Button Function select Enabled the AC power loss will always power on Se Select Sereen Pl Select Item Enter Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit BSC Ara Use the Restore on AC Power Loss option to specify what state the system returns to if there is a sudden loss of power to the system gt Power Off gt Power On gt Last State DEFAULT The system remains turned off The system turns on The system returns to its previous state If it was on it turns itself on If it was off it remains off Azalia HD Audio Enabled Use the Azalia HD Audio option to enable or disable the High Definition Audio controller B e I E A integrationiCo Integration Corp ECN 380 QM87 Embedded System gt Disabled The onboard High Definition Audio controller is disabled gt Enabled DEFAULT The onboard High Definition Audio controller automatically detected and enabled Power Saving Function Disabled Use the Power Saving Function option to enable or disable power saving function gt Disabled DEFAULT Power saving function is disabled gt Enabled Enable to reduce power consumption in system off state USB Power SWI 5V DUAL Use the USB Power SW1 BIOS option to configure the power of USB port by software gt 5
49. r local authority or ask the shop where you purchased the product The mark on electrical and electronic products only applies to the current European Union Member States Please follow the national guidelines for electrical and electronic product disposal A 2 Maintenance and Cleaning Precautions When maintaining or cleaning the ECN 380 QM87 please follow the guidelines below A 2 1 Maintenance and Cleaning Prior to cleaning any part or component of the ECN 380 QM87 please read the details below The interior of the ECN 380 QM87 does not require cleaning Keep fluids away from the ECN 380 QM87 interior Be cautious of all small removable components when vacuuming the ECN 380 QM87 Turn the ECN 380 QM87 off before cleaning the ECN 380 QM87 Never drop any objects or liquids through the openings of the ECN 380 QM87 Be cautious of any possible allergic reactions to solvents or chemicals used when cleaning the ECN 380 QM87 Avoid eating drinking and smoking within vicinity of the ECN 380 QM87 A 2 2 Cleaning Tools Some components in the ECN 380 QM87 may only be cleaned using a product specifically designed for the purpose In such case the product will be explicitly mentioned in the cleaning tips Below is a list of items to use when cleaning the ECN 380 QM87 _ Cloth Although paper towels or tissues can be used a soft clean piece of cloth is recommended when cleaning the ECN 380 QM87 Water or rubbi
50. rt Fan Mode CONNSUTANON a RA acid 45 4 3 10 F81866 Super IO CONTEO si A ad a 47 4 5 10 1 Serial Port n Configuration is 48 4 3 11 F81866 E 51 4 3 12 Serial Port Console Redirection md dnni ot SEE RR RR ER 55 EG AAA EN 55 44 1 PCH IO CO EAN KE 4 4 1 1 PCI Express Configuration ugeet eelere 58 4 4 2 System Agent SA Configuration sr on ica 60 4 4 2 1 Graphics Configuration E 60 MN 63 e DO aaa 64 A NARDA 66 4 7 SAVE amp EXIT AA nina 67 A SAFETY PRECAUTIONS ees 68 Ad SAFETYPRECAUTIONS iia 69 Integration Corp ECN 380 QM87 Embedded System A EDGE E 69 A ANS Precautions AAA Ad 69 UNS E 70 A 2 MAINTENANCE AND CLEANING PRECAUTIONS sesscssrssssstesonscassansvessusnsedssoaserssousesniavsesees 71 A 2 1 Maintenance E 71 EEN NAAA 71 B HAZARDOUS MATERIALS DISCLOSURE ccsssssssssssssssssssssesssecssscssscssseeseeeees 73 RI HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS COMPLIANT UNDER 2002 95 EC WITHOUT Mrsctukr 74 ECN 380 QM87 Embedded System Figure 1 1 ei EE e dE 2 Figure 1 2 ECN 380 QM87 Front Panel r rnnnnvnnnnnnnnnvvnnnnvnnnnnnnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnneennn 5 Figure 1 3 ECN 380 QM87 Rear Panel mmvrnnnnvnnnnnvnnnvvnnnnvnnnnnvnnnnnnnnnvnnnnnvnnnnnnnnnnnnnnnnennnnnnnnnnnnnnnennn 6 Figure 1 4 ECN 380 QM87 Rear Panel rmnnnnnnvnnnnnvnnnnvnnnnvnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennn 7 Figure 1 5 Physical Dimensions M
