Home

to view the file - Support On Line

1. 47 A2 10UJ 42 TD Messages General Environment TD messages are produced by the SORT MERGE facility This facility is used in the following circumstances e Use of SORT and MERGE utilities e Use of other utilities which activate the SORT facility for example the data base utilities DBANALYS and DBVALID e Use of SORT facilities via a programming language COBOL or GPL The execution error messages are produced as part of the Sort Report in a SYSOUT subfile see Appendix B The general format is as follows TDXX YY error message return code secondary information XX number of procedure giving rise to error YY error code within the procedure error message 1s a phrase that describes the diagnosis or error return code appears either with the abnormal execution of a system primitive or when there is an internal sort error secondary information appears when there is an I O error on the work file It allows the user to identify the completion code the device in use the address of the error presented as Cylinder Track EXAMPLE x SORT EXECUTION LISTING TD11 18 I O ERROR ON WORK FILE WKDISK READ RC 5F8B0481 gt TRID11 IOFAIL 42 1 Messages and Return Codes Directory TDOO TDO1 TDO1 TDO1 TDO1 42 2 00 01 02 03 04 COMPLETION CODE 8104 DEVICE NAME MS12 ADDRESS 380 x x SORT AUDIT I
2. The file cannot be physically extended No INCRSIZE or exhausted increments Recreate the file with a larger SIZE and INCRSIZE System file overload File violation The SBR file has been specified in the wrong format The format should be BFAS SEQ FB UFAS SEQ F or QUEUED MONOSUBFILE F Re allocate the SRB file using the appropriate format File working set overflow The SORT input file is too small for declared or actual number of input records Modify the JCL GCL command to supply a larger and or incrementable sort workfile Refer to the SORT report or the SORT subroutine Job Occurrence Report for advice on how to compute the SORT workfile size Transfer of Record Work file size limit reached Current record not processed Create larger work file Work file size limit reached The remaining records will not be processed Create a larger work file File label unknown in the volume The file label of the newest generation has not been found on the media of the oldest generation Check the volume contents Requested file unknown on this volume Modify the efn Due to an incorrect assign statement the file label is unreachable and the file cannot be opened Correct ASSIGN and or catalog description 47 A2 10UJ FLIDERR 1833 RWI FLIDMISS 1837 RWI FLNAV 0A06 IDS I Access Journalization Network Generation Physical I O Access Internal SORT MERGE Various I
3. Telecommunications entities not available Destination node saturated Destination mailbox not operable Mailbox saturated Destination node saturated Destination mailbox saturated Destination application saturated Requested space not allowed by Quota Control may be an uncataloged not temporary file or cataloged file without an owner on a quota controlled volume Quota control not available Function unbundled Report writer unbundled Sort unbundled Communications unbundled Table entry or queue is vacant Table entry or queue is not vacant Deadlock The object is resident so the operation should not be attempted Entity unknown Task unknown Mailphore unknown Console unknown Control variable unknown Run occurrence number unknown Job unknown External file name unknown Subfile name is unknown J number unknown Request unknown Command unknown Resource unknown Class unknown Type unknown File label unknown in the volume Scientific options unknown Emulator unknown Process unknown Global extent unknown Oldest generation unknown Label unknown Subcatalog unknown on volume Object unknown on volume Object unknown on volume 47 A2 10UJ 47 A2 10UJ 1019 101A 101B 101C 101D 101E 101F 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 102A 102B 102C 102D 102E 102F 1030 1031 1032 1033 1200 12FF 1201 1202 1203 1204 1205 1206 1207 1208 1209
4. Messages and Return Codes Directory Any File Any Operation Inconsistency between the actual file Organization organization and that declared in the COBOL SELECT clause COBOL RTP The organization described in the COBOL program for the file being opened does not correspond with the actual organization of the file Error Logging The organization and format parameters of a log file to be opened do not correspond to those of the file definition Verify and modify the parameters of the log file concerned SYS ERLOG SYS LOGC or SYS LOGF File Management File Space The file referenced by the efn parameter either Management has an incorrect file organization or does not Utilities support file extension Check the file organization using FILLIST File Storage and Wrong FILEORG or FILEFORM parameters Tape Handling Allocate FORMS The specified form leads you to reference a subfile which is not of type FRM GAC and GAC GAC has been specified for a file which is not a EXTENDED UFAS file Network Generation The file literal specified in the SAVE or LOAD parameter of the CRNETGEN command does not correspond to a library Correct CRNETGEN and run it again OMH Cataloged The catalog format has been specified Messages incorrectly PASCAL RTP Various The organization of a file is incompatible with Operations the type of processing required RBF OPEN Protocol not implemented TDS Attempt to open a TDS controlled file that
5. Messages and Return Codes Directory H200CNL 0050 005CLast crossed channel number with form limit crossing over H200CNLO 0050 No VFU with FORMLIM H200CNL1 0051 Channel number 1 with FORMLIM H200CNL2 0052 Channel number 2 with FORMLIM H200CNL3 0053 Channel number 3 with FORMLIM H200CNL4 0054 Channel number 4 with FORMLIM H200CNL5 0055 Channel number 5 with FORMLIM H200CNL6 0056 Channel number 6 with FORMLIM H200CNL7 0057 Channel number 7 with FORMLIM H200CNL8 0058 Channel number 8 with FORMLIM H200CNL9 0059 Channel number 9 with FORMLIM H200CNLA 005A Channel number 10 with FORMLIM H200CNLB 005B Channel number 11 with FORMLIM H200CNLC 005C Channel number 12 with FORMLIM HARDMALF 04C7 Hardware malfunction HEADERR 1025 Wrong header GTWriter There is an error in the input file header The form and skip orders are incompatible The current output is halted UFAS and UFAS The wrong block has been read EXTENDED Unit Record Driver WRITE Incorrect DOF SSF ASA header The driver has Printer transformed the header into a single space line The line is printed but may be out of place on the page Incorrect SSF header MBZ field not respected 52 28 47 A2 10UJ HYVIOL IDELERR IDERR IDXNSTBL IFNASG IFNDEF 47 A2 10UJ 1401 DATANAYV to IOFAIL Return Codes Hierarchy access violation GPL Start Task or Wait Process in execution not the main one For End of Task System Nucleus Task M
6. 47 A2 10UJ EX Messages ILLEGAL SEMAPHORE TYPE Attempt to perform an operation reserved for semaphore with message on a semaphore without message SEMAPHORE COUNT OUT OF RANGE Too many events are pending on the semaphore increase the semaphore maximum count ACCESS OUT OF SEGMENT BOUNDS In COBOL may appear when the SUBOPT option has been used In GPL usually due to misuse of based variables and pointers ILLEGAL SEGMENT NUMBER The STE value is greater than the maximum segment number in the segment table In GPL this is usually due to an illegal pointer value UNAVAILABLE SEGMENT The STE value does not correspond to a valid segment in the segment table in GPL this is usually due to an illegal pointer value ILLEGAL SEGMENT TABLE NUMBER The STN value does not correspond to a valid segment table in GPL this is usually due to an illegal pointer value ILLEGAL DECIMAL DATA Non decimal data is involved in a decimal operation Refer to the COBOL 85 User s Guide ILLEGAL DATA LENGTH A bit string operand is greater than 64 bits or a decimal operand is greater than 31 digits ILLEGAL DATA DESCRIPTOR The data descriptor used is invalid ILLEGAL OPERATION CODE May appear in GPL during the execution of a SELECT instruction when an OTHERWISE clause has not been specified and no unit has been selected ILLEGAL BRANCH The name of a TPR is the same as that of a file or an item of shared data 16 3 Message
7. DIRECTORY SALVAGING ABORTED Meaning An access method error or an I O failure during directory salvaging Result The file is left unstable and cannot be accessed Action Restore the file from a previous save DIRECTORY SALVAGING COMPLETED Meaning The directory has been salvaged Result The directory can be accessed Action None DIRECTORY SALVAGING Meaning The first message sent by Directory Salvaging Result The directory will be recovered Action None UNABLE TO WRITE DIRECTORY BLOCK NUMBER lt blk_number gt Meaning An I O error occurred while writing the directory block number lt blk_number gt Result The file is left unstable and cannot be accessed Action Restore the file from a previous save UNABLE TO ACCESS DIRECTORY BLOCK NUMBER lt blk_number gt Meaning An I O error occurred while accessing the directory block number lt blk_number gt Result The file is left unstable and cannot be accessed Action Restore the file from a previous save ENTRY NAME lt entry_ name gt Meaning Indicates the name of the current subfile Action Depends on the following messages UNABLE TO ACCESS A BLOCK OF BAM END OF SALVAGING Meaning An I O error on the bam block Result Salvaging cannot be performed 47 A2 10UJ QL50 QL53 QL54 QL59 QL60 QL61 47 A2 10UJ QL Messages Action Restore the file from a previous save FATAL I O ERROR ON DIRECTORY OR BAM B
8. JBOO code JB03 code JB09 00 JB10 01 47 A2 10UJ 23 JB Messages General Environment JB messages are produced by the Job Management component of the system responsible for sequencing of jobs and job steps Pertinent Manuals IGE Reference Manual viz ceesttscpisvenai stig tete wii ae hea van EA 47 A2 IIUJ ICL Oser AE T AIOE AEN ET EAE EAS EE A E AT 47 A2 12UJ Message Descriptions Meaning System error The code gives the detailed reason for the error The code will be between 00 and 04 inclusive Action Contact the Service Center Meaning System error while accessing JCL in translated format The code gives the detailed reason for the error It will be from 00 to 03 inclusive Action Contact the Service Center Meaning System error Indicates that a request to the timer cannot be deleted A following message JB40 may appear in the JOR and should be ignored Action Contact the Service Center Meaning System error while accessing a pre initialized load module 23 1 Messages and Return Codes Directory JB11 JB14 JB14 JB15 JB20 JB30 23 2 Action Contact the Service Center WRJOR LIMIT OVERFLOW Meaning The maximum number of user messages allowed in the JOR was reached This limit is defined at CONFIG time Result The user messages which follow are lost but the system messages are still printed in the JOR The job processing is not affected STEP HA
9. 47 A2 10UJ 47 7 Messages and Return Codes Directory TX47 TX48 TX49 TX50 TX51 TX52 TX53 TX54 TX55 TX56 TX57 TX58 TX59 47 8 RM_IDENT CNCT SES RESYNC START rmident cnet ses resync start Response to DISPLAY TDS XA RM STAT 1 NO XA RM YET CONNECTED Response to DISPLAY_TDS_ XA RM_STAT 1 instead of TX47 and TX48 TDS tds COLD RESTART IS PERFORMED STARTED WITH MASTER MAILBOX mbx STARTED YOU ARE MASTER TERMINAL OPERATOR WARM RESTART IS PERFORMED Startup message w w w w cornm DISCONNECTED FROM coraddr TDS tds Unsolicited message Perhaps a response to the CANCEL_TDS CTC cmdnm COMMAND NOT PERFORMED INVALID UNKNOWN TX txnm Response to DTX or MDTX TDS tdsname SHUTDOWN Shutdown message after TTDS TDS tdsname cmdnm COMMAND COMPLETED Response to normal execution TDS tdsname cmdnm COMMAND NOT PERFORMED rc Command has failed to execute Check the return code and the sicid cmdnm UNKNOWN OR NO MATCHING OBJECT objnm WRONG TYPE OF CORRESPONDENT Response to commands which deal with correspondents cmdnm SCROLLING UP MORE ENTER Y N Startup message or response to some list or display commands OVERFLOW ON PMOS COMMAND RESPONSES QUEUE ONLY ONE PROGRAMMED OPERATOR ALLOWED TO CONTROL TDS Response occurs when several programmed operators try accessing a TDS application 47 A2 10UJ TX60 TX61 TX62
10. Action Contact your supplier 47 A2 10UJ 3 1 Messages and Return Codes Directory Binder4 ABNORMAL RETURN CODE FROM SPACE MANAGER RC edited return code Meaning Abnormal internal processing Result The bind is not performed Action Contact your supplier Binder6 ABNORMAL OPENS OF SYSOUT SUBFILE RC edited return code Meaning Binder failed to open the report subfile in the library specified by a PRTLIB parameter The reason is given in the return code Result The bind is not performed Action Contact the Service Center Binder7 ABNORMAL CLOSES OF SYSOUT SUBFILE RC edited return code Meaning Binder failed to close the report subfile The reason is given in the return code Result The bind is performed Action Contact the Service Center Binder8 UNABLE TO CHANGE NAME OF SYSOUT SUBFILE H_BIN_OUT RC 3 2 edited return code Meaning Binder failed to give the report subfile its final name The reason is given in the return code The report is available in the subfile H_BIN_OUT of the library specified in the PRTLIB parameter Result The bind is performed 47 A2 10UJ 4 CBL Messages General Environment CBL messages are produced when COBOL facilities are used Messages CBL01 to CBL06 are output by the COBOL Compiler Messages CBL11 to CBL23 are output during the execution of a COBOL program Pertinent Manuals COBOL 85 Reference Manual 47 A2
11. e The assigned file is involved in a set of concatenated files e The CONFIG option see SITEOPT parameter is not if no media list then use WORK tapes Result This error is detected at step initiation time the step cannot be started Action Check the JCL 47 A2 10UJ 10 7 Messages and Return Codes Directory DF48 DF49 DF50 DF59 DF60 DF61 10 8 efn efn efn efn efn efn INVALID SHARE SPECIFICATION Meaning Issued during an ASSIGN when the value of the SHARE parameter is invalid or during assignment refer to the GCL commands MWLIB or MWINLIB with SHARE not equal to DIR Alternatively there is an inconsistency between SHARE and device type Result Error detected at step initiation time the step cannot be started Error detected also when performing GCL MWLIB or MWINLIB commands Action Check SHARE parameter INVALID FILESTAT SPECIFICATION Meaning Issued during an ASSIGN with invalid FILESTAT parameter Result This error is detected at step initiation time the step cannot be started Action Check FILESTAT parameter INVALID ACCESS SPECIFICATION Meaning Issued during an ASSIGN with invalid ACCESS parameter Result This error is detected at step initiation time the step cannot be started Action Check ACCESS parameter CANNOT BE LOCKED RC edited return code Meaning Issued during an ASSIGN on coupled systems when the file currently assigned cannot
12. 53 38 Save and Restore Collector Collector Abnormal termination of the channel program of Set Function Mask on tape Switch tape drive to STANDBY and then to READY Abnormal I O termination Tape must be repositioned Put into the ready State 1 Repositioning needed following the loss of a block BSN error an excessive number of read or write errors or use of the tape unit in STANDBY mode for tape 2 Unrecoverable I O after channel exception all other types of devices Request overload Request unknown Unknown request An attempt has been made to restore a volume on an output resident or shared volume This is forbidden A system error has occurred Contact the Service Center An unknown request has been received Contact the Service Center The request identifier given in the Trace message is not correct If this message persists stop and restart the collector The object is resident so the operation should not be attempted 47 A2 10UJ RETURN CODE 54 RESNAV to YETALLOC Return Codes This section lists the RESNAV to YETALLOC return codes in alphabetical order of the return code s name mnemonic code Each return code is presented with its name associated hexadecimal value and a generic explanation of its meaning The line following that gives the associated COBOL Status Key value if it exists Here is how this section presents the return codes Hexadecimal value Ge
13. 54 25 Messages and Return Codes Directory UABORT UBUGERR UFASPATH UFATERR 54 26 Availability Control GCL Network Generation PASCAL RTP System Nucleus TDS 04CA GCL 186B TDS VCAM ISO 00B5 186A File Management TDS GAGS Messages Get System Semaphore VMM Master Command TPR Operation Save and Restore TPR Operation Physical type unknown During the allocation of a GCL variable an inconsistent data type has been discovered Modify the value assigned to the variable The type of server is invalid Check the compatibility between the NAME and TYPE of the server then try the command again The type of data read does not correspond to the type of its receiving variable Erroneous semaphore type either 0 or 2 Attempt to perform an action on a type 0 segment from a ring 2 3 or an invalid type of object specified in the argument Wrong type of correspondent TM XCP1 XCP2 etc The function requested is not valid for the type of correspondent specified Check the correspondent s name Abort requested by user The user program has been aborted due to an abnormal condition User bug error in a job IDS II user error Refer to the JOR or TPR trace The ISO session encountered a problem when notifying Use the User VCAM Trace to analyze the problem Check the validity of semaphore structures The item belongs to a UFAS path User fat
14. Action Contact the Service Center if necessary ifn COMPACTION NOT SUPPORTED FOR RECORD FORMAT UNDEFINED Meaning The data record compaction is not supported for records with format undefined This problem should not normally arise with a user file Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary 47 A2 10UJ SQ07 IFN soos IFN sQog IFN 47 A2 10UJ SQ Messages ifn BLOCKSIZE SHOULD BE gt TO RECSIZE 4 V VB Meaning The block size is not compatible with the record size according to the format of the records V VB at least 4 bytes more than the record size must be reserved in the block to build the record header Result The file cannot be opened An abnormal return code is set by the access method Action This type of message is related to checking the consistency of file characteristics Remember that these characteristics are provided as follows e in the file label when the file already exists and the file label contains this information in this case the file label is inconsistent e in the file description of the program or in a JCL statement DEFINE when either the file is to be allocated by the step execution or when the file already exists but the file label does not contain these characteristics DOS VS files in this case a correct value must be specified either by modifying the
15. COBOL Program Execution 47 A2 10UJ RESNAV to YETALLOC Return Codes Overflow in the Program Checkout Facility working area Reduce the number of commands or the number of action points during the Program Checkout Facility session VMM User program instrumentation mode MAXMEM option specified in JCL amount of memory specified in JCL SIZE statement is too small Dynamic Checkpoint save area is too small Modify the Addresser user code Generally More than 608 output files specified for a job or an error occurred when accessing the output file Requested space not allowed by Quota Control may be an uncataloged non temporary file or a cataloged file without an owner on a Quota controlled volume Internal splitting WRITE A record insertion causes a CI to be split or compacted so some simple file relative addresses SFRAs will change Normal return code Space not accounted by Quota Control volume is not a quota controlled volume Negative number to power is ambiguous Result gt 10 252 overflow power ARG less than 200 underflow Zero to negative power is undefined Temporary quota exceeded for the project s session Search failure COBOL Status Key value 30 SEARCH Record not found during SEARCH ON KEY operation Probably part of file lost due to a disk hardware fault 54 15 Messages and Return Codes Directory File Management Save and Restore SRTUNBUN OAE2 SORT MERGE SSIHOV 1469 SSNCPR
16. DVMGT 27 IDERR DVMGT 28 TPUNKN Cancellation of reservation of a pool of devices has not been performed because of a user error or because the request is irrelevant There is no device to be deallocated in the pool The disk is non removable Incomplete device attributes for a cartridge on a multi model site model name is missing System error while reserving a device Damaged system tables The reservation of a pool of devices has not been performed because of a system or user error or because it is not possible Device is not available at the moment A job requested more devices than are available in the configuration User error in specification of the request Incomplete device attributes for a cartridge on a multi model site model name is missing Damaged system tables The reservation of a pool of devices has not been performed because it is not currently possible and for static reservation only the job that requested it has been enqueued Not enough devices available in the configuration for the requested class device held or already reserved System error while translating a device class Device class translation not possible The string cannot be translated due to a syntax error For printers the given number of hammers is different from 120 132 136 or 160 The given device class does not exist in the configuration The string corresponds to a correct descript
17. FP12 FP13 FP14 FP15 17 4 SYSTEM I O ERROR ON VOLUME volname IN H CLOSE FOR IFN ifn EFN efn Meaning System error An irrecoverable operation while accessing the SYS KNODET file Action Contact the Service Center Check the file involved in the step SYSTEM I O ERROR IN H_CLOSEV FOR IFN ifn Meaning System error An irrecoverable I O error has been encountered during a close volume operation while accessing the SYS KNODET file NO EOV LABEL WRITTEN ON VOLUME volname FOR IFN ifn EFN efn Meaning Applies to magnetic tapes only An irrecoverable I O error has been encountered during the close of the specified volume Result No end of volume labels have been written on the volume VOLUME LIST BEGINS WITH VSEQN volume sequence number FOR IFN ifn EFN efn Meaning Warning message indicating that the first volume specified in the volume list for a file is not the first volume of the file Result If FIRSTVOL 1 was specified in the ASSIGN JCL statement the file cannot be opened the abnormal return code SEQERR is set If no FIRSTVOL parameter was specified the file is accessed starting on the first volume indicated in the volume list Action If no partial processing of a multivolume file is desired add the parameter FIRSTVOL 1 in the ASSIGN statement so that File Management checks that the first volume given in the media list is the first volume of the file SYSTEM I O ERROR IN
18. Meaning This is an information message which informs the operator that the STOP literal statement has been executed A message to this effect is also output to the JOR Action None CBL18 IFN ifn RC edited return code AT ADDRESS lt address program name gt ILN internal line KLN external line Meaning An abnormal return code is returned to the program and a recovery procedure was defined by the system as a result of a data management operation on a file whose name is given in the message The message gives the name of the program and the segmented address from where the data management operation has been called If the program has been compiled using the DEBUG option the source line numbers of the involved statement as they appear in the program listing are also given Result Relevant to the individual incident or if an error recovery procedure was defined within the program CBL19 IFN ifn CONTROL RECORD 101 TRUNCATED Meaning The file was created in SFF format therefore the system automatically adds a special record named control record 101 at the beginning of the file This record gathers various control information and the size of the record is usually 79 bytes The message warns the user that the control record 101 has been truncated because the maximum record size of the file is less than 79 bytes Result Execution proceeds The file can be re read by a user program However some trouble may arise when the file is
19. Physical I O Access Internal 1465 Any File Organization Queued Files Load Module Loader Loader VMM Load Module Loader Message Management Messages Loader VMM Load Module Loader Memory to be Unlocked OPEN An incorrect STE has been attributed to a segment Reserved for ENTRY segments Link the load module again with the correct options for the segment Internal system error Contact the Service Center The specified segment does not exist Contact the Service Center Segment size would exceed maximum size The PGCS is greater than 64K which could be caused by a private PECT which is too large Link the load module again with a smaller PECT Mailbox overflow or message too large Too many objects have been locked in WITH statements or passed to procedures with the keyword VAR Some linker structures are greater than the maximum permissible size Contact the Service Center A segment size has been specified which is too short INTO or SEGLIST options Segment type error During the loading of a load module an error has been found in the segment table This may be due to an incorrect STN number Link the load module again with the correct options Segment type error the sharing level is equal to 3 or the segment is a large segment Large segments may be deleted if and only if no channel program referencing a buffer has been defined up to this point Sha
20. Record not found or deleted COBOL Status Key value 23 All File Organizations READ START REWRITE DELETE Catalog Management DELETE CATLIST Dump Analyzer File Management Save and Restore FORMS READ Journalization The record at the relative address given is deleted or does not exist If this is not expected correct the program The record to be deleted cannot be found 1 No object exists beyond this node normal return code 2 No more relations exist normal return code The data requested was not found in the DPAN file The number of physical blocks found on a track do not match with the number specified to the file organization Real I O error or system error Dump the track concerned and contact the Service Center The specified form was not found Check the library search rules the name of the form in the forms structure that the form was generated for the current device At rerun the first record to roll back was not found Send the PRLOG log to the Service Center 47 A2 10UJ RWI Unit Record Driver GET Diskette RECSZERR 185F BFAS Sequential OPEN Disk Files Common Code Generator File Management System Disk SBR Collector Unit Record Driver GET Diskette OPEN REJCT 1710 171F RELOC 0014 Unit Record Driver GET Diskette RELTPERR 186D RELUNKN 101A 47 A2 10UJ IONOP to RESIDENT Return Codes Record not found A physical record could not be found
21. TDO2 04 TDO2 05 TDO2 06 TDO2 07 TDO2 08 47 A2 10UJ TD Messages RECOMPILE AND RELINK COBOL PROGRAM IF YOU WANT UP TO DATE DISK SORT Meaning The merge Sort is used instead of the distribution Sort in this case This is only a warning ABOVE CHARACTER ALREADY MENTIONED IN USER COLLATING SEQUENCE Meaning The collating sequence is incorrect Action Correct the sort DSL SEPARATOR MISSING Action The option string or DSL Data Services Language must be corrected Each error is underlined by a MISSING AFTER PRECEDING KEY WORD Action The option string or DSL Data Services Language must be corrected Each error is underlined by a FUNCTION PARAGRAPH MISSING Action The DSL Data Services Language must be corrected Each error is underlined by a RECORD PARAGRAPH MISSING Action The DSL Data Services Language must be corrected Each error is underlined by a ABOVE KEY WORD IS OUT OF CONTEXT IN FUNCTION PARAGRAPH RECORD PARAGRAPH INSERTED Action The DSL Data Services Language must be corrected Each error is underlined by a ABOVE KEY WORD IS OUT OF CONTEXT IN RECORD PARAGRAPH FUNCTION PARAGRAPH INSERTED Action The DSL Data Services Language must be corrected Each error is underlined by a ILLEGAL CHARACTER S IGNORED Action The option string or DSL Data Services Language must be corrected Each error is underlined by a 42 7 Messages and Return Code
22. The file specified by the efn parameter has been partly extended Check for free space in the given list of volumes 1 An error has been found in a named field The selection vector indicates the field s in error Check the contents 2 An error has been detected page or line skipping Abnormal I O termination No jobs introduced except current job No action required Message received but at least one message in the queue lost due to I O error Operation is not complete A new call to the telecommunications dictionary is needed because the interface structure is full This is not an error so no action is needed Site shutdown requested Expansion of tabulations would cause overflow of output string concealed part contains spaces only The current value entered is already a current value Use the DDIM command to ascertain the current values Check the operator message Task Management Wait on semaphore is performed but RI or ITS 47 A2 10UJ to procedure to be called is erroneous Messages and Return Codes Directory System Output ALREADY 0012 Any File Organization Catalog Management COBOL Dump Analyzer File Management IDS II IOF OMH RBF RWI System Nucleus 51 8 VMM All segments cannot be loaded together or a large segment has been referenced by a small segment descriptor No action required Segment resource overflow when listing outputs Contact the Service Cente
23. e Return Code EFNUNKN the specified library has not been found e Return Code UNRECIO the disk pack or drive supporting the library may be damaged Result Processing stops No unit is processed Action Correct the JCL if relevant or contact the Service Center RFLDEF FOR PRTLIB OR OUTFILE RC edited_return_code Meaning There is a problem of file management for the report library specified by the PRTLIB parameter The return code indicates the reason Result Processing stops No unit is processed Action Contact the Service Center DFLDEF FOR PRTLIB OR OUTFILE RC edited_return_code Meaning There is a problem of file management for the report library specified by the PRTLIB parameter The return code indicates the reason Result Processing stops No unit is processed Action Contact the Service Center TYPE OF PRTLIB SHOULD BE SL Meaning The report library specified by the PRTLIB parameter is not a source library Result Processing stops No unit is processed Action Check the library name specified by the PRTLIB parameter CLOSE SYSOUT RC edited_return_code Meaning MACPROC was unable to close the standard SYSOUT file containing the report The return code indicates the reason Such an incident is very unusual and may be due to a system error Result This incident can only occur at the end of processing when all output units have already been produced The listings may be accessible and printed successfull
24. 47 A2 10UJ DU94 DU Messages SERVER TERMINATION RUNNING BYPASS POP SERVER TERMINATION RUNNING BYPASS VOP DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 47 A2 10UJ Meaning Synchronization instructions are bypassed when the TERMINATE operation is running It may be after a TDYNSVR GCL command normal or after an abort of the dynamic save server abnormal TWO DYNAMIC SAVE ON THE SAME FILE Meaning You have tried to save the same file twice at the same time TWO DYNAMIC SAVE ON THE SAME FILES nnnnn Meaning You have tried to save the same file twice at the same time nnnnn is the index of concerned file in a dynamic save list for files set only ABNORMAL RC CREATE CU_CINB SEG Return code Meaning Internal error ABNORMAL INITIAL STATE OF CU FRU Return code Meaning Internal error ABNORMAL RC CREATE FREE RWINB POOL SEG Return code Meaning Internal error ABNORMAL RC CREATE BITMAP ROOT SEG Return code Meaning Internal error ABNORMAL RC CREATE GIM CACHE CICA SEG Return code Meaning Internal error ABNORMAL WORKFILE RWI SESSION OPEN Return code Meaning Internal error ABNORMAL OPEN OF GIM INDEX XCBWAIT Return code Meaning Internal error ABNORMAL OPEN OF GIM INDEX XCBSAVE Return code Meaning Internal error C1 AND C2 SWITCHES TOGETHER SET Meaning Internal error 12 9 Messages and Return Codes Directory DU
25. 50 12 47 A2 10UJ 51 ABNCCAD to DATALOSS Return Codes This section lists the ABNCCAD to DATALOSS return codes in alphabetical order of the return code s name mnemonic code Each return code is presented with its name associated hexadecimal value and a generic explanation of its meaning The line following that gives the associated COBOL Status Key value if it exists Here is how this section presents the return codes RETURN CODE Hexadecimal value Generic explanation COBOL Status Key value If a return code is explained in more detail for a particular system component this information is given after the generic explanation There are three columns of information as follows System Component Operation Explanation or Cause The first column System Component gives the name of a system component or utility program from which a return code may have originated for example TDS File Management Unit Record Driver BFAS Sequential Disk File Handling If you want more information about a particular part of the system consult the appropriate user s manual In general the user cannot directly access entries marked internal or system The second column Operation contains entries for the operation e g COBOL verbs Transaction Processing Routine commands performed within the corresponding system component of the first column The third column gives an explanation of the return code and recommended action
26. ABTVIOL 1620 ACCTUNKN 101C ACSSVIOL 1400 16FF System Nucleus ACTIVECU 1407 System Nucleus ACTIVVMA 1706 51 4 Abort violation Account unknown on volume Access violation Dynamic Addresser CU which is object of CANCEL is not COBOL Commitment Unit already active Dynamic Addresser CANCEL COBOL error A procedure cannot cancel itself Modify the user code Deletion forbidden for active VMM area 47 A2 10UJ ADDRERR 1819 Any File Organization Generally IOF Journalization OMH Queued Files System Nucleus Unit Record Driver Diskette VCAM ISO 47 A2 10UJ ABNCCAD to DATALOSS Return Codes Address error Any I O Operation A physical address is erroneous Send a trace Any CPU Operation Command Management OPENS VMM GET and log to the Service Center A CPU address is erroneous Invalid parameter s given by PUTIOF GETIOF ASKIOF or SENDO macro Verify the parameters The logical address of a block in the journal is erroneous Send the PRLOG log and UFAS trace to the Service Center The current command cannot be processed as the component which is to process the command cannot be called Address given by INADDR is erroneous 1 An address specified in the segment is bigger than the segment size 2 The Page Table Area Control Entry PTACE cannot be released 3 The address of a page in backing store has been specified incorrectly or the page has a
27. Action Contact the Service Center UNABLE TO DEACTIVATE WORK_STATION VCAM ERROR CODES WSSTAT wsstat Meaning Software error Action Contact the Service Center UNABLE TO FREE SEMAPHORE RC return code Meaning Software error Action Contact the Service Center 47 A2 10UJ PTO8 PTO9 PT10 PT11 PT12 PT13 PT14 47 A2 10UJ PT Messages CONNECTION REJECTED STATUS ABNREJECT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Abnormal rejection Action Refer to the VCAM error codes CONNECTION REJECTED STATUS DNODENOP VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Destination node not operable Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED STATUS DNODESTST VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Destination node saturated Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED MAILBOX UNKNOWN Meaning Remote application is not known on the remote site Action None CONNECTION REJECTED MAILBOX NOT OPERABLE Meaning Destination mailbox not operable Action Check the status of the remote network system CONNECTION REJECTED MAILBOX SATURATED Meaning Destination mailbox saturated Action Check the status of the remote network system CONNECTION REJECTED APPL REJECT Meaning
28. CULIB NO OBJECT CODE PRODUCED RC edited return code Meaning The PASCAL compiler failed to open the library where the produced objects should be stored The reason is indicated by the return code Such a message is very unusual when a temporary CU library is used When a permanent CU library is used the most common return code is EFNUNKN indicating that the library specified in the CULIB parameter of the JCL statement PASCAL has not been found on the specified volume Result The compiler continues processing but it will not generate any CU Action Correct the JCL if relevant or contact the Service Center BUILD INLIB RC edited return code Meaning A problem occurred when the compiler attempted to retrieve source member names from the input library The reason is indicated by the return code Result No further compilation is performed Action Report the problem to the Service Center OPENS INLIB FOR member name Meaning An incident which may be due to a system error occurred when the compiler attempted to access a source member from the input library The reason is indicated by the return code 47 A2 10UJ PAS Messages Result The compilation is aborted Action Report the problem to the Service Center PASO7 OPENS PRTLIB FOR proc name_L LISTING WILL BE ON SYSOUT Meaning An incident which may be due to a system error occurred when the compiler attempted to create the member to receive
29. File Management GAC and GAC EXTENDED Generally record Parameter value is incompatible with another parameter value COBOL Status Key value 9J Assignment of File Volume or Device File Storage and Tape Handling TDS Interface The commands of the utility are erroneous Check your JCL against utility specifications The permanent file attributes declared in the program for the external file being opened contradict the permanent file attributes for the same file in another program of the same run unit Wrong or conflicting input parameters for current operation Correct program There is a conflict between file organization parameters or all volumes of the given media list do not have the same characteristics organization mirror status There is an anomaly in the GAC TDS interface TDS reinitialization generally takes place Commitment Unit Before Journal not allowed or write with Management deferred update not allowed Resource Locking The access request is incompatible with the OPEN CLOSE Any Operation access mode of the file An error has occurred in the GAC_AM_FIMA interface The number of sequence control blocks is greater than 255 Incompatibility between ASSIGN parameter s and label contents Refer to the JOR for possible complementary messages 47 A2 10UJ COPYERR 47 A2 10UJ File Organizations Other Than UFAS FORMS Job Management MCS OMH
30. IFN IFN IFN ifn MONITOR SHARING NOT SUPPORTED ONLY DIR OR NORMAL ALLOWED Meaning GAC is not available for libraries thus an option SHARE MONITOR found either in the JCL ASSIGN or in the catalog entry when the file is cataloged is illegal Result The file cannot be opened Action Correct the JCL ASSIGN statement or modify the catalog entry ifn AT LEAST ONE LINK ALIAS TO ALIAS HAS BEEN DELETED Meaning During File Salvaging or the operation of FILCHECK some links that are internal to the access method have been deleted Result The file is coherent Action None ifn UNABLE TO WRITE TO DATA BLOCK NUMBER n Meaning An I O error has occurred while writing to a data block Result The subfile is truncated at the previous block ifn UNABLE TO ACCESS TO DATA BLOCK NUMBER n Meaning An I O error has occurred while reading a data block Result The subfile is truncated at the end of the previous block ifn SUBFILE HAS BEEN BOUNDED Meaning The current data block contains errors The subfile is truncated at the end of the previous block Result Some data may be lost ifn DIRECTORY SALVAGING TERMINATED Meaning During the File Salvaging process directory salvaging has terminated abnormally due to an error previously given in an error message Result The file is unstable Action Look at the return code given in the error message Contact the Service Center ifn DIRECTORY SALVAGING COMPLETED
31. Journalization System Trace 47 A2 10UJ IONOP to RESIDENT Return Codes No current record COBOL Status Key value 23 READ REWRITE DELETE DELETE REWRITE Statements Restore GET PUT Operation rejected because no current record exists Correct program No current record exists Record already updated or deleted Previous operation should have been a successful READ Sequential mode Statement issued for a multi logical unit file and the last I O statement was not a successful READ statement Processing cannot continue because the save file is a multivolume tape file and the given media list is not complete Processing cannot continue because of incident Diskette address not given The item is a node item Record deletion not allowed COBOL Status Key value 90 DELETE Access GET Deletion of record not permitted for current file Error during an ERASE statement A physically deleted sector met in a file where forbidden Object has no lower level Attempt to operate a non initiated object Attempt to execute a Report Writer statement when the report involved is not in the initiated state Report Writer The RWI session was not opened to journalize the step Collector The collector cannot be initialized The action to be taken depends on the error message 53 15 Messages and Return Codes Directory TDS Transaction Network Subsystem UFAS EXTENDED NOLOCK 1c06 H LOCK H
32. Meaning The directory salvaging part of the File Salvaging process is complete Result Salvaging continues 47 A2 10UJ QL37 QL38 QL39 QL40 QL44 QL45 QL48 47 A2 10UJ IFN IFN IFN IFN IFN IFN IFN QL Messages ifn UNABLE TO WRITE DIRECTORY BLOCK NUMBER n Meaning An error has occurred while writing to a directory block Result This block is skipped and is not updated by the File Salvager Action Depends on the return code ifn UNABLE TO ACCESS DIRECTORY BLOCK NUMBER n Meaning An error has occurred while reading from a directory block Result This block is skipped and is not updated by the File Salvager Action Depends on the return code ifn SALVAGING REPORT FOR FILE filename Meaning The file was found to be unstable when it was opened You are warned that the File Salvager has been activated for this file Result The File Salvager makes the file stable and coherent Action None ifn FILCHECK REPORT FOR FILE filename Meaning FILCHECK has been activated to make the file stable and coherent Result You will be able to use the file with no inconsistencies Action None ifn UNABLE TO ACCESS A BLOCK OF BAM END OF SALVAGING Meaning An error has occurred while accessing a block of the Block Allocation Map File Salvaging is terminated Result The file is not completely salvaged and is therefore not stable Action Depends on the return
33. OPENS MACRO LIBRARY FOR retrieve member name or store_member name RC edited_return_code Meaning MACPROC was unable to access or create the specified member of the retrieve or store library The return code indicates the reason Such an incident may be due to a system error Result Processing stops Messages in the JOR indicate which units have been processed Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center GET MACRO LIBRARY FOR retrieve_member name RC edited_ return_code TYPE Meaning MACPROC was unable to read a record from the specified member of the retrieve library or store library The return code indicates the reason Such an incident is very unusual and may be due to a system error Result Processing stops Messages in the JOR indicate which units have been processed Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center OF MACRO IS NOT MAC retrieve_member_name Meaning The specified member of a retrieve library was not produced by MACPROC Result Processing stops Messages in the JOR indicate which units have been processed Action Check the JCL or the contents of this retrieve library 47 A2 10UJ MAC Messages MAC55 CLOSES MACRO LIBRARY FOR retrieve_member_ name or store_member_name RC edited_return_c
34. The project still has access rights 55 17 Messages and Return Codes Directory 55 18 1C20 1C21 1C22 1C23 1C24 1C25 1C26 1C27 1C28 1C29 1C30 1DC0 1DFF 1DC1 1E00 1E4F 1E01 1E02 1E03 1E04 1E05 1E06 1E07 1E08 1E09 1E0A 1E0B 1E10 1E11 1E12 1E20 1E21 1E22 1E25 1E26 1E30 1E31 1E32 1E40 1E41 1E42 2000 20FF 2100 21FF 2200 22FF 2300 23FF 2400 24FF 2500 25FF EMPTPLST STNOINIT JUMPERR VFUERR PAPERR HEADERR BSNFERR ILLCPHDR UPDCI UNSTABLE JRNALERR WRONGDAT WRONGSSF IOERR MLAINTER DATAERR TIMEOUT BREAK UNRECIO STANDBY OFFLINE DEFTRACK PARITYER WRITPROT REPNEED TRBSYNID TRBSYIDC TRBSYIDE RTCOVNID RTCOVIDC RTCOVIDE STUNTEST ILSTREQ MGNAKNID MGNAKIDC MGNAKIDE TONID TOIDC TOIDE CCBUFNAS CCDADVL CCFMVL CCFLGIL CCBRIL CCNUMIL Empty polling list Station not initialized Illegal jump VFU error Paper definition error Wrong header Block serial number format error Illegal channel program error A control interval has been updated Undefined Journal information not consistent Wrong data sent to unit records Wrong SSF data IO in an erroneous state due to a firmware or a hardware error MLA interlocked Error in data read Time on exhausted in MLA Break recognized Unrecoverable IO termination Device stand by Device off line Defective track Parity error Device in write protect state Repositioning needed Terminal busy no input da
35. UNABLE TO RETRIEVE INPUT FILE DEFINITION Meaning The sort cannot determine the characteristics of the input file A return code from H_RFLDEF or a return code set by Sort is given JCL error or non standard file ERRORS IN SORT PARAMETERS Meaning This message is only a general title for specific messages USER SORT KEYS ARE TOO LONG Meaning The SUM or KEY field length exceeds 7000 bytes Action Correct the user program 42 29 Messages and Return Codes Directory TD26 11 TD26 12 TD26 13 TD26 14 TD26 15 TD26 16 TD26 17 TD26 64 42 30 USER RECORD IS TOO LONG Meaning The sort record size exceeds 15000 bytes Either the user record is too long or too many keys overlap Action Correct the user program UNABLE TO OPEN INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO CLOSE INPUT FILE Action Report the problem to Technical Support UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF INVALID MONITORED SORT_INPUT_FILE ASSIGNMENT Meaning Conditions for use of SHARE MONITOR GAC
36. catalog name NOT DELETED SYS CATALOG MUST BE DELETED BEFORE SITE CATALOG Meaning Requested deletion of SITE CATALOG cannot be performed because a SYS CATALOG exists on the site Note that the SYS CATALOG is mandatory when AFTER JOURNAL facilities are used The SYS CATALOG is usually allocated at system tailoring time when after journalization has been requested on the site SHIFT OF GENERATION GROUP IS NOT SUCCESSFUL Meaning The requested SHIFT operation has not been performed on the generation group specified The reason is given by a following message DCTO1 If the return code given in the message DCTO1 is MDNAYV the following situation has occurred Usually a SHIFT of a generation group requires the volumes supporting the generations to be mounted in order to perform various checks but the operator refused to mount the volumes by issuing a CANCEL REQUEST command Result The SHIFT is not performed 47 A2 10UJ DCT67 DCT68 DCT69 DCT70 DCT71 47 A2 10UJ DCT Messages Action The FORCE parameter of the SHIFT statement can be used in order to avoid volume mounting but this option must be used with care because in this case the checks are not performed NEW FILE NAME ALREADY EXISTS FILE Meaning A catalog creation CATBUILD has been requested but a file with the same name already exists on the specified media Result The utility is not performed Action None ALREADY HAS A M
37. 120A 120E 120B 120C 120D 120E 120F 1210 1211 STTNUNKN APPLUNKN RLUPUNKN RLBPUNKN RLAPUNKN RLSPUNKN DNODUNKN DBMXUNKN DNSPEC NJAFT CASEUNKN MISSREL OVERFLOW SPACEOV SYSOV CPOV DIMOV MSGOV BUFNBOV SGOV DVOV LINKOV STAKOV ROSTAKOV RISTAKOV R2STAKOV R3STAKOV COUNTOV DIROV ECBOV Return Codes Listed in Numerical Order Object2 unknown on volume Relationship unknown on volume Copy unknown on volume Account unknown on volume Absolute generation unknown on volume Symbolic generation unknown on volume Relative generation unknown on volume Index unknown Queue unknown Link name unknown Key unknown record not found Unknown operator User unknown Not found in catalog Project unknown Not found in catalog Billing unknown Not found in catalog Station unknown Not found in catalog Application unknown Not found in catalog Relation user project unknown Relation billing project unknown Relation application project unknown Relation station project unknown Destination node unknown Destination mailbox unknown Destination not specified After journal is not accessible Not a case constant Missing relationship between file and index Overflow would occur Space overflow System configuration overflow Channel program overflow Overflow of the area dimension Message number overflow Buffer number overflow not enough in the working pool Segment size would exceed max
38. 1A3C 1A3D 1A3E 1A3F 1A40 1A43 SPWRZRNG SPWRNG DPWRZRNG DPWRNG QPWRZRNG QSPWRNG SSQRNG DSQRNG QSQRNG SSNCPREC DSNCPREC SNCPREC STANOV STANPREC DTANOV DTANPREC QTANOV QTANPREC SCOTOV SCOTLOW SCOTPREC DCOTOV DCOTLOW DCOTPREC QCOTOV QCOTLOW QCOTPREC SASCUD DASCUD QASCUD SAT2ZR DAT2ZR QAT2ZR SFACOV SFACNG SGAMOV SGAMNGA SGAMZR SGAMUN SGAMZRA SGAMNG SLGMNG SLGMNGA SLGMUD SLGMUN DFACOV Return Codes Listed in Numerical Order Zero to negative power is undefined Negative power to number is ambiguous Zero to negative power is undefined Negative power to number is ambiguous Zero to negative power is undefined Negative power to number is ambiguous Square root of negative number Square root of negative number Square root of negative number ARG gt 10 8 loss of precision ARG gt 10 15 loss of precision ARG gt 10 27 loss of precision ARG too near to N PI 2 ARG gt 10 8 loss of precision ARG too near to N PI 2 ARG gt 10 15 loss of precision ARG too near to N PI 2 ARG gt 10 27 loss of precision ARG too near to N PI from above ARG too near to N PI from below ARG gt 10 8 loss of precision ARG too near to N PI from above ARG too near to N PI from below ARG gt 10 27 loss of precision ARG too near to N PI from above ARG too near to N PI from below ARG gt 10 27 loss of precision Undefined for ARG gt 1 Undefined for ARG gt 1 Undefined for ARG gt 1 Both
39. 47 A2 10UJ ARSTFBID ARVIOL 47 A2 10UJ VCAM VCAM ISO 1705 Various Operations Catalog Management CATMODIF 1501 CATALOG Catalog Management Various COBOL RTP File and Device Management File Management GAC and GAC EXTENDED Job Management Physical I O Access internal Operations ASSIGN OPEN Utilities File Storage and Tape Handling File Space Management Utilities WRITE REWRITE DELETE Step Initiation In General Change Queue State Various Operations ABNCCAD to DATALOSS Return Codes Either a VCAM primitive or an argument has been specified which is incorrect A predicate or a composition of predicates has an invalid value Check the ISO session context according to the functional units that are selected and Session Service execution to the ISO Session Service and Protocol manuals for the definition of predicates Refer Access rights setting forbidden As SITE CATALOG is not protected you cannot set access rights on another catalog Access rights violation 1 The submitter project cannot access the given item file directory volume Set only when the CHECK parameter X 01 2 The requestor has no access rights on the specified object Inconsistency between generated code and COBOL RTP Contact the Service Center Illegal access rights or the disk is not a native GCOS 7 disk The user does not have the right to access the disk
40. An error message refers to the command that precedes it in the listing The message text in addition to the faulty command printed allows easy error detection These message texts are not listed here Pertinent Manuals IDS II User s Guide 47 A2 12UD Full IDS II User s Guide 47 A2 07UD UFAS EXTENDED User s Guide 47 A2 04UF IQS Reference Manual Volume 1 47 A2 77UD IQS Reference Manual Volume 2 47 A2 78UD 9 1 Messages and Return Codes Directory Error Localization Every error message except messages printed during analysis of run time options is provided with a standard header that describes the context of the error In the messages that follow this standard header is indicated as lt error localization gt The header has the following format ERR DDMx PGID Y ILN Z SCH V SUB W ORG aa bbbb U WNG The meanings of the various fields are DDM Data Description and Manipulation X A 5 digit decimal number which is the code of the DBCS message Y A 12 character field containing the ProGram IDentification Z A field of a maximum of 7 decimal digits containing the Internal Line Number of the DML program V A30 character field containing the SCHema name W A 30 character field containing the SUBschema name aa A 2 digit decimal number which identifies a DBCS function either external such as STORE or internal bbbb A 4 digit decimal number which identi
41. CLCPOOL command text ERROR INIT_XCP2_VALUES Internal error Communication with partner is not established or is not available ERROR GET POOL _REQUEST_PPC Internal error Abnormal return code returned from PPC when trying to get information on pool ERROR OPEN_POOL_XCP2_ACCEPTOR Internal error If the return code is not ABOPROC this message is preceded by the message TX02 TX56 TX72 or TX73 ERROR MOD_POOL_XCP2_ACCEPTOR Internal error This message is preceded by the message TX72 or TX73 ERROR CLOSE POOL _XCP2_ ACCEPTOR Internal error OPEN POOL REJECTED DUE TO PVNTC 47 14 47 A2 10UJ TX Messages Pool request is rejected due to the previous master command PVNTC ERROR H_PPC_REPLY POOL Internal error Action If internal error contact your supplier 47 A2 10UJ 47 15 Messages and Return Codes Directory 47 16 47 A2 10UJ XXNN OOCC 47 A2 10UJ 48 System and File Violation Messages When a system or file violation occurs the error message has the following format XXNN is the key of the message XX is the abbreviation of the system component that sent the message for example JB for Job Management NN is the message number for example 65 in JB65 0X0 is the two digit object code It identifies the object on which an invalid access was performed refer to the list below cc is the two digit violation clas
42. Check the collector initialization commands Duplicate TRCFILE command definition in the collector initialization file Check the collector initialization commands EFN or CMD keyword are absent on a TRCFILE command in the collector initialization file Check the collector initialization commands Incomplete TRCFILE efn command in the collector initialization file Check the collector initialization commands Incorrect external TRCFILE name in the collector initialization file Check the collector initialization commands 47 A2 10UJ TR Messages 4004 45 ARGERR Incorrect filestat attribute for a TRCFILE in the collector initialization file Check the collector initialization commands 4004 46 file asg RC Incorrect dynamic assign for a TRCFILE defined in the collector initialization file Verify TRCFILE names 4004 47 ARGERR Incorrect threshold word on a TRCFILE command in the collector initialization file Check the collector initialization commands 4004 48 ARGERR Threshold is not a positive percent on a TRCFILE command in the collector initialization file Check the collector initialization commands 4004 49 ARGERR Incomplete TRCFILE command in the collector initialization file Check the collector initialization commands 4004 50 h_get access inc Collector initialization file read error Verify RC command file status 44 1 2 SICID 4005 Messages TBL NE Error number Return code Meaning Act
43. DCT22 DCT23 47 A2 10UJ DCT Messages Result The utility is not performed Action Modify the NBGEN parameter of the statement BAD SEQUENCE OF OPERATIONS BETWEEN SITE AND SYS CATALOG Meaning Occurs when the FILREST or FILDUPLI utility applies to a non protected site catalog as output although the running SYS CATALOG is protected Result The utility is not performed Action Set access rights on the output site catalog ACCESS RIGHTS DELETION FORBIDDEN Meaning When the site catalog is not protected it is forbidden to delete access rights in a private catalog Result The utility is not performed ACCESS RIGHTS SETTING FORBIDDEN Meaning When the site catalog is not protected it is forbidden to set access rights in a private catalog Result The utility is not performed DUPLICATE NAME MLINK NOT CREATED IN SITE Meaning This warning message is sent each time a user or an utility creates a master directory in an automatically attachable catalog when the named directory already exists either as a master directory of the site catalog or as a master directory link known in the site catalog Result The given master directory is created in the private catalog but it will not be a master directory link known from the current SITE CATALOG Action If an automatically accessible directory is required delete the one currently created and create another with a different name DEVCLASS MEDIA MUST BE MO
44. GCOS 7 is declared secured but the BCLS system is not present in the basic network configuration run the NETGEN utility specifying the configuration as secured or 3 System error while enabling the directory contact the Service Center 47 A2 10UJ NORECFND NORMAL NORUN NOSWAP NOTALL NOTCLOSV NOTDONE 47 A2 10UJ IONOP to RESIDENT Return Codes System Nucleus Dynamic Entry point not found SM not found on backing Addresser store and not known to process SM library not found Load the corresponding SM System Nucleus Dynamic Entry point cannot be retrieved or SM sharable Internal Addresser module cannot be found Retrieve or Delete VMM Virtual memory file block not found in directory Internal error Contact the Service Center TDS TPR Operation Next program name unknown UFAS EXTENDED BATABNB and CICA or KEEP option incompatible Contact the Service Center 00DC No record found 0000 OOFF Operation has been normal or almost normal 0114 Request not run by operator SBR Analyzer The SBR Analyzer has been cancelled by the CJ command 1cic VMM area cannot be swapped 0115 Request not fully performed unpredictable results may occur TDS Master Command The M CTC COR lt starname gt Master Command was sent The list of TDS correspondents increased while TDS was processing the command Try the command again 1c18 IFN not in close volume state 0110 Function not performed nothing destroyed
45. KEYCHG KEYERR 53 4 1877 JP error Journalization The J number to journalize is either X OO or X FF Send the PRLOG log to the Service Center System Nucleus Task Job and process number do not exist Internal Management error VMM The job and process number specified in the argument do not exist System Trace Collector The job number and process number given in the Trace message are not those of the collector If this message persists stop and restart the collector 1 30 Journal information not consistent Journalization Inconsistency in Journal tables or directory The error is logged in the SYS ERLOG file Send the error log to the Service Center 1 22 Illegal jump COBOL Attempt to execute a GOTO statement without the procedure name before it was altered 0036 The execute right is just allowed 0204 Attempt to change existing record key COBOL Status Key value 21 Any Disk File REWRITE Attempt to change an existing primary key Organization Except Sequential 1898 Key mismatch between source program and preallocation COBOL Status Key value 90 Any File OPEN or START Discrepancy between record key defined in Organization With source program and record key specified in Key Access PREALLOC KEYSIZE or KEYLOC Correct program or JCL 47 A2 10UJ KEYHIGH KEYUNKN LABELERR LABUNKN LCPERR LEVVIOL 47 A2 10UJ COBOL RTP File Management System
46. Meaning The report is not in the queue Who receives the message The COMMANDSUB TW19 lt Rxxxx gt REPORT FROZEN SYSTEM INTERRUPTION Meaning The reports that are being processed when a GT Writer interruption occurs are frozen Who receives the message The SUBUSER 47 A2 10UJ 46 9 Messages and Return Codes Directory TW19 TW19 TW19 TW19 TW20 TW21 TW22 46 10 lt Rxxxx gt REPORT FROZEN TERMINAL ERROR Meaning Reconnection attempts are stopped either because the number specified in RETRYCT is reached or because a CTO HTO or TTO command is issued The report is frozen Who receives the message The OWNER CONTROL and the SUBUSER lt RxXxxx gt REPORT FROZEN USER REQUEST Meaning Interruption of a report printing on a terminal which is being deconnected or for which RETRYCT 0 No attempt is made to reconnect it The report is frozen Who receives the message The SUBUSER lt RxXxxx gt REPORT FROZEN FAST SHUTDOWN Meaning Interruption of a report printing on a terminal which is being deconnected with a fast shutdown The report is frozen Who receives the message The SUBUSER lt RxXxxx gt REPORT FROZEN TWRITER ABORT Meaning Interruption of a report printing because of a GT Writer abort The report is frozen Who receives the message The SUBUSER lt command gt NO REPORTS Meaning The queue is empty Who receives the message The COMMANDSUB lt com
47. RWI TDS IFNNASG 0909 Any Component COBOL Program Execution 52 30 IFN does not lead to a valid structure Any Operation LOCKMARK Option USTART CMG 13 SICID TP7 6 SICID TP7 52 SICID OPEN or START Command Internal file name not recognized on ifn The error may be internal invalid FCB due to volume switching or a system error because memory is corrupted The file control block pointer is invalid An invalid internal file name has been specified Error in the SYS TW OUT file definition of the TDS when using H_TW_USTART Any output created with H_TW_USTART is not enqueued and will not be printed The pointer on the IFN is incorrect or it does not point to an FCB Send the PRLOG log to the Service Center IFN error The specified argument IFN or FILE_ID does not pertain to a valid group of file control structures Access to a file that has been deassigned Check the IFN or state of the file and the source of the generation Attempt to assign and or open a file that is not declared in the generation Check the IFN or state of the file and the source of the generation Attempt to issue a load unload TDS file that is not declared in the generation Check the IFN or state of the file and the source of the generation ifn incorrect file may already be open Syntax may be incorrect or there may be an internal error No entity assigned to the internal file name COBOL Status
48. TD35 13 TD35 14 TD35 15 42 34 Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO GET SEMAPHORES Action Linkage problem insufficient semaphore pool Could be caused by nested sorts UNABLE TO START A SERVANT PROCESS Action Check that you have not tried to run a multi process sort with the mono process LM or with a multi process LM which was linked with insufficient few processes declared with respect to the value of the NB_ PARAL field of SRTDEF for a subroutine parallel sort UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check fi
49. TX63 TX64 TX65 TX66 TX67 47 A2 10UJ TX Messages COMMAND cmdnm IGNORED RETRY LATER Returned when a command is submitted by an IOF or PMOS correspondent who has not the turn that is when a transaction is already running for its current session SM LIBRARY NOT FOUND ISSUE DISPLAY_TDS TO CHECK Response to MDTDS SMLIB SWAP CONTEXT MAXIMUM REACHED Unsolicited message cmdnm ifn action where action is 1 CLOSED 2 OPENED Response to 1 CLIF or startup message file assigned and closed 2 OTF or startup message cmdnm ifn NOT action gr4 where action is 1 CLOSED 2 OPENED Response to 1 CLIF 2 OTF or startup message UNKNOWN MASTER COMMAND cmdnm cmdnm COMMAND NOT result where result is 1 PERFORMED SHUTDOWN IN PROGRESS 2 SUPPORTED FOR PROGRAMMED OPERATOR Response to 1 TTDS command has been issued Programmed operator cannot submit another command 2 EXEC_TDS or MDTX for programmed operator cmdnm tobjnm action where action is 47 9 Messages and Return Codes Directory 1 LOADED INTO MAIN MEMORY 2 UNLOADED FROM MAIN MEMORY Response to 1 LDTMEM 2 UNLDTMEM TX68 cornm UNRECIO ON BEFORE JOURNAL CI NUMBER cinb FOR efn Unsolicited message The input output operation failed TX69 reason txnm SPAWN CANNOT BE STARTED FOR cornm where reason is 1 ACCESS DENIED TO TX 2 UNKNOWN TX TX70 poolnb POOL S O
50. The close function automatically requested at step termination ends without updating file labels on disk or without writing the EOF label on tape Action Check the file SYSTEM ERROR EXCP exception type ICC exception address Meaning An exception has occurred during the execution of system code This is a system error Action Contact the Service Center FILE NOT ACCESSIBLE SECURITY LOCK SET FOR IFN ifn EFN efn Meaning A file was security locked SLOCK option of the CATMODIF JCL statement and the step attempted to OPEN this file in a processing mode which is not allowed For more details refer to the Catalog Management User s Guide The name of the involved file is given in a following message FP17 Result The file cannot be opened The abnormal return code WRONG PMD is set MONITORING ACTIVE LOCK FILE IS UNEFFECTIVE FOR IFN ifn Meaning The step is under GAC control SHARE MONITOR option specified for a file and an attempt is made to lock a file H_LOCK primitive in GPL Both facilities cannot be used at the same time because a deadlock situation could arise Result The locking of the file is not performed The abnormal return code SHCTVIOL is set 17 9 Messages and Return Codes Directory FP51 MONITORING REQUESTED LOCK FILE DENIED TILL OPEN FOR IFN ifn Meaning The step may be under GAC control SHARE MONITOR option specified for a file and an attempt is made to lock a file H_LOCK p
51. The whole text may be edited by several consecutive MU74 messages Action None internal error Type of message Warning Dump taken Yes Recipient of the message Main Operator and TDS Master MU75 NO MORE TABLE SPACE FOR TRANSACTION STACKING Meaning A transaction is prevented from executing due to lack of TDS table space Action Increase the value specified in the NUMBER OF TERMINALS clause or in the TMSESS clause in NETGEN Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU76 NO MORE SWAP SPACE FOR TRANSACTION STACKING Meaning The TDS swap file is full This is detected when processing special purpose transactions such as break and logon for which the allocation of a new swap context is requested Action Increase the TDS swap size by executing the TP7PREP utility and re run the TP7GEN utility 47 A2 10UJ 29 17 Messages and Return Codes Directory Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU77 CANNOT START IQS SESSION FOR VIEW xxxxxxxx Action Refer to the JOS TDS User s Guide Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU78 CANNOT INITIALIZE IQS STRUCTURES FOR FILE xxxxxxxx Action Refer to Section 3 of the JOS TDS User s Guide Type of message Warning Dump taken No Recipient of the message Main Operator a
52. This error is usually detected at step initiation time and the step cannot be started Action Check the JCL DV10 INCORRECT DEVICE NAME device id Meaning Device Management received an illegal value for device id this is probably due to a system error Action Contact the Service Center DV11 DEVICE device id IS NOT AVAILABLE Meaning A device requested for mounting a volume DVIDLIST parameter of the JCL ASSIGN statement was not available the operator had put the device in the HELD state Alternatively a Test and Diagnostic request T amp D has been made while an Automatic Volume Recognition AVR is running Result The step cannot be started Action Set the device to IN and restart the job Avoid an explicit request for a particular device whenever possible Alternatively wait for the end of the AVR and restart the T amp D DV12 DEVICE device id IS ALREADY REQUESTED Meaning In the same step one device was explicitly requested DVIDLIST parameter of ASSIGN JCL statement for mounting two different volumes or no device is free 47 A2 10UJ 14 3 Messages and Return Codes Directory Dv13 Dvi5 Dv16 Dv17 DV18 14 4 Result The step cannot be started Action Correct the JCL or try again later Avoid an explicit request for a particular device whenever possible NUMBER OF REQUESTED DEVICES IS INCORRECT Meaning Incorrect argument values were received by Device Management
53. VCAM ISO has been reached Increase the allowed number of ISO sessions at configuration time or at SSAP definition System overload Allocate Job Entry System load table is full no entry is free A software problem caused an overload in the OWQ Block addressing the Mask table Contact the Service Center 54 19 Messages and Return Codes Directory TABOV 54 20 TDS 1219 GAC and GAC EXTENDED Job Management Journalization MCS OMH PCF Queued Files RBF Services SBR XCP2 Commitment Unit Management There are no more segments available for the TDS application in the JPPC job Increase the CONFIG JPPC parameter or modify the MAXCONV parameter in the system configuration No more space in table The lock list has overflowed The offending CU is aborted and restarted automatically from the beginning The number of lock list entries specified by NUMLOCK is guaranteed to the CU Alternatively the maximum number of lock ids that can be active simultaneously for GAC files NBLOCKID has been exceeded Resource Locking The value specified by NUMLOCK is Load Module Loader SWI Message Management OPEN Station Management Tabulation Handling insufficient for the CU Too many sharable modules active in the system The limits of the journal tables have been exceeded Send the PRLOG log to the Service Center Internal system error Contact the Service Cent
54. by specifying the value in a DEFINE statement ifn INCOMPATIBLE BLOCKSIZE RECSIZE VALUES FOR COMPACTION Meaning For compacted files the blocksize must be at least equal to the maximum record size 4 bytes for the record header 1 byte per 128 characters of the maximum record size Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn BLOCKSIZE SHOULD BE gt TO RECSIZE F FB Meaning With record format F or FB the blocksize must be at least equal to the record size Action This type of message is related to checking the consistency of file characteristics Remember that these characteristics are provided as follows e in the file label when the file already exists and the file label contains this information in this case the file label is incoherent e in the file description of the program or in a JCL statement DEFINE when either the file is to be allocated by the step execution or when the file already exists but the file label does not contain these characteristics DOS VS files in these cases a correct value must be specified either by modifying the program or by specifying the value in a JCL statement DEFINE ifn ILLEGAL NUMBUF VALUE 0 Meaning The number of buffers for the file specified either in the file description of the source program or in the JCL statement DEFINE should have a positive value Result The f
55. directory Ty g pty ry BACKWARD SHIFT FORBIDDEN GENERATION NUMBER OOOO NOT ALLOWED SYS Meaning A shift operation has been requested on a close loop generation group This was done by specifying CURGEN where CURGEN lt NBGEN The corresponding generation is not valid since its absolute number is equal to zero Result The utility is not performed Action Supply a larger value for CURGEN CATALOG PROTECTED RESET ACCESS RIGHTS ON SITE CATALOG Meaning Sent after running the FILDUPLI or FILREST utility for a site catalog The receiving catalog is not protected although the current SYS CATALOG is protected Result The utility is not performed Action Put access rights onto the receiving site catalog 47 A2 10UJ DCT38 DCT39 DCT42 DCT43 DCT46 DCT47 47 A2 10UJ DCT Messages SPECIFIED ATTACH IS INCOMPATIBLE WITH REQUESTED FUNCTION Meaning A catalog renaming has been requested on an automatically attachable catalog no other attach than ATT is authorized on the renamed catalog Result The utility is not performed Action Perform ATT and try the CATMODIF function again USE AUTOATT NAUTOATT ONLY WHEN THE ENTRY EXISTS IN SITE CATALOG Meaning The CATMODIF utility is running on a catalog previously attached using the ATTACH command with the DVC and MD parameters This catalog has no entry in SITE CATALOG Result The requested action is not performed Acti
56. file but the extension failed because no more space was available on the volumes specified in the volume list Result The End of File condition is returned to the program Action Extend the file on another volume using the PREALLOC utility CYLINDER S TRACKS ALLOCATED ON VOLUME volname SECTORS FOR IFN ifn EFN efn BLOCKS Meaning Information message indicating that an allocation took place for the file on the specified volume The allocated size is given in the unit indicated Result Execution proceeds Action None ON VOLUME volname FOR ON RESIDENT VOLUME S FOR IFN ifn EFN efn FOR EXTENSION FOR w w w w w Meaning Allocation of the file was requested ALLOCATE in JCL but no more space was available on the volume specified The automatic extension mechanism has been initiated for the specified file but the extension failed because no more space was available on the volumes specified in the volume list Result The file cannot be opened the abnormal return code SPACENAV is set Action Specify another volume in the ASSIGN statement 47 A2 10UJ FP06 FP07 FP08 FP09 FP10 47 A2 10UJ FP Messages CANNOT CLOSE IFN ifn RC edited return code Meaning Warning message indicating that the CLOSE function automatically requested at step termination if it was not previously requested by the user failed for the reason given by the return code Actio
57. ignored Result Only the valid job descriptions or data entry descriptions are entered Action Check the input file IN20 ron SWITCHED FILE NOT READY AT INTRODUCTION TIME Meaning The input file read by the JCL statement RUN contains a SWINPUT statement which refers to a file or a volume that was not mounted at job introduction time Result The job which contains the SWINPUT statement is not entered Action Mount the volume and re enter the job IN21 ron SWITCHED FILE RESOURCE BUSY AT INTRODUCTION TIME Meaning The input file read by the JCL statement RUN contains a SWINPUT statement which refers to a file or volume being used by another job at job introduction time Result The job which contains the SWINPUT statement is not entered Action Retry later IN27 INPUT RECORD SIZE MAY BE TOO LARGE Meaning The file specified in the JCL statement RUN has a record size greater than 1024 and cannot be accepted by the reader Action Check that the correct file was specified 47 A2 10UJ 22 3 Messages and Return Codes Directory IN31 NO JOB INTRODUCED Meaning The execution of the JCL statement RUN did not result in a job being introduced This may occur for example when the RUN statement specified job selection JOBS parameter and the first job has not been found in the input file Action Check the JCL statement RUN and the input file contents 22 4 47 A2 10UJ
58. or forbidden option requested according to the caller s ring The requested function is reserved for system use only Something has been cancelled The volume cannot be restored because the save was incomplete Check if all the tapes containing the volume save are mentioned in the volume list or use another save Abnormal termination of the collector is requested Refer to the output library and JOR Cancel an event within event manager The IO has been cancelled Channel program check on main console Inform Service Center VO cancelled The input output was cancelled by one of the following H_IOCAN H_RWCLOSE termination of the process issuing the request 47 A2 10UJ ABNCCAD to DATALOSS Return Codes CASEUNKN 1032 Case unknown Pascal RTP Not a CASE constant CATERR 1879 A file has been requested which should be cataloged and is not or vice versa Catalog Management File Storage Tape 1 The file is cataloged and the user says that it Data Management Handling is uncataloged or not protected or the file is Utilities uncataloged and the user says that it is cataloged File Management or protected Check JCL catalog contents and file label 2 The specified object can only be cataloged in SITE CATALOG File Management Save and Restore An attempt has been made to duplicate or restore a cataloged file into a file which is not cataloged An attempt has been made to write to a magnetic t
59. parameters RECFORM FIXTRACK and NOLREC differ from those given in the file definition Verify and modify these parameters for the log file concerned SYS ERLOG SYS LOGC and SYS LOGF Inconsistency between several options System error only Contact the Service Center Invalid enclosure level Modify this in your program Only 1 2 or 3 are allowed For Batch steps the REPEAT option is missing from the JCL statement STEP An invalid option has been used to launch the generation It must be WARM COLD or CLEAN No generation is performed Errors detected during IDSOPT analysis Error in option parameter e g user links telecommunications application program without option Operator not logged on in interactive mode A repeatable message has been sent to an interactive program A request has been issued to empty a mailbox in a non interactive program Error in compiler option string Option unknown Scientific option or emulator firmware not available Processing time not allowed to be modified Task Management The OPTIONS structure given in the H_BEGTSK external primitive or in the H_INITSK internal primitive does not belong to a process group shared segment Check the activation context of the H BEGTSK primitive 47 A2 10UJ TDS OPEN Unit Record Driver OPEN Printer OPUNKN 1024 Network Generation OMH Terminal Management OUTNAV 1 c13 OUTSEQ 0205 IONOP to RESIDENT
60. 1815 1816 1817 1818 1819 181A 181B 181C 181D 181E 181F ARSTFBID ACTIVVMA INVUSE ARDLFBID NFREEVMA NRECURS NCOMPREC REJCT SESREJCT DPREJCT PCREJCT ILLRECOV OPERATOR PARAMERR MODERR LCPERR SEEKERR CPERR OPCERR OPTERR LNERR SDERR TYPEERR NEXPDERR NSWAPERR DVCERR NMTCHERR EXECERR DVNERR DRTERR MSGERR ECBERR CDERR IDERR TREGERR SNDARERR RECARERR STAKERR ADDRERR INDERR COUNTERR JNBERR MDERR LINKERR ALIASERR Access rights setting forbidden Deletion forbidden for active VMM area Invalid use of function Deletion of access rights forbidden No free VMA Recursion not allowed No complementary record allowed Action rejected Session opening rejected Dialog protocol rejected Presentation control rejected Illegal recovery Decision taken by operator Parameter erroneous due to a programming error Error in modification request Error in logical channel program No seek command in a disc channel program Error in channel program Operation code error Error in options Length erroneous Error in segment descriptor Entity type erroneous Segment is not expandable Segment is not swappable Device class error Unmatch error Segment is not executable Device name error Device requirement table error Message error Event control block error Command error Identifier error T register error Error in sending area Error in receiving area Specified segment should not be
61. Action None 47 A2 10UJ QL Messages QL70 CHANGE NAME ALIAS FUNCTION COMPLETED Meaning An interrupted rename function on an alias entry was detected Result The function is completed Action None QL74 SUBFILE DELETION FUNCTION COMPLETED BUT LOGICAL TRACKS MAY BE LOST Meaning An interrupted subfile deletion was detected Result The function is completed but the data block chain was not fully deleted Some file space may be lost Action Perform a MAINTAIN FILE recover command QL75 DIRECTORY ENTRY HAS BEEN UPDATED Meaning After salvaging the data of a subfile the corresponding directory entry was rewritten with the new characteristics of the subfile Result The subfile is fully accessible Action None QL152 FATAL I O ERROR ON DATA BLOCK NUMBER lt blk_number gt COMPLETION CODE lt XXXX gt Meaning While processing the file an I O error occurred on data block number lt blk_number gt Result If this message is sent while reading the subfile the IOFAIL return code is sent If this message is sent while writing to the subfile the current action is stopped and the NOWAIT return code is sent until the end of CLOSES Action None If a problem occurs at CLOSES the subfile is left unstable and salvaging starts at the next OPEN 47 A2 10UJ 35 19 Messages and Return Codes Directory 35 20 47 A2 10UJ 36 RDN Messages General En
