Home

FUJITSU TWAIN 32 Scanner Driver

1. Copyright PFU LIMITED 2006 Trademarks Microsoft Windows Windows NT and Windows Server are registered trademarks of Microsoft Corporation in the United States and or other countries Intel MMX Pentium are registered trademarks of Intel Corporation Adobe Acrobat are the trademarks or registered trademarks of Adobe Systems Incorporated Adaptec is a registered trademark of Adaptec Inc EZ SCSI is a trademark of Adaptec Inc Other product names are the trademarks or registered trademarks of the respective companies ii Organization This manual explains how to install and use this driver and how to use the TWAIN scanning utility TWAIN This section gives an overview of the TWAIN specification Installation This section explains the procedure for installing the environments in which this driver may operate Using the Driver This section explains how to use the driver Using the Utilities Use of the following utilities is explained Gamma Pattern Editor FUJITSU Scanner Control Center Firmware Updater Trouble shooting This section explains the possible causes of error messages and operation errors and the corresponding recommended actions Appendix The appendix contains the specifications of image scanners ill Contents T CUMING csi a 1 1 1 Characteristics of this DIiver cccccccccccseeeeceeeeseeeeceeeeseeeeseeeeseueessaeeeseeenees 1 T2 Operating ENVIFOMMEIN bassi AO 1 NOs E
2. This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 124 Image processing function Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction De Screen SEE Selectable Edge Enhancement Reverse 256 Color 8 Color With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation Individual setting Enabled Brightness Threshold Contrast Imprinter Endorser With imprinter option Reverse side minimum left margin printing position of 7 mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI II USB 2 0 Preview Enabled at Flat bed scanning only Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection Page End Detect Automatic Page Size Detect Black Background Overscan Enabled when Black Background is selected Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre
3. The application can detect documents on a specific type of form special paper The application must support this function None No detection Scanning is done without change Include and Continue After the special paper is detected scanning continues The data on the special paper is also valid Include and Stop After the special paper is detected scanning stops The data on the special paper is also valid Exclude and Continue After the special paper is detected scanning continues The data on the special paper is excluded and will not be transferred to the application Exclude and Stop After the special paper is detected scanning stops The data on the special paper is excluded and will not be transferred to the application This option may not be supported for some scanners See Relevant Image Scanner Specification in the Appendix Multifeed Detection Multiteed Detection None This option detects a multifeed occurs when two or more documents are sent based on the set condition If a multifeed is detected when this setting has been turned on the device will stop and an error message output None Multifeed detection is not performed Hardware Setting A multifeed is detected based on the device setting Check thickness The thickness of the transmitted document is checked by the sensor in the device A multifeed is detected by detecting changes in the thickness when more than one document is sent 34
4. 1 2 Operating Environment This driver can be used in the following systems e A personal computer recommended Intel Pentium 100MHz or higher on which one of the following operating systems are installed Microsoft Windows 95 Microsoft Windows NT Server Version 4 0 Installation of Service Pack 3 or later recommended Microsoft Windows NT Workstation Version 4 0 Installation of Service Pack 3 or later recommended In case of Windows 98 Windows Me Windows 2000 Windows XP or Windows Server 2003 FUJITSU TWAIN32 Version 9 18 is installed Refer to FUJITSU TWAIN32 Version 9 18 User s Guide e Adaptec SCSI adapter or Fujitsu FMV SCSI adapter In some cases the driver may not operate with the above systems Please check in advance with your place of purchase Notes are provided on the accepted SCSI adapters in README TXT which is included in the installation media Please read these notes before use e Adaptec EZ SCSI Pro Version 4 5 or later or the following 32 bit versions of ASPI Manager included for example in the Adaptec SCSI installer for Windows 95 Windows NT or on Fujitsu SCSI driver disk V1 2 Windows 95 Windows 98 Windows NT 4 0 V4 01 or later Windows 2000 Windows Me V4 60 or later Windows XP Windows Server 2003 V4 70 or later In case of Windows 98 Windows Me Windows 2000 Windows XP or Windows Server 2003 FUJITSU TWAIN32 Version
5. Use Memory on Scanner function Enabled Batch Detection Enabled Multifeed detection Enabled Check overlapping length Pre Pick Enabled Check Over skew Disabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the printing position printing will begin 5 mm from the edge of the page 159 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color output Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Isolation specification Background compensation fi 5750C Desktop Color CCD Reduced optical system Document fixed Flat bed FB Automatic Document Feed ADBF Simultaneous double sided scanning Long page scanning 305mm x 864mm Fluorescent tube White 600 dpi Standard 50 dpi to 600 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled 24bit B W 0 9 sec or less 200 dpi A4 Color 0 9 sec or less 200 dpi A4 B W Single sided 55 pages per m
6. Windows Server 2003 When Windows 95 Windows 98 Windows NT 4 0 Windows 2000 Windows Me Windows XP and Windows Server 2003 are referred to collectively they are simply referred to as Windows Unless otherwise indicated explanations refer to Windows 95 Windows 98 Windows NT 4 0 Windows 2000 Windows Me Windows XP and Windows Server 2003 collectively High Risk Activity The Customer acknowledges and agrees that the Product is designed developed and manufactured as contemplated for general use including without limitation general office use personal use household use and ordinary industrial use but is not designed developed and manufactured as contemplated for use accompanying fatal risks or dangers that unless extremely high safety is secured could lead directly to death personal injury severe physical damage or other loss hereinafter High Safety Required Use including without limitation nuclear reaction control in nuclear facility aircraft flight control air traffic control mass transport control medical life support system missile launch control in weapon system The Customer shall not use the Product without securing the sufficient safety required for the High Safety Required Use In addition PFU shall not be liable against the Customer and or any third party for any claims or damages arising in connection with the High Safety Required Use of the Product
7. and type number of the computer being used Manufacturer and version of the Windows OS whether Windows has been updated Name and version of the display driver Name and version of the printer driver Resolution 1024 x 768 number of colors and number of dots or points of the screen Product name of the SCSI adapter and name and version of the SCSI driver Error occurrence processing the simpler the processing the easier it is to determine the cause Also we would appreciate it very much if you could kindly verify the following items prior to receiving our maintenance service Is the power turned on Is the cable connected correctly Is the correct image scanner driver selected 162 FUJITSU TWAIN32 Scanner Driver Utility Scanner Utility for Microsoft Windows User s Guide 32 bit version First Edition July 2005 2nd Edition August 2005 3rd Edition November 2005 4th Edition May 2006 Sth Edition June 2006 6th Edition June 2006 7th Edition July 2006 All Rights Reserved Copyright PFU LIMITED 2006 e The contents of this document may change for improvements without prior notice e PFU LIMITED takes no responsibilities for infringements of third parties patents or other rights that may stem from the use of the data in this document e Unauthorized reproduction of this document is prohibited
8. the customer settings can be used 128 Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled SRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled 129 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Isolation specification Background compensation fi 4640S Desktop Reduced optical system Document fixed Flat bed Automatic Document Feed ADF Long page scanning 297mm x 1387mm Black amp White only Xe discharge tube Green 400 dpi Standard 50 dpi to 800 dpi at steps of I dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 0 9 sec or less 200 dpi A4 Single sided 45 pages per minute 200 dpi A4 55 kg Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperat
9. values are converted to 255 output values T1 6 How to Use the FUJITSU Scanner Control Center 6 1 6 2 Outline This software that is resident in the system continuously monitors the scanner connected and starts the target application in response to an instruction from the operation panel in the scanner Pressing the start button on the scanner starts the application that has been set in advance And by using this software you can replace consumables and adjust offset of the connected scanner For applicable models see Relevant Image Scanner Specification in the Appendix How to Start the FUJITSU Scanner Control Center Select as follows Start Program Scanner Utility for Microsoft Windows then FUJITSU Scanner Control Center If this application is started it is stationed in the system and then an icon is displayed on the task tray An icon indication changes to show how the scanner is connected as follows 1 The scanner can be used 2 The scanner power is turned off and not connected a Right clicking the icon displays the following pop up menu Scan Rescan Scanner Option Select Scanner Help About Exit ae 7 33PM Left clicking the icon displays the scanner being connected as shown below The scanner that has been monitored by this application is indicated with a check mark w Fi 4530Cdj Mah 7 56 PM 78 6 3 Pop up Menu
10. 0 mm is specified as the printing position printing will begin 5 mm from the edge of the page 157 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color output ADF scanning speed ADF paper chute capacity Document size Supported regular paper Isolation specification Background compensation fi 5650C Desktop Color CCD Reduced optical system Automatic Document Feed ADBF Simultaneous double sided scanning Long page scanning 305mm x 864mm Fluorescent tube White 600 dpi Standard 50 dpi to 600 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled 24bit B W Single sided 55 pages per minute 200 dpi A4 55 kg Double sided 55 pages per minute 200 dpi A4 55kg 110 screens per minute Color Single sided 55 pages per minute 200 dpi A4 55 kg Double sided 55 pages per minute 200 dpi A4 55kg 110 screens per minute Maximum 200 sheets ream weight 80 kg A4 High quality paper normal temperature and humidity Minimum 53mm x 74mm Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled Brightness Thres
11. 00000000 Cancel Version Printing Specify the beginning position of the character string to output on the scanned image data X Offset Specify the position of the width direction from the left end of document Y Offset Specify the position of the length direction from the top of document Unit Select either mm or inch as the unit of offset value Counter Specify the rule of the counter value used in the String Initial Value Specify the initial count when the scanning starts Step Specify the counter increment decrement Counter Select whether to increase or decrease the specified step value For example In case of Initial Value 0 Step 2 Counter Increment 0 2 4 6 8 String Specify the output string The following characters can be outputted by the Imprinter Alphabet Letters A Z a Z Numeric Characters 0 1 9 49 Symbols P 4 3 lt gt 7 _ Other Space The space is ignored when it is entered at the head of String The following definitions can be used They may also be selected from the menu which is displayed by clicking on La YYYY The year is printed in four digits using the Western calendar YVYY The year is printed using the two digits of the Japanese calendar current or Heisei era YY The year is printed in the last two digits of the Western calendar MMM An English abbreviation of the month is printed
12. 2 Diagnosis taD ser atina ca ecciustiee ese ceece ss E 84 043 Device MO fc 8 emer en Roe ge ee mm ne ra ee Soe 85 64A Device Seting ta Dai a A scat atime 86 Using the Firmware Updatel cccscssscesscsssseseesssseenseeesenseoees 91 s HROUDICSMOOUING sisesed Gszconneieuecevendeaseessccsdesatnncacieaseacnezacessecssceueenduane 93 Oils ENOL Wie SSAC Cs ia iecerietacninatinceinetdide hathocticsinctneninctatamanananeniee 93 8 1 1 Messages from the TWAIN DIivel ccccccceceececeeeeeneeeneeeeceeeeseeeeeneeensneensaees 93 8 1 2 Error messages relating to gamma correction pattern editing cceeeeeeeees 102 8 1 3 Messages concerning to FUJITSU Scanner Control Center ccceeeeee 103 8 1 4 Messages relating to the Firmware Updater cccccccseeceeeeeeeeeseeeeeeeeneeesaees 8 2 Device Trouble Related to Operation S AD DCNIGIX isis tcisuvsetsavantcssmviaatenaiasanenns 9 1 Relevant Image Scanner Specification 9 2 Maintenance Service ccecceeeeeees vi 1 Outline 1 1 Characteristics of this Driver e This driver complies with TWAIN regulations V1 9 the latest version as of June 2006 which are global standards for image scanners The driver can be used in all TWAIN compliant applications e This driver also supports an image scanner that has the double sided scan function If the application supports continuous scan a double sided document can be scanned
13. 9 18 is installed Refer to FUJITSU TWAIN32 Version 9 18 User s Guide e RAM of 32 megabytes or more 64MB or above is recommended e Free hard disk space of 10 megabyte or more Except the range for the Image storing e CD ROM drive required for installation e Mouse recommended 1 3 Explanatory Notes The descriptions in this manual are prepared based on the following rules 0 Menus and buttons The menus and buttons used in the program description are enclosed in Example File menu OK button Keyboard The keytop indications comply with the standard keyboard of the Fujitsu FMV series Major differences between the Fujitsu FMV keyboard and other keyboards are shown below FMV keytops Other possible keytops Alt Previous screen GRPH Ctrl CTRL Esc ESC Enter Return Shift SHIFT Back space Backspace BS Fl PFI f 1 Terms related to mouse operation Terms related to major mouse operations are explained below Click To press and release the mouse button Double click To quickly press the mouse button twice Drag Move the mouse while keeping the mouse button pressed Notes on operation procedures If some menus need to be operated in a certain order the procedural order is described as follows A B C In accordance with this description operation A is executed first followed by B and C in that order Figures Figures and screen operations in this guide refer to Microsoft Win
14. A4 80 m 50 screens per minute Color Single sided 30 pages per minute 150 dpi A4 80g m Double sided 30 pages per minute 150 dpi A4 80 m 60 screens per minute Maximum 50 sheets A4 80g m High quality paper normal temperature and humidity Minimum 53mm x 74 mm Maximum 216mm x 355 6mm lt ADF gt Maximum 216 mm x 297 mm lt Flat Bed gt A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern 255 steps at Color Grayscale scanning Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 154 Image processing function Simplified Dynamic Threshold SDTC De Screen Edge emphasis 256 Color 8 Color 4bit Grayscale Reverse Individual setting Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Interface SCSI I USB1 1 2 0 Preview Enabled at Flat bed scanning ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and S
15. Check length The length of the transmitted document is checked by the sensor in the device A multifeed is detected by detecting changes in the length when more than one document is sent Check thickness and length The thickness and length of the transmitted document are checked Check overlapping The overlapping of the transmitted document is checked by the sensor in the device A multifeed is detected by overlapping when more than one document is sent Check overlapping and length The overlapping and length of the transmitted document are checked For example the detection accuracy can be improved by using Check thickness or Check overlapping for continuous scanning of forms that have different lengths and Check length for scanning of forms that have different thicknesses Depending on scanner model the selectable items are different Refer to Relevant Image Scanner Specification of Appendix Pre Pick Pre Pick Panel Setting It specifies whether a document is picked and carried in front of the scanning position before starting scanning operation at the ADF scanning Disable Pre Pick is not performed A document is picked and carried in front of the scanning position after starting scanning operation Enable Pre Pick is performed A document is picked and carried in front of the scanning position before starting scanning operation Panel setting The setting of device is followed When selecting En
16. Displays version information concerning to this application Exit Terminates this application 80 6 4 Option 6 4 1 Common tab Sets up the application to be started when the Start or Scan button of the scanner is pressed FUJITSU Scanner Control Center Common Diagnosis Device Info Device Setting Start S can Path Argument Start try gi Rur Normal r J Use a Plug in E E Install Path Specifies a file name of the application to be started with its absolute pathname A file can be also selected directly by using the button Argument Specifies an argument to be passed when starting the specified application This item can be omitted Start in Specifies a default folder for starting the application A default folder can be also selected by using the button This parameter can be omitted Run Specifies the display size of the application to be started 81 Use Plug In Checking this check box specifies a plug in A plug in is an additional program for adding a new function to the application W Use a Plugdn Scand ll 21 F Setting lristall Setting Sets a plug in in accordance with the following procedure e Pressing the Setting button after selecting a target plug in name in the plug in list displayed displays the plug in setting screen Pressing the OK button after setting each item reflects the s
17. Edge Filler Digital Endorser Drop out color Enabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the endorser print position printing will begin 20 mm from the edge of the page Batch Detection can not be used with following Caching Use Memory on Scanner or Use Both Memory 145 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Gray scale 8 bits output Halftone Patterns Color ADF scanning speed Hopper capacity Document size Supported regular paper Cutout specification Background compensation fi 4990C Desktop Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning 297mm x 878mm Black amp White only Fluorescent tube White 400 dpi Monochrome 400 300 240 200 150 100dpi Color 400 300 200 150 100dpi 10 bit 1024 levels Enabled Dither matrix Error diffusion 24bit lt Monochrome Asynchronous Scanning gt Single sided 90 pages per minute 200 dpi A4 55 kg Double sided 90 pages per minute 200 dpi A4 55 kg 180 screens per minute Maximum 1 000 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm or 297mm x 878 mm with Long Page scanning mode A3 A4 A4 L
18. Grayscale levels internal Grayscale output Halftone Patterns Color Scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower fi 4340C Desktop Color CCD Reduced optical system Document fixed Flat bed Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning 216mm x 1541mm Black amp White only Fluorescent tube White 600 dpi Standard 50 dpi to 800 dpi at steps of Idp1 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 24bit B W 1 2 sec or less 200 dpi A4 Color 2 8 sec or less 200 dpi A4 B W Single sided 40 pages per minute 200 dpi A4 55 kg Double sided 40 pages per minute 200 dpi A4 55kg 80 screens per minute Color Single sided 16 pages per minute 200 dpi A4 55 kg Double sided 24 5 pages per minute 200 dpi A4 55kg 29 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 216 mm x 297 mm or Maximum 216mm x 1541 mm with Long Page Scanning Mode A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal Specified one location Enabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern 255 steps at Color Grayscale scanning 3 internal types can be downloaded
19. OFF Data source processing is closed Turn ON the scanner and re scan Cause User response Scanner may be turned OFF during scanner use Turn ON the scanner and re scan If the error persists reboot the PC e Paper jammed in the ADF Cause User response Hopper Cause User response Cause User response Cause User response A paper jam occurred in the device Turn off the power of the device then remove the paper from inside the device Removing the paper by using excessive force will result in device failure so be careful When the paper jam occurs repeatedly clean inside of the scanner The ADF is open Close the ADF and set the document on ADF paper chute or The ADF cover is open Close the ADF cover and set the document on ADF paper chute or Hopper No paper on ADF paper chute or Hopper Although ADF was selected as the paper feeding method no paper is found on ADF paper chute or Hopper Select another paper feeding method or set the document on ADF paper chute or Hopper The ADF is open or No paper on ADF paper chute or Hopper The ADF cover is open or there is no paper on ADF paper chute or Hopper Close the ADF cover or load paper Insufficient buffer memory size of scanner device for current scanning parameters Please reduce the scanning area or the resolution or install additional memory in the scanner Cause User response A memory option has not be
20. Reverse This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 152 Individual setting Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Imprinter Endorser With Imprinter option Reverse side minimum left margin printing position of 5mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Font orientation Vertical Normal Horizontal Normal Narrow Bold font Enabled 1 Interface SCSI I USB1 1 2 0 Preview Enabled at ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Use Memory on Scanner function Enabled Batch Detection Disabled Multifeed detection Enabled Check overlapping length Area selection Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compre
21. Sample before processing and After after processing on this dialog When you change a setting item the effect of the setting item is reflected in the image After You can specify the items checking their effect Advance Front Advance Front Image Mode 24bit Color Image Mode v Color Quality Color Gray Sample x Preset Gamma Color select Common setting Color Shadow Highlight Contrast Brightness Gamma Shadow o Highlight 255 Default h OK Cancel Help Deiat Cancel Hep lt Image Mode Color selected gt lt Image Mode Grayscale selected gt Figure Advance dialog Color Grayscale Shadow Highlight Color Grayscale Shadow T Highlight 255 Shadow The highlight allows the darkest part of the document to be controlled The higher the shadow value the darker the image Highlight The highlight allows the brightest part of the document to be controlled The higher the highlight value the lighter the image Any levels on the document outside these settings are flooded all O or 255 while the interval between the shadow and highlight settings are equally divided into 255 levels which are used to create the output images This means that if the shadow and highlight settings are close to each other the contrast for that interval in the scanned document will be very strong but with all other areas maximizing high or low 61 Contrast Brightnes
