C5500 User Manual - Surveillance Cameras
Contents
1. Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 2 Includes e AC Adaptor DVR e 8GB Memory Card e User Manual Introduction The AC Adaptor crafted by SleuthGear is a high definition covert camera and recording device disguised as a power supply The AC Adaptor is created for discreet surveillance from any wall outlet You can use the product in two ways continuously record or record only when the camera detects activity motion The Zone Shield AC Adaptor is designed for quick plug and play set up so surveillance can begin right out of the box Some best uses for this device are Aging parents Parental control know you re Nanny Protect your home when you have workers or domestic help Asset protection and much more Simply unplug the camera to move quickly from room to room or office to office anytime you require surveillance Quick Setup Guide Remove the device and memory card from the packaging Remove the cover from the back of the device Properly install the memory card into the memory card slot EWN Select the desired recording mode by moving the switch to C for Continuous or M for Motion Detection Nn Reinstall the cover onto the back of the device and plug it into any compatible wall outlet to begin surveillance Features e High definition camera e 1280 720P HD resolution recording e Supports up to 32GB memory card storage for up to 9 hours of video record2. Hidden Video by SleuthGear Table of Contents Warnings amp Precautions Quick Setup Guide oiera o Fenny esas es dT KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 1 Do not open modify the device as it may cause damage to the unit and void the Warranty For internal repairs consult your dealer or an Authorized Service Center sro Do not use any accessories or power supplies other than what comes with the device otherwise it could void the warranty Protect from humidity Do not put it in water and be careful to protect it from rain sea water or high humidity environment Do not operate the unit near a bath tub shower sink swimming pool etc Protect from high temperatures To avoid mis operation of the device only use in temperature of 0 40 C 32 104 F Do not bring the device suddenly from a hot to a cold place or vice versa This may cause damage to the inside of the unit by creating condensation EU Environmental Protection The symbol of crossed out garbage shows that this product should not be treated as lt 4 household waste as it falls into the category of electric electronic equipment for gums cecycling This electronic device should not be disposed of in regular trash We strongly advise you to contact your local authority for proper disposal of this product KJB Security www mysleuthgear com 800 590 4272
3. sleuthgear and on twitter sleuthgear 9 Manufacturer s Limited Warranty Manufacturer warrants all Covert Video and Sleuth Gear Hidden Video Products Product assembled and sold by Manufacturer to be free of defects in material and workmanship subject to the following conditions The duration of Manufacturer s warranty with respect to the Product is limited to one 1 year from the date of sale to the original consumer purchaser only for Products delivered within the fifty 50 states of the United States District of Columbia or the possessions and territories of the United States No other express warranties are made with respect to any Product All implied warranties including warranties of merchantability and fitness for a particular purpose are limited to the warranty period set forth above This warranty is not transferable and applies only to the original consumer purchaser of the Product Manufacturer will as its sole obligation under this warranty replace or repair at its option any Product that does not conform to this warranty Under no circumstances will the Manufacturer issue credit or give a refund for Product covered by this warranty Furthermore under no circumstances will Manufacturer be liable for any incidental or consequential damages under this warranty or any implied warranties What is not covered This limited warranty does not cover Products that in Manufacturer s judgment have damage resulting from any i de
4. SES GENERATES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH INSTRUCTIONS MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 10
5. SSESSION AND USE OF THIS PRODUCT BY PURCHASING THIS PRODUCT THE BUYER REPRESENTS THAT IT WILL INDEMNIFY THE MANUFACTURER AND OR DISTRIBUTOR AND HOLD THEM HARMLESS FOR ANY POSSESSION USE AND OR MISUSE THAT VIOLATE ANY FEDERAL STATE OR LOCAL LAW OR REGULATION REGARDING AUDIO AND OR VIDEO DEVICES BUYER AGREES TO CONSULT WITH AN ATTORNEY AT LAW REGARDING POSSESSION OR APPROPRIATE USE OF A COVERT DEVICE NOTE THAT LAWS AND REGULATIONS VARY FROM STATE TO STATE IF BUYER EXPORTS THIS PRODUCT THE BUYER WILL COMPLY WITH US EXPORT CONTROL LAWS AND ANY APPLICABLE DEPARTMENT OF COMMERCE STATE AND TREASURY REGULATIONS GOVERNING EXPORTS AND SALES TO PROHIBITED END USERS DIVERSION OR RE EXPORT CONTRARY TO U S LAW IS PROHIBITED BUYER SHALL COMPLY WITH ALL APPLICABLE FEDERAL STATE AND LOCAL LAWS AND REGULATIONS GOVERNING THE SALE OF THIS PRODUCT INCLUDING U S EXPORT CONTROL LAWS AND THE U S DEPARTMENT OF COMMERCE AND TREASURY REGULATIONS GOVERNING SALES TO PROHIBITED END USERS PART 15 LOW POWER ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT WITHOUT THE EXPESS AUTHORIZATION OF THE MANUFACTURER COULD VOID THE USER S AUTHORITY TO OPERATE THIS EQUIPMENT RULE 15 21 OF THE FCC THIS EQUIPMENT HAS BEEN TESTED AND HAS BEEN FOUND TO BE IN COMPLIANCE WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE PURSUANT TO PART 15 OF THE FCC RULES THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTIONS AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION THIS EQUIPMENT U