62. Break processing the user must call the Program Checkout Facility H_DEBPR_ECONS The damaged track cannot be chained with the alternate track Defective track The write with verification request option WRCHECK Y when opening the session is not completed because a defective track has been detected in the file space A retry can be attempted after reallocation H_RWTOALTAREA from the first block following the block indicated in OUT_NUMBLOCK Address in description incorrect A step which is being loaded uses the CANCEL COBOL feature but does not have the INCLUDE CANCEL BLOCK segment Link the load module with the correct options Internal system error Contact the Service Center Overflow for X gt 174 67 There is an exponential function overflow for x gt 176 6 double precision ARG less than 200 underflow There is an exponential function underflow for x lt 180 2 double precision 52 3 Messages and Return Codes Directory DFACNG 1A44 DFACOV 1443 DGAMNG 1A4A DGAMNGA 1A46 DGAMOV 1445 DGAMUN 1A48 DGAMZR 1A47 DGAMZRA 1A49 DIMOV 1204 Automatic Resource Manager System Nucleus DIRERR 1863 Queued Files OPENS CLOSES BUILD STOW CHNAME RTSPCE 52 4 Negative argument ARG gt 56 overflow Negative argument ARG almost negative integer ARG gt 57 53 overflow ARG less than 57 53 underflow ARG 0 ARG almost zero Overflow of the area dimension If when an a
63. COBOL programs which execute both a DML schema and a DML subschema That is you cannot mix in the same step access to the old and the Full IDS II For further information refer to the JDS I User s Guide Result The step execution is aborted Action Check the COBOL program and modify the DB clauses DDMO0101 lt error localization gt IDS2 PROGRAMMING RULE VIOLATION TWO SUBSCHEMAS RELATED TO THE SAME SCHEMA CANNOT BE USED AT THE SAME TIME Meaning It is impossible to access the database via two subschemas related to the same schema For further information refer to the JDS I User s Guide Result The step execution is aborted Action Check the COBOL program and modify the DB clauses DDM01024 lt error localization gt SCHEMA INCONSISTENCY Meaning This message usually indicates a system error at the schema level Result In a Batch environment the step execution is aborted Action Check the schema description contact the Service Center if necessary DDMO01152 lt error localization gt SCHEMA INCONSISTENCY Meaning This message usually indicates a system error at the subschema level Result In a Batch environment the step execution is aborted Action Check the subschema description contact the Service Center if necessary DDM01536 lt error localization gt DATABASE SCHEMA INCONSISTENCY AT ADDRESS Asa Pe Dazn Meaning Inconsistent pointer or record header Result In Batch environment the step execution is abort
64. COR xxx or M CTC COR xxx where xxx refers to a correspondent with a multiple definition TM XCPM XCP2 in Netgen Avoid multiple definitions for your correspondents modify the Netgen declaration 47 A2 10UJ DATANAYV to IOFAIL Return Codes DUPREL 0420 Duplicate relationship Network Generation You tried to create an object in the telecommunications dictionary having the same attributes address as a previous one This error is described in the CRNETGEN report DUPSTIN 0413 Duplicate station DUPUSER 0412 Duplicate user DVCERR 180C Device class error Any Component Any Operation Specified device class does not correspond to valid device for this operation Check JCL SORT MERGE Workfile Handling The sort workfile is not assigned on one single disc device class Check the SORT or SORTWORK or equivalent JCL GCL statement If the sort workfile is explicitly or implicitly assigned on disc contact the Service Center DVIDFBID 1703 Device identification forbidden Availability Control Set Operating Illegal device type Only a cartridge device is Mode supported FORMS 1 The current device is not supported Check if the current device is in the list of supported devices 2 A system error has occurred during character synchronization device forbidden Contact the Service Center 47 A2 10UJ 52 11 Messages and Return Codes Directory DVNASG DVNAV DVNERR DVOV 52 12 0903 Any Organization
65. Destination application saturated Action Check the status of the remote network system 33 3 Messages and Return Codes Directory PT15 PT16 PT17 PT18 PT19 PT20 PT21 33 4 CONNECTION REJECTED STATUS DLGREJECT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Dialog rejection Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED STATUS PCREJECT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Presentation rejected negotiation result Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED STATUS TMOUT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Time out Action Check the status of the front end Refer to the VCAM error codes CONNECTION REJECTED STATUS ACCVIOL VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Access rights violation Action Check the access rights of the specified USER PROJECT BILLING to the system or application on the remote site Refer to the VCAM error codes CONNECTION REJECTED SECURITY CHECKS FAILED Meaning Security checks failed Action Enter the correct password CONNECTION REJECTED STATUS DNODEUKN VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Destination node unknown Action Check the network generation paramete
66. Destination mailbox is saturated and has REJCT option Destination mailbox is in the ending state is static and has REJCT option SBC allocation failed remote initiator case Session entry allocator failed remote initiator case NOTDONE return code when trying to put connection letter into the buffer pool Remote initiator case and ILLRL connection letter is not in agreement with DSA protocol Remote initiator case ILLRL connection letter specifies an extension and this parameter is not implemented in the current release Immediate connection asked for and destination mailbox saturated or not active Wrong routing path Connection arrives from a remote initiator and the specified destination is not the local node Synchronous OPMG verb and V OPENACK message received with a reject as reason Synchronous OPMG verb and V OPENACK message not received by the event processing Remote initiator case and wrong node codes are driven in the address record of the ILCRL connection letter Semaphore logon overflow The following supplementary C_REASON values with their STATUS values are for Maintenance Purposes only C_R stands for C_REASON and ST stands for STATUS in the following table TBL NE C_R ST C Reason 81 82 34 34 Failure when allocating session entry Reason V_R_DNODENOP Failure when allocating space for special user trace Reason V_R_DNODENOP Unable to access MGI parameter Unable to access WKS parameter or
67. Directory DUPNAME 52 10 0410 Any File Organization OPEN Catalog Management CATBUILD File Management FORMS Network Generation OMH SBR System Nucleus TDS File Storage and Tape Handling File Space Management Utilities Log in SWI Internal Analyzer Automatic Resource Manager Dynamic Addresser Store Operation VMM Master Command Duplicate name File exists in duplicate in the record The catalog file already exists with a valid media list in the site catalog The user tries to create an object which already exists in the same class Check catalog contents against JCL An attempt has been made to insert in the VTOC an efn which already exists The file name already exists on the given media list The specified form already exists Warning message only You tried to create an object in the telecommunications dictionary having the same type and name as a previous one Attempt to log in twice with same user name or duplicated label name in Switch Input or attempt to create mailbox with a name already used A command has been duplicated Remove the duplicate command The named Dimension already exists The specified entry point has already been stored Find and delete the sharable module with the same entry point File name or block name already exists internal error Contact the Service Center You have defined M LSTC COR xxx or M LSCPOOL
68. ERROR IN TDS COMMIT MANAGER Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU49 CANNOT CREATE IDS FD Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU50 CANNOT BUILD ROLLFORWARD CONTROL SEGMENT Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master 47 A2 10UJ 29 11 Messages and Return Codes Directory MU51 UNSUCCESSFUL REBUILD OF TERMINAL TABLE AT RESTART Action Run the TP7GEN utility and perform a cold restart Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU52 XXXXXXXX ASSIGNMENT IMPOSSIBLE AT RESTART Action Reload TDS and perform a warm restart with all available used files If unsuccessful perform a cold restart Type of message Warning Dump taken No Recipient of the message Main Operator MU53 TERMINAL WRITER STRUCTURE INITIALIZATION FAILED Action None internal error The GTWriter is not available for the TDS session Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU54 INTERNAL ERROR DURING CLOSING PROCESS Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU55 USER JOURNAL MISSING USED IN PREVIOUS SESSION Action Insert the DEFINE H_SWAP JOURNAL A
69. FILEOV File overflow due to a record insertion OA06 FLNAV File in alert status must be recovered before it can be opened 0A05 FUNCNAV Unavailable function for specified file e g READ on user journal file 47 A2 10UJ 58 1 Messages and Return Codes Directory 58 2 1020 0A07 0204 1807 Return Code Number 1466 1C04 1C19 1878 0115 1001 0700 1730 1806 1463 04C5 1021 1623 1442 0A18 1214 INDUNKN ITMNAV KEYCHG LNERR Return Code LOKVIOL NOCURREC NODELETE NOMATCH NOTALL NOTOPEN NOWAIT OPERATOR OPTERR PMDVIOL PROCEXP QUNKN RESVIOL RCVVIOL SCIDXNAV SFNBOV Index unknown TDS error A program tries to modify a file protected by the Before Journal but the journal was suppressed by the SUPPRESS BEFORE JOURNAL message Attempt to change record key on re issue of WRITE Erroneous length for variable length record Explanation The transaction tries to access a file opened in statistical read mode which is not explicitly specified for it A sequential file request preceded a direct request No DELETE allowed The next program name is unknown Set by M CANCEL when execution was incomplete Repeat command Referenced file is not open Simultaneous requests on a file have occurred in violation of non concurrency Transaction cancelled by M CANCEL command Attempt to execute a transaction with SUP
70. GETIOF or ASKIOF macro The user interrupted the action with a break Block serial number format error Backing store overloaded Backing store saturated not enough space to load or swap object e g load module sharable module page Stop process group loading Perform the DC BS MAP command and at the next restart increase the size of the overloaded backing store System backing store working set overflow Buffer not assigned The file transfer buffers have not been defined or do not have the required characteristics for example a multiblock transfer request has become a monoblock transfer request or vice versa After this return code is sent the buffer memory table is changed _ and this method cannot be used for the next request 47 A2 10UJ BUFNAV BUFNBOV 47 A2 10UJ OAOA Any File OPEN Organization Buffer Management Resource Status File Management File Storage and Tape Handling Journalization MCS SEND RECEIVE Physical I O Access VMM UFAS EXTENDED Unit Record Driver OPEN ABNCCAD to DATALOSS Return Codes Buffer not available File not opened due to lack of buffer space There are no more buffers available in the buffer pool The buffer pool may be enlarged There are no more buffers available in the buffer pool It was not possible to create a buffer either when the system was initialized or RERUN or during a rollback of a step after an abort Send the PRLOG l
71. GIM CI DU96 NO MORE BEFORE GIM BUFFER FREE DU96 GIM GETADR AND MODIFY NOT SET Meaning Internal error DU96 GIM SETCI AND MODIFY NOT SET Meaning Internal error DU96 GIM SETCI AND BUSY NOT SET Meaning Internal error DU96 WORKFILE CAN NOT BE EXTENDED Meaning The WORKFILE is too short and may not be extended further no INCRSIZE or no disk space DU96 NOT ENOUGH SPACE ON WORKFILE Meaning The WORKFILE is too short and may not be extended further no INCRSIZE or no disk space DU96 EXCEPTION IN MODULE H_DFSRD_SPGIM Action Indicate the module where the exception has arisen DU96 EXCEPTION IN DYNSAVE SERVER 12 9 Module H_Dfsrd_Srv DU97 DYNAMIC SAVE NOT PURCHASED Meaning Self explanatory DU97 ABNORMAL SERVER ACTIVATION Return code Meaning Internal error DU97 FILES FDB SEGS CREATE RC Return code Meaning Internal error 47 A2 10UJ 12 15 Messages and Return Codes Directory DU94 SERVER TERMINATION RUNNING BYPASS POP SERVER TERMINATION RUNNING BYPASS VOP DU97 DU97 DU97 DU97 DU97 DU97 12 10 DU98 DU98 DU98 DU98 12 16 Meaning Synchronization instructions are bypassed when the TERMINATE operation is running It may be after a TDYNSVR GCL command normal or after an abort of the dynamic save server abnormal CONFLICT BETWEEN NB_PSLAV_WAITING WAITING_P S TOPP Meaning Internal error ABNORMAL H_RDTKDR Return code Meani
72. H200CN5 H200CN6 H200CN7 H200CN8 H200CN9 H200CNA H200CNB H200CNC 47 A2 10UJ DATANAYV to IOFAIL Return Codes 0A13 Generation not available File Management File Space The cataloged file specified by the efn cannot be Management deleted as the file belongs to a closed loop Utilities generation group UNCATNOW should not be used in the command Network Generation 1 The generation of the communication s configuration is invalid run the CRNETGEN utility or 2 Some binary configuration in binlib is not found or invalid check the binary name or contents of the library and run the NETGEN utility again System Trace Trace has not been activated in the Initial System Load for this session of GCOS Reinitialize GCOS specifying TRC ON in the Initial System Load VCAM Any Operation VCAM segment or tables not generated 1013 Global extent unknown 0040 004C Last crossed channel number without form limit crossing over 0040 No VFU without FORMLIM 0041 Channel number 1 without FORMLIM 0042 Channel number 2 without FORMLIM 0043 Channel number 3 without FORMLIM 0044 Channel number 4 without FORMLIM 0045 Channel number 5 without FORMLIM 0046 Channel number 6 without FORMLIM 0047 Channel number 7 without FORMLIM 0048 Channel number 8 without FORMLIM 0049 Channel number 9 without FORMLIM 004A Channel number 10 without FORMLIM 004B Channel number 11 without FORMLIM 004C Channel number 12 without FORMLIM 52 27
73. H_OPEN FOR IFN ifn Meaning System error An irrecoverable I O error has been encountered during an open file operation while accessing the SYS KNODET file Result The file is not opened Action Contact the Service Center 47 A2 10UJ FP16 FP17 FP18 FP19 FP21 47 A2 10UJ FP Messages WORK VOLUME volname HAS BEEN ALLOCATED TO IFN ifn EFN efn Meaning This message may appear during the creation of a magnetic tape file or a diskette file and indicates that either the file has been created on a work file refer to the media list in ASSIGN or the volumes specified in the media list are not sufficient to support the file File creation is continued on a work volume the name of which is given in the message Result The volume indicated loses its WORK status and becomes a normal named volume Action None FILE CANNOT BE OPENED FOR IFN ifn EFN efn RC edited return code Meaning Message indicating failure to open the specified file The reason is given by the return code In some cases a message preceding the message FP17 gives a more detailed reason for the failure Result The abnormal return code is returned to the program In COBOL this will result in step abortion unless a special error recovery procedure was specified Action None VOLUME volname CANNOT BE OPENED FOR IFN ifn EFN efn RC edited return code Meaning System error during execution of a utility The specifi
74. IONOP 0485 MCRDFAIL 0486 MCWREAIL 0487 ABNCCAD 0488 SRCHFAIL 04C0 04E0 ABORT 04C1 UPTERM 04C2 ABOPROC 04C3 ABTASK 04C4 ABORTPG 04C5 PROCEXCP 04C6 ILLSEM 04C7 HARDMALF 04C8 INVSTACK 04C9 INVPECT 04CA UABORT 04CC ABORTCU 0500 OSFF OVERLOAD 0501 CMOVLD 0502 UMOVLD 0503 BSOVLD 0504 OPQOVLD 0505 REQOVLD 0506 SYSOVLD 0507 FILEOVLD 0508 VMADVLD 0509 PURGECI 0600 TRUNC 0700 NOWAIT 0800 087F BOUNDOUT 0801 RONOUT 0802 INDOUT 0803 SUBFROUT 55 6 Parameter value is incompatible with another parameter value Software IO failure Software IO failure Channel in enqueued or active status Channel not operational Read failure in macro processing abort the currently running procedure Write failure in macro processing abort the currently running procedure Abnormal completion code returned with additional data Search failure Abort the current running step Mother task is terminated Fatal error abort the currently running procedure Abort task Abort process group Abort by process or system exception strictly reserved to ECP Illegal semaphore Hardware malfunction Invalid stack descriptor Invalid private PECT entry Abort requested by user Abort Commitment Unit Some component of the system is currently overloaded Central memory overloaded User memory overloaded Backing store overloaded Operator queue overloaded Request overloaded System overloaded System file overloaded Virtual memory area overloaded A
75. JOURNAL RC edited return code Meaning The After Journal primitives OPEN CLOSE WRITE or the Before Journal primitives NOTE ROLLBACK have not been executed correctly Abnormal return code Result In a Batch IOF environment the step execution is aborted Action Contact the Service Center DDM00034 lt error localization gt UNEXPECTED RETURN CODE WHEN REWRITING PAGE page_nb USER LABEL RC edited return code Meaning The label or page after image rewriting has not been executed correctly ROLLFORWARD Abnormal return code Result See ROLLFORWARD utility Action Contact the Service Center 47 A2 10UJ DDM Messages DDM00048 lt error localization gt UNEXPECTED SYSTEM RETURN CODE RC edited return code Meaning One of the other SYSTEM primitives has not been executed correctly Abnormal return code Result In a Batch IOF environment the step execution is aborted Action Contact the Service Center DDM00049 UNEXPECTED RETURN CODE DURING ERROR PROCESSING RC edited return code Meaning The primitive which processes the error messages has not been executed correctly Abnormal return code Result In Batch IOF the step execution is aborted Action Contact the Service Center DDM00050 lt error localization gt UNEXPECTED RETURN CODE WHEN PROCESSING USER TRACE RC edited return code Meaning The primitive processing the user trace has not been executed corr
76. LKOO 100 00 SUMMARY FOR output module name error summary NO OUTPUT MODULE PRODUCED Meaning Information message displayed for each output module to be created as either a load module or a TPR executable module it indicates e the version of the linker 100 00 e the name of the output module e the summary of detected errors i e the number of errors for each severity e whether or not the output module was produced LKOO 100 00 fatal error message text Meaning This message is displayed when a fatal error has been detected and gives the reason for the error Refer to the LINKER User s Guide for a full description of the message text LK32 01 UNABLE TO OPEN SYSOUT RC edited return code Meaning The linker failed to OPEN the report file As a general rule such a message is very uncommon when the standard SYSOUT file is used For a permanent SYSOUT file the most common cases are e RC EFNUNKN the external file name has not been found on the specified volume In this case check the file name and media description e RC IOFAIL an I O failure occurred during the OPEN the volume supporting the file may be damaged 47 A2 10UJ 26 1 Messages and Return Codes Directory Result The linkage is not performed Action Correct JCL if relevant or contact the Service Center LK32 02 UNABLE TO CLOSE SYSOUT RC edited return code Meaning The linker failed to CLOSE the report file The reason is given by t
77. Messages 42 TD Messages 43 TN Messages viii 47 A2 10UJ Table of contents 44 TR Messages 44 1 Collector Operator Messages Tr20 cececeeeseeeeeeeeceteeeeeeeeeeaeeeseneeseaeeseaeeeseeeeseaeeseaees 44 1 44 1 1 SICID 4004 MeSSages cccceccceceeeeeneeeteneeeeeeeeseaeeeeaeeteaeeeeeeeeseaeeessaeeseneeenaas 44 1 44 1 2 SICID 4005 Messages ccccceccceseseeeneeeeeeeeeeeeeeeeaeeeeaeeseaeeseeeeseaeeessaeeeseeeneas 44 5 44 1 3 SICID 4006 Messages ccccceccceeeseeeneeeeeneeeeeeeeeeaeeeeeaeeseaeeeeeaeseeaeeeseaeeeseeenaas 44 6 44 1 4 SICID 4007 Messages ccccceecceeeeeeeeneeeseeeeeeeeeeeaeeeeeaeeseaeeeseeeeseaeeseeaeeseneeenaas 44 7 44 1 5 SICID 4009 Messages c ccceccceeeeeeeseeeeeeeeeeeeeeeaeeceaeeteaeesteaesseaeeessaeeeeeeenaas 44 8 44 1 6 SICID 4011 Procedure MeSSage ccccceeeeceeeeeeeteneeeteneeeeeeeeseaeeeseaeeseneeeneas 44 9 44 1 7 SICID 4012 Messages ccccceceeeceneeceneeeeeeeeeeeeeeeaeeeeaeeteeeeeeeeeseaeeeseaeeseneeenaas 44 9 44 2 Extractor Operator Messages TR40 And TR41 ccceeeeeeeteeeeeeeeeeeeeeeeeeeeneeeeeneeeeee 44 11 44 1 1 SICID 400B Messages cecccceeeeeeeeeeeeeteeeeeeeeseaeeeeeeeseaeeeseaeeseeeetnaeeseeeeee 44 11 44 1 2 SICID 400F Messages ccccceeccececeeeeeeeteneeeseaeeeeeeeeseaeeeeaeeseaeeeteaeeeseeenaas 44 13 44 3 Messages From Main Operator Commands TR60 To TR72 ccsccceeesseeeeeeneees 44 14 45 TS
78. NOT ACCESSIBLE RC return code 01 AFTER JOURNAL FILE file_name NOT ACCESSIBLE RC return code 02 Meaning This messsage is printed in the SYSOUT of the recovery step An incident occurred when the file named in EFN was being accessed RYO1 will then appear requesting operator intervention and RY41 will appear again if the file remains inaccessible The occurrence of the incident is indicated as follows 1 during file recovery 1 during the recovery of the After Journal by JRU Action Run the utility FILREST then ROLLFWD to reconstruct the file RY43 ROLLFORWARD NOT PERFORMED FOR FILE FILE NAME UNABLE TO CREATE A FD FOR THIS FILE 01 UNABLE TO ASSIGN THIS FILE RC return code 02 UNABLE TO OPEN THIS FILE RC return code 03 DYNAMIC ROLLFORWARD CANCELLED BY OPERATOR 04 Meaning This message is printed in the SYSOUT of the recovery step Dynamic rollforward cannot be performed because 1 the system cannot create a file descriptor 2 the user file cannot be assigned 3 the user file cannot be opened 2 intervention to make the file accessible has failed Action Run the utility FILREST then ROLLFWD to reconstruct the file RY44 FILE FILE _NAME DYNAMIC ROLLFORWARD NOT SUCCESSFUL NUMBER OF ROLLED FORWARD RECORDS records NUMBER OF ERRORS errors 01 UNABLE TO CLOSE THIS FILE RC return code 02 Meaning This message is printed in the SYSOUT of the recovery step 1 an error has occurred while applying A
79. Network Generation OMH System Output External file name unknown COBOL Status Key value 9N OPEN System Disk File Space Management Utilities WRITER OPEN or START Command OPEN Introduction of Jobs RECEIVE The file with given efn is not found on the specified volume Either correct the ASSIGN JCL statement or allocate the file on the specified volume The file name does not exist on the specified media Check the volume contents The file to be extended does not exist or the file label cannot be found The file does not exist in the given media list The record to update in the error log procedure H_JRNAL_GECP was not found File from remote site is unknown External file name missing Correct JCL efn unknown Check syntax File label not found Empty polling list Table entry or queue is empty No jobs introduced and no jobs in the queue No action required No message in queue No action required The telecommunications dictionary is empty Run the CRNETGEN utility CONS mode requested Internal error Handling IOF The Dynamic Command Table is empty This return code may appear in a message when the modification command MDO of one or more outputs of a job is not successful because of a logical incoherence in the OW queue Contact the Service Center 47 A2 10UJ EMUUNKN 1011 ENDLOGMD 00DE ENQUE 0010 GAC Job Management Sy
80. OAFF Function unbundled 1621 Unblock violation 0021 A value specified in the request has been forced to the lowest authorized limit Job Management Memory Release The working set has reached its minimum value System No action required 0300 Underflow liable to occur PASCAL RTP Various A floating point value has been specified which Operations is too small to be represented in the machine 1E05 Unrecoverable IO termination COBOL Status Key value 30 54 27 Messages and Return Codes Directory UNSTABLE UNUSED UPDCI 54 28 Any File Organization and TDS Availability Control File Management System Nucleus Unit Record Driver Diskette Unit Record Driver Printer 1 29 IDS 0017 GCL RBF 00c1 GAC Any Operation Set Function Mask Set Operating Mode System Disk File Storage and Tape Handling Save and Restore VMM GET OPEN WRITE CLOSE CLOSE Station Management READ START WRITE REWRITE DELETE Unrecoverable I O termination has occurred The disk drive disk pack and system error log should be examined Abnormal termination of the channel program of Set Function Mask Check device accessibility Unrecoverable I O termination Read or write failed Allocate a dummy file for this address Unrecoverable I O error occurred during a read or write operation on a disk volume Contact the Service Center An unrecoverable I O error has occurr
81. OF member name RC edited return code Meaning An old version of the CU being created exists in the library The old version of the program had a secondary entry point with a name cataloged in the CU library as an alias name of the main entry point The compiler is deleting this 47 A2 10UJ 31 7 Messages and Return Codes Directory PAS27 PAS27 PAS28 31 8 alias name An incident occurred while deleting the name which is specified in the message The reason for the incident is given by the return code Result The compiler proceeds but the alias involved is not deleted from the library directory Further consequences can be error PAS22 in the same compilation when the compiler tries to add this name as an alias of the new CU return code ADDROUT at linkage time when this name is referenced Action Use the LIST command of the LIBMAINT CU to check the contents of the library If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center PUT ON SYSOUT LNERR RC edited return code Meaning A record cannot be written in the standard SYSOUT due to a software problem Result The compiler proceeds but the current record is not stored in the report file Action Report the problem to the Service Center PUT ON PRTLIB LNERR RC edited return code Meaning A record cannot be written in the private SYSOUT specified in the
82. Record size is negative Try to allocate a dummy file at this address If possible execute VOLPREP without the NTRKPRF option There is an inconsistency in the USEDSM list Modify this Table entry or queue is not empty Segment is not expandable Either VCAM or MAM has been preloaded and locked in memory thereby stopping the execution of the CNC utility Use the CMM command to cancel the locked segment and rerun the network generation utility No free VMA No more free entries in swap in swap out IOF table Internal error After journal is not accessible After Journal files do not exist or they have not been correctly accessed when GCOS 7 restarted This may occur if the SYS JADIR was not created and managed through the MAINTAIN JAS DELETE and CREATE functions or the disk supporting SYS JADIR could not be accessed when GCOS 7 restarted Unmatch error There is an incorrect value in the FGENVERSION parameter in H_RETOBJ You have tried to map as output a new FGEN V5 structure on a V4 format Specify the new V5 structure as the FGEN output structure then set FGENVERSION 1 in H_RETOBJ 53 13 Messages and Return Codes Directory Load Module Loader Job Management System Nucleus Dynamic Addresser Loader VMM UFAS EXTENDED NO 0013 Dump Analyzer FORMS 53 14 An inconsistency has been found in the reloading table during the loading of a preinitialized step or a step w
83. Result This error is usually detected at step initiation time the step cannot be started Action Change the drive of the resident volume disk Contact the Service Center if necessary DF21 ifn OVERRIDING OF CATALOG JOURNAL OPTIONS FORBIDDEN Meaning A JOURNAL option was specified in a DEFINE statement for a cataloged file which is incompatible with the journal processing option defined in the catalog for this file e g JOURNAL BOTH was indicated in the catalog and JOURNAL BEFORE was specified in the JCL Such overriding is only allowed when the user has the RECOVERY right on the file for security reasons Result This error is usually detected at step initiation time the step cannot be started Action Change the JOURNAL option for the file in either the DEFINE statement or the catalog DF22 ifn NBEFN AND FIRSTVOL OPTIONS ARE INCOMPATIBLE Meaning The NBEFN option which specifies file links on multifile tape volumes cannot be used with the FIRSTVOL option which specifies partial processing of a multivolume file Result This error is usually detected at step initiation time the step cannot be started Action Check the options 47 A2 10UJ 10 5 Messages and Return Codes Directory DF23 DF26 DF27 DF28 DF29 10 6 ifn INVALID CATALOG RANK Meaning Issued during an ASSIGN when the specified catalog rank is not consistent with the previous JCL statement ATTACH Result Error
84. Result This is probably due to a system error Action Contact the Service Center nn CONDITIONAL REQUESTS ARE NOT SATISFIED ON DEVCLASS devclass Meaning This message may appear when the MAX option is used in the JCL statement POOL This message warns the user that the number of devices indicated in the MAX parameter could not be allocated to the pool The minimum number of devices requested has been allocated to the pool Action If more devices than were allocated are required in the pool change the minimum number in the JCL statement POOL REQUESTS BY DVIDLIST MUST BE PERFORMED BEFORE REQUESTS BY DEVCLASS Meaning The system was unable to allocate the devices to a step because the ASSIGN statements specifying device ids DVIDLIST parameter appeared after the ASSIGN statements specifying devclass DEVCLASS Result The step cannot be started Action Correct the sequence of the JCL statements ASSIGN volname IS A RESIDENT VOLUME NOSHARE IS REJECTED Meaning This message is probably due to a system error Action Contact the Service Center CONFLICT IN STEP ACCESSES ON VOLUME volname Meaning Incompatible access mode was specified for the volume indicated between two assignments in the same step For example in a step one ASSIGN statement specified the NVOLWR option another ASSIGN specified the VOLWR option both ASSIGN statements referred to the same volume Result Depending on conditions the step is abort
85. Return Codes Directory TR60 TR62 TR63 44 16 error 40 procedure execution error retcode is h_mtre abnormal retcode Action For error 1 contact the Service Center For error 5 check the system trace collector service job state For error 27 check the XRON value correctly retype the command For errors 37 38 40 contact the Service Center time cmd_name COMMAND REJECTED SYSTEM TRACE COLLECTOR IS NOT STARTED Meaning The command requires the system trace collector to be started Action Check system trace collector service job state time DSYSTR SYSTEM TRACE DOMAIN tdom_id BUFFER bfr id WAIT wait_yn CND INT cls cnd CLASS cls name WHERE cls_where Meaning The message displays the trace domain attributes as follows tdom_id system trace domain name bfr_id system trace buffer name connected to the domain waiy_yn values may be YES NOT depending on domain WAIT attribute cls_name system trace class filter names NOR DET TRM INR IDT CND DTV ABN ARC TRP TDP cls_where for each class filter state may be MEM for a trace in memory F for a trace in memory and save buffer page in trcfile class filter is closed Action None Error Message The TR63 error message has eight variations they are given below 47 A2 10UJ TR63 TR63 TR63 TR63 TR63 TR63 TR63 TR63 TR72 TR72 47 A2 10UJ TR Messages NO TRACE DOMAIN FILTER EVID ev
86. SPRVT TDS tds ERROR LEVEL erlvl DETECTED BY SUPERVISION OF SESSION PROCESS Unsolicited message sent by the supervision manager cmdnm NO SPAWNED TRANSACTION ON THE SPECIFIED USER Response to OCPOOL MDCPOOL for xcp1 dummy cor cmdnm cornm CONNECTED NOT CONNECTED REASON reason Response to OCPOOL MDCPOOL for xcp1 dummy cor TDS tdsname HOST GATEWAY gateway name BOOTED BY BOS TP applid Meaning Issued each time a boot request is received from TUXEDO Action None Type Informative TDS tdsname HOST GATEWAY gateway name SHUTDOWN BY BOS TP applid Type Informative Meaning Issued each time a shutdown request is received from TUXEDO 47 11 Messages and Return Codes Directory TX81 TX90 TX90 TX91 TX92 TX93 TX94 47 12 Action None TDS tdsname HOST GATEWAY gateway name RECONNECTED BY BOS TP applid Type Informative Meaning Issued each time a RECONNECT request is received from TUXEDO Action None DESYNC XAEVT TPR tprnm USER usernm TDS_XA STATUS tdsxast XA GLOBAL STATUS xagblstat Action Desynchronization has been detected in the XA protocol and asynchronous resynchronization has been launched TDS_XA_STATUS indicates whether TDS took the decision to roll back or to commit the desynchronized CU to assist the database administrator in taking a heuristic decision RESYNC XAEVT TPR tprnm USER usernm TDS_XA STATUS tdsxast XA GLO
87. STEP Meaning ACCESS READ is mandatory for WORKFILE DU98 SERVER NOT ACTIVE Meaning A dynamic save has been launched DYNSAVE or H_SAVE_FILE and there is no dynamic save server active SDYNSVR DU94 SERVER TERMINATION RUNNING BYPASS POP SERVER TERMINATION RUNNING BYPASS VOP Meaning Synchronization instructions are bypassed when the TERMINATE operation is running It may be after a TDYNSVR GCL command normal or after an abort of the dynamic save server abnormal DU98 DU98 H_DFLASG H_WRKFIL Meaning Abnormal Return Code of the given primitive 47 A2 10UJ 12 17 Messages and Return Codes Directory DU98 DU98 DU98 DU98 DU98 DU98 12 11 DU99 DU99 DU99 DU99 DU99 12 18 H_OPEN H_WRKFIL Meaning Abnormal Return Code of the given primitive H_RWOPEN H_WRKFIL Meaning Abnormal Return Code of the given primitive LOCKED POP TURBOCONFIG Meaning Internal error NOT AVAILABLE TURBOCONFIG Meaning Internal error IFN NOT FOUND IN IFNLIST STATUS FF Meaning Internal error EXCEPTION IN MODULE H_DFSRD_WAIT Action Indicate the module where the exception has arisen Module H_Gac_lnitsv ABNORMAL RC FROM FICB Return code Meaning Internal error LKIDTAB PAGE POINTER NULL Meaning Internal error WRONG STEP ENTRY STATUS Meaning Internal error XRON TO WAIT FOR Xron Meaning At the beginning of the save the server waits for the end of the c
88. STRUCTURE Meaning The contents of the directory are inconsistent The remaining part of the block has been cleared Result Some entries may be lost Processing continues Action Contact the Service Center ifn UNSUCCESSFUL DIRECTORY FORMAT SWITCHING Meaning The switching of the directory format has failed Result The file cannot be opened and an abnormal return code is set Action Such a message normally indicates a system error Contact the Service Center ifn CANNOT FORMAT FILE MAXIMUM SIZE ALLOWED IS n Meaning The specified size is too large the Block Allocation Map cannot be built Result The file cannot be allocated Action Reduce the file size to the given value ifn ENTRY INSERTED IN DIRECTORY OVERFLOW Meaning An entry has been stored in the directory overflow area Result Performance degradation when searching for or creating an entry Action Reallocate the library with a larger value for DIRSIZE or MEMBERS Message Descriptions For FBO Systems MOUNT ALL OPTION IS MANDATORY Meaning All volumes of a queued file must be on line at OPEN time Result The file cannot be opened and the abnormal return code MOUNTERR is sent Action Correct the JCL statement ASSIGN MOUNT keyword 47 A2 10UJ QL Messages QLO2 SHARE MONITOR NOT SUPPORTED ONLY DIR OR NORMAL ALLOWED Meaning GAC is not available for QUEUED files thus a SHARE MONITOR option found either in the JCL statemen
89. SYNCOMP 00B7 SYNONYM 00E1 UFAS and UFAS CLOSES IRM specific Task Management Station declared under test by MLA Result too big when ARG gt 251 Result too small when ARG less than 260 Subfile reference out of bounds Invalid subfile reference Overflow in summation field Area s already swapped The job or process is currently swapped out from main memory Process is presently swapped out from main memory Internal error Synchronization mode error Synchronisation mode error The requested synchronisation mode is invalid Request for synchronisation operation handled by RWI when the semaphore is reserved by the user specified when the session was opened passing of a sepmaphore during an asynchronous transfer request when the semaphore is implicit to RWI no semaphore specified when the session was opened primitive H_RWWAIT called when the semaphore is explicit specified when the session was opened or redefined during an asynchronous transfer request primitive H_RWCHECK called when the semaphore is implicit to RWI Complementary record is accessed through a secondary record Something else has the same name COBOL Status Key value 02 WRITE EXTENDED Indexed REWRITE Disk Files With Secondary Keys 54 18 One or several valid secondary key duplicates are created 47 A2 10UJ READ SYSOV 1202 Catalog Management ATTACH GAC Lock L
90. System error or no information can be returned regarding the given media No device type is given No device name or volume name is given No device name is given and the device type is not a disk diskette tape nor cartridge No device attributes are given for disks specified by their volume names Incomplete device attributes for a cartridge on multi model sites model name is missing The volume name is unknown The volume is NSTD out of NV scope 47 A2 10UJ 47 A2 10UJ DVMGT 12 DISABLED DVMGT 12 STANDBY DVMGT 12 WRONGDV DVMGT 13 WRONGDV DVMGT 14 ENQUE DVMGT 14 MDNAV Device Management Return Codes in More Detail The volume name is known but the volume is not allocated and the device is OUT STANDBY or in AVR for a non ALONE MIRROR disk both copies are OUT STANDBY or in AVR The volume name is known but the device is allocated in device mode The device name is unknown A volume with the specified volume name is not mounted on the specified device Only incomplete information can be returned about the given media The device exists but is OUT for a non ALONE MIRROR volume not requested by T amp D both copies are OUT or one is OUT and the other is unknown STANDBY or in AVR Only incomplete information can be returned about the given media The device exists but is not allocated and STANDBY or DISMOUNT MEDIA or in AVR or the volume is NSTD o
91. TDS Master PROCEDURE NOT FOUND Meaning The procedure for transaction initialization was not found as requested in TDSGEN Action Check the TDSGEN report file and re run the TP7GEN utility to include this procedure in the TDS load module This error does not prevent the TDS application from executing Type of message Warning Dump taken No Recipient of the message Main Operator UNABLE TO GET ADDRESSABILITY TO TDS ERROR PROCEDURE Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master ERROR WHILE READING FILE CONTROL STRUCTURE Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master 47 A2 10UJ MU and MV Messages MU46 XXXXXXXX SCHEMA STRUCTURES NOT AVAILABLE Action Ensure that the named schema is correctly declared If necessary recreate TDSGEN to correct the error When the USE IDS SUB SCHEMA is used in the STDS ensure that the schema corresponds to a Full IDS II schema Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU47 ABORT DURING WARM RESTART NEXT RESTART IS COLD Action None The system encountered a fatal error during the recovery processing and restarts cold without shutdown Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master MU48 INTERNAL
92. TRCBUF definitions in the collector initialization file Check the collector initialization commands A define TRCBUF without TE keyword in the collector initialization file Check the collector initialization commands Incorrect TE page size word for a TRCBUF in the collector initialization file Check the collector initialization commands A TRCBUF trace event buffer page size is not 2 4 8 16 in the collector initialization file Check the collector initialization commands An incorrect TRCBUF memory classes status word in the collector initialization file Check the collector initialization commands An incorrect TRCBUF file classes status word in the collector initialization file Check the collector initialization commands A class has both mem and file status or TDP class status is mem on a TRCBUF command in the collector initialization file Check the collector initialization commands 47 A2 10UJ 47 A2 10UJ 4004 18 ARGERR 4004 19 ARGERR TBL NE 4004 20 ARGERR 4004 21 ARGERR 4004 22 ARGERR 4004 23 ARGERR 4004 24 ARGERR 4004 25 ARGERR 4004 26 ARGERR 4004 27 ARGERR 4004 28 ARGERR 4004 29 ARGERR 4004 30 ARGERR 4004 31 ARGERR TR Messages Incorrect wait attribute on a TRCBUF command in the collector initialization file Check the collector initialization commands TRCBUF command without TD keyword in the collector initialization file Check the collector initialization commands Inc
93. TWCOMMSUB and the OWNER lt Rxxxx gt UNABLE TO ASSIGN ACCESS RIGHTS VIOL Always followed by a TW09 message Who receives the message The SUBUSER lt Rxxxx gt UNABLE TO ASSIGN ACCESS RIGHTS VIOL ON ENVIRONMENT LIBRARY Always followed by a TW11 message Who receives the message The SUBUSER 46 5 Messages and Return Codes Directory Twos Twos Twos Twos Twos Twos Twos Twos 46 6 UNABLE TO ASSIGN ACCESS RIGHTS VIOL ON ENVIRONMENT LIBRARY Sent in case of PTEST processing Who receives the message The TWCOMMSUB and the OWNER lt Rxxxx gt UNABLE TO OPEN UNKNOWN FILE Always followed by a TW09 message Who receives the message The SUBUSER lt Rxxxx gt UNABLE TO OPEN UNKNOWN ENVIRONMENT LIBRARY Always followed by a TW11 message Who receives the message The SUBUSER UNABLE TO OPEN UNKNOWN ENVIRONMENT LIBRARY Sent in case of PTEST processing Who receives the message The TWCOMMSUB and the OWNER lt Rxxxx gt UNABLE TO OPEN lt retcode gt Always followed by a TW09 message Who receives the message The SUBUSER and possibly the TWCOMMSUB depending of the return code lt Rxxxx gt UNABLE TO OPEN_ENV lt retcode gt Always followed by a TW11 message Who receives the message The SUBUSER and possibly the TWCOMMSUB depending of the return code UNABLE TO OPEN_ENV lt retcode gt Sent in case of PTEST processing Who receives the message The TWCO
94. TX MANUALLY NON CONCURRENT WITH TX MANUALLY NON CONCURRENT WITH ALL TX USE DEFERRED UPDATES EXCEPT FOR Response to 1 DISPLAY TX spec tx FSEC 2 DISPLAY TX spec tx AUTHCODE 3 DISPLAY TX spec tx FSEC FSHRD TXNCONC FSCAC DISPLAY TX spec tx FSHRD DISPLAY _ TX spec tx FSCAC DISPLAY _ TX spec tx TXNCONC DISPLAY _ TX spec tx TXNCONC 4 5 6 7 8 DISPLAY TX spec tx FSEC YS ry WH TX14 txnm1l txnm2 txnm3 txnm4 txnm5 txnm6 Response to DTX TX15 ifnl ifn2 ifn3 ifn4 ifn5 ifn Response to DTX file options or LSTF DTLD 0 TX16 LOCKED TRANSACTION lock value N FOR DEBUG TX validate value Y N FOR INQUIRY TX inquiry value Y N HIDDEN IN MENU TX hidden value y N Response to DISPLAY TX spec tx TX17 entry tabulation where entry tabulation is 47 A2 10UJ 47 3 Messages and Return Codes Directory 1 IFN OPEN MONITORED PMD 2 ifn open monitored pmd Response to 1 LSTF startx DTLD 2 LSTF DTLD TDS tds date_time heading where heading is 1 LIST OF CLOSED FILES 2 LIST OF FILES 3 LIST OF OPENED FILES Response to 1 LSTF OPENED 0 2 LSTF 3 LSTF OPENED Tx18 TDS tds date_time heading where heading is 1 LIST OF CLOSED FILES 2 LIST OF FILES 3 LIST OF OPENED FILES Response to 1 LSTF OPENED 0 2 LSTF 3 LSTF OPENED TX19 XCP2 HEURISTIC COMMI
95. The message gives the return code returned by the system and also gives the ifn of the file concerned The following convention is used lt ifn gt H_ lt keyword parameter gt E g H_INLIB2 means the file specified in the INLIB2 parameter of the LIB JCL statement When the incident occurred while reading a source line the message gives the name of the program and the line number of the line being processed The error may be a system error or a user error Return code EFNUNKN indicates a user error the user specified in the INFILE parameter a file that does not exist on the specified volume Return code MDNAV indicates that the operator refused to mount the volume supporting the file Usually another message is also available either in the JOR or in the compiler report which gives a simple explanation of the error Result In most circumstances the compilation is aborted Action Correct the error if relevant or contact the Service Center RDN11 ERROR WHILE PROCESSING OPTION STRING RC edited return code Meaning Software problem in the management of the OPTION segment which must receive the translated compiler options Result The compilation is aborted Action Report the problem to the Service Center 36 2 47 A2 10UJ RDN Messages RDN12 ERROR WHILE PROCESSING OPTION STRING PARAMETER jcl parameter APPEARS TWO OR MORE TIMES Meaning Inconsistency in compiler options delivered to the RDN modul
96. V_R_ DNODENOP NOTDONE return code from dictionary when retrieving destination node name in case of remote initiator Reason V_R DNODENOP 47 A2 10UJ 47 A2 10UJ 34 QC Messages General Environment QC messages are produced by an MCS Message Control System application or by the QMAINT Queue Maintenance utility QC messages are documented in the Network Operations Reference Manual 47 A2 72UC 34 1 Messages and Return Codes Directory 34 2 47 A2 10UJ 35 QL Messages General Environment QL messages are produced when library files are used In every message the user is provided with the internal file name ifn through which the library is accessed by the program Pertinent Manuals BFAS User s Guide nthi ea esses i ie a fade hd eas 47 A2 02UF ICL SCV S Guid EEE AEE a etek nh AE ER 47 A2 12UJ 35 1 Message Descriptions For VBO Systems QLO1 IFN QLO2 IFN 47 A2 10UJ ifn OPTION MOUNT ALL IS MANDATORY Meaning The value indicated in the MOUNT parameter of the JCL is less than the number of volumes in the volume list for a library file and all the volumes supporting a library must be mounted Result The library cannot be opened The abnormal return code MOUNTERR is set Action Modify the JCL In some cases the use of device pool facilities can minimize the device utilization Refer to the JCL User s Guide ifn INVALID SHARING LE
97. a session is closed this counter must be zero Lock protocol violation There is an error in the locking protocol Check the file define parameters Batch IQS or the MESSAGE statements TDS Statistical read requested for a TDS file specified without SUPPRESS CONCURRENT ACCESS CONTROL A long wait may be needed before a resource becomes available The waiting time for a CI exceeds the value specified in the GAC Configuration Statement and the Commitment Unit is aborted The Commitment Unit is automatically restarted when the CI becomes available List Quota VIOLation An attempt to allocate space on a list of volumes is not allowed by the quota manager Label type does not match An unstable UFAS file has been opened under UFAS EXTENDED This may be an indexed file with secondary keys for which no SORTIDX has been performed Recover the file under UFAS Run SORTIDX if necessary 47 A2 10UJ MATHARG 1A7F Mathematical Package MATHERR 1A00 1AFF MBXSAT 0A30 MCRDFAIL 0485 MCWRFAIL 0486 MDERR 181D DMU FILLIST File Management Format Conversion System Disk File Storage and Tape Handling File Space Management Utilities Save and Restore MDNASG 0908 47 A2 10UJ Disk File Address IONOP to RESIDENT Return Codes Not normalized argument when calling a mathematical function Non normalized floating point argument when calling a mathematical function ARG Error when c
98. a move operation COBOL Status Key value 9T Dump Analyzer File Management File Space Management Utilities The DPAN file has been truncated The action to be taken depends on the contents of the file The output file to be restored by the FILREST or FILDUPLI utility is too short Extend the file automatically by specifying the OUTALC parameter Save and Restore There is not enough space in the existing output GCL Job Management Mailphore System OMH Message Management Compound Messages PASCAL RTP READ 54 24 file to restore or duplicate a file Use a larger output file or extend the current file using the OUTALC or EXTEND parameter Truncation has occurred because the length of the result was greater than the length of the recelving area Message truncated because larger than maximum size The output buffer too small to contain the message or a message is truncated as the mailbox has overflowed H_LISTIOF macro Temporary overflow in tables or other problem with handling tables The floating point data which has been read has too many significant digits 47 A2 10UJ RWI Services TDS UFAS EXTENDED UFAS BFAS Tape Unit Record Driver Printer TSKUNKN 1001 GPL System Nucleus TYPEERR 1809 47 A2 10UJ Tabulation Handling XCP2 READ WRITE Requests on External Task Task Management RESNAV to YETALLOC Return Codes Truncation has occurred Multi
99. are equal to zero N U ull vector Jndefined function ARG gt 56 overflow Negative argument ARG gt 57 53 overflow ARG almost a negative integer ARG 0 ARG less than 57 53 underflow ARG almost zero ARG is a negative integer ARG less than 1 ARG almost a negative integer Function undefined ARG less than 100 undefined ARG gt 56 overflow 55 15 Messages and Return Codes Directory 1A44 DFACNG 1A45 DGAMOV 1A46 DGAMNGA 1A47 DGAMZR 1A48 DGAMUN 1A49 DGAMZRA 1A4A DGAMNG 1A4B DLGMNG 1A4C DLGMNGA 1A4D DLGMUD 1A4E DLGMUN 1A51 QFACOV 1A52 QFACNG 1A53 QGAMOV 1A54 QGAMNGA 1A55 QGAMZR 1A56 QGAMUN 1A57 QGAMZRA 1A58 QGAMNG 1A59 QLGMNG 1A5A QLGMNGA 1A5B QLGMUD 1A5C QLGMUN 1A5D SEXPUN 1A5E DEXPUN 1A5F QEXPUN 1A60 SPWRUN 1A61 DPWRUN 1A62 QPWRUN 1A63 SPWROV 1A64 DPWROV 1A65 QPWROV 1A66 SCSHOV 1A67 DCSHOV 1A68 QCSHOV 1A69 SSIHOV 1A69 SSIHOV 1A6A DSIHOV 1A6B QSIHOV 1A70 CSTHPREC 1A71 CDTHPREC 1A72 CQTHPREC 1A73 CSTNPREC 1A74 CDTNPREC 1A75 CQTNPREC 1A76 CSATANOV 55 16 Negative argument ARG gt 57 53 overflow ARG almost a negative integer ARG 0 ARG less than 57 53 underflow ARG almost zero Negative argument Negative argument or zero ARG almost a negative integer Undefined ARG less than 150 underflow ARG greater than 56 overflow Negative argument ARG greater than 57 53 overflow Argument is almost a negative integer Argument is zero ARG is less t
100. area name index index name cannot be used because the associated JCL statement ASSIGN with ifn ifn specified a file which does not exist on the specified volume Result In a Batch environment the step execution is aborted Action Check the JCL statement ASSIGN 47 A2 10UJ 9 15 Messages and Return Codes Directory DDM00419 lt error localization gt INSUFFICIENT BUFFER MEMORY FOR THE FILE ASSIGNED TO IEN ifn SCHEMA AREA area name INDEX index name Meaning The number of buffers specified either in the DMCL or in the IDS run time options is too low to satisfy the file needs Result In a Batch environment the step execution is aborted Action Specify a higher value for number of buffers DDM00420 lt error localization gt READY USAGE MODE OF FILE ASSIGNED TO IEN ifn SCHEMA AREA area name INDEX index name IS INCONFLICT WITH ASSIGN SHARE ACCESS OR DEFINE JOURNAL READLOCK PARAMETERS Meaning There is an incompatibility between the sharing mode and access modes specified both in the program READY statement and in the JCL or the catalog SHARE ACCESS READLOCK JOURNAL parameters Detailed explanations on sharing modes and access modes can be found in the JDS I User s Guide Result In a Batch environment the step execution is aborted DDM00422 lt error localization gt THE DATA BASE FILE ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name IS IN TRANSIE
101. because it is already in the system or because it was set by the PMM command Internal error Reference has been made to a null pointer There is an inconsistency in the GT Writer tables GT Writer is aborted System initialization error Pointer found null in the journal tables Send the PRLOG log to the Service Center The fault descriptor points to a null pointer and not to a name string Modify the user code 53 21 Messages and Return Codes Directory NUMBLERR 1834 RWI NVACANT 0C00 NVOLOV 1215 Journalization System Output CLOSE OBJ1UNKN 1018 OBJ2UNKN 1019 OBJTPERR 186C Catalog Management IDS I Access IOF SWI Network Generation System Nucleus Automatic Resource Manager 53 22 Erroneous number of blocks The number of blocks specified during a multiple file transfer operation is incorrect It is zero or greater than the MAXNUMBLOCK value specified or is different is different from that deduced by addition of NUMBLOCK values in the transfer addresses descriptor table After sending this return code the buffer memory table is altered and this mechanism cannot be used for the next request Table entry or queue is not vacant Number of volume overflow The list of volumes for the TDS journal is greater than 4 File on more than maximum permitted number of volumes Object1 unknown on volume Object2 unknown on volume Incorrect object type The catalog object
102. checkpoint a remote file Not implemented Attempt to use a site although RBF facilities not present on machine ST was not issued GTWriter is not running The primitive invoked does not perform the required action Organization is integrated but user not in IDS II Sequential access Sequence mode not allowed here The terminal has not got the required input capabilities There is no SWI in Batch Tabulation not possible on this terminal IOF not implemented for multiprocesses 47 A2 10UJ Job Management Journalization Network Generation PASCAL RTP PCF RBF Station Management Assign Open Remote File RWI Dynamic Addresser System Nucleus Loader System Output TDS 47 A2 10UJ Master Command DATANAYV to IOFAIL Return Codes CHKPT RES Call Checkpoint not taken because of error condition 1 The file to roll back is not a disk file 2 The required function is invalid Send the PRLOG log and UFAS trace to the Service Center 3 After Journalization not supported for files cataloged in not cataloged private catalog The function requested is not available due to the state of the controller Check the state of the controller with the DNET and DTSVR command and try again Direct access from EOF has been attempted This function is not yet implemented 1 The Program Checkout Facility cannot save the execution context before a checkpoint 2 The Program Checkout Facil
103. close during h_trcextr exit routine execution NO RECORD SINCE PREVIOUS EXTRACTION Meaning The System Trace extractor has been launched but there are no new trace records to extract since the last extraction was performed Action None Messages From Main Operator Commands TR60 To TR72 Error Message The TR60 error message has seven variations given below time cmd_name COMMAND COMPLETED Meaning correct execution of system trace operator command Action None time cmd_name COMMAND REJECTED SYSTEM TRACE IS NOT IN CONFIGURATION Meaning The system trace facility is not active during this GCOS session Action Restart a new GCOS session with the ISL command TRC ON time cmd_name COMMAND REJECTED ILLEGAL ACCESS RIGHTS Meaning This command is reserved for the main operator Action Consult the main operator time cmd_name COMMAND REJECTED ARGERR er_nbr Meaning There is an incorrect command argument depending on the er_nbr value TBL NE argerr 6 DSYSTR incorrect argument set 47 A2 10UJ TR Messages argerr 7 DSYSTR option must be F or more than one of BUFFER TDOM OPTION is used argerr 8 ISYSTR incorrect argument set argerr 9 MSYSTR incorrect argument set argerr 10 MSYSTR from_evid gt to evid or evid gt 4095 argerr 11 MSYSTR incorrect option argument argerr 12 MSYSTR empty argument set argerr 13 SSYSTR incorrect argument set argerr 14 SSYSTR incorrect use of option C a
104. code ifn AT LEAST ONE SUBFILE SIZE HAS BEEN UPDATED Meaning This is a warning message The size of at least one subfile has been changed Result The file is now coherent Some data may have been lost ifn SUBFILE IDENT REORGANIZATION COMPLETED Meaning The reorganization of subfile identifiers an intermediate phase of FILCHECK is complete 35 7 Messages and Return Codes Directory QL49 QL53 QL54 QL55 QL56 QL59 35 8 IFN IFN IFN IFN IFN IFN Result The subfile identifiers are reorganized Action None ifn SUBFILE IDENT REORGANIZATION TERMINATED Meaning The reorganization of the subfile identifiers could not be completed due to some reason given in an error message Result The subfile identifiers have not been reorganized Action Depends on the return code ifn UNEXPECTED DIRECTORY STRUCTURE IN BLOCK NUMBER n Meaning A directory block does not have a directory structure it has been changed to zero Result All the entries in this directory block are cancelled Some information may have been lost ifn ALL ENTRIES CANCELLED IN BLOCK NUMBER n Meaning A directory block does not have a directory structure it has been changed to zero Result All the entries in this directory block are cancelled Some information may have been lost ifn ONE SEGMENT CANNOT BE CREATED Meaning There is not enough memory available to run FILCHECK Result On
105. control interval must be purged Truncation has occurred in a move operation Synchronization must have occurred before that service can be requested Value out of bounds Run occurrence number out of bounds Index out of bounds Subfile reference out of bounds 47 A2 10UJ 47 A2 10UJ 0804 0805 0900 093F 0902 0903 0904 0905 0906 0907 0908 0909 0940 0960 0980 0A00 OAFF 0A01 0A02 0A03 0A04 0A05 0A06 0A07 0A08 0A09 0A0A 0A0B 0A0C 0A0D 0A0E OAOF 0A10 0A11 0A12 0A13 0A14 0A15 0A16 0A17 0A18 0A19 OAIA 0A1B 0AIC 0A1D 0A20 ADDROUT RANGEOUT NASSIGND FILENASG DVNASG TERNASG ECBNASG BUFNASG ECPNASG MDNASG IFNNASG ABTPRC FORMRCVY USEREQ NAVAIL FWNAV DVNAV MDNAV TERNAV FUNCNAV FLNAV ITMNAV IRNAV CPYNAV BUFNAV PCSNAV TMRNAV OPSTNAV FLNMNAV SPACENAV IFNASG IFNDEF ERROPNAV GENNAV SGNAV RESNAV SMNAV DATANAV SCIDXNAV WDNAV VMANAV KSNAV CINAV FILEMIG PATHNA Return Codes Listed in Numerical Order Address out of bounds Cannot be assigned Entity not assigned to the process group File not assigned Device not assigned Terminal not assigned Event control block not assigned Buffer not assigned ECP not assigned to ECB Media not assigned No entity assigned to the internal file name Abort the current running process Form recovery needed User request for an abort Entity not available down locked Firmware function not available Dev
106. current one e The current ASSIGN statement does not contain the ifn and is not preceded by an ASSIGN statement e External files to be concatenated have incompatible characteristics e g disk file and printer Result This error is usually detected at step initiation time the step cannot be started Action Check the JCL ifn ATTEMPT TO ASSIGN RESIDENT VOLUMES WITH EXCLUSIVE USE Meaning This message usually appears in the following situations e Avolume is requested on a specific drive DVIDLIST parameter of the ASSIGN statement but this volume is resident on another drive e Avolume is requested on a specific drive DVIDLIST parameter of the ASSIGN statement but the resident volume is already mounted on this drive Result This error is usually detected at step initialization time the step cannot be started Action Correct the JCL avoid requests by device name DVIDLIST parameter 10 3 Messages and Return Codes Directory DF11 DF12 DF13 DF14 DF15 DF18 10 4 ifn ifn ifn ifn ifn ifn NO VOLUME DEFINED Meaning This message is issued during a dynamic file ASSIGN when the given media list is empty Action Correct the GPL program ENTITY STILL ACTIVE Meaning Issued during a dynamic file ASSIGN or ALLOCATE or DEASSIGN requested for a file which is still open or assigned Action Correct the GPL program ERRONEOUS NUMBER OF VOLUMES IN MEDIA PA
107. declaration primitives have been used incorrectly IFN violation Illegal file access invalid file or file not open Check access rights on file ring Attempt to open or close a TDS system file Check the IFN TDS system files cannot be accessed with Open or Close verbs or commands 52 31 Messages and Return Codes Directory IGNORE 0005 Availability Control Set Function Mask Set Operating Mode FORMS GCL GTWriter IRM Journalization PASCAL RTP Various Operations UFAS and UFAS EXTENDED ILLBAERR 0202 ILLCPHDR 1C27 ILLLDN 1894 ILLRECOV 1714 UFAS EXTENDED ILLSEM 04C6 Physical I O Access PCF System Nucleus Task Management ILSTREQ 1E26 52 32 Do not take any action Device does not accept a set function mask Combination of DONEIDC and some other erroneous condition This is a warning indicating that the result of the function is to be ignored Inconsistency in the GT Writer tables GT Writer is aborted Job is not an IRM subject The file being opened has a non standard label An attempt has been made to use the PAGE procedure This is ineffective SORTIDX has been requested for a file with no secondary keys Illegal base register Illegal channel program header Illegal logical device number Illegal recovery An illegal recovery UFAS lt gt Journal has taken place Illegal semaphore Erroneous semaphore address During Remote Batch Debugging the Pro
108. dialog with the terminal A wait for reconnection is possible An RWI input output request abnormally terminated Send the PRLOG log to the Service Center Abnormal I O termination Hardware I O error Hardware I O error T O operation failure Abnormal termination of E S The detailed causes for the abnormal termination are given in the IO_STATUS field System Interface WithInitiation of SORT Software I O failure The work files have not COBOL SORT Process UFAS EXTENDED UFAS BFAS Tape START Unit Record Driver GET PUT Diskette OPEN Printer Direct Print WRITE ASSIGN Unit Record Driver OPEN Printer been opened successfully An attempt has been made to execute a primitive after a file creation has terminated abnormally This may be an internal error T O error during positioning Re run current step T O error due to system error Inform Service Center T O error usually caused by user Check media definition or contents of SYS URCINIT A software error has occurred during the initialization of a unit record device System error Inform Service Center 47 A2 10UJ 47 A2 10UJ VCAM Internal WRITE CLOSE RECEIVE DATANAYV to IOFAIL Return Codes A software error has occurred during an I O operation Check margin and line length some lines may have been lost Mass storage read error next message in queue cannot be received 52 37 Messages and Re
109. encountered by system File must be restored e g from a previous FILSAVE Hardware problem on Main Console Inform Service Center An integer or real data that has been read was incorrectly specified Correct the data in the TEXT field Erroneous contents of block received Transmission aborted There are more than 2 147 483 647 SORT records Reduce the sort input and possibly execute it with several SORT MERGE steps 47 A2 10UJ TDS TPR Operation UFAS EXTENDED Unit Record Driver PUT Diskette ABNCCAD to DATALOSS Return Codes Database inconsistency possibly due to suppression of GAC There is incoherence in a data CI Recover the file Data error in I O DATAGAIN 0435 Initial amount of data input but data limit not reached data FORMS SORT MERGE gain A system error has occurred during folding data to send again Contact the Service Center Some sorted records are unexpected Re execute the SORT step with DEBUG or the CHECK keyword in the FUNCTION PARAGRAPH of DSL or with X 0 or X 02 value in the second byte of the SRTDEF_FILLER7 field for a subroutine sort call together with DUMP DATA at STEPOPT or STEP level in JCL GCL Then contact the Service Center System Interface With Reading of Sorted End of data has not yet been reached but the COBOL SORT DATALIM 0027 Records RETURN number of sorted records returned is already equal to the number of records sent for so
110. error Result Processing stops Messages in the JOR indicate which units have been processed Action Contact the Service Center VMM FAIL VMFCL RC edited_return_code Meaning There is a problem with the management of the Virtual Memory File used by MACPROC The return code indicates the reason Such a message indicates a system error Result Processing stops Messages in the JOR indicate which units have been processed Action Contact the Service Center VMM FAIL VMLKAC RC edited_return_code Meaning There is a problem with the management of the Virtual Memory File used by MACPROC The return code indicates the reason Such a message indicates a system error Result Processing stops Messages in the JOR indicate which units have been processed Action Contact the Service Center A BREAK OCCURRED NO EXPANSION PRODUCED FOR input_file efn input_unit_name Meaning The user has performed a break in interactive mode Result Processing stops Messages on the screen indicate which units have been processed Action None PREVIOUS OUTPUT MEMBER DELETED CHNAME FOR output_unit_ name RC edited_return_code Meaning To preserve the old member if an error occurs during processing the new expanded member of the output library is created with a temporary name If processing is successful the old member is deleted and the new member is renamed In this case an error has occurred during the renaming of the member The retur
111. error 8420 Underrun overrun 8480 Data Errors Error data field 8808 Error key field 8810 Error count field 8820 Missing address 8840 marker PSI error 8880 Data Device Check R W into index mark 8980 47 A2 10UJ Completion Codes for I O Errors Comments May indicate a bad track or a drive error retry with another drive Change drive System at fault or channel program error Put the drive in write mode Count error in data transfer Device fault change drive Hardware interface fault change drive May indicate a missing record because of a bad track Hardware interface change the drive used System fault A 5 Messages and Return Codes Directory 47 A2 10UJ Vos remarques sur ce document Technical publications remarks form Titre Title Messages and Return Codes Directory N R f rence Reference No 47 A2 10UJ Rev11 Date Dated February 2005 ERREURS DETECTEES ERRORS IN PUBLICATION ee AMELIORATIONS SUGGEREES SUGGESTIONS FOR IMPROVEMENT TO PUBLICATION ee Vos remarques et suggestions seront attentivement examin es Si vous d sirez une r ponse crite veuillez indiquer ci apr s votre adresse postale complete Your comments will be promptly investigated by qualified personnel and action will be taken as required If you require a written reply furnish your complete mailing address below NOM NAME DATE SOCIETE COMPANY ADRESSE AD
112. explanation already provided Dump Analyzer The dump has not been performed because an error has been detected at editor level or there is an error in the PRTFILE Reassign the PRTFILE using the PRTFILE command Dynamic System Request not performed Display 53 17 Messages and Return Codes Directory NOTED NOTOBS 53 18 GAC EXTENDED _ Cleanpoint Restart Returned when the File Access Method returns a GTWriter Network Generation System Output WRITER or SYSOUT TDS XCP2 UFAS EXTENDED normal return code which is not DONE or DATALIM Syntax error in input data of GT Writer generation Generation is not performed NETGEN ends abnormally but any running configurations are preserved Run the CRNETGEN utility Request not taken into account by system Attempt to open or close an IDS schema when the DBS is not started Check the IFN or state of the corresponding DBS Abnormal processing of an XCP2 verb Refer to the CPI C XCP2 User s Guide OPEN CLOSE invalid error management Contact the Service Center 00E0 Request taken into account Job Management Any Operation on Job number unknown No action required a Process Group Recoverable by the system 1c0A Not obsolete COBOL Status Key value 30 BFAS UFAS Tape OPEN Catalog Management CATDELET File Management System Disk File Storage and Tape Handling File cannot be created because tape contains a file whose retention date is still
113. file structure is not correct Verify file identification if valid clear file Extraction input system trace circular file structure is not correct Verify file identification if valid clear file 47 A2 10UJ TR Messages 400B 18 OBJTPERR Extraction input system trace circular file structure is not correct Verify file identification if valid clear file 400B 19 OBJTPERR Extraction input system trace circular file structure is not correct Verify file identification if valid clear file 400B 20 OUTSEQ Extractor input system trace circular file has incorrect records sequence number monotony The complete sequential copy of the file is done 400B 21 OUTSEQ Extractor input system trace circular file has incorrect records sequence number monotony The complete sequential copy of the file is done 400B 22 h_get abnormal return System trace circular file access error no record code extraction is performed 400B 23 h_get incorrect return System trace circular file access error the code requested extraction is not performed 400B 24 h_close incorrect System trace circular file close error return code 400B 25 h_get incorrect return System trace circular file direct access error the code extraction may be incomplete 400B 26 h_get incorrect return System trace circular file sequential access code error the extraction may be incomplete 400B 27 h_get incorrect return System trace circular file first record read e
114. files Meaning This message is printed in the SYSOUT of the recovery step Dynamic rollforward cannot be performed since the After Journal files cannot be read Action None jasname recovery SUCCESSFUL Meaning This message appears in the JOR and the SYSOUT of the Recovery Step The step has successfully terminated allowing switching of jasname JAS Action None jasname recovery failed Meaning This message appears in the JOR and the SYSOUT of the Recovery Step An error preventing recovery has occurred with a result that jasname JAS cannot be switched 47 A2 10UJ RY Messages Action See H4 type JAS and Recovery in the File Recovery Facility User s Guide ry52 jasname message UNKNOWN rc return code Meaning This message appears in the JOR and the SYSOUT of the Recovery Step An internal error has occurred Action Call the Service Center RY61 IMPOSSIBLE TO RUN RECOVERY INCORRECT SYSTEM STRUCTURES 01 INCORRECT COMMAND FORMAT 02 UNKNOWN COMMAND 03 UNKNOWN JAS NAME 04 INCORRECT RECOVERY OPTION 05 SYS JAS IS JOURNALIZING OR DOES NOT EXIST 06 Meaning This message is printed in the JOR of the recovery step An error during the phase analyzing the call options to the load module H_RECOV has been detected before invoking e either the Recovery Step itself for file recovery e or the JRU for recovering the journal s The message text is self explanatory Action Call the
115. files with the same efn and obviously different volume names thus the system is unable to decide which one is referred to in the ASSIGN statement Result The step cannot be started Action Specify the media of the target file to remove the ambiguity efn CANNOT BE A VALID FILE WRONG HOMONYM Meaning In the step two ASSIGN statements specified the same efn but either the sets of media are not disjointed or the sets of media are the same but the order in which media are specified is not the same Result This error is usually detected at step initiation time the step cannot be started Action Check the JCL efn ASSIGN CONFLICTS WITH PREVIOUS ONE FOR THE SAME FILE Meaning Two ASSIGN statements specified the same efn and undefined volume list MEDIA The system cannot decide if it is the same physical file or if it is two homonym files Result This error is usually detected at step initiation time the step cannot be started 47 A2 10UJ DS34 DS35 47 A2 10UJ DS Messages ATTACH NOT PERFORMED ELIMINATE CATALOGED FILES FROM SEARCH PATH USE MWLIB AND OR MWINLIB COMMAND S AND THEN ISSUE ATTACH Meaning A terminal user working interactively in GCL can assign his work libraries by using the GCL commands MWINLIB and MWLIB Refer to the JOF Terminal User s Reference Manual The libraries you assign remain in force until you issue a further MWLIB and or MWINLIB command or you terminate t
116. for input file assignment are not satisfied Action Correct the JCL UNABLE TO GET INPUT FILE SIZE Meaning Check the input file assignment in your JCL Action If it is correct contact your Service Center or submit a STAR END OF INCLUDE ZZZZZ IS BEYOND INPUT RECORD SIZE OMIT KEY SUM ARRANGE ZZZZZ rank of the field which is beyond the record size Meaning The involved field ends beyond the end of the input record Action Correct the DSL or the user program 47 A2 10UJ TD27 01 TD27 02 TD27 03 TD27 04 TD27 05 TD30 21 TD33 01 TD33 02 TD33 03 47 A2 10UJ TD Messages UNABLE TO RETRIEVE OUTPUT FILE DEFINITION Meaning The sort cannot discover the characteristics of the output file A return code from H_RFLDEF or a return code set by Sort is given JCL error or non standard file DUMMY OUTPUT FILE Meaning This function is not available UNABLE TO OPEN OUTPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO CLOSE OUTPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO ALLOCATE OUTPUT FILE Action Check the other messages which accompany this one These will be of the form DUxx yy PREALLOC See the description of PREALLOC in the Data Management Utilities User Guide Generally the
117. gt where lt mnemonic gt is a mnemonic indicating the module DFASG File Assignment DFDES File Description Processing DFPRE File Processing Preparation DUAL File Management in the Transactional Context Restart Facility lt number gt is a one or two digit number indicating the internal function of the module which set the return code This is not important for the user lt return code gt is one of the return codes explained in this manual The return codes are listed in alphabetical order of mnemonic and numerical order of function number 47 A2 10UJ 57 1 Messages and Return Codes Directory 57 1 File Assignment TBL NI DFASG 2 ALMOST The ifn parameter supplied to the primitive H_RTVLID corresponds to several efns because file concatenation has taken place DFASG 2 DUMMY The ifn parameter supplied to the primitive H_RTVLID was previously assigned with the value DUMMY Only the general resident bit is returned DFASG 2 IFNERR An incorrect file descriptor has been supplied to H_ RTVLID DFASG 2 IFNNASG The ifn supplied to H_ RTVLID was not previously assigned DFASG 2 INDERR H_RTVLID has been used on a file concatenation The rank of the requested efn was specified but the value given was greater than the maximum number of efns assigned for the concatenation DFASG 2 UFASPATH H_RTVLID has been used with an ifn which has already been used to assign a catalog file link Th
118. incorrect access path to collector task related trace dump control buffer 47 A2 10UJ 44 1 4 47 A2 10UJ 4006 73 78 4006 79 84 4006 85 90 4006 91 96 4006 97 102 4006 103 4006 104 109 4006 110 115 4006 116 121 4006 122 127 4006 128 133 4006 134 139 4006 140 145 4006 140 145 ARGERR ARGERR INDERR COUNTERR MSGERR REQUNKN ILLSEM DUPNAME SRCHFAIL ILLSEM ILLSEM h_sndcmd RC ufas RC h_put putx RC SICID 4007 Messages TBL NE Error number Return code 4007 01 CHECK 4007 02 CHECK 4007 03 CHECK 4005 04 h_ssmfre RC TR Messages During collector task initialization phase incorrect access path to collector task related trace dump buffer The access path to trace event mode init buffer is not valid Page index in read trace event message is not on page boundary Page index in read trace event page message is not in buffer A collector task not in charge of a trace dump buffer is notified to read a trace dump page Collector task is notified with an unknown RI message Access error to collector supervisor task semaphore The collector task detected twice the same page index in trace dump buffer No trace dump page in buffer matches the latest read trace dump request Collector task related trace dump buffer semaphore incorrect state Collector task trace dump attribute is reset Incorrect submission of the operator command for the file related to th
119. insertion one record is lost Page overflow PDI overflow Process local detachment stack overflow Backing store overflow Backing store identifier overflow Virtual memory area overflow Overflow in summation field Requested space rejected by Quota Control on the selected volumes volume is not in the project s quota list Temporary quota exceeded for the project s session Permanent quota exceeded for project Requested space greater than the amount allowed by Quota Control on the selected volume s Temporary quota exceeded for the project Access violation Hierarchy access violation Timer access violation Entity should not be closed Level of access to a file not allowed Password violation 47 A2 10UJ 47 A2 10UJ 1406 1407 1440 1441 1442 1443 1444 1445 1446 1460 146F 1461 1462 1463 1464 1465 1466 1480 14FF 1481 1482 1483 1500 15FF 1501 1502 1503 1504 1505 1600 161F 1616 1617 1618 1619 1620 1621 1622 1623 1624 1630 163F 1631 1632 1700 1740 1701 1702 1703 1704 MTCHVIOL ACTIVECU SCTYVIOL SNDVIOL RCVVIOL INITVIOL MODVIOL DLVIOL LQVIOL SHRVIOL DVVIOL SHLVVIOL PMDVIOL OUTVIOL SHCTVIOL LOKVIOL ADDRVIOL CALLVIOL RDVIOL WRVIOL FILEVIOL ARVIOL OVRVIOL SCATVIOL IFNVIOL IFNSTRU RNGVIOL EVRVIOL NOTVIOL RPARVIOL CKRVIOL ABTVIOL UNBVIOL FMVIOL RESVIOL SADMVIOL DMCSVIOL FECBVIOL NOTOPENV FORBID JENTFBID INDVFBID DVIDFBID EXTFBID Re
120. is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO LOCK B_SEGMENT SIZE Meaning A return code from H_SGLOCK is given Action Either SIZE is smaller than the lock memory needed or the problem must be reported to the Service Center UNABLE TO CHANGE SEGMENT SIZE Meaning A work segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning A work segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF 42 23 Messages and Return Codes Directory TD10 16 TD10 17 TD12 01 TD12 02 TD12 03 TD12 04 TD12 05 TD12 06 TD12 07 TD12 08 42 24 UNABLE TO CHANGE SEGMENT SIZE Meaning A pseudo buffer segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF INTERNAL SORT ERROR Action Report the problem to Technical Support UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caus
121. is non TDS controlled has been assigned with SHARE MONITOR Result The operation you requested will not be performed Action Either alter the value of SHARE or make the file a controlled file BEFORE JOURNAL MISSING Meaning When GAC EXTENDED is used to control file sharing the Before Journal must be specified for each of the files to be shared Result A file for which Before journalization has not been specified cannot be shared using GAC EXTENDED 47 A2 10UJ 18 3 Messages and Return Codes Directory Action Specify that the file is to be shared without GAC EXTENDED or specify Before journalization for the file 18 4 47 A2 10UJ 19 GCOS 7 Kernel Messages General Environment GCOS 7 Kernel Messages are sent by the GCOS 7 kernel If this type of message appears you should contact the Service Center Message Description The general format of GCOS 7 kernel messages is GCOS ERROR CODE xxxxxxxx DATA xxxx INFO xxxxxxXxx RC xXXXXxXxXxXxX JP xXxXxXx Here is an example of a GCOS 7 kernel message GCOS ERROR CODE 250C0009 DATA 0301 INFO 87020028 RC 250C1E00 JP 0003 AVAIL 12 IOERR 47 A2 10UJ 19 1 Messages and Return Codes Directory 19 2 47 A2 10UJ 20 GPL Messages General Environment GPL messages are produced by the GPL Compiler Message GPLO0 just gives information Messages GPL17 to GPL48 indicate that an incident occurred d