22. Scan Start the application which is selected on Common tab of Option Rescan Scanner Rescans the scanner that is currently connected A scanner that is not recognized by the OS cannot be found even though it is rescanned Option You can set up the following items e Settings of the application to be started when the Start or Scan button of the scanner is pressed gt Common e Diagnosis of the selected scanner gt Diagnosis e Indication of the functional information of the selected gt Device info scanner e Replacement of the consumables Setting of the power management Adjustment of the offset and magnificent gt Device setting Select Scanner When multiple scanners are connected select a scanner to be monitored With this application only one scanner can be monitored at a time If multiple scanners are connected scanner switching is required to monitor the individual scanners Select a scanner to be monitored in the list of scanners to be connected The list is given below Select Scanner x Curent Device Device f 45a0Cdi Host ID 2 SESH 5 ne D 5 fi 4530Cd Selected Device Device f 4530Cd HostID 2 SCSIID 5 Left clicking the task tray icon displays connected scanner names on the pop up menu Itis also possible to select a scanner on this menu 79 Help Displays help information concerning to this application About
23. Setting Front Back M Individual Setting When a scanner that allows duplex scanning is used specifies the page which sets the image scanning information To scan using the same settings as those for Front side and Back side clear the checks in the Individual Setting checkbox on the Front and Back tabs A single Duplex tab will be displayed at the left so that the same image scanning information can be set for Front side and Back side To scan using different settings for Front side and Back side check the Individual Setting checkbox on the Front and Back tabs Two tabs Front and Back will be displayed at the left Select each tab and enter the desired settings This is only effective when ADF Duplex is selected for the method of paper feed For scanner types which permit duplex scanning see Relevant Image Scanner Specification in the Appendix Resolution Resolution SS 300 x 300 300 dpi Predefine Specifies the number of pixels dots per inch Select a predefined resolution or Custom from the list Customize enables detailed settings by a pixel unit Resolution ae Mor mal T E W Fredefine By marking Predefine checkbox you can select one from three predefined settings as Normal Better Best to scan documents instead of configuring settings by yourself Otherwise you can change the details of the predefined settings on the Resolution Setting window wh
24. User response Input a value inside the allowed range Refer to Help of the item or the User s Guide for the correct range e This file cannot be removed because it is specified in other side Cause An attempt was made to remove a file using the dither pattern or gamma download pattern file setting dialog However the file is being used for the other side front side if back side or back side if front side User response Before removing the file change the setting of the other side and then remove e The initial value contains an invalid value The default standard value is set Cause A value outside the specified range or invalid text was found in the initial value data file the specific item involved is indicated by Entry XXXXX If the file has been modified the setting value for the item may be wrong If the file has not been rewritten the file may have been damaged User response The value is set to a standard value Be sure to check the hard disk chkdsk scandsk and check for computer viruses regularly e The value is higher than the maximum scanning size Either the resolution value or the scanning area has to be reduced Cause A value exceeding the data capacity of the scanner was specified As the resolution is increased the amount of data to be scanned also increases User response Decrease the resolution or reduce the size of the scan area 93 The value for custom paper is higher than the maximum scan s
25. also displayed in the part of the red frame in the figure To reset the consumables counter after replacing consumables click the Clear button Depending on the device this operation can be executed using the operation panel of the device Displayed consumables names or item numbers also vary depending on the device For information see the operator s guide of the scanner 86 Note Depend on some scanner models once the Scanner Information tab appears the operation panel is unable to be handled In this case close this dialog and turn the power ON OFF of the scanner After the scanner setup the operation panel is able to be handled When using a scanner the following message may be displayed Please replace FADO UNIT in paper feeder in case of the feeding capacity has gone down Regarding how to replace the pad please refer to the Instruction manual or contact 4 maintenance person Code DS42003 T It ig about time to replace the consumable supplies This message not display again J Warne again after scanning 100 pages Cancel Help If this message appears replace consumables following the instructions below lt If replacing consumables immediately gt 1 Check This message not display again 2 In cases where consumables are replaced after completing all documents being scanned click Ignore In cases where scanning is stopped for an immediate replacement click Cancel Following
26. application in startup of START is checked Scanner Control Center is started automatically whenever Windows is started About Scanner Control Center refer to Section 6 15 Select Yes I want to restart my computer now and then click Finish button Scanner Utility for Microsoft Windows Setup InstallShield Wizard Complete Setup has finished installing Scanner Utility for Microsoft Windows on your computer i Cancel 16 After the restart the scanner is detected Now the installation of scanner driver is completed 12 3 3 Uninstall The uninstall process removes the software and returns the hard disk to its pre installation state When you want to remove this scanner driver program from your PC uninstall by the following procedures 1 Turn on your PC and Log on to Windows When using Windows NT 4 0 log on as an administrator 2 Close all of the applications on Windows Select Control Panel from Start menu gt The Control Panel is displayed 4 Double click Add Remove Programs from the icon list of the Control Panel gt The properties of Add Remove Programs is displayed 5 Select Scanner Utility for Microsoft Windows from the Install Uninstall list 6 Click Add Remove button 7 When the confirmation dialog is displayed click OK button if you are ready to uninstall 8 When uninstallation is completed click on Finish button Image files that have been scanne
27. be affecting performance If the specified filename is correct use a utility such as chkdsk or scandisk to check the hard disk Ensure that no background programs that access the disk are operating If this error message continues to be displayed contact the place of purchase or your nearest maintenance and service center e There is a file formatting error Cause User response There is an error in the format of the specified file Either an incorrect file has been specified or the content of the specified file is incorrect After checking the users manual check that the content of the specified file 1s correct 102 8 1 3 Messages concerning to FUJITSU Scanner Control Center Failed to start up the application Check the setting of FUJITSU Scanner Control Center The setting of the path is blank Check the setting of FUJITSU Scanner Control Center Can not find the specified file Check if the specified path and file name is correct Can not find the specified work folder Check if the specified path is correct Cause The setting of the application may be inadequate User response Check setting items of General in Application Dialog and make sure settings are correct and there is no omission If you find any incorrect setting or omission correct it The same Plug in has been installed already Specified Plug in can not install Cause An attempt was made to install the same plug in that has been already in
28. downloaded At custom specification entering a value enables to set a pattern In case of color or grayscale the firmware version of scanner has to be D00 or latter This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 110 Image processing function Simplified Dynamic Threshold SDTC De Screen Edge emphasis 256 Color 8 Color 4bit Grayscale Reverse Individual setting Disabled Interface SCSI II USB1 1 Preview Enabled at ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Disabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Disabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled 111 Product Type Image sensor Operating method Light source Basi
29. ead eee 39 AIA io ec 2 1010 Deemer een tee meee a Me ene eee et or eae gee PT ene eee ee er 43 AO aa S GRE Eta eee a TC TCE RC SNCS FRPP SO ED POCO TR NAO PATTY CPI NTC Ta TOC 47 A TEMS OND ROS SI OM edge t tie tates cre teeta Oe ed sic eee apan antes doen eerie eset 51 ABOCO AVANCE ODOM Sorcerer rreren N 52 ae id GAY E EEIE P E EEE EA E AET ESET 53 A8 2 IMAGER a G 56 Teo PTO e E eee SO ee ee 58 4 8 4 When Color Grayscale is specified cccceeccceecceseeeeceseeceeeeeeeeeeseeeesseeeeaaees 61 4 9 Setting the Setting Manager Options cccccccecseeeeeeeeeesseeeesaeeeeseeeeeeeees 66 AAO BASIC ocan DIa OG E 69 4 11 DOWNOAd Palen PIG eisern 71 Using the Gamma Pattern Editor cccseeeceseeeneeceseeenseeeeeees 75 he Wi PAU UD Sects creascte cena esstre cosa eeete cen dette at attchaa histones sh tina usally edhe Ge alata bins 75 Oe vO AVION E E E E E A E chee vale vas sulle vase eat ET 76 Seo Pa Hr 9 ag earner caren cce eee AEN 76 BA Gamma PAS ry ENING ea aan ee nie ed et 77 How to Use the FUJITSU Scanner Control Center 78 Oe MN Sea a aa citten arsine sees liana ace aetna 78 6 2 How to Start the FUJITSU Scanner Control Center cccccceeeeeeeeeeeeees 78 OPOR AD MON Eaeneeene een ees eee reer nese E eae On eae ete ye at ey ene eee 79 oy ODIO A pment nree meee tect Meena meen Reon ee eee ee See et ee eee eee ene eee eee 81 6 41 COMMON TAD en a A 81 64
30. on the settings of the setting file information lt Configuration gt Setting Files Setting Files fio Configuration for Document A list of setting files is displayed When the desired file is selected the setting information saved in the file will be read and reflected during scanning 69 FTS File Information Basic Resolution 400 dpi Paper Size gt Leather 6 51 Tir Scanning Area Left 0 000 inch Top 0 000 imch width 8 500 inch Length 71 000 mch Scan Type ADF Front Side a 4 ill gt The contents of the selected file are displayed Scan button Car Executes scanning based on the contents of the setting file OK button b Terminates without performing the scan operation Adjust button Adjust i Switches from the basic scan dialog to the main dialog Help button Help i Displays online help Show this dialog next open checkbox MW Show this dialog next open If this checkbox is checked the Basic Scan Dialog will be opened at the next startup If this checkbox is not checked the main dialog will be opened at the next startup 70 4 11 Download Pattern File The download pattern file of this driver is a file that defines the patterns to be used by the scanner to execute various image processing This file is available in the following two versions Each version can be selected using the Download Selection
31. or gamma pattern cannot be found Check that the download file is in the specified directory Otherwise 99 use the file selection dialog to specify an available file Illegal format or data in download file Cause The format of the specified download file is illegal or the data is incorrect User response User response Use an editor to check file format and data ASPI manager not found Cause The ASPI manager may not have been installed or may have been deleted User response Reinstall the products including the ASPI manager attached to the SCSI board Then reboot the PC Scanner DLL file not found Cause An image scanner was selected but the DLL file of the selected image scanner has not been installed in the directory in which this driver is installed User response Perform the setup again A parameter error has occurred internally The calling procedure is invalid internally The area is specified incorrectly internally The calculation result exceeded the value that can be expressed internally User definition is not registered internally Illegal value is received during communication with scanner internally Cause This is a program error that occurs during command exchange between the driver and the image scanner User response Try again by rebooting the machine If the error persists contact the retail store where the product was purchased or the nearest service center A general faul
32. resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower fi 4120C Desktop Color CCD Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Black amp White Max 216mm x 711mm Grayscale Color Max 216mm x 610mm Fluorescent tube White 600 dpi 50 dpi to 600 dpi at steps of Idpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W Single sided 25 pages per minute 200 dpi A4 80g m Double sided 12 5 pages per minute 200 dpi A4 80 m 25 screens per minute Color Single sided 25 pages per minute 150 dpi A4 80g m Double sided 12 5 pages per minute 150 dpi A4 80 m 25 screens per minute Maximum 50 sheets A4 80g m High quality paper normal temperature and humidity Minimum 53mm x 74 mm Maximum 216mm x 355 6mm A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern Individual setting Disabled 255 steps at Color Grayscale scanning Internal types are not available Cannot be
33. system Automatic Document Feed ADF Simultaneous double sided scanning Fluorescent tube Green Horizontal scanning 200 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 400 dpi at steps of 1 dpi 8 bit 256 levels Disabled Dither matrix can be downloaded Error diffusion lt M3099G gt Single sided 55 pages per minute 200 dpi A4 55 kg Double sided 50 pages per minute 200 dpi A4 55 kg 100 screens per minute lt M3099GX gt Single sided 60 pages per minute 200 dpi A4 55 kg Double sided 50 pages per minute 200 dpi A4 55 kg 100 screens per minute lt M3099G gt Maximum 500 sheets ream weight 55 kg A4 lt M3099GX gt Maximum 1 000 sheets ream weight 55 kg A4 Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function 3 internal types can be downloaded Simplified Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not a
34. that the image quality of 8 Color is inferior to the case of 24 bit Color and 256 Color 8 bit Choose 24 bit Color for higher quality Only color scanner models support this option See Relevant Image Scanner Specification in the Appendix Black amp White Black 4 Fike Static Threshold z Specifies the processing method when Black amp White is specified in Image Mode Static Threshold Executes simple binary processing based on the Threshold setting SDTC DTC mode To enable the auto binary function of the image scanner specify this option If this option is selected the Threshold setting will be disabled In addition auto binary has two modes SDTC Mode and DTC Mode These modes can be set using the Advance dialog box DTC Mode however is limited to the image processing options Therefore only scanner models that have image processing options support DTC Mode See Relevant Image Scanner Specification in the Appendix SDTC mode Floating Slice This option enables scanning and fine binary processing for documents whose backgrounds are other than white such as newspapers Some scanner models do not support this option See Image Scanner Specification in Appendix 22 Advanced DTC Scan in fine binary mode regardless of the document Normal binary mode can t scan very well faintly toned documents documents with colored background or documents with color charts Choose this to scan t
35. the leading edge and the left side appeared when using the flat bed These functions may not be displayed for some scanner models Vertical magnification Adjustment The Vertical magnification correction value of sub scanning direction can be changed For ADF scanning the image is expanded or shrunk in the paper feeding direction based on the setting value at shipment For FB scanning the image is expanded or shrunk in the direction to which the scan head moves based on the setting value at shipment This function is used to adjust the image whose ratio of length and width seems different from the original document The setting value varies depending upon the device used 90 7 Using the Firmware Updater This application software is used to update the firmware installed in the scanner device However this application software is automatically executed when the driver installation is completed If the software 1s executed at the installation it is not necessary to execute again This application software shall be used only for the following devices Do not use for other devices Applicable Devices fi 4750 M4097D f1 4750C Check items before use Before using this application software check the following items Check that the scanner is connected properly If more than one scanner are connected the update cannot be done correctly Connect one scanner only that has the firmware to be updated If the driver has
36. the operator s guide of the device replace the consumables 4 Select Device setting tab click Clear button to reset the consumables counter lt If replacing later immediate replacement is impossible gt 1 If itis not necessary to display this message again check This message not display again If it is necessary to display this message again after scanning xxx pages check Warns again after scanning xxx pages 2 If the scanning is continued click Ignore and close the message If the scanning is stopped click Cancel and close the message 3 Replace consumables as soon as possible or when this message appears next time 4 After the replacement click Clear of Device setting tab If This message not display again is checked this message will not appear before the consumable counter 1s reset About Power saving Specify when the lamp turns off This is the elapsed time after a scan is complete Power saving ae 15 minutes Depending on the scanner model the range which can be set is different 87 About Multifeed Button Use this to specify multifeed detection area By default Multifeed Detection monitors paper overlap over the central column width 35mm of the document to be scanned This will lead to mis detection when the document is partially pasted with photographs or clippings When scanning these kinds of documents you can specify an exact detection area to prevent mis detec
37. this option is selected black and white are reversed by reversing the black and white pixels If this option is not selected the black and white values of the reproduced image correspond to the original image Some applications do not permit normal operation If this occurs contact the manufacturer of the application 55 4 8 2 Image Filter Advance Front Image Mode Black amp white Static Threshold Grays Image Filter Edge Processing None C Emphasis High 2 i Emphasis Mid j smoothing C Emphasis Low Background Removal Mirror Image m Default Cancel Help Figure Advance dialog Image Filter Edge Processing None C Emphasis High C Edge Extract C Emphasis Mid e6 smoothing C Emphasis Low Backeround Removal This option specifies the sharpness of a scanned image Select None Edge Extract or Smoothing Background Removal None Edge processing is not performed Edge Extract This option outputs an image with the edge extracted If this option is selected the boundary between the black part and white part in a closed area is traced and the edge extracted DTC Variance and Edge Extract are mutually exclusive Smoothing Background Removal This option specifies whether to smooth the curves in an image by removing zigzag lines Smoothing or Emphasis can be selected In addition Edge Extract and Emphasis are mutually exclusive 56 Emphasis This op
38. 41 40 39 38 37 36 99 B45 394 325 31530 29 28 2h20 29 24 23522 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 74 5 Using the Gamma Pattern Editor 5 1 Start up Click on Start and select Gamma Pattern Editor from Scanner Utility for Microsoft Windows under Programs The following menu is displayed Pid Gamma Pattern Editor File Help 255 FreeEdit m Reverse Figure Gamma Pattern Editor Tool start up menu 75 5 2 File menu Gamma Pattern Editor Help Load Jave ave S Load This menu is used to read the Gamma Download file and display the graph and gradations The name of the open file is displayed above the graph area Save The gamma pattern currently being edited is saved in the file whose name is displayed above the graph area If no filename is displayed the pattern is named and saved in that file Save As The gamma pattern currently being edited is named and saved in that file The saved filename is then displayed above the graph area Close Select this to exit the editing program 5 3 Help menu Gamma Pattern Editor About Information related to this editor and its version number is displayed 76 5 4 Gamma Pattern Editing Graph Area The graph area is a 256 dot X 256 dot white square area bordered by black lines where the relationship between the input values o
39. 7mm x 864mm Grayscale Color Maximum 297mm x 864mm Fluorescent tube White 600 dpi 50 600 dpi at steps of 1 dpi 10 bit 1024 levels Enabled Dither matrix can be downloaded Error diffusion Enabled Black amp White Single sided 35 pages per minute 200 dpi A4 80 kg Double sided 35 pages per minute 200 dpi A4 80 kg 70 screens per minute Color Single sided 45 pages per minute 150 dpi A4 80 kg Double sided 45 pages per minute 150 dpi A4 80kg 90 screens per minute Maximum 100 sheets ream weight 80 kg A4 High quality paper Normal temperature and humidity Minimum 53 mm x 74 mm Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Business Card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern 255 steps at Color Grayscale scanning Custom only This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 156 Image processing function Simplified Dynamic Threshold SDTC Advanced DTC Edge emphasis Edge extraction De screen 256 color 8
40. Automatic separation Scans data distinguishing line drawing from photograph image If this option is selected the line drawing part is scanned using Black amp White and the photograph part is scanned using Halftone This information is most suitable for documents containing both photographs and line drawings or text Some scanner models do not support this option See Relevant Image Scanner Specification in the Appendix 21 SEE Selective Edge Emphasis Scans data using the halftone processing and emphasizes line drawings and text This option is most suitable for emphasizing only text of documents containing both photographs and text Some scanner models do not support this option See Relevant Image Scanner Specification in the Appendix 24bit Color Scans data using 24 bits color This mode is suitable for scanning color photograph and employs far more memory that Gray scale mode Only color scanner models support this option See Relevant Image Scanner Specification in the Appendix 256 Color Scans data using 256 colors Data size 1s smaller than 24 bit Color selected Please note that the image quality of 256 Color 8 bit is inferior to the case of 24 bit Color Choose 24 bit Color for higher quality Only color scanner models support this option See Relevant Image Scanner Specification in the Appendix 8 Color Scans data using 8 colors Data size 1s smaller than 256 Color selected Please note
41. Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Enabled with JPEG option Filter Page Edge Filler Digital Endorser Drop out color Enabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the endorser print position printing will begin 42 mm from the edge of the page 137 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower M3097G Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feed ADF Fluorescent tube Green 400 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 1 600 dpi at steps of 1 8 bit 256 levels Enabled 8 bits Some release version of scanner do not support gray scale output format Dither matrix can be downloaded Error diffusion 1 3 sec or less A4 200 dpi 3 7 sec or less A3 400 dpi 36 page
42. Cache mprinter Endorser Genetic Filter Enable Imprinter E ndorser Enable Printing o mm Top to Bottom Font Horizontal i Bald t Offset Direction Counter Initial alue o Step Inc D ec 0 imprinter String Endorser String Sample Counter f ncrement f Decrement Figure Option dialog Imprinter Enable Imprinter Endorser Enable Imprinter Endorser Enable al Cancel Help Specifies enabling or disabling the imprinter function of the device When the option is selected the scanned documents are imprinted according to the instructions below This applies only to the imprinter option Therefore the function is supported only with the scanner which supports imprinter option s See Relevant Image Scanner Specification described in the Appendix Disable Imprinting is not performed Enable Prints on documents using imprinter by the settings below In this case it prints on the back side of documents after scanning Therefore the printing is not included in a scanning result Depending on scanners two imprinters can be installed and one of them can be selected to use In this case Enable is displayed as follows Pre Imprinter Printing before scanning and on the front side of documents Prints on documents using the imprinter installed in front part of the scanner In this case it prints on the front side of documents before scannin
43. Choose Destination Location Select folder where Setup will install files Setup will install Scanner Utility for Microsoft Windows in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder Destination Folder C Program Files fitwain InstallShield Cancel Usually it is not necessary to change Destination Folder 11 Confirm Components you install and then click Next gt button Scanner Utility for Microsoft Windows Setup xi Select Components Choose the components Setup will install Select the components you want to install clear the components you do not want to install Description This component contains the TWAIN Data Source the driver which is unique for this device and compression and a file for the file transfer JOIN Driver 15601 K TWAIN Manager 294 K Support Tools 5441 K Change Space Required on C 3904 K Space Available on C 2364420 K InstallShield Cancel Usually it is not necessary to change the selection of Components 10 12 Confirm Program Folder and then click Next gt button Scanner Utility for Microsoft Windows Setup xi Select Program Folder Please select a program folder Setup will add program icons to the Program Folder listed below You may type a new folder name or select one from the existing folders list Click Next
44. DTC Density Scan fo OCA C forlmage Threshold Curve pa r Equal to White Filtering Noise Removal W Ball point pen mode None bi OCRA Smoothing Default Cancel Help Figure Advance dialog DTC Mode Scan mode ocan mode of for OCR for Image This option selects one of the following two scan modes for OCR This mode is for text recognition applications where irregularity in the image is undesirable for Image This mode is for image scanning applications that scan images without prior smoothing The specification changes the specifiable items and members for Threshold Curve and Gamma Curve The selection screens for for OCR and for Image are not displayed if IPC 3 3D and IPC AD are installed 58 Threshold Curve Threshold Curve r m f Normal Light Dark C Light This option specifies the relationship between the threshold value and the maximum density The specification method depends on the Scan mode setting In for OCR mode use the scroll bar to set the inclination and density level between 0 and 5 Click the arrow of the scroll bar or drag the scroll marker to the desired setting position The current setting is displayed in the center figure on the left In for Image mode select Normal or Light figure on the right If IPC 3 3D and IPC 4D have been installed there is no difference between for OCR and for Image The scroll bar i
45. Dialog that opens when Download is selected The file is a text file that conforms to the following rules Use an appropriate text editing program for example Note Pad in the operating system to edit the file Dithered download pattern file Any user defined dithered pattern can be used to scan an image by downloading the pattern from the dithered download file to the scanner The defined pattern becomes effective when Download Pattern is selected for Halftone Some models do not support this file See Relevant Image Scanner Specification in Appendix Although the standard extension of the file name is DTH there may be exceptions Coding configuration n size in the X direction m size in the Y direction pattern value for the X1 Y1 coordinates pattern value for the X1 Y2 coordinates pattern value for the X1 Y2 coordinates pattern value for the Xn Ym 2 coordinates pattern value for the Xn Ym 1 coordinates pattern value for the Xn Ym coordinates Meaning of each element n size in the X direction indicates the size of the matrix in the X direction Specify 8 for the scanner supported by this driver m size in the Y direction indicates the size of the matrix in the Y direction Specify 8 for the scanner supported by this driver Pattern value for the Xx Yy coordinates contains a values in the range of O bright to 255 dark that specifies the brightness of the X coord
46. F and 0 2 to 3 0 in increments of 0 2 1 Ratio of black dots included in the scanning area for white pages In case of Color or Grayscale Sensitivity 1 Low High Use the slider bar to set the skip condition in five stages from 1 to 5 To make the blank pages easy to skip increase the value of the setting 36 lt If blank page skip does not operate properly gt Ifa blank page is scanned increase the value set If scanning is skipped up to the required document decrease the value set When Black Background is selected in Automatic Size and Skew detection the Blank page skip may not operate properly When Scanned image has many background noises the Blank page skip may not operate properly 37 4 7 3 Generic Option Rotation Job Cache ImprinterEndorer Generic Filter Compression Unit Scaling Cancel C Inches _ Cancel f Millinmeters Help Pixels Figure Option dialog Generic Unit Scaling C Inches fMillimeters Pixels This option selects the unit for the scanning area and preview window One inch is calculated as 25 4 millimeters When inches are converted to millimeters values are rounded off Note The TWAIN specifications require that the data width be arranged in units of 32 bits As a result a difference of up to 31 dots can be included depending on the value set 38 4 7 4 Imprinter Endorser Option Rotation JobY
47. Maximum 50 sheets A4 80g m High quality paper normal temperature and humidity Minimum 53mm x 74 mm Maximum 216mm x 355 6mm lt ADF gt Maximum 216 mm x 297 mm lt Flat Bed gt A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Individual setting Disabled 255 steps at Color Grayscale scanning This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 118 Gamma pattern Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern Image processing function Simplified Dynamic Threshold SDTC De Screen Edge emphasis 256 Color 8 Color 4bit Grayscale Reverse Individual setting Disabled Interface SCSI I USB1 1 2 0 Preview Enabled at Flat bed scanning ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Us
48. P3PC 1382 07ENC2 FUJITSU TWAIN 32 Scanner Driver Scanner Utility for Microsoft Windows Version 8 18 User s Guide For Microsoft Windows 95 and Windows NT For Windows 98 Windows Me Windows 2000 Windows XP and Windows Server 2003 refer to Version 9 18 User s Guide oe FUJITSU Introduction Thank you for purchasing the Scanner Utility for Microsoft Windows V8 18 This software contains a TWAIN compliant image scanner driver simply called driver in this guide and utilities This guide provides a description summary of the driver as well as a description of the installation method and procedures for appropriate use Please read this guide before starting to use the software In addition read the README TXT file on the CD ROM for the latest information not included in this manual In this guide product names are abbreviated as follows e Microsoft Windows 95 operating system Windows 95 e Microsoft Windows NT Workstation operating system Version 4 0 and Microsoft Windows NT Server operating system Version 4 0 Windows NT 4 0 e Microsoft Windows 98 operating system Windows 98 e Microsoft Windows 2000 Professional operating system Windows 2000 e Microsoft Windows Millennium Edition operating system Windows Me e Microsoft Windows XP Home operating system Windows XP e Microsoft Windows Server 2003 operating system
49. Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Enabled with JPEG option Filter Page Edge Filler Digital Endorser Drop out color Enabled sRGB output Enabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the endorser print position printing will begin 7 mm from the edge of the page 125 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Gray scale 8 bits output Halftone Patterns Color 24bits output ADF scanning speed Hopper capacity Document size Supported regular paper Scanning area specification White level follower fi 4530C Desktop Color CCD Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Resolution free Black amp White Maximum 297mm x 864mm Grayscale Color Maximum 297mm x 864mm Fluorescent tube White 600 dpi 50 600 dpi at steps of 1 dpi 10 bit 1024 levels Enabled Dither matrix can be downloaded Error diffusion Enabled Black amp White Single sided 35 pages per minute 200 dpi A4 80 kg Double sided 17 5 pages per minute 200 dpi A4 80 kg 35 screens per minute Color Single sided 45 pages per minute 150 dpi A4 80 kg Double sided 22 5 pages per minu
50. XDANAON NOTOS eiie e e e ic eaes sa nnuenaan ie naeaee 2 t4 EXDIAMALION O TONS siaii E AE 3 2 TWAIN ccin a N 4 2l TWAIN ceira an e 4 2 2 PNWAIN PAD INGE ON n OPEN aeRO 5 Fi MVS TAM ALION geet iocnceids eeturnencalocd a 6 SERODIA UON Ree en mee ee ne enn ee eee eee ee 6 B22 tanino INSTA AON saiacascta sicais dicta dtedstia fica logan tie cts tos sheen oe eaten 7 9 95 ONIN alleen seusauaiersieeaiaue winesaie vine velauaatadue Late aieimiainidemteeoeeed ett 13 4 USING TNE DIVER sipsirin a aa 14 4 1 Selecting the Driver cccccccccceececsesececeeeeeceeeeeseeeeeseeesseeeesseeeesseeesseeeesaaes 14 A 2 OCEN COMmlOQUlallOMsesecvancvee cnet aie a 14 4 2 1 Linkage to Image Processing Software Option ccccccseseeceeeeeeseeeeeeeeseeseees 15 4 3 Displaying Driver Information cccccccceccceeeceeeceeeeeeceuecaeeceeeseeeseeseeesaees 16 4 4 Setting Information On Image SCANNING ccccseeccseeeeseeeceeeesaeeesaeeesaeeeeas 17 4 5 SDeCIVING Diver Opera Uon saroien 25 AO SeUIhG Scanning Alea e O E E S 27 4T SeUING OPON S eens a anne aoe aes a iat alNastabiocl 28 dre ROO a eearestansag to eclaaa ama heast aabscuma aren satnaee ee 29 BS ZOD GACIIC iicies ai roes ache a ee taan ce uaeesaaeaie anendnesaiemetarastoeaetaaeaeaoeae 33 Aho OENE Cisaictansictecertoutmadsecnauanisasun wines cleteensunatadnarmuaciteusidunaialataddauimadsacmuatmawin aubaaaiaes 38 A TA IMD HINWEN Endorser reren a ian lea tonne tabla
51. able you can scan faster than when selecting Disable because of Pre Pick process When selecting Enable if you cancel during the ADF scanning a document remains in the scanner in the Pre Pick status 35 Check Over skew Check Over skew The skew of the transmitted document is supervised during the ADF scanning When an over skew is detected the scanner is stopped and an error message is displayed The image data of the skewed document is deleted This functions only when Multifeed Detection is enabled Blank page skip This option skips blank pages blank pages or completely black pages during ADF continuous scanning i Blank Page Skip Marking this check box this function is enabled This function can be used if Ram cache or Use Both Memory is selected If an item other than Ram cache or Use Both Memory has been selected in the Cache Mode and this check box is marked it will change to Ram cache In case of Black amp White or Halftone In case of binary a white Dots A atio Black Dots A atio a For White pages use the Black Dots Ratio slider bar to set the skip condition For black pages use the White Dots Ratio scroll bar to set the skip condition The value displayed to the right of the scroll bar displays the garbage ratio 1 If a scanned document is below this value it is recognized as a blank page The setting range is OF
52. abled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Disabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled 117 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower fi 4220C2 Desktop Color CCD Reduced optical system Document fixed Flat bed FB Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Max 216mm x 864mm Fluorescent tube White 600dpi 50 dpi to 600 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W 2 2 sec or less 200 dpi A4 Color 2 1 sec or less 150 dpi A4 B W Single sided 25 pages per minute 200 dpi A4 80g m Double sided 25 pages per minute 200 dpi A4 80 m 50 screens per minute Color Single sided 25 pages per minute 150 dpi A4 80g m Double sided 25 pages per minute 150 dpi A4 80 m 50 screens per minute
53. about the programming errors that occur during message and data processing User response Contact the retail store where the product was purchased or the nearest service center 101 8 1 2 Error messages relating to gamma correction pattern editing e Enter a positive decimal value Cause User response A value other than a number has been entered as the gamma correction value Alternatively 0 or a negative value has been entered Reenter a valid value e The file could not be created Cause User response The file for saving could not be created There is insufficient space to save the file or the disk to which the file was to be saved is corrupted Alternatively writing to the directory in which the file was to be saved may not be allowed or other programs relating to disk access may be affecting performance Increase the amount of available space on the disk Use a utility such as chkdsk or scandisk to check the hard disk Ensure that any background programs that access the disk are not operating If this error message continues to be displayed contact the place of purchase or your nearest maintenance and service center e The file cannot be opened Cause User response The file could not be opened The specified file name may be incorrect or the disk from which it is being read may be corrupted Alternatively the specified file may be a write only file or other programs relating to disk access may
54. acters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI Preview Enabled at Flat bed scanning only Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Enabled If0 mm is specified as the endorser print position printing will begin 42 mm from the edge of the page 133 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Isolation specification Background compensation fi 4750L Desktop Reduced optical system Document fixed Fl
55. age Processing Software Option Disabled 121 Product M3093DG f1 4320 VSP220 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed Double sided ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feeder ADF Simultaneous double sided scanning Xe discharge tube Green 400 dpi Standard 600 400 300 240 200 150 100 dpi With image processing option 50 dpi to 800 dpi at steps of 1 dpi 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 1 6 sec or less A4 200 dpi Single sided 27 pages per minute 200 dpi A4 55 kg 22 5 pages per minute 200 dpi A4 55 kg 45 screens per minute Maximum 50 sheets ream weight 55kg A4 High quality paper normal temperature and humidity Maximum 216 mm x 356 mm A4 A5 A5 landscape A6 A6 landscape B5 B6 B6 landscape Letter Legal US Executive Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting Interface Preview Flip Side Rotation 3 internal types can be downloaded Simplif
56. ame of the file used to save the settings 67 Delete button Delete Deletes unnecessary setting files Select the setting file to be deleted and then press the Delete button A confirmation dialog will be displayed Press the OK button to delete the setting file To cancel press the Cancel button Help button Help Displays online help Initialization button Initialization All of scan settings are returned to the initial value 68 4 10 Basic Scan Dialog The basic scan dialog contains only the minimum functions required for scanning The detailed setting functions of the main dialog have been omitted Scanning can be easily performed by selecting a registered setting file The basic scan dialog is also useful for avoiding incorrect operations when standard work is performed By checking the Show this dialog next open checkbox of the Configuration dialog the Basic Scan dialog will be opened instead of the main dialog box at the next activation TWAIN Driver Basic Scan dialog Setting Files Man ea Basic Resolution 200 dpi Paper Size Letter 6 57 Tin Scanning Area Left 0 000 inch Top 0 000 inch width 8 500 inch Length 11 000 inch Scan Type ADF Front Side W Show this dialog nest open lt Scan Procedure gt 1 Select the file to be used from the list of setting files 2 Click the Scan button gt Scanning is performed based
57. andscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern Image processing function 255 steps at Color Grayscale scanning 3 internal types can be downloaded Dynamic Threshold SDTC DTC Edge emphasis Edge extraction Automatic separation Mirror image Black amp White only Reverse 256 Color 8 Color Abit Grayscale This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 146 Individual setting Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Image processing function Imprinter Endorser With endorser option Reverse side minimum left margin printing position of 20 mm Maximum number of characters to be printed 30 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display There are partly limitations by the revision of the scanner device Direction Printing Top to Bottom Interface Ultra Wide SCSI Preview Disabled Flip Side Rotation Enabled Rotation Enabled Au
58. anner Memo 256 MB Serial No 0 HW Scanning Area HA idea Output Physical Function Imaging On Board IPC HA Compression Function odara 85 6 4 4 Device Setting tab Information related to the operation and maintenance of the scanner driver can be displayed and set up For some scanner models this tab may not be displayed or some items cannot be set up grayed out Changing the setup activates the Apply button The changed setup is reflected on the device only if the Apply button or OK button is clicked The contents of this tab folder are not displayed if the scanner driver is either currently in use or not connected to the computer If they are not displayed stop the application being used by the scanner driver or check the connection Then select this tab folder again to display the data FUJITSU Scanner Control Center Common Device lnfo Device Setting Fage Counter Total Page Count 4DF 490 pages Pad j pages Clear Pick Roller O pages Clear Jes har Power saving a 15 minutes Multi feed Power Control Olfset About how to replace consumables When Scanner Information tab is selected the following dialog appears Page Counter Total Page Count 4DF Total Page Count FB Brake Roller Pick Roller Unit page pages pages Clear pages Clear Mu An equivalent count of the pages scan after consumables are replaced and remaining the imprinter ink are
59. at bed Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning 297mm x 1387mm Black amp White only Xe discharge tube Green 400 dpi Standard 50 dpi to 800 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 0 9 sec or less 200 dpi A4 Single sided 55 pages per minute 200 dpi A4 55 kg Double sided 50 pages per minute 200 dpi A4 55kg 100 screens per minute Maximum 250 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction SEE Selectable Edge Enhancement Reverse With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation Enabled Brightness Threshold Contrast Gamma pattern Image processing function This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices F
60. atch Detection Enabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled SRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled 139 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Cutout specification Background compensation M3097DG Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feed ADF Simultaneous double sided scanning Xe discharge tube Green 400 dpi Standard 600 400 300 240 200 150 100 dpi With image processing option 50 dpi to 800 dpi at steps of 1 dpi 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 1 3 seconds or less A4 200 dpi Single sided 36 pages per minute 200 dpi A4 55 kg Double sided 30 pages per minute 200 dpi A4 55 kg 60 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 m
61. ation Image scanner name Image Scanner fi 45400d 1 IPCa4D de MB Browse The model name option port name and capacity of internal scanner memory in units of megabytes of the connected image scanner are displayed If no image scanner is connected this field is blank The type of IPC option board is displayed if an image processing option board is installed in the scanner IPC 3 3D may not be detected normally as it is affected by the version number of the machine type and device In this case IPC2 is displayed Preview window Ruler The preview window is used to display the temporary image of read data and for setting the Scanning Area For settings see Scanning Area later in this manual Also see the description of the Preview button later in this manual Ruler The large divisions are labeled as Unit The scale also varies with the selected scanner Message line The message line is the bottom line of the dialog in which a brief explanation of an input item or a setting item 1s displayed when the mouse cursor is moved over the item Data size The approximate amount of data per image when data is scanned in the present option Note This value is the amount of uncompressed data The size of the stored file will differ from this value and is usually smaller if image compression is chosen and the image is compressed 16 4 4 Setting Information on Image Scanning Current side Duplex C Individual