6. e detected Because of these features the files in this mode will vary from 30 seconds up to 5 minutes 4 This device is equipped with an On Off switch for the DVR on the bottom of the housing To turn the DVR off press and hold the On Off button for 5 seconds To turn the DVR back on simply press and immediately release the button which resumes the selected recording mode Note To prevent corruption of the memory card and the recorded files always turn the device off using the On Off button prior to removing it from the power outlet Playback Turn off the device using the On Off switch and then remove it from the power outlet Remove the cover to access the memory card Place the memory card into an adapter or card reader on a computer Navigate to the recorded video files Use a media player such as Windows Media Player or VLC www videolan org to playback the video files Backup save or delete the files as desired 7 Use the computer s safe remove function to safely release the memory card from the operating system prior to physical removal in order to prevent corruption of the card and any remaining files nA BW Ne ON KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 7 Frequently Asked Questions Q Can I use this adaptor to power any devices A No this is a digital video recording device only and does not functio
7. ing e 2 recording modes Continuous or Motion detection e Time and Date video stamp e Easy Access On Off switch KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 3 Setup 1 Remove the cover from the back of the device by pushing in slightly to release the catch and then down to slide it off 2 Install the memory card by inserting it until secured in the memory card slot You should hear or feel a click once the slot secures the card If it will not fully insert into the slot flip the card over and try again Note Forcing the memory card to be inserted in the improper orientation may damage the device and void the warranty KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 4 3 To set the time and date stamp the settings file must be generated onto the memory card by the device modified then read and recorded a Insert the device into a power outlet and wait approximately 30 seconds before removing it This formats the card and generates a text file for time settings b Remove the memory card by gently pressing down on it and then lifting off When pressing down you may hear or feel a click once the slot releases its hold on the card Upon lifting off the card will be released and eject slightly so that it can now be removed c Insert the memory card into an adapte
8. mplied warranties last or the exclusion or the limitation of incidental or consequential damages So the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may also have other rights that may vary from state to state NO PERSON IS AUTHORIZED BY MANUFACTURER TO MODIFY OR ADD TO THIS LIMITED WARRANTY For warranty information on Products delivered outside the United States please contact the original place of purchase DO NOT ATTEMPT TO RETURN PRODCUT TO ORIGINAL MANUFACTURER AS THIS PRODUCT HAS BEEN MODIFIED AND IS NO LONGER SUBJECT TO ORIGINAL MANUFACTURER S WARRANTY IN THE CASE OF A DEFECTIVE PRODUCT CONTACT PLACE OF PURCHASE FOR RETURN PROCEDURE IT IS THE USER S RESPONSIBILITY TO ENSURE THAT THIS EQUIPMENT IS USED IN ACCORDANCE WITH THE LAW S OF THE JURISDICTION IN WHICH THIS EQUIPMENT IS UTILIZED THIS PRODUCT MAY BE SUBJECT TO THE JURISDICTION OF THE U S WIRE AND COMMUNICATIONS ACT 18 UNITED STATES CODE 8 2510 2522 HEREINAFTER REFERRED TO AS ACT REGARDING SURREPTITIOUS RECORDING DEVICES THE USES OF SUCH PRODUCTS ARE REGULATED BY THE ACT ADDITIONALLY THE LAWS OF SOME STATES COUNTIES CITIES OR LOCALITIES MAY PROHIBIT THE POSSESSION AND OR USE OF THIS OR SIMILAR PRODUCTS IT IS THE RESPONSIBILITY OF THE RETAIL BUYER AND OR FINAL CONSUMER HEREINAFTER REFERRED AS BUYER TO ASCERTAIN UNDERSTAND AND OBEY ANY AND ALL APPLICABLE LOCAL STATE AND FEDERAL LAWS REGARDING PO
9. n as an actual power supply There is no current output through the attached cable Q What size memory cards can I used in this device A Most memory cards of up to and including 32GB capacity are supported If a memory card does not appear to work try removing and formatting the memory card using a computer before trying it in the device again Q Why did I not get a recording when I know there was motion in front of the device A The motion was not detected because it was too little too quick or too far away Make test recordings to discover the limits of detection in your given placement and environment Q Why will my video file not play or the file is corrupted A If the device is not properly powered down prior to removing it from power the files on the memory card or the memory card itself may become corrupted Make sure to always properly power down the device according to the directions in the Using Your Device section Q Why do I not have the time and date displaying on the recorded files A The time and date must be setup before they will display on the recorded files prior to first time use This also may be required again when the device has been left unplugged for a significant duration of time For instructions on how to setup the video timestamp see the Setup section Q Why do I only see part of my desired surveillance target A Placement of any device is a very important step in setup Be sure to make test reco