122. is not a UFAS type file Check the source of the TDS generation UFAS and UFAS Conflict between the primitive and the file EXTENDED Any organization FILEORG FILEFORM Organization FILEFORM must be UFAS and FILEORG must be SEQ REL IDX or IDS according to the primitive called WRONGPAR 183F Wrong parameter 54 34 47 A2 10UJ WRONGPMD 47 A2 10UJ TDS VCAM ISO 1c05 Any File Organization BFAS Sequential PASCAL RTP RESNAV to YETALLOC Return Codes Master Command The CNOS administrative transaction aborts because the status parameter given in the call OPEN POOL CLOSE POOL MD NEWCONNECT DISP_RESLIMIT DIS POOL LIST POOL DISP_COR LIST_COR cannot be reached by TDS Check the status parameter of the call in the transaction code The CNOS administrative transaction aborts because the call performed OPEN POOL CLOSE POOL MD NEWCONNECT DISP_RESLIMIT DIS_POOL LIST POOL DISP_COR LIST_COR has the wrong number of parameters Check the call in the transaction code Error in the interface with ISO sessions due to 1 incorrect parameter value 2 incorrect parameter length 3 inconsistency in the ISO protocol 4 attempt to access an unreadable area Use the User VCAM Trace to better analyze the problem Check the application interface with ISO Session Service parameters Wrong processing mode COBOL Status Key value 99 Any Operation OPEN OPEN OPEN
123. is waiting for permanent file space on volsetnm Action Wait for file space to become available or issue a break command BRK to display the LHO8 message see below Type I R Destination Generic Specific LH08 WAIT FOR PERMANENT SPACE CANCEL OR WAIT DEFAULT Meaning The operator has issued a break command BRK after receiving an LH07 or LHO9 message This message is sent during IOF sessions only Action Reply WAIT W wait w or nothing to carry on waiting for temporary space Reply CANCEL CAN C cancel can or c to cancel the job Type R Destination Specific user LHO9 ron WAITS FOR PERMANENT FILE SPACE Meaning The job is waiting for permanent file space on a list of volumes which contains at least one resident volume 27 2 47 A2 10UJ LH Messages Action Wait for file space to become available or issue a break command BRK to display the LH08 message see above Type I R Destination Generic Specific 47 A2 10UJ 27 3 Messages and Return Codes Directory 27 4 47 A2 10UJ 28 MAC Messages General Environment MAC messages are produced by MACPROC when it is activated for the processing of GPL primitives Pertinent Manuals GPL User S Giideon veh tite Lhe ee Aho ta ence ted 47 A2 36UL MACPROC Reference Manudl ccccccccccccccsceteeteeett eet e tte c eee ee ca tesneesnees 47 A2 70UL MACPROC User s Gudes ee
124. message in the JOR or in the report usually says why the processing has been suspended GPL46 PROCESSING OF proc name COMPILER ABORTS IN phase name Meaning This message is displayed when the compiler is aborted due to an internal error the message indicates e the name of the program which was being processed proc name e in which phase of compilation the compiler aborted phase name Action Report the problem to the Service Center GPLA47 VMM TABLE OVERFLOW Meaning A internal compiler problem occurred in the management of virtual memory working files Result Compiling stops Action Report the problem to the Service Center 47 A2 10UJ 20 13 Messages and Return Codes Directory GPL48 UPDATE ERRONEOUS LENGTH Meaning A internal compiler problem occurred in the management of virtual memory working files Result Compiling stops Action Report the problem to the Service Center 20 14 47 A2 10UJ 21 IL Messages General Environment IL messages are produced during an Initial System Load session Message Description IL21 ERROR DURING LAST SESSION ON efn volname Meaning During the last GCOS session an I O error occurred on the system file indicated in the message SYS BKSTi SYS LIBi SYS PVMFi or SYS TVMFi In automatic mode this message is followed by IL72 AUTO MODE STOPPED Action At the following ILO1 you have to modify the list of system files in or
125. more empty SM libraries The system aborts all steps that are journalizing File integrity is guaranteed the After Journal is not damaged and user file recoveries are guaranteed You must make new primary journal files available so that the aborted steps can be restarted Refer to section three of the File Recovery User s Guide for more details Re connection of interactive session not possible because the new terminal is not of the same type as the previous one The analyzer has aborted Refer to the output listing UFAS EXTENDED Internal errors in H_XUF_JRINIT or H XUF UVALCI Send a trace and log to the Service Center 51 3 Messages and Return Codes Directory ABTASK 04C3 Generally Particularly Micro Mainframe Journalization ABTPRC 0940 MCS Abort task COBOL Status Key value 30 Any Operation Step abort produced by program call not by COBOL SORT abnormal condition Any Operation An internal error has occurred in the Link Pass Through Events Handler The user is disconnected Contact the Service Center Internal error while sending a TPR Send the PRLOG log to the Service Center Abort the current running process An invalid internal condition such as invalid data or data out of range has been detected during processing a disk for an I O request File processing discontinues Take a dump and contact the Service Center Network Generation System error Contact the Service Center
126. name index name Meaning IDS detected an inconsistency between the different elements which participate in the data base environment i e the schema and the data base files This message may be output when the schema has been reprocessed after the pre allocation of a data base file Further explanations about global consistency checks can be found in the JDS II User s Guide Result The step execution is aborted Action Check that the schema has been retrieved in the expected library check that the ASSIGN statements specify the correct files In the case where the program has been redefined without reallocating the data base files check that the data has been forced to the file allocated 9 18 47 A2 10UJ 47 A2 10UJ DDM Messages DDM00436 lt error localization gt MISMATCH BETWEEN FILE PHYSICAL CHARACTERISTICS IN SCHEMA schema name OF LIBRARY ASSIGNED TO IFN ifn AND IN LABEL OF FILE area name index name ASSIGNED TO IEN ifn Meaning The physical characteristics found in the schema resulting from the DMCL description are different from the characteristics found in the data base file which are those present in the schema at the time the files have been pre allocated This usually happens when the DMCL has been redefined after the files have been pre allocated Result The step execution is aborted Action Check that the target schema and the areas or indexes specified are the ones expected R
127. name specified in CATMODIF must contain the absolute generation number The relative generation number cannot be used Result The utility is not performed Action Modify the external file name DCT15 PERFORM SHIFT FUNCTION BEFORE UPDATING NBGEN Meaning A modification to the number of generations of a generation group has been requested although the 1 generation still has a media list attached to it Result The utility is not performed Action Perform a shift function to make the newest generation become the current one the generation group will therefore become valid for the requested function DCT16 NEWEST GENERATION NOT FOUND Meaning A SHIFT of generation has been requested but the file label of the newest generation has not been found on the media of the oldest generation In most cases this message indicates that the newest generation i e the generation following the current generation has never been created i e the file has never been opened in OUTPUT mode since the last SHIFT operation has been performed on the generation group Result The SHIFT is not performed Action Open the required file in OUTPUT mode DCT17 NBGEN ILLEGAL VALUE FOR CLOSELOOP GENERATION GROUP Meaning A modification to the number of generations of a generation group has been requested although the group is a close loop and the specified number is greater than 32 8 4 47 A2 10UJ DCT18 DCT20 DCT21
128. not found in the USEDSM list Relink with a correct USEDSM list Before a VCAM service is requested a pending status must be checked A control interval is not available An invalid Control Interval image exists in a pool buffer This is usually an information message Check ring violation The system option specified and the caller s ring number are not 0 or 1 Contact the Service Center Busy buffer and SGATTR mandatory This is usually an information message Class unknown Entity should not be closed The access method has not written the tape mark at the end of the file Central memory overloaded When a job exceeds its authorized fixed size Resource Manager 4 lt DWS gt or 1 megabyte ARM asks for its abort with the return code CMOVLD The declared Working Set for the step is too small increase the value of SIZE 47 A2 10UJ CMWSOV 1217 Any File Organization Unit Record Driver Included Job Management System Nucleus TDS UFAS EXTENDED CNSLUNKN 1003 OMH COMDERR 1895 MCS 47 A2 10UJ VMM ABNCCAD to DATALOSS Return Codes Too many pages are fixed relative to the memory size or the size of the working set is too small for some job steps Use the JCL statement SIZE to increase the size of the working set Central memory working set overflow COBOL Status Key value 30 OPEN SORT Load Module Loader Resource Management VMM Any TPR Operation M
129. of Process System Nucleus VMM NOUPDATE 1C1A BFAS Sequential REWRITE Disk Files Common Code Generator Queued Files REWRITE NOWAIT 0700 Any Disk File Any Operation Organization BFAS UFAS Tape GAC and GAC IQS EXTENDED OMH Command Processing 53 20 File currently being accessed by another process Try to synchronize processes Any Except OPEN File currently being accessed by another process File currently being accessed by another process Command locked until the system is READY 47 A2 10UJ Physical I O Access Various Internal Operations RWI NRECURS 170A NSTDLAB 1827 IONOP to RESIDENT Return Codes The previously requested I O is not yet terminated when a new request was issued Wait for the previous termination of the Channel Program Wait operation needed but not done The state of the RWI session does not permit the requested function to be performed More generally this return code is issued when a synchronisation error is detected request for analysis of E S end when no E S is in progress Recursion not allowed Not standard label Any File File Management Non standard label found Examine labels Organization Including Diskette NSWAPERR 180B System Nucleus VMM NULLPTR 184F GTWriter GAC Journalization System Nucleus Dynamic Addresser 47 A2 10UJ Segment is not swappable Operation cannot be performed as the object segment is resident either
130. of paragraph section etc 47 A2 10UJ TNnn 47 A2 10UJ 43 TN Messages General Environment TN messages are produced by the JCL translator component of the system they usually appear in the job introduction and translation report Pertinent Manuals JCE Users Guide ise cert ote Nie hah elt bahar Stee nt Btn tite in Ui etal 47 A2 IIUJ Message Descriptions ron procedure names error description RC edited return code Meaning This message usually indicates a system error an error condition has been returned to the procedure specified when calling a system primitive The return code gives the reason for the error Action Contact the Service Center 43 1 Messages and Return Codes Directory 43 2 47 A2 10UJ 44 1 TR20 44 1 1 44 TR Messages General Environment TR messages are produced when the System Trace facility is used Message Descriptions Collector Operator Messages Tr20 The general format of error messages generated by the collector is TRCCL ERROR sicid msgnbr RC TRCCL stands for Trace Collector SICID for system integration component identification msgnbr for message number and RC for return code The complete list of these messages in ascending order of the sicid message number is given below SICID 4004 messages TBL NE Error number Return code Meaning Action 4004 1 file open RC Collector initialization fi
131. on the volume overrides that declared in the command Action Check the command DV23 THE VOLUME volname OF DEVCLASS devclass DOES NOT EXIST IN THE CONFIGURATION Meaning The command refers to an irremovable volume that is unknown There is probably an error in the volume name However this message may also appear if the volume is requested at the precise moment that it is under Automatic Volume Recognition AVR in this case try again Result This error usually occurs at step initiation time and the step cannot be started Action Check the command 47 A2 10UJ 14 5 Messages and Return Codes Directory Dv24 Dv25 DV26 DV27 DV28 14 6 USE OF volnm E TAPE NOT ALLOWED ON dvc DEVICE Meaning The requested volume is an E tape and the requested device does not support E tapes cartridge library only Result The request is automatically cancelled and the cartridge is unloaded Action Check the command and the cartridges USE OF volnm 36 TRACK CARTRIDGE NOT ALLOWED ON dvc DEVICE Meaning The requested volume is a 36 track standard length tape and the requested device does not support the 36 track recording format cartridge library only Result The request is automatically cancelled and the cartridge is unloaded Action Check the command and the cartridges If you want to prepare the tape with the 18 track recording format use PREPARE TAPESET MEDIA volname HAS BEEN DECLAR
132. option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 28 UNEXPECTED LITERAL Action The option string or DSL Data Services Language must be corrected Each error is underlined by a 47 A2 10UJ 42 9 Messages and Return Codes Directory TDO2 29 TDO2 30 TDO2 31 TDO2 32 TDO2 33 TDO2 35 TDO2 36 TD02 37 TD02 38 TD02 39 42 10 UNEXPECTED NUMERIC VALUE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a UNEXPECTED ALPHANUMERIC VALUE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a WKTAPE CANNOT BE SUPPORTED BY DSORT Action The option string or DSL Data Services Language must be corrected Each error is underlined by a OUTPUT DATA MUST BE DEFAULT FOR H200 FILES Action Self explanatory INVALID COLLATE SPECIFICATION Action The option string or DSL Data Services Language must be corrected Each error is underlined by a FUNCTION PARAGRAPH MUST APPEAR 1ST AND ONCE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a ARRANGE SUM IMPOSSIBLE WITH OUTPUT KEYADDR ADDROUT Action The option string or DSL Data Services Language must be corrected Each error is underlined by a SUM AND DELETE CANNOT BE USED TOGETHER Action The option
133. parameter The return code indicates the reason The most frequent cases are e Return Code EFNUNKN the specified file has not been found e Return Code UNRECIO the disk pack or drive supporting the file may be damaged Result Processing stops No unit is processed Action Correct the JCL if relevant or contact the Service Center 47 A2 10UJ MAC Messages MAC39 OPEN OUTLIB RC edited_return_code Meaning MACPROC was unable to open the output library specified by the OUTLIB parameter The return code indicates the reason The most frequent cases are e Return Code EFNUNKN the specified library has not been found e Return Code UNRECIO the disk pack or drive supporting the library may be damaged Result Processing stops No unit is processed Action Correct the JCL if relevant or contact the Service Center MAC40 CLOSE OUTFILE RC edited_return_code Meaning MACPROC was unable to close the output file specified by the OUTFILE parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result This incident can only occur at the end of processing All output units have already been produced and may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC41 CLOSE OUTLIB RC edited_return_code Meaning MACPROC was unable to close the out
134. part of the system consult the appropriate user s manual In general entries marked internal or system are not directly accessible by the user The second column Operation contains entries for the operation e g COBOL verbs Transaction Processing Routine commands performed within the corresponding system component of the first column The third column gives an explanation of the return code and recommended action Some return codes for example DONE ALREADY do not mean an abnormal condition and consequently do not require any corrective action Using The Return Code Explanations You should do the following when you want to understand the meaning of a return code 1 Look up the return code s name in the sections following this one You will find a short generic explanation of the return code 2 Ifthe information in the short generic explanation is inappropriate or insufficient immediately following the generic explanation look up the 47 A2 10UJ 47 A2 10UJ Interpreting Return Codes relevant system component and an operation that correspond to the current circumstances Take recommended action if any If no recommended action is given or no relevant entry appears at all and the reason for the return code message is still unclear particularly for components marked internal or system you should consult the Service Center 50 11 Messages and Return Codes Directory
135. previously saved messages that appeared on the main operator s console Pertinent Manuals IGE User s Guide isisc suicide ached ore ieee Akush 47 A2 12UJ GCOS 7 System Operator s Guide ccccccccccccccccccsceeseeesteeseeetteceecnsesnseesaes 47 A2 53US Message Descriptions UNABLE TO WRITE ON SYSOUT RC edited return code Meaning The utility has failed to access the output file always the standard SYSOUT Such a message is very unusual and could indicate a system error If the return code is IOFAIL this indicates an I O error and the volume supporting the standard SYSOUT file may be damaged Result This error may occur either at OPEN time or during a WRITE operation The step execution is aborted Action Contact the Service Center INCORRECT OPTION STRING Meaning The option string OPTIONS parameter of the STEP JCL statement specifying the options for execution of the utility is incorrect e g a semi colon was encountered before the end of the string Result The utility is not performed Action Check the contents of the OPTIONS parameter of the STEP JCL statement Messages and Return Codes Directory CLO3 CLO4 CLOS CLO6 CLO7 SYNTAX ERROR Meaning A syntax error was detected in the description given in the OPTIONS parameter of the STEP JCL statement Result The utility is not performed Action Check the contents of the OPTIONS parameter of the STEP JCL stateme
136. problem is due either to a shortage of disk space or to a bad file definition ATTEMPT TO REQUEST A SORTED RECORD AFTER END OF SORT_OUTPUT Meaning The program or processor calling Sort is erroneously starting an infinite loop after the H_RETSRT primitive has returned the return code DATALIM or after the COBOL verb RETURN has activated the paragraph or Chapter AT END UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO GET SEMAPHORES Action Linkage problem insufficient semaphore pool Could be caused by nested sorts UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support 42 31 Messages and Return Codes Directory TD33 04 TD33 05 TD33 06 TD33 07 TD33 08 TD33 09 TD33 10 TD33 11 TD34 01 TD34 02 TD34 03 42 32 UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO GET RECORD BLO
137. real ARG gt 2 50 PI complex tanh CDTNPREC 1A74 imag ARG gt 2 50 PI complex tan CDUNKN 100B Unknown command GTWriter An unknown command has been specified No action is performed OMH Command An unknown command has been specified Processing SBR Collector and An unknown command has been specified Analyzer Syntax error Correct the input command s CHAINLIM 0022 The limit of a chain of elements has been reached Buffer Management Resource Status After the BUFNAV return code has been issued the Get Buffer Request is not enqueued The buffer pool may be enlarged Refer to the dump Network Generation The last object has been reached when retrieving in the dictionary using TYPE This is not an error The selected object type has been found in the telecommunications dictionary 47 A2 10UJ 51 23 Messages and Return Codes Directory CHECK CINAV CKRVIOL CLASSUKN CLOSVIOL CMOVLD 51 24 0ocs Buffer Management Resource Status GTWriter Dynamic Addresser System Nucleus VCAM Any operation 0A1C UFAS EXTENDED 1619 System Nucleus VMM UFAS EXTENDED 100D 1403 File Storage and Tape Handling File Management 0501 System Nucleus Automatic A check is mandatory here The server has been aborted due to an error For further information refer to the dump There is an inconsistency in the GT Writer tables The load module is aborted The sharable module was
138. record for example Result If the source unit is incorrect processing usually stops for that unit but any subsequent units are processed In the case of an incorrect include member the processing of the current source unit usually continues but the include is ignored Messages in the JOR indicate which units have been processed Action Correct the JCL or check the erroneous source or include units The message texts for the error number nn are as follows MESSAGE TEXT ILLEGAL VERSION NUMBER IMPOSSIBLE TO CLOSE THIS FILE ERROR WHILE READING THIS FILE ERROR WHILE READING THIS FILE THE SPECIFIED SUBFILE DOES NOT EXIST IN ASSIGNED LIBRARIES THE SPECIFIED LIBRARY OR FILE IS NOT ASSIGNED THE SPECIFIED SUBFILE DOES NOT EXIST IN THE LIBRARY unused RECORD TOO SMALL TO BE A SSF_RECORD IGNORED UNEXPECTED SSF CONTROL RECORD IGNORED TOO LONG A RECORD TO BE AN INPUT LINE IGNORED NEXT OR FIRST MEMBER OF A SERIES MISSING EMPTY SOURCE FILE ILLEGAL SYNTAX IN MEMBER SERIES OF THE OPTION STRING IMPOSSIBLE TO NOTE WHERE TO START FROM AT NEXT MEMBER IN THE SERIES ILLEGAL OPTION STRING SPECIFIED FILE NOT ASSIGNED INPUT FILE THE FILE OR LIBRARY CANNOT BE OPENED THE SUBFILE CANNOT BE OPENED IMPOSSIBLE TO REPOSITION ON THE BEGINNING OF THE NEXT MEMBER IN THE SERIES THE FILE IS NOT A SOURCE LIBRARY THIS INCLUDE FILE CANNOT BE CLOSED MORE THAN ONE LIBRARY MAY MATCH THE LIBRARY NAME OF AN INCLUDE MEMBER unused
139. recording information in the Log C2 file Action Consult the Service Center JPPC SERVICE UNAVAILABLE OR OVERLOADED IQS RUNS IN DEGRADED MODE Meaning This is a warning message IQS only version 41 cannot use the JPPC service it uses the GMEM file Action Verify that the JPPC is not accessible TPR NOT INCLUDED Action None internal error UNABLE TO CREATE A CACHE FOR CONTEXT Action None internal error UNABLE TO EXPAND THE CACHE OF CONTEXTS Action None internal error CANNOT CLOSE ALL XCP2 POOLS RETRY LATER OR SUBMIT TTDS STRONG Meaning This is a warning message A protocol problem prevents the normal ending of a TDS application using XCP2 after a TERMINATE_TDS command Action Try the TTDS command later or issue with the STRONG option INCONSISTENCY IN XCP2 SERVICE AT WARM RESTART COLD RESTART MANDATORY Meaning This is a warning message A protocol or configuration problem prevents the normal start of the XCP2 service 29 25 Messages and Return Codes Directory MV18 MV19 MV20 MV21 MV22 MV23 29 26 Action Restart TDS in cold mode MLDS FILE NO LONGER SUPPORTED IFN XXXXXXXX Meaning MLDS files are not supported in this release of GCOS 7 Action None possible H_SWAP ERROR DETECTED BY TDS EXPECTED ADR CCCC TT RR READ CCCC TT RR Meaning H_SWAPxx is the ifn of the swap file No error has been detected by the I O interface but the address rea
140. requested file space for the catalog or catalog extension is not available on the specified media Check volume contents Insufficient room for temporary work file Create larger file A address CYLINDER TRACK given for an allocation or extension is not available Find this address using VOLLIST Free or change the address The specific address is out of the disk space split Allocation No more space available to restore or duplicate a file Find a volume with enough space to extend the restored or duplicated output file and request dynamic extension OUTALC or EXTEND parameter The extension of a batch commit extension of the journal is not possible Send the PRLOG log to the Service Center Unavailability of mass storage space Some message data not transferred Space overflow No more space available for control structures Contact the Service Center During exchanges with VCAM an error is detected in the buffer size Adjust the buffer size if possible No more space available in the system table OCQ or in the space for parameters The number of messages exceeds the permitted quota for the process group Not enough memory to initialize the process group Check JCL SIZE parameter 47 A2 10UJ PCF System Nucleus System Output SPCNTNAV 0A40 SPLIT 00E9 UFAS and UFAS EXTENDED Indexed SPNACNT 00C4 SPWRNG 1A13 SPWROV 1A63 SPWRUN 1A60 SPWRZRNG 1A12 SQOV 1232 SRCHFAIL 0488
141. required for this file which is not in an inconsistent state Action Do not use this command in this case DDM00440 lt error localization gt PROTECTION IMPLIES REPEAT OPTION FOR THIS STEP Meaning The file protection for this step requires a REPEAT option MONITOR gt REPEAT for example Result In Batch environment the step execution is aborted Action Check the JCL statements for this step because the REPEAT option must be specified DDM00441 lt error localization gt PLEASE CHECK IF BEFORE JOURNAL IS NEEDED FOR THIS STEP OR LOCKMARK HAS BEEN DECLARED BY ERROR FOR IDS FILES Meaning Check if this step needs a BEFORE JOURNAL or if LOCKMARK has been specified by error for IDS files because LOCKMARK is allowed only for IQS Result In Batch environment the step execution is aborted Action Check the JCL for this step and contact the Service Center if necessary DDM00442 lt error localization gt DATA BASE FILE IS NOT IDS Meaning The assigned file is not an IDS II file since the file labels do not have an IDS II structure Result In Batch environment the step execution is aborted Action Contact the Service Center or check the ASSIGN statement or use the PRINT LABEL command of H_ DBUTILITY 9 20 47 A2 10UJ DDM Messages DDM00443 lt error localization gt DEFERRED WRITE IS NOT SUPPORTED FOR TDS FILES SHARED AT SYSTEM LEVEL Meaning The deferred updates are not supported for f
142. return address in the stack was modified Modify the user code 1 Invalid page number Verify it 2 A process has been suspended after an external exception has occurred Any I O Operation Record key value outside file limits Correct GET Dynamic Addresser Various Operations OPEN program Diskette address out of file limits Address violation An attempt has been made to CANCEL an active Commitment Unit Address format error Incorrect volume address format System error Given address format insufficient to receive diskette address format e g TTR or LRRR required with blocked records 47 A2 10UJ AGENERR 1874 AGENUNKN 101D Catalog Management H_UNCAT ALIASERR 181F Queued Files OPENS ALMOST 0015 ABNCCAD to DATALOSS Return Codes Absolute generation error Absolute generation unknown on volume When uncataloging an object an absolute generation number has been referenced which is not known to the catalog Check and modify this number Not possible for an alias Subfile processed through ALIAS but the PMD is not input Request not fully performed COBOL Status Key Value 00 DSD File and Data File Space Management Management Utilities FORMS System Disk Job Management Introduction of Jobs MCS RECEIVE Network Generation RBF Level 6 AM Services Tabulation Handling System Nucleus Automatic Internal Resource Manager Request partially performed
143. site is invalid Action None Ifthe problem persists contact the Service Center UNABLE TO SEND MESSAGE RC return code Meaning The turn for transmission has not been acknowledged by receiver Action None Ifthe problem persists contact the Service Center REMOTE INTERACTIVE SESSION STARTED Meaning A pass through is started Action None CONNECT REJECTED BY REMOTE APPL VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning User unable to connect to the mailbox of the application Action Refer to the VCAM error codes CONNECTION IMPOSSIBLE VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Connection parameters are not valid for the user s cataloged rights Action Refer to the VCAM error codes CONNECTION REJECTED STATUS ABNREJCT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Abnormal rejection Action None CONNECTION REJECTED STATUS DNODENOP VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Destination node not operable Action None CONNECTION REJECTED STATUS DNODESAT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Number of connections supported by the destination node is saturated Action Refer to the VCAM error codes 33 7 Messages and Return Codes Directory PT49 PT50 PT51 PT52 PT53 PT54 PT55 33 8 CONNECTION REJECTED MAILBOX UNKNOW
144. start of the step neither jasname2 JAS nor the SYS JAS is available and the step aborts Action 01 Create the JAS requested Meaning Message 02 At the start of the step jasname2 JASDIR has not been allocated or cataloged in the catalog jasname2 CATALOG and the step aborts Action 02 Allocate jasname2 and catalog it in jasname2 CATALOG Meaning Message 03 Applies to the SYS JAS Action 03 Run JRU Meaning Message 04 System error Action 04 Run the PRLOG utility to print the ERLOG file If the message persists contact your service center Destination of the message all variants JOR of the step 47 A2 10UJ JPA7 JP47 JP51 47 A2 10UJ JP Messages jasname1 journalization cannot be performed THE AFTER JOURNAL IS DAMAGED THE STEP JRU HAS BEEN LAUNCHED CHECK IT IS SUCCESSFUL 01 jasnamel1l journalization cannot be performed IMPOSSIBLE TO ACCESS jasname JADIR DIRECTORY FILE 02 Meaning A step has begun a journalization session on a non private JAS 01 when the After Journal is damaged 02 when it is impossible to access the JAS directory Action 01 The JRU step has been launched but a TDS session or the opening of file for a batch IOF session is rejected with JAP 5 DAMAGED Try again once JRU is completed If JRU is not successful launch the REBUILD command of MNJAS to recover the JAS integrity 02 Make the JAS directory accessible and repeat the ac
145. string or DSL Data Services Language must be corrected Each error is underlined by a INCLUDE AND OMIT CANNOT BE USED TOGETHER Action The option string or DSL Data Services Language must be corrected Each error is underlined by a MULTIPLE RECORD PARAGRAPH Action The option string or DSL Data Services Language must be corrected Each error is underlined by a 47 A2 10UJ TD Messages TD02 40 OVER 64 KEYS SPECIFIED Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 41 OVER 16 SUM FIELDS SPECIFIED Action Self explanatory TD02 42 OVER 128 ARRANGE FIELDS SPECIFIED Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 43 OVER 16 INCLUDE OMIT CONDITIONS SPECIFIED Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 44 INVALID FIELD SPECIFICATION Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 45 FIELD LENGTH MISSING Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 46 ILLEGAL FIELD TYPE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 47 FIELD TYPE MISSING Action The option string or DSL Data
146. structures are damaged A system error has occurred Contact the Service Center An internal error has been detected in the UFAS GAC control structures Dynamic reinitialization of GAC and UFAS usually takes place If it does not contact the Service Center The data structures PGCS and PCS were found to be inconsistent during the loading of a step If the step is preinitialized cancel this with the CLM command and preinitialize again with the PLM command If the step is not preinitialized re link the load module After Journalization is impossible due to a previous system error Refer to the File Recovery Facilities User s Guide for more information Enabling ends abnormally and the configurations running are no longer valid Run the CRNETGEN utility Cataloged Messages Cataloged message defined incorrectly Dump Analyzer The Program Checkout Facility cannot create or retrieve its working segment Send a STAR Dynamic Addresser A SMAT inconsistency occurred at step Loader XCP2 termination Modify the user code Internal system data structure inconsistent Contact the Service Center Internal TDS XCP2 error detected Contact the Service Center 1 The region identified in the MME is Management not the owner of the list in which the page is linked H_PANIC is called 2 The MME chaining is damaged H_PANIC is called 3 The PGCS segment descriptor of the process group to be released is an ISD 4 The VMF contro
147. system processor calling SORT contact the Service Center System Interface WithReading of Sorted End of file has already been encountered COBOL SORT Records RETURN TDS Any TPR Operation Unit Record Driver GET Diskette PUT 47 A2 10UJ Implies that fewer sorted records are available than were expected The step is aborted End of file DATALIM already signalled End of data EOD already signalled in a previous GET No more space available limit of 10 work volumes reached 52 17 Messages and Return Codes Directory EXTERR EXTFBID EXTLIM 52 18 1820 DMU File Management Assignment of File Volume or Device System Disk Save and Restore Journalization MCS Queued Files OPEN SORT MERGE TDS OPEN UFAS and UFAS OPEN EXTENDED 1704 002C File Management Various SORT MERGE Workfile Allocation Extent error A diskette contains more than 200 files The specified extent does not exist Internal Overlap between two file extents on a volume Inconsistency found in the extent description of a file during the saving or restoration of a volume This is probably a system error check the file Error in the calculation of the address of an extension journal Send the PRLOG log to the Service Center A request has been made to read or write a record outside the limits of the allocated file Try again if the same condition occurs call the Service Center At least
148. table at the end of this section lists the most common system component codes together with their full names number A number used internally to identify a specific part of the given system component name2 The return code mnemonic The sections following this one contain a complete list of these mnemonics The following figure illustrates the parts of a return code in a message 47 A2 10UJ 50 1 Messages and Return Codes Directory RC XXXXxxxx gt namel number name2 return code mnemonic internal number within system component system component name numeric return code system component number abbreviation of Return Code Figure Showing a Return Code in a Message NOTE A message containing a return code is often preceded by another message set by the system or a warning message or error message The other message might give for example details of the file being processed at the time 50 2 Understanding Messages With Return Codes The following examples of messages containing return codes illustrate how you interpret the information contained in the message TASK MAIN J 01 P 00 ABORTED BY SYSTEM RC 208304C5 gt EXCEP 3 PROCEXCP The above message printed in a Job Occurrence Report JOR indicates that the return code PROCEXCP was set by the system component EXCEP Exception Handling The return code mnemonic PROCEXCP means that there was an abort by process or a sy
149. text indicates e the operation being performed either a checkpoint or restart e the result of the error e the origin of the error explained in the checkpoint code and the return code Action Contact the Service Center 47 A2 10UJ 6 3 Messages and Return Codes Directory CK06 xx checkpoint code RC edited return code RESTARTING FROM CHKPT n STEP ABORTED WHILE IN CHKPT n RESTART ABORTED CHECKPOINT ABORTED Meaning System error The message text indicates e the operation being performed either a checkpoint or restart e the result of the error e the origin of the error explained in the checkpoint code and the return code Action Contact the Service Center CK0O7 11 UNABLE TO REOPEN JOURNAL RC edited return code WHILE IN CHKPT n STEP ABORTED CHECKPOINT ABORTED Meaning The Before Journal file cannot be accessed at checkpoint time This may be due to a system error Action Check the volume supporting the journal file Contact the Service Center if required CKO07 12 UNABLE TO REOPEN Q JOURNAL RC edited return code WHILE IN CHKPT n NEXT CHKPTS INHIBITED Meaning The journal for communication queues cannot be accessed This may be due to a system error Action Contact the Service Center 6 4 47 A2 10UJ CLO1 CLO2 47 A2 10UJ 7 CL Messages General Environment CL messages are produced by the PRLOGC utility that is used to output
150. the CU library The return code gives the reason for the incident Result The Compile Units had already been produced and may be accessible in the CU library 47 A2 10UJ 31 3 Messages and Return Codes Directory PAS12 PAS13 PAS14 PAS15 31 4 Action If the incident was an I O error check the disk drive and the disk pack If necessary contact the Service Center CLOSE INLIB RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to close the library containing the source programs The return code gives the reason for the incident Result The compiler processing continues Action If the incident was an I O error check the disk drive and the disk pack If necessary contact the Service Center CLOSE SYSOUT RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to close the standard SYSOUT containing the report The return code gives the reason for the incident Result This incident occurred at the end of compiler processing and the CUs were already produced The produced listings may be accessible and successfully printed Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center CLOSE PRTLIB RC edited return code Meaning An incident which may be due to a system error occ
151. the JCL if relevant and report the problem to the Service Center 47 A2 10UJ 36 3 Messages and Return Codes Directory RDN16 RDN17 RDN18 RDN19 RDN20 36 4 ERROR WHILE PROCESSING OPTION STRING MISSING AFTER SOURCE Meaning Inconsistency in compiler options delivered to RDN module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center ERROR WHILE PROCESSING OPTION STRING MANDATORY SOURCE INFILE PARAMETER MISSING Meaning Inconsistency in compiler options delivered to RON module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center WARNING jcl parameter IS IGNORED IN STEP OPTION STRING Meaning Inconsistency in compiler options delivered to RDN module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center ERROR WHILE PROCESSING OP
152. the JOR indicate which units have been processed Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center 28 12 47 A2 10UJ MAC Messages MAC47 CHNAME STORE FOR store_member_name RC edited_return_code Meaning To preserve the old version of a prototype in case an error occurs during storage the new member of the store library is created with a temporary name If the storage is successful the old member is deleted and the new member is renamed An incident has occurred during the renaming of the member The return code indicates the reason It is usually a system error but it may be due to the action of another processor such as the MAINTAIN LIBRARY command LIST which has accessed the member during the short time between closing and renaming Result Processing stops Messages in the JOR indicate which units have been processed The old store members if any exist and any new current store members are deleted Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC48 CLOSES PRTLIB RC edited_return_code Meaning An incident occurred after the creation of the listing in the report library specified by the PRTLIB parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result
153. the access method Action Modify the JCL statement ASSIGN In some cases the use of device pool facilities can minimize the device utilization Refer to the JCL User s Guide 47 A2 10UJ 41 1 Messages and Return Codes Directory SQo2 SQo3 sQo4 soos SQod6 41 2 IFN IFN IFN IFN IFN ifn INVALID SHARING LEVEL VALUE Meaning The SHRLEVEL value of the file description indicating in which type the file control structures are allocated is unknown The message normally indicates a system error Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn INVALID RECORD FORMAT Meaning The RECFORM value found in the file description is unknown Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn RECORD FORMAT NOT SUPPORTED KEY OR TRACK OVERFLOW Meaning The specified record format is not supported records with key or records with track overflow Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn RECORD FORMAT NOT SUPPORTED SPAN Meaning The specified record format is not supported spanned records Result The file cannot be opened and an abnormal return code is set by the access method
154. the compiler the return code gives the reason Such a message indicates a system error Result Compiling stops Action Contact the Service Center 20 10 47 A2 10UJ GPL33 GPL34 GPL35 GPL36 GPL37 47 A2 10UJ GPL Messages OPEN SYSOUT RC edited return code Meaning The compiler was unable to OPEN the standard SYSOUT in order to create the compiler report the return code gives the reason Such an error is unusual and may indicate a system error Result Compiling stops but the CU is already produced in the CU library Action If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary PSEGMAX OPTION IS OBSOLETE USE WITHIN CLAUSE IN SOURCE PROGRAM Meaning The PSEGMAX option can no longer be used to split code segments automatically Result The option is ignored Action Use the WITHIN clause in the source program to split segments SEGSIZE FCB POOL RC edited return code Meaning There was a problem with the management of the virtual memory files used by the compiler the return code gives the reason Such a message indicates a system error Result Compiling stops Action Contact the Service Center SOURCE member name NOT FOUND Meaning The user asked for compilation of a source program present in the member member name but the member does not exist in the specified source library Res
155. the current record is not stored in the report file Action Report the problem to the Service Center 20 9 Messages and Return Codes Directory GPL28 CHNAME CULIB FROM WORK member name 1 TO member name 2 RC edited return code Meaning The compiler has created a new version of a CU when an old version existed in the library in a member with a work file name member name 1 After deleting the old member the compiler renames the work member with its actual name member name 2 An incident the reason for which is given by the return code occurred during this operation Result Compiling stops Action If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary GPL30 VMMACC WORK RC edited return code Meaning There was a problem with the management of the virtual memory files used by the compiler the return code gives the reason Such a message indicates a system error Result Compiling stops Action Contact the Service Center GPL31 VMFOP WORK RC edited return code Meaning There was a problem with the management of the virtual memory files used by the compiler the return code gives the reason Such a message indicates a system error Result Compiling stops Action Contact the Service Center GPL32 VMFCL WORK RC edited return code Meaning There was a problem with the management of the virtual memory files used by
156. type referenced does not match with the one stored in the catalog Check the OBJTYPE RELTYPE or TYPE parameter Invalid ROOT structure for DBCS A library type which is not SL has been specified for an SWI member The binary subfile specified in the LOAD parameter of the CRNETGEN command is not the NG type Check the contents of the library and run NETGEN again 1 Only JCGs LMs may be disconnected 2 JCG or LM connection is forbidden 47 A2 10UJ OBJUNKN 1017 Catalog Management CATLIST UNCAT CATBUILD REPLACE MODIFY ATTACH CATALOG SHIFT File Management File Space Management Utilities FORMS GCL RBF Site Management Network Generation Automatic Resource Manager System Nucleus 47 A2 10UJ IONOP to RESIDENT Return Codes Object unknown on volume The object name given in the FROM or the CURRENT parameter has not been found in the specified catalog The object to be deleted is a directory or has not been found in the catalog The directory beyond which the catalog is to be built does not exist The catalogued file has not been found in the specified catalog Check catalog contents against JCL Catalog name not found in site catalog The directory or master directory under which the object name is to be catalogued has not been found in the specified catalogs The generation group has not been found in the specified catalogs The cataloged file name referenced by th
157. want more information about a particular part of the system consult the appropriate user s manual In general the user cannot directly access entries marked internal or system The second column Operation contains entries for the operation e g COBOL verbs Transaction Processing Routine commands performed within the corresponding system component of the first column The third column gives an explanation of the return code and recommended action Some return codes for example DONE ALREADY do not indicate an abnormal condition and consequently do not require any corrective action There is a list of abbreviations used in the nterpreting Return Codes Section 47 A2 10UJ 52 1 Messages and Return Codes Directory DATANAV DATNHUN DCOTLOW DCOTOV DCOTPREC DCSHOV DEADLOCK 52 2 0A17 Dump Analyzer File Management SBR System Nucleus TDS UFAS and UFAS EXTENDED Disk Files 1A7D 1A28 1A27 1A29 1A67 0D00 GAC and GAC EXTENDED SBR Data not available The Extended System Base has not been saved in the dump Testing cannot be carried out The action to be taken depends on the contents of the file Save and Restore Infile was found in an unstable state The utility cannot be executed File Space A file has been found in a physically unstable Management Utilities state possibly due to an abort while using FILREST or FILDUPLI Restore the file again An SRB pr
158. was an I O error check the disk drive and the disk pack Contact the Service Center if necessary GPL K12 ERROR WHEN CLOSING INLIB RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to CLOSE the library containing the source programs The return code gives the reason for the incident Result The compiler processing continues Action If the incident was an I O error check the disk drive and the disk pack Contact the Service Center if necessary 20 4 47 A2 10UJ GPL Messages GPL K12 ERROR WHEN CLOSING SYSOUT RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to CLOSE the standard SYSOUT containing the report The return code gives the reason for the incident Result This incident occurred at the end of compiler processing when the CUs were already produced The reports may be accessible and printed Action If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary GPL K12 ERROR WHEN CLOSING PRTLIB RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to CLOSE the report file or the library specified in the PRTLIB parameter of the JCL or a sequential file specified in the PRTFILE parameter of the JCL The return code gives the reason for th
159. with a remote site Call the POST Any Operation REWRITE DELETE START CLOSE Service Center A site cannot be accessed A timer automatically checks the site every ten minutes to determine whether it has become operational Destination node saturated Destination node unknown Destination not specified For a COBOL user ECSNAME must be CONSOLE Invalid endpoint name The contents of the SYMBOLIC DESTINATION or SYMBOLIC QUEUE is illegal Request has been fulfilled Correct execution No action required May mean a dummy file was assigned No operation performed No action required 47 A2 10UJ DONEIDC 0001 FORMS DONEIDE 0002 File Management FORMS DPREJCT 1712 DPWRNG 1A15 DPWROV 1A64 DPWRUN 1A61 DPWRZRNG 1A14 DRTERR 1810 DSAC 0380 DSBO 2800 DSBO0O 2800 DSBO1 2801 DSB02 2802 DSB03 2803 DSB04 2804 DSB05 2805 DSB06 2806 47 A2 10UJ 03FF 2807 DATANAV to IOFAIL Return Codes Done correct input data A function key has been received but the function code field was not selected Select the function key field in the selection vector to get the function code and suppress the warning Done input data error Save and Restore SAVE or RESTORE has been terminated but some tracks have not been processed correctly due to I O errors The integrity of the output file is not certain The contents of the selection vector are invalid Check the selection vector for th
160. 0 CALLVIOL DFPRE 20 CONFLICT DFPRE 20 DUMMY DFPRE 20 EFNUNKN 57 16 Set in the following cases The value of the ACCMODE parameter is invalid The value of the REFMODE parameter is invalid For a tape file the volume sequence number given in the INADDR parameter does not belong to the media list The address of the zone to which the efn is to be returned is invalid The address of the zone to which the subfile name is to be returned is invalid The address of the zone to which the file attributes are to be returned is invalid An assign has been attempted with ACCESS EXECUTE but the caller is not at least of ring 1 An error occurred when calling the access method Set in the following cases No access method has been found which corresponds to the device format and organization given for the file FIRSTVOL is specified as a parameter for the assign the processing mode is neither APPEND nor INPUT and the file is not a cataloged tape file FIRSTVOL EOF is specified as a parameter for the assign and the processing mode is not APPEND LASTVOL EOF is specified as a parameter for the assign and the processing mode is not INPUT A file with a dummy ifn has been opened successfully A work tape has been wrongly requested for a cataloged tape file 47 A2 10UJ 47 A2 10UJ DFPRE 20 FUNCNAV DFPRE 20 IFNERR DFPRE 20 IFNNASG DFPRE 20 MDERR DFPRE 20 NOWAIT DFPR
161. 05UL COBOL 85 User s Guide 47 A2 O6UL Message Descriptions CBLO1 ERROR WHILE COMPILING LINE source line number OF program id RC edited return code ON file ifn Meaning An abnormal condition caused the compiler to terminate abnormally The message gives the abnormal return code returned by the system service called by COBOL Unless the error was in the listing file ifn H_PR a diagnostic message is available in the compilation listing which specifies which kind of error was encountered Result Compilation is aborted In some cases the source program was already analyzed The CBL02 message gives a summary of errors detected Action Examine the diagnostic message in the compilation listing Contact the Service Center if necessary Messages and Return Codes Directory CBLO1 ERROR WHILE COMPILING program name LISTING FILE EXHAUSTED Meaning While creating the compilation listing in a permanent file specified in the PRTLIB or PRTFILE parameter the compiler runs out of available space in the file Result Compilation is aborted The new CU is not produced the old version of the CU is still available in the library if it in fact previously existed Action Use another permanent listing file or the standard SYSOUT file CBLO1 ERROR WHILE COMPILING program name INVALID LIB TYPE FOR PRTLIB PRTFILE SYSOUT Meaning The library where the compilation listing is to be stored indicated in the
162. 0A02 Any File Device not assigned COBOL Status Key value 30 OPEN Any Operation Organization Except BFAS Sequential Disk BFAS Sequential Disk FORMS OPEN Physical I O Access RBF RWI 180F Availability Control Various System Components 1208 Various System Components Assign Remote Device Entry Set Function Mask Set Operating Control Various Operations Various Operations An attempt has been made to open a file which had been assigned to a pooled device using the option POOL NEXT however a file on the same device assigned using the option POOL FIRST has not been closed with the COBOL option WITH LOCK Therefore the device cannot be released Device not available Device not available or device identifier not recognized Check syntax Value of MOUNT not consistent with current processing mode All volumes must be mounted Correct MOUNT parameter Device not supported The device is not currently available Use the MDHW IN command No device entry for that site Site for which remote device entry is required does not exist Device not available The device containing the part of the file on which the transfer could not be performed has become unavailable Device name error Unknown device Unknown device No more devices Too many devices specified Correct program 47 A2 10UJ DVVIOL ECBERR ECBNASG EC
163. 12 FORMS IOF Journalization PASCAL RTP Format 47 A2 10UJ Truncation occurred when moving the current record from the data block to the user specified work area The size of the work area or the maximum data transfer expected specified by the ALN parameter was exceeded Read will be successful in any case Wrong logical item length when compared with expected item length The specified record has been truncated Extend the working area The user s buffer is full before all the data descriptors have been read in Increase the size of the buffer or use a DPAN buffer Internal interface error Contact the Service Center The returned record is truncated ALN bytes as the user record area is too small Record is truncated to the length specified ALN bytes Work area overflow A system error has occurred during a work area overflow Contact the Service Center An exception occurred when moving the received data to the user area Verify the characteristics of the areas used FIN PUT GET or ASKIOF macros Error while journalizing on a new journal sector Send the PRLOG log to the Service Center A line which has been formatted is too long to be written to the text record Insert a WRITELN statement 54 31 Messages and Return Codes Directory WDMOD WDNAV WITHAR WITHDETL WITHREL WITHSYN WRITPROT 54 32 SBR Collector and Syntax error Refer to the error message Ana
164. 2 3 12 5 Module H_Dfsrd_Plug eee eeeceeeeesneeeeeeeneeeeeeenaeeeeeecaaeeeeeaaeeeeeeaeeeeeseaeeeeeenaeeeene 12 4 12 6 Module H Disrd PLU Giese ciesd eo sateetend auido a a a ae 12 8 12 7 Module H_Dfsrd_Slave ooo ceccceeececceeceeeeneeeeeeeeeeeeeseaeeeeeeeeseaeeseaaeeseaeeeseaeesseeeseeeeeaees 12 8 12 8 Module H_Dfsrd_Spgim ccccccccceceeeeeeneeeeeeeeeeeeeeeaeeeeeaeeseeeeeseaeeeseaeeseeeeneaeeeneaeene 12 14 129 Mod le A Dfsrd SM reata aae ec aen aa e a E Eae a a aaa aeae 12 15 12 10 Module H_Dfsrd Wait icc a inrrniaie eter saN EANA Aa ui eerie e NEE e pE 12 16 12 411 Mod le H Gac INIS V iiei a a a E E E e 12 18 13 DUF Messages 13 1 Ufas Message Descriptions sssseseeesessennnteesetttrrnnttneetttnrnnnteertttnnnnnnseetnnnnnnnaeennnn nnne 13 1 13 2 Ufas Extended Message DescriptionS esseseesessreeeriirstiirtstiintnttintnntinnnntnnnnetnnnneena 13 3 18 21 File LeVel StatiStieS rna aa s eet eee aa a cas A ead 13 3 13 2 2 Pool Level Statistics 0 0 eai n e a a a 13 3 13 2 3 Step Level Statistics 2 0 0 cecce cece eeenee cence eeseeeteaeeeesaeeseaeeeesaeeseaeeeesaeeeseaeenaas 13 4 14 DV Messages 15 DY Messages 16 EX Messages 16 1 Exception MeSSages annene ias AEA NaS eNA VENG Eaa KATA EE EEAS aas 16 1 16 2 Main Exception Conditions ccccceccceeceeeeeeeeeeceeeeeeeeeseaeeeseaeeseaeeeseaeeeeeeeseeeeseaeeseaees 16 2 17 FP Messages 18 GAC Messages 18 1 Gac Message Descr
165. 27 ry28 ry29 39 2 jasname impossible to find sys jrnal features Meaning This message is printed in the SYSOUT of the recovery step The physical attributes of SYS JRNAL cannot be retrieved No further operator intervention is possible and the Recovery Step terminates Action See H4 type JAS and Recovery in the File Recovery Facility User s Guide jasname wrong sys jrnal block size Meaning This message is printed in the SYSOUT of the recovery step The block size of SYS JRNAL is incorrect No further operator intervention is possible and the Recovery Step terminates Action See H4 type JAS and Recovery in the File Recovery Facility User s Guide jasname impossible to cr ate before journal CONTROL STRUCTURES Meaning This message is printed in the SYSOUT of the recovery step The control structures necessary for rolling back the files cannot be created No further operator intervention is possible and the Recovery Step terminates Action See H4 type JAS and Recovery in the File Recovery Facility User s Guide TDS tds_name user_ron cannot be recovered Meaning This message is printed in the SYSOUT of the recovery step Rollback and or rollforward cannot be executed for this TDS since it cannot supply the list of CUs commitment unit aborted or committed e either on recovery before system crash e or during the Recovery Step Since the files accessed by this TDS remain unstable this TDS cannot b
166. 53 5 Messages and Return Codes Directory LIMIT 0020 003F LINKERR 181E PASCAL RTP Various Operations SBR Collector LINKLIM 0026 LINKOV 1209 LINKUNKN 1022 LNERR 1807 Value limit has been reached during the operation Not possible for a link Internal consistency check has failed Contact the Service Center The MSC option cannot be started because of inconsistent IRT Check the IRT or contact the Service Center Link number limit has been reached during the operation No more links Link name unknown Length erroneous COBOL Status Key value 92 BFAS UFAS Tape Catalog Management CREATE CATMODIF COBOL DMU Error Logging 53 6 READ Size of current block inconsistent with Tape block size specification Investigate with file dump FILDESC FILPRINT utilities may be a system error The length of the text record to be created is greater than 128 bytes or is negative Check the ALN parameter The specified record length does not correspond with the length of the record to be modified Check the ALN parameter The data item referenced in the depending on option of an OCCURS or PICTURE clause lies outside the limits specified in that clause or a reference modification specifies characters outside the data name An error message is too long Contact the Service Center When a log file is opened the allocation parameters BLKSIZE and RECSIZE differ from the values gi
167. 7 A2 10UJ 47 A2 10UJ DFPRE 29 ALREADY DFPRE 29 FUNCNAV DFPRE 29 IFNERR DFPRE 29 OPEN DFPRE 32 CONFLICT DFPRE 33 ALREADY DFPRE 33 ARGERR DFPRE 33 FUNCNAV DFPRE 33 IFNERR DFPRE 33 IFNNASG DFPRE 33 NOLOCK DFPRE 33 SHCTVIOL DFPRE 33 TIMEOUT DFPRE 38 IFNERR File Management Return Codes in More Detail The same ifn string is already used in user pool Set in the following cases The TYPE parameter specified for the dynamic file descriptor is 0 but the caller s ring is not at least 1 The FILEFORM parameter is not BFAS or UFAS The FILEORG parameter is not QUEUED or SEQUENTIAL The FILEORG parameter is QUEUED but FILEFORM is UFAS The RECFORM parameter is invalid RECSIZE is greater than BLOCKSIZE The DATAFORM parameter is invalid The ADDRFORM parameter is invalid The caller s ring is not at least 1 and therefore modification or deletion of a type 0 dynamic file descriptor is forbidden The dynamic file descriptor that was specified to be deleted cannot be retrieved from the user pool The specified ifn is open and so the dynamic file descriptor cannot be modified or deleted Checkpoint processing has failed The specified ifn is already locked Set in the following cases The specified COBOL option is invalid There is an inconsistency between the Time Slicing and the Repeat inputs Function not available for SFINIT files An invalid ifn has been specified Th
168. 73 DCT77 DCT78 DCT87 8 12 name name Result The utility is performed and so the specified catalog is made auto attachable but the directory that already is known in the site catalog is not created as a master directory link CANNOT BE ATTACHED AUTOMATICALLY DEPENDENT NODES EXIST Meaning An attempt has been made to build an automatically attachable catalog beyond a given directory Result The utility is not performed Action Create the catalog under a free master directory DELETION OF MASTER DIRECTORY LINK IN SITE CATALOG NOT PERFORMED name name Meaning The UNCAT function has been requested on a master directory of an automatically attachable catalog An error occurred during deletion e g an I O error Result The utility is not performed Action Check that you can delete this master directory REFERENCED CATALOG CANNOT BE ATTACHED Meaning A creation function has been requested on an object whose first simple name is that of a master directory link on the current site Attaching the corresponding catalog has failed e g the catalog is busy Result No action is performed STARTGEN CANNOT BE MODIFIED Meaning The CATMODIF utility has been requested by specifying the STARTGEN keyword It refers to an open loop generation group whose function is only authorized before any allocation of a generation in this group Result The function is not performed ACCESS
169. 875 101E 0A14 PCF 1872 Error Logging OPEN Statement JCRSWI Subfile Handling Cataloged Messages RESNAV to YETALLOC Return Codes Subfile indicated in ASSIGN not found in specified file An OPEN statement has been issued for a file declared as QUEUED but no ASSIGN statement has been executed for the file The specified form was not found for the libraries Check the form name the library search rules A member is found to be non existent during SWI processing Verify the name of the SWI member Subfile name unknown A catalog has been specified which is not in the library ARG is a negative integer ARG almost a negative integer ARG gt 57 53 overflow ARG less than 57 53 overflow ARG 0 ARG almost zero Symbolic generation error Symbolic generation unknown on volume No segment available The Program Checkout Facility cannot expand its command table Try again or contact the Service Center Segment name error When SYS ERLOG is initialized the pointers cannot be updated The STNs of the pointers cannot be found in the table of correspondence between the addresses of the temporary segments containing the control records and the addresses of the memory segments containing these records 54 9 Messages and Return Codes Directory SGOV SGTPERR SHCTVIOL 54 10 Job Management System Nucleus 1207 Job Management OMH PASCAL RTP System Nucleus 1851 Job Management
170. 92 INITIAL NUMBER OF COMMIT NO TDS TO WAIT FOR DU92 SHARING NOT ALLOWED Meaning The SHARE ofthe file to be saved by Dynamic save is neither MONITOR nor ONEWITE Normally files with other SHARE are saved by static save even under the DYNSAVE command DU92 J NUMBER OF CU NO TDS TO WAIT FOR Jnumber decimal XRON TO WAIT FOR Xron NUMBER OF CU NO TDS TO WAIT FOR value decimal FDB ADDRESS OF A SAVED FILE ptr hexa Meaning Self explanatory DU92 POP ASKED TWICE Meaning Internal error DU92 CST SET BEFORE POP Meaning Internal error DU92 EXCEPTION IN MODULE H_DFSRD_FICB Action Indicate the module where the exception has arisen DU92 EXCEPTION IN DYNSAVE SERVER 12 4 Module H_Dfsrd_IRWI DU93 WORKFILE WITH MORE THAN ONE FDXE CELL SPACE 2 Meaning Internal error DU93 WORKFILE CISIZE MUST BE 4096 Action Change CISIZE DU93 ABNORMAL BUFFER SEGMENT CREATION Return code Meaning Internal error DU93 ABNORMAL RWI INPUT SESSION OPEN Return code Meaning Internal error 47 A2 10UJ 12 3 Messages and Return Codes Directory DU93 DU93 DU93 DU93 DU93 DU93 DU93 DU93 12 5 DU94 DU94 DU94 DU94 12 4 ABNORMAL RWI OUTPUT SESSION OPEN Return code Meaning Internal error ABNORMAL RWI OUTPUT FORMAT SESSION OPEN Return code Meaning Internal error CLEAR SLAVE WORK RWI NOT DONE Meaning Internal error ABNORMAL RWI INPUT SESSIO
171. 95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 12 10 NEGATIVE COUNT OF C1 TDS CU Meaning Internal error NEGATIVE COUNT OF C1 NOT TDS CU Meaning Internal error VALID CI EVENT SENT OUT OF SAVE PHASE Meaning Internal error VALIDATION OF CIS OUT OF SAVED SPACE Meaning Internal error XCBSAVE H_ERRID XCBSAVE H_ERRID Meaning Internal error BEFORE IMAGE IN BITMAP AND NOT IN GIM Meaning Internal error GIM KEY LENGTH ERROR VALIDATION OF CIS Meaning Internal error ABNORMAL DELETE OF A GIM BEFORE IMAGE Return code Meaning Internal error ABNORMAL S_CUR_FILE_NB S_FILE_NB Return code Meaning Internal error END OF SAVE REACHED Meaning The dynamic save server stops running for the current DYNSAVE Error messages may precede this ending message ABNORMAL ENBAP Return code Meaning Abnormal RC on H_ENBAP of the MIDAS buffer of an UFAS before image Internal error BNORMAL DSBAP Return code Meaning Abnormal RC on H_DSBAP of the MIDAS buffer of an UFAS before image Internal error 47 A2 10UJ DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 47 A2 10UJ DU Messages NUMBER OF BEFORE IMAGES decimal value Meaning Total number of blocks of saved file s written on the workfile during this dynamic save ABNORMAL WRBEFORE Return Meaning Internal erro
172. A at STEPOPT or STEP level in JCL GCL then contact the Service Center System Interface WithReading of Sorted End of data has been reached but some data has COBOL SORT Records RETURN been lost during the sort process as the number 47 A2 10UJ of sorted records is less than the number of records sent for sorting Reading another record will produce the another record return code DATALIM 51 35 Messages and Return Codes Directory 51 36 47 A2 10UJ 52 DATANAV to IOFAIL Return Codes This section lists the DATANAV to IOFAIL return codes in alphabetical order of the return code s name mnemonic code Each return code is presented with its name associated hexadecimal value and a generic explanation of its meaning The line following that gives the associated COBOL Status Key value if it exists Here is how this section presents the return codes RETURN CODE Hexadecimal value Generic explanation COBOL Status Key value If a return code is explained in more detail for a particular system component this information is given after the generic explanation There are three columns of information as follows System Component Operation Explanation or Cause The first column System Component gives the name of a system component or utility program from which a return code may have originated for example TDS File Management Unit Record Driver BFAS Sequential Disk File Handling If you
173. A2 10UJ 38 1 Messages and Return Codes Directory 38 2 47 A2 10UJ RY 22 RY23 ry24 47 A2 10UJ 39 RY Messages General Environment RY messages are related to the RecoverY step Pertinent Manuals File Recovery Facility User s Guide ccccccccccccccccccscecseessceseeneeneesesseensees 47 A2 37UF Message Descriptions jasname SEGMENT CREATION IS IMPOSSIBLE Meaning This message is printed in the SYSOUT of the recovery step The segment necessary for recovery cannot be reserved No further operator intervention is possible and the Recovery Step terminates Action See H4 type JAS and Recovery in the File Recovery Facility User s Guide jasname IMPOSSIBLE to ACCESS SYS JRNAL file Meaning This message appears at the console and is printed in the JOR and SYSOUT of the recovery step SYS JRNAL cannot be accessed by the step RY01 is displayed on the console requesting operator intervention Action See File Inaccessibility in the File Recovery Facility User s Guide jasname FD cr ation is impossible for SYS JRNAL file Meaning This message is printed in the SYSOUT of the Recovery Step The system structures necessary for recovery cannot be created No further operator intervention is possible and the Recovery Step terminates Action See H4 type JAS and Recovery in the File Recovery Facility User s Guide 39 1 Messages and Return Codes Directory ry25 ry26 ry
174. ALREADY AN ALIAS IN CULIB DUPLICATE NAME Meaning An attempt was made to create a CU when another CU containing a secondary entry point already exists in the library with the same name as the procedure being compiled EXAMPLE procedure P1 PROC P2 PROC P2 ENTRY END P1 END P2 u Procedure P1 is already compiled In the CU library directory there exist two entries P1 and P2 both entries leading to the same member P2 is said to be an alias of P1 thus a new member P2 cannot be added to the library Result The new CU cannot be created in the library Action Use the LIST command of LIBMAINT CU to get the name of the procedure containing the secondary entry point then rename the new procedure or use a new CU library GPL20 GET CULIB OLD MEMBER member name RC edited return code Meaning To replace an old version of the CU by a new one the compiler reads the old CU An incident occurred while reading a record The return code gives the reason for the incident which is probably due to a system error Result Compiling stops Action Refer to message GPL15 GPL21 PUT CULIB WORK MEMBER member name Meaning The compiler was unable to write a CU record in the CU library The reason for the incident is given by the return code The return code DATALIM indicates the CU library is full Remember that the compiler generates the CU in a work file before replacing the old version of the CU by the new one Thus enough room mus
175. ARDWARE STN 4 Meaning Warning message Result Loading proceeds Action Relink the Load Module EXCEPTION class type exception name parameters IN j number p number AT ADDRESS address Meaning An exception has occurred during loading Result Loading is aborted Action Contact the Service Center LOAD MODULE INCOMPATIBLE WITH HARDWARE COMPILE AND LINK AGAIN Meaning The load module is not compatible with the hardware Scientific compatibility does not exist on your computer Result Loading is aborted Action Compile and link again YOUR PROGRAM NEEDS A VERY LARGE SEGMENT AND THIS CAPABILITY DOES NOT EXIST ON YOUR COMPUTER Meaning The very large segment is not accepted on your computer Result Loading is aborted Action Compile and link again ERROR DURING THE LOADING OF THE CLONES OF THE TASK lt task number gt Meaning An abnormal situation occurred when a load module is loaded Error message LDO1 if there is an abnormal return code or LD10 if an exception occurs identifies the problem Result Loading is aborted Action Contact the Service Center PROCESS lt inf process number gt TO lt sup process number gt HAVE BEEN GENERATED FROM THE LINKER TASK lt task number gt Result Cloning is performed 47 A2 10UJ 26 LK Messages LK messages are produced by the static linker utility Pertinent Manuals LINKER User s Guide rrari neei O EE RAEE 47 A2 10UP Message Descriptions
176. AV DVMGT 18 RSUNKN DVMGT 18 STANDBY DVMGT 19 BUSY DVMGT 19 DVIDFBID write permit for a cartridge library only Hardware problem The given media cannot be mounted or switched to write permit because it has been declared unavailable by the operator The given media cannot be mounted or switched to write permit for a cartridge library only The media is not available The given media cannot be mounted or switched to write permit for a cartridge library only The media is not in the library The given device is STANDBY or seized The allocation of a media has not been performed and for static allocation only the job that requested it has been enqueued Allocation is not currently possible device is OUT or there is an exclusivity conflict but may be possible later and the job may be restarted for static allocation The allocation of a media has been rejected due to a system error or a user error or because it is not possible 47 A2 10UJ Device Management Return Codes in More Detail Device is not available at the moment Incorrect parameters Incorrect device type or device attributes Value out of range or unused due to MIRROR disk pairing Incompatible options within the same job Allocation is not possible and will not be possible later a job has requested more devices than are available in the configuration In some cases for dynamic allocation DVIDFB
177. BAL STATUS xagblstat Action Resynchronization is completed Check XA GLOBAL STATUS to find out the result of resynchronization CUR TCP SES cur_tcpses Response to DISPLAY TDS STATUS TDS SOCKET action where action is 1 BEING CLOSED 2 CLOSED 3 OPENED Unsollicited message which follows CLTS or OTS commands when they are successful TDS tdsname hh mm ss Month Day Year SSS CURRENT TCP IP PARAMETERS Response to DISPLAY _TDS_SOCKET STATUS SOCKET INTERFACE IS s_interface Response to DISPLAY _TDS_SOCKET STATUS 47 A2 10UJ TX95 47 A2 10UJ TX Messages cmdnm ATTACH RM REFUSED COR cornm POOL poolnm TP tpnm US usernm RS reason CC cplcode RC rce TXT text This message is sent to the master when a user is unable to start a transaction on a remote application This message is filtered the TDS Master command MDTDS XCP2TRC 80 must be issued to allow it to be displayed reason is an internal error number in the procedure H_TP7_EVTMGT cplcode text TXINIT ERROR The significant CC values are CC 9 attempting to invoke the CLOSE transaction CC 8 the transaction is declared FOR INQUIRY and the asked security level is different from NONE CC 16 the transaction name is illegal ex LOGON RESTART SYNCPEVT or the transaction is locked or mismatch between authority codes of the invoked transaction and those defined in the catalog XCP2 mailbox with TDSCODE must
178. BCS cannot create or extend its own work space during the execution of a DML verb Result The step execution is aborted Action If possible try to reduce the number of parameters in the DML verbs Contact the Service Center DDM00768 lt error localization gt DATA BASE INCONSISTENCY DETECTED BETWEEN ADDRESS A P L AND ADDRESS Az P Li Meaning Data base inconsistency between two addresses either it points to inconsistent element or it doesn t point to any record Result In Batch environment the step execution is aborted Action Contact the Service Center DDM00769 lt error localization gt PAGE INCONSISTENCY AT ADDRESS Ate Pics Meaning Page inconsistency currency doesn t point to any record or currency points to a record which has another type Result In Batch environment the step execution is aborted Action Contact the Service Center DDM00770 lt error localization gt PAGE INCONSISTENCY AT ADDRESS At Pic Meaning Error detected when CHECK PAGE required through IDS run time options Result In Batch environment the step execution is aborted Action Contact the Service Center 9 23 Messages and Return Codes Directory DDM00771 lt error localization gt DB STATUS value DATA BASE CANNOT BE RESTORED TOITS INITIAL STATE DURING A MODIFY WITH MIGRATION ON CRU A P Li Meaning Recovery is impossible Result In Batch environment the step execut
179. BOV ECPNASG ECPOV EDELERR EFNERR 47 A2 10UJ 1461 FORMS 1812 System Output 0905 1211 0907 1213 1868 SBR Collector and Analyzer 1825 File Management File Storage and Tape Handling File Space Management Utilities TDS DATANAYV to IOFAIL Return Codes Device violation The specified form cannot be processed for the current endpoint Check the form coherence for the current device Device limitation Event control block error After a warm restart inconsistencies were detected at output resequencing that is there is a logical incoherence in the sorting process Contact the Service center Event control block not assigned ECB overflow ECP not assigned to ECB Event completion procedure overflow Ending delimiter error Syntax error Refer to the error message EFN does not match Mismatch between efn and tape position Modify efn The specified file name is incorrect Make sure the file name contains SYS or CATALOG Invalid value for the PRTFILE parameter in the DUMP TDS command The name of the file given as PRTFILE must not have attributes according to the GCL syntax Change the name of the PRTFILE 52 13 Messages and Return Codes Directory EFNUNKN EMPTPLST EMPTY 52 14 1007 Any File Organization Catalog Management File Management Journalization RBF System Output TDS Unit Record Driver Diskette 1 20 00A0 Job Management MCS
180. BT COUNT wdnavnb LGWAITABT COUNT Ilgwaitnb DIRTY READ ABORT dirtabtnb BUFOVABT COUNT bufovnb SERIALIZATION serialnb Response to DISPLAY _TDS STAT MAX TM SES mxtmnb CUR TM SES curtmnb MAX XCP1 SES mxxcpl1lnb CUR XCP1 SES curxcpinb MAX XCP2 SES mxxcp2nb CUR XCP2 SES curxcp2nb MAX VIRT SES dummax CUR VIRT SES virtsesnb PMOS COR COUNT pmossesnb Response to DISPLAY _TDS STAT authcodel authcode2 authcode32 Response to DISPLAY TX spec tx AUTHCODE MAX SIMU COUNT init_simu CUR SIMU COUNT cur_simu FROZEN SIMU COUNT frz_simu Response to DISPLAY TDS SIMUL NOTE The last 2 counters are always set to zero because they are not used SM LIBRARY 1 smlib1 SM LIBRARY 2 smlib2 SM LIBRARY 3 smlib3 Response to DISPLAY TDS SMLIB XCP2 SERVICE USED 4 xcp2used PRIORITY priority TRANSACTION STORAGE SIZE txstosz ACCOUNTING account FORM form Response to DISPLAY TX spec tx 47 A2 10UJ TX Messages TX12 MESSAGE mame of the transaction FIRST ASSIGNED TPR name of the tpr CLASS n alphabetic IMPLICIT COMMITMENT Y N AUTOMATIC UNMAPPING Y N Response to DISPLAY TX spec tx TX13 DISPLAY _TX txnm message text where message text is 1 FILE SECURITY OPTION SUPPRESS BEFORE JOURNAL DEFERRED UPDATES 2 LIST OF AUTHORITY CODES 3 NO CLAUSE SPECIFIED 4 SHARED READ FOR 5 SUPPRESS CONCURRENT ACCESS CONTROL FOR 6 7 8
181. Batch environment the step execution is aborted Action Check the schema subschema name and library name specified DDM00396 lt error localization gt DD OBJECT member name IN LIBRARY OF EFN efn IS NOT AN INTEGRATED SCHEMA SUBSCHEMA Meaning The object found in the library specified does not correspond to an IDS schema subschema it may be a file schema subschema Result In a Batch environment the step execution is aborted Action Check the schema subschema name and library name specified DDM00397 lt error localization gt SCHEMA schema name IN LIBRARY ASSIGNED TO IFN DDLIBi IS INCOMPLETE DMCL MISSING Meaning The IDS session tried to use a schema that was not completely described no DMCL command TRANSLATE of the MNDD or DDLPROC utility has been performed for it Result In a Batch environment the step execution is aborted Action Check that the schema involved is the one expected Perform the DMCL command TRANSLATE if relevant Messages and Return Codes Directory DDM00398 lt error localization gt THE SAME EFN IS ASSIGNED TO TWO IFNS QUALIFY SCHEMA NAME schema name BY IFN INSTEAD OF EFN Meaning The library where the object schema is to be found has been specified in IDS run time options through its external file name but there exist in the JCL several ASSIGN statements defining objects schema libraries ifn DDLIBi which specify the same external file name and possibly different
182. C Basic Level Access BN Binder BOO Bootstrap BPM Buffer Pool Management CA Communications Access Method CBL COBOL Compiler CF System Configuration CG Catalog Specific Access Method CK Checkpoint Restart CL PRLOGC Utility CS Unbundling Facilities CX Calculate Key DCT Catalog Management DDM Data Base Control System DBCS DF File Management DEFINE part DFA File Assignment 47 A2 10UJ 47 A2 10UJ DFR DG DI DIO DK DL DMG DN DP DPA DPS DS DT DU DUF DUM DV DY EL EV EX FDS FECM FFU FHU FM FN FO FOR FP FPU FR FRM FRU FS FS FSR FVL FVP GAC GPL HDR Interpreting Error Messages File Recovery Database Reorganization Data Dictionary Handling Interface DML Interpreter for T amp D Diskette Driver Data Base Validation Utility Data Manipulation Language Processor File Migration Tool Data Base Analyzer Utility Data Base Print Utility Dump Accounting Information DUMPACT Dump System File Description Processing Data Base Tools Dynamic Save UFAS Files All Organizations Dummy Access Method Device Management Dynamic Addresser for sharable modules Error Logging Component Event Management Exception Handling File Label Description Front End Processor Control and Management File Format Utility File Handling Utilities FORTRAN Mathematical Package Front End Network Processor Support FORTRAN Compiler Formatting for Lis
183. C Requested mailbox is local and saturated 8E Requested node is local and requested mailbox is not defined 8F Duplicate name owner creating a MAIN user ID in dictionary 90 USERUNKN return code sent from catalog 91 PROJUNKN return code sent from catalog 92 BILLUNKN return code sent from catalog 93 STTNUNKN return code sent from catalog 94 APPLUNKN return code sent from catalog 95 RLUPUNKN return code sent from catalog 96 RLBPUNKN return code sent from catalog 97 RLAPUNKN return code sent from catalog 98 RLSPUNKN return code sent from catalog 99 PSWVIOL return code sent from catalog 9A Unexpected return code sent from catalog 9C Catalog not validated or submitter identification set not given by initiator and destination mailbox specifies CTL or NCTL 0 9E Unexpected type returned by dictionary for the destination mailbox Wrong destination mailbox name OF NOTDONE return code from dictionary when creating USER ID AO Destination session node unknown Al Neither the caller s mailbox nor the destinations mailbox is an application mailbox and the queue monitor is not available A2 Requested node is remote and the corresponding work station is not active 47 A2 10UJ 47 A2 10UJ A3 A4 AS A6 A7 A8 A9 AA AB BO B6 B7 B8 B9 CO PT Messages Requested node is remote and the corresponding work station does not exist Requested node is remote and the corresponding work station is not active