62. ation when the start button in this application is pressed is disabled 83 6 4 2 Diagnosis tab Diagnoses the selected scanner s statement and reports the result FUJITSU Scanner Control Center Common Diagnosis Device Info Device Setting To diagnose the scanner Diagnose Report not diagnosis pet Diagnose button Starts diagnosing when clicking this button Report The result of diagnosis is displayed Depending on the scanner model this tab may not be displayed 84 6 4 3 Device info tab A list of the functions compatible with the selected scanner driver is displayed The items displayed depend on the selected model of scanner Only hardware functions are displayed The functions realized by software are not displayed in this tab folder Therefore the displayed content may not match the content specified during reading The contents of this tab folder are not displayed if the scanner driver is either currently in use or not connected to the computer If they are not displayed stop the application being used by the scanner driver or check the connection Then select this tab folder again to display the contents FUJITSU Scanner Control Center Common Diagnosis Device Info Device Setting Device Infomation Function Support Standard Information Vendor Identification FUJITSU Product Identification f 5 500d Firmware Yer SOC 0356 Firmware Wer MOC 0410 Initial Use 03 10 07 Sc
63. been activated close the application software that is using the driver How to use Select as follows Start Program Scanner Utility for Microsoft Windows then Firmware Updater The program is executed and the following dialog box appears Firmware Updater for M4097D fi 4750C with imprinter option x Do you want to update the firmware The process will take a Few minutes but can not quite in the middle TF you want to implement the process later press No button 2 M4097 Dy Fi 4 7500 is detected which required to update the Firmware ee Firmware Updater Please do not power off while updating firmware es Do not turn off the power of the scanner during the firmware update Otherwise the device may break down 91 When the following dialog box appears press the OK button Firmware Updater for M4097D fi 4750C with imprinter option d i Firmware update completed successfully The firmware update has been completed successfully Reactivate Windows 92 8 Troubleshooting 8 1 Error Messages 8 1 1 Messages from the TWAIN Driver e The input value is outside the range Cause A value exceeding the range allowed for an input item was input User response Input a value inside the allowed range Refer to the input item or the image scanner specification for the range e The input value is not acceptable Cause A value exceeding the range allowed for an input item was input
64. c resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower fi 4120C2 Desktop Color CCD Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Max 216mm x 864mm Fluorescent tube White 600 dpi 50 dpi to 600 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W Single sided 25 pages per minute 200 dpi A4 80g m Double sided 25 pages per minute 200 dpi A4 80 m 50 screens per minute Color Single sided 25 pages per minute 150 dpi A4 80g m Double sided 25 pages per minute 150 dpi A4 80 m 50 screens per minute Maximum 50 sheets A4 80g m High quality paper normal temperature and humidity Minimum 53mm x 74 mm Maximum 216mm x 355 6mm A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern Image processing function Individual setting Disabled 255 steps at Color Grayscale scanning Internal types are not available Cannot be downloaded At custom specifica
65. can black letters with red outlines and you want only the black part of the letters to be scanned When White is selected no color dropout occurs but it may be some loss of light yellow color When None is selected no color dropout occurs but scanning may slow down depending on the compatibility of your PC s operating environment Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix 65 4 9 Setting the Setting Manager Options These options are used to manage the setting files and switch the basic scan dialog display setting Files 00 Curent Setting Contig Click the Config button of the main dialog to open the Configuration dialog box shown below Configuration setting File Information File Mame FR Sr Description gt Current Setting Time Stamp 0342272006 04 33 10 PM Basic Resolution 400 dpi Paper Size Letter 6 5x1 Tir Scanning Area Left gt O 000 inch Top 0 000 inch PMwidth 6 500 inch Length 11 000 inch Initialization Show this dialog next open Figure Configuration dialog box Setting Files Setting Files o Current Setting The setting information of the scan conditions can be saved in a Setting file Scan condition settings that have been set in advance in this dialog can be selected from the list of setting files This enables selection of all settings at the same time without having
66. cify a resolution value that is below the indicated xxx dpi Cannot specify Gray Scale with Custom resolution Cannot specify Color with Custom resolution Cause Custom resolution was designated when Gray Scale or Color was designated User response Designate a resolution value other than Custom Cannot specify Gray Scale with duplex document Cause Duplex scanning is specified with Gray Scale specified User response At duplex scanning select Black white binary or Half tone for the Image type 94 e Cannot specify Individual Setting with Gray Scale e Cannot specify Long Page Scan with Gray Scale Cause User response Gray Scale and Individual Setting are specified at the same time Gray Scale and Long Page Scanning are specified at the same time Uncheck Individual Setting when specifying Gray Scale At Long Page scanning select Black white binary or Half tone for the Image type e Your application using may not support page end detection or undefined image size function Cause User response Cause User response Cause User response Cause User response Cause User response Cause User response Scanned image may not be displayed correctly when scanning by using the page end detection or undefined image size function with the application which is not supporting these functions When scanned image is not displayed correctly please select disable f
67. ck this check box when giving priority to scanning speed over image quality Scanner Operation Panel Enable Scanner Panel m Enable Scanner Panel This is to specify whether the operator panel is enabled or not If this is checked button operation on the operator panel becomes effective Note that the operator panel is enabled only during the driver is activating Enable Scanner Dial W Scanner Dial Enable Specifies whether the value indicated by the density dial on the scanner is reflected on scanning or not This setting is valid when both Enable Scanner Panel and this checkbox are checked With this density dial the density can be set by five levels 45 If moving the density dial to the UP direction the density changes Normal gt gt Darker scanning gt gt Dark scanning If moving the density dial to the Down direction the density changes Normal gt gt Lighter scanning gt gt Light scanning If the dial is in the center the scanning density is Normal Enable Duplex button Jf Enable Duplex button This specifies whether the Duplex button to switch simplex and duplex on the scanner operator panel is enabled And it distinguishes whether to scan from the ADF or from the Flat Bed FB and changes automatically If this box is checked when a document is on the ADF scanning 1s started from the ADF And when no document is on the ADF scanning is started from the FB Scanning change
68. color Abit Grayscale Reverse Individual setting Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Imprinter Endorser With Imprinter option Reverse side minimum left margin printing position of 5mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Font orientation Vertical Normal Horizontal Normal Narrow Bold font Enabled Interface Ultra SCSI USB 2 0 Preview Enabled at ADF scanning Flip Side Rotaiton Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Batch Detection Disabled Multifeed detection Enabled Check overlapping length Area selection Pre Pick Enabled Check Over skew Disabled Blank page skip Enabled when Ram cache is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled Device set Consumables replace Pad Pick Roller Remaining Ink counter clear Offset Setting Vertical magnification Adjustment Lamp timer Area Selection for Multifeed Detection Power ON OFF Control setting If
69. cribed in the Appendix since the programmable digits depend on the device The initial counter and the methods of increasing and decreasing values can be specified as explained above under the heading Counter This specification is only permitted at the end of an Imprinter String Endorser a mp le 2001 403 08 22 42 00000 Displays printed examples of the Imprinter String Endorser designated above Note The printed counter date and time do not always look like the sample because the scanning option takes precedence 42 4 7 5 Start Up Set up the Power Mode Low Speed Feeding and Scanner Operation Panel In some scanner models displayed dialog box or setup item may be different or even Startup dialog box may not be displayed Option Rotation Job Cache Generic Startup Filter r Power Mode Scanner Operation Panel Quick Start W Enable Scanner Panel Low Power MV Enable Scanner Dial Enable Low lw Speed Feeding m i F Frefer Scanning l lt M Enable Duplex Button Speed l W Enable SendTo Button MV Enable Scan Button In case of model fi 4110CU fi 41 10C M3091DC fi 4210CUM3092DC Option Rotation Job Cache Generic Startup Filter Compression Scanner Operation Panel Prefer Scannin W Enable Scanner Panel lw Coed g Cancel Help W Enable SendTo Button W Enable Scan Button In case of model fi 4120C fi 4120C2 f1 4220C f1 4220C2 f1 4530C
70. d W Bold The imprinter string is outputted with bold font Available settings vary depending on your scanner Refer to Relevant Image Scanner Specification in the Appendix 40 Initial Value Counter Initial Value 0 Designates the initial count when the Imprinter String is set including a counter value See the Relevant Image Scanner Specification described in the Appendix since the programmable values range depends on the device Counter Step Counter Step linc Dec 0 Designates the counter increment of the set counter values In other words this value is added to or subtracted from the counter each time one original is scanned An increment of 0 1 or 2 may be specified Usually 1 is designated for a single sided original and 2 for a double sided original Counter Counter Counter i hcrement O Decrement Designates whether to increase or decrease the specified step value Imprinter String Endorser String yyy AM MXD KHAN 05ud Specifies the imprinter string The following characters can be outputted by the Imprinter Alphabet Letters A Z a Z Numeric Characters 0 1 9 Symbols P 4 3 lt gt 7 4 C Other Space The space is ignored when it is entered at the head of String The following definitions can be used They may also be selected from the menu which is displayed by clicking on La YYYY The year is printed in four digits using the We
71. d JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled sRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the printing position printing will begin 5 mm from the edge of the page 113 Product M3092DC fi 4210C Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower Desktop Reduced optical system Document fixed Flat bed FB Automatic Document Feed ADF Simultaneous double sided scanning Fluorescent tube White 600dpi FB 300 dpi ADF 50 dpi to 600 dpi at steps of Idp1 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W Single sided 15 pages per minute 200 dpi A4 55 kg Double sided 7 5 pages per minute 200 dpi A4 55kg 15 screens per minute Color Single sided 5 pages per minute 150 dpi A4 55 kg Double sided 2 5 pages per minute 150 dpi A4 55kg 5 screens per minute Maximum 50 sheets A4 ream weight 55 kg High quality paper normal temperature and humidity Minimum 52mm x 74 mm Maxi
72. d at ADF scanning Flip Side Rotaiton Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Batch Detection Disabled Multifeed detection Enabled Check overlapping length Pre Pick Enabled Check Over skew Disabled Blank page skip Enabled when Ram cache is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the printing position printing will begin 5 mm from the edge of the page The firmware version of scanner has to be KOO or latter 127 Product M3096GX fi 4620S VSP310 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feed ADF Xe discharge tube Green 400 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 800 dpi at step
73. d and saved will not be deleted If other TWAIN compliant applications and drivers have been installed and you are asked whether or not to delete files shared with them such as the TWAIN Manager select NO to avoid deleting them 13 4 Using the Driver 4 1 Selecting the Driver To use this driver from the TWAIN application select FUJITSU lt Product ID gt from the TWAIN data source driver selection screen For general application the data source selection screen is displayed by selecting the Select Scanner or Acquire menu Refer to the instruction manual for the application used for details 4 2 Screen Configuration Scanning Area settings Image scanner name Preview window Setting file name ti TWAIN Driver 32 Ed a 0 100 iM Image Scanner fi 4530C0d SIPC OME Browse Setting Files OO Current Setting Contig Scan Type ADF Front Side al Paper Size zj dpi Predefine Letter 8 51 1in ue Enable Software IPE E E E E E E E E E E E E E J F HI H IE L E E E E a E E E Bis l I f Front id H 300 Image Mode Brightness 128 AE i hal Black amp White O Threshold Black white Static Threshold Scanning 4real mm Left 0 Width 21 E Contrast Help About TWAIN driver Press F1 key to show help SS Data Size about 1 1MB _ Data size Message line B
74. d the resulting distortion must be corrected One of the following can be selected as a correction pattern Normal Soft Sharp Download Pattern or Custom Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Download Gamma Pattern Selection File Mame E Documents and SettingssturisesMy Documen Cancel Add Delete When Download Pattern is selected the above dialog box opens 62 Select the gamma pattern download file to be used from the list of file names Then press the OK button Correction will then be executed using the selected gamma pattern If the gamma pattern download file has not been registered in the list of file names use the Add button to register the file See Download Pattern File for information about how to specify the file When Custom is selected you can specify the values on the Shadow Highlight Contrast Brightness and Gamma tab shadow Highlight Contrast Brightness Gamma Shadow 0 Highlight 255 _T Color select Color only Color select f Common setting f Color f Red f Green f Blue It is possible to select independent value on each color SRGB Output Color Grayscale AGE Output Scans images by using the color control information of Color Space Profile icm the standard color profile of Windows Refer to Windows Help to learn more abou
75. dicates the size and the gray scale of the input value In this driver this value is fixed at 256 gray scale in the Y direction indicates the size and the gray scale of the output value In this driver this value is fixed at 256 Xx output value indicates the output value in the range of O bright to 255 dark for an input value x Note Use a delimiter other than a number to delimit elements For most cases use a comma 73 Example 256 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 23 1 230 229 228 221 220 229 224 223 222 221220219218217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42
76. downloaded Error diffusion 0 9 sec or less 200 dpi A4 Single sided 50 pages per minute 200 dpi A4 55 kg Double sided 45 pages per minute 200 dpi A4 55kg 90 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction SEE Selectable Edge Enhancement Reverse With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation Enabled Brightness Threshold Contrast Gamma pattern Image processing function This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 132 Imprinter Endorser With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 char
77. dows 2000 They are also followed when using other operating systems Note that the expressions may vary with the type of scanner connected 1 4 Explanation of terms IPC option board IPC 2 2D in this guide refers to the IPC 2 and IPC 2D image processing circuit IPC 3 3D in this guide refers to the IPC 3 and IPC 3D option board IPC 4D in this guide refers to the IPC 4D option board 2 TWAIN 2 1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface API for data exchange between a software application program and an image input device such as the image scanner TWAIN development background In the past development of a new scanner inevitably required the development of a compatible driver and a sample demonstration program exclusively designed for the new scanner As the scanner is upgraded the driver may need to be upgraded as well to maintain its compatibility with the upgraded scanner Therefore the use is most likely to be restricted to one specific scanner model to avoid the complication of learning new operation methods and replacing the peripheral driver etc involved in scanner replacement In view of the incompatibility among different scanners and peripheral equipment and the accompanying inconvenience there was a demand for standardization of the related hardware and software and TWAIN was established as a result The user may now choose among a
78. e Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled SRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled 141 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Gray scale 8 bits output Halftone Patterns Color ADF scanning speed Hopper capacity Document size Supported regular paper Cutout specification Background compensation fi 4860C fi 4860C2 Desktop Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning 297mm x 878mm Black amp White only Fluorescent tube White 400 dpi Monochrome 400 300 240 200 150 100dpi Color 400 300 200 150 100dpi 10 bit 1024 levels Enabled Dither matrix Error diffusion 24bit lt Monochrome Asynchronous Scanning gt 60 pages per minute 200 dpi A4 80g m Double sided 60 pages per minute 200 dpi A4 80g m 120 screens per minute Single sided lt Color Asynchronous Scanning gt 60 pages per minute 150 200 dpi A4 80 m Double sided 60 pages per minute 150 200 dpi A4 80g m 120 screens per minute Single sided Maximum 500 sheets 80 m A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm or 297mm x 878 mm with L
79. e Memory on Scanner function Enabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled 119 Product M3093GX device name fi 4320S VSP210 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Isolation specification Background compensation Desktop Reduced optical system Document fixed scanner unit moving flat bed Automatic Document Feeder ADF Xe discharge tube Green 400 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 800 dpi at steps of 1 dpi 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 1 6 sec or less A4 200 dpi 27 pages minute 200 dpi A4 55 kg Maximum 50 sheets ream weight 55kg A4 Maximum 216 mm x 356 mm Legal size paper A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Execut
80. e following ways Click the left mouse button outside the range frame inside the scan document Select other paper types 27 4 7 Setting Options The option dialog is used to set device specific functions and the items that differ depending on whether the scanner used supports them The option specification is divided into Rotation Job Cache Generic Imprinter Endorser Start Up Filter and Compression The supported options depend on the scanner See Relevant Image Scanner Specification in the Appendix is displayed for options that cannot be used The option dialog in this driver is explained below The commonly used buttons are explained first OK Enables the new setting and terminates the option dialog box Cancel Cancel Disables the new setting returns the setting to the previous value and terminates the processing Help Help Displays online help 28 The options are described below 4 7 1 Rotation Rotation JobyCache Generic Startup Filter Compression Flip Side Rotation a Cancel Z H Book Sal Al Help Rotation Rotation Degree oa degree Automatic Size and Skew detection Automatic Page Size Detection Priority 18 Speed CCUAC Figure Option dialog Rotation Flip Side Rotation Flip Side Rotation k A g Book S aik A Specifies the binding of the d
81. ected the applicable scanner cannot be detected properly resulting in the unsuccessful update User response Connect one scanner to be updated and then execute this application software e The scanner is in the emulation mode Please release it from the emulation mode Cause Connected scanner device has been set to the emulation mode User response Referring the Operator s Guide of the device cancel the emulation mode and then execute this application software e The driver of the scanner is in use now Close the application software using the driver Cause This application software cannot be executed with the driver activated User response Close the application software that is using the driver and then execute the application software e Failed to obtain the model revision Please check the connection of the device Cause The device information may not have been obtained due to the wrong connection of the scanner User response After confirming the scanner connection execute the application software again 105 The applicable scanner is not connected or the driver is in use Please connect the applicable scanner or close the application software using the driver The process is cancelled Cause The scanner may not been connected properly or the driver may be used User response Check the connection of the device or close the application software if it is using the driver Then execute this application so
82. en installed in the image scanner Otherwise a large area or resolution that is not supported by the image scanner has been specified The memory inside the scanner may be insufficient due to the excessive data size of the scanning image Reduce the scanning area or resolution Otherwise install the memory option Refer to the User s Guide of the image scanner for more information In color scanning try to increase the data compression ratio 97 e The current parameter s is are not allowed Please use an other parameter s and try scanning again Cause An incorrect value has been specified for the image scanner The problem may be due to an illegal combination with the specification value from the application User response Change the specification values Then try scanning again e Irregular status is detected in scanner Cause A scanner fault such as a blown fuse or foreign matter in the scanning section has occurred User response Restart the scanner Confirm the cable connection Clean inside of the scanner If the error persists contact the retail store where the image scanner was purchased or the nearest maintenance and service center e Anomaly in the command for communicating with the scanner e Anomaly in communication with the scanner Cause The SCSI cable is not connected firmly or is disconnected User response Confirm the cable connection If the cable is disconnected replace the cable wit