10. ompatible wall outlet in the desired surveillance area It will immediately power on and begin to boot Boot time is approximately 3 seconds during which an internal red LED light will remain lit and is visible by looking into the vents on the side of the adaptor 2 Once booted the device will enter the selected recording mode confirmed by the following internal LED status indicators which can be seen through the side vents reflecting inside the device a Flashing Red the device is recording in Continuous mode b Flashing Green the is device is recording in Motion Detection mode c No lights the device is in Motion Detection mode but no motion is detected 3 In either mode video will be recorded and saved as video files onto the memory card and will over write the oldest files one at a time once the memory card has reached its full capacity a Continuous Recording will be constant and saved in 5 minute long files for quick amp easy review and backup KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 6 b Motion Detection Once the camera has detected motion recording will begin Recording will continue as long as motion is detected but will stop 30 seconds after motion is no longer detected If motion is detected for more than 5 minutes the file will be saved and a new file started this process will repeat as long as motion continues to b
11. r or card reader on a computer d Open the text file on the memory card Keeping the format as is change the O after Updata to update the date and time then save the file as the same name on the memory card Year Month Day Hour 24HR format Minutes Seconds 1 YY YY MM DD HH MM SS CS Removable Disk E Jog t File Edit View Favorites Tools Help td Back 7 SF Search E Folders Ei Address lt a Esi Folders FORMAT E Desktop Text Document cg My Documents F My Computer TIME S OS Cs Text Document 4 DVD Drive D KB Removable Disk E gt DCIM 3 objects 160 bytes P My Computer r TIME Notepad Joe File Edit Format View Help Upd ata 0 Time 2014 08 08 08 08 08 In order to update the time settings the Updata value must be 1 Dand Time s format can not change e Insert the memory card securely back into the slot on the device f It is recommended that the device be power cycled one time after setting the time and date stamp before making recordings KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 5 4 Select the recording mode by moving the switch either left or right a M Motion Detection recording b C Continuous recording 5 Reinstall the cover onto the back of the device which is now ready to use Using Your Device 1 Plug the device into any c
12. rdings of the desired area of surveillance prior to final setup to ensure the device can perform as desired in your given environment This should not only include what area can be captured by video but also testing the ability to properly trigger recording in the area if using Motion Detection mode Q Why can t I find my recorded files on my memory card A Recorded files are saved inside folders on the memory card As with almost all video and photo devices the files are saved inside a folder named DCIM On this device the files are actually saved within folders that end in the digits for month and day found inside the DCIM folder Within those dated folders the files are saved in numerical sequence of their occurrence KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook sleuthgear and on twitter sleuthgear 8 Q What is the FORMAT text file the device puts onto the memory card A If you wish to have the device format your memory card change the number in the file from 0 to and save it The next time you insert the memory card into the device and plug it in it will wipe all data from the card It is recommended that the device be power cycled one time after performing the format before making recordings Specifications Camera Video Files Memory Other 14 F 130 F L 2 5 W 2 H 1 75 3 2 oz KJB Security www mysleuthgear com 800 590 4272 Find us on Facebook at facebook
13. viation from Manufacturer s operating instructions as printed in Manufacturer s catalog or on any packaging labels or other literature provided with a Product ii installation of a Product in a manner which is inconsistent with Manufacturer s written instructions iii alteration modification of or tampering with a Product iv misuse v neglect vi abuse vii accident viii power surge static electricity or other electrical discharge ix normal wear and tear x commercial use xi service by anyone other than a Manufacturer authorized repair facility or xii other improper application installation or operation of the Product Or xiii have been purchased from inventory clearance or liquidation sales or other sales in which Manufacturer expressly disclaims its warranty obligation pertaining to the Product How you the Customer can get service To obtain warranty service during the warranty period you must return the defective Product with the original receipt to the original place of purchase Contact them for return instructions If warranty service is needed at any time during the warranty period the purchaser will be required to furnish a sales receipt proof of purchase indicating the date of purchase amount paid and place of purchase Customers who fail to provide such proof of purchase will be charged for the repair of any Product How state law relates to the warranty Some states do not allow limitations on how long i
Download Pdf Manuals
Related Search