184. C edited return code EFN efn SUBFILE subfile name Meaning This message appears only in the JOR of the WRITER service job and is sent to the submitter of the output Refer to the appropriate Console Messages Directory for a detailed description HELD ddnn ron oseq CANCELLED WRITER TERMINATED RC edited return code ON SYSOUT FILE Meaning This message appears only in the JOR of the WRITER service job For a detailed description refer to the appropriate Console Messages Directory ddnn WRITER TERMINATED RC edited return code Meaning This message appears only in the JOR of the WRITER service job For a detailed description refer to the appropriate Console Messages Directory IFN ifn IS NOT IN SYSOUT FILE FORMAT EDITION PARAMETERS WILL NOT BE TAKEN INTO ACCOUNT FOR FURTHER OUTPUT REQUESTS OF THIS FILE Meaning This message warns the user that the SYSOUT mechanism cannot be used for the creation of a permanent SYSOUT file i e editing of the file is not performed at file creation time If file printing is requested by the step creating the file JCL statement SYSOUT in step enclosure the editing parameters specified in the DEFINE and SYSOUT statements will be taken into account But for further output requests of this file WRITER statements the editing parameters specified at file creation time are lost For these requests the default value for editing parameters will be used unless the editing parameters are re specified in
185. CE ATTRIBUTES FOR CT DEVICE Meaning A cartridge device is requested on a site equipped with a cartridge library or with different cartridge drive models The device attribute must precisely specify which class of device is requested The device allocation is rejected Result The step cannot be started Action Correct the command DEVCLASS parameter must be updated in a JCL ASSIGN statement DV53 ILLEGAL ACCESS TO THE VOLUME volnm OF DEVCLASS CT LIB Meaning The access to the volume volnm is not allowed This check is performed only on cartridge devices connected to a library The device allocation is rejected Result The step cannot be started Action There are two possibilities 1 Correct the command MEDIA or DEVCLASS parameter must be updated in a JCL ASSIGN statement 2 Update the configuration file used by CLC or CLX refer to the Cartridge Tape Library User s Guide or the CTL UNIX Server User s Guide for further information 47 A2 10UJ 14 11 Messages and Return Codes Directory 14 12 47 A2 10UJ 15 DY Messages General Environment DY messages are produced by the Dynamic Addresser component of the system that manages the sharable modules SM Message Descriptions DY02 ERROR DETECTED SHARED MODULE lt SM_name gt NOT FOUND Meaning The SM is not stored on the backing store Action Load the SM onto backing store DY02 ERROR DETECTED NO SM LOADED FROM L
186. CK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO START A SERVANT PROCESS Action Check that you have not tried to run a multi process sort with the mono process LM or with a multi process LM which was linked with insufficient few processes declared with respect to the value of NBSORT INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem 47 A2 10UJ TD34 04 TD35 01 TD35 02 TD35 03 TD35 04 TD35 05 TD35 06 47 A2 10UJ TD Messages UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO CREATE SEGMENT Meani
187. CL must be corrected Return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF INTERNAL SORT ERROR XX Module number hexa digits 2 where the internal error has been detected YY Number hexa digits 2 of the internal error detected 42 19 Messages and Return Codes Directory TDXX 17 TDXx 18 TDXxX 19 TDXxX 20 TDXX 21 TDXX 22 TDO6 01 TDO6 02 42 20 Action Report the problem to Technical Support UNABLE TO LAUNCH CHANNEL PROGRAM XX Module number where the error has been detected Action Report the problem to Technical Support I O ERROR ON WORK FILE WKDISK WRITE XX Module number where the error has been detected Meaning Detailed information completion code involved address is given below WRONG INPUT RECORD LENGTH FOR INCLUDE OMIT KEY ARRANGE SUM XX Module number where the error has been detected Meaning The involved record is too small to hold all the indicated fields Action Correct the user program OVER 2147483647 INPUT RECORDS XX Module number where the error has been detected Meaning The number of records exceeds the capacity of 31 bits more than 2 31 1 records ATTEMPT TO REQUEST A SORTED RECORD AFTER END OF SORT OUTPUT Meaning Self explanatory Action The user program Sort output procedure must be changed or problem in system processor must be reported to Technical Support of this system processor KE
188. CNCT DBG ZZZZZZZZZZZZ gt gt V YYYYYY I CCC S XXXX HEXA ADDR FFFFFFFF Meaning This version of the MV37 message applies to Technical Statuses from TS7356 MDTDS TRACE 02 for XCP1 correspondents TRACE 01 for TM correspondents and TRACE 03 for TM and XCP1 correspondents The ZZZZZZZZZZZZ value is no correspondent name available CPCNCT error detection in H_TP7 CPCNCT component or CORRESPONDENT NAME V YYYYYY is the verb name CNxxxx or CPxxxx from H_TP7 CONNECT or H_TP7_CPCNCT RJCP or CLCP from H_TP7_CONNECT rejection I CCC is an internal error code decimal REASON RRRR is the VCAM reason S XXXX is the rejection code from TDS if V RJCP or CLCP or the VCAM status hexadecimal ADDR FFFFFFFF is the address of the connection rejection if the value of ADDR is not FFFFFFFF Action This information is used by your Customer Service Center To de activate this message enter the command MDTDS TRACE 00 TIMEOUT UPON SYNCHRONOUS SEND USER user_name TPR tpr_name Meaning Warning message This message is sent when the TDS generation clause MAXIMUM WAIT TIME UPON SYNCHRONOUS SEND IS nmin is present and when the nmin value is exhausted during a SEND verb This means that network acknowledgement was not received during the WAIT TIME 47 A2 10UJ MU and MV Messages MV39 COLD RESTART FORCED DUE TO ABORT DURING PREVIOUS COLD RESTART Meaning An abort occurred during th
189. COBOL statement indicates that the memory size reserved for the compiler can be extended during execution This message indicates the amount of extra memory that has been allocated and the time during which it has been allocated CBLO6 environment error explanation Meaning This message reports errors detected by the compiler that deal with the environment rather than the source program itself For example e the source to be compiled has not been found in the specified library e the file specified in the CULIB parameter is not in a CU library These problems are usually due to errors when specifying parameters of the COBOL JCL statement Action Check the COBOL JCL statement 4 3 Messages and Return Codes Directory CBLO7 SPECIFIED WORKING SET TOO SMALL extra stack USED Meaning The size specified in SIZEOPT is too small for the compiler to run in an acceptable way The compiler uses more memory if it is available CBL11 DISPLAY program name console displayed string Meaning This message prints in the JOR the contents of a message that was sent by the program to the main console or to an alternate console as a result of DISPLAY UPON ALTERNATE CONSOLE CBL12 IFN ifn RELATIVE KEY CANNOT BE USED Meaning This message may appear when a program declares a file with ORGANIZATION IS RELATIVE in the SELECT clause when the program was run on a file whose physical organization was not RELATIVE This mess
190. COL ERROR OR NEGOTIATION FAILED 0A PRESENTATION PROTOCOL ERROR OR NEGOTIATION FAILED 15 TIME OUT ON MESSAGE GROUP INITIATION 17 INCORRECT ACCESS RIGHT FOR MB 18 INCORRECT ACCESS RIGHT FOR THE APPLICATION 19 PRENEGOTIATED MESSAGE PATH DESCRIPTOR UNKNOWN 1A SECURITY VALIDATION FAILED 1B ACCEPTOR MAILBOX EXTENSION UNKNOWN 1D MB NUMBER INVALID 21 INACCESSIBLE NODE 40 NODE UNKNOWN 41 PATH NOT AVAILABLE 42 DUPLICATED USER ID 43 DUPLICATED STATION ID FOR REMOTE BATCH The following supplementary REASON values are for Maintenance Purposes only TBL NE hh Reason 00 RESTART RECEIVED 08 TRANSPORT PROTOCOL ERROR OR NEGOTIATION FAILED OB GETSEM OVERLOAD WRONG INQUIRY 0C JOB SUBMISSION ON RFA INVOLVES DUPLICATE USER 0D JOB CLASS Q NOT STARTED OE NO MEMORY RESOURCES OF NO J PROCESS OR P PROCESS AVAILABLE 10 LINE LENGTH NOT SUPPORTED 11 NUMBER OF SERVICE JOBS SATURATED 33 11 Messages and Return Codes Directory 33 3 3 33 12 C_REASON ANOMALIES IN START JOB JOB STEP ABORT OR MESSAGE REJECTT ACCEPTOR MAILBOX EXTENSION INOPERABLE NORMAL DISCONNECTION SATURATION FAILED NEGOTIATION DOUBLE CONNECTION INCOMPATIBLE PLUGS TIME OUT T1 AT TRANSPORT LEVEL OCCURRED TIME OUT T2 AT TRANSPORT LEVEL OCCURRED PROTOCOL ERROR The following values for C REASON apply when the STATUS value is 35 In some messages C_REASON appears as BYTE3 or ERROR TBL NE hh C_Reason 8
191. CREATE WORK FILE DEFINITION Meaning A dynamic FD file definition table is required and cannot be created A return code from H_CRFD is given It could be a linkage problem ENTRYOV UNABLE TO OPEN WORK FILE Action Check the work file state and assignment If these are correct report the problem to Technical Support UNABLE TO RETRIEVE WORK FILE EXTENTS Action Report the problem to Technical Support MUCH TOO MANY EXTENTS IN WORK FILE Action Report the problem to Technical support The installation s resident disk space must be reorganized WORK FILE IS NOT ALLOCATED IN CYLINDERS Action Correct the user program ALL THE WORK FILE VOLUMES ARE NOT PREMOUNTED Action Correct the JCL WORK FILE IS NOT ON DISK Action Correct the JCL ALL THE WORK FILE EXTENTS ARE NOT IN CYLINDERS Meaning Abnormal file Action Report the problem to Technical Support SEVERAL DISK TYPES FOR WORK FILE Action Correct the JCL Contact your Service Center INSUFFICIENT MEMORY SIZE Meaning The SIZE parameter is too small in relation to the other parameters Action Correct the user program WORK FILE OVERFLOW Meaning The work file has been extended as much as possible It is still insufficient to hold the whole input file Either the work file is actually too short or 47 A2 10UJ TD04 14 TD04 15 TD04 16 TD04 17 TD04 18 TD04 19 TD04 20 TD04 21 47 A2 10UJ TD Messages some incorrect parame
192. Center VMFCL WORK RC edited return code Meaning There was a problem with the management of the virtual memory files used by the compiler the return code gives the reason Such a message indicates a system error Result Compiling stops Action Contact the Service Center OPEN SYSOUT RC edited return code Meaning The compiler was unable to OPEN the standard SYSOUT in order to create the compiler report the return code gives the reason Such an error is unusual and may indicate a system error Result Compiling stops but the CU is already produced in the CU library Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center SEGSIZE FCB POOL RC edited return code Meaning There was a problem with the management of the virtual memory files used by the PASCAL compiler the return code gives the reason If the return code is SGOV code sent by VMM and if the incident occurs during the FIXUP phase phase name shown by and following the PAS45 message the reason may be an overflow in the ISN table of the compiler i e the number of record tables stated in the program is too high Result Compiling stops 31 9 Messages and Return Codes Directory PAS39 PAS40 PAS42 PAS43 PAS48 31 10 Action If the situation is as described above use dynamic allocation with NEW DISPOSE for certain of the larger ob
193. Codes Directory JB54 JB55 JB56 JB57 JB58 JB59 23 4 LOAD MODULE NAME MISMATCH ACTUAL NAME 1m name Meaning The load module identification found in the member of the library does not match with the load module name from the JCL statement STEP This error arises for example when the library specified in the STEP statement is not a load module library but a source library Result The step is aborted Action Check the JCL statement STEP Contact the Service Center if necessary UNABLE TO READ LOAD MODULE Meaning System error probably due to an incorrect load module format Result The step is aborted Action Contact the Service Center UNABLE TO CLOSE LOAD MODULE Meaning System error possibly due to an I O error Action Check the disk pack and disk drive supporting the file REQUESTED NUMBER OF ACTIVE PROCESSES AMOUNT OF MEMORY EXCEEDS CAPACITY OF SYSTEM Meaning The step requests more resources than are available in the system e g a JCL statement SIZE indicates a memory size greater than the size of the system memory Result The step is aborted Action Reduce the requested number of processes or increase the amount of memory space CHECKING OF VACANT ENTRIES NOT AVAILABLE Meaning System error Action Contact the Service Center STEP INITIALIZATION KILLED SEV 5 RC Return Code STEP INITIALIZATION ABORTED SEV 3 RC Return Code STEP INITIALIZAT
194. Configurator CONFIG Configuration Utility for GCOS 7 CPI Common Programming Interface CPU Central Processing Unit CU Compile Unit or Commitment Unit DBCS Database Control System DKTT Diskette DMU Data Management Utilities DNET DATANET DOF Device Oriented Format Distributed Operator Facilities DPAN Dump Analyzer DPS Distributed Processing System DSD Dynamic Status Display 50 7 Messages and Return Codes Directory 50 8 DSL Data Services Language DWS Declared Working Set DYNAD Dynamic Memory Addressor ECB Event Control Block ECMA European Computer Manufacturers Association EFN External File Name EOD End of Data or Diskette EOF End of File EOV End of Volume FCB File Control Block FECB File Extended Control Block FS File Separator GAC General Access Control GCL GCOS 7 Command Language GCOS General Comprehensive Operating System GPL GCOS Programming Language GTP Generalized Transfer Processor HPL Honeywell Programming Language ICA Individual Control Attribute IDS Integrated Data Store IDX Index part of UFAS IFN Internal File Name INIT Initialization TBL NE V O Input Output IOF Interactive Operation Facility IRM Interactive Resource Manager IRT Installation Resource Table ISD Indirect Segment Descriptor JCL Job Control Language JOR Job Occurrence Report LDN Logical Device Number LM Load Module MAM Message Access Method MBZ Must Be Zero i e the value of a given field MCS Message Cont
195. D FOR RECORD FORMAT UNDEFINED Meaning The data record compaction is not supported for records with format undefined Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn BLOCKSIZE SHOULD BE gt RECSIZE 4 V VB Meaning The block size is not compatible with the record size according to the format of the records V or VB at least 4 bytes more than the record size must be reserved in the block to build the record header Result The library file cannot be opened and an abnormal return code is set by the access method 47 A2 10UJ QLO8 QLO9 QL10 QL11 QL15 47 A2 10UJ IFN IFN IFN IFN IFN QL Messages Action Such a message normally indicates a system error Contact the Service Center ifn COMPACTION NOT SUPPORTED FOR RECORD FORMAT F OR FB Meaning The data record compaction is not allowed for fixed length records Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn ILLEGAL RECSIZE VALUE 0 OR NEGATIVE Meaning The provided record size is negative or zero Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicat
196. DIFIED BY SYSADMIN ONLY Meaning Modification of the volume list of a file in the catalog has been requested but the project has no right to perform this operation For security purposes this operation is reserved for the system administrator Result The utility is not performed Action None 8 5 Messages and Return Codes Directory DCT24 DCT26 DEVCLASS PARAMETER DOES NOT MATCH WITH CATALOGUED DEVCLASS Meaning You tried to change the DEVCLASS characteristic of a file using the CATMODIF utility where the specified file is a multi volume file that already has more than 10 assigned medias You may not specify a device class which is different from the existing one Result The utility is not performed Action Check the DEVCLASS corresponding to the already assigned medias by using the CATLIST utility ABNORMAL PROCESSING OF JOURNAL Meaning A shift function has been requested with journal option specified and journal processing failed Action Shift function is performed without journal processing DCT27 NEW MASTER DIRECTORY MAY ONLY HAVE CATALOG FILE ON NEXT LEVEL DCT30 DCT33 8 6 Meaning A CATMODIF utility has been submitted specifying the newname parameter The renaming will not be performed if the catalog is AUTOATT and if at least one object already exists under the new master directory Result No action performed Action Try to rename starting from an empty
197. DRESS Remettez cet imprim a un responsable Bull S A ou envoyez le directement a Please give this technical publications remarks form to your Bull S A representative or mail to Bull CEDOC 357 Avenue Patton BP 20845 49008 ANGERS Cedex 01 FRANCE
198. E 20 OPEN DFPRE 20 SEQERR File Management Return Codes in More Detail Set in the following cases Files are being concatenated and the processing mode is not INPUT Files are being concatenated and the access mode is not sequential An allocation request has been made for a disk file and MOUNT is not equal to ALL The access level specified for a reopen is incompatible with the value specified for the previous open For a file in non standard format file with a native label the processing mode is not INPUT An invalid ifn has been specified The specified ifn is not assigned The current media does not belong to the media list specified for the assign The specified ifn is currently active for another primitive The specified ifn is already open The first volume sequence number in the media list is incorrect 57 17 Messages and Return Codes Directory DFPRE 20 WRONGPMD DFPRE 21 ARGERR DFPRE 21 CONFLICT DFPRE 21 DATALIM DFPRE 21 DATANAV DFPRE 21 DUMMY DFPRE 21 EFNUNKN 57 18 Set in the following cases The processing mode specified is invalid There is an inconsistency between the device and the processing mode because The specified processing mode is IA IO or UP for a tape file The specified processing mode is not input for a tape file with a non standard label The specified processing mode is REVERSE for a disk file The specified processing mode is not
199. EC 1A1B Mathematical Package SSQRNG 1418 Mathematical Package STAGEERR 1C1D STAKERR 1818 Job Management Load Module Loader PCF System Nucleus Dynamic Addresser Loader VMM STAKOV 120A 120E STANDBY 1E06 54 16 System error incorrect address given when accessing a record Contact the Service Center Sort unbundled Incorrect SORT unbundling or SORT has not been purchased Contact the Service Center ARG gt 175 36 overflow sinh ARG gt 10 8 loss of precision The sine cosine function argument gt 10 8 loss of precision simple precision Square root of negative number The square root of a negative number is undefined simple precision Processing state has not reached the expected stage Specified segment should not be a stack The description of a non zero stack segment is incorrect The stack is ofring 1 or ring 3 and must not be in Control Memory Link the load module again with the correct options for these segments The Saving Area Mask SAM is not zero in the execution stack and the Dynamic Addresser DYNAD cannot switch sharable modules to clean it Send a STAR The stack is damaged due to an error Modify the user code Internal system error Contact the Service Center Attempt to delete or change the size of a stack segment Stack overflow Device stand by 47 A2 10UJ STANOV STANPREC STATEERR STERR STILLMSG STILLPG STI
200. ED UNAVAILABLE BY THE USER Meaning The operator has typed a Cancel Request command which refers to the same volume which is requested by the command Following a DV44 message waiting allocation of volume the user has entered either CANCEL or CAN or simply Break Result This error usually occurs at step initiation time and the step cannot be started Action Contact the operator DEVICE OR CONTROLLER device id IS NOT IN HELD STATE Meaning The Test and Diagnostic request made via a DDVASG statement refers to a device which is not in the HELD state NB T amp D can only be performed on a HELD device Result T amp D sets the device in the HELD state and will attempt to reassign it Action None MEDIA volname IS WORK AND ALREADY ASSIGNED Meaning A work volume has been assigned by a first job A second job tries to assign the same volume by its name Result The error is usually detected when the step is initiated The step of the second job cannot start It is aborted with DVMGT 19 DVIDFBID Action Assign another media in the second job or wait until the media is deassigned in the first job 47 A2 10UJ Dv29 DV30 DV31 DV32 DV33 DV34 47 A2 10UJ DV Messages ANY MEDIA OPTION IS ALLOWED FOR TAPES CARTRIDGES AND DISKETTES ONLY Meaning The ANY MEDIA option was used for a device type for which it is invalid Result The step cannot be started Action Correc
201. EDIA LIST Meaning Catalog creation CATBUILD has been requested but there already exists in the SITE CATALOG a file entry with the same name and which contains a valid volume list that is the catalog has already been created Result The utility is not performed Action Ensure that existing file is correct directory name DIRECTORY NOT FOUND name name Meaning A catalog creation CATBUILD has been requested but the directory in which the catalog is to be created does not exist in the SITE CATALOG It is not possible to create a catalog in a directory that belongs only to a private catalog Result The utility is not performed Action Check contents of SITE CATALOG UNSTABLE RECORD ENCOUNTERED PERFORM CATCHECK Meaning The CATMOVE utility is requested and an unstable record is found Result The utility is performed until the error has been encountered In the example of the CATMOVE utility a part of the original structure was not moved Action Perform CATCHECK and submit the utility again DUPLICATE NAME MLINK CANNOT BE CREATED FOR MASTER DIRECTORY Meaning Appears when you submit CATMODIF utility with the AUTOATT keyword and you want to make a private catalog auto attachable An error occurs if at least one of the directories of the catalog is already known in the site catalog either as a master directory or as a master directory link for another catalog Messages and Return Codes Directory DCT72 DCT
202. EGMENT SIZE Meaning The buffer segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support 47 A2 10UJ TD10 TD10 TD10 TD10 TD10 TD10 TD10 TD10 TD10 47 A2 10UJ 07 08 09 10 11 12 13 14 15 TD Messages UNABLE TO MODIFY SEGMENT ATTRIBUTES Action Report the problem to Technical Support UNABLE TO MODIFY SEGMENT ATTRIBUTES Action Report the problem to Technical Support UNABLE TO CHANGE SEGMENT SIZE Meaning The generated code segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The node segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The node segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning A buffer segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE
203. ER HAS BEEN STOPPED Meaning GT Writer cannot start a Driver because H_TWCOMM has been stopped Who receives the message The TWCOMMSUB 47 A2 10UJ TW36 TW37 TW38 TW39 TW40 47 A2 10UJ TW Messages DRIVER lt driver gt TERMINATED Meaning A TTW command is issued for a Driver being started Who receives the message The TWCOMMSUB WORKSTATION CREATION FAILED Meaning This message is sent when a Driver starts if a workstation cannot be activated Who receives the message The TWCOMMSUB NOTE The Driver is aborted MAILBOX CREATION FAILED Meaning This message is sent when a Driver starts if a mailbox cannot be activated Who receives the message The TWCOMMSUB NOTE The Driver is aborted MESSAGE PATH CREATION FAILED Meaning This message is sent when a Driver starts if a message path cannot be activated Who receives the message The TWCOMMSUB NOTE The Driver is aborted TIMER REQUEST FAILED Meaning This message is sent when a Driver starts if GTWriter cannot activate the timer which handles re connections connections attempts and requests for paper forms mounting Who receives the message The TWCOMMSUB NOTE The Driver is aborted 46 13 Messages and Return Codes Directory TW40 TIMER REQUEST FAILED Meaning This message is sent when a Driver starts if GTWriter cannot activate the timer which handles the auto mechanism Who recei
204. ER THAN LASTVOL Meaning Issued during an ASSIGN if the value of parameters FIRSTVOL and LASTVOL are inconsistent Result This error is detected at step initiation time the step cannot be started Action Check the JCL DF31 ifn FIRSTVOL GREATER THAN NUMBER OF VOLUMES Meaning Issued during an ASSIGN if the value of parameter FIRSTVOL is greater than the number of volumes of the specified file Result This error is detected at step initiation time the step cannot be started Action Check the JCL DF32 devclass DVC NOT SUPPORTED Meaning The device class specified for a file is not currently supported such a message may indicate a system error Action Contact the Service Center DF34 devclass INCOMPLETE DEVICE ATTRIBUTE SPECIFICATION Meaning An ASSIGN was issued with a device type MS or MT but with no device attributes or with incomplete device attributes Consequently the system assumes default values for non provided attributes but this may result in unpredictable results e g an M400 disk can be requested while the disk is of M452 type Result Step initiation proceeds but may abort later for example because the operator issued a Cancel Request command CR in response to request to mount a disk on an incorrect drive Action The JCL must be corrected DF43 efn NO DEFINED VOLUMES CHECK CATALOG MEDIA LIST Meaning Issued during an ASSIGN on a file which does not have a media list and in one of following cases
205. ER and the TWCOMMSUB lt Rxxxx gt UNABLE TO DELIVER_PTEST lt retcode gt Meaning The access to a record of the environment subfile failed or this record is inconsistent during PTEST processing Who receives the message The TWCOMMSUB and the OWNER lt Rxxxx gt UNABLE TO ASSIGN lt media gt NOT MOUNTED Always followed by a TW11 message Meaning The media disk is not mounted Who receives the message The SUBUSER and the TWCOMMSUB 47 A2 10UJ Twos Twos Twos Twos Twos Twos Twos Twos 47 A2 10UJ TW Messages lt Rxxxx gt UNABLE TO ASSIGN DRIVES OR FILES BUSY Always followed by a TW11 message Who receives the message The SUBUSER UNABLE TO ASSIGN DRIVES OR ENVIRONMENT LIBRARY BUSY Always followed by a TW11 message Who receives the message The SUBUSER UNABLE TO ASSIGN DRIVES OR ENVIRONMENT LIBRARY BUSY Sent in case of PTEST processing Who receives the message The TWCOMMSUB and the OWNER lt Rxxxx gt UNABLE TO ASSIGN lt retcode gt Always followed by a TW09 message Who receives the message The SUBUSER and possibly the TWCOMMSUB depending on the return code lt Rxxxx gt UNABLE TO ASSIGN_ENV lt retcode gt Always followed by a TW11 message Who receives the message The SUBUSER and possibly the TWCOMMSUB depending on the return code UNABLE TO ASSIGN_ENV lt retcode gt Sent in case of PTEST processing Who receives the message The
206. ES Action Report the problem to Technical Support UNABLE TO CREATE SEGMENT Meaning The segment used for large COBOL key tables cannot be created A return code from H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem UNABLE TO CHANGE SEGMENT SIZE Meaning The segment used for large COBOL key tables cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The common sort segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning A record storage area segment cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO MODIFY SEGMENT ATTRIBUTES Action Report the problem to Technical Support 47 A2 10UJ TDO3 14 TDO3 15 TDO3 16 TD03 17 TD03 18 TD04 01 TD04 02 47 A2 10UJ TD Messages UNABLE TO CREATE SEGMENT Meaning A return code H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insuf
207. ETHOD ADDITIONAL INFO lt info gt ON BLOCK NUMBER lt block_number gt Meaning An inconsistency is detected in the directory block Result Recovery cannot be performed and the file cannot be accessed Action This is a system error Contact the Service Center NO DATA RETRIEVED SUBFILE HAS BEEN SET EMPTY Meaning No data blocks were found for a given subfile during salvaging Result The subfile is set empty in the directory Action None SUBFILE IS LEFT UNBOUNDED IT IS NOW READ ONLY Meaning An I O error prevented the salvager from bounding the subfile Result The subfile is now read only Action Copy the subfile to another one UNABLE TO WRITE TO DATA BLOCK NUMBER lt block_number gt Meaning An I O error occurred while writing to a data block during salvaging Result The subfile cannot be bounded Message 23 is sent Action Refer to message 23 UNABLE TO ACCESS TO DATA BLOCK NUMBER lt blk_number gt Meaning The block is not in the Data Part of the file or an I O error has occurred Result The last valid block is marked as the end of the subfile Action Depends on the next message either 22 or 32 SUBFILE HAS BEEN BOUNDED Meaning The subfile has been found opened and has been bounded to the last written block Result The subfile is recovered Action None 35 15 Messages and Return Codes Directory QL33 QL34 QL36 QL37 QL38 QL43 QL44 35 16
208. F unit header of an expanded member in the output library The return code indicates the reason It is usually a system error Result The processing of the current unit contains errors but the expanded member is available but the expanded member is available Processing of the next unit if any starts Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC27 PUTX IN UPDATING OUTPUT CR101 FOR output_unit_name RC edited_return_code Meaning An error has occurred while updating the SSF unit header of an expanded member in the output library The return code indicates the reason It is usually a system error Result The processing of the current unit contains errors but the expanded member is available but the expanded member is available Processing of the next unit if any starts 47 A2 10UJ 28 7 Messages and Return Codes Directory MAC28 MAC29 MAC30 28 8 Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center CLOSES IN UPDATING OUTPUT CR101 FOR output_unit_name RC edited_return_code OPEN OPEN Meaning An error has occurred while updating the SSF unit header of an expanded member in the output library The return code indicates the reason It is usually a system error Result The processing of the current
209. FTER statement in the job description perform a warm restart Otherwise perform a TDS cold start with the same JCL Type of message Warning Dump taken No Recipient of the message TDS Master 29 12 47 A2 10UJ MU and MV Messages MU56 UNEXPECTED CALL TO FILE ERROR HANDLER Action None internal error A dump is provided The TDS session resumes Type of message Warning Dump taken Yes MU57 CANNOT COMPLETE FILE RECOVERY IFN xxxxxxxx Action None internal error which does not prevent the TDS application from executing Ensure that the specified ifn is available and perform the recovery procedures if necessary Type of message Warning Dump taken No Recipient of the message Main Operator MU58 INTERNAL ERROR IN M TRANSACTION Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU59 INTERNAL ERROR IN VCAM INTERFACE VCAM STATUS HEXA xx Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU60 DEFINE EXISTS BUT JOURNAL NOT DECLARED Action Remove the ASSIGN USERJRNL DUMMY statement or regenerate the TDS application with user journalization Type of message Warning Dump taken No Recipient of the message Main Operator 47 A2 10UJ 29 13 Messages and Return Codes Directory MU61 MU63 29 14 ERROR IN FORM ACTIVAT
210. File Organizations Other Than UFAS FORMS TDS UFAS EXTENDED Unit Record Driver Diskette 51 28 Resource Status READ WRITE Master Command GET PUT FORCE The maximum number of attempts to obtain buffer space in the buffer pool has been reached Enlarge the buffer pool Number of blocks read does not correspond to the number written in the EOV or EOF label A form has a line which includes more than 16 attributes device VIP 7804 Modify this line When using the M MDTDS SIMUL xxx command the resulting simultaneity is greater than the maximum allowed for TDS Modify the STDS and generate again The checkpoint counter requests a checkpoint Checkpoint condition is met 47 A2 10UJ COUNTOV 120F ABNCCAD to DATALOSS Return Codes Count overflow GAC EXTENDED Lock List Handling An attempt has been made to allocate more MCS Network Generation Physical I O Access Queued Files System Nucleus Internal UFAS EXTENDED CPERR 1804 File Management Journalization MCS Physical I O Access Internal UFAS EXTENDED 47 A2 10UJ OPEN Task Management File Storage and Tape Handling Various Channel Program Operations GAC lock list entries than the limit defined by NUMLOCK Increase the value of NUMLOCK Verify the GAC CONFIG parameter LOCKSIZE The threshold of I O errors defined at initialization has been exceeded Any pending T O operations are not executed and
211. File Salvager completes the renaming process ifn CHNAME FUNCTION COMPLETED BUT LOGICAL TRACKS MAY BE LOST Meaning The CHNAME command with the REPLACE option has completed Result The name is changed but some logical tracks may be lost ifn CHANGE NAME FUNCTION COMPLETED Meaning The CHNAME command with the REPLACE option is completed successfully ifn CANNOT FORMAT FILE MUST BE AT LEAST n CYLINDERS TRACKS Meaning The SIZE allocation parameter has not been specified large enough to contain the Block Allocation map and the directory n is suggested as a suitable value Result The file cannot be opened and the return code FILEOV is set Action Increase the SIZE parameter to the specified value 35 9 Messages and Return Codes Directory QL67 QL68 QL69 QL70 QL71 QL72 QL74 35 10 IFN IFN IFN IFN IFN IFN IFN ifn LINK MAIN TO MAIN HAS BEEN DELETED Meaning This is a warning message A link DMM which is internal to the access method has been deleted after alias and main updating Result The DMM is deleted ifn ALIAS ES WITHOUT MAIN DELETED Meaning This is a warning message Some aliases without a main entry have been found and deleted Result The file is in a coherent state ifn ALIAS ENTRY HAS BEEN INSERTED IN A CHAIN Meaning Due to a function on an alias having terminated abnormally this alias is not linked to its main Resul
212. GCOS 7 telecommunications sessions They are documented in GCOS 7 Network Operations Reference Manual CA CD FE FR NA NG QC TF TP System Component Name Communications Access Method Communication Control Communication Directory Handler Front End Controller Management Front End Processor Subsystem Network Administration Network Generation Communication Queue Control Transport and Front End Subsystems Transport and Network Subsystems 47 A2 10UJ 3 BN Messages General Environment BN messages are produced by the Binder Utility Pertinent Manuals Binder User s Guide cccccccccccccccccccscsscccccccesssssssscescceceesessssseceeseesesnsaeecesens 47 A2 11UP Message Descriptions Binderl THE BINDER IS NOT AVAILABLE ON YOUR SITE PLEASE CONTACT SUPPLIER Meaning You do not have Binder on your site Action Contact your supplier Binder2 ABNORMAL RETURN CODE FROM SYSOUT RC edited return code Meaning Binder failed to open the report file This message is uncommon when the standard SYSOUT file is used When a permanent SYSOUT file is used the most common return codes sent are EFNUNKN external file name unknown or IOFAIL I O failure on a damaged volume Result The bind is not performed Action Correct the JCL or contact the Service Center Binder3 WRONG TYPE OF SYSOUT Meaning The file specified in a PRTFILE or a PRTLIB parameter is not the SL type Result The bind is not performed
213. GFILE Action Report the problem to Technical Support UNABLE TO RETRIEVE INPUT FILE IDENTIFICATION Action Report the problem to Technical Support UNABLE TO OPEN INPUT FILE Action Check file labels characteristics assignment If they are correct the problem must be reported to Technical Support UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO RETRIEVE GETCI CHECKCI ADDRESS FOR INPUT FILE Action Check file labels characteristics assignment UFAS involved If they are correct report the problem to Technical Support INVALID INPUT FILE PARAMETER FILEFORM OR RECFORM Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO PUT RECORD BLOCK ON OUTPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO CLOSE OUTPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support OUTPUT FILE OVERFLOW Meaning Either the output file is actually too small or some incorrect parameter e g output record or block size implies an abnormal output file occupancy e g one record per block UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are corre
214. HAS NO SLAVE AND CALLS ONE Meaning Internal error INTERNAL ERROR ON POP TURBOCONFIG Meaning Internal error INTERNAL ERROR TURBOCONFIG NAV Meaning Internal error SEMAPHORE CREATION RC Return code Meaning Internal error 12 7 Messages and Return Codes Directory DU94 DU94 12 6 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 12 7 DU95 DU95 DU95 12 8 DYNSAVE EXCEPTION IN MODULE H_DFSRD_PLUG Action Indicate the module where the exception has arisen UNSTABLE STATE PLEASE RETRY ASKING STATISTICS LATER Meaning When DDYNSVR is sent the server is not able to answer TERMINATE running or other such event Module H_Dfsrd_PLUG COMMUNICATION ERROR BETWEEN DYNSAVE AND SERVER SERVER TERMINATION RUNNING COMMUNICATION ERROR NO MORE COMMUNICATION BETWEEN DYNSAVE AND SERVER SERVER TERMINATION RUNNING NO MORE COMMUNICATION ABNORMAL H_DDASG ON WORKFILE SAVE CALLS ENDSAV WITH NULL COMM_ZONE PTR INTERNAL ERROR START OF DYNAMIC SAVE SERVER REQUESTED READY TO START AGAIN DYNAMIC SAVE SERVER WARNING SOME FILE REMAIN UNDER DYNAMIC SAVE ABNORMAL RC ON H_SMPLDL Module H_Dfsrd_Slave ABNORMAL RC CREATE TRACE BUFFER Return code Meaning Internal error DFASG OPEN OF WORKFILE NOT DONE Return code Action Verify the WORKFILE definition and assignment May be an internal error UNABLE TO RETRIEVE FDBC PTR Return code Meaning Internal error
215. IB parameter given in the Modify TDS SMLIB command Issue a Display TDS SMLIB command to check the name of the SMLIBs If preceded by XUFAS 19 there is an invalid KEEP option in a multi ifn context If preceded by XUFAS 91 an internal error has occurred Contact the Service Center Channel in enqueued or active status The function H_EXCEP has been in a loop for Mask Set 20 seconds The channel program of Set Operating Mode Function Mask cannot be connected IOERR 1E00 1E4F IO in an erroneous state due to a firm hard recognized error 47 A2 10UJ 52 35 Messages and Return Codes Directory IOFAIL 52 36 0481 Software IO failure COBOL Status Key value 30 Any Disk File Any Except OPEN Irrecoverable I O Error Recovery of Volume Organization Table of Contents VTOC may be required Catalog Management Any Function DMU VOLCONTS VOLSAVE VOLREST VOLDUPLI Error Logging IOF Journalization OMH Main Console Management Physical I O Access Various Internal Operations RWI Irrecoverable I O error in catalog Check volume and device state using CATCHECK utility In processing VTOC of a MS M400 disk volume length of data read not as expected Output during the initialization of the log file after the abnormal termination of access to this file Verify the state of the log file concerned SYS ERLOG SYS ERLOGC or SYS ERLOGEF and the media A problem has been detected under FORMS during a
216. IBRARY lt library_name gt Meaning There are two or more empty SM libraries referenced by the load module that are empty Action Modify JOBLIB DY02 ERROR DETECTED CONFLICTING SM ENTRY SEGMENT STE Meaning Two referenced SMs are linked with the same ESSTE parameter value Action Modify the ESSTE parameter and link one of the SMs again DY02 ERROR DETECTED SM ENTRY SEGMENT LARGER THAN START ASSIGN Meaning The STARTASG parameter value of the linked LM is less than the STE value of an entry segment Action Modify the STARTASG parameter 47 A2 10UJ 15 1 Messages and Return Codes Directory DY02 DY02 DY02 DY03 15 2 ERROR DETECTED SM SYSTEM ENTRY SEGMENT STE LARGER THAN START ASSIGN Meaning The STARTASG parameter value of the linked LM is less than the STE value of an implicit SM SYS SYSTEM Action Modify the STARTASG parameter ERROR DETECTED CONFLICTING SM STE E Meaning Two referenced SM s are linked with the STN parameter value equal to E Action Modify the STN value of one of the SM s ERROR DETECTED SM SYSTEM lt SM_name gt NOT REFERENCABLE BY LM Meaning The specified SM is an implicit SM not on the system Action Reinstall the system SHARED MODULE lt SM_name gt lt library_ name gt Meaning The name of the SM referenced by the LM Action None 47 A2 10UJ 16 EX Messages General Environment EX messages are produced w
217. ID is returned instead of BUSY but no enqueuing is possible DVMGT 20 DAMAGED System error at deallocation time Damaged system tables DVMGT 20 DVCERR System error at deallocation time Incorrect parameters DVMGT 20 EMPTY Normal return code when a media has been deallocated The media was allocated and has now been deallocated DVMGT 21 BUSY The reservation of a volume has not been performed and for static reservation only the job that requested it has been enqueued The volume is already reserved by another user DVMGT 21 DVNAV The reservation of a volume has been rejected because of a user error Incorrect device type or device attributes Incomplete device attributes for a cartridge on multi model sites model name is missing DVMGT 21 WRONGDV System error while reserving a volume or cancelling the reservation Value out of range or unused due to MIRROR disk pairing DVMGT 23 DVCERR Device class device attribute not compatible with the requested device in the NAME VOLUME command DVMGT 23 WRONGPAR System error Wrong MV command requested by AVAIL DVMGT 25 DVIDFBID Cancellation of reservation of a pool of devices is not performed because no device exists with the specified attributes within the pool 47 A2 10UJ 56 5 Messages and Return Codes Directory 56 6 DVMGT 25 DVNAV DVMGT 26 DAMAGED DVMGT 26 DVIDFBID DVMGT 26 DVOV DVMGT 27 DAMAGED DVMGT 27 DVCERR DVMGT 27 DVNAV
218. ILE Meaning Sort is unable to know which volume supports the workfile H_RTVLID The return code from H_RTVLID is given INVALID RUN TIME SCB Meaning The SCB table in the run time module does not begin with the characters SCB1 Check for the link Action Correct the user program 42 3 Messages and Return Codes Directory TDO1 13 TDO1 14 TDO1 15 TDO1 16 TD01 17 TD01 18 TD01 19 TD01 20 TD01 21 42 4 INVALID RUN TIME SCR Meaning The SCR table in the run time module does not begin with the characters CURR Action Check for the link Correct the user program UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The common Sort segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The generated code segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF INVALID SORT CALL NESTING Meaning Several nested Sorts have tried to use the same run time static resources Action Correct the user program UNABLE TO RETRIEVE SORT RUN TIME RESOURCES Me
219. ILE IN CHKPT n RESTART ABORTED CHECKPOINT ABORTED NEXT CHKPTS INHIBITED Meaning System error The message text indicates www w e the operation being performed either a checkpoint or restart e the result of the error e the origin of the error explained in the checkpoint code and the return code 6 2 47 A2 10UJ CK Messages Action Contact the Service Center CK03 xx checkpoint code RC edited return code RESTARTING FROM CHKPT n STEP ABORTED WHILE IN CHKPT n RESTART ABORTED CHECKPOINT ABORTED NEXT CHKPTS INHIBITED Meaning System error The message text indicates www w e the operation being performed either a checkpoint or restart e the result of the error e the origin of the error explained in the checkpoint code and the return code Action Contact the Service Center CK04 xx checkpoint code RC edited return code RESTARTING FROM CHKPT n STEP ABORTED WHILE IN CHKPT n RESTART ABORTED CHECKPOINT ABORTED Meaning System error The message text indicates e the operation being performed either a checkpoint or restart e the result of the error e the origin of the error explained in the checkpoint code and the return code Action Contact the Service Center CK0O5 xx checkpoint code RC edited return code RESTARTING FROM CHKPT n STEP ABORTED WHILE IN CHKPT n RESTART ABORTED CHECKPOINT ABORTED Meaning System error The message
220. INPUT but the access mode for the assign is READ ALLREAD or EXECUTE There is an inconsistency between the sharing mode and the processing mode When only read operations are allowed the processing mode must be either INPUT or UPDATE The processing mode is input but CATNOW has been requested The check on the processing mode requested in the assign has failed The requested volume sequence number is greater than 10 The write ring checking for a tape file has failed Set in the following cases An attempt has been made to add an eleventh work media During deallocation with the UNCATNOW parameter specified the end of the media list has been reached A disk file has been found in an unstable state The volume has been opened successfully with a dummy ifn The specified file has not been found on the volume 47 A2 10UJ DFPRE 21 FUNCNAV DFPRE 21 IFNERR DFPRE 21 MDERR DFPRE 21 MDNAV DFPRE 21 NOTCLOSV DFPRE 21 NOTOPEN DFPRE 22 CONFLICT DFPRE 22 DUMMY DFPRE 22 FUNCNAV DFPRE 22 IFNERR DFPRE 22 NOTOPEN 47 A2 10UJ File Management Return Codes in More Detail Set in the following cases The specified function is not allowed when ACCESS DEVICE The specified function is not allowed for devices other than disk diskette or tape MD has been specified for an assign but CATNOW has not been specified Work media cannot be added to an uncataloged file An invalid ifn ha
221. ION Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master H_SWAPxx FILE NOT INITIALIZED Meaning Depends on the return code displayed at the console Does not prevent a TDS application from executing if there is more than one swap file The return code TP7 13 FLNAV means that the location of lt tdsname gt RECOV or lt tdsname gt SWAP has changed since the last session The location of a swap or recovery file may have changed due to the DELETE _FILE BUILD_FILE commands or the SAVE_DISK RESTORE DISK commands with the REORG option Action Run the TP7GEN utility Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master ERROR DETECTED WHILE ACCESSING TDS SWAP FILE Meaning This message can concern the lt tdsname gt RECOV file or the lt tdsname gt SWAP file Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master IO FAILURE ON SWAP FILE C CODE xxxxxxx SEARCH ADDRESS CCCC TT RR Meaning This message can concern the lt tdsname gt RECOV file or the lt tdsname gt SWAP file C CODE is the I O completion code CCC TT RR is the decimal address of the last searched cylinder track record Action See PRLOG for causes Type of message Fatal Dump taken Yes 47 A2 10UJ MU and MV Messages Recipient of the messa
222. ION ABORTED SEV 7 RC Return Code Meaning The step initialization has been killed or aborted Result The reason is given by the return code 47 A2 10UJ JB60 JB61 JB65 0201 47 A2 10UJ JB Messages UNABLE TO DEFINE SYSOUT FOR DUMP DEBUG RC edited return code Meaning System error The report for DUMP or Program Checkout facility cannot be defined Result The DEBUG or DUMP option is deleted Action Contact the Service Center WARNING ACCESS RIGHTS ON LM DUMP AND DEBUG DENIED Meaning This message is issued at process group initialization when the user has only the execution right on the Load Module The DUMP option requires the read right and the DEBUG option requires both the read and write rights Result The DUMP and DEBUG options are deleted Meaning This message does not appear on the JOR but the message key appears in the reason field of the access right violation records in the accounting file An explanation of the reason field is given in the section on I O completion codes in this manual In this case the reason field means that the user attempted to execute a pre initialized load module without having the EXECUTE right on that module 23 5 Messages and Return Codes Directory 23 6 47 A2 10UJ 24 JP Messages General Environment The After Journal sends JP messages JP messages occur either during execution of a user s
223. Key Value 9M Any Operation Any Operation ifn already assigned Correct program e g deassign with CLOSE and reassign with OPEN or JCL Generally inconsistency between the ifn declaration in the COBOL SELECT clause and the ifn specified in the JCL ASSIGN statement Correct program and or JCL 47 A2 10UJ COBOL RTP ASSIGN Statement FORMS Journalization PASCAL RTP File Access TDS OPEN IFNSTRU 1505 Any File Assignment Organization IFNVIOL 1504 Physical I O Access Various Internal Operations TDS 47 A2 10UJ DATANAYV to IOFAIL Return Codes The file given as a reference in the FILE clause is neither assigned nor does it have a file literal in the SELECT clause A UFAS file or a library file is not assigned Check that the file has been assigned Batch IOF 1 The device LDN containing the journal could not be found 2 The file to roll back has not been assigned Send the PRLOG log to the Service Center An attempt has been made to access a file which has not been assigned Assign the file in GCL or JCL or connect the file using FCONNECT Attempt to deassign a file that is already deassigned Check the IFN or the state of the file No ASSIGN statement for the internal file named use the OPEN command to assign it dynamically IFN string already used Attempt to assign a file declaration to an ifn which is currently being used Either there is a processor error or the GPL file
224. LE TO SEND MESSAGE TO MASTER Action None internal error Type of message Fatal Dump taken No A TDS TASK HAS NOT BEEN INITIATED Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master CANNOT ENTER IN MONOSIMULTANEITY PROCESSING Action None internal error 47 A2 10UJ MU and MV Messages Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU06 ERROR WHILE RETRIEVING RECORD FROM TDS SYSTEM FILE Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU07 ERROR WHILE PUTTING RECORD TO TDS SYSTEM FILE Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU08 ERROR WHILE ACCESSING RECORD IN TDS SYSTEM FILE Action None internal error Type of message Warning Dump taken No Recipient of the message Main Operator MU09 UNEXPECTED AFTER IMAGE FROM AFTER JOURNAL PRINT SYS JADIR Meaning Error during dynamic rollforward Action Print the SYS JADIR directory Type of message Warning Dump taken No MU10 NO LINK TO USER JOURNAL UCA Meaning If the return code is USERUNKN ensure that the TDS was not started by a user under the OPERATOR project with the Station attribute whose value is a site name not MAIN For more information see the paragraph 5 3 Starting a TDS Session In other
225. LLTER STNOINIT STTNUNKN 47 A2 10UJ Any File Organization File Management 1A1E 1A1F Mathematical Package 1c00 1DFF OMH 0081 OMH 0082 0083 1c21 1028 Catalog Management RBF RESNAV to YETALLOC Return Codes Any I O Operation Abnormal STANDBY state detected on device in use non software recoverable File Storage and Disk has stopped Put into the READY state Tape Handling ARG too near to N PI 2 ARG gt 10 8 loss of precision The tangent function argument gt 10 8 loss of precision Entity in an erroneous state due to a programming sequence error Command An incorrect station name has been specified Management Message s still pending Command Dynamic command cleaning has taken place at Management process group termination H_SCDCT Dynamic commands for the specified job are in the DCT Dynamic Command Table Message Other pending messages for the process group Management are being output Process group s still pending Terminals still pending Station not initialized Station unknown not found in catalog The specified station name is not known in the catalog Station Station unknown in the station table Station is Management unknown either through a a CHAR 8 or a BIT 8 54 17 Messages and Return Codes Directory STUNTEST 1E25 STWOOV 1A0B STWOUN 1A0A SUBFROUT 0803 Queued Files SUMOVERR 122F SWAPPED 1C1E IRM System Nucleus SYNCERR 1835 RWI
226. LOCK NUMBER lt blk_number gt COMPLETION CODE lt XXXX gt Meaning During the processing of the file an I O error occurred on the directory or bam block number lt blk_number gt Result The current action is stopped and the file is left unstable Action None if the message is sent during normal processing of the file because salvaging will begin at the next OPEN If this message is sent during salvaging recovery is aborted Refer to the following messages for the action to take UNEXPECTED DIRECTORY STRUCTURE IN BLOCK NUMBER lt blk_number gt Meaning An incorrect directory block structure was detected Result The block is truncated at the last valid entry Action Check the directory contents ALL ENTRIES CANCELLED IN DIRECTORY BLOCK NUMBER lt b1k_number gt Meaning A directory block does not have a directory structure it has been changed to zero Result All entries are cancelled in that block Action Check the directory contents UNABLE TO WRITE A BLOCK OF BAM END OF SALVAGING Meaning An J O error occurred while writing to a block of the Block Allocation Map Result File Salvaging aborts The file is left unstable and cannot be accessed Action Restore the file from a previous save UNEXPECTED BAM BLOCK STRUCTURE FILCHECK SUBMITTED Meaning The given Block Allocation Map block is in an inconsistent state the number of formatted LTs is not equal to the number of free and used LTs Result The Block Alloca
227. MAXIMUM INCLUDE NESTING DEPTH EXCEEDED IGNORED EMPTY INCLUDE FILE IGNORED 28 16 47 A2 10UJ MAC Messages 27 A LINE MAY BE LOST 28 unused 29 INCLUDE TEXT NOT FOUND IN ASSIGNED LIBRARIES IGNORED 30 INCLUDE LIBRARY SPECIFIED UNKNOWN IGNORED 31 INCLUDE TEXT NOT FOUND IN SPECIFIED LIBRARY IGNORED 32 INCLUDE LIBRARY NOT ASSIGNED TEXT NOT INCLUDED 47 A2 10UJ 28 17 Messages and Return Codes Directory 28 18 47 A2 10UJ 29 MU and MV Messages General Environment MU and MV messages are produced by the TDS processor The messages appear in the JOR of the TDS job Pertinent manuals LDS CONCEDIS recreire a a Ps SES 47 A2 26UT TDS Quick Reference HAndbOOK ccccccccccccecscecsceesceeteeeeeeeeeecaeeseesseesaes 47 A2 04UT TDS Administrator s Guide ccccccccccccccccsceeseetseenet eee c eee eeesessesnseeeseenaes 47 A2 32UT TDS COBOL Programmer s Guide ccccccccccccccccccseceseceecneteteceecseeesessaes 47 A2 33UT IOS TDS User s Guide LOS V3 cccccccccccccecceccseccsetctetssecnseesseenseenseeneenas 47 A2 81UD IOS V4 TDS User s Guide LOS VA4 occccccccccccccccccecsseetseeteectsecesneseeenaeens 47 A2 81UR Message Descriptions This section lists TDS error messages in numerical order All error messages are reported in the JOR and some appear on the screen Error messages printed in the JOR have one of two forms WARNING hhmmss MUxx message text FATAL hhmm
228. MMSUB and the OWNER lt Rxxxx gt UNABLE TO START UNKNOWN REPORT Always followed by a TW09 message Meaning The subfile is unknown Who receives the message The SUBUSER 47 A2 10UJ TW Messages TW08 lt RXXXX gt UNABLE TO OPENS UNKNOWN ENVIRONMENT Always followed by a TW11 message Meaning The environment subfile is unknown Who receives the message The SUBUSER TW08 UNABLE TO OPENS UNKNOWN ENVIRONMENT Sent in case of PTEST processing Meaning The environment subfile is unknown Who receives the message The TWCOMMSUB and the OWNER TW08 lt Rxxxx gt UNABLE TO START REPORT BUSY Always followed by a TW11 message Meaning The subfile is busy Who receives the message The SUBUSER Twos lt Rxxxx gt UNABLE TO OPEN lt retcode gt Always followed by a TW09 message Meaning The subfile cannot be opened Who receives the message The SUBUSER and possibly the TWCOMMSUB depending on the return code Twos lt Rxxxx gt UNABLE TO OPENS_ENV lt retcode gt Always followed by a TW11 message Meaning The environment subfile cannot be opened Who receives the message The SUBUSER and possibly the TWCOMMSUB depending on the return code TWO8 UNABLE TO OPENS_ENV lt retcode gt Sent in case of PTEST processing Meaning The environment cannot be opened Who receives the message The TWCOMMSUB and the OWNER 47 A2 10UJ 46 7 Messages and Return Codes Directory Twos Tw
229. Meaning A return code from H_SGLOCK is given Action Either SIZE is smaller than the locked memory needed or the problem must be reported to Technical Support UNABLE TO OPEN PRTFILE Action correct the JCL or report the problem to Technical Support UNABLE TO CREATE PRTFILE BANNER Action Correct the PRTFILE or report the problem to Technical Support UNABLE TO CREATE RECORD 118 ON PRTFILE Action Correct the PRTFILE or report the problem to Technical Support UNABLE TO PUT RECORD ON PRTFILE Action Correct the PRTFILE or report the problem to Technical Support INCONSISTENT DATA DATA LOSS Meaning When the ENDSRT procedure was called the number of returned entities was lower than the number of released entities INCONSISTENT DATA DATA GAIN Meaning When the ENDSRT procedure was called the number of returned entities was greater than the number of released entities UNABLE TO OPEN LOGFILE Action Correct the LOGFILE JCL parameter or report the problem to Technical Support 42 25 Messages and Return Codes Directory TD14 08 TD14 09 TD14 10 TD14 11 TD14 12 TD14 13 TD14 14 TD14 15 TD14 16 TD18 01 TD18 02 42 26 LOGFILE OVERFLOW Meaning The LOGFILE assignment is not correct or the DSL implies that many invalid records have been put in the LOGFILE UNABLE TO PUT RECORD ON LOGFILE Action Check file labels characteristics assignment If they are correct report the
230. Messages 46 TW Messages 46 1 General Environment cccccecececeeeeeeeeeceaeeeeaeeeesaeeeesaeeseaeeeeaaeeseaeeesaeeseaeeeseaeesssaeeneaes 46 1 46 2 Messages eeeeeescceecssnnceeeeeeeceeeeneeceeeeseeeeeeesaeeeeeesaeseeecaaaaeensaaaeessnaaeensnseaeensnnaneentnes 46 3 47 TX Messages 48 System and File Violation Messages 48 1 Object Cod S Q0 iiia a e ae aa elie Ea ERINE ATRE 48 2 48 2 Violation Classes CC cccccccceceseeeseeeeeeeeeeeaeeeeeeeeaeeeceaeeesaeeseaeeseaaeeseaeeeseaeeseaeesseeseaes 48 3 48 2 1 Violation Classes 01 to 07 Violation of Access to Cataloged Objects 48 3 48 2 2 Violation Classes 11 to 13 Violation of Access to the System ce 48 3 48 2 3 Violation Classes 21 to 23 Attempt to Use a Protected Service 4 48 3 49 Trace Messages for IDS II under TDS 47 A2 10UJ ix Messages and Return Codes Directory 50 Interpreting Return Codes 50 1 Understanding The Return Code Format 50 2 Understanding Messages With Return Codes 50 3 Handling Errors 50 4 Organization Of The Return Code Explanations 50 5 Using The Return Code Explanations 51 ABNCCAD to DATALOSS Return Codes 52 DATANAV to IOFAIL Return Codes 53 IONOP to RESIDENT Return Codes 54 RESNAV to YETALLOC Return Codes 55 Return Codes Listed in Numerical Order 56 Device Management Return Codes in More Detail 57 File Management Return Codes in More Detail 57 1 File Assignment 57 2 File Description Pr
231. Messages System trace collector is notified with an unknown RI message Incorrect release of trace event mode init segment One collector task has abnormally terminated System trace collector is notified with an incorrect RI message Incorrect state for a system trace collector task semaphore The defined collecting task is declared deadlocked Current buffer attributes wait trace event mode and trace dump attributes are disabled temporarily if for the first time Incorrect access to system trace resident structures System trace resident structures access error System trace resident structures access error Collector task abnormal initiation tskunkn h_waitsk RC Collector task abnormal state detection NOINIT MSGERR h waitsk RC SICID 4011 Procedure Message TBL NE Error number 4011 nn Return code CHECK SICID 4012 Messages Incorrect collector task initialization Incorrect initialization message from a collector task Abnormal collector task state is detected during termination phase Meaning Action System trace collector exit routine execution for an active process The nn value describes the task status when the exit routine is called TR20 messages numbers issued by the 4012 sicid procedure are defined as a function of the system trace circular file descriptor ordinal number in the collector initialization subfile Thus each message identifier is presented with the two corresponding num
232. N Meaning When accessing a file at physical level read or write a physical block on each call the only applicable processing modes on disk are INPUT OUTPUT UPDATE I O in COBOL is not allowed This problem normally arises only during the use of a system component and indicates a system error Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn ILLEGAL ACCLEVEL PHYSICAL FOR COMPACTED FILES Meaning For compacted files access is allowed only at record level This error is normally possible only in a system component and indicates a system error Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn ONE BLOCK SKIPPED AFTER I O ERROR ON DISK Meaning Warning message indicating that an error occurred during an I O operation read on a disk file As the ERROR SKIP option was specified the erroneous block was skipped Result Execution proceeds on the next block ifn I O ERROR CODE nnnn RC edited return code Meaning An I O error has been detected The I O completion code nnnn gives a detailed status of the error refer to the section on I O completion codes in this manual Result Execution may proceed depending on the user specified option for I O error processing ERROPT SKIP available in input mode only 47 A2 10UJ
233. N VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Remote application is not known on remote site Action Refer to the VCAM error codes CONNECTION REJECTED MAILBOX NOT OPERABLE VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Destination mailbox not operable Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED MAILBOX SATURATED VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Number of users connectable to destination mailbox is saturated Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED APPL REJECT Meaning Destination request cannot be enqueued Action Check the status of the remote network system CONNECTION REJECTED STATUS DLGREJCT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Dialog rejection negotiation result Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED STATUS PCREJCT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Presentation rejection negotiation result Action Check the status of the remote network system Refer to the VCAM error codes CONNECTION REJECTED STATUS TMOUT VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Expiration time out Action Check the status of the front
234. N CLOSE Return code Meaning Internal error DU93 ABNORMAL RWI OUTPUT SESSION CLOSE Return code Meaning Internal error ABNORMAL RWI OUTPUT FORMAT SESSION CLOSE Return code Meaning Internal error EXCEPTION IN MODULE H_DFSRD_IRWI Action Indicate the module where the exception has arisen EXCEPTION IN DYNSAVE SERVER Module H_Dfsrd_Plug TERMINATE SERVER STARTED Meaning Normal under TDYNSVR command or after an abort of the server TERMINATE SERVER ASKED AND SERVER NOT ACTIVE Meaning Normal under TDYNSVR command or after an abort of the server TERMINATE SERVER ASKED AND SAVE RUNNING Meaning Normal under TDYNSVR command or after an abort of the server USE TERMINATE FORCE OR WAIT FOR SAVE END Meaning Self explanatory See TDYNSVR command definition 47 A2 10UJ DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 47 A2 10UJ DU Messages UNKNOWN COMMAND OPTION FIRST LETTERS wrong option Action Use the right option See TDYNSVR DDYNSVR definition INTERNAL ERROR WRONG LAST FILE TO DSBAP Meaning Internal error INTERNAL ERROR TOO LARGE LAST FILE NB TO DSBAP Meaning Internal error INTERNAL ERROR TOO SMALL FIRST FILE NB TO DSBAP Meaning Internal error DU94 FCB_C PTR NOT NULL IN DCWAIT INTERNAL ERROR Meaning Internal error FCB_C PTR NULL IN DCWAIT MAY BE INTERNAL ERROR Meaning May be internal error END OF FILE
235. NAME IN PATH DOES NOT EXIST Meaning An object searched for in the catalog s was not found e g when cataloging a file this message is displayed if the directory under which the file is to be cataloged does not exist Action Check that e the object name is correct e the correct catalog s have been searched e the object type is correct DCT53 object name FILE GENERATION UNKNOWN IN CATALOG Meaning A file generation has been specified as a parameter of the utility but the generation number does not exist in the catalog This is because e the generation number is obsolete e the generation number is not yet created and does not correspond to the next generation to be created Result The utility is not performed Action Use CATLIST to check the catalog contents DcT54 object name REFERENCED CATALOG CANNOT BE ACCESSED Meaning A catalog has been referenced with the CATALOG 1i parameter in the JCL of the utility but the value i does not lead to a valid catalog e either there is no CATALOGi parameter in the active ATTACH statement e or the CATALOGi parameter in the active ATTACH statement specifies a DUMMY catalog Result The utility is not performed Action Check the active ATTACH statement DCT55 object name AN OBJECT WITH THE SAME NAME ALREADY EXISTS IN THE SAME CLASS Meaning The creation of a catalog object directory file file link generation group has been requested but an object already exist
236. NBERR 4006 13 18 CHECK 4006 19 24 CHECK 4006 25 30 CHECK 4006 3 1 36 ARGERR 4006 37 42 CHECK 4006 43 48 ARGERR 4006 49 54 ARGERR 4006 55 60 ARGERR 4006 61 66 ARGERR 4006 67 72 ARGERR Meaning Action The collector task is notified with a message not related to current system trace collector occurrence The collector task is notified with an incorrect target field message Discrepancy between in procedure constants and values in system trace resident tables detected during task initialization Incorrect collector task internal state descriptor detected during initialization phase During collector task initialization phase the collector task internal descriptor values are out of bounds During collector task initialization phase invalid access path to collector task related buffer descriptor in system trace resident structures During collector task initialization phase incorrect buffer descriptor detection During collector task initialization phase incorrect access path to collector task related trace event buffer descriptor During collector task initialization phase incorrect access path to collector task related trace dump buffer descriptor During collector task initialization phase incorrect access path to collector task related trace event control buffer During collector task initialization phase incorrect access path to collector task related trace event buffer During collector task initialization phase
237. NDARY and restart the job only if the volume is not SHARED if it is SHARED contact the Service Center DV42 THE VOLUME volnm OF DEVCLASS dvc IS NOT ON DEVICE dev id Meaning The JCL usually the ASSIGN statement refers to a non removable disk by both its volume name and its assign name and they do not match Result The step cannot be started Action Check and correct the JCL DV43 THE NON STANDARD VOLUME volnm OF DEVCLASS dvc IS NOT ON DEVICE dev id Meaning The JCL usually the ASSIGN statement refers to a non standard non removable disk and specifies a device name on which it cannot be found Result The step cannot be started Action Check and correct the JCL DV44 INCORRECT LDN ldn Meaning Illegal allocation of a volume by a job Result The step cannot be started due to a system error Action Save the SYS LOGC and SYS SWLOG files domain DVMGT and contact the Service Center DV45 THE SECONDARY COPY OF MIRROR VOLUME volnm OF DEVCLASS dvc IS MISSING Meaning During dynamic volume allocation the secondary disk of the mirrored pair volnm is unknown never recognized Result The allocation is rejected with RC DVIDFBID Action Set your secondary disk to IN READY and restart the job or issue UNPMIR KEEP PRIMARY and restart the job 47 A2 10UJ 14 9 Messages and Return Codes Directory DV46 ANY MEDIA OPTION IS NOT ALLOWED FOR T amp D Meaning The Test and Diagnostics re
238. NFORMATION Q In this example XX 11 procedure Y Y 18 followed by a return code RC and ending with secondary information COMPLETION CODE DEVICE ADDRESS Pertinent Manuals COBOL S85 User s G ideruereis oidor n a a a a R 47 A2 06UL Full IDS IT User s GU eaa a o a A e aA 47 A2 07UD GPLUS S GMAC asenet oe aa ae a e aai 47 A2 36UL TD SAT EENAA RET EE E EEEE E A E 47 A2 12UD SORT MERGE User s Guide acsirnronir ennn RAIN 47 A2 08UF DSORT INVALID MESSAGE XX YYYY Meaning XX module number hexa digits 2 YYY error number hexa digits 4 An error occurred that caused the module number or the error number to be incorrect Action Report the problem to Technical Support INVALID SCA Meaning SCA version is neither 0 standard value nor 1 BMICK REL RET See SH_DCSCA Action Correct the user program INVALID SRTDEF Meaning The SRTDEF is not correct Details are given by the messages TD01 65 to TD01 81 messages Action Correct the user program INVALID SRTDEF Meaning The option string see JCL statement STEP cannot be interpreted Action Correct the JCL KEY NUMBER MUST BE 1 TO 64 Meaning The number of key fields is greater than 64 Action Correct the user program 47 A2 10UJ TDO1 05 TDO1 06 TDO1 07 TDO1 08 TDO1 09 TDO1 10 TDO1 11 TDO1 12 47 A2 10UJ TD Messages INVALID KEY TABLE Meaning The key definition table pointed to by SRTDEF is wrong Det
239. NIT file OOAA Too late to specify previously valid action RBF Station Station exists and can be used but has been Management deleted via CATMAINT SBR Analyzer The SBR file is in 1E 0 format which is no longer supported VCAM ISO The event notified by an application cannot be delivered because of an error in decoding an SPDU for instance Use the VCAM trace to analyze the problem 1E07 Device off line 1014 Oldest generation unknown TDS Master Command The M LSTC M LSCPOOL COR xxx or M CTC Master Commands were sent Netgen was incrementally generated while TDS was processing the command Try the command later retype the command 1805 Operation code error SBR Illegal probe setting Contact the Service Center System Nucleus Dynamic The instruction is not ENTER or EXIT The Addresser segment is not available Modify the user code VMM A process cannot be restarted after an ISTK exception Contact the Service Center 47 A2 10UJ OPEN 1c07 Any File Organization TDS COBOL RTP IDS II OMH TDS OPENS 1c08 Library File OPERATOR 1730 TDS OPQOVLD 0504 OMH OPSCUNKN 1010 OPSTNAV OAOD Any File Organization File and Data Management 47 A2 10UJ IONOP to RESIDENT Return Codes File already opened COBOL Status Key value 97 OPEN OPEN Statement Access Compound Messages OPEN TPR Operation H_ SENDO SWI Commands File Management File Allocation File is alre
240. NORMAL RFLDEF Return code Meaning Internal error ABNORMAL DFLDEF Return code Meaning Internal error ABNORMAL DYNAL Meaning Abnormal RC on H_dynal dynamic allocate of the workfile Action Check workfile definition and allocation parameters DYNSAVE WORKFILE MAY NOT BE TEMPRY Meaning Your dynamic save WORKFILE is TEMPRY and must not be See the dynamic save WORKFILE definition ABNORMAL DFLASG Return code Meaning Internal error ABNORMAL H_RFLDEF NOLABEL Return code Meaning Internal error ABNORMAL RTVLID VOLSTAT Return code Meaning Internal error 47 A2 10UJ DU95 DU95 DU95 DU94 DU Messages ABNORMAL OPEN Return code Meaning Internal error NOT ENOUGH SPACE ON WORKFILE Meaning The WORKFILE is too short and may not be extended further no INCRSIZE or no disk space NUMBER OF WORKFILE BLOCK USED Meaning The first available block address on WORKFILE is block address RWI WRITE ERROR H_RWMWRITE RWI CHECK ERROR H_RWWAIT RWICHECK DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 47 A2 10UJ Meaning Internal errors ABNORMAL GIM INSERT XCBSAVE Return code Meaning Internal error ABNORMAL GIM INSERT XCBWAIT Return code Meaning Internal error WORKFILE CAN NOT BE EXTENDED Meaning The WORKFILE is too short and may not be extended further no INCRSIZE or no disk space NOT ENOUGH TYPE 3 4Mb SEGMENTS FOR BITMAPS Meaning Intern
241. NT STATE Meaning A previous IDS session terminated abnormally The FINISH function has not been performed for this file As the data base may be left in an inconsistent state further access to it is denied until the recovery procedures have been performed Result In a Batch environment the step execution is aborted Action Check the data base contents perform the necessary FILREST functions then restart the step alternatively the IGNORE TRANSIENT STATE run time option can also be used when the user is certain the files are in a consistent state 9 16 47 A2 10UJ 47 A2 10UJ DDM Messages DDM00432 lt error localization gt PROTECTION LEVEL OF FILE ASSIGNED TO ifn SCHEMA AREA area name INDEX index name IS INCONFLICT WITH THAT OF OTHER FILES ALREADY OPENED Meaning This message may appear if several files of the data base have been readied in UPDATE mode and only some of them are journalized This could lead to an inconsistent data base in the case of abort and rollback since only some files will be rolled back Result In a Batch environment the step execution is aborted Action Correct the JOURNAL parameters in the JCL or in the catalog DDM00433 lt error localization gt THE FILE ASSIGNED TO IEN ifn SCHEMA AREA area name INDEX index name IS NOT A DATA BASE FILE Meaning The execution of the READY statement leads to a file which is not a UFAS file with integrated organization Re
242. No more objects to be found End of file reached The file which has been opened contains a single block Contact the Service Center Not enough space for saving file currencies in the swap file buffer This lack of space may cause the DATALIM return code to be sent when unmapping is performed but no commitment point is performed on a commitment point if the CALL KEEP CURRENCIES procedure has been called for the files protected by the Before Journal sizing the swap file buffer is discussed in the TDS Administrator s Guide if the limit of the swap capacity is reached increase the swap size with the TP7PREP utility and generate TDS again End of data reached No record delivered Occasionally it may be to the user s advantage to re allocate a larger file 51 34 47 A2 10UJ ABNCCAD to DATALOSS Return Codes DATALOSS 0436 Data limit reached but initial amount of data not all input Buffer Management Resource Status File Management Save and Restore SORT MERGE loss of data The destination area to which data is to be moved from the buffer pool is too small Save file was incomplete so the restore cannot be performed Use another SAVE Some sorted records have been lost Re execute the SORT step with DEBUG or the CHECK keyword in the FUNCTION PARAGRAPH of DSL or with X 0 or X 02 value in the second byte of the SRTDEF_FILLER7 field for a subroutine sort call together with DUMP DAT
243. Nucleus 00E7 1023 1824 182F 1015 File Management SBR 1802 Physical I O Access 1404 BFAS Sequential Disk Files SBR UFAS and UFAS EXTENDED Disk Files All Organizations File Storage and Tape Handling VMM IONOP to RESIDENT Return Codes The number of record keys of the indexed file their position relative to the beginning of the record their length and or their permissible duplicate keys are not the same as those specified in the program Error in requested space size Attempt to delete a segment protected by a key The key provided is not the same as the segment key Record selected has next higher key value File Storage and Tape Handling Analyzer Key unknown record not found Value of label is incorrect Label unknown VTOC label invalid Try running VOLCHECK Syntax error in command Refer to the error message Error in logical channel program A logical Channel Program error resulting from an erroneous Channel Program header Check the parameters if a direct call to PIO was made If this does not correct the error the error is internal and you should contact the Service Center Level of access to a file not allowed OPEN Analyzer OPEN Illegal access level physical for a file with compacted records Illegal critical selection level detected during analysis Contact the Service Center The external call for an internal entry point and ACCLEVEL is not physical
244. O CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF 42 21 Messages and Return Codes Directory TDO8 05 TDO8 06 TDO8 07 TDO8 08 TDO8 09 TD10 01 TD10 02 TD10 03 TD10 04 TD10 05 TD10 06 42 22 INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support UNABLE TO LOCK B_SEGMENT Meaning Return code from H_ SGLOCK is given Action Either SIZE is smaller than the locked memory needed or the problem must be reported to Technical Support UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Meaning Report the problem to Technical Support UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE S
245. O8 LASTPR OUT OF RANGE Meaning The oldest message currently available in the SYS LOGC file is not the next in sequence to the last message printed at the last run of the PRLOGC utility Due to the circular organization of the SYS LOGC file some messages may have been overwritten before being printed Result The utility is not performed Action Either run the utility more frequently or increase the size of the SYS LOGC file CLO9 ABNORMAL PROC OF SYS LOGC RC edited return code Meaning An incident occurred when accessing the SYS LOGC file The reason for the incident is given by the return code If the incident was an I O error return code IOFAIL the volume supporting the file may be damaged Result The incident occurred when opening the SYS LOGC file The utility is not performed Action If the incident was an I O error check the volume and the device supporting the file cL10 OPTION NOT AVAILABLE NOW Meaning One of the options specified is not currently implemented Result The utility is not performed Action None CL11 CPU NOT FOUND Meaning The SYS LOGC file can contain console messages produced on several CPU s A specific CPU has been selected in the execution options REPORT parameter The message indicates that the SYS LOGC file does not contain any message from the CPU concerned Result The utility is not performed Action Check the CPU identify given in the options 47 A2 10UJ 7 3 Messages an
246. ON OR TDSGEN Meaning TDS cannot be run because the number of terminals has not been declared neither in the network generation nor in the NUMBER OF TERMINALS clause Action Declare the number of terminals for details refer to the TDS Administrator s Guide MV25 TDS INITIALIZATION FAILED RETRY LATER RC xxxxxxxx Meaning The TDS cannot be started because of missing resources If this message appears just after the message MU83 this means that the TDS cannot be started because a GAC reinit is in progress Action Retry later Refer to the GAC Extended User s Guide and see the listing in this manual for the return code indicated in the message MV26 UNABLE TO CONNECT MASTER TERMINAL STARTUP ON DUMMY SESSION Meaning In an HA environment at restart after takeover the startup transaction has been executed on a dummy session because the reconnection to the Master Terminal was unsuccessful Action Start a dummy session MV27 SWAP INCONSISTENCY DETECTED NEXT RESTART WILL BE COLD Meaning Fatal error detected on context processing at TDS warm restart Action None Next restart will be forced at COLD MV28 XXXXXXXX SCHEMA STRUCTURES FOUND UNAVAILABLE SINCE TDS GENERATION Meaning Initialization of IDS schema structure has failed this schema cannot be accessed in this TDS and other sessions e on first startup of TDS after TP7GEN the return code gives the reason e this warning message is sent at each startup of th
247. Operating System Bull DPS 7000 Messages and Return Codes Directory 47 A2 10UJ Rev11 Operating System Bull DPS 7000 Messages and Return Codes Directory Subject This manual describes the system messages and return codes as they appear in the Job Occurrence Report some of which are also displayed on the console Special Instructions Software Supported GCOS 7 V10 TS 9920 Software Hardware required Date February 2005 Bull S A CEDOC Atelier de reprographie 357 Avenue Patton BP 20845 49008 ANGERS Cedex 01 FRANCE 47 A2 10UJ Rev11 Copyright Bull S A 2002 2005 Bull acknowledges the rights of proprietors of trademarks mentioned herein Your suggestions and criticisms concerning the form contents and presentation of this manual are invited A form is provided at the end of this manual for this purpose No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical or otherwise without the prior written permission of the publisher Bull disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customer In no event is Bull liable to anyone for any indirect special or consequential damages The information and specifications in this document are subject to change without notice Consult your Bull Ma