83. er please contact the retail store where the product was purchased or the nearest service center e The Multifeed is detected Cause User response The papers are scanned with multifeeding One paper stuck to another Remove the papers stopped by multifeeding and reset them e Insufficient memory Cause User response There is not enough memory for tasks such as scanning and image processing It is likely that a program is consuming a lot of GDI memory and or there are too many applications and device drivers running in the background Lower the resolution Don t use the following image processing settings Automatic Page Size Detection Priority 4 Dropout Color None and Image Rotation Don t compress the file when saving it Change the PC memory s caching mode Increase virtual memory e An error occurred in the temporary file Cause User response Accessing the internal temporary file of the scanned image is causing the error The disk space may be insufficient the temporary file may be damaged or other programs may be affecting disk access Increase the free space of the disk Check the hard disk chkdsk and scandsk Make sure that no other program is accessing the disk If the error message persists contact the retail store where the product was purchased or the nearest service center e Download file not found Cause User response A file specified as a dither pattern
84. ere is sufficient free space on the hard disk to install the software Turn off the personal computer Connect the scanner to your PC Refer to Operator s Guide of the scanner for scanner connection In case of Windows 98 Windows Me Windows 2000 Windows XP or Windows Server 2003 FUJITSU TWAIN32 Version 9 18 is installed Refer to FUJITSU TWAIN32 Version 9 18 User s Guide 3 2 Starting Installation The screen and operations will differ slightly depending on the OS that is being used 1 Turn on the scanner 2 Turn on your PC and Log on to Windows When using Windows NT 4 0 log on as an administrator The scanner may be detected automatically and the Update Device Driver Wizard window is displayed In this case Click Cancel button to close this Wizard window Update Device Driver Wizard This wizard will complete the installation of Unknown Device by searching your local drives network and Internet locations for the most current driver If you have a disk or CD ROM that came with this device insert it now It is recommended that you let Windows search for an updated driver To do this click Next to continue 3 Insert the Scanner Driver CD ROM into the CD ROM drive gt lt SETUP DISK START UP SCREENS is displayed This Dialog is not displayed automatically when Auto play setting of your PC is off In this case please run Install exe in this CD ROM direc
85. ettings for the application to be started Install A new plug in can be installed Press the Install button and specify a file of the plug in to be installed A new plug in is registered in the list Up to 50 plug ins can be registered 82 lt lt Setting the Start button gt gt for fi 4990 M4099D If the scanner being monitored has function Keys F1 F2 it is necessary to assign a function key to the start button in advance If no function key has been assigned to the start button a dialog box for determining whether to set the start button is displayed when the dialog box is displayed after selecting Option on the pop up menu FUJITSU Scanner Control Center Adapter 1 505 1D 5 M 4099D dim Do you want to set the start button to the function key 2 The start button iz not set in the scanner function key E Selecting Yes displays a dialog box below If No is selected the function to start any application when the start button in this application is pressed is disabled The setting of the Start button function key Select one function key which you want to set the START E F ti F2 C F3 Pressing the OK button after selecting one of function keys from F1 to F3 enables assigning a function key to the start button If the Cancel button is pressed the function key is not assigned to the start button If the Cancel button is pressed the function to start any applic
86. evant Image Scanner Specification in the Appendix 32 4 7 2 Job Cache Rotation Job Cache Generic Startup Filter Compression Caching Cache Mode Ram cache gt Cancel Memory Size 10 Me Help ADF Option Batch Detection Noe Multifeed Detection Noe i asti S Pre Pick Panel Setting z CF Blank Page Skip W Blank Page Skip Black Dots Ratia I White Dots Flatio Jz Figure Option dialog Job Cache Caching Cache Mode None Specifies whether to pre read cache when a document is scanned This option enables faster scanning If processing of the application being used slows down and scanning stops this option can be used to prevent degradation of the scanning speed The effect however depends on the environment being used None Caching is not performed Read ahead One document page is scanned and the data is pre read and stored in PC memory main memory of the personal computer Ram cache E Memory Size 1 _ MB Prereads the allowable amount based on the allocated memory size and stores the data in PC memory A memory size between 1 and 200 MB can be set Use Memory on Scanner Pre reads using the memory installed in the scanner displayed only if supported by the scanner 33 Use Both Memory Pre reads using memory of both Scanner and PC displayed only if supported by the scanner Batch Detection Batch Detection None ba
87. f 0 to 255 x axis and output values of 0 to 255 y axis is indicated in blue lines Each graph dot represents one division unit Gradation The input is displayed in black and white in 256 single dot steps from 0 at the left border to 255 at the right border The gamma function of the scanner is displayed After saving it the displayed gray scale gamma function is fixed and constant The output values are displayed in single dots in relation to the input values and the brightness of the output equipment is displayed To ensure accurate display the display must be set for True Color or greater Gamma Calculation of the output values is based on the value y entered in the edit box the graph and the gradation are then displayed The values that can be input are integers greater than 0 or fractions lt lt Formula gt gt Output input 255 x 255 Input 0 255 Free Edit Designates whether to enable editing of the graph area directly using the mouse cursor If this box is checked the gamma pattern input edit box cannot be used and only editing using the mouse cursor is supported Smooth Designates whether to smooth edited curves This setting is only valid when Free Edit is selected In this setting the curved lines drawn by the mouse are automatically smoothed This is reflected in the graph and gradation display Reverse Designates whether to reverse black and white When this box is checked the current output
88. fi 5120C f1 5220C f1 5530C Figure Option dialog Start Up 43 Option Rotation Job Cache Generic Startup Filter Compression Scanner Operation Panel T Prefer Scanning W Enable Scanner Panel Speed W ADEZFB Automatic change M Enable SendIo Button j Enable FB Scanning Start Enable Scan Button In case of model fi 5750C Option Rotation Job Cache Generic Startup Filter Compression Scanner Operation Panel W Enable Scanner Panel M Enable SendTo Button M Enable Scan Button W Prefer Scanning Speed In case of model fi 5650C Figure Option dialog Start Up 44 Cancel Help Cancel Help Power Mode Power Mode f Quick Start Low Power Quick Start Mode This mode keeps the lamp on regardless the scanner s operating condition which saves times for lamp to become steady Low Power Mode To save the power consumption this mode turns the lamp off if the scanner is not operated for 14 minutes Enable Low Speed Feeding Enable Low Speed Feeding This is to specify to obtain a high quality image This function reduces times of start stop during the scanning to obtain a smooth and high quality image Prefer Scanning Speed Prefer Scanning x Speed This mode makes scanning speed becomes faster in color grayscale scanning When checking this check box scanning speed becomes faster but image quality is slightly deteriorated Che
89. for example JAN for January and FEB for February YMM The month is printed in two digits for example 01 for January and 12 for December YM The month is printed using one or two digits for example 1 for January and 12 for December DD The day is printed using two digits for example 03 for the 3rd day of the month and 26 for the 26th day of the month D The day is printed using one or two digits for example 3 for the 3rd day of the month and 26 for the 26th day of the month HH The hour is printed using two digits of the 24 hour clock for example 08 for 8 00 a m and 14 for 2 00 p m YH The hour is printed using one or two digits of the 24 hour clock for example 8 for 8 00 a m and 14 for 2 00 p m YoNN The minute is printed using two digits for example 02 for 8 02 a m and 48 for 2 48 p m YN The minute is printed using one or two digits for example 2 for 8 02 a m and 48 for 2 48 p m Nud A counter value is printed by N digits which increases or decreases with each page Programmable digits of the counter is 5 and 8 and described as 05ud and O8ud respectively See the Relevant Image Scanner Specification described in the Appendix since the programmable digits depend on the device The initial counter and the methods of increasing and decreasing values can be specified as explained above under the heading Counter This specification is only permitted at the end of an Imprinter String Endo
90. ftware again Failed to load the Flashwt dll Localize DLL version is different Data file is incorrect The process is cancelled Cause The relevant dill fail or the data file for update has not been installed correctly broken or deleted User response See section 3 and install the driver again 106 8 2 Device Trouble Related to Operation e The Scan button is pressed but scanning is not performed Cause Has the scanner power been turned on Has the SCSI cable been connected correctly Has the correct device type been selected using Select TWAIN Input Device e The scanner appears to be operating but no image is displayed Cause User response Has the SCSI cable between the scanner and the main unit been connected correctly Is the Brightness value or Threshold value too small When the Minimize button is pressed is the Restore button displayed Is the application set to perform only file output If the Restore button is displayed after the Minimize button 1s pressed the problem could be the display driver that is being used Contact the manufacturer of the display driver If a file has been selected as output destination with the environment settings by the image scanner operation confirmation utility try to change to screen output e When you don t know how to replace consumables User response Refer to section 6 How to Use the FUJITSU Scanner Control Center About how
91. g Therefore the printing can be included in a scanning result 39 x Post Imprinter Printing after scanning and on the back side of documents Prints on documents using the imprinter installed in rear part of the scanner In this case it prints on the back side of documents after scanning Therefore the printing is not included in a scanning result Pre Imprinter and Post Imprinter cannot be used at the same time Y Offset Printing Y Offset 0 mm Specifies Y Offset from the edge of the original for the placement of printing See Relevant Image Scanner Specification in the Appendix because the standard value specified here depends on the device Direction Printing Direction Top to Bottom Specifies the printing direction of endorsement strings When printing from the head of strings against to the direction of scanning designate Top to Bottom And when printing from the tail of strings against to the direction of scanning designate Bottom to Top However see the Relevant Image Scanner Specification described in the Appendix since the available settings depend on the device Font Printing Font Vertical z Specifies the type of character from the followings Horizontal A B C D 0 1 2 3 Printing direction Vertical N00 Ornn p gt Horizontal Narrow ABCD 0123 Available settings vary depending on your scanner Refer to Relevant Image Scanner Specification in the Appendix Bol
92. ge Edge Filler Digital Endorser Drop out color Enabled sRGB output Disabled Use Image Processing Software Option Enabled 115 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower fi 4220C Desktop Color CCD Reduced optical system Document fixed Flat bed FB Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Black amp White Max 216mm x 711mm Grayscale Color Max 216mm x 610mm Fluorescent tube White 600dpi 50 dpi to 600 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W 2 2 sec or less 200 dpi A4 Color 2 1 sec or less 150 dpi A4 B W Single sided 25 pages per minute 200 dpi A4 80g m Double sided 12 5 pages per minute 200 dpi A4 80 m 25 screens per minute Color Single sided 25 pages per minute 150 dpi A4 80g m Double sided 12 5 pages per minute 150 dpi A4 80 m 25 screens per minute Maximum 50 sheets A4 80 m High quality paper normal temperature and humidity Minimum 53mm x 74 mm Maximum 216mm x 355 6mm l
93. h flat bed scanning In case of fi 5750C this function can work correctly with flat bed scanning when Document holding pad black option sold separately is attached on the scanner Black Background If it is selected the outside of document paper becomes black by using black background during scanning White Background Use it to activate Overscan Both White Background and Overscan need to be selected for making Overscan effective If Overscan is not selected White Background functions the same as Disable This option may not be supported for some scanners See Relevant Image Scanner Specification in the Appendix Priority Priority es Speed ACCUIACY Setup for speed versus automatic document size detection Select a small value when scanning speed is the higher priority Select a large value when document detection accuracy is the higher priority Priority can only be setup when Automatic Page Size Detection is selected at Automatic Size and Skew Detection If the selection of Automatic Page Size Detection do not makes this function selectable you do not need to setup this function Overscan if Overscan This function makes the scanned images larger than the original documents by adding margins This option is available only when Black Background or White Background is selected for Automatic Size and Skew detection 31 This option may not be supported for some scanners See Rel
94. h new one If the error persists contact the retail store where the image scanner was purchased or the nearest maintenance and service center e Hardware Error was detected Carrier motor sensor was broken or Shipping Lock is set in Lock position Please refer to the user s manual for your scanner e Please confirm the shipping lock is unlocked Cause The Shipping Lock may not be set in Unlock position User response Check the Shipping Lock If the Shipping Lock is set in Lock position set the Shipping Lock in Unlock position referring to the user s manual for your scanner e Ink cartridge is not installed in the imprinter properly Please check the installation and try again Cause The imprinter Endorser has no ink cartridge or the ink cartridge may be mounted improperly User response Check that the ink cartridge of the imprinter is mounted properly and scan again e Imprinting position is set out of paper Please check the imprinting position and try again 98 Cause User response Printing is not available because the printing part is outside the paper width Adjust the imprinter so that the printing part is settled within the paper width e A Hardware Alarm is detected in the Imprinter or Endorser option Cause User response Failure on Imprinter or Endorser Please check if the Imprinter or the Endorser is installed completely If the error occurs after checking the Imprinter or the Endors
95. he User s guide attached to the IPC board since the function to be operated is different by the type of IPC At IPC 3 3D Noise Removal and OCR smoothing Background removal is enabled exclusively Noise Removal Noize Removal None This option automatically removes spots that appear as black stains in a white area and spots that appear as white stains in a black area This option uses an algorithm that removes particles from 2 x 2 to 5 x 5 dot matrixes The size of one dot depends on the resolution setting and is equivalent to 1 400 inch for 400 dpi Particles are distinguished from the text by whether they are connected to other dots within the specified number of pixels At IPC 3 3D Noise Removal and OCR smoothing Background removal is enabled exclusively Advance Front Image Mode Black amp White DTE mode Gray DTC Density Threshold Curve gt a Light E Filtering Moise Removal None W Ball point pen mode OCR SmoothingBackgroaund Removal Default Cancel Help Figure Advance dialog DTC Mode lt IPC 3 3D and IPC 4D installed gt 60 4 8 4 When Color Grayscale is specified For color scanners when Color is selected in the Image Mode the Advance dialog changes as follows And in case of some color scanners when selecting Grayscale the Advance dialog change as same as selecting Color There are two image samples which are
96. he application Some scanner models do not support this option See Relevant Image Scanner Specification in the Appendix Long page Front Side Scans a document longer than the paper size which can be specified by Paper Size In this case only the front sides of documents are scanned When this option is selected the Paper Size Setting dialog box opens Specify the size of the document to be scanned While the Long page is specified the preview window cannot be displayed and the scanning area cannot be specified In case of some scanner models while the Long page is specified color and grayscale settings can not be selected in Image mode Refer to Relevant Image Scanner Specification in the Appendix Depending on the scanner Resolution setting should be set to less than 400 dpi The Long page is not displayed in the Scan Type dropdown list if not supported by the device See Relevant Image Scanner Specification in the Appendix Long page Duplex Scans a document longer than the paper size which can be specified by Paper Size If this option is selected the documents are scanned in the front to back to front to back order 20 ADF Back Side Scans the documents on the device s automatic document feeder ADF Here only back sides are scanned Note To specify duplex scanning the number of copies designated should be based on the number of pages not the number of paper sheets I
97. he blemish around the paper edges by covering the area in Black or White color Page Edge Filler Filled Area Unit Inches Up 0 Down 0 e white C Black Lef Right oo Cancel About Color Select a color to paint over the image frame Can select White or Black Please specify either white or black to match the background color of the document Filled Area Unit Select a unit from Inches Miullimeters and Pixels Up Down Left Right Specify the paint area from each side of the scanned image in numbers Up Input width from the top edge of the image Down Input width from the bottom edge of the image Left Input width from the left edge of the image Right Input width from the right edge of the image Each value should be set in the following ranges 0 lt Up Down lt Image Length 0 lt Left Right lt Image Width If any values are out of these ranges this function may not work 48 Digital Endorser Character string such as the alphabet and number is added on the data of the scanned image By using this filter you can attach a name a date a time or a serial number on the scanned images and manage them Digital Endorse Printing 1 Offset t Offset Counter Initial Value 0 Counter f Increment Step Inc Dec 0 0 Decrement Sting String Scan rer AMM ZD HH NM 08ud Samole Scan 2003 1 01 8 23 18
98. hese documents clearly Halftone Halttone Dither Pattern Select the halftone pattern for halftone scanning from the built in pattern list Select the desired halftone pattern for displaying the obtained image This setting is effective when Halftone or Automatic Separation is selected in Image Mode Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Dither Pattern 0 Executes pattern processing that is suitable for scanning a dark photograph Dither Pattern 1 Executes pattern processing that is suitable for scanning a dark colored document containing both text and photographs Dither Pattern 2 Executes pattern processing that is suitable for scanning a light photograph Dither Pattern 3 Executes pattern processing that is suitable for scanning a light colored document containing both text and photographs Download Pattern Executes processing using the dithered download pattern specified in the dithered download file described later Some scanner models do not support this function See Image Scanner Specification in Appendix Error Diffusion Error Diffusion minimizes the difference between the pixel density of the scanned image and the pixel density of the printed image to create better reproduction of a scanned photograph Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix 23 Scanning Parame
99. hite background for photographs When Auto is selected the option automatically switches to the optimal setting based on the specified Image Mode White Level Follower is used to adjust the density of the white background of a document and correct variations in the background color by compensating the pixels of scanned images individually For ordinary use set White Level Follower to off Use of White Level Follower often increases the background noise because IPC 3 3D is very sensitive This option is not available if Gray Scale is selected for Image Mode In addition some scanner models do not support this option See Relevant Image Scanner Specification in the Appendix Dropout Color Dropout Color Panel setting You can scan images by removing one of the primary colors green red or blue which you select This is useful for example when you scan black letters with red outlines and you want only the black part of the letters to be scanned When White is selected no color dropout occurs but it may be some loss of light yellow color When None is selected no color dropout occurs but scanning may slow down depending on the compatibility of your PC s operating environment Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix 54 Reverse Reverse This option specifies whether to reverse the black and white of a scanned image If
100. hold Contrast 255 steps High light Shadow Gamma pattern Image processing function Individual setting 255 steps at Color Grayscale scanning 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction De Screen SEE Selectable Edge Enhancement Reverse 256 Color 8 Color 4bit Grayscale Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Image processing function This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 158 Imprinter Endorser With Imprinter option Reverse side minimum left margin printing position of 5mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Font orientation Vertical Horizontal Bold font Enabled Interface SCSI II USB 2 0 Preview Enabled at Flat bed scanning only Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache
101. ich appears when you click on the button 17 Resolution Setting Best Better Normal Baler 300 x 300 200 x 200 150 x 150 Grayscale 400 400 300 x S00 x 200 200 ki Black amp White 600 600 al 400 400 od 300 300 7 Default Cancel Resolutions for Image modes Color Grayscale and Black amp White of the each predefined settings are changed corresponding to the selection of the Image Type Click Default button to return the resolutions to the default value High resolution produces finer images meanwhile requires more memory that leads to longer scanning time The supported resolution depends on the type of scanner and the options installed Refer to Relevant Image Scanner Specification in the Appendix Paper Size Paper Size i Letter 6 51 Tir JF Specifies a document size for scanning Select a standard size or Custom size can be registered up to three from the list Window for customizing the paper size will appear when you click on button besides the list On this window you can change the order of the paper size in the list Paper Size Paper Size LetterL 11 8 5in Legal 8 51 4in US Executive 7 25270 Sin US Executive 10 587 25n Double Letter 1181 7in AS 29 e420m0m AA 210629 rm AAL 297827 0mm AB 1 48e21 Orn ABL 21081 48mm AB 105 148mm ABL 1461 05mm Custom button Used for config