51. stem Agent SA parameters Aptio Setup Utility Copyright C 2012 American Megatrends Inc Chipset VT d Capability Supported Check to enable VT d VT d Disabled function on MCH gt Graphics Configuration gt Memory Configuration gt Select Screen T J Select Item rez Selec Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults P4 Save Exit ESCH Arie Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 21 System Agent SA Configuration VT d Disabled Use the VT d option to enable or disable VT d support gt Disabled DEFAULT Disables VT d support gt Enabled Enables VT d support 4 4 2 1 Graphics Configuration Use the Graphics Configuration BIOS Menu 22 menu to configure the video device connected to the system Aptio Setup Utility Copyright C 2012 American Megatrends Inc Chipset Graphics Configuration ECN 380 QM87 Embedded System Select which of Primary Display Auto IGFX PEG PCI Graphics DVMT Pre Allocated 256M device should be Primary DVMT Total Gfx Mem MAX Display Or select SG for Switchable Gfx Primary IGFX Boot Display VBIOS Default Backlight Control Inverted gt Select Screen T V Select Item Bee Selec Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit i BSES asi i Version 2 15
52. t leak out or undergo abrupt change This product may contain replaceable sub assemblies components which have a shorter EFUP such as batteries and lamps These components will be separately marked Please refer to the table on the next page ECN 380 QM87 Embedded System Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Pb Hg Cd Chromium Biphenyls Diphenyl CR VD PBB Ethers PBDE Housing O O O O O O Display O O O O O O Printed Circuit O O O O O O Board Metal O O O O O O Fasteners Cable O O O O O O Assembly Fan Assembly O O O O O O Power Supply o lo O O O O Assemblies Battery O O O O O O O This toxic or hazardous substance is contained in all of the homogeneous materials for the part is below the limit requirement in SJ T 11363 2006 X This toxic or hazardous substance is contained in at least one of the homogeneous materials for this part is above the limit requirement in SJ T11363 2006 e e i E Ef integration Corp BET FS R AHE ROHS FEH HR BER gt RAT H SA ant ECN 380 QM87 Embedded System PANG HE E ROHS PRE gt DINARS PSR ee AS AP tn ERMA HEER HR BIE gt HARE RE AE ER
53. v Sets to 5V gt 5V DUAL DEFAULT Sets to 5V DUAL 4 4 1 1 PCI Express Configuration Use the PCI Express Configuration menu BIOS Menu 20 to select the support type of the PCI Express or PCle Mini slots ECN 380 QM87 Embedded System Aptio Setup Utility Copyright C 2012 American Megatrends Inc Chipset PCI Express Configuration Select PCI Express port speed M SATA1 PCIE Port PCIe Speed Auto Detect Non Compliance Device Disabled 9 s gt Select Screen Pd Select Item Butzeg Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save Exit MEET Biz Version 2 15 1236 Copyright C 2012 American Megatrends Inc BIOS Menu 20 PCI Express Configuration PCIe Speed Auto Use PCle Speed option to select the speed type of the PCI Express or PCle Mini slots The following options are available Auto Default Geni Gen2 Detect Non Compliance Device Disabled Use the Detect Non Compliance Device option to enable or disable the detect no compliance PCle device function gt Disabled DEFAULT Detect no compliance PCle device function is disabled gt Enabled Detect no compliance PCle device function is enabled If will take more time at POST if it is enabled ECN 380 QM87 Embedded System 4 4 2 System Agent SA Configuration Use the System Agent SA Configuration menu BIOS Menu 21 to configure the Sy

ECN-380-QM87_UMN_v1.00

Contents

Download Pdf Manuals

Related Search

Related Contents