248. PDATES MADE BY JOB user_ron tds name before journal file not accessible re return code Meaning This message is printed in the SYSOUT of the recovery step An incident has occurred while a Before Journal file of this TDS was being accessed RYO1 will then appear requesting operator intervention and RY36 will appear again if the file remains inaccessible Action Run the utility FILREST then ROLLFWD to reconstruct the file RECOVERY IS IMPOSSIBLE FOR UPDATES MADE BY JOB user_ron tds_name on file efn file_name rc return code Meaning This message is printed in the SYSOUT of the recovery step Since the file file_ name cannot be accessed it cannot be recovered for JOB user_ron using Rollback and or Rollforward RY01 will then appear requesting operator intervention and RY37 will appear again if the file remains inaccessible Action Run the utility FILREST then ROLLFWD to reconstruct the file rollforward is impossible for updates made by job user_ron tds_name on file efn file_name rc return code Meaning This message is printed in the SYSOUT of the Recovery Step An incident occurred when the file named in EFN was being accessed RYO1 will then appear requesting operator intervention and RY40 will appear again if the file remains inaccessible Action Run the utility FILREST then ROLLFWD to reconstruct the file 47 A2 10UJ RY Messages RY41 ROLLFORWARD IS IMPOSSIBLE AFTER JOURNAL FILE file_name
249. PENED TOWARD cornm Response to OCPOOL TX71 POOL poolnm CLOSED MODIFIED OPENED BY cornm Unsolicited message which appears on the remote correspondent following a command which acts on pools TX72 cmdnm COMMAND NOT PERFORMED FOR poolnm reason where reason is 1 NETGEN REASON netgen 2 PPC REASON ppc_rc ppcreason CC cplcode 3 TDS REASON tdsreason Response to 1 OCPOOL 2 MDCPOOL 3 CLCPOOL cplcode is an internal value giving an error number inside the H_PPC_COM_S procedure See the TDS Administrator s Guide TX73 cmdnm COMMAND NOT PERFORMED reason where reason is 1 NETGEN REASON netgen 2 PPC REASON ppc_rc ppcreason CC cplcode 3 TDS REASON tdsreason Response to 1 OCPOOL 2 MDCPOOL 47 10 47 A2 10UJ TX74 TX75 TX76 TX77 TX78 TX79 TX80 TX81 TX81 47 A2 10UJ TX Messages 3 CLCPOOL cplcode is an internal value giving an error number inside the H_PPC_COM_S procedure See the TDS Administrator s Guide cmdnm COMMAND NOT PERFORMED FOR cornm TDS REASON tdscode Response to MDCPOOL or CLCPOOL for XCP1 or DUMMY correspondents See the TDS Administrator s Guide cmdnm LIMIT IS REACHED ONLY sessnb CREATED DELETED Response to MDCPOOL or CLCPOOL for XCP1 or DUMMY correspondents TDS tds SUPERVISION ACTIVATED DEACTIVATED Response to SPRVT TDS tds SUPERVISION ABNORMALLY DEACTIVATED gr4 CANNOT BE ACTIVATED Response to
250. PRESS BEFORE JOURNAL while files are SHARED and integrity is set to HIGH or MEDIUM Processing mode violation Procedure exception within a program SYMBOLIC QUEUE within input CD is incorrect Result of a resource handling violation e g FREE SAVE COMMON function performed without calling TAKE COMMON Violation FOR INQUIRY transaction Violation when wrong RECEIVE used Secondary index of UFAS indexed file was not created Too many users in TRACE Print mode DIRSIZE parameter of lt tdsname gt DEBUG file is too small to accommodate all users 47 A2 10UJ 1441 1219 0029 1E05 0980 186B SNDVIOL TABOV TIMELIM UNRECIO USERREQ UBUGERR TDS Return Codes in More Detail Violation when using SEND The transaction tried to lock more pages than currently allocated The transaction will be automatically restarted with a higher number of locked pages allocated TPR time limit exceeded Irrecoverable I O error Abort requested by user IDS II user error see detailed explanation in JOR or TRACE When a TPR aborts with this code the message is printed in the JOR and in the TRACE file when the terminal is in TRACE 58 2 Tds Return Codes On M Open M Close 47 A2 10UJ Return Code Number 1501 0200 0460 0A17 1800 0A02 1208 1007 1223 1820 0A06 Return Code ARVIOL BUSY CONFLICT DATANAV DVCERR DVNAV DVOV EFNUNKN ENTRYOV EXTERR FLNAV Explanation
251. PRTLIB or PRTFILE parameter of the JCL due to a software problem Result The compiler proceeds but the current record is not stored in the report file Action Report the problem to the Service Center CHNAME CULIB FROM WORK member name 1 TO member name 2 RC edited return code Meaning The compiler has created a new version of a CU when an old version existed in the library in a member with a work name member name 1 After deleting the old member the compiler renames the work member with its actual name member name 2 An incident occurred during this operation the reason for which is given by the return code Result Compiling stops Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center 47 A2 10UJ PAS30 PAS31 PAS32 PAS33 PAS35 47 A2 10UJ PAS Messages VMMACC WORK RC edited return code Meaning There was a problem with the management of the virtual memory files used by the PASCAL compiler the return code gives the reason Such a message indicates a system error Result Compiling stops Action Contact the Service Center VMFOP WORK RC edited return code Meaning There was a problem with the management of the virtual memory files used by the compiler the return code gives the reason Such a message indicates a system error Result Compiling stops Action Contact the Service
252. PRTLIB parameter is not the type SL Result Compilation is aborted The CU is not produced no compilation listing is produced Action Specify an SL library in PRTLIB parameter CBLO1 ERROR WHILE COMPILING program name IMPOSSIBLE TO OPEN H_PR Meaning The file or library specified for storing the compilation listing cannot be opened A previous message FP17 containing the return code gives the reason for the error The return code EFNUNKN indicates that the file specified in either the PRTLIB or PRTFILE parameter does not exist on the specified volume Result Compilation is not performed Action Check the PRTLIB or PRTFILE parameter specified 4 2 47 A2 10UJ 47 A2 10UJ CBL Messages CBLO2 SUMMARY FOR program name lt error summary gt NO CU PRODUCED Meaning Information message displayed for each procedure compiled It indicates e The name of the compiled program e The summary of errors detected i e the number of errors for each severity level or the phrase NO ERRORS e Whether or not the CU was produced Action None CBLO4 NOT ENOUGH MEMORY TO RUN COMPILER Meaning The amount of memory requested in the SIZEOPT parameter is not enough to run the compiler Result The memory reserved for the compiler is increased to fit the compiler s needs CBLO5 extra size K EXTRA MEMORY USED FOR cpu time CPU MINUTES elapse time ELAPSED MINUTES Meaning The EXPSIZE parameter of a
253. PSTATERR 1C16 YETALLOC 1C17 YETASG 1C18 NOTCLOSV 1C19 NODELETE IC1A NOUPDATE 1C1B WRONGMD ICIC NOSWAP 1C1D STAGEER 1C1E SWAPPED 1C1EF WITHAR 47 A2 10UJ Return Codes Listed in Numerical Order ARG i overflow complex arctan ARG i overflow complex arctan ARG i overflow complex arctanh ARG i overflow complex arctanh ARG i overflow complex arctanh ARG gt underflow arctanh ARG f gt underflow arctanh ARG f gt underflow arctanh Not normalized argument when calling a mathematical function Rejection of a user Entity in an erroneous state due to a programming sequence error File not open Wrong file organization Subfile not open No current record Wrong processing mode No lock File already opened Subfile already opened Attempt to operate a non initiated object Not obsolete End of data already signalled Wrong device Invalid character File volume is not current Object has lower levels Object has relationship Object has synonym Attempt to create a wrong catalog structure One subfile is already opened in output mode so the output is no longer available Closing of user file has been forced Process state error File is already allocated File is already assigned IFN not in close volume state Record deletion not allowed Update not allowed Wrong reference mode VMM area cannot be swapped Processing state has not reached the expected stage Area s already swapped
254. Process Management RBF Services SORT MERGE SBR System Nucleus TDS UFAS and UFAS EXTENDED Unit Record Driver Diskette 1876 OMH RWI OPEN Step Initiation Terminal Management Station Management String Handling Collector Dynamic Addresser OPEN XCP2 ABNCCAD to DATALOSS Return Codes Certain file characteristics are inconsistent e g RECSIZE 0 CISIZE gt track size for a UFAS file processing mode implies writing but NVOLWR specified in ASSIGN The attribute conflicts with the form e g because the selected field starts in column 1 QASSIGN used in JCL when a process group is not linked with the LINKER parameter COMFAC or LINKTYPE MAM Connection to IOF with the project name RMS Remote Maintenance refused because there is already a user connected to IOF under this project Try again later This is a normal message no action need be taken unless there are other symptoms An operator already exists for the station and a change of operator is requested Given key character not present in string The SORT input file access is not correct under GAC Correct the SORT step JCL access inside infile parameter group refer to the SORT MERGE User s Guide There is a conflict between the SBR and an instrumental procedure Try to run SBR again later There is an inconsistency between the object description and the processing of the function Modify the user code Conflict in t
255. Processing stops Messages in the JOR indicate which units have been processed The listing of the current source unit may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC49 CLOSES OUTLIB RC edited_return_code Meaning An incident occurred after the creation of the output in the library specified by the OUTLIB parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result Processing stops Messages in the JOR indicate which units have been processed The output member of the current source unit may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC50 UNABLE TO DO A SEGSIZE RC edited_return_code Meaning There is a problem with the Virtual Memory Management facility Result Processing stops Messages in the JOR indicate which units have been processed Action Contact the Service Center 47 A2 10UJ 28 13 Messages and Return Codes Directory MAC51 MAC52 MAC53 MAC54 28 14 UNABLE TO DO A SGCR RC edited_ return_code Meaning There is a problem with the Virtual Memory Management facility Result Processing stops Messages in the JOR indicate which units have been processed Action Contact the Service Center
256. RAMETER Meaning Erroneous number of volumes assigned to a file the limit is 10 volumes Probably a user GPL program error In some cases it may indicate a system error Action Check and correct the GPL program INVALID LABEL VALUE Meaning Issued during a dynamic file assign The value given for the label option in the input structure sent is unknown Action Correct the GPL program INVALID WORK VOLUME SPECIFICATIONS Meaning In an ASSIGN statement a work disk was used for a file which is not temporary Result This error is usually detected at step initiation time the step cannot be started Action Use a normal volume to support the permanent files ALLOCATION ALREADY REQUESTED Meaning Several ALLOCATE statements appeared in the JCL for the same ifn only one is allowed Result The second ALLOCATE statement is ignored step initiation proceeds Action Check the JCL 47 A2 10UJ DF Messages DF19 ifn ALLOCATION NOT ALLOWED FOR CATALOGED FILES Meaning An allocation JCL statement ALLOCATE was requested for a cataloged file FILESTAT CAT Space preallocation PREALLOC is mandatory for cataloged files Result This error is usually detected at step initiation time the step cannot be started Action Preallocate the file if relevant DF20 SYSTEM I O ERROR ON SYS KNODET FILE Meaning System error An I O error has been encountered while accessing a system file during file assignment
257. RD NOT PERFORMED DYNAMIC ROLLFORWARD CANCELLED BY OPERATOR 04 Meaning The dynamic rollforward cannot be performed because of one of the following e the system cannot create a file descriptor message 01 e the system cannot assign the user file message 02 e the system cannot open the file message 03 e the operator cancelled a request for mounting the disk volume supporting the file message 04 Action Execute the utility FILREST followed by ROLLFWD for each file concerned Destination of the message JOR of the concerned TDS 47 A2 10UJ JP Messages JP66 jasname efn USER FILE DYNAMIC ROLLFORWARD NOT SUCCESSFUL ROLLED FORWARD RECORDS NUMBER OF ERRORS m 01 il B JP66 jasname efn USER FILE DYNAMIC ROLLFORWARD NOT SUCCESSFUL ROLLED FORWARD RECORDS UNABLE TO CLOSE THIS FILE return code 02 Meaning 01 errors occurred while applying an After Image to the specified file 02 no errors occurred while applying After Images to the file but it was impossible to close the file The file remains unstable il B Action Execute the utility FILREST followed by ROLLFWD for each file concerned Destination of the message JOR of the concerned TDS JP78 jasname STOP STRONG REQUESTED FOR THIS JAS ABORT OF THE STEP IS REQUESTED NOTE This message applies only to GCOS 7 HA Meaning The JAS jasname terminates after a CMSC command TSRV STRONG or after a timeout All ste
258. REACHED AT PGT Meaning Normal message after an abort of dynamic save END OF DISBAP OF ANY FILE FOR THIS SAVE Meaning Normal message after an abort of dynamic save A TERMINATE OR START COMMAND IS ALREADY ACTIVE Meaning Self explanatory SSMFRE FORCE COMPLETED TERMINATE SERVER Meaning Normal under TDYNSVR command or after an abort of the server NO MORE FILE UNDER DYNAMIC SAVE Meaning Normal message in TERMINATE process FINAL RE INIT FOR DYNAMIC SAVE SERVER Meaning Normal message in TERMINATE process 12 5 Messages and Return Codes Directory DU94 SERVER OF SAVE XRON NUMBER OF REMAINING DDYNSVR Display DYNAMIC SAVE Xron Xron FILES TO SAVE FILES TO SAVE decimal value decimal value WORKFILE BLOCK 4K USED decimal value SAVE WAITS FOR BATCH WAITED BATCH Xron SAVE WAITS FOR TDS SAVE IN SAVE PHASE DU94 DU94 DU94 DU94 DU94 NOT READY DU94 DU94 DU94 DU94 12 6 Meaning Normal end of the DDYNSVR Display PLEASE RETRY LATER TERMINATE RUNNING OR NO SERVER Meaning Self explanatory DYNAMIC SAVE SERVICE JOB ALREADY ACTIVE Meaning Self explanatory ABNORMAL TYPE 0 SEGMENT CREATION Return code Meaning Internal error TYPE 0 RESOURCES FOR DYNSAV NOT CREATED Meaning Created at GCOS 7 session start if Dynamic save purchased TURBOCONFIG DYNSERVO value TO ACTIVATE SERVER SEE DYNSERVO Meaning The two above messages show a SDYNS
259. RIGHTS OF THIS PROJECT project name are NOT SET ACCESS RIGHTS SETTING FORBIDDEN PROJECT NOT FOUND IN SITE CATALOG FUNCTION RESERVED TO SYSADMIN PROJECT Meaning Access rights setting on a file or directory has been requested via the CATMODIF utility but the access rights cannot be granted to the project specified in the message for the reason specified in the message 47 A2 10UJ DCT88 DCT97 DCT98 DCT99 47 A2 10UJ DCT Messages Result Some access rights to other projects may have been set or deleted by this utility The report produced by the utility indicates which actions have been performed Action Ensure correct access rights have been set ACCESS RIGHTS OF THIS PROJECT project name are NOT DELETED ACCESS RIGHTS DELETION FORBIDDEN PROJECT NOT FOUND IN SITE CATALOG FUNCTION RESERVED TO SYSADMIN PROJECT Meaning Access rights deleting on a file or directory has been requested via the CATMODIF utility but the access rights cannot be granted to the project specified in the message for the reason specified in the message Result Some access rights to other projects may have been set or deleted by this utility The report produced by the utility indicates which actions have been performed Action Ensure correct access rights have been set object name FILE NAME SYNTAX ERROR Meaning A file name specified in a parameter of the utility does not follow the catalog
260. ROPNAV 0A12 Error option not available EVRVIOL 1616 Event management ring violation EXECERR 180E Segment is not executable System Nucleus VMM An attempt to delete an executable segment Check the segment id 52 16 47 A2 10UJ EXHAUST 1COB DATANAYV to IOFAIL Return Codes End of data already signalled COBOL Status Key value 30 for READ operations 34 for WRITE to sequential or library files 24 for WRITE to files to other organizations BFAS UFAS Tape READ Attempt to retrieve or write a record out of file limits End reached on the media on which H_PR was assigned Provide more room for the data to be written WRITE Statement End reached on the media where the multi WRITE COBOL RTP DISPLAY Statement IDS II Access Journalization Other File READ Organizations WRITE PASCAL RTP READ SORT MERGE OUTPUT Procedure logical unit was assigned Action as above The index space is exhausted The Commitment Unit to roll back was not found in the list of active Commitment Units Send the PRLOG log to the Service Center Attempt to read beyond end of file DATALIM already signalled End of file reached Record not written No more space available An attempt has been made to read past the end of a file Test the EOF The subroutine SORT caller requests a sorted record after having received the DATALIM return code indicating the end of sorted records Correct the source program If this occurs in a
261. RSE The processing mode for a disk file is REVERSE The processing mode for a tape file is IO IA or UP The processing mode for a non standard tape file is APPEND The processing mode for a diskette file symbiant is not INPUT The processing mode for a standard diskette file processed with FSN ANY is not INPUT When allocation is requested for a diskette file the processing mode is not OUTPUT The specified efn is of incorrect length 57 13 Messages and Return Codes Directory DFPRE 8 INVUSE Set in the following cases The first file on a volume gives the IDRC non IDRC status of the first volume The files that follow it should have the same attributes as the first file but they do not IDRC compaction is requested for a media stored in a non IDRC cartridge library Density not supported DFPRE 11 ALREADY The specified ifn is at open state DFPRE 11 IFNERR An invalid ifn has been specified DFPRE 11 IFNSTRU The same ifn string is already in use for an active file of the same job DFPRE 11 IFNVIOL Specific EFD the same ifn string used by an ifn at open state DFPRE 11 NOWAIT The specified ifn is currently active for another primitive DFPRE 11 OPTERR Invalid function number requested DFPRE 17 ABOPROC An exception has occurred during code execution DFPRE 17 EFNUNKN The first tape of a tape file cannot be accessed MODPMD is only allowed for a mono volume file DFPRE 17 FUNCNAV A
262. RT NESTING OVERFLOW Meaning Too many dynamic resources needed by nested sorts 47 A2 10UJ TD04 31 TD04 32 TD04 33 TD04 34 TD04 35 TD04 36 TD04 37 TD04 38 TD04 39 TDXX YY 47 A2 10UJ TD Messages SORT MEMORY TOO SHORT FOR WORK FILE FILE BLOCK SIZE RC 5F841807 gt TRID 4 LNERR Action Refer to the description of WKDISK S in the SORT MERGE User s Guide INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support UNABLE TO EXTEND WORK FILE Meaning Self explanatory UNABLE TO RETRIEVE WORK FILE DEFINITION Action Report the problem to Technical Support NON SEQUENTIAL FILEORG OF WORKFILE IS RISKY AND SHOULD BE CHANGED Meaning Self explanatory Action Correct the JCL UNABLE TO CREATE SEGMENT Meaning The segment used for work file extents description cannot be created Return code from H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO CHANGE SEGMENT SIZE Meaning The segment used for work file extents description cannot be adjusted to the desired size Return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF WORK FILE ASSIGNED ON FBO OR FSA VOLUMES IS NOT UFAS SEQUENTIAL Meaning Self explanatory J
263. Refer to the table that follows for an explanation of the main exception conditions Result The step is aborted EXCEPTION class type exception identification exception parameter IN TASK taskname AT ADDRESS segmented address Meaning Indicates that an exception condition has been detected during the execution of the instruction at the specified address Exception conditions are usually the result of a user or system error Refer to the table that follows for an explanation of the main exception conditions Result The error is not considered as FATAL execution proceeds ABNORMAL RETURN CODE RC edited return code SET IN TASK task name AT ADDRESS segmented address Meaning Indicates that an abnormal condition has been detected during execution of the user program The return code gives the reason for the error The address specified is the address when the return code was set Result The step is aborted Action Contact the Service Center MAXIMUM EXCEPTION WARNING COUNT EXHAUSTED Meaning Indicates that more than 99 non fatal exceptions occurred in the execution of the step no more messages EX02 will be produced for further non fatal exceptions Result Execution proceeds Main Exception Conditions A list of the main exception conditions usually indicating a user error is given below First the class type is indicated then the message text Comments and or an example of the error follow 47 A2 10UJ
264. Return Codes Attempt to open a file whose integrity level is not met The Journal defined for the file is not sufficient according to the FILE INTEGRITY clause in the generation Attempt to open a shared file with no journal protection Attempt to open an monitored file that has not been declared as a TDS file during generation Modify the journal options in the catalog or DEFINE JCL statement Modify the source of generation Missing or inadequate DEFINE statement Required file integrity level cannot be obtained No dynamic corrective action may be performed Ensure DEFINE is included in the next TDS session No belt linked to character set Unknown operator System error Contact the Service Center Operator unknown Repeatable SENDO is forbidden in an interactive program There is an error in a parameter One subfile is already opened in output so output is no Record key is lower than that of the previous record COBOL Status Key value 21 System Trace Extractor UFAS and UFAS EXTENDED Indexed WRITE OUTVIOL 1464 OVERFLOW 1200 12FF 47 A2 10UJ The dates and or the sequence numbers of the extractor entry file are out of order The extraction has not been done systematically Completely rewriting the circular file will update it Otherwise reallocate or empty the collector output file In a creation step in OUTPUT mode the key to be inserted is less than the last key in the file Incompatibility bet
265. S BEEN DECLARED NOT REPEATABLE BY PROGRAM Meaning The user s program forbids a potential repeat of the current step after it has aborted The operator is not asked whether she or he wants the step to be repeated or not SUBFILENAME cli name UNKNOWN Meaning System error during the GET of an input enclosure Action Contact the Service Center JOB MANAGEMENT INTERNAL ERROR code Meaning System error while accessing a system file The code give the detailed reason for the error Action Contact the Service Center RESOURCE NOT AVAILABLE NOW resource identification Meaning This message is related to an IOF terminal It appears during the step initiation phase and is intended to warn the IOF operator that his request cannot be satisfied Resources that may be involved are the same as for RS04 see the Console Messages Directory If the resource is released before the message is displayed on the console or if it is a migrated file and ARS is active on the site the resource is not identified and the second part of the message is RETRY LATER Result The step initiation is aborted and the S prompt is sent to the terminal Action Try again later RELEASE JOB job id NOT FOUND Meaning A RELEASE JCL command specified a job which is not known by the system 47 A2 10UJ JB40 JB50 JB51 JB52 JB53 47 A2 10UJ JB Messages Result No job is released Action Check the job id specified
266. SER lt RxXxxx gt REPORT COMPLETED Meaning The printing of this report is finished Who receives the message The SUBUSER lt Rxxxx gt REPORT CANCELLED Meaning The report has been cancelled by a CTO command Who receives the message Usually the COMMANDSUB If an interruption occurs at the same moment as the CTO command it is the SUBUSER 47 A2 10UJ 46 3 Messages and Return Codes Directory Twos Twos Twos Twos Twos Twos 46 4 UNABLE TO OPEN SYS TW OUT lt retcode gt Meaning GT Writer cannot open the library SYS TW OUT Who receives the message The TWCOMMSUB if the problem occurs during H_TWCOMM launching The MASTER if the problem occurs during GT Writer initialization lt Rxxxx gt UNABLE TO DELIVER UNKNOWN TERMINAL Always followed by a TW11 message Meaning The terminal or pool does not exist a new generation has been done after this report has been created Who receives the message The SUBUSER lt Rxxxx gt UNABLE TO DELIVER UNKNOWN FORM Always followed by a TW11 message Meaning The paper format required for that report does not exist a new generation has been done after this report has been created Who receives the message The SUBUSER lt Rxxxx gt UNABLE TO DELIVER lt retcode gt Always followed by a TW11 message Meaning The access to a record of the file or subfile failed or this record is inconsistent Who receives the message The SUBUS
267. STORE parameter reallocate a library of type BIN using the BUILD_LIBRARY command if relevant MACOS TYPE SHOULD BE BIN FOR RETRIEVE n retrieve_file_efn Meaning The nth specified retrieve library is not of the expected type Result Processing stops No unit is processed Action Check the library name s specified in the RETRIEVE parameter MACO06 CRFD NO MORE SPACE TO LOCATE IFN FOR RETRIEVE n RC edited_return_code Meaning There is a problem of file management for the nth specified retrieve library Too many retrieve libraries have been specified or a system error has occurred Result Processing stops No unit is processed Action Decrease the number of retrieve libraries If necessary contact the Service Center MAC07 SYS GPL MACLIB NOT AVAILABLE RC edited_return_code Meaning The standard GPL retrieve library SYS GPL MACLIB is not available Result Processing stops No unit is processed Action The SYS GPL MACLIB library must be cataloged or resident Contact the Service Center 28 2 47 A2 10UJ MACO8 MACO9 MAC10 MAC11 MAC12 47 A2 10UJ MAC Messages INPUT AND OUTPUT LIBRARIES OR FILES MUST BE DIFFERENT gt input_file efn Meaning The input and output libraries or sequential files must be different to avoid the loss of the input source Result If only one input library is specified processing stops No unit is processed If several input libraries have been s
268. Service Center 47 A2 10UJ 39 7 Messages and Return Codes Directory 39 8 47 A2 10UJ 40 SC Messages General Environment SC message are produced by Communications Session Control Message Description scoi WRONG CONFIGURATION OR GREAT SEGMENT CANNOT BE ALLOCATED MAXISO amp MAXDSA ARE REDUCED OR AND A SMALL SEGMENT IS ALLOCATED 47 A2 10UJ 40 1 Messages and Return Codes Directory 40 2 47 A2 10UJ 41 SQ Messages General Environment SQ messages are produced by the BFAS sequential Disk File Access method However message SQ50 can also be displayed when library files are used In each message the user is provided with the internal file name ifn of the file the message is related to Pertinent Manuals BRAS User s Guide ii carcino T dee nae eee bee 47 A2 02UF SCE Se Guid eet ese ee tin Gin aco a Re ae 47 A2 12UJ Message Descriptions Qo1 IFN ifn OPTION MOUNT ALL IS MANDATORY FOR THIS PROCESSING MODE Meaning The value indicated in the MOUNT parameter of the JCL is less than the number of volumes in the volume list and the processing mode specified in the program requires that all the volumes supporting the file be mounted at the same time All the volumes must be mounted when the processing mode is e UPDATE I O in COBOL e INAPPEND or INOUTPUT Result The file cannot be opened An abnormal return code is set by
269. Services Language must be corrected Each error is underlined by a TD02 48 MULTIPLE LITERAL TYPE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 49 LITERAL MISSING Action The option string or DSL Data Services Language must be corrected Each error is underlined by a 47 A2 10UJ 42 11 Messages and Return Codes Directory TDO2 50 TDO2 51 TDO2 52 TDO2 53 TDO2 54 TDO2 55 TDO2 56 TDO2 57 TD02 58 TD02 59 42 12 AND MISSING Action The option string or DSL Data Services Language must be corrected Each error is underlined by a END PARAGRAPH MUST BE EMPTY OR COMMENT Action The option string or DSL Data Services Language must be corrected Each error is underlined by a LENGTH OF ARRANGED RECORD gt 32767 Action The option string or DSL Data Services Language must be corrected Each error is underlined by a NO ZONE SPECIFIED IN ARRANGE LIST Action The option string or DSL Data Services Language must be corrected Each error is underlined by a OVER 128 ERRORS ON ABOVE LINE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a NO VALID KEY SPECIFICATION OCCURRED Action The option string or DSL Data Services Language must be corrected Each error is underlined by a UNABLE TO CREATE SEGMENT Meaning The main
270. Some return codes for example DONE ALREADY do not indicate an abnormal condition and consequently do not require any corrective action There is a list of abbreviations used in the nterpreting Return Codes Section 47 A2 10UJ 51 1 Messages and Return Codes Directory ABNCCAD 0487 Abnormal completion code returned with additional data Job Management Chkpt Res Call Checkpoint taken but problem may occur at restart If rightmost 32nd character of returned data string is 1 the next checkpoint will fail ABNORMAL 0100 7FFF Operation has not been performed because of abnormal execution condition ABOPROC 04C2 Fatal error abort the current running procedure Catalog Management DMU FILPATCH IDSAI Access IOF Network Management PCF SORT MERGE SBR UFAS EXTENDED ABORT 04C0O 04E0 DMU QUIT 51 2 System error Contact the Service Center Error detected in the ITEM option analyzed by the load module Internal processor error Take a dump and contact the Service Center Abnormal termination of IOF session or a TERMINATE _JOB command has been processed for the current IOF System error due to an incoherent server state in the System Table Contact the Service Center Abort of the process group 1 The user sent the END command 2 A fatal exception in PCF In this case send a STAR TD xx yy The message prefix gives the sort module number xx that chose the Internal Sort numbe
271. T BACKOUT NONE NO DEFERRED RESYNCHRONIZATION Y N9 NOT RESTARTABLE COMMITMENT XCP2 Y N Response to DISPLAY TX DTX spec tx for XCP2 transaction TX20 SWAP_FILE ACT LOGGED _CNTXT OCCUPANCY TX21 swapifn active ctxnb Response to DISPLAY TDS SWAP ALLOC_FACTOR occup alfactor NOTE The number of user contexts displayed may not correspond to the number of users logged on because TDS dynamically reports all contexts including breaks and logons If only swap file is declared the allocation factor is set to 100 47 4 47 A2 10UJ TX Messages TX22 cornmi cornm2 cornm3 cornm4 cornm5 Response to LIST_TDS_COR DTLD 0 TX23 CORRESPONDENT ADDRESS TX_COUNT TPR_COUNT STATUS TX_NM TX24 cornm coraddr txnb tprnb status txnm Response to LIST_TDS_COR TM DTLD TX25 TDS tds date_time heading CHARACTERISTICS OF THE TRANSACTION LIST OF CORRESPONDENTS LIST OF POOLS LIST OF SESSIONS WITH SPAWNS LIST OF SPAWNEES WITH QUEUE LENGTHS LIST OF TRANSACTIONS Response to DTX spec tx LIST_TDS_COR LIST_COR_ POOL LIST_TDS SPAWN DTLD 0 LIST_TDS SPAWN DTLD 1 2 3 4 5 6 DTX TX26 CORRESPONDENT ADDRESS COR_BACKUP cornm coraddr corbck Response to LIST TDS COR TM DTLD NG TX27 CORRESPONDENT ADDRESS NB_OF_POOLS cornm coraddr poolnb Respons
272. TALOG is not valid Result The system cannot be initialized Action Verify that the SITE CATALOG is on the RESIDENT volume of the site and is correctly validated DFO7 ifn TOO MANY ASSIGN OR ASSIGN SUBFILE TABLE OVERFLOW Meaning Issued during an ASSIGN ALLOCATE or a DEFINE when the number of internal file names within the step exceeds the system capacity Issued during an ASSIGN if number of assignments or assignments with SUBFILE in the step exceeds the system capacity Result This error is usually detected at step initiation time the step cannot be started Action Run CONFIG 10 2 47 A2 10UJ DFO8 DFO9 DF10 47 A2 10UJ DF Messages ifn INVALID DEFINE STATEMENT Meaning Issued during an ASSIGN or a DEFINE when attributes specified in both statements relative to the same file are incompatible e g the ASSIGN indicates DEVCLASS PR and the DEFINE specifies parameters for a PUNCH device Result This error is usually detected at step initiation time the step cannot be started Action Check the JCL ifn INVALID CONCATENATION REQUEST Meaning This message may appear in the following situations e The first ASSIGN statement encountered in a step enclosure does not contain the ifn NOTE The only case when an ifn can be omitted is file concatenation the external file specified in the ASSIGN statement is concatenated to the file declared in the ASSIGN statement preceding the
273. TDS as an ordinary correspondent he cannot be the master of the starting session display of return code DUPNAME MV42 TIMEOUT UPON CONNECTION TO NODE xxxx MBX mailbox_name TPR tpr_name Meaning Warning message This message is sent when the TDS generation clause MAXIMUM WAIT TIME UPON SYNCHRONOUS SEND IS nmin is present 47 A2 10UJ 29 31 Messages and Return Codes Directory MV60 MV61 MV62 MV63 MV70 MV79 29 32 and when the nmin value is exhausted during an asynchronous outward CONNECTION NODE xxxx is the name of the destination node This means that the connection destination did not answer during the WAIT TIME XA SERVICE DAMAGED Meaning A protocol error has been made by TDS XA or a swap failure occurred Action None Internal error XA SESSION CANNOT BE INITIALIZED FOR ORACLE Meaning The SM containing ORACLE7 TDS is not loaded or the correct library is not specified in the JOBLIB statement of the TDS job Action Ensure that the SM containing ORACLE7 TDS XA is loaded If it is check JOBLIB statement of TDS job ERROR DURING XA RECOVERY PHASE Meaning ORACLE7 TDS XA has been asked to perform XA recovery in a bad context or with incorrect parameters which involved a protocol error Action None Internal error XA FUNCTION IS NOT AVAILABLE Meaning The product TDS XA Marketing Identifier has not been purchased for the site Action Verify if the product was pu
274. TE If the jasname JADIR file is expandable an extent is automatically created and no JP22 message appears jasname THE jasname JADIR DIRECTORY FILE IS ALMOST FULL STEP REJECTED Meaning The After Journal detected that its SYS JADIR file is almost full The After Journal may not be able to assure file integrity Create anew SYS JADIR before starting a new journalizing step Action None Destination of the message JOR of the starting step jasname WARNING POSSIBLE PREDATING LAST RECORDED AFTER JOURNAL DATE date or time JOURNALIZATION IS WAITING FOR OPERATOR DECISION 01 jasname WARNING POSSIBLE POSTDATING LAST RECORDED AFTER JOURNAL DATE date or time JOURNALIZATION IS WAITING FOR OPERATOR DECISION 02 Meaning Message 01 after journalization starts and the date or time is before the last date recorded for the After Journal Question JP31 is simultaneously sent to the operator Message 02 after journalization starts and one working day has expired without journalizing in the After Journal Question JP32 is simultaneously sent to the operator The person who submitted the job receives this message This person should contact the operator to confirm his her decision to abort or not abort the current step The person who submitted the job cannot make the decision alone because if the current step is predated there will be no control for all the steps using the After Journal Action The person who submitted the jo
275. TION STRING COMFILE IS FORBIDDEN WITH SOURCE Meaning Inconsistency in compiler options delivered to RDN module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center ERROR WHILE PROCESSING OPTION STRING INLIB MISSING WITH SOURCE STARNAME Meaning Inconsistency in compiler options delivered to RDN Source starname is used and no INLIB has been specified Result The compilation is aborted Action Correct the JCL 47 A2 10UJ RDN Messages RDN21 ERROR WHILE PROCESSING OPTION STRING NDIAGIN REPLACED BY DIAGPT Meaning Inconsistency in compiler options delivered to RDN module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center 47 A2 10UJ 36 5 Messages and Return Codes Directory 36 6 47 A2 10UJ 37 RR Messages RR messages have the following general form RR nn xx where nn and xx may have the following values nn Meaning 00 SYS URCINIT 01 SYS IN 02 SYS OUT 03 JCFI 04 JOR 05 JCFS 06 q
276. The following notation conventions are used in this manual when describing the format of error messages Error messages have the following general format 1imn message text where 11 is atwo or three letter classification code and mn is the number of the message within its class The text after the code explains the cause of the error or gives a further numerical classification followed by a return code UPPERCASE lowercase message text 1 message text 2 message text 3 None The word s appear in the message exactly as shown Indicates a value which varies depending on the context of the error A column of message texts between braces means that one of these message texts is output depending on the context of the error Messages and Return Codes Directory vi 47 A2 10UJ 1 The Job Occurrence Report 2 Interpreting Error Messages 3 BN Messages 4 CBL Messages 5 CG Messages 6 CK Messages 7 CL Messages 8 DCT Messages 9 DDM Messages 10 DF Messages 11 DS Messages 47 A2 10UJ Table of Contents Messages and Return Codes Directory 12 DU Messages 12 1 Module H_Dfsrd_Clone iina aa aaa a a aii 12 2 12 2 Module FA Dfsrd DyN Presario reegen e A EEEE AA EE EEEE 12 2 12 3 Module H _Dfsrd Fi Duearciron adanan naarn Aa AEA AEE RAITEEN INEP AEEA 12 2 12 4 Module H_DisrdslRWliaccienticntndciincienkgetd drancuiin E inal ieee 1
277. The processing mode used IN OUT I O APPEND conflicts with another parameter Correct the program The processing mode implies writing but ASSIGN specifies ACCESS READ or SPREAD Correct JCL The processing mode at file opening does not allow that COBOL clause The type of access requested for a file is incompatible with the open mode For example PUT or WRITE was requested when the file was opened in RESET mode Change the opening mode Processing mode not allowed 54 35 Messages and Return Codes Directory TDS Unit Record Driver OPEN Diskette WRONGSSF 1DC1 Unit Record Driver OPEN Printer WRITE WRONGSTA 0450 Attempt to open a TDS controlled file in OUTPUT or APPEND processing mode Change the PMD parameter it must be INPUT or UPDATE Processing mode is not IN OU AP in standard or IN OU IO in foreign Wrong SSF data Inconsistency in the data form parameters and or the VFU Correct program Incorrect system header A line may be out of place in the page DOF SSF or ASA At least one macro statement has been lost Macro processing is restarted at the next statement FORMS System Nucleus Dynamic Addresser TDS Transaction Network Subsystem WRVIOL 1483 YES 0000 Dump Analyzer YETALLOC 1C16 File Management File Space Management Utilities 54 36 The contents of the data map are invalid Check that the form is valid and has not been corrupted Contact the Service C
278. The requestor does not have access rights for the specified file See the Data Security Facilities User s Guide File currently assigned to another job Internal error in the file s characteristics File data lost due to a crash at creation time Device class error check syntax Specified device not available check syntax Device overflow too many devices indicated External file name unknown check syntax Entry overflow number of entries exceeds limit try M CLOSE_TDS_FILE DEASSIGN again Volume s of a multivolume file missing A file must be recovered before it can be opened For IDS II areas the return code corresponds to one of the following 1 The assigned area is not an IDS II area 2 The assigned area name is not the name declared for this ifn 3 The file s user label is invalid 4 The schema date is different from the area date For detailed explanations see the JOR 58 3 Messages and Return Codes Directory 1821 0A10 1898 0A03 0900 1C07 1806 1462 1219 1C02 58 4 IFNERR IFNNASG KEYERR MDNAV NASSIGND OPEN OPTERR SHLVVIOL TABOV WRONGORG Internal file name in error file may already be open the syntax may be incorrect or there may be an internal error Internal file name already assigned Issue an M CLOSE TDS_ FILE DEASSIGN then M OPEN TDS FILE Source program record key and PREALLOC record key do not match Media not avail
279. This error condition corresponds particularly with a transfer attempt on an unformatted area of the disk On CKD VBO volumes use preformatting On other types of volumes there is a disk subsystem error A logically deleted sector has been detected foreign processor Record size error Illegal record size value O or negative Internal consistency check failed Step aborted Record size too large or record format FB and block size is not a multiple of record size or record format V and record size is less than 5 The SBR file has the wrong record size Check the record size against the RECSIZE parameter of the JCL command SBR They must be equal and a power of two between 4096 and 16384 Current record size value not in range of values 128 256 512 when RECFORM U for a foreign processor Record size greater than sector size or block size Action rejected Relocation was applied Relocation not performed because of NORELOC request Incorrect relationship type Relationship unknown on volume 53 37 Messages and Return Codes Directory REPNEED 1E0B Repositioning needed COBOL Status Key value 91 for tape Availability Control Set Function File Management Mask Set Operating Mode System Disk File Storage and Tape Handling Physical I O Access Various Internal REQOVLD 0505 REQUNKN 100A Dynamic System Display File Management FORMS SBR System Trace RESIDENT 0D00
280. UNLOCK BFAS UFAS Tape H LOCK Files H UNLOCK BFAS Sequential NOMATCH 1878 Dump Analyzer COBOL RTP Dynamic System Display File Management FORMS System Disk GCL GTWriter IDS I Access Journalization Network Generation 53 16 There is an error in TNS initialization Refer to the Network Generation Message An error has occurred during UFAS EXTENDED step initialization Contact the Service Center No lock No locking semaphore available for this IFN No semaphore is available in the system No matching name The symbol specified as a parameter cannot be found in the Symbol Table Try again with another symbol the symbolic map may not be present in the dump segment A7 Normal return code No line number is available for this semaphore address in the PCF database Virtual screen unknown The file label to be deleted is not the last one The creation date of the form does not match the creation date of the program structure Update the creation date and recompile the program This is a warning indicating that there is no matching name No generation is performed GT Writer stops Interface error with the General Index Manager Contact the Service Center After an IDS dynamic action abort the identification of the dynamic action was not found in the journal at rollback 1 Mismatch between the permanent and running workspaces restart GCOS 7 with the CLEAN option or 2
281. UPLICATE STATION NAME VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning As in message text Action None 47 A2 10UJ 33 9 Messages and Return Codes Directory PT62 UNABLE TO CLOSE MESSAGE GROUP RC return code Meaning A system error has occurred in terminating a duplex message transmission Action Try the transmission again If the same error persists contact the Service Center PT63 UNABLE TO INQUIRE RC return code Meaning Software error Action Contact the Service Center 33 3 Vcam Error Messages 33 3 1 Status The status of user connections that are rejected is 35 In some messages STATUS appears as BYTE1 The following supplementary STATUS values are for Maintenance Purposes only TBL NE hh Status 30 CHECK 31 SKIP 32 ALREADY 33 DACTIV 34 RESOV 36 SYSTERR 37 LMBXSAT 38 DSTUNSPEC 39 TURNVIOL 3A USERNG 3B TRUNC 3C NODATA 3D MOREDATA 40 INTPDNG Other STATUS values are given in C REASON 33 10 PT Messages 33 3 2 Reason 47 A2 10UJ The following values give the reason for disconnection In some messages REASON appears as BYTE2 TBL NE hh Reason 01 ABNORMAL TERMINATION 02 ACCEPTOR CUSTOMER NODE INOPERABLE 03 ACCEPTOR CUSTOMER NODE SATURATED 04 ACCEPTOR MAILBOX UNKNOWN 05 ACCEPTOR MAILBOX INOPERABLE 06 ACCEPTOR MAILBOX SATURATED 07 ACCEPTOR APPLICATION PROGRAM SATURATED 09 DIALOG PROTO
282. V UNABLE TO ASSIGN DYNAMIC DISK WORK FILE Action Check the return code from H DYNASG UNABLE TO RETRIEVE WORK FILE DEFINITION Action Report the problem to Technical Support 42 35 Messages and Return Codes Directory TD37 04 TD37 05 TD37 06 TD37 08 TD37 09 TD37 10 TD99 99 42 36 UNABLE TO DELETE WORK FILE DEFINITION Meaning Sort is deleting useless FD file definition table The return code from H_DLFD is given Report the problem to Technical Support UNABLE TO ALLOCATE DYNAMIC DISK WORK FILE Action Check the return code from H_DYNAL TOO FEW WORK DISKS lt 2 FOR A PARALLEL SORT Meaning For a parallel sort at least 2 disks are needed Only one workfile is assigned WKASG1 and or only one MEDIA is specified WKFILE WKDISK UNABLE TO IDENTIFY WORK FILE Meaning Sort is unable to know which volume supports the workfile H_RTVLID The return code from H_RTVLID is given STATIC H_WSTAxx ASSIGNMENTS MUST BE CONSECUTIVE FROM H_WSTAO1 Meaning For a multi process sort the static assignments must start from H_WSTAOI1 and there must be no gaps in the sequence H_SRTWKD AND H_WSTAxx CAN T BE TOGETHER ASSIGNED Meaning WKFILE H_SRTWKD and WKASGi H_WSTAi are mutually exclusive USER SORT CALL VIOLATION Meaning The primitives H_BEGSRT H_RELSRT H_SRT H_RETSRT and H_ENDSRT have been called in the wrong order In COBOL this incorrect order could be caused by wrong end
283. VEL VALUE Meaning The SHRLEVEL value of the file description indicating in which segment type the file control structures are allocated is unknown Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center 35 1 Messages and Return Codes Directory QLO3 QLO4 QLO5 QLO6 QLO7 35 2 IFN IFN IFN IFN IFN ifn INVALID RECORD FORMAT Meaning The RECFORM value found in the file description is unknown Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn RECORD FORMAT NOT SUPPORTED KEY OR TRACK OVERFLOW Meaning The specified record format is not supported records with key or records with track overflow Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn RECORD FORMAT NOT SUPPORTED SPAN Meaning The specified record format is not supported spanned records Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn COMPACTION NOT SUPPORTE
284. VR with type 0 structures not created DY NSERV0 00 x or a server already active DYNSERV0 02 x ABOVE MESSAGE IN H_DFSRD_VALIDCI PLUG Action Indicate the module sending the preceding message ABOVE MESSAGE IN H_DFSRD_FREECI PLUG Action Indicate the module sending the preceding message ABOVE MESSAGE IN H_DFSRD_ENDFIL PLUG Action Indicate the module sending the preceding message END OF FILE REACHED Meaning End of the dynamic save of the current file 47 A2 10UJ DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 DU94 47 A2 10UJ DU Messages ABNORMAL CLOSE RWI ON WORKFILE Return code Meaning Internal error ABNORMAL CLOSE WORKFILE Return code Meaning Internal error ABNORMAL DLFD ON WORKFILE Return code Meaning Internal error ABOVE MESSAGE FROM H_DFSRD_ENDSAV PLUG Action Indicate the module sending the preceding message ABOVE MESSAGE IN H_DFSRD_CIMAX PLUG Action Indicate the module sending the preceding message INVALID DYN SAVE NB gt 32 OR lt 1 IN FILE INTERNAL ERROR Meaning Internal error MISMATCH ON SLAVE POINTER INTERNAL ERROR Meaning Internal error SERVER TERMINATION RUNNING CALL TO WRONG SLAVE Meaning Synchronization instructions are bypassed when the TERMINATE operation is running It may be after a TDYNSVR GCL command normal or after an abort of the dynamic save server abnormal UTILITY SAVE
285. WEST GENERATION MAY NOT BE ASSIGNED CONCURRENTLY Meaning The following situation exists e The job contains two ASSIGN statements which reference two generations of the same generation group e The two ASSIGN statements are active because either both belong to the current step or one of them belongs to the current step and the other belongs to a preceding step and the file has been passed e One of the ASSIGN statements refers to the oldest generation known in the catalog and the other ASSIGN statement refers to the next generation of the file to be created Simultaneous access to these two generations is not allowed because the new generation will overwrite the oldest generation Result This error is usually detected at step initiation time the step cannot be started DS10 efn FILE NOT ACCESSIBLE SECURITY LOCK OR ABORT LOCK SET Meaning For special reasons the file cannot be accessed with the usual access rights associated with the project Either the security lock is set the file is no longer accessible until this lock is reset by the owner of the file or the abort lock is set due to an abort of a job which used this file only the projects with RECOVERY right can access this file Result This error is usually detected at step initiation time the step cannot be started Action The owner of the file should be consulted DS12 efn SHARE OR JOURNAL VALUE FOR SAME FILE CANNOT BE DIFFERENT Meaning An attempt has been
286. WSIDENT error Unable to access MPD parameter Unable to access MBX parameter Wrong link to next entry device in parameter Caller s MBX is not active Caller s MBX does not belong to caller s W MSI LO8JNUMB greater than maximum allowed by CONFIG physical process work station Caller s MBX is saturated 33 13 Messages and Return Codes Directory 8D 9B 9D AC AD AE AF Bl B2 B3 B4 B5 33 14 34 38 36 AC AD AE AF NOTDONE return code during semaphore allocation Destination mailbox not specified by initiator and no default option exists in catalog Reason V_R_DMBXUNK Destination type is RDTN and an unexpected return code is given by dictionary when retrieving the V_RDTN object AC AC Asynchronous catalog access completion and caller was not waited for Reason V_R_DNODENOP Asynchronous catalog access completion caller was not waiting for Reason V_R_DNODENOP Unable to access submitter set MGI _P04AREA parameter error Unable to access terminal identical MGI PO4AREA parameter error Unable to access User Identification MGI_PO4AREA parameter error NOTDONE return code from dictionary when retrieving source mailbox name NOTDONE return code from dictionary when retrieving local node name NOTDONE return code from dictionary when retrieving destination node name NOTDONE return code from dictionary when retrieving initiator node name in case of remote initiator Reason
287. Y REMOTE APPL Meaning The passthrough connection opened by the remote application has been terminated by the application Action None UNABLE TO RECEIVE IT Meaning Interrupt break cannot be acknowledged Action None If the problem persists contact the Service Center REMOTE IOF ABNORMALLY DISCONNECTED Meaning A rupture in the communications link with a remote system has occurred Action None If the problem persists contact the Service Center UNEXPECTED VCAM INTERRUPT Meaning System session has been interrupted Action None If the problem persists contact the Service Center UNABLE TO SEND_IT RC return code Meaning Interrupt break is not recognized for transmission Action None If the problem persists contact the Service Center UNEXPECTED STATUS ON SEND_IT Meaning Interrupt has been sent but not correctly acknowledged Action None If the problem persists contact the Service Center UNEXPECTED STATUS ON RECEIVE Meaning Data transmission from remote site is invalid Action None If the problem persists contact the Service Center UNABLE TO RECEIVE MESSAGE RC return code Meaning The turn for transmission has not been acknowledged by sender Action None If the problem persists contact the Service Center 47 A2 10UJ PT41 PT42 PT43 PT44 PT45 PT46 PT47 PT48 47 A2 10UJ PT Messages UNEXPECTED STATUS ON SEND Meaning Data transmission to remote
288. Y SEQUENCE ERROR Meaning Self explanatory Action Report the problem to Technical Support UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support 47 A2 10UJ TDO6 TDO6 TDO6 TDO6 TDO6 TDO6 TDO8 TDO8 TDO8 TDO8 47 A2 10UJ 03 04 05 06 07 08 01 02 03 04 TD Messages UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The buffer segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support UNABLE TO LOCK B_SEGMENT Meaning Return code from H_SGLOCK is given Action Either SIZE is smaller than the locked memory needed or the problem must be reported to Technical Support UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Meaning Report the problem to Technical Support UNABLE T
289. a a tevdtedl na A hee 47 A2 02UF NAE BE ERTA AIE Guide sco ia a AE EE 47 A2 12UJ UFAS Extended User s Guide cccccccccccsssssssssesssesssssssesssesssesesesesesessnesenenes 47 A2 04UF Message Descriptions ifn ONE BLOCK SKIPPED AFTER I O ERROR ON TAPE Meaning Warning message indicating that an error occurred during an I O operation read on a tape file As the ERROR SKIP option was specified the erroneous block was skipped Result Execution proceeds on the next block ifn TAPE REPOSITIONING HAS BEEN TRIGGERED AROUND BLOCK NUMBER nn IFN Meaning An I O incident occurred on a tape file requiring the tape to be repositioned nn is the block number on which the tape is to be repositioned ifn APPEND ON 18 TRACK CARTRIDGE NOT ALLOWED ON 36T DEVICE Meaning The user has attempted to write in append mode on an 18 track cartridge mounted on a 36 track device 45 1 Messages and Return Codes Directory TS48 TS49 TS50 45 2 IFN ifn SUCCESSFUL RECOVERY AFTER GLOBAL TAPE POSITIONING ERROR IFN Meaning The tape was successfully repositioned using the global tape repositioning processing This message is usually preceded by message TS47 ifn UNSUCCESSFUL RECOVERY AFTER GLOBAL TAPE POSITIONING ERROR IFN Meaning Repositioning was not successfully performed using the global tape repositioning processing Result An abnormal return code is set by the access method and the
290. a i a e A a R ada 47 A2 71UL Message Descriptions MACOO uu nn SUMMARY FOR input_unit_name error_summary NO INCOMPLETE OUTPUT PRODUCED n DEF PROCESSED STORED Meaning Information message displayed for each unit processed The message indicates e the version uu nn of MACPROC e the name of the source member of a library or unit of a sequential file e the summary of errors detected i e the number of errors of each relevant severity level e whether or not an output unit was produced e the number of internal prototypes DEF processed or stored in a permanent library if any MACO1 SILENT OPTION IS INEFFECTIVE IN BATCH MODE Meaning Observation message only Incorrect SILENT option in JCL Result Processing continues Action Do not use the SILENT option in Batch mode 47 A2 10UJ 28 1 Messages and Return Codes Directory MACO3 TYPE OF OUTLIB SHOULD BE SL Meaning The specified output library is not a source library Result Processing stops No unit is processed Action Check the library name specified in the OUTLIB parameter Reallocate a type SL library with the GCL command BUILD_LIBRARY if relevant MACO4 TYPE SHOULD BE BIN FOR STORE store_file_efn Meaning The specified library to store macro prototypes is not of the expected type Result Processing stops Messages in the JOR indicate which units have been processed Action Check the library name specified in the
291. a stack Address error Index error Check fails on number of records on a media J number error Media error Not possible for a link Not possible for an alias 47 A2 10UJ 47 A2 10UJ 1820 1821 1822 1823 1824 182F 1825 1826 1827 1830 1831 1833 1834 1835 1836 1837 1838 1839 183A 183F 184F 1850 1851 1852 1853 1854 185A 185E 185F 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 186A 186B 186C 186D 186E 186F 1870 187F 1871 EXTERR IFNERR PCERR ADFTERR LABELERR EFNERR TYPERR NSTDLAB RWIDERRL FECBERR FLIDERR NUMBLERR SYNCERR SHRERR FLIDMISS RIMISS FRMTERR LOCKERR WRONGPAR NULLPTR SAMERR SGTPERR PNBERR ARGERR PROTERR MOUNTERR VOLOUT RECSZERR RECFERR BLKFERR BLKSZERR DIRERR ASGERR VTOCERR BDELERR IDELERR EDELERR PCSERR UFATERR UBUGERR OBJTPERR RELTPERR BAMERR DESCERR NAMEERR TRNMERR Return Codes Listed in Numerical Order Extent error IFN does not lead to a valid structure Physical channel error Address format error Value of label is incorrect EFN does not match Label type does not match Non standard label RW session identification error FECB error argument is not a valid FECB File identification error Erroneous number of blocks Synchronization mode error Sharing violation File identification is missing Request identification is missing Error in format request Error in lock count value Wrong parameter Reference to a null po
292. abel when the file already exists and the file label contains this information in this case the file label is incoherent e in the file description of the program or in a JCL statement DEFINE when either file is to be allocated by the step execution or when the file already exists but the file label does not contain these characteristics DOS VS files in this case a correct value must be specified either by modifying the program or by specifying the value in a JCL statement DEFINE ifn ILLEGAL BLOCKSIZE VALUE GREATER THAN TRACK CAPACITY Meaning Disk file allocation is required by the step execution but the provided blocksize value exceeds the track capacity Result The file cannot be opened and the abnormal return code BLKSZERR is set by the access method Action Specify a smaller value for BLKSIZE in a JCL statement DEFINE ifn ILLEGAL PROCESSING MODE FOR DOS 360 FILE ONLY IN UP OU ALLOWED Meaning For DOS 360 IBM disk files the only processing modes applicable are INPUT UPDATE I O in COBOL or OUTPUT The APPEND EXTEND in COBOL processing mode is not allowed 41 5 Messages and Return Codes Directory sQis SQ20 SQ23 sQ50 41 6 IFN Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn ILLEGAL PROCESSING MODE FOR PHYSICAL LEVEL ONLY IN OU ALLOWED IFN IFN IF
293. able issue CR MSnn No ASSIGN for the internal file named in M OPEN TDS FILE File already opened Missing or inadequate DEFINE Required file integrity level cannot be obtained No dynamic corrective action may be performed Include the DEFINE in the next TDS session SHARE MONITOR not specified for a TDS controlled file Either a TDS controlled file is not UFAS or there is an internal error Error in file organization usually non UFAS file specified as a TDS controlled file 47 A2 10UJ 59 XBUP Messages Messages of type XBUPnnn are produced by RDDF 7 A full description of these messages is given in the document RDDF 7 V2 Administrator s Guide oorr 47 A2 44US 47 A2 10UJ 59 1 Messages and Return Codes Directory 59 2 47 A2 10UJ A Completion Codes for I O Errors An I O Completion Code is a special kind of return code that indicates the status of an Input Output hardware event You can find I O Completion Codes within a message sent by a system component They are usually indicated by IOCC xxxx COMPLETION CODE lt XXXX gt COMPLETION CODE XXXX or something similar Here is an example of a Completion Code in a message QL50 FATAL I O ERROR ON DIRECTORY OR BAM BLOCK NUMBER lt blk_number gt COMPLETION CODE lt XXXxX gt The meaning of the completion codes are listed below for cartridge tape errors tape errors and disk errors C
294. ady exists in the library directory either as the main entry point or as the second entry point of another procedure Result The new CU is created in the library but the name is not cataloged in the directory as an alias of this CU Action Use the LIST command of LIBMAINT CU to check the contents of the CU library PAS23 CLOSES DELETE CULIB MEMBER member name RC edited return code Meaning The compiler was unable to delete the old version of the CU in the CU library The reason for the incident is given by the return code Such an incident is very unusual and may indicate a system error Result The compiler proceeds Action Use the LIST command of the LIBMAINT CU to check the contents of the library If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center PAS24 CLOSES CULIB WORK MEMBER member name RC edited return code Meaning The compiler was unable to close the CU work member The reason for the incident is given by the return code Such an incident is very unusual and may indicate a system error Result The compiler stops The old version of the CU is available in the CU library Action Use the LIST command of the LIBMAINT CU to check the contents of the library If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center PAS25 STOW DELETE CULIB ALIAS alias name
295. ady open If message is not expected by program logic correct program An OPEN statement has been issued for a multi logical unit file which is already open Area or index already opened Another message is already open in the process Attempt to assign and or open a file that is already open Check the IFN or state of the file Close and or deassign the IFN before re assigning and or re opening the file Subfile already opened Library subfile is already open Decision taken by operator Transaction cancelled by TDS Master Operator Operator queue overload Overflow on the operator message queue Too many SWI commands Too many dynamic commands at present Try to launch command again later Scientific options unknown Option string not available Option not available Check JCL Error in option chain 53 25 Messages and Return Codes Directory OPTERR 1806 Compiler Error Logging File Management FORMS GAC and GAC EXTENDED GTWriter IDS II Program Reading Save and Restore OPEN CLOSE DEASSIGN Access Job Management File Any Operation and Device Management TDS COMFAC OMH RDN Services System Nucleus Internal 53 26 Message Management U_RDN_ECUOP T Time Handling Process Group Loading Increasing Processing Time Error in options An error was found in the list of options given to the Compiler When a log file is opened the allocation
296. age Fatal Dump taken No MU18 UNSUCCESSFUL CLOSE OF AFTER JOURNAL Action None internal error Type of message Fatal Dump taken Yes MU19 UNSUCCESSFUL CLOSE OF BEFORE JOURNAL Action None internal error Type of message Fatal Dump taken Yes mu20 PLEASE CHECK M I Action check whether the product M I Marketing Identifier has been purchased for this site Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master MU21 ERROR WHILE READING DEBUGFILE Action None internal error 47 A2 10UJ 29 5 Messages and Return Codes Directory Type of message Warning Dump taken No Recipient of the message TDS Master MU22 STATIC DYNAMIC ASSIGN CONFLICT ON IFN xxxxxxxx EFN XXXXXXXXXXKXKKXKXXKX Action There is a conflict at TDS warm restart between the ASSIGN statement of the job description and the dynamic file assignment of the previous TDS session external file names or catalogs are not the same as those assigned dynamically Access to the file is denied Type of message Warning Dump taken No MU23 CANNOT RESTORE POOL OF SESSIONS Action Re issue the M OPEN COR POOL or the M MODIFY COR POOL command to re establish the pool of sessions Type of message Warning Dump taken No Recipient of the message Main Operator MU24 CANNOT RESTORE COMMON STORAGE AT RESTART Action None The common storage is reset to zeros Type of mes
297. age PAS15 PAS21 PUT CULIB WORK MEMBER member name RC edited return code Meaning The compiler was unable to write a CU record in the CU library The reason for the incident is given by the return code The return code DATALIM indicates the CU library is full Remember that the compiler generates the CU ina work member before replacing the old version of the CU by the new one Thus enough room must be provided in the CU library to create the work member even when an old version of the CU already exists in the CU library Result Compiling stops The old version of the CU if it exists is still available in the CU library Action Compile the program again using another CU library or delete the old CU If the incident was an I O error check the disk and the disk pack supporting the library or delete the old CU 31 6 47 A2 10UJ PAS Messages PAS22 STOW ADD CULIB ALIAS alias name TO member name RC edited return code Meaning The compiler is processing the PASCAL program member name and this program contains a secondary entry point named alias name The compiler is trying to store the name of the secondary entry point as an alias of the main entry point i e both names lead to the same CU member in the library directory An incident occurred during this operation The reason is given by the return code The most common incident is return code DUPNAME meaning that the name of the second entry point alre
298. age warns the user that overriding has been authorized at open time but some operations using the relative key will fail if they are used because the record format is not F or FB Result This message is sent at OPEN time Execution proceeds but the program may abort if operations that are not permitted are used CBL13 ACCEPT program name console accepted string Meaning This message prints in the JOR the contents of a message received by the program from the main console or an alternate console as a result of an ACCEPT FROM ALTERNATE CONSOLE operation CBL14 IFN ifn ORGANIZATION OVERRIDEN Meaning The organizations found in the program and on the file were not identical Result This message is sent at OPEN time Execution proceeds 4 4 47 A2 10UJ CBL Messages CBL15 IFN ifn RECORD LENGTH CONFLICT ACCEPTED IN INPUT length ON FILE Meaning Warning message that indicates that the record lengths found in the program and in the file label are not equal The value found in the file label is given in the message This checking is done at OPEN time Result If the file was opened in input mode the execution usually proceeds When a record read in is greater than the record area the record is then truncated and the file status 9U is set The program aborts if no USE procedure was defined If the file was not opened in input mode the program will abort unless a USE procedure was defined to bypass the
299. aging is performed Result The file is in a coherent and stable state ifn UNSTABLE FILE FILCHECK IS TRIGGERED Meaning When the file was opened FILCHECK was activated to make it stable Result The file is in a coherent and stable state ifn END OF SALVAGING Meaning This is a warning message which may appear when a file is opened File salvaging is complete Result The file is stable and coherent ifn END OF FILCHECK Meaning This is a warning message FILCHECK processing is complete Result The file is stable and coherent ifn ONEWRITE SHARING NOT SUPPORTED ONLY DIR OR NORMAL ALLOWED IFN IFN Meaning The value of the SHARE parameter either in the ASSIGN JCL statement or in the catalog entry for the file is ONEWRITE This type of sharing is not allowed for libraries Result The file cannot be opened The return code SHCTVIOL is sent ifn NO MAXSIZE SUPPLIED COMPUTED ONE IS n Meaning At file allocation time INCRSIZE was specified but MAXSIZE was not A value has been computed by the access method Result The file can be extended up to the specified value ifn DIRECTORY FORMAT SWITCHING FOR FILE filename Meaning The directory for the file is in V1 V2 format 35 11 Messages and Return Codes Directory QL86 QL87 QL88 QL89 35 2 QLO1 35 12 IFN IFN IFN IFN Result It is automatically transformed into V3 format ifn UNEXPECTED DIRECTORY
300. ails are given by messages TD01 82 to 86 Action Correct the user program UNABLE TO CREATE SEGMENT Meaning The main segment record segment used for sorting cannot be created A return code from H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem UNABLE TO CREATE SEGMENT Meaning The common sort segment used for sorting cannot be created A return code from H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem UNABLE TO CREATE SEGMENT Meaning The generated code segment use for sorting cannot be created A return code from H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem UNABLE TO CREATE WORK FILE DEFINITION Meaning A dynamic FD file definition table is required and cannot be created A return code from H_CRFD is given It could be a linkage problem ENTRYOV UNABLE TO DELETE WORK FILE DEFINITION Meaning Sort is deleting useless FD file definition table The return code from H_DLFD is given Action Report the problem to Technical Support UNABLE TO IDENTIFY WORK F
301. al error NEEDS MORE THAN 12 SEGMENTS X4MB FOR BITMAPS Meaning Internal error ABNORMAL WORKFILE RWI SESSION CLOSE Return code Meaning Internal error ABNORMAL WORKFILE CLOSE Return code Meaning Internal error ABNORMAL WORKFILE DEALLOC Return code Meaning Internal error 12 13 Messages and Return Codes Directory DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 12 8 DU96 DU96 DU96 DU96 DU94 12 14 ABNORMAL WORKFILE H_DDASG Return code Meaning Internal error ABNORMAL WORKFILE H_DLFD Return code Meaning Internal error CLEAN SAVE DONE Meaning Clean of the server resources This is carried out at normal or abnormal end of save EXCEPTION IN MODULE H_DFSRD_SLAVE Action Indicate the module where the exception has arisen EXCEPTION IN DYNASAVE SERVER ROLLBACKED CI UNKNOWN IN CURRENT BITMAP CUR MAXCI lt UFAS NEXT CI ABNORMAL H_RFLDEF DELETE ALLOCATE BEFORE IMAGE OUT OF KNOWN SPACE UNKNOWN REQUEST NUMBER IN SLAVE INTERNAL ERROR Module H_Dfsrd_Spgim GIM CACHE BUFFERS SEGMENTS OVERFLOW gt 64 SEG Meaning Internal error ABNORMAL RC ON SEGMENT CREATE GIM4K SEGS Return code Meaning Internal error GIM CACHE TAIL LRU CICA BUSY Meaning Internal error ABNORMAL GIM CI POOL MANAGEMENT RWI CHECK ERROR H_RWWAIT Meaning Internal error 47 A2 10UJ DU Messages DU96 XFREECI NO BEFORE IMAGE FOR
302. al error in a job The file image to be restored is not relocatable or the input save file has an incorrect format Allocate the output file at the appropriate address or check the validity of the input save file User fatal error detected by IDS II access method 47 A2 10UJ UMOVLD UNBUNDL UNBVIOL UNDERLIM UNDRFLOW UNRECIO 47 A2 10UJ 0502 File or Device RESNAV to YETALLOC Return Codes User memory overloaded COBOL Status Key value 30 Create File Unsuccessful because of lack of memory Management Descriptions Job Management Memory Request Unsuccessful because of lack of memory Resource The user memory is overloaded so that there is Management insufficient memory to allow a step to increase its dynamic working set DWS or to allow a new step to begin executing The user must wait before starting a new step SORT MERGE The SORT memory size is too small Increase the SORT memory size If this occurs in a required memory SORT possibly replace it with a SORT having a disk work file System Nucleus Automatic There is no region available for the VMM Resource There are too many steps in the dimension with Manager the ICA attribute Use DDIM to determine the number of steps in the dimension then decrease the multiprogramming level MDDIM command VMM The main memory is overloaded Decrease the memory load by decreasing the multiprogramming level use the MDDIM command OAEO
303. al format of PT error messages is message text RC return code The format of PT error messages giving VCAM error codes for GCOS 7 V6 is message text VCAM ERROR CODES STATUS hhX REASON hhxX C_REASON hhxX The format of PT error messages giving VCAM error codes for releases prior to GCOS 7 V6 is message text VCAM ERROR CODES BYTE1 hhX BYTE2 hhxX BYTE3 hhx or message text VCAM ERROR CODES BYTE1 hhX BYTE2 hhX ERROR hhxX Where hh is a hexadecimal value For these messages refer to the VCAM error codes in this section Messages PTOI to PT26 are for initialization Messages PT31 to PT63 are for the dialog with VCAM 33 1 Messages and Return Codes Directory 33 1 PTO1 PTO2 PTO3 PTO4 PTO5 PTO6 PTO7 33 2 Initialization Messages PT01 To PT26 UNABLE TO OBTAIN VCAM SEMAPHORE RC return code Meaning Software error Action Contact the Service Center UNABLE TO ACTIVATE WORKSTATION VCAM ERROR CODES WSTAT wstat Meaning Software error Action Contact the Service Center UNABLE TO ACTIVATE MAILBOX VCAM ERROR CODES MBSTST mbstat Meaning Software error Action Contact the Service Center UNABLE TO OPEN REMOTE APPL MSG_GROUP VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Software error Action Refer to the VCAM error codes Contact the Service Center UNABLE TO DEACTIVATE MAILBOX VCAM ERROR CODES MBSTST mbstat Meaning Software error
304. alias names An incident occurred while deleting one of these names the name concerned being specified in the message The reason for the incident is given by the return code Result The compiler proceeds but the alias involved is not deleted from the library directory Further consequences can be e the error GPL22 in the same compilation when the compiler tries to add this name as an alias of the new CU e the return code ADDROUT at linkage time when this name is referenced Action Use the LIST command of the LIBMAINT CU to check the contents of the library If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary SOURCE MEMBER EMPTY member name Meaning The specified member given as input to the compiler does not contain any record Result If several compilations were requested the compiler proceeds to the next compilation Action Check the library contents PUT ON SYSOUT LNERR RC edited return code Meaning A record cannot be written in the standard SYSOUT due to a software problem Result The compiler proceeds but the current record is not stored in the report file Action Report the problem to the Service Center PUT ON PRTLIB LNERR RC edited return code Meaning A record cannot be written in the private SYSOUT specified in the PRTLIB or PRTFILE parameter of the JCL due to a software problem Result The compiler proceeds but
305. alling a mathematical function Mailbox saturated Read failure in macro processing abort the current running procedure Write failure in macro processing abort the current running procedure Media error The media specified for a multivolume file is non existent Specified volume non existent Internal error The mounted media does not allow the required function The maximum number of volumes for a file has been reached or the extension does not begin with the last volume of this file The specified media list is either not correctly sequenced or the last volume of the file has not been specified Error in media name or a file is supported by an incomplete list of media Check the media list given for the infile Media not assigned 53 9 Messages and Return Codes Directory MDNAV 53 10 0A03 BFAS Sequential Disk BFAS UFAS Tape Catalog Management MCS OMH Physical I O Access Internal RBF RWI TDS Unit Record Driver Media not available down or still used COBOL Status Key value 30 Any Operation WRITE SHIFT Main Console Management Various Operations Remote Writer OPEN or START Command READ OPEN WRITE A volume mounting or error recovery request has been rejected by the operator CANCEL REQUEST Request for mounting of work tape for dynamic file extension has been rejected by the operator Assign more private volumes for the
306. aloged file has been assigned but the SYS CATALOG does not exist DFDES 1 SCATVIOL A cataloged file has been assigned but the value given for the CATRANK parameter is incorrect or the parameter was not specified DFDES 1 SYSOV It is impossible to attach the file as there is an overflow in the catalog tables DFDES 4 ARGERR The primitive H_RTFILE has been used to retrieve a cataloged file description The file is a large magnetic tape file The value specified for the TENTH parameter is less than 1 or greater than 25 DFDES 4 ARVIOL Set in the following cases The caller requires a special interface but is not in ring 0 or ring 1 The issuer has incorrect access rights DFDES 4 CATERR An incorrect value has been specified for the CATRANK parameter less than 0 or greater than 5 DFDES 4 GENEMPTY The wrong generation has been specified 57 10 47 A2 10UJ DFDES 4 OBJUNKN DFDES 4 SCATUNKN DFDES 4 TRNMERR DFDES 5 GENEMPTY DFDES 5 SCATUNKN DFDES 32 BUSY DFDES 33 BUSY DFDES 34 BUSY DFDES 35 BUSY DFDES 36 BUSY DFDES 37 BUSY DFDES 38 BUSY File Management Return Codes in More Detail A file generation description has been requested and the catalog does not have one The primitive H_RTFILE has been used and the SITE CATALOG does not exist An absolute generation number has been specified as zero and several of these exist A request has been made to update a generation whic
307. anagement 1 When using the H_WAITSK customer 1867 1814 COBOL RTP CALL CANCEL Statements OMH Command Processing or Reply Processing System Nucleus VMM UFAS EXTENDED primitive or the H_WTPCS internal primitive either the primitive was executed in a subtask of the process group or the specified task waited for is the main task of the process group Check the activation context of the H_WAITSK primitive 2 When using the H_WAITSK customer primitive the end of the specified task occurrence is the main task of the process group Check the activation context of the H_WAITSK primitive 3 Attempt to initiate a task with the H_BEGTSK customer primitive or the H_INITSK internal primitive from a sub task of the process group Check the activation context of the H_BEGTSK primitive Intermediate delimiter error Identifier error The data name used to specify the program does not follow the syntax rules for a program name A parameter is invalid or an invalid message identifier has been specified An invalid object identification in the argument Contact the Service Center Two ifns given for the same efn have incompatible POOLIDs Modify these 1887 Unstable index 0A10 An entity is already assigned to the internal file name 0A11 A JCLDEFINE has already referenced the IFN 52 29 Messages and Return Codes Directory IFNERR 1821 Any File Organization GAC and GAC EXTENDED GTWriter Journalization
308. aning After a GCOS 7 clean restart some TDS system files may be inconsistent because TDS recovery procedures were not performed Action Run the TP7GEN utility Type of message Fatal Dump taken No Recipient of the message TDS Master 47 A2 10UJ MU and MV Messages MU91 XCP2 SERVICE UNAVAILABLE INTERNAL STATUS XXX XXX XXX XXX XXX Action Ensure that e an XCP2WKS was declared for the TDS application in the NETGEN service e the JPPC job is running e the XCP2 option was specified at preparation time Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU92 SYSTEM ERROR IN XCP2 SERVICE INTERNAL STATUS XXX XXX Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator MU93 ERROR ON SYSTEM FILE PROTECTION Action Ensure that the TDS system file CTLM is protected by the Before Journal Type of message Fatal Dump taken No Recipient of the message TDS Master MU94 SWAP FILE TOO BIG SWAP xx NOT USED Action Reduce the size of the swap files Try to balance the size of each swap file This message may appear several times with a different number of swap files Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU95 INCOMPLETE ROLLFORWARD RECOVER FILES PROTECTED WITH AFTER JOURNAL Action Perform the recovery procedure