102. ied Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal Enabled Brightness Threshold Contrast Gamma pattern Image processing function SCSI II Enabled at Flat bed scanning only Enabled An eight megabyte expanded memory option can be loaded in some models This speed is only specified in the scanner itself The actual reading speed may vary depending on the system configuration Not all sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 122 Rotation Enabled Automatic Size and Skew detection End of Page Detection Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled SRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled 123 Product Type Image sensor Operating method Light source Basic resolution Output resolution
103. inate x and the Y coordinate y Note Use a delimiter other than a number to delimit elements For most cases use a comma In case of fi 5650C fi 5750C you can specify the value from 1 to 32 71 Example In case of 8x8 matrix 8 8 128 128 128 128 128 128 128 128 255 128 128 128 128 128 128 128 255 255 128 128 128 128 128 128 255 255 255 128 128 128 128 128 255 255 255 255 128 128 128 128 255 255 255 255 255 128 128 128 29952995 255 255 255 255 128 128 25572355 255 2959 235 233 233 128 e a 8 elements 8 elements 12 Gamma download pattern file Any user defined gamma correction processing can be performed by downloading the pattern from the gamma download file to the scanner The defined pattern becomes effective when Download Pattern is selected for Gamma Pattern Some models do not support this file See Relevant Image Scanner Specification in Appendix Although the standard extension of the file name is GMA there may be exceptions Creation of a gamma download pattern file can be facilitated using the following utilities for editing the gamma correction pattern Coding configuration gray scale in the X direction gray scale in the Y direction XO output value X1 output value X2 output value X253 output value X254 output value X255 output value Meaning of each element gray scale in the X direction in
104. inute 200 dpi A4 55 kg Double sided 55 pages per minute 200 dpi A4 55kg 110 screens per minute Color Single sided 55 pages per minute 200 dpi A4 55 kg Double sided 55 pages per minute 200 dpi A4 55kg 110 screens per minute Maximum 200 sheets ream weight 80 kg A4 High quality paper normal temperature and humidity Minimam 53mm x 74mm Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern 255 steps at Color Grayscale scanning 3 internal types can be downloaded This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 160 Image processing function Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction De Screen SEE Selectable Edge Enhancement Reverse 256 Color 8 Color 4bit Grayscale Individual setting Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Image processing function Interface SCSI II USB 2 0 Preview Enabled at Flat bed scanning o
105. ion Printing Top to Bottom Pre Imprinter Post Imprinter switching Enabled Interface Ultra Wide SCSI Preview Disable Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Deskew Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Use Memory on Scanner function Enabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Enabled Check Over skew Enabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled If 0 mm is specified as the endorser print position printing will begin 5 mm from the edge of the page The Automatic Deskew and Automatic Page Size Detection are not supported with color scanning Batch Detection can not be used with following Caching Use Memory on Scanner or Use Both Memory 2 143 Product M4099D fi 4990 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Gray scale 8 bits output Halft
106. ion does not work properly for some applications Automatic Deskew When scanning with the ADF this option detects skew of the document being fed and automatically corrects the skew Automatic Page Size Detection Scanning with the ADF and Automatic Page Size Detection selected the output will adjust to the page size detected Document skew can be detected and can be corrected for the output image Output data size will be equal to each document scanned in a multi page scan When page size is detected incorrectly set up the Page size to the largest size page in the set For example With Automatic Page Size Detection is selected it also need to select a Paper Size example Double Letter 11 x17 in the set If any paper size within the 30 selected Double Letter paper size range is used for scanning the output will adjust to the page size detected However in case of fi 4860C fi 4860C2 fi 4990C fi 5650C fi 5750C this function is not dependent on the setting of Paper size because these scanners always scan documents as the maximum paper size and detect the paper size from the scanned data This function does not work properly for some applications However some detection cannot be corrected for example an unfixed long image folded corner document has uneven width for the length of the page This function becomes effective only when scanning with the ADF It may detect incorrectly when this function is chosen wit
107. it output ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower fi 5120C Desktop Color CCD Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Max 216mm x 864mm Fluorescent tube White 600 dpi 50 dpi to 600 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W Single sided 25 pages per minute 200 dpi A4 80g m Double sided 25 pages per minute 200 dpi A4 80 m 50 screens per minute Color Single sided 30 pages per minute 150 dpi A4 80g m Double sided 30 pages per minute 150 dpi A4 80 m 60 screens per minute Maximum 50 sheets A4 80 m High quality paper normal temperature and humidity Minimum 53mm x 74 mm Maximum 216mm x 355 6mm A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern Image processing function 255 steps at Color Grayscale scanning Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern Simplified Dynamic Threshold SDTC De Screen Edge emphasis 256 Color 8 Color 4bit Grayscale
108. ive Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting Interface Preview Flip Side Rotation Rotation 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Image processing circuit II required Edge emphasis Edge extraction Automatic separation Mirror image Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal Disabled SCSI II Enabled at Flat bed scanning only Disabled Enabled Automatic Size and Skew detection Disabled Overscan Buffer scan Use Memory on Scanner function Disabled Disabled Use of this scanner requires that the image compression option board CMP 2 be installed in the scanner This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 120 Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled SRGB output Disabled Use Im
109. ize Width needs to equal 279 mm or less and length needs to equal 420 mm or less The value for custom paper is higher than the maximum scan size Width needs to equal 11 inch or less and length needs to equal 16 53 inch or less The value for custom paper is higher than the maximum scan size Width needs to equal xxx pixel or less and length needs to equal xxx pixel or less Cause A value exceeding the limit applicable to the scan area of the scanner was specified User response To specify a custom paper size specify the value that is smaller than the value applicable to the device The value for custom paper is greater than the maximum scan size Width need to less equal 259mm The value for custom paper is greater than the maximum scan size Width need to less equal 10 24inch The value for custom paper is greater than the maximum scan size Width need to less equal 2048pixel Cause A value exceeding the limit applicable to the scan area of the scanner was specified User response To specify a custom paper size specify the value that is smaller than 259mm 10 24inch 2048pixcel The resolution must be less or equal to xxx dpi when scanning in Gray Scale The resolution must be less or equal to xxx dpi when scanning in Color Cannot specify Long Page Scan Width need to less equal 400dpi Cause There is a limit on the resolution when gray scale scanning long page scanning or color scanning 1s used User response Spe
110. kew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Use Memory on Scanner function Enabled Batch Detection Enabled Multifeed detection Enabled Check overlapping length Area selection Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled Device set Consumables replace Pad Pick Roller counter clear Offset Setting Vertical magnification Adjustment Lamp timer Area Selection for Multifeed Detection Power ON OFF Control setting 155 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Gray scale 8 bits output Halftone Patterns Color 24bits output ADF scanning speed Hopper capacity Document size Supported regular paper Scanning area specification White level follower fi 5530C Desktop Color CCD Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Resolution free Black amp White Maximum 29
111. levels internal Grayscale output Halftone Patterns ADF scanning speed Double sided Hopper capacity Document size Supported regular paper Cutout specification White level follower M3099GH Desktop Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Fluorescent tube Green 200 dpi Standard 400 300 240 200 dpi with image processing option 50 dpi to 400 dpi at steps of 1 dpi 8 bit 256 levels Disabled Dither matrix can be downloaded Error diffusion Single sided 80 pages per minute 200 dpi A4 55 kg 60 pages per minute 200 dpi A4 55 kg 120 screens per minute Maximum 1 000 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 216 mm x 356 mm A4 A4 Landscape A5 A5 Landscape B5 B6 B6 Landscape Letter Legal US Executive Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting Imprinter Endorser Interface 3 internal types can be downloaded Simplified Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal Enabled Brightness Threshold Contrast Gamma pattern Image processing function With imprinter endorser option Reverse side minim
112. ll be turned ON OFF by connecting disconnecting the power supply Power button will no longer work If the scanner is equipped with a main power switch the main power switch needs to be set at ON This button may not be displayed for some scanner models About Adjustment of Offset Magnification When clicking the Offset button the following dialog appears Offset Offset Setting Unit ADFItront Main OH 0 5mm Sub i s0 Srm i Vertical magnification Adjustment Unit ADF 3 1 31 3 1 to 3 14 ST a 2 Cancel Note Depend on some scanner models once the Scanner Information tab appears the operation panel is unable to be handled In this case close this dialog and turn the power 89 ON OFF of the scanner After the scanner setup the operation panel is able to be handled Using this dialog box the offset of the leading edge and the magnification for the sub scanning direction can be changed Offset Setting If the position of the scanned image shifts from the original document fine adjustment is possible At shipment the offset has been adjusted to an optimum value within a certain range Therefore adjustment is not generally required The maximum size of changes depends on the device Enable eliminating a dark area on the top of the image Enable eliminating a dark area on the left side of the image These modes can be selected to eliminate the dark area on
113. ll paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 148 Individual setting Enabled Brightness Threshold Contrast Gamma pattern Image processing function Imprinter Endorser With imprinter endorser option Reverse side minimum left margin printing position of 20 mm Maximum number of characters to be printed 20 characters Counter display range 0 to 65535 5 digits display Direction Printing Top to Bottom Interface SCSI II Preview Disabled Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection Disabled Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled when Ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled IfOmm is specified as the endorser print position printing will begin 20 mm from the edge of the page 149 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale
114. ll the input devices and software driver or application programs conforming to the TWAIN standard and configure a most suitable system for himself without being restricted to the products of a certain series or a certain manufacturer 2 2 TWAIN Application TWAIN mainly applies to the following three software components Application software Source manager Source The components are related to each other as shown below Application software photo retouching software etc Source manager TWAIN DLL TWAIN_32 DLL etc Source Image scanner control of the driver etc Image scanner etc Figure TWAIN Application 3 Installation 3 1 Preparation 1 2 3 Check that the operating system is installed correctly Check that the SCSI adapter is installed to the computer Check whether the SCSI driver and ASPI manager are installed correctly and operating Note Version 4 01 or later of the ASPI Manager is required For Windows 2000 or Windows Me ASPI manager must be version 4 60 or later For Windows XP ASPI manager must be version 4 70 or later Use Explorer or My computer to check the version number of the WNASPI32 DLL file If the previous version was installed first confirm that it has been uninstalled deleted When uninstalling old versions select Control Panel Add or Remove Programs on the Start menu and uninstall Scanner utility for Microsoft Windows Confirm that th
115. m A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape Double Letter Letter Letter landscape Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting Interface Preview Flip Side Rotation 3 internal types can be downloaded Simplified Dynamic Threshold SDTC With image processing option Edge emphasis Edge extraction Automatic separation Mirror image Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal Enabled Brightness Threshold Contrast Gamma pattern Image processing function SCSI II Enabled at Flat bed scanning only Enabled This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 140 Rotation Enabled Automatic Size and Skew detection End of Page Detection Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardwar
116. ment whose background color is not white such as a newspaper Select Auto Enable or Disable When Enable is selected the document is scanned using background follow up for line drawings When Disable is selected the document is scanned using the standard basic white background for photographs When Auto is selected the option automatically switches to the optimal setting based on the specified Image Mode White Level Follower is used to adjust the density of the white background of a document and correct variations in the background color by compensating the pixels of scanned images individually Some scanner models do not support this function Refer to Relevant Image Scanner Specification in Appendix Reverse Color Grayscale Reverse This option specifies whether to reverse the black and white of a scanned image If this option is selected color data is reversed If this option is not selected the color values of the reproduced image correspond to the original image 64 Some applications do not permit normal operation If this occurs contact the manufacturer of the application Some scanner models do not support this function Refer to Relevant Image Scanner Specification in Appendix Dropout Color Grayscale only Dropout Color Panel setting Y You can scan images by removing one of the primary colors green red or blue which you select This is useful for example when you s
117. mum 216 mm x 356 mm A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern Image processing function Individual setting 255 steps at Color Grayscale scanning Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern Simplified Dynamic Threshold floating slice De Screen Edge emphasis Reverse 256 Color 8 Color Disabled Change processing is done inside the driver This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 114 Interface SCSI II Preview Enabled at Flat bed scanning ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection Disabled Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Disabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Enabled Filter Pa
118. n See Relevant Image Scanner Specification in Appendix 24 4 5 Specifying Driver Operation Preview Preview Scans in a preliminary image based on set values and displays the image in the preview window Before actual scanning the preview function can be used to display the entire document for specifying the desired scan area Some models do not support this function See Relevant Image Scanner Specification Scan can Scans the specified scan range based on set values The following progress indicator is displayed during scanning to show the progress of the scan operation To stop scanning click the Cancel button The character string indicates the data transfer mode used between the driver and the application TWAIN Driver 32 ater Mode Native Infor matiory HA Scanning Progress indicator Close OK Glose OK Closes the dialog box without scanning If a setting is changed the changed setting is saved in the initial value file Reset Reset Restores the current setting values to the status immediately after the window is opened 25 Help Help Displays online help When the F1 key is pressed help information regarding the item on which the cursor is placed is displayed Note Depending on the application used help information may not be displayable with the F1 key This is because the driver operation is controlled through
119. n other words one original with a front and back is regarded as two pages Image Mode Image Mode Black amp White Selects an image mode for scanning the image Select a corresponding image mode from the list Black amp White Scans data by using the fixed threshold binary black and white Distinguishes black from white by the setting in the Threshold of Scanning Parameter This scanning mode is suitable for scanning line drawings and text documents Halftone Dither Scans data using the halftone processing with dithering or error diffusion Uses the patterns set in Halftone to simulate data in black and white Selection of built in dithered patterns or error diffusion not supported by some device models is allowed This scanning mode is suitable for scanning images containing light and shadow such as a photograph Gray scale Scans data using 256 level monochrome gray scale Light and shade in photographs can be represented with greater fidelity This scanning mode employs far more memory than the Black amp White mode Some versions of the scanner do not support this scanning mode For details contact the retail store where the device was purchased Abit Gray scale Scans data using 16 level monochrome gray scale Data size is smaller than Gray scale selected Some versions of the scanner do not support this scanning mode For details contact the retail store where the device was purchased
120. nd e An abnormality has occurred during communication Make sure that the power is on and that the cable is firmly connected e Communication failed Make sure that the power is on the cable is firmly connected and the scanner is not used by another application e An abnormality has occurred during communication Cause Possible causes include the following an image scanner that is not supported by this driver has been connected no image scanner has been connected or the cable is not connected Otherwise the initial values of the image scanner were overwritten while the driver was open User response Check the connection of the image scanner Check the scanner is not used by other application e The specified image scanner is being used Cause The image scanner may be already in use by another application or the TWAIN driver may have been started twice User response User response After all applications are terminated restart the image scanner for scanning e An input output error occurred in the image scanner Cause A fault occurred during the scan operation of the image scanner There may be a fault in the image scanner itself User response Turn off the power of all devices then turn on the power of the computer before turning on the scanner and retry scanning If the error still occurs contact the retail store where the image scanner was purchased or the nearest service center 96 e Scanner is turned
121. nly Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Use Memory on Scanner function Enabled Batch Detection Enabled Multifeed detection Enabled Check overlapping length Pre Pick Enabled Check Over skew Disabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled 161 9 2 Maintenance Service This section explains briefly how you can help us to provide you with high quality maintenance service Since it is practically impossible for the Fujitsu service staff to be aware of every detail of your daily scanning operation please understand that our staff may sometimes be unable to answer your question immediately To help us in our effort to provide you with the best maintenance service possible we ask you to kindly write down the following items as many as possible Serial number version and date etc of this product Name and product number of the image scanner being used The options installed on the image scanner being used Manufacturer product name
122. ocument when both sides are scanned using ADF Book Outputs the scanned image for both sides as is Select this option to scan documents bound on the left or right side Fanfold Outputs the scanned image of the backside rotated 180 degrees Select this option to scan documents bound on the top or bottom Front side and backside are printed conversely When scanning from the top to bottom for the printing direction of the document this setting outputs the image with the front and backsides printed in the same direction 29 Rotation Degree Rotation Degree oo degree hi Outputs the scanned image rotated to the right or left 90 degrees 0 0 degree Outputs the scanned image as is 90 0 degree Outputs the scanned image rotated 90 degrees to the right clockwise 90 0 degree Outputs the scanned image rotated 90 degrees to the left counterclockwise 180 0 degree Outputs the scanned image rotated 180 degrees top and bottom reversed Automatic Size and Skew detection Gutomatic Size and Skew detection Disable Disable This option outputs the image as it was scanned End of Page Detection Scanning with the ADF and page length detection selected will output data for the page size detected The image data output will adjust to the page length detected for each page including smaller size pages Data cannot be output for page sizes greater than the length setup in Page Size This funct
123. on Edge emphasis Edge extraction Automatic separation Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal Enabled Brightness Threshold Contrast Gamma pattern Image processing function This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 144 Imprinter Endorser With endorser option Reverse side minimum left margin printing position of 20 mm Maximum number of characters to be printed 30 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display There are partly limitations by the revision of the scanner device Direction Printing Top to Bottom Interface SCSI II Preview Disabled Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Deskew Overscan Disabled Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Use Memory on Scanner function Enabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compression Disabled Filter Page
