T4 Diagnostic System User Manual - Eng
Contents
1. amp INSTALLATION Testing LAN Card For units containing a correctly operating LAN card the message Present will be shown on the completion of the test If a LAN card is not included the message Not Present will be shown NOTE The LAN Local Area Network facility is intended for potential future developments in dealership systems and is not currently in use Checking for Parallel Device This test verifies the connection to a printer If no printer is connected a message Not Connected will be displayed If a printer is connected to T4 which is powered OFF and On line the message Connected will be displayed If a printer is connected to T4 and the message Off Line or Not Connected is displayed check the following e Is the printer On Line The indication light on the printer labelled On Line should be lit If not press the On Line button on the printer e lf the printer does not come on line try resetting the printer by turning it OFF then back ON Select BLACK or WHITE to TEST LCD DISPLAY e lf an error code appears on the printer refer to the User s Manual that was supplied with the printer for an explanation of the printer error message e Check the cable between T4 and the printer to make sure it is plugged in securely e Check the Configuration Module to make sure T4 is set up to use the printer The Configuration Screen can be accessed by selecting the2. Configuration option button on the Welcome Screen See Set Printer Paper in the T4 Configuration section of the on line details 65
3. Ta How to Interpret the Results of the T4 Integrity Tests A series of diagnostic tests can be performed to check the integrity of the T4 hardware The test results will be displayed after each test has been completed The different types of integrity test available are described below STIT0200 TestBook Integrity l Testing CD DG arrene PASS TESI LAN GOl s cc ca ma ae au ee ma ma ma aa mi oe m Not Present Checking for Parallel Device Off Line or Not Connected Test Successful Touch BLACK or WHITE to Test LCD Display Previous wow tor se we toe comme Testing CD Drive This test attempts to read from the Compact Disc that is currently loaded in the CD drive If the CD can be read successfully the display screen will show a PASSED message If the test fails and the CD cannot be read the message Fail or No CD Found will be displayed A CD read failure could be caused by one of the following conditions e There is no CD in the CD drive press the eject button to make sure e The CD has been inserted upside down in the CD drive Ensure the label side of the CD is face up e The CD is dirty or scratched see CD Cleaning Procedure e The CD is defective Try using another CD if it works replace the defective CD e The drive may be malfunctioning Check all the above and repeat the test for confirmation that there is a CD drive problem HARDWARE
Download Pdf Manuals
Related Search