309. aning An abnormal return code from H_SGSIZE is given when trying to identify a run time segment Possible user linkage error or the problem must be reported to Technical Support UNABLE TO CHANGE SEGMENT SIZE Meaning The segment for an old COBOL key comparison routine cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF ERROR IN COBOL COMPILER SORT INTERFACE Meaning Self explanatory Action Report the problem to Technical Support NO TAPE WORK FILE SUBROUTINE SORT AVAILABLE Meaning Self explanatory 47 A2 10UJ TDO1 22 TDO1 65 TDO1 66 TDO1 67 TDO1 68 TDO1 69 TDO1 70 TD01 71 TD01 72 TD01 73 TD01 74 TD01 75 47 A2 10UJ TD Messages Action Modify the JCL SORTWORK to supply a disk work file PARALLEL SORT IS NOT AVAILABLE IN TDS CONTEXT Meaning Self explanatory SRTDEF NO VALID KEY SPECIFICATION Action Correct the user program SRTDEF INVALID COBOL_COMP Action Correct the user program SRTDEF INVALID LOCAL PTR Action Correct the user program SRTDEF INVALID CODE_LENGTH Action Correct the user program SRTDEF ALL FILLER FIELDS ARE NOT 0 Action Correct the user program SRTDEF SIZE IS NEGATIVE Action Correct the user program SRTDEF NO_WORK_FILES MUST BE 1 TO 255 Action Correct the user program SRTDEF IN_VOLUME IS NEGATIVE Action Correct the user pro
310. ape on which there is a cataloged file If you want to use this volume you must first deallocate the file or re format the volume using VOLPREP File Space At least one file with the same name exists on Management the given media list or resident volumes but Utilities its status in the file label does not match the FILESTAT parameter Check the file status using FILLIST If necessary change the value of the FILESTAT or CATNOW parameter or reduce he media list using the MEDIA and DEVCLASS parameters OMH Cataloged Messages A catalog or a catalog pointer has been specified which is incorrect CATOV 1218 No more space in catalog Catalog Management CATALOG The catalog file is full perform extension by running CATEXTD utility 47 A2 10UJ 51 21 Messages and Return Codes Directory CCBRIL 2400 24FF Physical I O Access Internal CCBUFNAS 2000 20FF Physical I O Access Internal CCDADVL 2100 21FF Physical I O Access Internal CCFLGIL 2300 23FF Physical I O Access Internal CCFMVL 2200 22FF Physical I O Access Internal CCILLEG 2600 26FF Physical I O Access Internal CCNUMIL 2500 25FF CDATANOV 1A77 CDATNHOV 1A7A 51 22 Various Operations Various Operations Various Operations Various Operations Various Operations Various Operations Invalid branch address There is an invalid CCE branch address The address of a branch Channel Command entry is illega
311. aracteristics Wrong value specified in input parameters Wrong parameters specified for a command An unexpected parameter or an incorrect parameter number has been specified Verify these An error has occurred when parameter values were being passed between another system component and GAC The user can do nothing In TDS mode reinitialization takes place An incorrect argument has been specified for the called function Verify the arguments User error in field s of the input structure of the invoked primitive No action is performed Wrong parameter specified when using RMS facilities 47 A2 10UJ 47 A2 10UJ Job Management Journalization Network Generation OMH Pascal RTP PCF Services SORT MERGE System Nucleus ABNCCAD to DATALOSS Return Codes Load Module 1 Error in patch record Internal error Loader 2 The wrong parameters were given to the procedure during the loading of the step Modify the parameters 1 Parameter error while initializing a TDS step 2 File incorrectly described during an OPEN of a journal file Send the PRLOG log to the Service Center System error Contact the Service Center Message Catalogued messages a pointer to a variable Management field is missing or the initialization of the variable field does not match its definition in the catalog A character field is binary Correct the argument An input parameter has been specified incorrectly A
312. as been specified for a dynamic define which has already been defined DFASG 19 OPEN An ifn has been specified for a dynamic define and the corresponding efn is already open DFASG 20 OPEN A dynamic deassign has been attempted on a file which is still open DFASG 21 ARVIOL A dynamic assign has been attempted from a caller who is not in ring 0 or ring 1 and ACCESS EXECUTE DFASG 22 ALMOST The referenced SFN has already been consigned DFASG 24 SEQERR Indicates that before consigning the SFN a check was made which revealed the file to be open already DFASG 40 BUSY Exclusive access to the process group has been requested and the file is already assigned to the requestor DFASG 41 BUSY As above but the file is already assigned to another process group DFASG 42 BUSY A process group has requested exclusive access to a file which is already being accessed exclusively by another process group DFASG 43 BUSY The file is already assigned to the process group but another process group has asked for the same file to be allocated DFASG 45 BUSY The number of subfiles which may be assigned has been exceeded DFASG 46 BUSY A process group has attempted to access a file which is already being accessed by another process group but the second process group has specified a different device name DFASG 47 BUSY Two process groups are trying to share the same file but one process group has specified NOVOLWRITE and the other h
313. as specified VOLWRITE DFASG 48 BUSY Two process groups are trying to share the same file but the values specified for the SHARE parameter are incompatible DFASG 49 BUSY Inter process group sharing is incompatible DFASG 50 BUSY A process group has attempted to access a file with ACCESS ALLREAD while other process groups are writing to the file 57 8 47 A2 10UJ DFASG 51 BUSY DFASG 52 BUSY DFASG 53 BUSY DFASG 55 BUSY DFASG 56 BUSY DFASG 57 BUSY DFASG 58 BUSY DFASG 59 BUSY DFASG 60 BUSY DFASG 61 BUSY File Management Return Codes in More Detail A process group has attempted to access a file with ACCESS WRITE while the other process groups accessing the file are in ALLREAD mode A process group has attempted to access a file with ACCESS ALLREAD while the other process groups accessing the file have a catalog attached The maximum number of jobs that can share a file has been reached There is a conflict with inter system sharing There is an overflow in the knot table There are no more type 0 vacant entries or semaphores There is an overflow in the table of attached catalogs A file has been passed by another process group and the value of the SHARE parameter of the assign is incompatible A file has been passed by another process group but the assign cannot be performed in passing mode An attempt has been made to assign an auto attachable cataloged file and the volu
314. at belong to him her Who receives the message The submitter of a frozen report or the owner of the destination terminal of a frozen report TW28 TWRITER TERMINATED BY SHUTDOWN Meaning This message is sent in case a END SYSTEM command has been issued Who receives the message The TWCOMMSUB 47 A2 10UJ 46 11 Messages and Return Codes Directory TW29 TW29 TW31 TW31 TW32 TW34 TW35 46 12 UNKNOWN DRIVER Meaning GT Writer cannot find the Driver to launch Who receives the message The TWCOMMSUB lt command gt UNKNOWN DRIVER Meaning The Driver is unknown to GT Writer Who receives the message The COMMANDSUB DRIVER lt driver gt STARTED Meaning The Driver is started and ready to process outputs Who receives the message The TWCOMMSUB MTO NOT PERFORMED FOR lt Rxxxx gt Meaning The re direction of an output toward a system printer has failed Who receives the message The COMMANDSUB STW NOT PERFORMED FOR lt driver gt Meaning The launching of the driver has failed Who receives the message The COMMANDSUB lt command gt UNKNOWN STATION Meaning The station required for re direction of output s is not known to GTWriter Who receives the message The COMMANDSUB MTO PERFORMED FOR lt Rxxxx gt DEST lt station gt Meaning The report is re directed It is now an output for the Command Handler H_TWCOMM Who receives the message The COMMANDSUB COMMAND HANDL
315. atic allocation in the following cases The file has already been assigned as a cataloged file without the CATNOW parameter being specified The maximum number of ifns has been reached for this process group During the deassign of a dual shared non resident file the list of corresponding volumes is empty The maximum number of static defines has been reached 57 5 Messages and Return Codes Directory DFASG 9 CONFLICT Set in the following cases The maximum number of static defines has been reached This ifn has already been defined Overriding the journal options is forbidden without having the RECOVERY access right DFASG 10 FLABUNKN During a warm restart a dual shared non resident file is being deassigned and the list of corresponding volumes is empty DFASG 16 FLABUNKN At job termination an attempt has been made to suppress file passing for a dualshared non resident file and the list of corresponding volumes is empty DFASG 17 FILENASG The ifn is not assigned DFASG 18 ALMOST A dynamic assign has been attempted with the NOWAIT option and the referenced volumes are not mounted 57 6 47 A2 10UJ 47 A2 10UJ DFASG 18 CONFLICT DFASG 18 OPEN File Management Return Codes in More Detail Set during a dynamic assign in the following cases A non resident file was assigned and the volume number was specified as less than 1 or greater than 10 A non resident file wa
316. atic migration in operation was too long Use the DISPLAY ARS command to check the TIMEOUT value of the ARS configuration parameter See the ASM 7 File Migration Administrator s Guide Hardware problem Check console or contact the Service Center Timeout console and user recovery requested DPS6 takes too much time to answer The system assumes it is down Task Management The CPTIME limit specified in the STEP JCL XCP2 H_MCSEND command has been reached Ensure that the program does not make a loop then increase the CPTIME value in the STEP JCL command Too long a wait for a TDS XCP2 verb Refer to the CPI C XCP2 User s Guide V O Watchdog limit exceeded The input or output request termination was not received by GCOS within 20 seconds Subsequent retries result in a return code of DVNAV device not available In BSC only Too much time has been taken by the application to send the next block of a file Resynchronization is needed 47 A2 10UJ RESNAV to YETALLOC Return Codes TMLIM 0023 A time value specified in the request has been forced to the authorized limit TMPTYLIM 0023 0024 Time and priority values specified in the request have TMRNAV OAOC TMRVIOL 1402 TOIDC 1E41 TOIDE 1E42 TONID 1E40 TOOLATE 0400 Network Generation OMH TPUNKN 100E IDS Journalization OMH 47 A2 10UJ Message Management Various Operations Cataloged Messages been forced to
317. b should contact the operator to decide what to do about the current step Refer to the questions asked in messages JP31 and JP32 Journalization cannot start before answering the question Destination of the message The person who submitted the job or the JOR 47 A2 10UJ JP34 JP34 JP36 JP37 47 A2 10UJ JP Messages jasname PREDATING OR POSTDATING HAS OCCURRED STEP ABORTED BY OPERATOR 01 jasname PREDATING HAS OCCURRED JOURNALIZATION FORCED BY OPERATOR FUTURE ROLLFORWARDS ARE NOT GUARANTEED 02 Meaning Message 01 The operator answered NO to question JP31 or JP32 Message 02 The operator answered YES to question JP31 Action None Destination of the message Submitter of the job or the JOR of the current step jasname efn THE DATE OF THIS SAVE HAS NOT BEEN RECORDED IN THE JAS FOR SECURITY AND PROTECTION PURPOSE THE PRIVATE CATALOG OF THIS FILE MUST BE ATTACHED WITHOUT DEVCLASS MEDIA SPECIFICATION Meaning The file being saved is cataloged in a private catalog There is already a journalized file which has the same file and catalog name Since the rules for journalization and FILSAVE are not respected the system cannot determine whether the file being saved is the one already known to the JAS jasname The save date is not recorded in the jasname After Journal so e no automatic cycling is performed for the journal files e the oldest save date known by the jasname A
318. be declared in application list in the project of the user for whom the TX is to be running See CPI C XCP2 User s Guide paragraph Authority Codes Checking CANNOT ALLOCATE SESSION ENTRY CC 17 internal error TDS table entry creation is not possible CANNOT ALLOCATE TRANSACTION PHASE ENTRY CC 17 internal error TDS table entry creation is not possible CANNOT ALLOCATE COMMIT ENTRY CC 17 internal error TDS table entry creation is not possible TERMINATE TDS IN PROGRESS CC 16 TTDS weak or strong has been issued TRUNC FROM H_PPC_GET_TX CC 6 internal error length or number of TIPs Transaction Input Parameters is not correct TPNAME gt 8 CC 9 transaction name exceeds 8 characters TPNAME NOT FOUND IN TX TABLE 47 13 Messages and Return Codes Directory CC 9 TX NOT USABLE FOR XCP2 CC 4 generation clause XCP2 SERVICE USED missing for the invoked transaction INVALID PARTNER FROM H_PPC_DISPL_ COR CC 2 internal error Action For internal error contact your supplier otherwise modify the application TX99 cmdnm POOLREQ REFUSED POOL poolnm RC rce RS reason CC cpicode TXT text This message is sent to the master when a problem occurs during the processing of a remote pool request reason is an internal error number cplcode is the requested function CC 0 for OPENING the POOL OCPOOL command CC 1 for MODIFYING the POOL MDCPOOL command CC 2 for CLOSING the POOL
319. be locked between the systems Result System error during use of coupled system Action Contact the Service Center CANNOT BE UNLOCKED RC edited return code Meaning System error during use of coupled system Action Contact the Service Center ifn FILE BELONGS TO A SEARCH PATH EXCLUSIVE ACCESS FORBIDDEN Meaning Issued during an ASSIGN with exclusive access requested on a file already CONSIGNED that is to say already referenced through MWLIB or MWINLIB Result Error detected at step initiation time the step cannot be started Action Check JCL 47 A2 10UJ DF62 47 A2 10UJ DF Messages EFN efn IFN ifn ASSIGN CONFLICTS WITH PREVIOUS ONE FOR THE SAME FILE Meaning Issued during an ASSIGN on a file already assigned in the same step or passed by a preceding step of the same JOB and with ASSIGN performed with parameters incompatible with current ones Result Error detected at step initiation time The step cannot be started Action Check JCL at step and JOB level 10 9 Messages and Return Codes Directory 10 10 47 A2 10UJ DS02 47 A2 10UJ 11 DS Messages General Environment DS messages are produced by the part of File Management that checks the consistency of the external file description during the File Assignment phase When the file is cataloged the catalogs are accessed and various checks are performed The external file name o
320. been declared unavailable by the system cartridge library only The media is not in the library 56 1 Messages and Return Codes Directory 56 2 DVMGT 6 DVNAV DVMGT 6 INVUSE DVMGT 7 TRUNC DVMGT 9 IGNORE DVMGT 9 NOWAIT DVMGT 10 RSUNKN DVMGT 11 ARGERR DVMGT 11 BUSY DVMGT 11 WRONGDV The requested Dynamic Drive Reconfiguration applies to cartridges only is not possible There is only one device in the configuration The requested Dynamic Drive Reconfiguration applies to cartridges only is not possible The cartridge is in a cartridge library or must be mounted on a given device Normal return code The information returned about a pool of devices is incomplete The number of devices is greater than the number specified Normal return code when an AVR has not been issued after a device state change Controller recovery while an AVR is running No error the requested volume has not been found in the given system tables System or user error while checking if a volume is known to the system No device type is given The device type is not a disk diskette tape nor cartridge No device attributes are given for disks A device name is given Incomplete device attributes for a cartridge on multi model sites model name is missing For a non removable disk both the volume name and the device name have been given The supplied volume name is already in use
321. bers that allow precise file identification TBL NE Error number Return code Meaning Action 44 9 4012 1 2 h_ddasg RC 4012 3 4 h_open RC objtperr 4012 5 6 h get RC 4012 7 8 h put RC 4012 9 10 h putx RC 4012 11 12 h close RC 4012 13 14 h_dflasg RC 4012 15 16 h_open RC 4012 17 18 OBJTPERR 4012 19 20 OBJTPERR 4012 21 22 RECNFD 4012 23 24 OBJTPERR 4012 25 26 h get RC 4012 27 28 OBJTPERR 4012 29 30 RECNFD 4012 31 32 OBJTPERR TBL NE 4012 33 34 RECNFD 4012 35 36 OBJTPERR Messages and Return Codes Directory System trace collector file dynamic deassign error following an incorrect file access initialization System trace collector file exclusive access open error or incorrect output file recsize cisize System trace collector file first record read error System trace collector file first record initialization error System trace collector file first record rewrite error System trace collector file close deassign error System trace collector file dynamic assign error System trace collector file second open error System trace collector file control record structure error Verify file name or clear file area to continue System trace collector file second record structure error Verify file name or clear file area to continue System trace collector file control record structure error Verify file name or clear file area to continue System trace collector file control record struct
322. bject is different from the schema name of the loaded schema object Action Check that the subschema has been translated or validated against the referenced and loaded schema DDM00405 lt error localization gt UNEXPECTED RETURN CODE WHEN OPENING IDSOPT RC edited return code Meaning IDS failed to open the file containing run time options the reason is given by the return code This message may indicate a system error However return code EFNUNKN indicates that the user private file specified in the JCL statement ASSIGN IDSOPT does not exist on the specified volume Result In a Batch environment the step execution is aborted Action Check the JCL statement ASSIGN IDSOPT contact the Service Center if necessary DDM00406 lt error localization gt IDSOPT DATA TYPE MUST BE DATA OR DATASSF Meaning The type of source data for run time options commands specified either in the JCL statement INPUT in case of an input enclosure or at member creation time when the run time options are found in a member of a library is different from DATA or DATASSF Result In a Batch environment the step execution is aborted Action Check the JCL statement INPUT or modify the type of library member using the LIBMAINT MOVE command DDM00407 lt error localization gt IDSOPT SUBFILE IS UNKNOWN Meaning The member specified in the JCL statement ASSIGN IDSOPT which would contain the IDS run time options does not exist in the sp
323. ble DFPRE 25 EXTERR The specified extent does not exist DFPRE 25 FUNCNAV The specified media is not a VBO media DFPRE 25 MDERR The specified media does not exist DFPRE 25 NOTOPEN The specified ifn is not open DFPRE 25 NOWAIT The extent is in an unstable state DFPRE 25 OPTERR Invalid input media address format DFPRE 26 CONFLICT It is impossible to restart the ifn processing DFPRE 26 IOFAIL An I O error has occurred on a system file DFPRE 26 MDERR It is impossible to retrieve the specified media DFPRE 27 CONFLICT An attempt has been made to write to a file on tape protected by a ring DFPRE 27 FLABUNKN The file label was not found on the specified volumes DFPRE 27 INVUSE Set in the following case IDRC status detected on a media mounted on a non IDRC cartridge drive DFPRE 27 MDERR Set in the following cases End of file not found on media list During output processing the header labels were unable to be written For a long cataloged tape file the next media tenth cannot be retrieved by the catalog The media list for a diskette file is inconsistent blank volume sequence numbers are mixed with non blank volume sequence numbers When a diskette file is being concatenated using the NBEFN specified for the assign the first occurrence of the file is missing DFPRE 27 OPTERR An option reserved for a different device was used DFPRE 28 SPACENAV No space has been allocated for a diskette file 57 20 4
324. ble number of units has been created In deallocation mode there is no empty buffer to delete Contact the Service Center The structure of the DPAN file is incorrect Reassign the file The specified request cannot be performed as a Display resource is unavailable GCL This is a warning indicating that the resource requested is not available Journalization Resource not available in the journal tables OMH Command The process group specified as being in charge Processing of the command is not available Physical I O Access The resource is not available The specified I O device is not in the configuration RBF Station Site or device not attached to the station Management System Nucleus Dynamic Resource not available A mandatory sharable Addresser module was not found in the SYS SYSTEM file Modify the system generation parameters TDS Any TPR A TPR abort has occurred as a result of a crash Operation or the resource handling rules have been violated UFAS EXTENDED Resource not available Contact the Service Center VCAM Any Operation The requested action has not been performed due to a lack of system resources Try again later OOBE The item is a resource item 1623 Attempt to access an unassigned resource GTWriter SET NOT CONCURRENT not done for the calling TPR TDS TPR Operation Resource handling violation FREE SAVE COMMON function performed without TAKE COMMON or violation of programming rules in transaction for i
325. block transfer operation refused following a partial transfer truncated because end of volume or file was reached The request must be resubmitted with a smaller number of blocks Tabulation expansion would cause overflow on output string therefore truncation has occurred The length of a received record exceeds the conversation buffer size Refer to the CPI C XCP2 User s Guide The communication area in RFLDEF override is too small Block being read has been truncated to the length specified in BLKSIZE If non standard tape check block length A line has been truncated DOF mode message Task unknown Task does not belong to the process group 1 The task name specified in the H_BEGTSK external primitive or in the H_INITSK internal primitive is invalid it is not known in the current process group Check the activation context of the H_BEGTSK primitive 2 The value of the OCCUR argument in the H_ABTSK external primitive is invalid it is a negative value or a value greater than the number of occurrences of the task 3 The value of the OCCUR argument in the H_WAITTSK external primitive is invalid it is a negative value or a value greater than the number of occurrences of the task Check the activation context of the H_WAITTSK primitive 4 The task name specified in the H_BEGTSK the H_ABTSK or the H_WAITSK external primitive does not correspond to a task known in the process group Entity type erroneous
326. bschema name SCHEMA schema name HAS BEEN FOUND IN SEARCH PATH Meaning At schema subschema loading time IDS did not find the requested object schema subschema in the libraries specified in the ASSIGN statements of DDLIBi Result In a Batch environment the step execution is aborted Action Check the ASSIGN statements of DDLIBi DDM00393 lt error localization gt NO SUBSCHEMA subschema name SCHEMA schema name HAS BEEN FOUND IN LIBRARY ASSIGNED TO EFN efn Meaning At schema subschema loading time IDS did not find the requested object schema subschema in the library specified in the JCL statement ASSIGN area efn Result In a Batch IOF environment the step execution is aborted Action Check the JCL statement ASSIGN area efn DDM00394 lt error localization gt SUBSCHEMA subschema name SCHEMA schema name IN LIBRARY ASSIGNED TO IFN DDLIBi IS IN TRANSIENT STATE THEREFORE UNAVAILABLE Meaning The object schema subschema specified is in a transient state thus unavailable Result In a Batch environment the step execution is aborted Action Schema subschema description must be performed again 47 A2 10UJ 47 A2 10UJ DDM Messages DDM00395 lt error localization gt DD OBJECT member name IN LIBRARY OF EFN efn IS NOT A SCHEMA SUBSCHEMA Meaning The object found in the specified library does not correspond to an object schema subschema It may be a REORG object Result In a
327. cannot be executed due to lack of space in the TDS Tables or in the SWAP file or due to the fact that the TDS has been generated with a single level of simultaneity or if there is no simultaneity left to execute the transaction Action Restart TDS in WARM mode txname MUST BE DECLARED RPC TO USE RPC SERVICES TPR tprname Meaning The transaction does not specify RPC SERVICE USED but one of its TPRs has attempted to run an RPC service while running on a non RPC process The transaction then aborts with the following message that appears on the screen and also in the JOR ABORT X xXxX XXxXxX RC xxxx1463 gt TP7 X PMDVIOL tprnm Action Specify the RPC SERVICE USED Clause in the MESSAGE Statement of the Transaction Section and rerun TP7GEN 29 29 Messages and Return Codes Directory MV37 MV37 MV37 MV38 29 30 CNCT DEBUG FROM XXXXXXXX C 000 ST 00X R 000X Meaning This version of the MV37 message applies to Technical Statuses before TS7356 MDTDS TRACE 02 The XXXXXXXX value is CONNECT or CPCNCT to identify the TDS procedure C is the decimal value of an internal error code if not zero ST is the VCAM status hexadecimal R is the VCAM reason hexadecimal Action This information is used by your Customer Service Center To de activate this message enter the command MDTDS TRACE 00 CNCT DBG ZZZZZZZZZZZZ gt gt V YYYYYY I CCC S XXXX HEXA REASON RRRR HEXA or
328. cases this is an internal error 47 A2 10UJ 29 3 Messages and Return Codes Directory MU11 MU12 MU13 MU14 MU15 29 4 Action Remove this JCL statement and restart the TDS application Type of message Fatal Dump taken Yes ILLEGAL TYPE OF RECORD Action None internal error Type of message Warning Dump taken Yes Recipient of the message TDS Master UNABLE TO OPEN SYSOUT Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator UNSUCCESSFUL WRITE ON AFTER JOURNAL Action None internal error Type of message Fatal Dump taken No Recipient of the message Main Operator UNABLE TO OPEN BEFORE JOURNAL Action None internal error Type of message Fatal Dump taken No Recipient of the message Main Operator UNABLE TO INITIALIZE AFTER JOURNAL FOR USER JOURNAL USE Action None internal error Type of message Fatal Dump taken No 47 A2 10UJ MU and MV Messages Recipient of the message Main Operator MU16 MASTER MAILBOX NOT OPENED Action Ensure that the master mailbox name is cataloged in the APPLIST parameter of the SITE CATALOG Type of message Fatal Dump taken No Recipient of the message Main Operator MU17 TDS MAILBOX NOT OPENED Action Ensure that the tdsname is cataloged in the APPLIST parameter of the SITE CATALOG Type of mess
329. ck list needed by a Commitment Unit to run correctly This information is given only when GAC has had to increase the NUMLOCK value for Commitment Unit n The message means that the user has selected a value for NUMLOCK which is too low for the Commitment Unit Result GAC increases the value of NUMLOCK for Commitment Unit n ifn LOCKMARK OPTION NOT ALLOWED OR BEFORE JOURNAL MISSING Meaning An attempt has been made to specify the LOCKMARK option for an IDS II or an TDS file or a Batch file cannot be opened as the Before Journal is missing Result The program will be aborted Action Correct the code or specify the Before Journal ACCESS MUST BE SPREAD OR SPWRITE WITH DEFERRED UPDATES Meaning A program under TDS has been assigned with SHARE MONITOR and with an access mode which authorizes sharing i e not SPREAD or SPWRITE Only deferred update protection has been requested Result When an attempt is made to access the program it will be aborted Action Specify the Before Journal or assign the file in exclusive mode ifn REPEAT OPTION MISSING Meaning For Batch steps to be able to lock files using GAC the REPEAT option must be specified This was not done Result GAC will not be able to be restarted after a deadlock Action Specify the REPEAT option ifn MONITORED FILE IN TDS MUST BE CONTROLLED Meaning A file which is non TDS controlled has been assigned with SHARE MONITOR Result The operation which you
330. containing an object schema has been found in the JCL Result In a Batch environment the step execution is aborted Action Provide an ASSIGN statement to ifn DDLIBi defining the library where the object schema is to be found in the JCL DDM00386 lt error localization gt NO FILE IS ASSIGNED TO IEN ifn Meaning The library where the object schema is to be found has been specified in IDS run time options by its internal file name DDLIBi but there does not exist in the JCL an ASSIGN statement with that ifn Result In a Batch environment the step execution is aborted Action Provide the corresponding ASSIGN statement in the JCL 9 6 47 A2 10UJ DDM Messages DDM00387 lt error localization gt NO LIBRARY OF EFN efn IS ASSIGNED TO IFN S DDLIB1 DDLIB2 DDLIB3 Meaning The library where the object schema is to be found has been specified in IDS run time options through its external file name but there does not exist in the JCL an ASSIGN statement of ifn DDLIBi which refers to the external file specified in run time options Result In a Batch environment the step execution is aborted Action Check the JCL against the run time options DDM00388 lt error localization gt EFN ASSIGNED TO IFN DDLIBi IS UNKNOWN Meaning A JCL statement ASSIGN defining a library where the object schema is to be searched ifn DDLIBi specified a file which does not exist Result In a Batch environment the ste
331. cord Controller Initialization TBL NE VCAM Virtual Communications Access Method VFU Vertical Format Unit VMA Virtual Memory Access VMF Virtual Memory File VMM Virtual Memory Management VSN Volume Serial Number VTOC Volume Table of Contents XCP Transactional Communication Protocol XUFAS Extended Unified File Access System 50 9 Messages and Return Codes Directory 50 4 Organization Of The Return Code Explanations The return codes explained in the following sections appear in alphabetical order of the return code s name mnemonic code The return code s name is followed by its associated hexadecimal value This is followed by a generic explanation of the return code Where appropriate the line below gives the associated COBOL Status Key value Here is how the return codes are presented RETURN CODE Hexadecimal value Generic explanation 50 5 50 10 COBOL Status Key value If a return code is explained in more detail for a particular system component this information is given after the generic explanation There are three columns of information as follows TBL NI System Component Operation Explanation or Cause The first column System Component gives the name of a system component or utility program from which a return code may have originated for example TDS File Management Unit Record Driver BFAS Sequential Disk File Handling If you want more information about a particular
332. ct report the problem to Technical Support UNABLE TO CLOSE INPUT FILE Action Report the problem to Technical Support 42 27 Messages and Return Codes Directory TD23 01 TD23 02 TD23 03 TD23 04 TD23 05 TD23 06 TD25 01 TD25 02 TD25 03 TD26 01 42 28 UNABLE TO OPEN OUTPUT FILE Action Check file labels characteristics assignment If they are correct the problem must be reported to Technical Support UNABLE TO PUT RECORD BLOCK ON OUTPUT FILE Action Check file labels characteristics assignment If they are correct the problem must be reported to Technical Support UNABLE TO RETRIEVE GETCI CHECKCI ADDRESS FOR OUTPUT FILE Action Check file labels characteristics assignment If they are correct the problem must be reported to Technical Support OUTPUT FILE OVERFLOW Meaning Either the output file is actually too small or some incorrect parameter e g output record or block size implies an abnormal output file occupancy e g one record per block INVALID INPUT FILE PARAMETER FILEFORM OR RECFORM Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO PUT RECORD BLOCK ON OUTPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support CHECKPOINT ERROR Meaning The checkpoint conditions are probably not satisfied Action Correct th
333. ct the Service Center MAC18 PUT ON PRTLIB RC edited_return_code Meaning MACPROC was unable to write a record to the report library specified by the PRTLIB parameter The return code indicates the reason The return code DATALIM means that the library is full and cannot be extended Result Processing stops A partial listing of the source currently being processed may be accessible Messages in the JOR indicate which units have been processed Action If the incident was an I O error check the disk and the disk pack supporting the file If necessary contact the Service Center MAC19 PUT ON PRTFILE RC edited_return_code Meaning MACPROC was unable to write a record to the report file specified by the PRTFILE parameter The return code indicates the reason The return code DATALIM means that the file is full Result Processing stops A partial listing of the source currently being processed may be accessible Messages in the JOR indicate which units have been processed Action If the incident was an I O error check the disk and the disk pack supporting the file If necessary contact the Service Center 47 A2 10UJ 28 5 Messages and Return Codes Directory MAC20 MAC21 MAC22 MAC23 MAC24 28 6 VMM FAIL VMFOP RC edited_return_code Meaning There is a problem with the management of the Virtual Memory File used by MACPROC The return code indicates the reason Such a message indicates a system
334. d The old output member of the current input unit if any and any output members which have already been processed may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC44 PUT ON OUTFILE RC edited_return_code Meaning MACPROC was unable to write a record to the output file specified by the OUTFILE parameter The return code indicates the reason The return code DATALIM means that the file is full Result Processing stops Messages in the JOR indicate which units have been processed The output file is incomplete Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC45 MAXIMUM NUMBER OF ERROR DIAGNOSTICS HAS BEEN DETECTED TRY WITH NOBSERV OR NWARN OPTION Meaning MACPROC stops when 5000 error diagnostics have been detected Result Processing of the current unit stops and processing of the next unit if any starts Action Correct the input source or if many errors have severity or 2 try using the NOBSERV and or NWARN options MAC46 OPENS PRTLIB FOR input_unit name J RC edited return_code Meaning MACPROC was unable to create or replace a member in the report library specified by the PRTLIB parameter The return code indicates the reason Such an incident may be due to a system error Result Processing stops Messages in
335. d The search continues on the next volume FP35 SYSTEM I O ERROR IN RLSPACE FOR IFN ifn Meaning When releasing space belonging to the file indicated in the message the system was unable to access the system file SYS KNODET Result An abnormal return code is returned to the program Action Contact the Service Center BLOCKS FP36 REQUESTED SPACE HAS BEEN DEALLOCATED NEW SIZE size TRACKS CYLINDERS Meaning This is an information message indicating that the file s space has been reduced The new size of the file is given in the message Result Execution proceeds Action None 17 8 47 A2 10UJ FP38 FP39 FP40 FP49 FP50 FP51 47 A2 10UJ FP Messages ALL SPACE HAS BEEN DEALLOCATED ON VOLUME volname FOR IFN ifn EFN efn Meaning This is an information message indicating that there is no longer any space allocated to the specified file on the specified volume Result Execution proceeds Action None SPACE CANNOT BE ALLOCATED BLOCKSIZE MUST BE LOWER THAN 32 KBYTES FOR IFNNN ifn EFN efn Meaning The specified blocksize or CISIZE for a UFAS file is greater than 32 kbytes The space cannot be allocated Result The BLKSZERR return code is sent Action Modify the BLOCKSIZE or CISIZE parameter for file allocation ABNORMAL EVENT DURING H_CLOSE FOR IFN ifn EFN efn Meaning The corresponding device to the efn is not ina READY state The step is in abort phase
336. d DEFINE with JOURNAL AFTER or BOTH If at least one file needed by the step is protected by the Before Journal it must e either be statically assigned and cataloged with JOURNAL BEFORE or BOTH e or include the JCL command DEFINE with JOURNAL BEFORE or BOTH Action 02 Create SYS JAS If JP41 was printed at system restart make the SYS JAS Directory available and activate JRU 47 A2 10UJ JP56 JP57 JP61 JP62 JP63 47 A2 10UJ JP Messages OPEN REJECTED FOR efn USER FILE BECAUSE ITS CATALOG FILE IS LINKED TO A PRIVATE JAS AND HAS NOT AUTO ATTACH OPTION Meaning The step has attempted to open a user file whose catalog is linked to a non HA private JAS and which is not auto attachable Action Make the catalog auto attachable before reopening the file OPEN REJECTED FOR efn USER FILE PROTECTED BY jasname JAS ONLY SYS JAS IS SUPPORTED ON THIS SYSTEM Meaning An attempt is made to open a user file whose catalog is linked to a non HA Private JAS when the marketing identifiers 3JAS or HA have not been installed Action Link the catalog of the user file to SYS JAS through the LINK command of MNJAS or install a marketing identifier that allows the use of a Private JAS jasname DYNAMIC ROLLFORWARD NOT SUCCESSFUL FOR ron Meaning This message is sent when a TDS is rolled forward dynamically e either at TDS abort e or at system restart See JP63 JP64 JP65 or JP66 Some user files usi
337. d Return Codes Directory 47 A2 10UJ 8 DCT Messages General Environment DCT messages are produced by the catalog utilities Messages DCT01 to DCT21 may appear during the execution of any utility the others are specific to a utility Most of the messages begin with the name of the object involved This can be a file name a directory name a catalog name etc Pertinent Manuals Catalog Management User s Guide c cccccccccccccesscecetecetesetetseeseeeessenseenaes 47 A2 35UF Message descriptions DCT01 utility name UTILITY ABNORMALLY TERMINATED RC edited return code Meaning An error caused the utility to abort The return code gives the reason for the abort but preceding information usually gives more details of the error detected Result The utility is not performed Action Check the return code and preceding information and rectify the error DCT02 REQUESTED SPACE NOT AVAILABLE Meaning A catalog file creation CATBUILD or catalog file extension CATEXTD is to be performed but there is not enough space available on the volume involved to create or extend the catalog file to hold all the objects specified in the NBOBJECT parameter Result The utility is not performed Action Create a new catalog on another media In the case of CATEXTD use the CATMOVE utility to move the contents of the old catalog into the new catalog Then delete the new catalog 47 A2 10UJ 8 1 Me
338. d TDS Master NO MORE SUBFILES AVAILABLE IN DEBUG FILE FOR PRINT OPTION Meaning There are too many subfiles being used with the trace mechanism The limit is 100 subfiles Action Reduce the number of subfiles Type of message Warning Dump taken No Recipient of the message TDS Master NO MORE SUBFILES AVAILABLE IN DEBUG FILE FOR PCF OPTION Meaning There are too many subfiles being used with the trace mechanism The limit is 100 subfiles Action Reduce the number of subfiles Type of message Warning Dump taken No Recipient of the message TDS Master TDS WARM COLD RESTART TS xxxx Meaning This message appears only in the JOR and indicates at what time the TDS application started and the current Technical Status xxxx Type of message Warning Dump taken No GAC INITIALIZATION FAILED Meaning The TDS application cannot start Action Consult the Service Center Type of message Fatal Dump taken Yes 47 A2 10UJ Mv10 MV11 MV12 MV13 Mv14 Mv1i5 MV16 MV17 47 A2 10UJ MU and MV Messages Recipient of the message TDS Master JOURNAL INITIALIZATION FAILED Meaning An internal error prevents the TDS application from starting Action Consult the Service Center Type of message Fatal Dump taken No Recipient of the message Main Operator ERROR WHILE WRITING TO SECURITY LOG FILE Meaning An internal error occurs while TDS is
339. d access level 2 Relocation mode denied 3 ERROPT value denied 4 PMD IO and DKTT required LOCATE not allowed in HPL DOF data format not allowed in HPL No more file volumes remain the entire list of volumes containing the file has been communicated to the user TPR Operation Transaction XCP2 UFAS and UFAS DELETE EXTENDED START Sequential Disk UFAS and UFAS General EXTENDED Unit Record Driver OPEN Diskette Unit Record Driver OPEN Printer FVLIM 00E3 FVNOTCUR 1C0E FWNAV 0A01 Job Management Load Module Loader UFAS OPEN System Nucleus Loader GENEMPTY 00E2 Catalogued Files Assignment Network Generation 52 26 File volume is not current Firmware function not available The step has not been loaded as one or more of its Compile Units are not compatible Compile the step again with the option CODE OBJCD and then re link with either the option CODE OBJCD all Compile Units which are not compatible will be excluded or the option CODE ANY all Compile Units are included This latter option may lead to erroneous results Violation of sharing rules The load module is incompatible with the hardware Compile and link again Generation not yet created Specified generation is empty Check JCL Incremental generation has failed because the directory is empty run the CRNETGEN utility 47 A2 10UJ GENNAV GEXTUNKN H200CN H200CNO H200CN1 H200CN2 H200CN3 H200CN4
340. d as migrated out Le transferred from on line disk to secondary storage media tape cartridge etc The automatic migration in operation is not performed because automatic migration in operating mode is not selected use the DISPLAY ARS command to check ARS configuration parameters the migration in operation was aborted check the error message s in the JOR of the migration in job spawned by ARS See the ASM 7 File Migration Administrator s Guide File not assigned No work file has been assigned or for a tape COBOL SORT Process sort less than three work files have been assigned FILEOV 1228 File overflow after record insertion one record is lost COBOL Status Key value 24 if WRITE or REWRITE statement 23 otherwise All File Organizations WRITE Catalog Management CATALOG UFAS OPEN 47 A2 10UJ No space left in overflow area for record insertion one record is lost The maximum number of generations has been reached for the specified file Check this number Not enough space to allocate one data CI or one data CA per key for indexed files 52 19 Messages and Return Codes Directory UFAS EXTENDED FILEOVLD 0507 FILEVIOL 1500 15FF SBR Collector FILEWSOV 1216 SORT MERGE System Interface with COBOL SORT to Sort file RELEASE Completion of Sort Process FLABUNKN 100F Catalog Management SHIFT File Management File Storage and Tape Handling Queued Files OPEN 52 20
341. d form the controller is different from the computed address CCCC TT RR is Cylinder Track and Record information Action None JPPC SERVICE UNAVAILABLE OR OVERLOADED FOR XCP2 SERVICE Meaning Fatal dump The capacity of the JPPC is not sufficient to start the TDS using XCP2 Action Verify the configuration of the application requested segments from the JPPC job or increase its configuration TP7GEN MAY BE NECESSARY AFTER A CHANGE OF TECHNICAL STATUS Meaning The application you are attempting to start has been generated on a previous release not compatible with the current release Action Regenerate the application with the TP7GEN utility WRONG DEFINE STATEMENT FOR H_SWAPxx RC DFASG 39 OVRVIOL Meaning An incorrect DEFINE statement concerning the swap file xx is present in the JCL for the TDS job Action Modify the JCL for the TDS job When working with the USER JOURNAL check that the TDS V5 statement DEFINE H_SWAP nn JOURNAL AFTER has been replaced by the new TDS V6 V7 statement ASSIGN USERJRNL DUMMY START UP NOT FINISHED CHECK MASTER CONNECTION Meaning The CMSC command used to manage the TDS service for example TSRV TERMINATE SERVICE is postponed since the startup has not completed 47 A2 10UJ MU and MV Messages Action Verify that the master operator is well connected and wait until the startup terminates MV24 UNDEFINED NUMBER OF TERMINALS CHECK THE NETWORK GENERATI
342. de message No action required End of form 2 End of form FF2 reached DOF mode message No action required 47 A2 10UJ FORMHEAD 0033 Unit Record Driver WRITE Printer FORMLIM 002A Unit Record Driver WRITE Printer FORMLMHD 0034 Unit Record Driver WRITE Printer FORMRCVY 0960 DATANAYV to IOFAIL Return Codes Head of form reached In DOF mode the head of form level has been detected Form limit reached End of page reached No action required might be useful as a restart point after a FORMRCVY return code Both limit and head of form reached End of page and beginning of page detected at the same time DOF mode message No action required Might be useful as a restart point after a FORMRCVY return code Form recovery needed COBOL Status Key value 9K Printer Direct Print WRITE Unit Record Driver WRITE Printer CLOSE FRMTERR RWI FUNCKEY 00BF FORMS 47 A2 10UJ Form recovery needed usually a hardware error An error occurred during printing Check with help of operator how many forms are lost and perform a form recovery Format request error Format request error The format request is not authorised during this session due to the options specified when the session was opened Function key The terminal user has pressed a function key The first two characters of the received message contain the rank of the function key 52 23 Messag
343. der to replace the damaged file and restart the system with RESTORE RESTART CLEAN Type I Destination Main operator 47 A2 10UJ 21 1 Messages and Return Codes Directory IL72 AUTO MODE STOPPED CRASH TIME LIMIT 1 IL72 AUTO MODE STOPPED 2 Meaning 1 Two crashes occurred within the time interval specified by the REPEAT command or within 60 minutes if REPEAT OFF has been specified in the ILO1 options 2 An I O error occurred on a system file during the last GCOS session The message is preceded by IL21 Action 1 Wait for a display of question ILO1 2 See message IL21 Type I Destination Main operator 21 2 47 A2 10UJ 22 IN Messages General Environment IN messages are produced by the input reader component of the system The messages may appear either in the Job Introduction and Translation Report when the job has been submitted or in the Job Execution Report when the job has been submitted by a RUN JCL statement Pertinent Manuals ICL Reference Manual oo ccccccccccccccccseccscecetececeseseseceseceneeenseeeseseseecseesaeeaes 47 A2 IIUJ JOL User S Gui d rx RO E E E EE EER E O 47 A2 12UJ Message Descriptions IN00 ron proc name error description RC edited return code Meaning An error condition has been specified to the procedure specified while calling a system primitive the return code gives the reason for the error This message normal
344. des and tells you how to make use of the return code explanations in the sections that follow Messages and Return Codes Directory Sections 51 to 54 Section 55 Section 56 Section 57 Section 58 Section 59 Appendix A list return codes in alphabetical order and give a short generic explanation for each return code For some system components there is a more detailed explanation of the return code lists the return codes in order of their hexadecimal numeric value gives detailed explanations of the return codes set by the Device Management module DVMGT gives detailed explanations of the return codes sent by the File Management modules File Assignment File Description Processing File Processing Preparation and File Management in the Transactional Context Restart Facility lists the TDS return codes in more detail mentions XBUP messages and refers you to the appropriate documentation contains completion codes for I O errors Bibliography Refer to the complete GCOS 7 manual set but especially refer to GCOS 7 Console Messages DireCtOry ccccccccccccccccceitscetstetscenseensteneenes 47 A2 61UU GCOS 7 Network System Messages and Return Codes cccccccccscesces 47 A2 29EB Network User s Guide ccccccccccccccccsccetsceesceseeeceeceecseecseessaeessesaesnseeneenseees 47 A2 94UC iv 47 A2 10UJ Syntax Notation Delivery Conditions 47 A2 10UJ Preface
345. detected at step initialization The step cannot be started Action Check JCL ifn TOO MANY DEFINE STATEMENTS TABLE OVERFLOW Meaning The number of DEFINE statements in the step enclosure is greater than the maximum number allowed by the system Result This error is usually detected at step initiation time the step cannot be started Action Check the CONFIG parameters ifn MOUNT ALL OPTION IS REQUESTED Meaning Issued during an ASSIGN if the value of the MOUNT parameter is not ALL when creating a new version of a cataloged disk file Result This error is detected at step initiation time the step cannot be started Action Check the JCL ifn ACCESS SPWRITE OR ACCESS WRITE IS REQUESTED Meaning Issued during an ASSIGN performing one of the following functions e partial deallocation of a file e releasing unused space e creation of a new version of a cataloged file Result This error is detected at step initiation time the step cannot be started Action Check the JCL ifn UPDATING OF VERSION IS INCOMPATIBLE WITH PARTIAL PROCESSING Meaning Issued during an ASSIGN if the value of parameters FIRSTVOL and LASTVOL is inconsistent with the other function of the same ASSIGN the creation of a new version of a cataloged file Result This error is detected at step initiation time the step cannot be started Action Check the JCL 47 A2 10UJ DF Messages DF30 ifn FIRSTVOL GREAT
346. dicates the reason why not The most frequent cases are e Return Code EFNUNKN the specified library has not been found e Return Code UNRECIO the disk pack or drive supporting the library may be damaged Result Processing stops Messages in the JOR indicate which units have been processed Action Correct the JCL if relevant or contact the Service Center 47 A2 10UJ MAC Messages MAC16 LIBRARY NOT AVAILABLE RETRIEVE n retrieve file efn RC edited_return_code Meaning The nth RETRIEVE library cannot be opened The return code indicates the reason why not The most frequent cases are e Return Code EFNUNKN the specified library has not been found e Return Code UNRECIO the disk pack or drive supporting the library may be damaged Result Processing stops Messages in the JOR indicate which units have been processed Action Correct the JCL if relevant or contact the Service Center MAC17 PUT ON SYSOUT RC edited_return_code Meaning MACPROC was unable to write a record to the standard SYSOUT file containing the report The return code indicates the reason Such an incident is very unusual and may be due to a system error Result Processing stops A partial listing of the source currently being processed may be accessible Messages in the JOR indicate which units have been processed Action If the incident was an I O error check the disk and the disk pack supporting the file If necessary conta
347. disconnected or SMAT entry occupied so SM cannot be connected or PLMT entry occupied The object requested is currently being used by another process Try again later 1 An attempt has been made to fix or free a page in a buffer which has some pages already fixed or freed 2 Some pages in the region to be released are still being used 3 The target segment is not vacant 4 An attempt to perform an action on an active buffer segment In all cases Contact the Service Center File currently assigned to another job Lock test error Contact the Service Center 51 19 Messages and Return Codes Directory VCAM ISO CALLVIOL 1481 RELEASE COBOL SORT Utility SORT RETURN FORMS SBR System Nucleus VMM Physical I O Access CANCEL 00D2 00DB File Management SBR Collector CANEVT 00D3 CANIO 00D4 OMH Main Console Driver RWI 51 20 Save and Restore An application tried to close SSAP while some sessions linked to the SSAP were still active Check the application and stop the session before closing the SSAP Call violation Access to the input procedure using RELEASE denied Attempted execution of SORT twice in the same step produces abnormal condition step is aborted Access to the output procedure using RETURN denied Environment is neither TDS nor IOF H_SBR was started in a non system dimension Connect H_SBR to the SYS dimension Incorrect access to an object FCB or PMD
348. does not try again to connect this terminal Who receives the message The OWNER CONTROL TW46 DTW NO POOLS Meaning no POOL has been declared at generation Who receives the message The COMMANDSUB TW48 lt Rxxx gt REPORT CREATION FAILED TERM lt dest gt USER lt user gt FROM lt RON gt Meaning Report creation failed at commit time after invocation of the H_TW_USTART primitive Who receives the message The COMMANDSUB TW49 lt Rxxx gt REPORT HELD Meaning The report has been held by an HTO command Who receives the message The COMMANDSUB TW49 lt Rxxx gt REPORT RELEASED Meaning The report has been released by an RTO command Who receives the message The COMMANDSUB TW60 lt Rxxxx gt lt status NIP3 gt Meaning Display of a status sent by the PRT 1262 NIP3 printer Who receives the message The submitter of the report TW98 TWRITER READY Meaning The Command Handler is ready to receive and process commands Who receives the message The TWCOMMSUB 47 A2 10UJ 46 15 Messages and Return Codes Directory 46 16 47 A2 10UJ Tx00 Tx01 TX02 TX04 47 A2 10UJ 47 TX Messages General Environment TX messages are produced by the TDS processor The messages appear in the JOR of the TDS job and are sent to the master terminal Pertinent manuals TDS Con epts recreire a a Ps SES 47 A2 26UT TDS Quick Reference HAndbOOK ccccccccccccecscecsceesceeteeeeeeeeeeca
349. down was requested END SYSTEM is active The job cannot be created A terminate server GCL command TTSVR has been issued Try again after complete termination of the server A TDS XCP2 interface has been invoked during TDS XCP2 shutdown It is ignored Records or blocks have been skipped 54 11 Messages and Return Codes Directory FORMS RECEIVE Unit Record Driver GET Diskette SLGMNG 1A3D SLGMNGA 1A3E SLGMUD 1A3F SLGMUN 1440 SLOGNG 1405 Mathematical Package SLOGZR 1404 Mathematical Package SMNAV 0A16 COBOL RTP IO Operations CALL data_name Debugging Display Accept etc System Nucleus Dynamic Addresser SNDARERR 1816 Catalog Management Create Record Update Record 54 12 Some received fields have not been selected because they are lost This is a warning message only Modify the selection vector for the fields to be selected if you do not want this warning T O error has been skipped because of ERROPT SKIP ARG less than 1 ARG almost negative integer Function undefined ARG less than 100 undefined Argument is less than zero log undefined The logarithm function argument is negative simple precision Argument is zero log undefined The logarithm function argument is zero simple precision Sharable module not available Program calling COBOL RTP is in a concurrent shared module This SM was inadvertently detached from its segment table during the calling process Ei
350. dy been done 47 A2 10UJ ALTRKOV APPLUNKN ARDLFBID 47 A2 10UJ VMM TDS ABNCCAD to DATALOSS Return Codes The requested service to VMM has already been done 1 The segment to be loaded in memory is resident or is already in memory 2 No more pages to be released 3 The specified file is already open 4 The segment already has the requested size In all cases contact the Service Center Attempt to close a file that is already closed Check the IFN or state the corresponding file CLOSE Another TPR has already requested that the file be closed UFAS EXTENDED OPEN BATAB RASTAB and CPTAB have already been created as this is not the first OPEN in the step This is an information message only 1227 No more alternate track available Any File Overflow in alternate track zone Disk contains Organization too many bad tracks File and Device File Storage and No more alternate tracks available Allocate a Management Tape Handling dummy file in place of the bad track 1029 Application unknown not found in catalog Catalog Management SITE CATALOG 1708 Catalog Management CATMODIF CATALOG File and Data Save and Restore Management The specified application does not exist in SITE CATALOG Deletion of access rights forbidden As SITE CATALOG is not protected it is impossible to delete the access rights of other catalogs Set access rights on SITE CATALOG Valid cataloged files fo
351. e Result This error is usually detected at step initiation time and the step cannot be started Action Correct the JCL if relevant list the contents of SYS URINIT file using the URINIT utility DV06 REQUEST EXCEEDS SYSTEM CAPACITY BY nn DEVICES OF DEVCLASS devclass Meaning According to the JCL the step requests more devices of the indicated device class than there are devices of this class on the site Result The step cannot be started Action In some step cases the number of devices requested can be decreased by using the following facilities e Device pool JCL statement POOL e Partial mounting of volumes for a multivolume file MOUNT parameter For more details refer to the JCL User s Guide DV08 INCORRECT DEVICE TYPE devtype Meaning Device Management received an illegal value for device type Legal values are for example MS MT Such an incident is probably due to a system error 14 2 47 A2 10UJ DV Messages Action Contact the Service Center DVO9 INCORRECT DEVICE ATTRIBUTE devtype device attribute Meaning Device Management received an invalid value for a device attribute Device attributes are usually specified in the DEVCLASS parameter EXAMPLES m DEVCLASS MS FSA DEVCLASS MT T9 D6250 MS MT are device types and FSA T9 D6250 are device attributes This message usually appears when the user specified a device class value that does not exist on the site Result
352. e In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center RDN13 ERROR WHILE PROCESSING OPTION STRING UNKNOWN PARAMETER jcl parameter Meaning Inconsistency in compiler options delivered to RDN module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center RDN14 ERROR WHILE PROCESSING OPTION STRING UNKNOWN PARAMETER OR INVALID VALUE jcl parameter Meaning Inconsistency in compiler options delivered to RDN module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct the JCL if relevant and report the problem to the Service Center RDN15 ERROR WHILE PROCESSING OPTION STRING SOURCE NAME MISSING Meaning Inconsistency in compiler options delivered to RDN module In most cases it is due to a user error in the JCL which was not detected at JCL translation time The message gives a simple explanation of the error Result The compilation is aborted Action Correct
353. e NEXT TDS session return code is TP7 11 NOTDONE Action Perform the following e correct the original incident to make all databases accessible 47 A2 10UJ 29 27 Messages and Return Codes Directory MV29 MV30 MV31 MV32 MV32 MV33 29 28 e run TP7GEN startup the TDS session and then verify that no further MV28 messages appear TOO MANY DUMMY VIRTUAL CORRESPONDENTS FOR NUMBER OF TERMINALS Meaning The total number of virtual correspondents in all families and the maximum number of DUMMYs exceeds the number specified in the NUMBER OF TERMINALS Clause if this clause is not overridden by a NETGEN directive Action Increase the number of terminals or decrease the number of virtual correspondents or use the NETGEN directive ERROR WHEN ALLOCATING OR CONNECTING DUMMY VIRTUAL CORRESPONDENTS Meaning TDS cannot connect all the virtual correspondents or DUMMYs because the TDS tables are full or because the swap file is too small Action Decrease the number of virtual correspondents or increase the size of the swap file TDS MAILBOX TABLE IS FULL USE CTC COMMAND ON FROZEN CORRESPONDENT Meaning The maximum size of the TDS MAILBOX table has been reached during a connection Action If there are many frozen correspondents use the CTC command to clean the table entries RESTARTABLE ABORT RECOVERY PHASE Meaning A restartable abort is beginning its recovery phase Act
354. e Trace file Generally this return code is issued following an error in passing parameters An exception has occurred during the initialization of the Dynamic Addresser Modify the caller s code Exception during program loading Contact the Service Center Procedure exception within a TPR Error in UFAS code Contact the Service Center 47 A2 10UJ IONOP to RESIDENT Return Codes PROJUNKN 1026 Project unknown not found in catalog Catalog Management CATALOG The project on which access rights are to be set CATMOTIF or deleted does not exist in SITE CATALOG PROTERR 1854 Protocol error PRTYLIM 0024 A priority value specified by the user in the request has been forced to the authorized limit System Nucleus Load Module Dispatching priority defined at linkage time not Internal Loader allowed in job class used The system has limited the priorities PRTYVIOL 1225 Priority violation SBR Analyzer Illegal change of dispatching in SBR Analyzer Contact the Service Center PSIEXS 00E8 Private segment information excess System Nucleus Dynamic There is insufficient private segment Addresser information Enlarge the output zone for the H_DYNAD primitive 47 A2 10UJ 53 31 Messages and Return Codes Directory PSTATERR 1C15 System Nucleus Task Internal Management PSWVIOL 1405 MCS ENABLE DISABLE PTIMEOV 121A GPL Task Management PURGECI 0509 UFAS EXTENDED 53 32 Pr
355. e corresponding field s in error Dialog protocol rejected Negative number to power is ambiguous Result gt 10 252 overflow power ARG Less then 200 underflow Zero to negative power is undefined Device requirement table error Distributed System Administration and Control Detailed status byte 0 Detailed status byte 0 for channel 0 Detailed status byte 0 for channel 1 Detailed status byte 0 for channel 2 Detailed status byte 0 for channel 3 Detailed status byte 0 for channel 4 Detailed status byte 0 for channel 5 Detailed status byte 0 for channel 6 52 7 Messages and Return Codes Directory DSBO7 2807 DSB2 2808 280F DSB20 2808 DSB21 2809 DSB22 280A DSB23 280B DSB24 280C DSB25 280D DSB26 280E DSB27 280F DSIHOV 1A6A DSNCPREC 1A1C Mathematical Package DSQRNG 1A19 Mathematical Package DTANOV 1A20 DTANPREC 1A21 Mathematical Package DTWOOV 1A0D DTWOUN 1A0C 52 8 Detailed status byte 0 for channel 7 Detailed status byte 2 Detailed status byte 2 for channel 0 Detailed status byte 2 for channel 1 Detailed status byte 2 for channel 2 Detailed status byte 2 for channel 3 Detailed status byte 2 for channel 4 Detailed status byte 2 for channel 5 Detailed status byte 2 for channel 6 Detailed status byte 2 for channel 7 ARG gt 175 36 overflow sinh ARG gt 10 15 loss of precision The sine cosine function argument gt 10 8 loss of precision double precision Square root of negat
356. e could not be reserved when the system was initialized at RERUN or when a batch or TDS step was started 2 The SYS JRNAL is too small when the system was initialized Send the PRLOG log to the Service Center Not enough segments available to load the specified catalog of messages The LM table is saturated 52 15 Messages and Return Codes Directory Task Management An attempt has been made to create a semaphore but a semaphore segment has overflowed because the semaphore pool is full VMM No more vacant entries are available when trying to create a segment TDS OPEN or START Number of vacant segment entries exceeds Command limit Try again after a CLOSE DEASSIGN command Unit Record Driver OPEN The number of table entries e g buffers semaphores reserved for this group has been exceeded ENTYUNKN 1000 10FF Entity unknown System Nucleus Automatic Resource 1 A dimension is unknown Manager 2 One or all named objects are not connected EPTOV 1226 Entry point table overflow System Nucleus Dynamic Addresser Entry Point Table EPT unable to hold all the Internal entry points Reduce the number of private segments or entry points or the name length Unload the unused sharable modules ERLMOV 1221 Error limit overflow abort the currently running procedure SBR Collector Too many exceptions in the probes Contact the Service Center System Output WRITE Limit reached on number of lines printed ER
357. e efn parameter does not exist The CATNOW parameter must be specified for the PREALLOC or OUTALC commands An unknown attribute or mechanism identifier has been specified In your program check the list of permitted attributes or mechanism identifiers This is a warning indicating that the specified environment or context is not allowed Named site does not exist in site table 1 The object searched for is unknown in the telecommunications dictionary or 2 No subfile is specified in the file literal of the SAVE or LOAD parameters of the CRNETGEN command correct the CRNETGEN command and rerun it 1 The original pattern was not found 2 The original SYS pattern is not allowed 53 23 Messages and Return Codes Directory OBSOLETE OFFLINE OGENUNKN OPCERR 53 24 TDS Master Command Unit Record Driver GET The M LSTC COR xxx Master Command was sent The OBJECT correspondent is not known by the TDS application If the NG parameter is used in the Master Command check that the correspondent is declared in NETGEN If the correspondent is declared for XCP1 check that it is primary for XCP2 check that a pool can reach it If the NG parameter is not used in the Master Command the correspondent has never been connected Unknown type of deleted sector Diskette Unit Record Driver Printer No belt linked to character set Requested index Printer table or editing table not found in SYS URCI
358. e error Verify file name or clear file area to continue System trace collector file access error Verify file name or clear file area to continue System trace collector file size greater than release high bound or file access error Verify file name or clear file area to continue System trace collector file contains an incorrect header record Verify file name or clear file area to continue System trace collector file control record structure error Verify file name or clear file area to continue System trace collector file control record structure error Verify file name or clear file area to continue System trace collector file access error Extractor Operator Messages TR40 And TR41 The general format of error messages generated by the extractor is TRCEXTR ERROR sicid msgnbr RC TRCEXTR stands for Trace Extractor sicid for identification msgnbr for message number and RC for return code The complete list of these messages in ascending order of the sicid message number is given below SICID 400B Messages TBL Ne Error number 47 A2 10UJ Return code Meaning Action 44 11 Messages and Return Codes Directory 400B 1 ARGERR 400B 3 SEQERR 400B 4 OUTSEQ 400B 5 OUTSEQ 400B 8 SEQERR 400B 10 OBJTPERR 400B 11 OBJTPERR 400B 12 OBJTPERR 400B 13 OBJTPERR 400B 14 OBJTPERR 400B 15 OBJTPERR TBL NE 400B 16 OBJTPERR 400B 17 OBJTPERR 44 12 Extraction argument O_IFN2 i
359. e has been allocated for the file 57 11 Messages and Return Codes Directory DFPRE 6 ABOPROC An exception has occurred during file execution DFPRE 6 CONFLICT Set in the following cases An attempt has been made to allocate a disk file in partial processing No access method has been found which corresponds to the device format and organization given for the file The access level is not I O or basic for an assigned volume of a tape or a disk DFPRE 6 DATANAV Logical access to a file is forbidden after the failure of a recovery utility that has left the file in an unstable state Disk files only DFPRE 6 DUPNAME Set in the following cases disk files only A check option was requested for a file allocation and a file already exists with the same efn A file name has been found twice on the media list for the assign DFPRE 6 EDELERR The list of volumes given by the user does not contain the one where the file ends DFPRE 6 EFNUNKN Set in the following cases An efn was not found in the media list given as a parameter of the assign statement and The file to be opened is a disk file and allocation has not been requested The file to be opened is a tape file and the processing mode is neither OUTPUT nor APPEND except for APPEND INADDR and the open was not issued by the primitive H_RFLDEF The file to be assigned is a native diskette file A tape file exists but there is an inconsi
360. e incident Result This incident occurred at the end of compiler processing when the CUs were already produced The reports may be accessible and printed Action If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary GPL K13 ERROR WHEN WRITING ON SYSOUT PUT RC edited return code Meaning The compiler was unable to write a record in the standard SYSOUT containing the report The reason is indicated by the return code Such an incident is very unusual and may indicate a system error Result Compiling stops The CU generation phase of the program being processed had already been performed Message GPLOO in the JOR indicates which CUs were already produced A partial listing of the program being processed may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary 47 A2 10UJ 20 5 Messages and Return Codes Directory GPL K13 ERROR WHEN WRITING ON PRTLIB PUT RC edited return code Meaning The compiler was unable to write a record in the report file or in the library specified in the PRTLIB parameter or the sequential file specified in the PRTFILE parameter The return code indicates the reason for the incident The return code DATALIM means that the file or library is full and cannot be extended Remember that e the PRTFILE is pr
361. e is preceded by a TW45 message 1 or GTWriter cannot access the file which contains this report In that case a TW08 message precedes the TW11 and gives the reason of the problem Who receives the message In the first case 1 above the OWNER CONTROL In the second case 2 above the SUBUSER and possibly the TWCOMMSUB if there is a non mounted disk or a return code problem 47 A2 10UJ TW Messages TW12 lt RxXxxx gt RECOVER lt term gt Meaning The printing of the report was interrupted by a communication breakdown Who receives the message The OWNER CONTROL Tw13 TWRITER ERROR lt proc gt lt retcode gt This message is also reported in the JOR Meaning An error occurred in a procedure Who receives the message The MASTER TW14 lt command gt COMMAND NOT AUTHORIZED Meaning The submitter may not use this command Who receives the message The COMMANDSUB TW15 lt command gt COMMAND MEANINGLESS Meaning The syntax of this command is correct but it has no meaning for GTWriter at that moment thus no effect Who receives the message The COMMANDSUB TW16 DPR REPORT QUEUE OVERFLOW Meaning GTWriter was not able to enqueue the report Who receives the message The COMMANDSUB TW17 lt command gt UNKNOWN TERMINAL OR POOL Meaning The terminal or pool has not been declared in the generation of GTWriter Who receives the message The COMMANDSUB TW18 lt command gt UNKNOWN OUTPUT
362. e operator issued a CR Cancel Request command for this volume indicating that the volume was not available In the other cases it is probably a system error Result The step cannot be restarted Action Check the volume or contact the Service Center RESTART OF IFN ifn NO SEGMENT AVAILABLE FOR FDB RC edited return code Meaning System error during the restart of a step Result System error Action Contact the Service Center 47 A2 10UJ FP28 FP29 FP30 FP31 47 A2 10UJ FP Messages RESTART OF IFN ifn NO SEMAPHORE AVAILABLE FOR FDB RC edited return code Meaning System error during the restart of a step Result System error Action Contact the Service Center RESTART OF IFN ifn MISMATCH BETWEEN LABEL AND STRUCTURES RC edited return code Meaning The contents of the Data Management control structures saved at CHECKPOINT time do not correspond to the file labels on the mounted volumes at restart time for the specified file File not on volume or incorrect volume sequence number Result The step cannot be restarted Action Ensure that the correct volumes were mounted RESTAT OF IFN ifn UNABLE TO CREATE FECB RC edited return code Meaning System error during the restart of the step Error during creation or update of the FECB control structure Result System error Action Contact the Service Center RESTART OF IFN ifn ERROR DURING A M SPECIFIC PROCESSING RC
363. e previous TDS cold restart phase The current TDS restart mode is forced to cold in order to ensure the TDS next session consistency Action None Files are recovered to their last commitment point TDS is cold restarted Mv40 IDS GAC ERROR TPR XXXXXXXXXXXK XXX SCHEMA COMMIT XXX USABLE SCHEMAS Meaning Fatal abort The swap area used to save IDS II currencies after a TPR execution is not sufficient The size of this area is computed at the beginning of the first TDS session following TP7GEN This size depends on schema descriptions and depends on the STDS clause MAXIMUM NUMBER OF SCHEMA IS maxschema PER COMMITMENT TPR XXXXXXXXXXXX is the name of the faulty TPR XXX SCHEMA COMMIT is the maximum number of schemas per commitment unit If the clause MAXIMUM NUMBER OF SCHEMA IS n PER COMMITMENT is absent from the STDS generation member the value XXX is 001 If the clause is present XXX is the value n XXX USABLE SCHEMAS is the number of schemas currently usable for the TDS session Action Check the value XXX SCHEMA COMMIT is correctly defined If not increase this value and run TP7GEN If XXX is correct contact the Service Center Mv41 XXXXXXXXXXXX CANNOT BE MASTER OF TDS NOT MASTER IN A PREVIOUS SESSION Meaning As from TS7458 this message is issued at TDS warm restart when the master of the current TDS session whose name is XXXXXXXXXXXX was an ordinary user in a previous TDS session As he is still known to
364. e program or the JCL BREAK POINT QUIT Meaning An abort has been requested by the response QUIT INTERNAL SORT ERROR Action Report the problem to Technical Support ONLY OUTPUT DATA IS CORRECT FOR TAPE INPUT FILES Action Correct the JCL or DSL 47 A2 10UJ TD26 TD26 TD26 TD26 TD26 TD26 TD26 TD26 TD26 47 A2 10UJ 02 03 04 05 06 07 08 09 10 TD Messages MIN IS GREATER THAN MAXIMAL INPUT RECORD LENGTH Action Correct the JCL or DSL or SRTDEF MIN is defined as the length of the shortest record which can hold all the KEY ARRANGE SUM and INCLUDE OMIT fields INCLUDE OMIT FIELD END OUT OF MINIMAL INPUT RECORD Action Correct the JCL or DSL MIN is defined as the length of the shortest record which can hold all the KEY ARRANGE SUM and INCLUDE OMIT fields KEY SUM ARRANGE FIELD END OUT OF MINIMAL INPUT RECORD Action Correct the JCL or DSL MIN is defined as the length of the shortest record which can hold all the KEY ARRANGE SUM and INCLUDE OMIT fields AVERAGE IS GREATER THAN MAXIMAL INPUT RECORD LENGTH Action Correct the JCL or DSL must be corrected AVERAGE IS LOWER THAN MINIMAL INPUT RECORD LENGTH Action Correct the JCL or DSL MIN is defined as the length of the shortest record which can hold all the KEY ARRANGE SUM and INCLUDE OMIT fields DUMMY INPUT FILE Meaning This function is not available Action Correct the user program
365. e reason for the problem may be one of the following e User error in volume specification the indicated volume does not exist e The volume is not available e g broken Result Depending on conditions the step is aborted either at step initiation or during step execution Action Modify the command 14 1 Messages and Return Codes Directory DV04 RESIDENT VOLUME ON device id REQUEST IS REJECTED Meaning A device is explicitly requested to support a volume by a JCL statement POOL device id but either the volume requested is a resident volume mounted on another device or a resident volume is mounted on the device requested Result This error is usually detected at step initiation time and the step cannot be started Action Correct the JCL whenever possible the explicit request of a particular device in a POOL should be avoided DVO5 CHARACTER SET NUMBER nn OR FORM form id IS UNKNOWN Meaning The printer was assigned in direct mode to the step but the value specified in the MEDIA parameter of the JCL statement ASSIGN is not valid Remember that e The first two characters of media indicate the character set to be used e The last four characters of media indicate the form to be used e Both character set and form descriptions must be known to the system and stored in the SYS URCINIT file For more details on this topic refer to System Operator s Guide appendix The SYS URCINIT Printer Control Fil
366. e restarted However recovery continues for other TDSs Action See Journal Recovery on Takeover in the File Recovery Facility User s Guide batch user_ron cannot be recovered Meaning This message is printed in the SYSOUT of the recovery step Recovery cannot be performed on this batch or IOF job Action None 47 A2 10UJ RY Messages RY31 ROLLBACK SUCCESSFUL RY32 ROLLBACK NOT SUCCESSFUL NUMBER OF ROLLED BACK BLOCKS number Meaning RY31 and RY32 are printed in the SYSOUT of the recovery step At the end of the rollback of each file accessed by the step before system crash either RY31 or RY32 appears Both messages follow a message naming the file and indicate the result of the rollback on the file Action Run the ROLLFWD utility on files which have remained unstable RY33 INCIDENT ON USER FILE ERROR DURING OPEN 01 WRITE ERROR 02 READ ERROR ON JOURNAL 03 CHANNEL PROGRAM WRITE ERROR 04 CANCEL REQUEST DURING OPEN 05 I O ERROR ON FICB 06 FD CREATION IMPOSSIBLE 07 ERROR DURING CLOSE 08 SHARED FILES TABLE ACCESS ERROR 09 A HEURISTIC DECISION HAS BEEN TAKEN ON STATE OF COMMIT ACCESSING THIS FILE EFN FILENAME 10 Meaning This message is printed in the SYSOUT of the recovery step An incident has occurred during the rollback of a step RY33 appears after a message identifying the user file The state of the user file is as follows 01 09 unstable 10 stable but po
367. e specified ifn is not assigned The specified file was not locked The specified function cannot be carried out as the file is under the control of GAC The wait for a resource has been too long or no wait can be performed The specified ifn is either invalid or not open 57 21 Messages and Return Codes Directory 57 4 INTERNAL FUNCTIONS For Service Center Use Only The internal function numbers given in this subsection correspond to the internal functions of File Processing Preparation as shown in the following table File Processing Preparation Internal Functions TBL NI Function Internal Function Number 2 Allocate Space for or Extend a Disk File 6 Create Data Management Control Structures Part of OPEN 8 Create the Labels on a Tape 11 Synchronize Access to Data Management Control Structures 17 Modify the Processing Mode for a Tape File Close a File 18 Close a Volume 20 Open a File Main Procedure 21 Open a Volume 22 Retrieve a File Description 25 Convert Media Addresses 26 File Management Part of Restart Processing 27 Volume Positioning and Label Reading 28 Allocate Space for a Diskette File 29 Create Delete or Modify a Dynamic File Descriptor 32 File Management Part of Checkpoint Processing 33 Lock a File 38 Release Space for a Disk File 57 5 File Management In The Transactional Context Restart Facility DU DU DU TBL NI AL 3 INVUSE When initializing access to the SYS KNODET f
368. e to LIST_TDS_COR XCP2 DTLD NG 0 TX28 STATE state TYPE cor typ LIST list OPTION option Response to LIST_TDS_COR TYPE TX29 CORRESPONDENT ADDRESS MXALCSES CUMALCSES REJALCSES cornm coraddr mxalses cumalcses rejalcses Response to LIST_TDS_COR XCP1 DTLD NG 0 47 A2 10UJ 47 5 Messages and Return Codes Directory TX30 TX31 TX32 TX33 TX34 TX35 TX36 47 6 TDS tds date_time heading 1 CHARACTERISTICS OF THE POOL 2 CURRENT SEARCH RULES OF SM LIB 3 CURRENT SIMULTANEITY LEVELS 4 5 GENERAL TDS STATISTICS LIST OF SWAP FILES Response to 1 LIST COR POOL 2 DISPLAY _TDS SMLIB 3 DISPLAY _TDS SIMUL 4 DISPLAY TDS 5 DISPLAY _TDS SWAP poolnmi poolnm2 poolnm3 poolnm4 poolnm5 poolnm6 Response to LIST COR POOL cor POOL POOL MAXSESNB MINWINSC MINWINTG AUTOACT DRAINSC DRAINTG MAXSYNC poolnm maxsesnb minwinsc minwintg autoact drainsc draintg maxsync Response to LIST COR POOL cor pool DTLD NG See CALL DISP POOL Procedure in TDS COBOL Programmer s Guide CORRESPONDENT ADDRESS COR_BACKUP PRIM ACTIVE INITWK cornm coraddr corbck prim activ initwk Response to LIST TDS COR XCP1 DTLD NG CORRESPONDENT ADDRESS COR_BACKUP PRIM PRL WIN SYNLVL cornm coraddr corbck prim prl win synlv Response to LIST_TDS_COR XCP2 DTLD NG See CPI C XCP2 User s Guide POOL CURSESNB CURWINSC CURWINTG TRSTSESNB poolnm cursesnb curwinsc curwint