124. on End of Page Detection Automatic Page Size Detection Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the endorser print position printing will begin 42 mm from the edge of the page 131 Product M4097D fi 4750 VSP330 Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Isolation specification Background compensation Desktop Reduced optical system Document fixed Flat bed Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning 297mm x 1387mm Black amp White only Xe discharge tube Green 400 dpi Standard 50 dpi to 800 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be
125. one Patterns ADF scanning speed Hopper capacity Document size Supported regular paper Cutout specification Background compensation Desktop Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning 297mm x 878mm Black amp White only Fluorescent tube White 400 dpi Standard 400 300 240 200 dpi With image processing option 50 dpi to 400 dpi at steps of 1 dpi 10 bit 1024 levels Enabled 200 dpi only Dither matrix can be downloaded Error diffusion lt Asynchronous Scanning gt 90 pages per minute 200 dpi A4 55 kg Double sided 90 pages per minute 200 dpi A4 55 kg 180 screens per minute Single sided lt Synchronous Scanning gt 80 pages per minute 200 dpi A4 55 kg Double sided 60 pages per minute 200 dpi A4 55 kg 120 screens per minute Single sided Maximum 1 000 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting 3 internal types can be downloaded Simplified Dynamic Threshold SDTC With image processing opti
126. ong Page scanning mode A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern 255 steps at Color Grayscale scanning 3 internal types can be downloaded For fi 4860C2 the FUJITSU TWAIN 32 Scanner Driver V8 18 166 or later is required This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Color scanning speed is a value with JPEG enabled Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 142 Image processing function Dynamic Threshold SDTC DTC Edge emphasis Edge extraction Automatic separation Mirror image Black amp White only Reverse 256 Color 8 Color Abit Grayscale Individual setting Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Image processing function Imprinter Endorser With Imprinter option Pre Imprinter Post Imprinter Reverse side minimum left margin printing position of 5 mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direct
127. or details refer to the users manual for the device For other paper sizes the customer settings can be used 134 Imprinter Endorser With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI I Preview Enabled at Flat bed scanning only Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Enabled If 0 mm is specified as the endorser print position printing will begin 42 mm from the edge of the page 135 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels inte
128. or the Option Rotation Automatic Size and Skew detection Dither pattern file not found File download has been specified but a file has not been selected Use the File button to specify a file Gamma pattern file not found File download has been specified but a file has not been selected Use the File button to specify a file Selected file can not be deleted If the selected setting file is write protected it cannot be deleted Use Explorer to delete the file later Description not specified The description of the setting file has not been specified Enter the description of the setting file in the description field Then try scanning again Filename not specified The filename of the setting file has not been specified Enter the filename of the setting file Then try scanning again 95 e Specified string is too long Cause The specified string is too long Up to 128 en size characters and up to 64 em size characters can be specified User response User response Reduce the number of characters in the string so that they do not exceed 128 en size characters Then try scanning again e Cannot specify next words for filename lt gt Cause The specified filename contains one or more of the following characters lt gt User response Enter a file name that does not contain the above characters Then make the settings again e The image scanner not fou
129. rea or the scanned document Y coordinate Width The width of the scan area Length The length of the scan area These values are related to one another in the following way 0 lt left end coordinate lt paper width minimum scan area size 0 lt top end coordinate lt paper length minimum scan area size Minimum value lt width lt paper width left end coordinate Minimum value lt length lt paper length top end coordinate 19 Scan Type Scan Type L ADF Front Side Selects the feeding device The image scanner uses a document bed called the flat bed as well as an automatic document feeder ADF for feeding scanned document The ADF usually enables the documents to be scanned only once The flat bed allows scanning the same documents repeatedly Flat bed Scans a document placed on the flat bed of the device ADF Front Side Scans the documents on the device s automatic document feeder ADF Here only the front sides are scanned ADF Duplex To scan both the front and the back of a page select this option If this option is selected the documents are scanned in the front to back to front to back order This option can be used only for scanner models that support duplex scanning The Duplex Function requires that the calling application supports continuous scan If the application does not support continuous scan only the data for the front side of the page is passed to t
130. rnal Grayscale output Halftone Patterns Color Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Isolation specification Background compensation fi 4750C Desktop LED RGB Reduced optical system Document fixed Flat bed Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning 297mm x 1387mm Black amp White only LED R G B Horizontal scanning 400 dpi Vertical scanning 800 700 600 500 400 300 240 200 150 100 dpi Standard 50 dpi to 800 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 24bit B W 0 9 sec or less 200 dpi A4 Color 3 6 sec or less 200 dpi A4 B W Single sided 50 pages per minute 200 dpi A4 55 kg Double sided 45 pages per minute 200 dpi A4 55kg 90 screens per minute Color Single sided 12 pages per minute 200 dpi A4 55 kg Double sided 11 5 pages per minute 200 dpi A4 55kg 23 screens per minute Maximum 100 sheets ream weight 55 kg A4 High quality paper normal temperature and humidity Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps High ligh
131. roduce output that has the desired linear relation to the input and the resulting distortion must be corrected One of the following can be selected as a correction pattern Normal Soft Sharp Download Pattern or Custom Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Download Gamma Pattern Selection jii a aes ae Cancel Add Delete When Download Pattern is selected the above dialog box opens 53 Select the gamma pattern download file to be used from the list of file names Then press the OK button Correction will then be executed using the selected gamma pattern If the gamma pattern download file has not been registered in the list of file names use the Add button to register the file See Download Pattern File for information about how to specify the file Custom 22 When Custom is selected a custom specification can be entered Entering an arbitrary value between 0 1 and 10 0 enables a gamma pattern corresponding to the entered value to be specified White Level Follower White Level Follower aut Select this option to scan a document whose background color is not white such as a newspaper Select Auto Enable or Disable When Enable is selected the document is scanned using background follow up for line drawings When Disable is selected the document is scanned using the standard basic w
132. roll and be sure to read the remaining portion of a text lt 32 bit version gt README File aen wet Copyright C PFU LIMITED Se gt Please read this file before using this product The file includes v b InstallShield Cancel 9 Carefully read the License Agreement and then click Yes button if you agree Scanner Utility for Microsoft Windows Setup s j x License greement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest of the agreement PLEASE READ THE FOLLOWING TERMS AND CONDITIONS BEFORE YOU USE THIS SOFTWARE YOUR SELECTION OF Yes BUTTON INDICATES YOUR UNDERSTANDING AND ACCEPTANCE OF ALL OF THE FOLLOWING TERMS AND CONDITIONS LICENSE AND COPYRIGHTS You may use the Software solely on a single computer at a time For the avoidance of doubt you acquire only a limited right to use the Software hereunder and FUJITSU or any third party developer retains all rights including but not limited to copyrights in and to the gt Do you accept all the terms of the preceding License Agreement If you choose No the setup will close To install Scanner Utility for Microsoft Windows you must accept this agreement InstallShield gek ve u If you click No button the installation is stopped 10 Confirm Destination Folder and then click Next gt button Scanner Utility for Microsoft Windows Setup E xj
133. rser Sample ample 2001 403 08 22 42 00000 Displays the output examples of the String specified above Note The counter date and time do not always look like the sample because this string is output during scanning 50 4 7 7 Compression Click this tab and mark the check box to enable or disable JPEG compression for data transfer from the image scanner This function is available only for Color or Grayscale scans Option Rotation Job Cache Generic Startup Filter Compression Hardware Compression Cancel W JPEG Transfer Help Enable Color and Grayscale Jpeg Quality _Tererere High Compression High Quality Figure Option dialog Compression Imprinter String Endorser Converts scanned image data into JPEG format for transfer Because of smaller data size data transfer time is shorter than that of ordinary method when the check box is not marked Jpeg Quality Specifies data compression rate for JPEG transfer Increase the value when you prefer to get finer image quality otherwise decrease the value for smaller data size Note Image quality may deteriorate due to scanning with JPEG compression When JPEG compression is enabled lengths and widths of images may slightly be different from that of the scans without JPEG compression This function may not be available for some image scanner models 51 4 8 Setting Advance Options The advance dialog is used to se
134. s Color Grayscale Contrast Hi Brightness 955 Contrast Sets the contrast of light and shadow in a scanned image Specify the contrast with a number in the range of 1 low soft to 255 high sharp If this value is increased the dark part of the image is shown darker and the light part is shown lighter Some scanner models do not support this function See Relevant Image Scanner Specification in Appendix Brightness Sets the brightness of the overall image Specify the brightness with a number in the range of 1 light to 255 dark To darken the overall image increase the value of the setting To brighten the overall image decrease the value Gamma Color Grayscale Gamma Hi This option corrects distortions from nonlinear image representation Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document However most output terminals do not produce output that has the desired linear relation to the input and the resulting distortion must be corrected An arbitrary range is between 0 1 and 10 0 Preset Gamma Grayscale only Preset Gamma Normal bj This option corrects distortions from nonlinear image representation Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document However most output terminals do not produce output that has the desired linear relation to the input an
135. s Simplex gt gt Duplex gt gt Simplex each time the Duplex button is pressed ADF FB Automatic change M ADEFE Automatic change It distinguishes whether to scan from the ADF or from the Flat Bed FB and changes automatically When a document is on the ADF scanning is started from the ADF And when no document is on the ADF scanning is started from the FB Enable Send to button Jf Enable SendTo button Specifies whether the preview is started by pressing the Send to button on the device Enable FB Scanning Start i Enable FB Scanning Start Specifies whether Scanning is started by closing the Flat bed cover When setting the document on the Flat bed and closing the Flat bed cover scanning Starts Enable Scan Button W Enable Scan Button Specifies whether scanning is started by the Scan button 46 4 7 6 Filter Set the filter processing in this dialog The filter name is displayed in the list box While checking the checkbox in the left of the filter name the filter processing is applied to scanned image When selecting a filter name and clicking Property button the setting dialog of the filter 1s displayed Option Rotation Job Cache Generic Startup Filter Compression H Digital Endorse Cancel Page Edge Filler Help Property Figure Option dialog Filter The type of filter and the setting details are explained below 47 Page Edge Filler Eliminates t
136. s minute 200 dpi A4 55 kg Maximum 100 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function Individual setting Interface Preview Flip Side Rotation Rotation 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Image processing option installed Edge emphasis Edge extraction Automatic separation Mirror image Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal Disabled SCSI II Enabled at Flat bed scanning only Disabled Enabled Use of this scanner may require installation of the optional image compression board CMP 2 This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 138 Automatic Size and Skew detection Disabled Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled B
137. s of 1 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion 2 0 sec or less A4 200 dpi 21 pages minute 200 dpi A4 55 kg Maximum 50 sheets ream weight 55 kg A4 High quality paper Normal temperature and humidity Maximum 297 mm x 432 mm A3 or Double letter sized paper A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Legal Double letter US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma patterns Image processing function Individual setting Interface Preview Flip Side Rotation Rotation 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Image processing option installed Edge emphasis Edge extraction Automatic separation Mirror image Reverse Dynamic Threshold DTC Smoothing Filtering Noise removal Disabled SCSI II Enabled at Flat bed scanning only Disabled Enabled Automatic Size and Skew detection Disabled Use of this scanner may require installation of the optional image compression option board CMP 2 in the scanner device This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all sizes of paper can be used in all devices For details refer to the users manual for the device For other paper sizes
138. s used to set the inclination and density level between O and 7 The figure on the right is not displayed Gamma Curve Gamma Curve ocr 1 This option specifies the gamma correction curve pattern The available choices depend on the Scan mode setting In for OCR mode select OCR1 or OCR2 In for Image mode select Dark Image or Even For IPC 3 3D and IPC 4D the gamma curve need not be specified because the contrast 1s adjusted automatically Gamma Curve is not displayed Equal to White Equal to White At conversion to binary this option specifies whether to set the data to black or white when the threshold value and the value of the scanned data are equal This option is not available for IPC 4D Ball Point Pen Mode Ball point pen mode When an image made with a pencil or ball point pen is scanned the light reflected from the pencil lead or ink is not uniform As a result part of the image may be missing If the Ball Point Pen checkbox is checked filtering is applied to offset the bright area in the document and compensate for disconnected or faint lines 59 OCR Smoothing Background Removal OCR Smoothing Background Removal The OCR smoothing is the function to make smooth the notched part of line drawing and the Background Removal is the function to remove the uneven background These functions are enabled when it is selected For further information please refer to t
139. set to the folder where the FUJITSU scanner Control Center has been installed To change the setting of the function key Access Authority of the folder where FUJITSU scanner Control Center has been installed is required Set Access Authority to the folder where FUJITSU scanner Control Center has been installed or execute it with Administrator Authority e Scanner is not selected Please select a scanner Cause User response The OK button was pressed without selecting the scanner in the scanner Select dialog Press the OK button after selecting the scanner to be monitored 104 8 1 4 Messages relating to the Firmware Updater e The firmware updater is already running Cause The same application software is tried to execute concurrently User response Use the one already executed e ASPI manager has not been installed Please install the ASPI manager e ASPI manager of unsupported revision has been installed Please install the ASPI manager of the revision 4 1 or later Cause The ASPI manager has not been installed or revision may be old User response After installing the ASPI manager of revision 4 0 or later For Windows 2000 or Windows Me 4 60 or later For Windows XP 4 70 or later execute this application software e More than one scanner is connected Please connect only one scanner Cause Scanners other than the one with the firmware to be updated are connected If more than one scanner is conn
140. ssion Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled sRGB output Enabled Use Image Processing Software Option Enabled Use of FUJITSU Scanner Control Center Enabled Device set Consumables replace Pad Pick Roller Remaining Ink counter clear Offset Setting Vertical magnification Adjustment Lamp timer Area Selection for Multifeed Detection Power ON OFF Control setting If 0 mm is specified as the printing position printing will begin 5 mm from the edge of the page 153 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output Flat bed scanning speed ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower fi 5220C Desktop Color CCD Reduced optical system Document fixed Flat bed FB Automatic Document Feed ADF Simultaneous double sided scanning Long page scanning Max 216mm x 864mm Fluorescent tube White 600dpi 50 dpi to 600 dpi at steps of 1dpi 10 bit 1024 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W 2 2 sec or less 200 dpi A4 Color 1 7 sec or less 150 dpi A4 B W Single sided 25 pages per minute 200 dpi A4 80g m Double sided 25 pages per minute 200 dpi
141. stalled User response Two or more plug ins assigned to the same name cannot be installed The specified file is not the effective plug in Specified file can not install Can not find the entry point of the specified plug in Specified file can not install Cause The specified file may not be the effective plug in User response Check whether the specified file is the effective plug in and retry Exceeded the number of plug in to be supported Can not install the new plug in Cause The number of plug ins to be supported was exceeded User response The maximum number of plug ins that can be supported is 50 Delete unnecessary plug ins in the folder where FUJITSU Scanner Control Center has been installed then install another plug in The plug in has not been installed Cause The check box Use a Plug In was checked but no plug in has been installed User response To use a plug in install a plug in then check the check box Use a Plug In Can not find the application for the Plug in use Can not use the specified plug in Cause The application to be used for the plug in may not have been installed User response Verify that the application to be used for the plug in has been installed If no application is found install it 103 e Scanner could not find although it searched again Check the connection of the scanner and retry again Cause User response The scanner power may not have been turned on or the cable ma
142. stern calendar YYY The year is printed using the two digits of the Japanese calendar current or Heisei era YY The year is printed in the last two digits of the Western calendar MMM An English abbreviation of the month is printed for example JAN for January and FEB for February 41 MM M DD D HH H NN N Nud Sample The month is printed in two digits for example 01 for January and 12 for December The month is printed using one or two digits for example for January and 12 for December The day is printed using two digits for example 03 for the 3rd day of the month and 26 for the 26th day of the month The day is printed using one or two digits for example 3 for the 3rd day of the month and 26 for the 26th day of the month The hour is printed using two digits of the 24 hour clock for example 08 for 8 00 a m and 14 for 2 00 p m The hour is printed using one or two digits of the 24 hour clock for example 8 for 8 00 a m and 14 for 2 00 p m The minute is printed using two digits for example 02 for 8 02 a m and 48 for 2 48 p m The minute is printed using one or two digits for example 2 for 8 02 a m and 48 for 2 48 p m A counter value is printed by N digits which increases or decreases with each page Programmable digits of the counter is 5 and 8 and described as 05ud and O8ud respectively See the Relevant Image Scanner Specification des
143. t color profile Advance Front Adyance Front Image Mode 24bit Color Image Mode Grayscale ka Color Quality Color Gray Image Emphasis Bana None C De Screen Level 1 Emphasis High C De Screen Level 2 po E C Emphasis Mid De Screen Level 3 C Emphasis Low C De Screen Level 4 i Dropout Color Gren gt White Level Follower fauo a Reverse a Reverse Default Cancel Help Default i Cancel Help lt Image Mode Color selected gt lt Image Mode Grayscale selected gt Figure Advance dialog Quality Gray tab 63 Image Emphasis Color only None C De Scrmeen Level 1 Emphasis High C De Screen Level 2 Emphasis Mid C De Screen Level 3 Emphasis Low C De Screen Level 4 This option specifies the sharpness of a scanned image Select None De Screen or Emphasis None Edge processing is not performed Emphasis This option outputs an image with the edge emphasized Emphasis High Emphasis Mid or Emphasis Low can be selected If Emphasis High is selected the image becomes sharper If Emphasis Low is selected the image appears less distinct De Screen De Screen Level 1 De Screen Level 2 De Screen Level 3 or De Screen Level 4 can be selected This option eliminates moir s patterns To eliminate more effectively higher level is selected White Level Follower Color White Level Follower Jute Select this option to scan a docu
144. t 255 steps High light Shadow Gamma pattern 255 steps at Color Grayscale scanning Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern Change processing is done inside the driver This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 108 Image processing function Simplified Dynamic Threshold floating slice De Screen Edge emphasis Reverse 256 Color 8 Color Individual setting Disabled Interface SCSI I Preview Enabled at ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection Disabled Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Disabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled only when ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Enabled sRGB output Disabled Use Image Processing Software Option Enabled 109 Product Type Image sensor Operating method Light source Basic