369. ecified library Result In a Batch environment the step execution is aborted Action Check the member name and library name specified in the ASSIGN statement 47 A2 10UJ DDM Messages DDM00408 lt error localization gt UNEXPECTED RETURN CODE WHEN LOADING SCHEMA schema name SUBSCHEMA subschema name RC edited return code DEBCODE edited debcode Meaning An abnormal condition has been detected during the loading of the schema The return code gives the reason for the error This message usually indicates a system error Result In a Batch environment the step execution is aborted Action Contact the Service Center DDM00409 lt error localization gt UNEXPECTED RETURN CODE WHEN ANALYZING THE COMMAND RC edited return code Meaning An abnormal condition has been detected during analysis of an IDS run time command The return code gives the reason for the error This message normally indicates a system error Result In a Batch environment the step execution is aborted Action Check the run time options provided contact the Service Center DDM00410 lt error localization gt UNEXPECTED RETURN CODE WHEN OPENING TRACE RC edited return code Meaning IDS failed to OPEN the file to receive the outputs created by the TRACE option The reason is given by the return code Such a message would be very unusual when traces are directed to the standard SYSOUT no ASSIGN statement was pro
370. ectly Abnormal return code Result In a Batch IOF environment the step execution is aborted Action Contact the Service Center DDM00051 lt error localization gt UNEXPECTED RETURN CODE WHEN CALLING GENERAL INDEX MANAGER RC edited return code Meaning The General Index Manager primitives have not been executed correctly Abnormal return code Result In a Batch IOF environment the step execution is aborted Action Contact the Service Center Messages and Return Codes Directory DDM00384 lt error localization gt SCHEMA NAME schema name DOES NOT CORRESPOND TO MEMBER NAME member name IN LIBRARY ASSIGNED TO IFN DDLIBi Meaning The specified member of the object schema library contains the description of a schema whose name is different from the name of the member This may arise when a LIBMAINT command RENAME has been performed on this member This command should not be used on DD objects To change the name of a schema the schema must be completely described again using the MNDD or the DDLPROC utility Result In a Batch environment the step execution is aborted Action In the case of an I O error return code IOFAIL the volume and drive supporting the library should be checked Contact the Service Center if necessary DDM00385_ lt error localization gt NO FILE IS ASSIGNED TO IFN S DDLIB1 DDLIB2 DDLIB3 Meaning The IDS session cannot be initialized because no library description
371. ectory 29 34 47 A2 10UJ 30 OU Messages General Environment OU messages are produced by the SYSOUT component of the system Some messages OU26 OU27 OU28 OU32 appear only in the JOR of the WRITER service job and are simply a log of messages that have been displayed on the operator console They indicate an abnormal situation during the printing of output The other messages may appear in the JOR of any user job and indicate an abnormal situation during the creation of an output file Pertinent Manuals GCOS 7 System Operator s Guide ccccccccccccccccecscecsescssetseesseenseenstenseenaes 47 A2 53US GCOS 7 Console Messages c cccccccccccsceesceesteenseeneecee esses esee serse senssa seene 47 A2 61UU Message Descriptions 0U13 ron step SYS OUT OVERFLOW Meaning The step tried to write a record in the public SYS OUT file but the file is full and cannot be extended Such a situation usually arises when a step makes a loop while writing to the SYS OUT file Result The step will wait until space is released from SYS OUT However the main operator may decide to abort the step Action If a step generates very large outputs permanent SYS OUT should be used Use the LINES limit parameter of the STEP statement to give protection against indefinite loops 47 A2 10UJ 30 1 Messages and Return Codes Directory 0U26 0U27 0U28 0U29 0U30 30 2 ddnn ron oseq CANCELLED R
372. ed Action Contact the Service Center 9 27 Messages and Return Codes Directory DDM01792 lt error localization gt SCHEMA DML INCONSISTENCY Meaning Inconsistency has been detected between the schema and the program which processes the data base This error may have the following origins The schema has been redefined without recompiling the DML programs e The type of the record is incompatible with the function requested Action Check DML program against the schema contents Contact the Service Center if necessary DDM02048 lt error localization gt DATA BASE CURRENCY INCONSISTENCY AT ADDRESS At PSL Meaning Inconsistent currencies in the data base currency doesn t point to any record or currency points to a record which has a wrong type Result In Batch environment the step execution is aborted Action Contact the Service Center 9 28 47 A2 10UJ 10 DF Messages General Environment DF messages are produced by the part of File Management that assigns the internal file name to the physical file The internal file name is given in most messages The explanations in the following message descriptions are given assuming that the file is referenced through a basic JCL statement ASSIGN The remarks are also valid when the file is referenced in a parameter of a step defining statement SDS such as INFILE OUTFILE OUTLIB etc Pertinent Manuals Catalog Managem
373. ed by return codes from 0100 to 7FFF The return codes are listed in this section in numerical order of code value Each entry in the list has one of the following two formats Format with Two Numerical Values for a Return Code Num a Num b Mnemonic Explanation where Num a Numerical Value a is the lowest value four hexadecimal digits a return code can have Num b Numerical Value b is the highest value four hexadecimal digits a return code can have Mnemonic is the name of the return code Explanation gives a general explanation of the return code 55 1 Messages and Return Codes Directory 55 2 Format with One Numerical Value for a Return Code Num c where Mnemonic Explanation Num c Numerical Value c is the value four hexadecimal digits of a specific return code Mnemonic is the name of the return code Explanation gives a general explanation of the return code List of Return Codes Numerical Value s 0000 OOFF 0000 0000 0001 0002 0003 0005 0006 O0O0OF 0010 0011 0012 0013 0013 0014 0015 0016 0017 0018 0019 0020 003F 0021 0022 Mnemonic NORMAL DONE YES DONEIDC DONEIDE DEBUG IGNORE INTER SKIPPED ENQUE PADDING ALREADY NO NOTYET RELOC ALMOST DUMMY UNUSED LONGWAIT RETRY LIMIT UNDERLIM CHAINLIM Explanation Operation has been normal or almost normal Request has been fulfilled Request has b
374. ed by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The node segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The generated code segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The buffer segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO MODIFY SEGMENT ATTRIBUTES Action Report the problem to Technical Support UNABLE TO MODIFY SEGMENT ATTRIBUTES Action Report the problem to Technical Support 47 A2 10UJ TD12 09 TD12 10 TD12 11 TD14 01 TD14 02 TD14 03 TD14 04 TD14 05 TD14 06 TD14 07 47 A2 10UJ TD Messages UNABLE TO CHANGE SEGMENT SIZE Meaning The segment used for large COBOL key tables cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning A pseudo buffer segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO LOCK B_SEGMENT
375. ed during the transfer of a page between main memory and the backing store Note the disk responsible and contact the Service Center If the number of I O errors reaches a certain value the backing store file will be reformatted at the next system restart Unrecoverable I O termination Contact the Service Center Unrecoverable hardware error detected Consult Service Center Undefined U A step abort has forced the closure of an IDS area The area is left in an UNSTABLE state Unused resource The resource requested is not present on the site Station known but not yet in use A CI has been updated Record being accessed was unlocked at the end of the previous commitment unit and has meanwhile been modified by another user Warning sent only in LOCKMARK mode in DEFINE 47 A2 10UJ UPDIDXOV 121B UPTERM 04C1 Process Management System Nucleus Task Management USEREQ 0980 GTWriter DMU TDS Any TPR Command USERRJCT 1B00 1BFF USERUNKN 1025 Catalog Management CATALOG VACANT 0B00 V FUERR 1C23 Unit Record Driver OPEN Printer VMALIM 0030 VMANAV 0A1A IRM Internal VMM Network Generation 47 A2 10UJ VMA limit size reached RESNAV to YETALLOC Return Codes There are too many updatable indexes Mother task is terminated The main process is terminated which causes the SAM process to abort A subtask has been aborted because the main task is terminated compl
376. ed either at step initiation or during step execution Action Check the JCL and rerun the job 47 A2 10UJ DV Messages Dv20 TWO ASSIGNED FILES ON NON SHARABLE VOLUME volname Meaning There are two ASSIGN statements on a non sharable volume e g magnetic tape Result The error is usually detected at step initiation time the step cannot be started Action Check the JCL If the same volume is to be used successively using two ifns in the same step use the POOL FIRST option for the first ifn and the POOL NEXT option for the second ifn Dv21 UNSUCCESSFUL ACCESS ON FILE SYS URCINIT xxxx FOR volname Meaning xxxx is the edited value of the return code A unit record device e g printer is to be used directly by the step Device management wanted to access the SYS URCINIT file to retrieve the characteristics attached to the volume specified in the ASSIGN statement e g character set form identification Access to SYS URCINIT failed Result This error usually occurs at step initiation time the step cannot be started Action If the incident was an I O error check the SYS ERLOG file for a complete description of the error Dv22 THE DEVICE CLASS OF VOLUME volname IS NOT devclass 1 BUT devclass 2 Meaning Warning message indicating that the density specified in the command devclass 1 for a volume is not the same as that found on the volume devclass 2 Result The value for the density found
377. ed in site catalog 01 is linked to a ha jas and has not auto attach option 02 Meaning An attempt is made to open a user file efn whose catalog checks are not satisfied The conditions for which the catalog is not valid are 01 The catalog concerned is not cataloged in the SITE CATALOG 02 The catalog of the user file is linked to an HA type JAS and is not auto attachable Action 01 Ensure that the SITE CATALOG contains the catalog 02 Ensure that this catalog is auto attachable before retrying opening the file OPEN REJECTED FOR efn USER FILE CONNECTION TO SYS JAS NOT DONE AT STEP INITIATION 01 OPEN REJECTED FOR efn USER FILE SYS JAS NOT AVAILABLE ON THIS SITE 02 Meaning When the efn user file opened the After Journal was unavailable for the step Message 01 the After Journal is unavailable because it must be known at step initiation If the step needs to use at least one file protected in AFTER mode you must assign a file cataloged with JOURNAL AFTER or BOTH statically for this step or include a JCL command DEFINE JOURNAL AFTER or BOTH Message 02 the After Journal was not created or an incident occurred when the system restarted In the latter case the MAIN operator receives message JP41 Action 01 If at least one file needed by the step is protected by the After Journal it must e either be statically assigned and cataloged with JOURNAL AFTER or BOTH e or include the JCL comman
378. ed volume cannot be opened for access at volume level The reason is given by the return code Action Contact the Service Center SYSTEM I O ERROR IN H_OPENV FOR IFN ifn Meaning System error An irrecoverable I O error has been encountered during an open volume operation while accessing the SYS KNODET file Action Contact the Service Center RESTART OF IFN ifn NOT ASSIGNED ANY MORE RC edited return code Meaning System error during RESTART of a step Action Contact the Service Center 17 5 Messages and Return Codes Directory FP22 FP23 FP24 FP25 FP26 FP27 17 6 RESTART OF IFN ifn UNABLE TO CLOSE Meaning System error Action Contact the Service Center RESTART OF IFN ifn ERROR WHILE ACCESSING KNOT RC edited return code Meaning System error during the restart of a step Action Contact the Service Center RESTART OF IFN ifn UNABLE TO DELETE CHANNEL PROGRAM RC edited return code Meaning System error during the restart of a step Action Contact the Service Center RESTART OF IFN ifn VOLUME OR EFN NOT ASSIGNED RC edited return code Meaning System error during the restart of a step Action Contact the Service Center RESTART OF IFN ifn ERROR IN MEDIA MOUNT REQUEST RC edited return code Meaning If the return code is MDNAV the following problem occurred During the restart of the step the mounting of a volume supporting the file has been requested but th
379. edited return code Meaning System error during the restart of the step Error during repositioning of the file by the Access Method Result System error Action Contact the Service Center 17 7 Messages and Return Codes Directory FP32 SPACE CANNOT BE DEALLOCATED ON VOLUME volname FOR IFN ifn EFN efn Meaning Allocation was requested for the specified file through the JCL ALLOCATE statement or default allocation for a temporary file The allocation has been performed by File Management but an error was detected during the OPEN processing File Management then attempted to deallocate the file but an incident occurred during this operation Result The file cannot be opened an abnormal return code is returned to the program The file is still allocated on the specified volume Action Try to deallocate space using the DEALLOC utility The volume may be damaged Contact the Service Center if necessary FP33 SPACE DEALLOCATED ON VOLUME volname FOR IFN ifn EFN efn Meaning Information message indicating that a file allocated in this step through JCL ALLOCATE or default allocation for a temporary file has been deallocated because an error has been detected during OPEN processing A message FP17 gives the reason for the error FP34 VOLUME volname SKIPPED FILE NOT FOUND FOR EFN ifn EFN efn Meaning Information message indicating that this volume does not contain the EFN so it has been skippe
380. een accessed in the same way as for files above HITCOUNT is the read hit count for the pool in the same way as for files above 13 2 3 Step Level Statistics TURBO STEP STATISTICS STEP step name POOLSIZE k USED SIZE 1 NBPOOLS m AVAIL CI n FREE CI oOo TOTAL CI p SEGCR q SEGDL r READIOCT s WRITEIOCT t Meaning This message is output at the end of the step POOLSIZE is the amount of memory in the step dedicated by the user to buffers whichever file or buffer they belong to It must be considered together with USED SIZE and NBBUF It is a maximum value The value of POOLSIZE is expressed in Kbytes USED SIZE is the actual maximum amount of memory dedicated to buffers in the step All buffer segments are taken into account including EMPTY buffers whichever pool or file they may belong to The value of USED SIZE is expressed in Kbytes To make the best use of the resources available USED SIZE must be approximately equal to POOLSIZE AVAIL CI is the number of C I buffers already created during the current GCOS 7 session and not reserved by an active job These buffer resources are available for any new job FREE CI is the number of C I buffers already created during the current GCOS 7 session and not active not input output not BUSY not WD not RM TOTAL CI is the number of C I buffers already created during the current GCOS 7 session This is reinitialized at the beginning of a session NBPOOL is
381. een fulfilled Done correct input data Done input data error Debugger must be called Do not take any action The action has been done but an interrupt has occurred Records or blocks have been skipped Request has been enqueued PADDING has occurred during a move operation Service was already fulfilled before the current request was issued Negative answer to test request Answer to a test request is negative Relocation was applied Request not fully performed A dummy file was assigned Unused resource It may be some time before the available resources are free Request not done please retry Value limit has been reached during the operation A value specified in the request has been forced to the lowest authorized limit The limit of a chain of elements has been reached 47 A2 10UJ 47 A2 10UJ 0023 0023 0024 0024 0025 0026 0027 0028 0029 002A 002B 002C 002D 002E 002F 0030 0031 0031 0032 0032 0033 0034 0035 0036 003F 0040 004C 0040 0041 0042 0043 0044 0045 0046 0047 0048 0049 004B 004C TMLIM TMPTYLIM PRTYLIM COUNTLIM LINKLIM DATALIM VOLLIM TIMELIM FORMLIM VTOCLIM EXTLIM DIRLIM SPACELIM WALIM VMALIM FORMEND1 FORMEND FORMEND2 FORMHEAD FORMLMHD FEND1LIM JUSTEXEC QREACHED H200CN H200CN H200CN H200CN H200CN H200CN H200CN H200CN H200CN H200CN H200CN H200CN H200CN QWeSCAnNaDNPWNKE SO Return Codes Listed in Num
382. een requested for the specified device If not overridden incorrect device name Information has been requested for the specified device If not overridden incorrect device type System error A new extent is necessary to enlarge system tables but it cannot be created System error Unknown function code 47 A2 10UJ 47 A2 10UJ DVMGT 60 DVIDFBID DVMGT 62 ARGERR DVMGT 62 WAOV DVMGT 63 ARGERR DVMGT 63 WAOV Device Management Return Codes in More Detail The request for allocation of the media has been rejected The user has assigned the same non sharable volume twice No information can be returned about a device type Incorrect parameters The information returned about a device type is incomplete The number of devices is greater than the specified number No information can be returned about a device type Incorrect parameters The information returned about a device type is incomplete The number of devices is greater than the specified number 56 9 Messages and Return Codes Directory 56 10 47 A2 10UJ 57 File Management Return Codes in More Detail This section gives more information about the return codes set by the File Management File Assignment File Description Processing and File Processing Preparation modules The return codes are given in the following format lt mnemonic gt lt number gt lt return code
383. eeseesseesaes 47 A2 04UT TDS Administrator s Guide ccccccccccccccccsceeseetseenet eee c eee eeesessesnseeeseenaes 47 A2 32UT TDS COBOL Programmer s Guide ccccccccccccccccccseceseceecneteteceecseeesessaes 47 A2 33UT IOS TDS User s Guide LOS V3 cccccccccccccecceccseccsetctetssecnseesseenseenseeneenas 47 A2 81UD IOS V4 TDS User s Guide LOS VA4 occccccccccccccccccecsseetseeteectsecesneseeenaeens 47 A2 81UR Message Descriptions This section lists TDS error messages in numerical order All error messages are reported in the JOR and some appear on the screen Error messages printed in the JOR have one of two forms Convention used for null response to PMOS REQUESTED TDS tds NOT AVAILABLE Response to all commands when the TDS is not started or not valid message See text of message POOL USED KB poolused POOL SIZE KB poolsize PSEUDO BUFFERS pseudobuf Response to DISPLAY_TDS STAT 47 1 Messages and Return Codes Directory TX05 TX06 TX07 TX08 TX09 TX10 TX11 47 2 INIT SIMU COUNT init_simu CUR SIMU COUNT cur_ simu ACC SESS ALLOC sess _ alloc ACC SESS REJEC sess_rjct USED TX COUNT txnb TX ABORT COUNT txabtnb USED TPR COUNT tprnb TPR ABORT COUNT tprabtnb COMMIT COUNT cmtnb DIALOG COUNT dialnb Response to DISPLAY _TDS STAT TPR ELAPSED TIME tprelps TPR CPU TIME tprcpu DEADLOCK COUNT ddlcknb NON CONCUR WAIT nconcnb TABOV ABT COUNT tabovnb WDNAV A
384. efined for ARG gt 1 Undefined function ARG gt 1 underflow arctanh ARG too near to N PI from below ARG too near to N PI from above ARG gt 10 27 loss of precision ARG gt 157 36 overflow cosh Overflow for X gt 174 67 ARG less than 200 underflow Negative argument ARG gt 56 overflow SITE QUOTA file not accessible Quota control not available Negative argument ARG almost a negative integer ARG gt 57 53 overflow ARG less than 57 53 underflow ARG 0 ARG almost zero Negative argument or zero ARG almost a negative integer Undefined ARG less than 200 underflow Argument is less than zero log undefined Argument is zero log undefined 53 33 Messages and Return Codes Directory QMODZR 1A11 QPWRNG 1A17 QPWROV 1A65 QPWRUN 1A62 QPWRZRNG 1A16 QREACHED 003F QSIHOV 1A6B QSNCPREC 1A1D QSQRNG 1A1A QTANOV 1A22 QTANPREC 1A23 QTW0OV 1AOF QTWOUN 1A0E QUNKN 1021 MCS TDS QUOTAOV 1230 ROSTAKOV 120B R1STAKOV 120C R2STAKOV 120D R3STAKOV 120E 53 34 Second argument is zero Negative number to power is ambiguous Result 10 252 overflow ARG less than 200 overflow Zero to negative power is undefined Permanent quota almost reached consumption is at least 80 of CAT quota ARG gt 175 36 overflow sinh ARG gt 10 27 loss of precision Square root of negative number ARG too near to N PI 2 ARG gt 10 27 loss of precision Result too big wh
385. egardless of the status of the buffer containing the Control Interval which may be BUSY WD or RM IOCOUNT is the total number of p operations on I O semaphores That is the number of calls to H_CPEXEC or H_EXCP Each I O request concerns one CI or one physical record H_CPEXEC or one track H_EXCP mass formatting 13 2 2 Pool Level Statistics gt gt gt TURBO POOL STATISTICS POOL pool name NBFILES g NBBUF h GETCICOUNT i IOCOUNT j Meaning This message is output when the last efn in the pool is closed NBFILES is the maximum number of files that can be open simultaneously in the pool NBBUF is the maximum number of buffers that the user can declare for the pool This number is meaningless for the default pool as the resource buffer is not shared between files If you do not specify the BUFPOOL parameter in H_FD or the JCL statement DEFINE the file is considered to be in the default buffer pool NBBUF must be considered with POOLSIZE and USED SIZE refer to the STEP 47 A2 10UJ 13 3 Messages and Return Codes Directory gt gt gt 13 4 STATISTICS message below as there may be a conflict between the number of buffers and the amount of memory space If SECGCR lt NBBUF then the maximum number of buffers has not been created This is either because the application does not need so many buffers or because POOLSIZE is not large enough GETCICOUNT is the total number of times the pool has b
386. en ARG gt 251 Result too small when ARG less than 260 Queue unknown SEND Queue name unknown queue field of Communications Description No data transferred TPR Operation SYMBOLIC QUEUE within input CD is incorrect Requested space rejected by Quota Control on the selected volumes volume is not in the project s quota list Ring 0 stack overflow Ring 1 stack overflow Ring 2 stack overflow GCOS 7 V3A only Ring 3 stack overflow 47 A2 10UJ RANGEOUT RCERR RCVVIOL RDVIOL RECARERR RECERR 47 A2 10UJ 0805 System Nucleus 1893 1442 FORMS TDS 1482 1817 FORMS IOF OMH SBR System Nucleus 1890 Any File Organization Automatic Resource Manager RECEIVE RECEIVE RECEIVE Commands GET Command Messages VMM IONOP to RESIDENT Return Codes Value out of range The parameter is out of range Check the operator message Invalid return code Receive violation Turn error In your program the sequence of the SDPI verb is invalid as regards the enclosure level Violation in use of RECEIVE verb Read violation Error in receiving area The selection vector does not match an active form Check the selection vector H_IOF_JSTART is unable to write in the receiving area of H_LISTIOF Check the validity of H_LISTIOF Reply area incorrectly specified e g size access Problem with reply area or semaphore e g size access The p
387. end Refer to the VCAM error codes 47 A2 10UJ PT Messages PT56 CONNECTION REJECTED STATUS ACCVIOL VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Access rights violation Action Check the access rights of the specified USER PROJECT BILLING to the system or application on the remote site Refer to the VCAM error codes PT57 CONNECTION REJECTED SECURITY CHECKS FAILED VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Security checks failed on the specified USERID PASSWORD PROJECT BILLING optional if the default Action Enter the correct logon parameters Refer to the VCAM error codes PT58 CONNECTION REJECTED STATUS DNODELINK VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Destination node link down Action Call the operations center of the remote system to ready the system and its front end processor if any Then try the connection again Refer to the VCAM error codes PT59 CONNECTION REJECTED STATUS PATHNAV VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Path to destination not available Action Check the system site logon parameter against the name declared for the SYSTEM in NETGEN Refer to the VCAM error codes PT60 CONNECTION REJECTED USER ALREADY LOGGED VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning As in message text Action None PT61 CONNECTION REJECTED D
388. ended action Some return codes for example DONE ALREADY do not indicate an abnormal condition and consequently do not require any corrective action There is a list of abbreviations used in the Interpreting Return Codes Section 47 A2 10UJ 53 1 Messages and Return Codes Directory IONOP 0484 Physical I O Access IOTERM 2800 280F IRNAV 0A08 ISDBUSY 0201 Channel not operational The device is not operational It has been held by the system after an important flux of reported asynchronous events Contact the Service Center Hardware detailed status byte Input reader not available Request deleted because either at least one ISD points to the segment or other ISD s point to the segment System Nucleus VMM Internal ISDOV 1224 System Nucleus VMM ITMNAV 0A07 Availability Control GAGS Dynamic System Display File Management Before Journal Journalization Task Management TPR Operation System Nucleus TDS 53 2 Operation cannot be performed because an ISD is still pointing to the DSD of the Process Group to be released Overflow in the number of ISDs requested Too many ISDs point to the same segment Item in a list not available Resource found but the requested entry type does not exist Virtual screen description made unavailable No Before Journal has been specified for the file therefore it cannot journalize A step requires After Journalization bu
389. ening file closing file space allocation and extension and file recovery after step abort Pertinent Manuals BFAS User s Guide inani i a i T AET a a aaa 47 A2 02UF UFAS User s Guide V1 V2 V3A V3B ssnoinononnennnneennssenseeseeseseeeseeeene 47 A2 O1IUF UFAS EXTENDED User s Guide V3A V3B V5 V6 V7 cccccccsesssesseetsess 47 A2 04UF Catalog Management User s Guide c ccccccccccccccesseessecsseentecneeceeeeeesessaes 47 A2 35UF IGE Users Guid ssi ccrann ides ee BEAR A E a aes 47 A2 12UJ Message Descriptions FP01 SYSTEM I O ERROR H_RQSPCE FOR IFN ifn Meaning During extension of the file indicated in the message the system was unable to access the system file SYS KNODET Result An abnormal return code is returned to the program as a result of the WRITE operation Action Contact the Service Center 47 A2 10UJ 17 1 Messages and Return Codes Directory FP02 FP03 FP04 FP05 17 2 BLOCKS TRACKS SPACE EXTENDED ON VOLUME volname NEW SIZE size CYLINDERS FOR IFN ifn EFN efn Meaning Information message indicating that the new file was automatically extended The new size of the file after extension is given in the message Result Execution proceeds Action None NO SPACE AVAILABLE ON VOLUME volname FOR EXTENSION IFN ifn EFN efn nnn NO SPACE AVAILABLE ON RESIDENT FOR EXTENSION Meaning The automatic extension mechanism has been initiated for the specified
390. ent User s Guide c cccccccccccccecstecseecstetseessceseeetseenstenaes 47 A2 35UF ICL Reference Manual sorsacsciosiirisninii iaee 47 A2 11UJ JCL User s Guide earet a A r O Hae 47 A2 12UJ Message Descriptions DF02 ifn DEFINE ALREADY REQUESTED Meaning Several DEFINE statements appeared in the same step enclosure for the same ifn Only one DEFINE statement is allowed per ifn Result This error is usually detected at step initiation time the step cannot be started Action Merge the DEFINE statements into a single statement if relevant 47 A2 10UJ 10 1 Messages and Return Codes Directory DFO3 ifn ALREADY ASSIGNED Meaning Several ASSIGN statements appeared in the same step enclosure with the same ifn Except in the case of file concatenation where the ifn is specified only in the first ASSIGN an ifn can only be associated with one external file Result This error is usually detected at step initiation time the step cannot be started Action Check the JCL DFO6 UNABLE TO INITIALIZE SYS KNODET Meaning An error has occurred at system initialization during the initialization of the file SYS KNODET or File Management cannot reserve the necessary tables for SYS KNODET Result The system cannot be initialized Action Verify the CONFIG parameters or the allocation parameters of SYS KNODET or DFO6 UNABLE TO REINITIALIZE SYSTEM SITE CATALOG NOT FOUND Meaning During a warm restart the SITE CA
391. ent entries are used by different components of the system Action Link again the step providing the linker command VACSEG SHARE 10 if it was not already present or increase the value specified in the VACSEG command if this command was already present DDM00402 lt error localization gt MISMATCH BETWEEN SDDL REFERENCE DATES IN SUBSCHEMA subschema name IN LIBRARY ASSIGNED TO IFN DDLIBi sddl ref date time AND IN PROGRAM program name date time Meaning IDS detected an inconsistency between the subschema and the programs which process the data base This may arise for example when the subschema description has been modified without recompiling the programs which reference the schema DDM00403 lt error localization gt MISMATCH BETWEEN DD OBJECT NAMES IN MAIN PROGRAM program name SUBSCHEMA subschema name SCHEMA schema name AND IN SECONDARY PROGRAM program name SUBSCHEMA subschema name SCHEMA schema name Meaning The schema or subschema object referenced in the secondary program is different from the DD objects used in the main program Action Check the DB clauses in the main and secondary programs 47 A2 10UJ 9 11 Messages and Return Codes Directory 9 12 DDM00404 lt error localization gt MISMATCH BETWEEN SCHEMA NAMES IN SUBSCHEMA subschema name IN LIBRARY ASSIGNED TO IFN DDLIBi schema name AND IN LOADED SCHEMA schema name Meaning The schema name in the subschema o
392. ent stack overflow Process local detachment stack overflow Too many sharable modules are switching in the stack Modify the user s code 53 29 Messages and Return Codes Directory PMDVIOL 1463 BFAS UFAS Tape Files System Nucleus START VMM TDS TPR Operation PNBERR 1852 PQOV 1233 File Management Tape Handling PROCEXCP 04C5 Exception Handling Job Management Load Module Loader Network Generation RWI System Nucleus Dynamic Addresser Loader TDS TPR Operation UFAS EXTENDED 53 30 Processing mode violation Current PMD is different from the PMD input Check rules for START programming Incorrect processing mode OUTPUT Contact the Service Center Processing mode violation P number error Permanent quota exceeded for the project File Storage and Permanent quota overflow Contact the Service Center Abort by a process or system exception strictly reserved for ECP Procedure exception within a channel program If the error is in the user code correct the program An error has occurred during the loading of a step which could be caused by a damaged load module Link the load module again System error and system exception Contact the Service Center An exception has been recovered by RWI A message is sent to the console informing the user of the type and class of the exception and the address at which it was produced Certain information is recorded in th
393. enter 47 A2 10UJ 20 3 Messages and Return Codes Directory GPL K8 ERROR WHEN CLOSING INLIB SUBFILE member name CLOSES RC edited return code Meaning An incident occurred at the end of source program reading The reason is indicated by the return code Such an incident is very unusual and may be due to a system error Result Compilation of the source program continues Action Check the compilation was correctly performed and report the problem to the Service Center GPL K9 ERROR WHEN CLOSING PRTLIB SUBFILE proc name_L CLOSES RC edited return code Meaning An incident occurred at the end of creation of the listing in the print library The reason is indicated by the return code Such an incident is very unusual and may be due to a system error Note that the name of the member is derived from the procedure name by adding the _L suffix Result The listing may be accessible from the print library At the time of the incident the CU had already been produced assuming that no serious errors were detected in the source program Action Report the problem to the Service Center GPL K10 ERROR WHEN CLOSING CULIB RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to CLOSE the CU library The return code gives the reason for the incident Result The CUs had already been produced and may be accessible in the CU library Action If the incident
394. enter Block format error Block format error at physical level the checking of the structure of the data block which was submitted to PUT was unsuccessful The block structure is not valid length ALN RDW position or values End of Data EOD value incompatible Driver Diskette with last block address and block size Block size error Illegal block size negative or block size should not be less than record size or incomparable block size record size for compaction Incorrect value for BLOCKSZ specified by the user Correct value in DEFINE or PREALLOC or program The block size is greater than the track size Reduce the parameter in CONFIG which specifies the number of jobs which can share a file Block size greater than track size or size less than record size Illegal block size in the SYS JRNAL Send the PRLOG log to the Service Center Block size value O or negative or greater than sector size or less than record size 51 15 Messages and Return Codes Directory BOUNDOUT 0800 087F BREAK 1E04 DMU FILLIST VOLLIST GCL OMH PCF BSNFERR 1C26 BSOVLD 0503 System Nucleus VMM BSWSOV 1222 BUFNASG 0906 RWI 51 16 Value out of bounds A break request has been issued from the The user has issued a QUIT command An illegal interruption has occurred In IOF mode re execute the function without interruption The operator pressed the BREAK key Return code given by PUTIOF
395. enter ifn NO DATA RETRIEVED SUBFILE HAS BEEN SET EMPTY Meaning The first data block of the subfile has an incorrect subfile identifier Result The subfile has been set empty in the directory Some data may be lost Action None ifn DATA SALVAGING TERMINATED Meaning An error has occurred during file salvaging The salvaging is not complete Result The file is not completely salvaged Action Analyze the return code and contact the Service Center ifn DATA SALVAGING COMPLETED Meaning This is an intermediate message from the File Salvager The data part of the file has been salvaged Result The data part of the file is coherent Action None ifn ILLEGAL DIRSIZE VALUE ZERO Meaning The number of blocks to be allocated for the library directory cannot be Zero Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn ILLEGAL LOGTRKSZ VALUE ZERO Meaning The logical track size cannot be zero A logical track is the unit of space management for libraries Result The library cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center 35 5 Messages and Return Codes Directory QL28 QL29 QL30 QL31 QL32 QL33 QL34 35 6 IFN IFN IFN IFN
396. enter Status error The status of the object makes it impossible to perform the required function Modify the caller s code or attempt the function later An error has occurred when generating the network Refer to the Network Generation message Write violation Request fulfilled The option ACTIVE has been specified for the characteristics of the test decor of the system to be dumped Testing has been performed correctly File is already allocated The catalog entry referenced by the efn parameter already contains a list of media Check the catalog entry using FILLIST Check the specified file name 47 A2 10UJ RESNAV to YETALLOC Return Codes 47 A2 10UJ 54 37 Messages and Return Codes Directory 54 38 47 A2 10UJ 55 Return Codes Listed in Numerical Order Return codes are coded indicators of a condition or conditions which exist when a step terminates either normally or abnormally The return codes result from either a programmer error a system error or at the request of an operator command The GCOS 7 return codes have both a numerical code and a mnemonic meaningful symbolic code Return codes can appear in e aJob Occurrence Report error message e a Data Management Utility error message e an Operator Console message Return codes indicating that a step has terminated normally have values from 0000 to OOFF Abnormal step termination is indicat
397. epositioning needed 92FF Hardware Check TBL NI Off line or hardware 9400 Device problem remount tape on different drive check 9400 may indicate that tape assigned as 7 track but mounted on 9 track drive or vice versa DA register error 9404 Volume unavailable 9408 EV2 error 9410 Off line 9420 Time out error 9440 47 A2 10UJ A 3 Messages and Return Codes Directory Data Errors TBL NI PSI error 9800 Dropped frame or bits 9801 Raw overscrew LRC 9802 Tape time out 9804 Postamble CRC or 9804 tape mark Data compare ID 9808 Indicates a faulty drive or hardware interface burst error may disappear if tape mounted on different drive Bad preamble 9810 Frame parity 9820 Block detector error 9840 PSI parity error 9880 Read error without 98C0 standby Program Check TBL NI Program release A BO01 Function mask A B002 violation Function mask reject A B004 Resume error A B008 Illegal sequence A B010 In general system fault Illegal data A B020 Illegal argument A B040 Illegal CCE A B080 A 4 47 A2 10UJ A 3 Disk Errors TBL NI Type of Error Code Value Device Condition Record not found 8104 Operational Check Volume unavailable 8201 Function mask 8208 violation Write protect 8210 Unequal length 8280 Hardware Check Device off line 8410 Channel exception 8401 Time out 8402 Marginal condition 8404 DLI parity error 8408 Device fault 8440 DLI
398. er More than 80 labels in an SWI writer JCRSWI Number of FECs used exceeds the maximum The quota of questions or repeatable messages is reached for the current user The table of repeatable messages is full Alternatively there are not enough segments in the given list to load a dialog of messages Overflow in the Program Checkout Facility working area Reduce the number of commands or the number of action points during the Program Checkout Facility session Incorrect NUMSF value gt 200 in H_FD The file cannot be opened Table overflow too many stations defined The maximum is 254 Too many tabulations used There is an overflow in the SBR table MSC option Contact the Service Center 47 A2 10UJ System Nucleus System Output TDS UFAS Any Organization UFAS EXTENDED Any Organization TEMPLIM 00A1 BFAS Sequential Disk System Nucleus Internal TERNASG 0904 TERNAV OA04 IOF OMH RBF 47 A2 10UJ VMM Dynamic Addresser TPR Operation OPEN Allocation of Sequence Control Block Internal RESNAV to YETALLOC Return Codes 1 Virtual memory file table overflow Too many files created Internal error 2 Anew Page Table Segment cannot be created as there are no more Page Table Area Control Entries 3 There are no more regions to allocate 4 There is a PGBT overflow In all cases contact the Service Center Table overflow too many sharable
399. er Description 0402 Mismatch between schema name or date in TPR and object file The TPR was not compiled with the same object schema file as the one assigned to the TDS 0516 0530 0532 Check that the TPR is programmed according to TDS IDS II tules 0896 to 0904 DML inconsistency Contact the Service Center 1792 to 1811 DML schema inconsistency check for consistency between TPR and schema Possibly the TPR was not recompiled after a schema modification or an internal error 49 2 47 A2 10UJ 50 Interpreting Return Codes Return codes indicate a condition or conditions existing when a step terminates normally or abnormally The codes and their explanations are listed in the following sections This section explains the basic return code format and how return codes are presented in this manual 50 1 Understanding The Return Code Format A return code contained in a message in the Job Occurrence Report has the following format RC XXXXxxxx gt namel number name2 The return code is identified by the initial characters RC This is followed by XXXX Four hexadecimal characters that represent the system component number XXXX Four hexadecimal characters that represent the numeric value of the return code gt A horizontal arrow name1 A mnemonic name known as the system component code which identifies the part of the system software that produced the return code for example COBOL Compiler The
400. eration is not allowed for security reasons Result The utility is not performed Action Perform a CATMODIF operation on the receiving catalog in order to protect it DCT11 NUMBER OF OBJECTS EXCEEDS CATALOG CAPACITY Meaning A catalog extension has been requested CATEXTD but the specified number of objects NBOBJECT parameter is too high i e the number of already declared objects plus the number of new objects declared exceeds the maximum number of objects allowed in a catalog Result The catalog extension is not performed Action Rerun the utility specifying a smaller value for NBOBJECT DCT13 SITE OR SYS CATALOG DOES NOT EXIST Meaning The requested operation requires accessing the SITE CATALOG but the SITE CATALOG does not exist on the site 47 A2 10UJ 8 3 Messages and Return Codes Directory e Ifno ATTACH statement was specified in the JCL and references to cataloged objects are made only the SITE CATALOG is searched e If private catalogs are specified in ATTACH statements and the SITE CATALOG does not exist on the site the device class and media of the private catalogs must be specified Result The utility is not performed Action Check the ATTACH statements in the JCL DCT14 EFN MUST BE SPECIFIED WITH ABSOLUTE GENERATION NUMBER Meaning A modification has been requested using the CATMODIF utility The file description to be modified is a generation group thus the external file
401. erical Order A time value specified in the request has been forced to the authorized limit The time and priority specified in the request have been forced to the authorized limit A priority value specified by the user in the request has been forced to the authorized limit A count value limit has been reached during the operation A link number limit has been reached during the operation File limit reached Volume limit reached Time limit reached Form limit reached VTOC limit reached Maximum number of extents reached End of directory reached File space limit has been reached Record length is greater than ALN value so it has been truncated VMA size limit reached Allocation made in batch mode End of form 1 End of form End of form 2 Head of form reached Both limit and head of form reached Full form 1 and form limit reached The execute right is just allowed Permanent quota almost reached consumption is at least 80 of CAT quota Last crossed channel number without form limit crossing over No VFU without FORMLIM Channel number 1 without FORMLIM Channel number 2 without FORMLIM Channel number 3 without FORMLIM Channel number 4 without FORMLIM Channel number 5 without FORMLIM Channel number 6 without FORMLIM Channel number 7 without FORMLIM Channel number 8 without FORMLIM Channel number 9 without FORMLIM Channel number 11 without FORMLIM Channel number 12 without FORMLIM 55 3 Messages and Return Code
402. error When the error is bypassed the results of READ or WRITE operations may be unpredictable CBL16 CALL program name RC edited return code AT ADDRESS address CANCEL Meaning The execution of a CALL or CANCEL statement CALL CANCEL with identifier has failed The message gives e the name of the program object of the CALL CANCEL statement e the address in the program of the CALL CANCEL statement The return code gives the reason for the error the following return codes normally indicate a user error e IDERR means that the identifier in a CALL CANCEL identifier statement does not contain a program name e NOMATCH means that the program object of the CALL or CANCEL statement does not actually exist in the load module This can be for a number of reasons e the program name is not the one expected e the program referred to has not been linked by the static linker because an explicit reference does not exist CALL literal to that program in the main program or in any subordinate program An INCLUDE program name command must be added at linkage time in order to force the static linker to include the specific program name in the load module Result Execution is aborted 4 5 Messages and Return Codes Directory 4 6 Action The source program should be checked Add an INCLUDE command at linkage time if relevant In other cases contact the Service Center immediately CBL17 STOP literal
403. error according to the level of component in question If so the return code value will be changed to give a fuller description 3 The component has no knowledge of why the error occurred and leaves the return code unchanged In addition the component may send a message to the JOR giving the reason for the error and information on whether the step was aborted or not System Component Codes and Names TBL NI Code System Component Name ADAPT System Disks Configuration ADDEL Add and Delete Functions ARS Automatic Restore and Save Automated Storage Management function AVAIL Availability Control BINDR Binder 50 3 Messages and Return Codes Directory 50 4 BOOT Bootstrap CALEX Calculate Key CAM Communication Access Method CCTL Communications Control BTNS GCOS 7 V3A only CKRST Checkpoint Restart CMG Commit Manager internal to TDS CNC Network Generation COBOL COBOL Compiler CONFG System Configuration DBACC Physical I O Interface with Access Methods DBFDS File Label Description DBFFU File Format Utility DBFHU File Handling Utilities DBFPU File Patch Utility TBL NE DBFRU File Rename Utility DBFSM File Space Management Utilities DBMGT Buffer Pool Management DBORG Database Reorganization DBSLU List Subfile Utility DBUTILIT Database Utility Y DBVHU Volume Handling Utility DBVLU List Volume Content Utility DBVPU Volume Preparation Utility DBVRU Volume Relocation Util
404. es a system error Contact the Service Center ifn INCOMPATIBLE BLOCKSIZE RECSIZE VALUES FOR COMPACTION Meaning For compacted files the blocksize must be at least equal to the maximum record size 4 bytes for the record header 1 byte per 128 characters of the maximum record size Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn BLOCKSIZE SHOULD BE gt TO RECSIZE F FB Meaning With record format F or FB the blocksize must be at least equal to the record size Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn ILLEGAL BLOCKSIZE VALUE NEGATIVE Meaning The specified blocksize is negative 35 3 Messages and Return Codes Directory QL16 QL17 QL19 QL20 QL21 35 4 IFN IFN IFN IFN IFN Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn ILLEGAL BLOCKSIZE VALUE GREATER THAN TRACK CAPACITY Meaning The specified blocksize exceeds the track capacity of the media supporting the file Result The library file cannot be opened and an abnormal return code i
405. es and Return Codes Directory FUNCNAV OA05 ARS Catalog Management Dump Analyzer File Management FORMS GAC EXTENDED GCL GTWriter IDS II IOF 52 24 Function not yet implemented COBOL Status Key value 9L File assignment CATMODIF CAT ALOG Test of File Definition Currently Applicable File Space Management Utilities START Any Operation Close Remote Site Management WRITE REWRITE READ START EPBM JCRSWI JSTART VPUT The Automated Storage Management facility is not available on your site or the ARS job is not started Use the DISPLAY_ARS command to check ARS status or use the START_ARS command to start the ARS service job See the ASM 7 File Migration Administrator s Guide Access right not authorized on given site Contact the System Administrator An invalid function number has been specified for the requested procedure Use the standard DPAN macro Entity assigned to the ifn is not a file but a volume or a device Internal MEDIA has been specified in a PREALLOC or DEALLOC command A correct media list should be specified The activation mode or the specified mechanism is not available Check in your user program if the specified activation mode corresponds to the permitted mode or if the mechanism identifier is in the list of permitted mechanisms GAC is not available on the user s system The function requested is not available Attempt to
406. es to an open loop generation group A generation is searched for by the catalog access method but its computed absolute number is greater than 9999 Result The utility is not performed Action Either the specified relative number is wrong or check nogen characteristic of the generation group 47 A2 10UJ 8 9 Messages and Return Codes Directory DCT62 DCT63 DCT64 DCT65 DCT66 8 10 catalog name NOT DELETED CATALOG IS BUSY Meaning Deletion of a catalog file has been requested but cannot be performed because the catalog is being used by another job in SHARE mode and this job is waiting for a resource Result The utility is not performed Action Try again later catalog name NOT DELETED VALID FILES EXIST STILL EXIST IN CATALOG Meaning The requested catalog deletion CATDELET cannot be performed because the catalog contains a file entry containing a valid media list or because the expiration date has not been reached Result The utility is not performed Action Use CATLIST to check the catalog contents The FORCE keyword can be used in the CATDELET JCL statement in order to bypass the checking of the expiration date catalog name NOT DELETED SYSTEM ERROR Meaning Due to a system error the requested catalog deletion cannot be performed A following message DCT01 gives the reason for the error Result The utility cannot be performed Action Contact the Service Center
407. essage Processing SEND ENABLE DISABLE File not open due to lack of buffer space Reduce number of blocks per buffer DEFINE or increase size of control memory SIZE Segments of the user load module exceed the SIZE value The declared working set DWS of a step is underestimated to such a level that the WEAK call is performed Increase the DWS using SIZE and rerun the job There are too many pages locked in memory Increase the SIZE parameter of the EXEC_PG command Memory overflow Check SIZE statement if any The POOLSIZE is took small or the step SIZE parameter is too small for the given POOLSIZE Increase POOLSIZE and or SIZE Console unknown A message has been sent to a user who is not logged on An operator name has been specified which is unknown to the system Communication description error Communications description pointer does not point to an application output CD no data transferred Input CD referenced when OUTPUT specified or output CD referenced when INPUT specified Correct program 51 25 Messages and Return Codes Directory COMMUNBUN OAE3 COMNAV COMPREC RECEIVE Communications description pointer does not point to an application input CD no data transferred Communications unbundled 0A20 OA3F Telecommunications entities not available 00B6 Complementary record is accessed through a secondary CONFLICT 0460 51 26 Catalog Management COBOL RTP
408. ested to be cataloged is not or vice versa Error in initialization of a file Unstable index Index and primary file have different update dates Not in proper sort sequence Record does not agree with previous specification Error in JCL Statement Invalid parameter values have been defined for the sort Invalid return code Illegal logical device number Communication description error Job command read out of standard read mode Job command is to be re read Key mismatch between source program and preallocation Unexpected negative size has been found ARG error when calling math function Overflow for X gt 174 67 Overflow for X gt 174 67 Overflow for X gt 174 67 Argument is zero log undefined Argument is less than zero log undefined Argument is zero log undefined Argument is less than zero log undefined Argument is zero log undefined Argument is less than zero log undefined Result too small when ARG less than 260 Result too big when ARG gt 251 Result too small when ARG lt 260 Result too big when ARG gt 251 Result too small when ARG lt 260 Result too big when ARG gt 251 Second argument is zero Second argument is zero 47 A2 10UJ 47 A2 10UJ 1A12 1A13 1A14 1A15 1A16 1A17 1A18 1A19 1A1A 1A1B 1A1C 1A1D 1A1E 1A1F 1A20 1A21 1A22 1A23 1A24 1A25 1A26 1A27 1A28 1A29 1A2A 1A2B 1A2C 1A2D 1A2E 1A2F 1A30 1A31 1A32 1A35 1A36 1A37 1A38 1A39 1A3A 1A3B
409. eted or aborted Check why the main task is terminated User request for an abort A TTW ABORT command has been issued A utility running in interactive mode has received a QUIT command from a user after a break Abort caused by user request User rejection User unknown not found in catalog The specified user does not exist in SITE CATALOG Table entry or queue is vacant VFU error There is an incoherence in the VFU Abort step and check VFU with FPRU for an allocation made in batch mode VMM area not available No more IOF AREA free for step loading or for resuming a step with swap in IOF function Internal error Some permanent workspace has been lost damaged or destroyed Restart GCOS 7 with the CLEAN option and run the CRNETGEN utility 54 29 Messages and Return Codes Directory VMAOV VMAOVLD VOLLIM VOLOUT VQOV VTOCERR VTOCLIM 54 30 122E 0508 0028 BFAS Sequential Disk and Tape UFAS Tape File Management RWI UFAS and UFAS EXTENDED 185E UFAS EXTENDED 1234 1865 File Management 002B File Management Virtual memory area overflow Virtual memory area overload Volume limit reached WRITE End of volume reached For disk may have to allocate larger file File Storage and Requested space not available For disk allocate Tape Handling a smaller space For tape change volumes File Space Not enough space available in the specified Mana
410. f messages are output by GAC EXTENDED for GCOS 7 Releases V3A7 V3B7 V5 V6 These messages give statistical information about the behavior of programs that use the GAC component Pertinent Manuals GAC EXTENDED User s Guide neneeese 47 A2 12UF 18 1 Gac Message Descriptions GACO1 IFN ifn CONFLICT CNT n1 DEADLOCK CNT n2 GAC02 STEP 47 A2 10UJ Meaning Information message indicating for the specified file e the number of conflicts of access detected while accessing a CI of the file n1 e the number of deadlock situations detected while accessing a CI of the file n2 Result Too high a value for these counters may indicate an inadequate organization of the data base The message is printed each time a monitored file is deassigned INFO QUEUING CNT n Meaning Information message indicating the number of times two consecutive deadlocks appeared in the same Commitment Unit When such a situation arises a special mechanism called serialization is activated to avoid repetitive deadlocks 18 1 Messages and Return Codes Directory GACO3 GACOS5 GACO6 GAC07 GACO8 18 2 Result Too high a value for this counter indicates that several non cooperating jobs were running at the same time The message is printed when the last monitored file in the step is deassigned COMMITMENT NUMBER n NUMLOCK VALUE INCREASED TO x Meaning Information message indicating the effective length of the lo
411. f the file involved is given in most messages The explanations given in the following message descriptions assume that the file is referenced in the basic JCL statement ASSIGN the remarks are also valid when the file is referenced in a parameter of a step defining statement SDS such as INFILE OUTFILE OUTLIB etc Pertinent Manuals Catalog Management User s Guide c cccccccccccccecstecseetseenseesseenetenstenseenaes 47 A2 35UF ICL User Guid Cis E a Sines acetate todas ae hed ad eee R ORNS 47 A2 12UJ Message Descriptions efn SOME NAME IN PATH DOES NOT EXIST Meaning The cataloged file defined through its full path name after prefixing if any in the JCL statement ASSIGN does not exist in the catalogs searched one simple name at least is not present Result This error is usually detected at step initiation time the step cannot be started Action Check that e the file name specified is correct e the correct catalogs were searched 11 1 Messages and Return Codes Directory DS05 DS06 DS07 DS08 efn CATALOGUED FILE NAME SYNTAX ERROR Meaning A specified catalog file name in the JCL statement ASSIGN does not follow the catalog naming rules Result This error is usually detected at step initiation time the step cannot be started Action Check the file name specified efn FILE ACCESS RIGHTS VIOLATION Meaning The project under which the step is running has no right
412. f the message Main Operator and TDS Master MU68 TIMER REQUEST FAILED Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master MU69 TDS PROTOCOL ERROR Action None internal error in implementing the cooperative application protocol Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU70 TDS TABLE INCONSISTENCY Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU71 PMOS DYNAMIC COMMAND FOR MASTER CANNOT BE CREATED Action Ensure that the tdsname is not the same as a command name Delete dynamic commands created by other jobs Consult the Service Center Type of message Fatal Dump taken No Recipient of the message Main Operator MU72 ERROR IN STATIC ASSIGN ASSIGNMENTS REQUESTED IN TP7JCLBAC IGNORED Action None internal error Type of message Fatal Dump taken Yes 29 16 47 A2 10UJ MU and MV Messages Recipient of the message MU73 INTERNAL ERROR WHILE UNLOCKING USER RESOURCES Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master MU74 TDS WARNING DDMO0001 xxxxxxxxxx xXXXXXHXHKXXK RC XXXXXXXX Meaning An error detected by IDS is reported to TDS a dump is taken Refer to Messages and Return Codes Directory class DDM0001 NOTE
413. ficient linkage problem UNABLE TO CREATE SEGMENT Meaning A return code H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem PARALLEL SORT ASKED BUT NOT PURCHASED Meaning Parallel sorts are available if you have the MI for the Extended Sort Action If you have purchased the Extended Sort and you get this message report the problem to your Service Center UNABLE TO CREATE SEGMENT Meaning A return code H_SGCR is given Action The error could be internal to SORT but most frequently either too much memory is required for SORT SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem MEMORY FORCED TO 512K LIMIT FOR NOT PURCHASED SORT Meaning For the Basic Sort the memory limit is 512K bytes Action If you want to use more memory during sorts you must install the Extended Sort separate MI UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support NO DISK WORK FILE ASSIGNED Meaning NO WORK FILES SRTDEF implies an already assigned work file which is not supplied Action Correct the user program 42 15 Messages and Return Codes Directory TD04 03 TDO04 04 TD04 05 TD04 06 TD04 07 TD04 08 TD04 09 TD04 10 TD04 11 TD04 12 TD04 13 42 16 UNABLE TO
414. fies a point in the procedure code of the function This identification is intended for the Service Center The group aa bbbb can be repeated to indicate the stack of DBCS Functions called when the error is detected and reported The maximum depth is 6 47 A2 10UJ DDM Messages ERR Indicates a fatal ERRor WNG Indicates a Functional error a WarNinG U A 4 digit decimal number that is the code of the error This code is equal to or greater than the code of the DBCS message the latter case occurs when the same text that is the same message code is used to report several errors 47 A2 10UJ 9 3 Messages and Return Codes Directory Message Descriptions DDM00001 lt error localization gt UNEXPECTED RETURN CODE WHEN CALLING UFAS RC edited return code Meaning The UFAS primitives GETCI FREECI SETCI GETUL PUTUL CHECKCI OPEN CLOSE have not been executed correctly Abnormal return code Result In Batch IOF environment the step execution is aborted Action Contact the Service Center DDM00002 lt error localization gt UNEXPECTED RETURN CODE WHEN CALLING GAC RC edited return code Meaning The GAC primitives LOCKCI UNLOCKCD have not been executed correctly Abnormal return code Result In a Batch IOF environment the step execution is aborted Action Contact the Service Center DDM00032 lt error localization gt UNEXPECTED RETURN CODE WHEN CALLING
415. file One medium of the newest generation has been declared unavailable by the operator The file was not in the ready state when accessed by an I O operation Set the file in the ready state either using the same drive or a different drive and try the again job with the option MAM YES The hard copy on the AQUILA System Console is not available After correcting the problem use the SHC command to obtain the hard copy facility The media is not available after Canal Request replied to a system message Mount or Recover Refer to the previously cancelled system request Problem at remote site e g paper not available Media not available The disk containing the part of the file for which the transfer was not performed is not available Operator reply Cancel Request Volume not available Device declared not available by the operator Consult operator 47 A2 10UJ MGNAKIDC 1E31 MGNAKIDE 1E32 MGNAKNID 1E30 MISSREL 1033 MLAINTER 1E01 MODERR 1801 Exception Handling FORMS Physical I O Access System Nucleus VMM Internal MODVIOL 1444 RWI MOUNTERR 185A BFAS Sequential OPEN Disk Files UFAS and UFAS EXTENDED MSGERR 1811 Journalization RWI 47 A2 10UJ IONOP to RESIDENT Return Codes Message not acknowledged input data correct Message not acknowledged input data error Message not acknowledged no input data Missing relationship between file and index MLA inte
416. file cannot be accessed Action Rerun the program using another drive ifn I O ERROR CODE nnnn RC edited return code Meaning An I O error has been detected The I O completion code nnnn gives a detailed status of the error refer to the section on I O completion codes in this manual If the I O completion code is 92FF repositioning needed on tape the next message TS48 or TS49 indicates whether or not the repositioning was successful If the I O completion code is 9205 write failed for 18 track cartridge on a 36 track device the return code is WRVIOL and this message is followed by message TS47 Result Execution may proceed depending on e the type of error REPNEED and successful recovery e the user specified option for I O error processing ERROPT SKIP available in input mode only 47 A2 10UJ 46 TW Messages 46 1 General Environment Twos 47 A2 10UJ TW messages are produced by the Generalized Terminal Writer The messages are classified according to their code TWnn in ascending nn order The meaning of each message is explained The person who receives the message is also indicated Pertinent Manuals Generalized Terminal Writer User s Guide c oo 47 A2 55UU Message Format The messages consist of fixed fields which always contain the same information for a given message and variable fields whose content varies Here is an example of a GT Writer message lt R
417. for this ifn the user label of the file is invalid the schema date is different from the area date Update mode An abort has occurred during a split within a CA or a CI when the file was accessed previously The file is in an unstable state Recreate the file 52 21 Messages and Return Codes Directory READ START FLNMNAV OAOE Catalog Management CATBUILD Network Generation FLOATOV 121C FMVIOL 1622 UFAS EXTENDED FORBID 1700 1740 SBR System Nucleus Automatic Resource Manager FORCE 1014 FORMEND 0030 0032 FORMEND1 0031 Unit Record Driver WRITE Printer FORMEND2 0032 Unit Record Driver WRITE Printer 52 22 Input mode and access by key An abort has occurred during a split within a CA The file is in an unstable state Recreate the file File name not available The catalog name already exists on the specified media There is an invalid literal for the SAVE or LOAD parameter in the CRNETGEN command Correct the CRNETGEN command and rerun it Floating point overflow Function mask file mask violation Illegal CICA mask CI manager If you called the CI manager check the CI mask Otherwise contact the Service center Forbidden action Illegal probe setting Contact the Service Center 1 The objects are already connected 2 An attempt to delete a permanent Dimension Closing of user file has been forced End of form End of form 1 End of form FF1 reached DOF mo
418. fter Image s 3 the file on which After Image s have been successfully applied cannot be closed The file remains unstable in both cases Action Run the utility FILREST then ROLLFWD to reconstruct the file 47 A2 10UJ 39 5 Messages and Return Codes Directory RY45 ry46 ry47 ry48 ry51 39 6 FILE file _name DYNAMIC ROLLFORWARD SUCESSFUL NUMBER OF ROLLED FORWARD RECORDS number Meaning This message is printed in the SYSOUT of the recovery step It is sent for each file for which the dynamic rollforward was successful each time a step is processed by the recovery step Action None dynamic rollforward not sucessful for this step Meaning This message is printed in the SYSOUT of the Recovery Step This message is preceded by a message identifying the step and is sent when a TDS is rolled forward dynamically Further explanation of the error is given in the same SYSOUT by the messages RY43 RY47 RY48 or RY44 where applicable Some user files specified with the Deferred Update may remain unstable Action Run the utility FILREST then ROLLFWD to reconstruct the file dynamic rollforward cannot be performed for this step Meaning This mesage is printed in the SYSOUT of the Recovery Step None of the resources concerning segment s file s and internal structures needed to perform a dynamic rollforward can be created Action None dynamic rollforward failure read error on journal
419. fter Journal is not modified Action None Destination of the message JOR of the FILSAVE utility jasname efn SAVE DATE RECORDED IN THE JAS IS date Meaning The specified file journalized in AFTER mode has been successfully saved The date is given to the nearest millisecond in the format HH MM SS mSmSmS Month Day Year This save date is used as input to the ROLLFWD utility if you do not use the AUTOCYCLE option If you specify the AUTOCYCLE option for the JAS journal files will be automatically recycled after the save if the saved file was the oldest file known by the JAS 24 3 Messages and Return Codes Directory JP38 JP46 JP46 JP46 JP46 24 4 Action None Destination of the message JOR of the FILSAVE utility jasname efn ERROR IN SYSTEM DATE SAVE DATE CANNOT BE RECORDED Meaning The date on which the file was saved is earlier than the last jasname After Journal date The file save aborts Action None Destination of the message JOR of the FILSAVE utility jasname1 JOURNALIZATION CANNOT BE PERFORMED jasname2 JAS IS NOT AVAILABLE ON THIS SYSTEM 01 jasname1 JOURNALIZATION CANNOT BE PERFORMED jasname2 JADIR FILE DIRECTORY IS NOT ALLOCATED 02 jasname1 JOURNALIZATION CANNOT BE PERFORMED THE SYSTEM AFTER JOURNAL IS DAMAGED PLEASE CONTACT THE SYSTEM ADMINISTRATOR 03 jasname1 JOURNALIZATION CANNOT BE PERFORMED GR4 04 Meaning Message 01 At the
420. g trstssnb Response to LIST_COR_POOL cor pool DTLD NG 0 See CALL DISP POOL Procedure in TDS COBOL Programmer s Guide ATTRIB ACTSESNB FRZSESNB TRSTSESNB attrib actsesnb frzsesnb trstssnb Response to LIST COR POOL xcp cor DTLD NG 0 47 A2 10UJ TX Messages See CALL DISP POOL Procedure in TDS COBOL Programmer s Guide TX38 COR HIGH_SPW_NB MED_SPW_NB LOW_SPW_NB TIMER_SPW_NB cornm highspnb medspnb lowspnb timspnb Response to LIST_TDS_ SPAWN DTLD TX39 RPC SERVICE USED rpcused Response to DISPLAY TX spec tx KAO Seoseee tooo eee eee ee TDS tdsname hh mm ss Month Day Year TDS RPC STATISTICS Response to DISPLAY TDS RPC STATUS TX41 USED RPC TX COUNT rpctxnb USED RPC TPR COUNT rpctprnb MAX RPC TX COUNT mxrpctxnb CUR RPC TX COUNT currpctxnb WAITING TPR MEAN wtprmean RPC TPR ELAPSE TIME rpctprelps WAITING RPC TPR MEAN wrpctprmean Response to DISPLAY TDS RPC_STATUS TX42 MAX RPC SIMU COUNT max_rpcsimu CUR RPC SIMU COUNT cur_rpcsimu Response to DISPLAY TDS SIMUL TX43 WAITING TPR MEAN wtprmean Response to DISPLAY TDS STATUS TX44 XA SERVICE USED usexa Y N Response to DISPLAY TX spec tx TX45 TDS tds hh mm ss Month Day Year heading where heading is 1 CURRENT XA PARAMETERS 2 CURRENT XA PARAMETERS AND RM Response to 1 DTDSXA RM_STAT 0 2 DTDSXA RM_STAT 1 TX46 XA_RESYNC_DELAY xarsyncdlay Response to DISPLAY _TDS_XA
421. ge Main Operator and TDS Master MU65 NO SWAP AVAILABLE FOR TDS Meaning This message can concern the lt tdsname gt RECOV file or the lt tdsname gt SWAP file Action Run the TP7GEN utility Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master MU66 SWAP CAPACITY NOT COMPATIBLE WITH TDS TABLE Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master MU67 SWAP FILE TOO SMALL XXXX SESSIONS MAX xxx CYL MISSING Meaning This message appears only for VBO swap files which are not large enough to support the generated configuration NOTES 1 The SESSION MAX number gives the maximum number of contexts that can be allocated 2 One swap context is needed for each correspondent TM XCP2 and VIRTUAL terminals and for each session of a POOL XCP1 and DUMMY 3 Furthermore for each correspondent several swap contexts may be needed For each occurrence of a special purpose transaction such as break and logon a swap context is allocated and kept until the end of the transaction 4 A correspondent abnormally disconnected will keep all its previous allocated swap contexts Action Either reallocate a new file with TP7PREP or update the Network Generation with NETGEN Type of message Warning 47 A2 10UJ 29 15 Messages and Return Codes Directory Dump taken No Recipient o
422. ge TDS Master MU86 ORACLE INITIALIZATION FAILED Meaning The SM containing ORACLE is not loaded or the correct library is not specified in the JOBLIB statement Action Ensure that the SM containing ORACLE is loaded otherwise ensure that the correct library is specified in the JOBLIB statement Type of message Fatal Dump taken Yes 47 A2 10UJ 29 19 Messages and Return Codes Directory MU87 MU88 MU89 MU90 29 20 Recipient of the message TDS Master ERROR DETECTED IN ORACLE TDS PROTOCOL Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master UNSUCCESSFUL RELEASE OF DYNAMIC PMOS COMMAND SWAP Meaning Internal error at job termination Action None Type of message Warning Dump taken No FILE TOO SMALL XXXX SESSIONS MAX XXXXXX BLOCKS MISSING Meaning This message appears only for GCOS 7 V5 FBO systems The size of the swap file s is too small in relation to the number of terminals defined at NETGEN or in the STDS Action The information provided number of missing blocks to support the configuration and the number of possible users for the file enables the administrator to re allocate a new file by using the TP7PREP utility or update the STDS Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master TP7GEN NECESSARY DUE TO UNSUCCESSFUL SYSTEM FILE RECOVERY Me
423. gement volume or media list Verify the command and Utilities free some space Volume limit Partial transfer because end of volume was reached in mode EOV The end of the last volume mounted has been reached Partial volume mounting Information only Outside bounds of volume MOUNT 1 and the address given for access is out of the range of the volume Requested space greater than the amount allowed by Quota Control on the selected volume s Error in the vToc File Storage and The VTOC is damaged Tape Handling Save and Restore An attempt has been made to save a volume which is in an unstable state Check INVOL Test of Spare Disk Non standard Volume Table of Contents Tracks Investigate using VOLCHECK utility vToc limit reached System Disk Error in VTOC file labels No more room in VTOC or no more file labels in VTOC 47 A2 10UJ RESNAV to YETALLOC Return Codes File Storage and The VTOC is full If there is any free space on Tape Handling WALIM 002F the disk run VOLSAVE or VOLPREP to extend the VTOC with the options SHORT and VTOCSIZE new size followed by VOLREST Record length greater than ALN value Truncated COBOL Status Key value 9U BFAS Sequential READ Disk Files BFAS Tape Files READ Catalog Management READ Dump Analyzer Network Generation UFAS and UFAS EXTENDED Disk Files All Organizations Unit Record Driver Diskette READ GET WAOV 12
424. gment of a sharable module and the start assign value Relink with a valid start assign value Administrative Utilities Programmatic Interface Attempt to create a wrong catalog structure CATALOG OPENS CLOSES STOW CHNAME RTSPCE BUILD OPEN The user does not follow the hierarchy rule and for example tries to catalog a directory under a file Data block not in the expected state File damaged as result of system error during updating OWQ tables are not coherent Contact the Service Center BAM overflow Depends on environment 47 A2 10UJ BDELERR BILLUNKN BKSIDOV BKSNAV BKSOV BLKBUSY BLKFERR BLKSZERR 47 A2 10UJ 1866 1027 122D 0A1B 122C 0203 System Nucleus Internal 1861 BFAS Sequential Disk Files Unit Record 1862 BFAS Sequential Disk Files BFAS UFAS Tape Files File and Device Management File Management Journalization Unit Record Driver Diskette ABNCCAD to DATALOSS Return Codes Start delimiter error Billing unknown not found in catalog VMM WRITE GET OPEN OPEN File Storage and Tape Handling System Disk OPEN Backing store ident overflow Backing store not available Backing store overflow The referenced block is active A process is accessing a block of an internal file which is already active If the block is deleted in Basic Mode Access a pointer must be specified Contact the Service C
425. gram SRTDEF INPUT RECORD LENGTH IS NOT gt 0 Action Correct the user program SRTDEF REPORT IS gt 01 B Action Correct the user program SRTDEF COLL_SEQ IS NOT 1 Action Correct the user program 42 5 Messages and Return Codes Directory TDO1 76 TD01 77 TDO1 78 TDO1 79 TDO1 80 TDO1 81 TDO1 82 TDO1 83 TDO1 84 TDO1 85 TDO1 86 42 6 SRTDEF DUP_REC_SEQ MUST BE ZERO OR F Action Correct the user program SRTDEF DUP_REC_DEL IS NOT ZERO Action Correct the user program SRTDEF IN_FD IS NOT NULL Action Correct the user program SRTDEF OUT_FD IS NOT NULL Action Correct the user program SRTDEF INVALID KEY_PTR Meaning The user program must be corrected KEY XXXXX INVALID POSITION Meaning The user program must be corrected XXXXX rank of the incorrect field KEY XXXXX INVALID SENSE XXX XX rank of the incorrect field Action Correct the user program KEY XXXXX LENGTH IS NOT POSITIVE XXX XX rank of the incorrect field Action Correct the user program KEY XXXXX INVALID TYPE XXX XX rank of the incorrect field Action Correct the user program KEY XXXXX INVALID LENGTH FOR TYPE XXX XX rank of the incorrect field Action Correct the user program SRTDEF INVALID COBOL KEY COLLATING SEQUENCE Action Correct the user program 47 A2 10UJ TDO1 87 TDO2 01 TDO2 02 TDO2 03
426. gram Checkout Facility cannot retrieve the semaphore descriptor to the asynchronous table Contact the Service Center Erroneous semaphore pointer Internal error Illegal station IO request 47 A2 10UJ INDERR 181A Any File Organization GCL Job Management System Nucleus System Trace INDOUT 0802 Availability Control Job Management PASCAL RTP System Nucleus 47 A2 10UJ DATANAYV to IOFAIL Return Codes Index error File Management System or GPL error in retrieving assignment Load Module Loader Loader VMM Dynamic Addresser Collector GAGS Setting of Status Setting of Switch Sequence Dynamic Addressing Loader parameters If this is a system error inform Service Center The specified index is greater than the maximum number of elements in the list or less than 1 Re issue the command with a valid index value There is an inconsistency between the data structures PGCS and PCS and the number of segments found during the loading of a step The load module could be damaged so link it again Internal system error Contact the Service Center Incorrect index specified for VMF file e g INDIAC or the index specified by LASTIDX does not correspond to the preceding block Contact the Service Center Index of a sharable module out of range Relink with a correct USEDSM list The index specified in the Trace message is not a page index If this message
427. h does not exist A request has been made to modify a generation and the SITE CATALOG does not exist A file comes from two different catalogs and the values given for the SHARE or JOURNAL parameter are different A file has the same efn and volume list as a cataloged file but FILESTAT is neither CAT nor SUBCAT The oldest and newest generations of a file have been assigned simultaneously close loop only A subcatalog and a catalog have the same efn but their media lists are different Two files have the same efn their media lists are partially identical but the value given for FILESTAT is different Two files are partially identical as they have a common set of media names A homonym cannot be distinguished 57 3 File Processing Preparation TBL NI DFPRE 2 BLKSZERR DFPRE 2 DATALIM DFPRE 2 FUNCNAV DFPRE 2 IFNERR DFPRE 2 MDERR DFPRE 2 OPTERR DFPRE 2 SPACENAV 47 A2 10UJ Block size greater than 32 K bytes not supported by PIAR A disk file cannot be extended because no increment size was defined for the file or no space is available for the extension Set in the following cases An extension has been requested but MOUNT is not ALL An extension has been requested but the file cannot be found on the specified volume An invalid ifn has been specified The number of volumes on which the file resides exceeds the maximum i e 10 Allocation unit is not a cylinder track or file No spac
428. han 57 53 underflow Argument is almost zero Negative argument Negative argument or zero ARG almost a negative integer Undefined ARG less than 200 underflow ARG less than 200 underflow ARG less than 200 underflow ARG less than 200 underflow ARG less than 200 underflow ARG less than 200 overflow ARG less than 200 overflow Result gt 10 252 overflow power Result gt 10 252 overflow power Result gt 10 252 overflow power ARG gt 175 36 overflow cosh ARG gt 175 36 overflow cosh ARG gt 175 36 overflow cosh ARG gt 175 36 overflow ARG gt 175 36 overflow sinh ARG gt 175 36 overflow sinh ARG gt 175 36 overflow sinh real ARG gt 2 19 PI complex tanh real ARG gt 2 50 PI complex tanh real ARG gt 2 100 PI complex tanh imag ARG gt 2 19 PI complex tan imag ARG gt 2 50 PI complex tan imag ARG gt 2 100 PI complex tan ARG 1 overflow complex arctan 47 A2 10UJ 1A77 CDATANOV 1A78 CQATANOV 1A79 CSATNHOV LATA CDATNHOV 1A7B CQATNHOV 1A7C SATNHUN 1A7D DATNHUN LATE QATNHUN 1A7F MATHARG 1B00 1BFF USERRJCT 1C00 1DFF STATEERR 1C01 NOTOPEN 1C02 WRONGORG 1C03 NOTOPENS 1C04 NOCURREC 1C05 WRONGPMD 1C06 NOLOCK 1C07 OPEN 1C08 OPENS 1C09 NOINIT 1COA NOTOBS 1C0B EXHAUST 1C0C WRONGDV 1C0D INVCHAR 1C0E FVNOTCUR 1COF WITHDETL 1C10 WITHREL 1C11 WITHSYN 1C12 BADOWNER 1C13 OUTNAV 1C14 FORCE 1C15
429. hat stores information in a catalog e g CATALOG CATMODIF It indicates that there is no more space available in the catalog 47 A2 10UJ 5 1 Messages and Return Codes Directory CG03 CG03 CG03 CG04 CG04 cG05 5 2 Result Some of the catalog information may be unstable Action To check if any information is unstable list the catalog If any unstable records are found run the CATCHECK utility Then extend the catalog if required using the CATEXTD utility ATT INCORRECT CATALOG FILE NAME or efn NOT FOUND ON MEDIA vsn or ifn efn NOT FOUND Meaning A catalog specified in an ATTACH statement has not been found on the specified volume Result ATTACH is not performed Action Check the volume name specified in the ATTACH statement or check the volume contents using the VOLCONTS utility ifn efn IS PROTECTED AND NO ACCESS RIGHTS EXIST Meaning An attempt to use a protected catalog on a system which is not protected A catalog with a non empty access list has been referenced in an ATTACH statement in a job that is running on a system where no access list has been provided to the SITE CATALOG non protected system Result ATTACH is not performed ATT TRY LATER CATALOG IS BUSY Meaning This message appears on a coupled system if the named catalog is accessed on one site but is to be used on the second site Action Check the state of the catalog on the other machine