145. t Shadow Gamma pattern 255 steps at Color Grayscale scanning 3 internal types can be downloaded This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 136 Image processing function Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction De Screen SEE Selectable Edge Enhancement Reverse 256 Color 8 Color With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation Individual setting Enabled Brightness Threshold Contrast High light Shadow Gamma pattern Image processing function Imprinter Endorser With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI II Preview Enabled at Flat bed scanning only Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram
146. t ADF gt Maximum 216 mm x 297 mm lt Flat Bed gt A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contrast 255 steps Individual setting Disabled In case of color or grayscale the firmware version of scanner has to be D00 or latter This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 116 High light Shadow 255 steps at Color Grayscale scanning Gamma pattern Internal types are not available Cannot be downloaded At custom specification entering a value enables to set a pattern Image processing function Simplified Dynamic Threshold SDTC De Screen Edge emphasis 256 Color 8 Color 4bit Grayscale Reverse Individual setting Disabled Interface SCSI II USB1 1 Preview Enabled at Flat bed scanning ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Dis
147. t items related to image processing The settings apply to device specific functions and items that differ according to whether the scanner used supports them The advance option specification 1s divided into Color Variance Image Processing and Auto Binary The supported options depend on the scanner See Relevant Image Scanner Specification in the Appendix is displayed for options that cannot be used The option dialog for this driver is explained below The commonly used buttons are explained first Default Default i Returns the setting to the initial value OK 0K Makes the new setting valid and closes the Advance dialog box Cancel Cancel i Makes the new setting invalid returns the setting to the previous value and terminates processing Help Help Displays online help 52 The options are described below 4 8 1 Gray Advance Front Image Mode Black amp white Static Threshold Gray Image Filter Gamma Gamma Pattern Normal E l Dropout Color iGreen Reverse Default Cancel Help Figure Advance dialog Gray Gamma Pattern Gamma Pattern Nor mal bg This option corrects distortions from nonlinear image representation Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document However most output terminals do not p
148. t of the MSG_XXXXxX response internally Cause This is a program error that usually occurs during internal message transfer This message involves the sub messages described later User response Contact the retail store where the product was purchased or the nearest service center A general fault of the DAT _XXXXX response internally Cause This is a program error that usually occurs during internal data 100 transfer This message involves the sub messages described later User response Contact the retail store where the product was purchased or the nearest maintenance service center A general fault of the DAT_XXXXX MSG_SET and unsupported type response Internally Cause This is a program error that usually occurs while making the internal data settings User response Contact the place of purchase or your nearest maintenance and service center An undefined error occurred Processing cannot be continued because of insufficient memory The data source cannot be found The driver is connected to a maximum number of applications supported An operation error occurred An invalid function is specified Unpermitted combination of MSG DG DAT An invalid value is specified An invalid procedure of DG DAT MSG is specified Cause These sub messages are added to the error messages General MSG_XXXXX response violation internal and General DAT_XXXXX violation internal These sub messages indicate details
149. te 150 dpi A4 80kg 45 screens per minute Maximum 100 sheets ream weight 80 kg A4 High quality paper Normal temperature and humidity Minimum 53 mm x 74 mm Maximum 297 mm x 432 mm A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Double Letter Letter Letter Landscape Legal US Executive US Executive Landscape Business Card Specified one location Disabled Brightness Threshold Contrast 255 steps High light Shadow Gamma pattern 255 steps at Color Grayscale scanning Custom only This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 126 Image processing function Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction De screen 256 color 8 color Abit Grayscale Reverse Individual setting Disabled Imprinter Endorser With Imprinter option Reverse side minimum left margin printing position of 5mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Font orientation Vertical Horizontal Bold font Enabled Interface Ultra SCSI USB 2 0 Preview Enable
150. ters For fine scan adjustments Since there is no fixed set of values set by trial and error Brightness Brightness Sets the brightness of the overall image Specify the brightness with a number in the range of 1 bright to 255 dark To darken the overall image increase the value of the setting To brighten the overall image decrease the value This parameter can be set if Halftone or Automatic Separation is selected for Image Mode Threshold Threshold Sets the threshold value by which the black and the white of black and white images are distinguished Specify a number in the range of 1 bright to 255 dark This parameter can be set only if Black amp White is specified for Image Mode In addition if DTC mode is selected the scanner will automatically use the appropriate threshold value As a result the set value cannot be changed If the light color in the scanned document is read as black increase the threshold value To eliminate light colored areas in the scanned document decrease this value Contrast Contrast a M Sets the contrast of light and shadow in a scanned image Specify the contrast with a number in the range of 1 low soft to 255 high sharp The contrast can be set if Gray Scale is selected in Image Mode If this value is increased the dark part of the image is shown darker and the light part is shown lighter Some scanner models do not support this functio
151. the application and the F1 key may be used differently in each application program Help information can be displayed by pressing the F1 key while holding down the Ctrl or Shift key Option Optiors Displays the option dialog for setting device specific functions See Section 4 7 Setting Option described later Advance Advance Displays the advance dialog for settings related to color variance and image processing Config Confie Displays the basic scan dialog for managing the settings file and for setting simple scan dialog switching About About Express the version of this driver by clicking this button 26 4 6 Setting Scanning Area Specify the scanning area in the preview window as follows Setting 1 Press the left mouse button to specify the origin top left corner of the scanning area The cursor appears as a 2 Drag the mouse to show the outline of the scanning area As the cursor moves a range frame 1s shown 3 Release the left mouse button again to set the range bottom right corner of the scanning area Movement 1 Move the cursor into the range frame The cursor appears as a hand 2 Press the left mouse button The cursor changes to a fist 3 Drag the mouse to move the range frame 4 Release the left mouse button to set the current range Cancellation The range frame can be canceled by either of th
152. tion Click on the button and the following screen will appear specify Area for Multi feed Detect Eg W Enable a Select area for applying Multi feed Detection q Select area for not applying Mult feed Detection Stark From the top of p document 0 Tja End From the top of 0 imm document Cancel Enable Detection Area Selection Vertically select an area where multifeed detection will or will not be conducted Choose either Select area for applying Multifeed Detection or Select area for not applying Multifeed Detction Select area for applying Multifeed Detection Select an area for multifeed detection Select area for not applying Multifeed Detection Select an area not to be detected Start Set start position as distance from the document s top edge Possible values 0 510mm with Start Position lt End Position End Set end position as distance from the document s top edge Possible values 0 510mm with Start Position lt End Position This button may not be displayed for some scanner models 88 About Power Control Button Enable Disable the scanner s power switch Power Control f Enable power switch Factory initial setting Disable power switch Cancel Enable Power Switch Scanner power switch is enabled The scanner can be turned ON OFF by the power button Disable Power Switch Scanner power switch is disabled The scanner wi
153. tion entering a value enables to set a pattern Simplified Dynamic Threshold SDTC De Screen Edge emphasis 256 Color 8 Color 4bit Grayscale Reverse This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 112 Individual setting Disabled Imprinter Endorser With Imprinter option Reverse side minimum left margin printing position of 5mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Font orientation Vertical Horizontal Bold font Enabled 1 Interface SCSI I USB1 1 2 0 Preview Enabled at ADF scanning Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection End of Page Detection Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Use Memory on Scanner function Enabled Batch Detection Disabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled when Ram cache or Use Both Memory is use
154. tion outputs an image with the edge emphasized Emphasis High Emphasis Mid or Emphasis Low can be selected If Emphasis High is selected the image becomes sharper If Emphasis Low is selected the image appears less distinct Mirror Mirror This option specifies whether to flip the scanned image over the scanning axis If this option is selected a mirror image of the original image is obtained Variance DTC Variance DTG Variance are ae Lowy Hight This option specifies the value for adjusting the dynamic threshold of an image based on the brightness of the image A value is specified using the slider The smaller the value the lower the variance becomes The higher the value the higher the variance becomes To specify the value drag the tab of the slider to the desired setting position The current setting is displayed on the right This option is mainly used for optical character recognition OCR It enables dark and bright images in a document to be scanned effectively Floating Slice Level SDTC Floating Slice LeveltF Low High Specifies the level of the binary processing done by the floating slice Set the level to higher when scanning documents with dark colored background This is displayed only when the SDTC mode Floating Slice is specified 57 4 8 3 DTC This option is valid only when DTC Variance is set Advance Front Image Mode Black amp White DTC mode Gray
155. tly using Explore or My computer 4 Click INSTALL PRODUCTS gt lt SETUP DISK START UP SCREEN gt FUJITSU Image Scanner Setup README FIRST INSTALL PRODUCTS USER S GUIDE BROWSE cD All Right Reserved Copyright C PFU LIMITED 1995 2003 Depending on the scanner model the different screen may appear 5 Click TWAIN Driver gt lt SETUP DISK START UP SCREEN gt INSTALL PRODUCTS TWAIN Driver Please choose an product to install ISIS Driver Image Processing Software Option Trial Scandal 21 we QuickScan PRO Trial Error Recovery Guide Depending on the scanner model the different screen may appear Depending on the scanner model the screen which confirms whether Error Recovery Guide is installed or not is displayed In this case click OK button and install Error Recovery Guide 6 Select the language you use in Choose Setup Language then click OK button x Select the language for this installation from the choices below Welcome to the InstallShield Wizard for Scanner Utility for Microsoft Windows The InstallShield Wizard will install Scanner Utility for Microsoft Windows on your computer To continue click Next 8 Read the information of README File and then click Next gt button Scanner Utility for Microsoft Windows Setup S x Information Please read the following text Please sc
156. to enter the scan conditions one at a time Press the J button to open the list of setting files Subsequent scanning operations can be performed effectively by registering several types of scan conditions that are frequently used 66 FTS File Information ceting File Information A File Name Fiw32ini Description gt Curent Setting Time Stamp 04 04 2003 11 01 20 4M Basic Resolution z 200 dpi Paper Size Leather 8 5 7 Tir Scanning Area Lett O 000 inch Top gt 0 000 inch Width gt 6 500 inch Length 11 000 inch i z a The information of the setting file selected in Setting Files is displayed Show this dialog next open checkbox Show this dialog next open If this checkbox is checked Basic Scan Dialog will be activated the next time the driver is activated OK button Makes the new setting valid closes this dialog box and returns to the main dialog Add button Add Adds the setting of the current driver to a setting file File addition Description Document 0i Filename config cael Pressing the Add button opens the File addition dialog Enter the Description and Filename as shown in the example above Then press the OK button to add the new setting file To cancel press the Cancel button Description Enter a character string to be displayed in the selection frame of the Setting Files Filename Specify the n
157. to continue Program Folders Scanner Utility for Microsoft Windows Existing Folders ae oa Priel ENE torte eth Scanner Utility for Microsoft Twig Yeu eer Windows InstallShield Usually it is not necessary to change the Program Folder s name 13 Click Next gt button and copying files is started Scanner Utility for Microsoft Windows Setup Start Copying Files Review settings before copying files Setup has enough information to start copying the program files If you want to review or change any settings click Back If you are satisfied with the settings click Next to begin copying files Current Settings User Information FUJITSU SCANNER USER 45S5 130404401 900000001 Target Directory C Program Files fitwain Program Folder Scanner Utility for Microsoft Windows InstallShield 14 Confirm the check boxes and then click Next button Scanner Utility for Microsoft Windows Setup gy xj Fujitsu Scanner Control Center This tool is to boot the specified application when the START button of the device is pressed V Boot the Fujitsu Scanner Control Center V Register the program in startup InstallShield i Cancel Usually it is not necessary to change check status When Boot the FUJITSU Scanner Control Center is checked Scanner Control Center is started after this installation is completed 1 When Register the
158. to replace consumables for replacement procedure of consumables Also see the Operator s guide of the scanner for how to replace consumables 107 9 Appendix 9 1 Relevant Image Scanner Specification Product M3091DC fi 4110C Type Desktop Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24bit output ADF scanning speed ADF paper chute capacity Document size Supported regular paper Scanning area specification White level follower Reduced optical system Automatic Document Feed ADF Simultaneous double sided scanning Fluorescent tube White 300 dpi 50 dpi to 600 dpi at steps of Idpi 8 bit 256 levels Enabled 8 bits Dither matrix can be downloaded Error diffusion Enabled B W Single sided 15 pages per minute 200 dpi A4 55 kg Double sided 7 5 pages per minute 200 dpi A4 55kg 15 screens per minute Color Single sided 5 pages per minute 150 dpi A4 55 kg Double sided 2 5 pages per minute 150 dpi A4 55kg 5 screens per minute Maximum 50 sheets A4 ream weight 55 kg High quality paper normal temperature and humidity Minimum 52mm x 74 mm Maximum 216 mm x 356 mm A4 A5 A5 Landscape A6 A6 Landscape B5 B6 B6 Landscape Letter Legal US Executive Name card Specified one location Disabled Brightness Threshold Contras
159. tomatic Size and Skew detection End of Page Detection Automatic Deskew Automatic Page Size Detection Black Background Overscan Enabled when Black Background is selected Buffer scan Use Memory on Scanner function Enabled Use Both Memory Ram Cache Use Memory on Scanner function Enabled Batch Detection Enabled Multifeed detection Enabled Check thickness length Pre Pick Disabled Check Over skew Enabled Blank page skip Enabled when Ram cache or Use Both Memory is used JPEG Transfer Hardware Compression Enabled Filter Page Edge Filler Digital Endorser Drop out color Enabled SRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled If 0 mm is specified as the endorser print position printing will begin 20 mm from the edge of the page The Automatic Deskew and Automatic Page Size Detection are not supported with color scanning Batch Detection can not be used with following Caching Use Memory on Scanner or Use Both Memory 2 147 Product M3099G M3099GX Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns ADF scanning speed Hopper capacity Document size Supported regular paper Cutout specification Background compensation Desktop Reduced optical
160. um left margin printing position of 20 mm Maximum number of characters to be printed 20 characters Counter display range 0 to 65535 5 digits display Direction Printing Top to Bottom SCSI II This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used If 0 mm is specified as the endorser print position printing will begin 20 mm from the edge of the page 150 Preview Disabled Flip Side Rotation Enabled Rotation Enabled Automatic Size and Skew detection Disabled Overscan Disabled Buffer scan Use Memory on Scanner function Disabled Use Both Memory Ram Cache Use Memory on Scanner function Disabled Batch Detection Enabled Multifeed detection Disabled Pre Pick Disabled Check Over skew Disabled Blank page skip Enabled when Ram cache is used JPEG Transfer Hardware Compression Disabled Filter Page Edge Filler Digital Endorser Drop out color Disabled sRGB output Disabled Use Image Processing Software Option Disabled Use of FUJITSU Scanner Control Center Disabled 151 Product Type Image sensor Operating method Light source Basic resolution Output resolution Grayscale levels internal Grayscale output Halftone Patterns Color 24b
161. uration of a custom size Up button Used for shifting the order of the selected document size upward Down button Used for shifting the order of the selected document size downward You can register up to three sizes as the customized document sizes 18 Custom Paper Size Setting window will appear when you click the Custom button Enter the size of the document to be scanned When entering the size specify the paper size by width x length to the scanning direction Some paper sizes may not be accepted by your device Refer to Relevant Image Scanner Specification in Appendix Custom Paper Size Setting Mame Document width a gt f m Length _ 200 mrm Cancel Help Name Enter the name of the customized setting to be displayed in the list Width Length To specify a custom paper size use the scroll bar or enter the paper size directly The unit specified in Option Generic Unit Scaling will be applied to the unit in this window Scanning Area Scanning Areal mm Left 0 Top 0 Width 216 Lenath 279 Specifies the start position width and length for the image scan The maximum allowable size is the paper size selected previously In addition the minimum size is 1 000 inch 26 millimeters or pixels number of dots per inch according to the unit that has been set Left The left end of the scan area on the scanned document X coordinate Top The top end of the scan a
162. ure and humidity Maximum 297 mm x 432 mm or Maximum 297mm x 1387 mm with Long Page Scanning Mode A3 A4 A4 Landscape A5 A5 Landscape A6 A6 Landscape B4 B5 B5 Landscape B6 B6 Landscape Letter Letter Landscape Double Letter Legal US Executive US Executive Landscape Specified one location Enabled Brightness Threshold Contrast 255 steps Gamma pattern Image processing function 3 internal types can be downloaded Simplified Dynamic Threshold SDTC Edge emphasis Edge extraction SEE Selectable Edge Enhancement Reverse With image processing option Dynamic Threshold DTC Smoothing Filtering Noise removal Automatic Separation This speed is only specified for the scanner itself The actual reading speed may vary depending on the system configuration Not all paper sizes can be used in all devices For details refer to the users manual for the device For other paper sizes the customer settings can be used 130 Individual setting Disabled Imprinter Endorser With imprinter option Reverse side minimum left margin printing position of 42 mm Maximum number of characters to be printed 40 characters Counter display range 0 to 99999 at 5 digits display O to 16777215 at 8 digits display Direction Printing Top to Bottom Bottom to Top Interface SCSI II Preview Enabled at Flat bed scanning only Flip Side Rotation Disabled Rotation Enabled Automatic Size and Skew detecti
163. utton control Image scan related data Figure Main Dialog 14 4 2 1 Linkage to Image Processing Software Option When the Enable Software IPC checkbox is marked after installation of Image Processing Software Option sold separately there appears setting items of Image Processing Software Option in a part of the Setting Window for TWAIN Driver ii TWAIN Driver 32 SIPC 0MB Browse Setting Files m Current Setting Config Resolution o Image Scanner fi 4530Cdj 100 i Scan Type 150 x 150 dE ADF Front Side Predefine dpi Paper Size ad A4 210x297mm x al Enable Software IPG Image Processine Filter A FIXED THRESHOLD NONE zi Threshold Scanning Area Left Top p Width Lengt P Dropout Color G 0 o reen am d S i i Preview Close Reset Option Help About TWAIN driver Press F1 key to show help Data Size about 65MB Setting items of Image Processing Software Option are displayed here You can change the settings of Image Processing Software Option here The Image Processing Software Option version 2 1 or later is required for settings on the window of TWAIN Driver For details about the Image Processing Software Option refer to the Image Processing Software Option User s Guide The following pages contain the explanation and operation description for each part 15 4 3 Displaying Driver Inform
164. y have been connected incorrectly Otherwise the OS may not recognize the scanner Make sure that the scanner power has been turned on and the cable has been connected correctly then retry rescanning Or check if the OS recognizes the scanner If the OS does not recognize it let it recognize the scanner then retry e Can not rescan the scanner Close the application using the driver and retry again Cause User response An attempt was made to rescan while the driver was in use It is impossible to rescan while the driver is in use Close the application that uses the driver and retry e Can not get the EEPROM data The setting of the function key can not change Check the connection of the scanner e Can not change the setting of the function key Check the connection of the scanner and try the operation again Cause User response While the scanner with function keys are being monitored the scanner power may be turned off or the cable may be connected incorrectly Make sure that the scanner power has been turned on and the cable has been connected correctly e It is not authorized to write into the folder which is installed FUJITSU Scanner Control Center Can not change the function of the function key Check the Access Authority of the folder which is installed FUJITSU Scanner Control Center Cause User response While the scanner with function keys are being monitored Access Authority may not have been

FUJITSU TWAIN 32 Scanner Driver

Contents

Download Pdf Manuals

Related Search

Related Contents