430. he present interactive session When an assigned library is cataloged the contents of the attached catalogs cannot be modified Result ATTACH command is not executed Action List the assigned libraries using the GCL command DISPLAY_PROFILE DP Deassign the libraries using the appropriate GCL command BIN SL MWLIB CU LM SM or BIN SL MWINLIB CU LM SM Resubmit the ATTACH command Messages and Return Codes Directory 11 6 47 A2 10UJ 47 A2 10UJ 12 DU Messages General Environment Certain DU messages are produced by the DYNSAVE utility and others by the associated server The error messages take the following format HH MM SS DUxx MESSxxx Text message value where HH MM SS transmission time of the message Hours Minutes Seconds DUxx xx Indicating the number of the module transmitting the message The dynamic save modules have the numbers 90 to 99 MESSxxx xxx is a message number 1 n without spaces in the module indicated There is no common message n The text of the message may be specified Text message see above value either a value given by the text or a Return Code This may not be applicable Two types of messages are given below by originating module e messages which provide information end of save etc e error messages In the second class a message has a rank in its originating m
431. he return code Result The linkage has been performed Action Contact the Service Center LK32 03 ERROR 231 PRTLIB IS NOT A SL LIBRARY Meaning The library specified in PRTLIB parameter is not of SL type Result Linkage is not performed Action Check the JCL statement LINKER LK41 01 UNABLE TO WRITE ON SYSOUT RC edited return code Meaning The linker failed to write a record in the report file As a general rule such a message is very uncommon when the standard SYSOUT file is used When a permanent SYSOUT file is used the most common case is RC mnemonic DATALIM the end of file has been reached in that case your permanent SYSOUT is full When the PRTFILE parameter is used the file is processed in append mode Result Some linkage may have been performed consult the message LK00 in JOR and the linkage report 26 2 47 A2 10UJ 27 LH Messages General Environment LH messages are produced by the Storage Manager Pertinent Manuals Administering the Storage Mander ccc ccccccccccccecseetseetseetscenseenseenetenstenaes 47 A2 36UF LH02 ron WAITS FOR TEMPORARY FILE SPACE LH04 WAIT 47 A2 10UJ Meaning The job is waiting for temporary file space on a list of volumes which contains at least one resident volume Action Wait for the space to become available or issue a break command BRK to display the LH04 message see below You can also change one or several resident disks from NTEMP
432. he file s characteristics Internal error Inconsistency between parameters for opening the XCP2 workstation in warm mode don t match those of the previous session Either the swap file or the PPCLOG file is not the correct Restore the correct file or restart TDS in cold mode Refer to the CPI C XCP2 User s Guide Any Except OPEN File organization access mode or record OPEN Main Console Driver addressing method conflict RECFORME U and locate foreign processor Copy error Hardware problem on hard copy device Inform Service Center The COPY parameter contains an invalid value 51 27 Messages and Return Codes Directory COPYUNKN 101B COUNTERR 181B BFAS UFAS Tape SBR System Output System Trace Copy unknown on volume Check fails on number of records on a media READ Collector Number of blocks read does not correspond to the number written in the EOV or EOF label There is an error in the record sequence on SBR file Contact your Service Center After a warm restart inconsistencies were detected at output processing that is there is a logical incoherence in the sorting process The index of the page in the semaphore message does not correspond to the value of the index in the trace buffer If such error messages persist stop and restart the collector COUNTLIM 0025 Count value limit has been reached during the operation COBOL Status Key value 00 Buffer Management
433. he most common user error is RC EFNUNKN the report file specified has not been found on the indicated volume Result The compiler proceeds but the listing is produced in the standard SYSOUT The listing will be deleted after being printed Action Correct the JCL if relevant or contact the Service Center 31 1 Messages and Return Codes Directory PASO2 PASO3 PASO4 PASOS5 PASO6 31 2 OPEN OPEN OPEN PRTIFILE LISTING WILL BE ON SYSOUT RC edited return code Meaning The PASCAL compiler failed to OPEN the permanent report file The reason is given by the return code The most common user error is RC EFNUNKN the report file specified has not been found on the indicated volume Result he compiler proceeds but the listing is produced in the standard SYSOUT The listing will be deleted after being printed Action Correct the JCL if relevant or contact the Service Center INLIB RC edited return code Meaning The PASCAL compiler failed to open the file containing the source program s to be compiled the file can be either a library or an input enclosure The reason is indicated by the return code The most common return code is EFNUNKN which indicates that the library specified in the INLIB parameter of the JCL statement PASCAL has not been found on the specified volume Result No compilation is performed Action Correct the JCL if relevant or contact the Service Center
434. he user program USER RECORD IS TOO LONG Meaning The sort record size exceeds 15000 bytes Either the user record is too long or too many keys overlap Action Correct the user program INSUFFICIENT MEMORY SIZE Meaning The size parameter is too small according to the other parameters Action Correct the user program UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF 42 13 Messages and Return Codes Directory TDO3 TDO3 TDO3 TDO3 TDO3 TDO3 TDO3 TDO3 TDO3 42 14 UNABLE TO CREATE SEGMENT Meaning The node segment record segment used for sorting cannot be created A return code H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem UNABLE TO CHANGE SEGMENT SIZE Meaning The node segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO CHANGE SEGMENT SIZE Meaning The generated code segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO MODIFY SEGMENT ATTRIBUT
435. hen abnormal conditions or exceptions have been detected Messages EX01 and EX02 indicate abnormal conditions detected by hardware or firmware message EX03 indicates abnormal conditions detected by software Message Descriptions Some exceptions are automatically handled by the software Exceptions that usually correspond to error conditions detected during the execution of an instruction are reported in the user s Job Occurrence Report as an exception message with the following format 16 1 Exception Messages EXnn EXCEPTION class type exception identification exception parameters in TASK task name AT ADDRESS segmented address When an exception message is encountered in the JOR e Ifthe exception arose in user code as indicated by the address given in the exception message the operands of the statement being executed should be checked e Ifthe exception arose in code not written by the user the parameters in terms of value and length given to the activated procedure should be checked 47 A2 10UJ 16 1 Messages and Return Codes Directory EX01 EX02 EX03 EX04 16 2 16 2 EXCEPTION class type exception identification exception parameter IN TASK taskname AT ADDRESS segmented address Meaning Indicates that an exception condition has been detected during the execution of the instruction at the specified address Exception conditions are usually the result of a user or system error
436. hest key value Private segment information excess Internal splitting Operation has not been performed because of abnormal execution conditions Function not performed nothing destroyed explanation already provided Request not run by the operator Request not fully performed unpredictable results may occur Function not performed Some entities are damaged The object of the request is still working Request deleted because one or more ISD s are pointing to the segment Illegal base register The referenced block is active Attempt to change existing record key Record key is lower than that of the previous record Request not performed due to shutdown Underflow liable to occur Administrative Utilities Programmatic Interface Distributed System Administration and Control Request has occurred too late Duplicate name Duplicate entities New record key duplicates existing record key Duplicate user Duplicate station Duplicate relationship Data transfer logical path inhibited Object has no lower level Initial amount of data input but data limit not reached gain of data Data limit reached but initial amount of data not input loss of data Record not found or has been deleted At least one item of the output is wrong At least one macro statement has been lost Macro processing is restarted at the next statement 55 5 Messages and Return Codes Directory 0460 CONFLICT 0480 04BF FAILURE 0481 IOFAIL 0482 IOACT 0484
437. ice not available Media not available down still used Terminal not available down Function not yet implemented File not available Item in a list not available Input reader not available File copy not available Buffer not available Process not available Timer not available Option string not available File name not available Space not available An entity is already assigned to the internal file name A JCL DEFINE has already referenced the IFN Error option not available Generation not available No segment available Resource not available Shareable module not available Data not available Secondary index not available CI differed update not available VMM area not available Backing store not available Control Interval not available File cataloged as migrated out Message path not available 55 7 Messages and Return Codes Directory 55 8 0A20 0A3F 0A21 0A22 0A30 0A31 0A32 0A33 0A40 0A41 OAEO OAFF OAEI 0AE2 0AE3 0B00 0C00 0D00 0D00 1000 10FF 1001 1002 1003 1004 1005 1006 1007 1008 1009 100A 100B 100C 100D 100E 100F 1010 1011 1012 1013 1014 1015 1016 1017 1018 COMNAV DNODNOP DBMXNOP MBXSAT DNODSAT DBMXSAT DAPPLSAT SPCNTNAV QFNAV UNBUNDL RPWUNBUN SRTUNBUN COMUNBUN VACANT NVACANT DEADLOCK RESIDENT ENTYUNKN TSKUNKN TPUNKN FLABUNKN OPSCUNKN EMUUNKN PCSUNKN GEXTUNKN OGENUNKN LABUNKN SCATUNKN OBJUNKN OBJIUNKN
438. id_1 evid_2 STRING str_vl str_off XRON 1k_xron EVID evid_1 evid_2 STRING str_vl str_off EVID evid_1 evid_2 XRON 1k_xron STRING str_vl str_off XRON 1k_xron EVID evid_1 evid_2 STRING str_vl str_off XRON 1k_xron Meaning The message displays the attributes of active filters in the trace domain The meanings of variables are evid_1 the minimum accepted value for the evid range filter evid_2 the maximum accepted value for the evid range filter str_vl the string filter pattern hexadecimal value str_off the string filter pattern hexadecimal displacement from 0 Ik_xron the XRON filter value Action None tdom_1 tdom_2 tdom_1 Meaning The message displays the list of names of the system trace domains The first message is issued if 2 domain names are to be listed on one line The second message is issued if one domain name is to be listed tdom d1 is the first system trace domain name tdom id2 is the second system trace domain name Action None 44 17 Messages and Return Codes Directory 44 18 47 A2 10UJ TS24 TS43 TS47 47 A2 10UJ IFN IFN 45 TS Messages General Environment TS messages are produced by the BFAS UFAS Sequential Tape File Access method In each message the user is provided with the internal file name ifn of the file the message is related to Pertinent Manuals BRAS User s G idesss ienei ose oot conten T
439. ifferent device or a device that does not exist An assign which is not temporary has been attempted for a work file A work file has been assigned with LABEL NSTD or LABEL NONE A concatenated file has been assigned in a mode which is not permitted Two MWLIB or MWINLIB commands each requesting exclusive mode have been specified for the same efn An incorrect value has been specified for the SHARE ACCESS or FILESTAT parameter An attempt has been made to allocate a cataloged file without specifying the CATNOW parameter Overriding journal options by a DEFINE is forbidden in this case The NBEFN and FIRSTVOL options are incompatible MOUNT ALL is mandatory with the NEWVERS or the RELSPACE parameter ACCESS SPWRITE or ACCESS WRITE is mandatory with the NEWVERS or the RELSPACE parameter If the NEWVERS and the FIRSTVOL parameters are specified together the last parameter to be specified must be 1 The FIRSTVOL parameter has a value which is more than the value specified for the LASTVOL parameter The FIRSTVOL parameter has a value which is more than the total number of volumes specified An attempt has been made to assign a cataloged file which does not have a volume list The maximum number of ifns has been reached for this process group The maximum number of assigned files has been reached for this process group An attempt has been made to assign a file with 4AVA2 NBU without the device class specificat
440. ifn efn CATALOG ACCESS RIGHT VIOLATION Meaning An ATTACH statement refers to a catalog but the project under which the job is running has no WRITE access on this catalog Result ATTACH is not performed 47 A2 10UJ CG0O6 CG07 CGO9 CG10 cG10 CG11 47 A2 10UJ CG Messages catalog name CANNOT BE LOCKED IOCC completion code UNLOCKED RC edited return code Meaning This message may appear on a coupled system when an utility that wants to lock unlock the named catalog cannot lock unlock it Result The return code indicates the reason for the failure catalog name ON volume name IS BUSY CHECK OTHER MACHINE STATE Meaning This message appears on a coupled system if the named catalog is accessed on one site but is to be used on the second site Action Check the state of the catalog on the other machine SYS CATALOG IS CONSIDERED AS NOT VALID Meaning This message occurs at system initialization time when catalog tables are initialized the SYS CATALOG is protected while the SITE CATALOG is not protected Result The SYS CATALOG is considered invalid No information about it is kept in system tables UNABLE TO INITIALIZE catalog name FILE FOUND TWICE ON RESIDENT or UNABLE TO INITIALIZE catalog name edited return code Meaning This message occurs at system initialization time when initialization of the catalog tables has failed The reason for the failure is indicated by
441. ile the first file block read is not a FICB block AL 3 IOFAIL When initializing access to the SYS KNODET file the first file block read is invalid AL 4 ARGERR The requested function is unknown it is neither READ nor DUAL 4 IOFAIL DUAL 5 ARGERR DU 57 22 AL 5 EFNUNKN WRITE The file block read is invalid There are more than 16 extents found in the SYS PMF files No SYS PMF nor JCSJ file was found 47 A2 10UJ 58 TDS Return Codes in More Detail 58 1 Tpr Transaction Abort Codes NOTE Bracketed codes 1234 may be returned to the user or may appear in a dump codes where no USE was specified are returned only in the TPR Return Code Return Code Explanation Number 0804 ADDROUT Address out of bounds 1853 ARGERR COBOL SYMBOLIC QUEUE within the output CD or device name separated by 1C syntax 1501 ARVIOL Access right violation WRITE while in statistical read requested 1E04 BREAK Break request issued from a terminal 1206 BUFNBOV TDS buffer pool overflow Switching to Before Journal is not possible Increase buffer pool size or add before journal 00D3 CANEVT Transaction cancelled 120F COUNTOV The transaction requires more locked pages than declared at TDSGEN refer to MAXIMUM NUMBER OF LOCKED PAGES in the TDS section 1223 ENTRYOV Entry overflow number of entries exceeds limit try CLOSE DEASSIGN again 1COB EXHAUST End of file already signalled 1228
442. ile cannot be opened and the abnormal return code BUFNAV is set by the access method Action Correct the program or specify a positive value for the NBBUF parameter in the DEFINE statement ifn INCOMPATIBLE NOFORCE CKPTLIM VALUES Meaning Incompatible options were indicated for end of volume processing NOFORCE means no automatic volume switching with end of volume visibility Result The file cannot be opened and the abnormal return code CONFLICT is set by the access method 47 A2 10UJ SQ Messages Action Remove the CKPTLIM EOV parameter from the JCL statement DEFINE if present or contact the Service Center ifn PROCESSING MODE REVERSE NOT SUPPORTED Meaning The processing mode REVERSE is not supported in the current release Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn ILLEGAL BLOCKSIZE VALUE 0 OR NEGATIVE Meaning The specified blocksize is either negative or zero A zero value for blocksize may correspond to the following situation No BLKSIZE parameter provided in the H_FD primitive by a user program written in GPL Result The file cannot be opened and the abnormal return code BLKSZERR is set by the access method Action This type of message is related to checking the consistency of file characteristics Remember that these characteristics are provided as follows e in the l
443. iler FRTP FORTRAN Run Time Package FXFER File Transfer GPL GCOS Programming Language HEADR Procedure Header HPR Printer Handler HURTA Retrieval from SYS URCINIT HURTM SYS URCINIT Loading and Updating IFAS Italian File Access Method INIT Initial System Loading INSTL Create Installation Functions ISIP Initialization IOF Interactive Operation Facility JACNT Job Accounting JAGEN After Journal Generalization JLOAD Job step Loader for SCP JOBM Job Initiation and Termination Management JRAFT File After Update Journalization 50 5 Messages and Return Codes Directory 50 6 JRNAL Journalization JTRA Translation of JCL Statements KOMWT KOM Building LBMNC Library Maintenance LEVEL Level Functions LOAD Process Group Loader MACPR Macro Processor MACSY System Nucleus General Services MCFCO Copy queued file to build MCF MERGE MERGE Utility MESSG Message Catalog Generator MIKRO Microform Building MIZOP Interactive Debugging Aid MTRA JCL Tables Generator NADM Network Administration NASF Network Administration Storage Facility OPRTR Operator Message Handler COMM OWRT Output Processing Output Writer Utilities PATIN Patch Insertion PG Process Group PIAR Hardware Error Recovery PIO Physical I O PRLOG Performance Log Analyzer PSCL PASCAL Compiler PSRT PASCAL Run Time Package QCTL Communications Queue Control RBF Remote Batch Facilities RDN Program Reading by Compiler before compilat
444. iles shared by two TDSs or a Batch step and a TDS Result In Batch environment the step execution is aborted Action Update the JCL statements DDM00444 lt error localization gt IDS LABEL STRUCTURE DAMAGED LABEL MUST BE REBUILT THROUGH H_DBUTILITY Meaning The assigned file is an IDS II file but the file labels do not have the correct structure Result The step execution is aborted Action Check the IDS II label using the PRINT LABEL command of the H_DBUTILITY and recover it using the PATCH LABEL command Contact the Service Center if necessary DDM00448 lt error localization gt NO BEFORE JOURNAL BEING ACTIVE THE DATA BASE IS NOT ROLLED BACK Meaning The data base cannot be rolled back because the Before Journal is not active for this data base or absent for one or more IDS II files Result In Batch environment the step execution is aborted Action Contact the Service Center or modify the JCL statements DDM00449 lt error localization gt ERROR S ENCOUNTERED DURING IDSOPT ANALYSIS PLEASE REFER TO MESSAGES ON JOR Meaning Errors occurred during IDSOPT analysis consult the appropriate messages on the JOR to obtain more explanations Result In Batch environment the step execution is aborted Action Correct the IDS II options in IDSOPT file 9 21 Messages and Return Codes Directory 9 22 DDM00512 lt error localization gt SYSTEM INCONSISTENCY Meaning This message usuall
445. imum size No more devices No more links Stack overflow Ring 0 stack overflow Ring stack overflow Ring 2 stack overflow GCOS 7 V3A only Ring 3 stack overflow Count overflow Overflow of the directory part of a queued file ECB overflow 55 9 Messages and Return Codes Directory 1212 WAOV 1213 ECPOV 1214 SFNBOV 1215 NVOLOV 1216 FILEWSOV 1217 CMWSOV 1218 CATOV 1219 TABOV 121A PTIMEOV 121B UPDIDXOV 121C FLOATOV 1220 BAMOV 1221 ERLMOV 1222 BSWSOV 1223 ENTRYOV 1224 ISDOV 1225 PRTYVIOL 1226 EPTOV 1227 ALTRKOV 1228 FILEOV 1229 PAGEOV 122A PDIOV 122B PLDSTKOV 122C BKSOV 122D BKSIDOV 122E VMAOV 122F SUMOVERR 1230 QUOTAOV 1232 SQOV 1233 PQOV 1234 VQOV 1235 TQOV 1400 16FF ACSSVIOL 1401 HYVIOL 1402 TMRVIOL 1403 CLOSVIOL 1404 LEVVIOL 1405 PSWVIOL 55 10 Work area overflow Event completion procedure overflow Too many subfiles opened Overflow in the number of volumes File working set overflow Central memory working set overflow No more space in catalog No more space in table Process timer overflow Overflow in the maximum number of updatable indexes Floating point overflow BAM overflow Error limit overflow abort the currently running procedure System backing store working set overflow Overflow in the number of entries Overflow in the number of ISDs requested Priority violation Entry point table overflow No more alternate track available File overflow after record
446. in the RELEASE command or check that the specified job has been entered into the system TIMER REQUEST UNKNOWN Meaning System error a time out event occurred concerning a job step unknown to the system Action Contact the Service Center Unable to ASSIGN lm lib name edited return code Meaning Message issued at Im loading time Result Fatal for current action Action Analyze return code value 1m name 1lm 1ib name NOT FOUND Meaning Message issued at step initiation time when e either the load module to be executed cannot be found in the specified library e or the specified library containing the load module to be executed cannot be found on the volume Result The step is aborted Action Check the JCL statement STEP VOLUME CONTAINING lm lib name NOT AVAILABLE This message is issued at step initiation time when the operator refused to mount the volume to support the library containing the load module to be executed The reason for the problem may be e user error on volume specification the indicated volume does not exist e the volume is not available e g broken UNABLE TO OPEN 1m lib name RC edited return code Meaning System error The message is issued at step initiation time when the library containing the load module to be executed cannot be opened The return code gives the reason for the error Result The step is aborted Action Contact the Service Center 23 3 Messages and Return
447. ing The step requests a disk and gives a specific drive in the JCL ASSIGN statement This is not allowed for MIRROR disks Result The step cannot be started Action Correct the JCL ILLEGAL USE OF MIR DV ALLOCATION OPTIONS Meaning Illegal allocation of a volume by a job Result The step cannot be started due to a system error Action Save the SYS LOGC and SYS SWLOG files domain DVMGT and contact the Service Center DAMAGED TABLES Meaning System error Action Contact the Service Center NO NON STANDARD VOLUME IN THE CONFIGURATION Meaning The command refers to a non removable non standard disk and none exists Result The step cannot be started Action Check the command and correct it as necessary BOTH COPIES OF MIRROR VOLUME volnm OF DEVCLASS dvc ARE MISSING Meaning During volume allocation both disks of the mirrored pair volnm are inaccessible HELD or STANDBY and the Mirror Disks mode is AUTOMATIC Result The allocation is rejected with RC DVIDFBID Action Set your disks to IN READY and restart the job 47 A2 10UJ DV Messages DV41 THE PRIMARY COPY OF MIRROR VOLUME volnm OF DEVCLASS dvc IS MISSING Meaning During dynamic volume allocation the primary disk of the mirrored pair volnm is unknown never recognized Result The allocation is rejected with RC DVIDFBID Action Set your primary disk to IN READY and restart the job Or issue the command UNPMIR KEEP SECO
448. ing this SM is actually specified in the JOBLIB statement 47 A2 10UJ MU and MV Messages Type of message Fatal Dump taken No Recipient of the message Main Operator MVO01 DPF SYSTEM ERROR Meaning Internal error in DPF Action Consult the Service Center Type of message Warning Dump taken Yes Recipient of the message TDS Master MV02 UNABLE TO SEND A CATALOGUED MESSAGE OR PMOS RESPONSE Meaning TDS fails when sending a message to the master using DOF 7 PO Action Consult the Service Center Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master Mmv03 SUPERVISION INITIALIZATION FAILED AT RESTART Meaning Action A system error prevents the supervision facility from starting but does not prevent TDS from executing Type of message Warning Dump taken No Recipient of the message TDS Master MV04 UNABLE TO TRANSLATE A MNMC PMOS COMMAND INTO TDS COMMAND Meaning This incident does not prevent the command from being executed Action Consult the Service Center Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master 47 A2 10UJ 29 23 Messages and Return Codes Directory MV05 MV06 MV07 MV08 MV09 29 24 SYSTEM ERROR IN PROCESS MAP UNMAP MECHANISM Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator an
449. inter SAM integrity error Segment type error P number error Argument error Protocol error Mounting request error Outside bounds of volume Record size error Record format error Block format error Block size error Error in queued file directory Assignment is denied Error in the VTOC Start delimiter error Intermediate delimiter error End delimiter error Error in the process identification User fatal error in a job User bug error in a job Incorrect object type Incorrect relationship type Data block not in the expected state Address in description incorrect Name error Tree name error 55 13 Messages and Return Codes Directory 55 14 1872 1873 1874 1875 1876 1877 1878 1879 1880 188F 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1A00 1AFF 1A01 1A02 1A03 1A04 1A05 1A06 1A07 1A08 1A09 1A0A 1A0B 1A0C 1A0D 1A0E 1A0F 1A10 1A11 SGNMERR RGENERR AGENERR SGENERR COPYERR JPNBERR NOMATCH CATERR INITERR IDXNSTBL SCIDXOBS SEQERR RECERR JCLERR SORTERR RCERR ILLLDN COMDERR JOBNRTRY JOBRTRY KEYERR NEGSZERR MATHERR SEXPOV DEXPOV QEXPOV SLOGZR SLOGNG DLOGZR DLOGNG QLOGZR QLOGNG STWOUN STWOOV DTWOUN DTWOOV QTWOUN QTWOOV DMODZR QMODZR Segment name error Relative generation error Absolute generation error Symbolic generation error Copy error JP error No matching name A file that is requ
450. ion DFASG 3 IFNASG DFASG 3 JUSTEXEC DFASG 4 ABOPROC DFASG 4 IOFAIL DFASG 5 CONFLICT DFASG 5 SYSOV DFASG 6 CONFLICT DFASG 6 OPEN DFASG 7 BUSY DFASG 7 CONFLICT DFASG 8 FLABUNKN DFASG 9 BUSY File Management Return Codes in More Detail An attempt has been made to assign a file dynamically on a different site with an enqueuing semaphore which is permitted to activate the Output Writer This is not possible on a different site The ifn is already assigned to this process group An assign has been performed with ACCESS EXECUTE and the issuer has the EXECUTE right An exception has been recovered by the ONCOND mechanism An I O error has occurred during reading from or writing to the SYS KNODET file This return code can be set during a warm restart or after a system crash in the following cases The segment containing the dynamic assigns does not exist The specified ifn does not exist in the segment which contains the dynamic assigns The maximum number of ifns have been assigned for the process group An incorrect value has been specified for the ALLUNIT parameter of the H_DYNAL primitive An attempt has been made to call the primitive H_DYNAL for a file which is already open Set during static allocation in the following cases The file referenced has already been assigned by another job Another job has already requested that the file be allocated Set during st
451. ion 4005 01 ARGERR Previous system trace collector occurrence left an incorrect descriptor for SYS_RDYSEG segment Anew segment is allocated for this purpose 4005 02 CHECK Incorrect internal segment descriptors table status detected when allocating system trace collector resources 4005 03 h_ssmget RC Incorrect semaphore acquisition when allocating system trace collector resources 4005 04 h sger RC Type 0 segment acquisition error when allocating system trace collector resources 4005 05 h sger RC Type 2 segment acquisition error when allocating system trace collector resources 4005 06 h_ssmfre RC Semaphore release error following an incorrect system trace collector resource allocation phase 4005 07 h sgdl RC Segment release error following an incorrect system trace collector resource allocation phase 4005 08 CHECK Incorrect access to system trace resident structures 4005 09 ILLSEM Incorrect access to system trace resident structures 47 A2 10UJ 44 5 Messages and Return Codes Directory 44 1 3 44 6 4005 10 ILLSEM SICID 4006 Messages Incorrect access to system trace resident structures TR20 messages numbers issued by 4006 sicid procedure are defined as a function of the originating task ordinal number 1 to 6 Messages are listed once with the six corresponding numbers that allow precise task and buffer identification TBL NE Error number Return code 4006 1 6 MSGERR 4006 7 12 JP
452. ion RERUN Rerun Support RFA Remote File Access ROLFW File Roll Forward RSCTL Resource Control SBR System Behavior Reporter SCANR VPF File Scanner SCHDL Scheduler TBL NE SCPLD System Loader for SCP and ISIP SDL Language Syntax Description SFLTC Software Factory LTC SMMNC Sharable Module Maintenance STLNK Static Linker STND2 Common Standard Level 2 Structure SUMAR Summary CROSSREF SYGUP System Generation and Update 47 A2 10UJ 47 A2 10UJ Interpreting Return Codes SYSBA System Base Management SYSIN System Input Control SYSOP Validation of Unbundled Product TAILR Software Delivery Tailoring Tool TASKM Process Management TDS Transaction Driven Subsystem Monitor TIMER Timer TP7 Transaction Driven Subsystem Monitor TRID Sort Distribution UPNCP Upsite for UNCP USER User Error COBOL Program VCAM Virtual Communications Access Method VMM Virtual Memory Management Abbreviations Used in the Return Code Explanations TBL NI Abbreviation Meaning ASA American Standards Association Format AVR Automatic Volume Recognition BAM Block Allocation Map BFAS Basic File Access System BINLIB Binary Library BKST Backing Store BPB Blocks Per Buffer BSN Block Sequence Number CA Control Area CCE Channel Command Entry CD Communications CHKPT RES Checkpoint Restart CI Control Interval CKPT Checkpoint CLI Internal Coding of GCL Statements GCL JCL CLM Configuration Load Manager CNC Communications Network
453. ion None RESTARTABLE ABORT RESTART PHASE Meaning The recovery phase is finished and the Commitment Units are ready to restart Action None DUE TO GENERATION VALUES NO CONNECTION LEFT FOR TM CORRESPONDENTS Meaning This message appears when the computed number of TM Correspondents is 0 e either at TDS startup 47 A2 10UJ MU and MV Messages e or after M ALLOW NEW _ TDS COR has been issued on TM Correspondents Any attempt to connect terminals to the TDS will be rejected with the code 0006 M TERMINATE TDS CONNECT NONE has been performed on the previous session or TDS has been started up with CN NONE in OPTIONS for the JCL on starting the TDS job The computed number of TM Correspondents is 0 when e either the TMSESS value of the TDSWKS Directive in the NETGEN for this TDS is 0 e or ifno TDSWKS Directive exists the number of terminals supplied in the STDS results in no TM correspondents left after decrementing the DUMMY maximum plus the virtuals of all virtual families and subtracting 1 if TDS MASTER MAILBOX is used Action None if this situation is expected Otherwise increase the TMSESS value of the TDSWKS Directive according to the number of terminals expected and resubmit NETGEN H_REINIT TRANSACTION CANNOT BE LAUNCHED WARM RESTART MANDATORY Meaning The H_REINIT transaction defined in the TDS generation to be used as a STARTUP transaction in case of RESTARTABLE ABORT
454. ion but the device or device class does not exist in the current configuration The given device class is incomplete Device type translation not possible 47 A2 10UJ 47 A2 10UJ DVMGT 29 MDNAV DVMGT 30 DVNAV DVMGT 30 DVVIOL DVMGT 30 MDNAV DVMGT 30 RESNAV DVMGT 30 RSUNKN DVMGT 35 WRONGDV DVMGT 36 TRUNC DVMGT 36 WRONGDV DVMGT 37 SGNAV DVMGT 38 DVCERR DVMGT 38 DVNASG DVMGT 39 DVNAV Device Management Return Codes in More Detail Unknown device type Device not available The belt is not identified Reconfiguration rejected at AVR time Reconfiguration of SHARED media rejected The device being recognized is not sharable AVR for cartridge library Optic label differs from magnetic label Reconfiguration of SHARED media rejected The source drive is seized by the other system At AVR time For allocation with the ANY MEDIA option volume not found in system tables For a cartridge library unknown optic label System error Value out of range Normal return code The returned site description has been truncated Array too small System error or an unused entry has been found while scanning the system tables Value out of range or unused due to MIRROR disk pairing System error The segments required for DVMGT system tables cannot be successfully created System error while allocating a disk for several steps Value out of range or unu
455. ion by the new one only when the CU generation phase is completed Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center 47 A2 10UJ 31 5 Messages and Return Codes Directory PAS18 OPENS CULIB OLD MEMBER member name RC edited return code Meaning The compiler was unable to access the member containing the old CU version of the program being compiled to replace it by the new version The return code indicates the reason for the incident which is probably due to a system error Result Compiling stops Action Refer to message PAS15 PAS19 procname IS ALREADY AN ALIAS IN CULIB DUPLICATE NAME Meaning An attempt was made to create a CU when another CU containing a secondary entry point already exists in the library with the same name as the procedure being compiled Result The new CU cannot be created in the library Action Use the LIST command of the LIBMAINT CU to get the name of the procedure containing the secondary entry point then rename the new procedure or use a new CU library PAS20 GET CULIB OLD MEMBER member name RC edited return code Meaning To replace an old version of the CU by a new one the compiler reads the old CU An incident occurred while reading a record The return code gives the reason for the incident which is probably due to a system error Result Compiling stops Action Refer to mess
456. ion codes in this manual STEP BUFFER POOL UNLOCK BUFFER n CREATE BUFFER p Meaning This message gives statistics about buffer pool usage The values given can be used to optimize buffer management This message is issued when the last file deassign for the step is carried out Action Refer to the UFAS User s Guide IFN ifn REWRITE CNT n1 DELETE CNT n2 WRITE CNT n3 Meaning Information message giving the primitive counts for the REWRITE DELETE and WRITE functions performed in update mode I O in COBOL respectively 47 A2 10UJ DUF Messages 13 2 Ufas Extended Message Descriptions These messages give statistical information about the behavior of programs which use UFAS EXTENDED 13 2 1 File Level Statistics gt gt gt UFAS IFN STATISTICS IFN ifn REWRITECNT a DELETECNT b WRITECNT c READCNT d Meaning This message is output after the execution of each user primitive It is an information message which gives the primitive counts for the REWRITE DELETE WRITE and READ functions respectively gt gt gt TURBO EFN STATISTICS EFN efn GETCICOUNT d HITCOUNT e IOCOUNT f Meaning This message is output when the last ifn assigned to this efn is closed GETCICOUNT is the total number of times a GETCI has been performed for the file i e the number of blocks accessed HITCOUNT is the read hit count that is the number of GETCIs which retrieved the correct file Control Interval from memory r
457. ion is aborted Action Contact the Service Center DDM00772 lt error localization gt DB STATUS value DATA BASE CANNOT BE RESTORED TO ITS INITIAL STATE DURING AN ERASE ALL ON CRU Asses Piss Li Meaning Recovery is impossible Result In Batch environment the step execution is aborted Action Contact the Service Center DDM00773 lt error localization gt DB STATUS value RETURNED BY A MODIFY WITH MIGRATION Meaning This error occurs only in the TDS environment when the MODIFY statement is recovered The DEFERRED WRITE option is active or dynamic recovery using the Before Journal is impossible Result The step execution is aborted Action Contact the Service Center DDM00774 lt error localization gt DB STATUS value RETURNED BY AN ERASE ALL Meaning This error occurs only in the TDS environment when the ERASE ALL statement is recovered The DEFERRED WRITE option is active or dynamic recovery using the Before Journal is impossible Result The step execution is aborted Action Contact the Service Center 9 24 47 A2 10UJ DDM Messages DDM00775 This message has two variations DDM00775 lt error localization gt DATA BASE INDEX INCONSISTENCY DETECTED DURING ACCESS THROUGH KEY key name INDEX ENTRY POINTS TO AN INVALID DATA BASE ADDRESS A P Li Meaning The DML statement needs the key The index entry exists but leads to an invalid data base address The area was upda
458. iptions esseesseeseesinessreetntetrnstrnstnstnntnttnnrnnsrnnsrenstenstensenannnt 18 1 18 2 Gac Extended Message Descriptions cccccccceeecneeeeteeeeeeeeceaeeeeeneeseeeeteaeetseeeeeaees 18 3 vi 47 A2 10UJ 19 20 21 22 23 24 25 26 27 28 29 30 31 32 GCOS 7 Kernel Messages GPL Messages IL Messages IN Messages JB Messages JP Messages LD Messages LK Messages LH Messages MAC Messages MU and MV Messages OU Messages PAS Messages PCF Messages 47 A2 10UJ Table of contents vii Messages and Return Codes Directory 33 PT Messages 33 1 Initialization Messages PT01 To PT26 ooo eee ececneeeeeeeneeeeeeeneeeeeteaeeeeeesaeeeeesenaeeeeenaaes 33 2 33 2 Dialog With VCAM Messages PT31 To PT68 0 cceccceeeeeeeteeeeeeeteeeseeeeseaeeesseeeeeaees 33 5 33 3 Veam Error MeSSages nonien ankan E iNANO Eu VA ANEN ONEA EANA PAE A EFASE VANAPA Eei 33 10 33 3 1 Status 33 10 33 3 2 Reason 33 11 33 3 35 6 REASON EEEE E A EE A E E EA 33 12 34 QC Messages 35 QL Messages 35 1 Message Descriptions For VBO SyStemS ccccscceeeeeeeeeeeseneeeeeaeeseaeeeseeeseaeeeneaeenenees 35 1 35 2 Message Descriptions For FBO Systems c ccccccceeeeeeeeeeeeeeeeeeeneeeeeeeseeeeeeaeeeeneeeee 35 12 36 RDN Messages 37 RR Messages 38 RT Messages 39 RY Messages 40 41 SC Messages SQ
459. is collector task Incorrect access to the file related to this collector task Incorrect write in the file related to this collector task Meaning Action Incorrect buffer index detected during resource release procedure execution for system trace collector exit routine Incorrect internal segment identifier in a trace dump buffer descriptor detected during system trace collector resources release phase Incorrect internal segment identifier in a trace event buffer descriptor detected during system trace collector resources release phase Semaphore release error during system trace collector resource release phase 44 7 Messages and Return Codes Directory 44 1 5 44 8 4007 05 4007 06 4007 07 4007 08 4007 09 4007 10 h sgdl RC h close RC CHECK CHECK ILLSEM ILLSEM SICID 4009 Messages Segment release error during system trace collector resource release phase System trace collector close and deassign error during resource release phase Incorrect internal semaphore identifier detected during system trace collector resource release phase Incorrect access to system trace resident structures Incorrect access to system trace resident structures Incorrect access to system trace resident structures Messages numbers issued by 4009 sicid procedure when describing a collector task state are defined as a function of the concerned process ordinal number Such messages are
460. is given Generally caused by the SIZE parameter JCL SRTDEF USER SORT KEYS ARE TOO LONG Meaning The total length of the sum or key fields exceeds 7000 bytes 42 17 Messages and Return Codes Directory TD04 22 TD04 23 TD04 24 TD04 25 TD04 26 TD04 27 TD04 28 TD04 29 TD04 30 42 18 Action Correct the user program USER RECORD IS TOO LONG Meaning The sort record size exceeds 15000 bytes Either the user record is too long or too many keys overlap Action Correct the user program UNABLE TO ALLOCATE DYNAMIC DISK WORK FILE Meaning A return code from H DYNAL is given UNABLE TO ASSIGN DYNAMIC DISK WORK FILE Meaning A return code from H_DYNASG is given UNABLE TO DEASSIGN DYNAMIC DISK WORK FILE Meaning A return code from H_DDASG is given Action Report the problem to Technical Support UNABLE TO CLOSE DYNAMIC DISK WORK FILE Meaning A return code from H_CLOSE is given Action Report the problem to Technical Support MEMORY_SORT OVERFLOW Meaning A memory sort is required and the memory is too small Action Correct the user program UNABLE TO DELETE WORK FILE DEFINITION Meaning Sort is deleting useless FD file definition table A return code from H_DFLD is given Action Report the problem to Technical Support UNABLE TO IDENTIFY WORK FILE Meaning Sort is unable to determine which volume supports the work file H_RTVLID A return code from H_RTVLID is given SO
461. is means that several files with secondary indexes can be assigned simultaneously using one ASSIGN statement DFASG 3 CONFLICT Generally this means that the input parameters specified for a static assign were incoherent or incompatible However this return code may also be output in the following cases Device class not supported MWLIB or MWINLIB command specified for a device other than a disk Two assigns have been made on the same tape in the same process group The NEXT parameter was not specified for the second ASSIGN Two assigns have been made on the same efn in the same process group The ACCESS parameter was set to WRITE for the first assign and to ALLREAD for the second 57 2 47 A2 10UJ 47 A2 10UJ File Management Return Codes in More Detail Two assigns have been made on the same efn in the same process group with different values for the SHARE parameter This is only possible without error when the ACCESS parameter is set to READ and the SHARE parameter is set to NORMAL or ONEWRITE Two assigns have been attempted on the same efn with contradictory device names Assigns have been attempted on the same efn with an incompatible NOVOLWR parameter Two assigns have been attempted on the same efn with an incompatible POOL parameter 57 3 Messages and Return Codes Directory 57 4 A define has been attempted on a file which has already been assigned to a d
462. ist Handling Job Management Memory Request Load Module Loader OMH Message Management SBR Collector System Nucleus Loader VMM UFAS EXTENDED VCAM ISO SYSOVLD 0506 Job Management System Output 47 A2 10UJ RESNAV to YETALLOC Return Codes The next record according to the key of reference is a duplicate of the current record System configuration overflow The specified catalog cannot be attached due to a system table overflow Try again later The number of active lockids exceeds the value of the CONFIG parameter NBLOCKID Check the values of the CONFIG parameters LOCKSIZE and NBLOCKID Request exceeds system capacity 1 At least one segment of the load module exceeds the maximum size allowed on this configuration 2 The step has one or more segments whose size is greater than the maximum size supported by the system configuration Decrease the size of the segment s There is an overflow in the operator message queue or in the mailbox Try to send the message later There is no more space in the SBR type 0 segments Contact the Service Center Loading is impossible because of insufficient memory size Contact the Service Center The request exceeds the system s capacity Contact the Service Center The number of buffers available for the whole system has overflowed Decrease the total number of buffers The maximum for V3A7 is 4000 The maximum for V3B7 is 8000 The maximum number of sessions allowed by
463. ith checkpoints If the step is preinitialized cancel this with the CLM command and then preinitialize again with the PLM command If the step has checkpoints contact the Service Center A permanent object SM PLM CKPT cannot be found Create the required object System information has been lost Contact the Service Center 1 The address in backing store of the VMF segment to be deleted does not match the address specified 2 There is a mismatch between the control structure of a permanent object and the allocation map of permanent backing store Either the page to be allocated is already recorded on the map or the page to be deleted is not recorded on the map 3 There is a mismatch at block level In all cases contact the Service Center Incoherence between OPEN parameters and context XUFAS 41 Internal error at CLOSE time XUFAS 42 Negative answer to test request The option NON ACTIVE has been specified for the characteristics of the test decor of the system to be dumped Testing has been carried out correctly System forms are not supported for the current device Check the device types in your user profile 47 A2 10UJ NOCURREC 1C04 Any File Organization and TDS COBOL RTP File Management Unit Record Driver Diskette NODE 00B4 NODELETE 1C19 Any File Organization and TDS IDS II Unit Record Driver Diskette NODETAIL 0430 NOINIT 1c09 COBOL
464. itialization file Verify initialization command file 44 3 Messages and Return Codes Directory 44 4 4004 32 ARGERR 4004 33 ARGERR 4004 34 ARGERR 4004 35 ARGERR TBL NE 4004 36 ARGERR 4004 37 ARGERR 4004 38 ARGERR 4004 39 ARGERR 4004 40 ARGERR 4004 41 ARGERR 4004 42 ARGERR 4004 43 ARGERR 4004 44 ARGERR An incorrect trace domain file classes status in the collector initialization file Check the collector initialization commands A class has both mem and file status or TDP class is mem on a trace domain definition in the collector initialization file Check the collector initialization commands TDP class open for a domain in a TRCBUF without TD pages in the collector initialization file Check the collector initialization commands An incorrect trace domain wait attribute definition in the collector initialization file Check the collector initialization commands Empty TRCBUF enclosure in the collector initialization file Check the collector initialization commands Incorrect index word on a TRCFILE in the collector initialization file Check the collector initialization commands TRCFILE index outside this version allowed range in the collector initialization file Check the collector initialization commands Incomplete TRCFILE command in the collector initialization file Check the collector initialization commands Duplicate TRCFILE efn definition in the collector initialization file
465. ity DBVSR Volume Save Restore Utilities DCTLG Catalog Management DDML Data Manipulation Language Processor DDS Data Dictionary Handling DDX Data Dictionary Extension DEBPR Debugging Support Processor DFASG File Assignment DFDES File Description Processing DFPRE File Processing Preparation DFREC File Recovery DFSRD File Save and Restore DFVLU Files and Volumes Handling Utilities DFVPH File and Volume Physical Handling DIACS IA Integrated File Access System DIDML Interactive DML DIRIO Interpreter for T amp D DISKT Diskette Driver DMIG MAINTAIN MIGRATION Processor 47 A2 10UJ 47 A2 10UJ Interpreting Return Codes DMIR MIRROR Utilities START MIRROR and FILL_MIRROR DPACT Dump Accounting Information DQULK Library Access DRFIL Restore File Utility DSEQL BFAS Sequential Files DSFIL Save File Utility DSLVG Salvager DSMGT Disk Storage Management and Tape Label Handling DSORT SORT MERGE DSP Schema Processor DUFAS UFAS Files All Organizations DUM Dummy Access Method DUMPACT Dump Accounting Information DUTIL Data Management Utilities general DVCK Volume Check Salvaging DVMGT Device Management DYNAD Dynamic Addresser for sharable modules EDQ Easy Data QUERY ERLOG Error Logging EVMGT Event Management EXCEP Exception Handling FMATP FORTRAN Mathematical Package FNPS Front End Network Processor Support FORMA Formatting for Listing FORMS FORMS Handling TBL NE FORTR FORTRAN Comp
466. ity cannot restore the execution context after a restart or checkpoint Examine the return codes and system messages to pinpoint the cause of this error Attempt to use a station although RBF facilities not present on the machine File not accessible Function not available The requested function is not available in the current environment For example H_TOALTAREA on a CKD VBO or FSA volume The function is not available due to a failure in the system initialization Contact the Service Center The very large segment capability is not supported by this hardware Compile and link again A TOW SPOOL command has been entered with the following syntax TOW Tnnn this is not accepted Enter the TOW SPOOL command using the following syntax TOW site SPOOL The M MDTDS Master Command was sent and the XCP2 process or other process parameter was used The function is not yet provided 52 25 Messages and Return Codes Directory Unavailable function for specified file e g READ for user journal file The transaction aborted due to a programming error call to an unavailable function 1 The JPPC has not started because of a problem when the JPPC Load Module started Refer to the PP message issued when the JPPC Load Module started or 2 The function is not supported Check that XCP2 is installed These operations are not allowed The specified function is not available in this context 1 Invali
467. ive number The square root of a negative number is undefined double precision ARG too near to N PI 2 ARG gt 10 15 loss of precision The tangent function argument gt 10 8 loss of precision Result too big when ARG gt 251 Result too small when ARG less than 260 47 A2 10UJ DATANAYV to IOFAIL Return Codes DUMMY 0016 A dummy file was assigned COBOL Status Key value 00 for sequential file in input mode value 9I otherwise Any File OPEN File was assigned as dummy or a file was Organization assigned as optional and either the file is not on the volume or the volume was not mounted CR by the operator No operation performed For sequential access in input mode in COBOL a READ will return DATALIM a subsequent READ will return EXHAUST and a WRITE will respond DONE although no record will be stored NOTE It may be useful to check the ASSIGN statements in the JCL DUNAV Availability Control ISFM IMRU Abnormal termination of channel program of Set Function Mask due to a channel exception or because there is no valid path DUNERR Availability Control ISFM IMRU The logical device name supplied does not exist DUPENTY 04100 420 Duplicated entities DUPKEY 0411 New record key duplicates existing record key COBOL Status Key value 22 Any File WRITE Duplicate key and no DUPREC parameter has Organization been specified Check key insertion and DUPREC 47 A2 10UJ 52 9 Messages and Return Codes
468. ject does not exist in SITE CATALOG 54 3 Messages and Return Codes Directory RLSPUNKN 102D Catalog Management CATALOG RLUPUNKN 102A Catalog Management CATALOG RNGVIOL 1600 161F RONOUT 0801 RONUNKN 1005 Job Management H_TERMJ RPARVIOL 1618 Physical I O Access Various Internal Operations RPWUNBUN OAE1 RSUNKN 100C Availability Control GAGS Error Logging GAC KEEP CURRENCY Network Generation Physical I O Access Various Internal Operations 54 4 Relation station project unknown The relation station project does not exist in SITE CATALOG Relation user project unknown The relation user project does not exist in SITE CATALOG Ring violation Run occurrence number out of bounds Run occurrence number unknown Run occurrence number unknown Parameter not allowed because of the ring of the primitive issued Ring parameters violation Report writer unbundled Resource unknown Resource not found in SRST The file SYS ERLOG is initialized after a change to the hardware configuration which has not been detected by CONFIG Re initialize SYS ERLOG using MLOG INIT JCL or SERLOG CLEAR GCL An attempt has been made to modify the lock type for a resource which is not locked An attempt has been made to unlock a resource which is not locked The remote system was not found in the telecommunications dictionary Resource not found in system or incomplete resource
469. jects Otherwise contact the Service Center SOURCE MEMBER member name IS NOT IN PAS LANGUAGE Meaning The source member given as input to the compiler is neither of the PASCAL type TYPE PAS nor the DATASSF type TYPE DATASSF Result The compiler proceeds this may produce strange results if the PASCAL compiles JCL commands or a COBOL source program Action Change the TYPE of the source member using LIBMAINT PUT SYSOUT RC edited return code Meaning The compiler was unable to write a record in the standard SYSOUT when tracing the return code gives the reason Result Compiling stops Action Contact the Service Center TYPE OF INLIB SHOULD BE SL Meaning The library given as input to the compiler is not a source language library Result Compiling stops Action Check the JCL and correct it if relevant TYPE OF CULIB SHOULD BE CU Meaning The library specified in the CULIB parameter is not a Compile Unit library Result Compiling stops Action Check the JCL and correct it if relevant UPDATE ERRONEOUS LENGTH Meaning A compiler internal problem occurred in the management of virtual memory working files Result Compiling stops Action Report the problem to the Service Center 47 A2 10UJ PAS Messages PAS56 CALLERS ARE address values Meaning An information message which appears every time a compilation steps before normal termination Action Take the contents of this mes
470. k id is invalid after scheduling TDS internal error unknown index The specified SCB is invalid or it does not point to a record Input device forbidden Error in initialization of a file Initialization violation Action done but an interrupt has occurred Invalid character The name of the file to be allocated contains a character which is not allowed by ECMA Output message contains invalid characters e g escape sequence The current message is skipped Syntax error Refer to the error message Invalid private PECT entry Invalid stack descriptor 47 A2 10UJ INVUSE 1707 GAC EXTENDED TDS IQS Network Generation PASCAL RTP System Nucleus VMM TDS UFAS EXTENDED IOACT 0482 Availability Control Set Function DATANAYV to IOFAIL Return Codes Invalid use of function An asynchronous call to an error procedure has produced a return code which is not DONE The user can do nothing to correct this error Attempt to enable an obsolete or temporary configuration Run the CRNETGEN utility to recreate configurations T O operations are not allowed because the buffer is locked This is because it was used in a WITH statement or paired by reference to a procedure or function 1 The specified file has already been opened with the Processing Mode set to OUTPUT 2 The maxsize change does not allow a segment greater than 64k Contact the Service Center Invalid values for the SML
471. l Check the addresses in the CCE branch they must refer to the CCE in the Channel program Buffer not assigned The buffer is not assigned in the CCE A buffer address is in a segment which is either not a buffer or not locked Check the data transfer CCEs and buffer segments Disk address violation Disk address violation in a CCE The CCE refers to an address outside the assigned files Invalid flag modification Invalid flag modification in a CCE File mask or Function mask violation Invalid parameters for set file or function mask CCE Illegal CCE Invalid Channel Command entry in Channel program Invalid CCE number ARG i overflow complex arctan ARG i overflow complex arctanh 47 A2 10UJ ABNCCAD to DATALOSS Return Codes CDERR 1813 Command error FORMS A severity 3 error has been detected The MAINTAIN FORM processor stops The error message displayed indicates the type of error GCL There is an error in the command to be executed Modify the command IOF RMS SWI processing is forbidden under RMS Operator Message Command Error in command analysis or processor Handling Processing 1 A command has been specified which is reserved to the system 2 An interactive command has been submitted in an non interactive environment SBR Collector and A specified command cannot be processed or an Analyzer unknown command has been specified syntax error Correct input commands CDTHPREC 1A71 s
472. l structure was damaged In all cases contact the Service Center WRITER Job Level System structures damaged output writer Permanent SYSOUT request not taken into account 51 31 Messages and Return Codes Directory WRITER Step Level Standard SYSOUT TDS Any Operation DAPPLSAT 0A33 DASCUD 1A2E Mathematical Package DAT2ZR 1A31 Mathematical Package DATAERR 1E02 DMU COMPARE Catalog Management Error Logging FORMS File Management System Disk IDS II WRITE OMH Main Console Management PASCAL RTP READ RBF A M Level 6 SORT MERGE 51 32 CREATE PRINT System structures damaged SYSOUT request not taken into account by system Internal error Contact the Service Center Destination application saturated Undefined for ARG gt 1 Arc sine argument absolute value is gt 1 The result is undefined double precision Null vector Both arguments of ATAN2 function are zero The result is undefined double precision Error in data read Record has an unpacked decimal value in a packed decimal field Records have been degraded in the catalog Patch the record s to recover or correct them and notify the Service Center Incoherent information found in the log file SYS ERLOG SYS ERLOGC or SYS ERLOGF during the salvaging phase Contact the Service Center A system error has occurred Contact the Service Center Data error during I O Corrupt CI chain
473. le labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support 47 A2 10UJ TD35 16 TD35 17 TD35 18 TD36 01 TD36 02 TD36 03 TD36 04 TD36 05 TD37 01 TD37 02 TD37 03 47 A2 10UJ TD Messages UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO START A SERVANT PROCESS Action Check if you have tried to run a multi process LM If not report the problem to Technical Support INTERNAL SORT ERROR Action Report the problem to Technical Support UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DEFINE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO DELETE CHANNEL PROGRAM Action Report the problem to Technical Support UNABLE TO CREATE WORK FILE DEFINITION Meaning A dynamic FD file definition table is required and cannot be created Action A return code from H_CRFD is given It could be a linkage problem ENTRYO
474. le open error Verify TRC_CLTR_V20 file exists in SYS HSLLIB 4004 2 ARGERR Collector initialization file is empty or contains empty records Check the collector initialization commands 4004 3 ARGERR Collector initialization file contains incorrect first level commands or a TRCBUF enclosure is not closed Check the collector initialization commands 47 A2 10UJ 44 1 Messages and Return Codes Directory 44 2 TBL NE 4004 4 ARGERR 4004 5 ARGERR 4004 6 ARGERR 4004 7 ARGERR 4004 8 file close RC 4004 9 ARGERR 4004 10 ARGERR 4004 11 ARGERR 4004 12 ARGERR 4004 13 ARGERR 4004 14 ARGERR 4004 15 ARGERR 4004 16 ARGERR 4004 17 ARGERR Collector initialization commands must define at least one trace buffer Check the collector initialization commands A TRCBUF is connected to an undefined TRCFILE in collector initialization file Check the collector initialization commands A TRCFILE not connected to any TRCBUF in collector initialization file Check the collector initialization commands A TRCFILE command for an undefined TRCFILE in collector initialization file Check the collector initialization commands Collector initialization file close error Check the file state Incorrect TRCBUF name in collector initialization file Check the collector initialization commands Duplicate TRCBUF name in the collector initialization file Check the collector initialization commands More than maximum accepted
475. listed once with the six corresponding numbers that allow precise task and buffer identification TBL NE Error number 4009 1 4009 2 4009 3 4009 4 4009 5 4009 6 4009 7 4009 8 Return code NOINIT TMLIM MSGERR MSGERR MSGERR MSGERR MSGERR MSGERR Meaning Action System trace collector execution is not allowed during a GCOS session initialized with the ISL argument TRC OFF At least one deadlock state was detected and cleared during current system trace collector execution This informative message is issued before collector termination System trace collector is notified with an out of bounds target descriptor message System trace collector is notified with a message not issued for current collector occurrence System trace collector is notified with a read trace object message with incorrect buffer identifier System trace collector is notified with a read trace object message for an absent buffer System trace collector is notified with an incorrect stop message System trace collector is notified by a collecting task with an incorrect RI message 47 A2 10UJ 44 1 6 44 1 7 47 A2 10UJ 4009 9 4009 10 4009 11 16 4009 17 4009 18 23 4009 24 29 4009 30 4009 31 4009 32 4009 33 38 4009 39 44 4009 45 50 4009 51 56 4009 57 62 MSGERR h sgdl RC PCSNAV MSGERR ILLSEM TMLIM CONFLICT ILLSEM ILLSEM h_initsk RC TR
476. lready been released to backing store 4 Invalid directory pointer or block pointer 5 An address specified either in memory or in the BKST is invalid In all cases contact the Service Center Diskette address given via INADDR out of volume limits or DD field of INADDR diskette address greater than block size value The ISO Session Service cannot find the correspondent Check the network address configuration 51 5 Messages and Return Codes Directory ADDROUT ADDRVIOL ADFTERR 51 6 0804 Address out of bounds COBOL Status Key value 24 if WRITE statement 23 Any File Organization BFAS UFAS Tape Files Catalog Management RWI System Nucleus UFAS Relative Unit Record Driver Diskette 1480 14FF System Nucleus 1823 Any File Organization Unit Record Driver Diskette otherwise Any I O Operation The mass storage address specified is outside START Dynamic Addresser VMM file limits this may occur when all volumes containing the file are not fully described in the JCL volume list Correct program or JCL or check INADDR or LRR R Address out of file limits Catalog record address is not valid This is a Catalog Access Method error Inform the Service Center Address out of bounds illegal The address of the block is out of the range of the file The transfer is refused See rules on mono block or multi block transfers Address out of range A
477. ly File Salvaging has been done Action Try to run FILCHECK again later if necessary ifn SIZE OF THE SUBFILE HAS BEEN UPDATED TO NEW VALUE n Meaning The size of the subfile has changed after salvaging Result The subfile has been salvaged Some data may have been lost ifn UNABLE TO WRITE A BLOCK OF BAM END OF SALVAGING Meaning An error has occurred while writing to a block of the Block Allocation Map Result File Salvaging terminates abnormally The file is not completely salvaged Action Contact the Service Center 47 A2 10UJ QL60 QL61 QL62 QL63 QL64 QL65 QL66 47 A2 10UJ IFN IFN IFN IFN IFN IFN IFN SIZE QL Messages ifn UNEXPECTED BAM BLOCK STRUCTURE FILCHECK SUBMITTED Meaning The Block Allocation Map is in an inconsistent state FILCHECK has been activated to eliminate the inconsistencies Result The Block Allocation Map is rebuilt ifn SUBFILE DELETION COMPLETED Meaning A subfile was not completely deleted File Salvaging has completed the deletion Result The subfile is now deleted ifn CHANGE NAME ACTIVATED PREVIOUS STATE RESTORED Meaning A CHNAME command with the REPLACE option has terminated abnormally Result The directory and the Block Allocation Map are restored to the state they were in before CHNAME was run ifn CHANGE NAME ALIAS STATE RESET Meaning The primitive H_RENAME has terminated abnormally Result The
478. ly indicates a system error but return code EFNUNKN may indicate a user error for example when the file specified in a SWINPUT or INPUT JCL statement does not exist on the specified volume Result Job reading is stopped Action Check the JCL contact the Service Center if necessary INO1 ron IN jnm USER usernm CLASS jclass SPR spr STATION stnm 01 INO1 ron HOLD jnm USER usernm CLASS jclass SPR spr STATION stnm 02 Meaning 01 A job has been introduced to the system 02 The job was put into HOLD after translation and will not be started until a RELEASE JOB command is issued or another job executes a RELEASE JCL statement 47 A2 10UJ 22 1 Messages and Return Codes Directory IN10 OUTLIB NOT READY AT INTRODUCTION TIME Meaning An input stream submitted by the JCL statement RUN contains a DATA statement which specifies a receiving library on a volume which was not mounted when the RUN statement was executed Result The data enclosure is not entered Action Try again after mounting the requested volume IN11 OUTLIB RESOURCE BUSY Meaning An input stream submitted by the JCL statement RUN contains a DATA statement which specifies a receiving library which was being used by another job when the RUN statement was executed Result The data enclosure is not entered Action Retry later IN12 LAST JOB SELECTED NOT FOUND Meaning The JCL statement RUN specified job selection JOB parameter a
479. lyzer 00B8 A modification to a CI has been made in deferred update mode 0A19 CI deferred update not available GAC OPEN CLOSE TDS has assigned a file with SHARE DEASSIGN MONITOR with an access mode which authorizes sharing not SPREAD or SPWRITE Only deferred update protection has been requested When an attempt is made to access the file it will be aborted The Before Journal must be specified in this case or the file must be accessed in exclusive mode UFAS and UFAS Deferred write cannot be used for the current EXTENDED Any transaction Information only When the file was Organization opened an attempt was made to salvage it using the UFAS File Salvager but ACCESS READ To salvage the file ACCESS must be WRITE 1C1F The project still has access rights 1C0F Object has lower levels Catalog Management UNCAT The object to be deleted cannot be deleted as it still has dependent nodes or the file has a valid media list Perform DEALLOC or check catalog contents 1 c10 Object has relationship Catalog Management CATDELET The catalogued object user project billing cannot be deleted it still has dependent objects Check site catalog contents 1 c11 Object has synonym 1E0A Device in write protect state Any File OPEN Attempt to open a file for writing rejected Organization because disk is in protect state File Management System Disk Volume protected 47 A2 10UJ RWI UFAS EXTENDED Any Organiza
480. made to do one of the following e assign a cataloged file with values different from those declared in the catalog e re assign a cataloged file with values different from those in the original ASSIGN statement Result This error is usually detected at step initiation time the step cannot be started Action Correct the JCL DS20 efn INVALID FILESTAT CATALOG FILE DOES NOT EXIST Meaning In the JCL statement ASSIGN efn refers to a cataloged file FILESTAT CAT but there is no attached catalog and no SITE catalog 47 A2 10UJ 11 3 Messages and Return Codes Directory DS26 DS29 DS30 DS32 Result This error is usually detected at step initiation time the step cannot be started Action This problem may arise when files are transferred from a site with a site catalog to a site without a site catalog In this case the ATTACH statements must be added to the JCL efn UNSUCCESSFUL FILE ASSIGNMENT RC edited return code Meaning The file cannot be assigned due to a system error the return code gives the reason for the error a possible reason is an I O error while accessing the catalog Result This error is usually detected at step initiation time the step cannot be started Action Contact the Service Center efn PASSED FILES CANNOT BE DISTINGUISHED PRECISE VSN S Meaning The ASSIGN statement refers to a passed file and only the efn was given Unfortunately there exist two passed
481. mand gt ILLEGAL ACCESS Meaning The user has not the access rights to this command DPRINT with LIB SYS TW OUT or not authorized priority Who receives the message The COMMANDSUB lt Rxxxx gt MOUNT lt form gt ON lt term gt Meaning The paper format required for this report is not mounted on the terminal printer 47 A2 10UJ TW Messages Who receives the message The OWNER CONTROL NOTE This message is sent every minute provided that the OWNER CONTROL who receives it is connected to IOF TW23 lt command gt UNKNOWN FORM NAME Meaning The required paper format has not been declared at GT Writer generation Who receives the message The COMMANDSUB TW24 lt command gt NO DEFAULT TERMINAL Meaning The destination is not specified and the user has no default terminal Who receives the message The COMMANDSUB Tw25 lt RxXxxx gt lt term gt NOT READY REJECT CODE lt code gt Meaning The attempt to connect this terminal failed Who receives the message The OWNER CONTROL NOTE This message is sent only once unless REPEATMSG has been specified for this terminal in which case it is sent at each unsuccessful connection retry TW26 lt command gt UNKNOWN USER Meaning The user has not been declared at GT Writer generation Who receives the message The COMMANDSUB TW27 YOU HAVE n FROZEN REPORT S Meaning A user who is connecting to IOF is informed of the number of frozen reports th
482. me on which the catalog resides is not mounted or the cataloged file is already being accessed exclusively by another process group 57 2 File Description Processing 47 A2 10UJ TBL NI DFDES 1 AGENUNKN DFDES 1 ARVIOL A cataloged file has been assigned with an empty generation and the CATNOW parameter has not been specified A cataloged file has been assigned but the issuer does not have the necessary access rights on the catalog to use it 57 9 Messages and Return Codes Directory DFDES 1 CONFLICT Set in the following cases A cataloged file has been assigned but SITE CATALOG does not exist A reference has been made to a generation of a cataloged file which is not accessible Several files have been assigned and passed with the same efn The current file is a resident file and the user did not specify the media list An attempt has been made to share a file which is not sharable as it does not reside on a disk An attempt has been made to assign a file which has already been assigned with a different value for SHARE or JOURNAL A file has been assigned with FILESTAT SUBCAT but the efn is not cataloged DFDES 1 IOFAIL A file has been assigned but the corresponding block in the SYS KNODET file cannot be read from or written to DFDES 1 SADMVIOL ASYS file has been assigned with SYS1 The access rights are correct but the issuer is not SYSADMIN DFDES 1 SCATUNKN ASYS cat
483. modules pre initialized load modules or checkpoints Destroy the unused objects The Output Writer table is full End an idle WRITER or GTP with the TOW command Transaction tried to lock more pages than TDS can control Either a TDS controlled file was not declared as a UFAS file at generation or there is an internal error The number of allocated SCBs has already reached the maximum BATAB CILOCK overflow XUFAS 4 Contact the Service Center Sequence Control Block number overflow XUFAS 41 45 63 Check this number Temporary limit of file has been reached COBOL Status Key value 10 READ VMM Terminal Management Access Method Temporary end of file New records must be introduced in I O or APPEND mode before any further READ commands It may be necessary to allocate a larger file Normal return code The last block of a virtual memory file has been deleted Terminal not assigned Terminal not available down IOF session terminated abnormally Destination terminal not available For example operator not logged on Destination not available 54 21 Messages and Return Codes Directory TIMELIM TIMEOUT 54 22 0029 TDS 1E03 ARS OMH RBF System Nucleus TDS RWI VCAM TPR File assignment Main Console Management Message Management OPEN CLOSE Time limit reached TPR time limit exceeded Time on exhausted in MLA The wait for an autom
484. n Check the file IFN ifn HAS BEEN CLOSED BY SYSTEM Meaning Information message indicating that the specified ifn has not been closed by the user at the time the step was terminated Result A close function has been automatically performed by the system Action None CLOSE DONE ON VOLUME volname FOR IFN ifn EFN efn Meaning Information message indicating in the case of file creation or file extension that the last record was written to the specified volume NOTE FOR FPO9 TO FP11 volname may not be known so volname will be called VOLUME volname NOT MOUNTED FOR IFN ifn EFN efn Meaning At close time the magnetic tape volume for which the end of file labels have to be written has already been dismounted This message is always followed by message FP10 Result Message FP10 indicates that no end of file labels have been written for the specified file either for the reason given in message FP03 or because of an I O error on the tape Further access after the last written record on the tape will result in an I O error UPDATED NO LABELS WRITTEN ON VOLUME volname BY H_CLOSE FOR IFN ifn EFN efn Meaning Indicates that no end of file labels have been written for the specified file either for the reason given in message FP09 or because of an I O error on the tape Further access after the last written record on the tape will result in an I O error 17 3 Messages and Return Codes Directory FP11
485. n argument passed to a predefined procedure or function has an incorrect value For example The argument passed to DISPOSE is NIL Correct the argument Dump Analyzer The parameters transmitted to the Program Checkout Facility by the Dump Analyzer are not those expected Send a STAR Station Bad parameter given when trying to delete a Management station Site Management Bad parameter given when calling site management primitives Date and Time Unknown format of date or time Handling Banners Unknown type of banners The subroutine sort structure s such as Sort Communication Area Sort Definition Sort Run Time segments are either not properly initialized or they are erroneously addressed Correct the source program calling SORT and or linker commands If this occurs in a system processor calling sort contact the Service Center Automatic Syntax error Check the operator message Resource Manager Dynamic An incorrect parameter has been detected on Addresser entering a procedure Modify the caller s code Loader Internal interface error Contact the Service Center 51 11 Messages and Return Codes Directory Task Management 1 The value of the LENGTH parameter of the VMM System Output System Trace Collector TDS TPR Operation TP7 0 SICID TP7 52 SICID XCP2 Unit Record Driver GET Diskette OPEN UFAS EXTENDED 51 12 external primitives H_ BEGTSK H_ABTSK or H_WAITSK or of the i
486. n attempt has been made to write to a tape file which has a native label but is of non standard format DFPRE 17 IFNERR An invalid ifn has been specified DFPRE 17 INVUSE Current user is not allowed to release SFINITed files DFPRE 17 IOFAIL An irrecoverable I O error has occurred when accessing a system file DFPRE 17 MDERR When a file was being assigned for partial processing an incorrect value was specified for the LASTVOL parameter DFPRE 17 NOTOPEN The specified ifn is not open and deassign has not been requested DFPRE 17 NOWAIT Set in the following cases The ifn is being accessed by another primitive There is an access conflict with another primitive of the same process group DFPRE 17 REPNEED The volume cannot be correctly repositioned so no end of file label has been written DFPRE 18 COUNTERR The number of blocks read by the access method on input does not correspond to the number of blocks written DFPRE 18 DATALIM A CLOSY has been performed for the last volume of a file DFPRE 18 DUMMY A file with a dummy ifn has been successfully closed 57 14 47 A2 10UJ 47 A2 10UJ DFPRE 18 FUNCNAV DFPRE 18 IFNERR DFPRE 18 NOCURREC DFPRE 18 NOTOPEN DFPRE 18 NOTOPENV DFPRE 19 CONFLICT DFPRE 19 DATALIM DFPRE 19 EXHAUST DFPRE 19 FUNCNAV DFPRE 19 LEVVIOL DFPRE 19 NOCURREC DFPRE 19 NOTOPEN DFPRE 19 WRONGPMD DFPRE 20 ALREADY File Management Return Codes in Mo
487. n code indicates the reason It is usually a system error but it may be due 47 A2 10UJ MAC Messages to the action of another processor such as the MAINTAIN LIBRARY command LIST which has accessed the member during the short time between closing and renaming Result Processing of the current unit stops The old output member if there is one and the new output member are deleted Processing of the next unit if any begins Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC25 OPENS IN UPDATING OUTPUT CR101 FOR output_unit_name RC edited_return_code Meaning An error has occurred while updating the SSF unit header of an expanded member in the output library The return code indicates the reason It is usually a system error but it may be due to the action of another processor such as the MAINTAIN LIBRARY command LIST which has accessed the member during the short time between renaming and reopening Result The processing of the current unit contains errors but the expanded member is available Processing of the next unit if any starts Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC26 GET IN UPDATING OUTPUT CR101 FOR output_unit_name RC edited_return_code Meaning An error has occurred while updating the SS
488. naming rules e g a simple name is greater than 16 characters Result The utility is not performed Action Check the file name object name DIRECTORY NAME SYNTAX ERROR Meaning A directory name specified as a parameter of the utility does not follow the catalog naming rules e g a simple name is greater than 16 characters Result The utility is not performed Action Check the directory name object name FILE ACCESS RIGHT VIOLATION Meaning The project does not have sufficient access rights to perform the operation on the specified file e g CATALOG UNCAT and CATMODIF need the OWNER access right SHIFT needs the RECOVERY access right Result The utility is not performed Action Check the project access rights 8 13 Messages and Return Codes Directory DCT100 object name DIRECTORY ACCESS RIGHT VIOLATION Meaning The project does not have sufficient access rights on the directory specified to perform the operation requested e g CATMODIF or UNCAT need the OWNER access right Result The utility is not performed Action Check the project access rights DCT101 object name FILE REMAINS CATALOGUED SPACE STILL ALLOCATED Meaning The deletion of a file catalog entry UNCAT utility has been requested but the catalog still contains a valid media list for the file e Ifthe operation requested was to delete a cataloged file i e deallocate space and remove the catalog entry the two operations m
489. nd the last job to be selected has not been found in the input file Result All the jobs starting from the first job selected if specified up to the last job in the input file have been selected Action Check the RUN statement and the input file IN13 CR ron JOB READING STOPPED END Meaning Execution of the RUN statement has been stopped by operator intervention either by a Cancel Request command or by a TERMINATE_SYSTEM command Result Only jobs read before the execution of the command are entered INPUT ERROR IN14 JOB READING STOPPED JOB MAX NUMBER ENDJOB COMMAND FOUND Meaning The execution of the RUN statement has been stopped for the reason specified in the message INPUT ERROR means the input file was a dummy file JOB MAX NUMBER means the limit on the number of jobs known by the system was reached ENDJOB COMMAND FOUND means THAT THE ENDJOB JCL statement was found but there was no JOB JCL statement 22 2 47 A2 10UJ IN Messages IN15 INPUT FILE UNKNOWN Meaning The file specified in the JCL statement RUN has not been found on the specified volume Result No job is introduced Action Check the JCL statement RUN IN17 nn RECORDS BETWEEN JOBS Meaning Several records in the input file have been found outside a job enclosure JOB and ENDJOB or a data enclosure This message may appear when errors have been discovered in a JOB JCL statement causing the statement to be
490. nd TDS Master MU79 ERROR ON PMOS COMMAND RECEIPT Meaning Interface error concerning a PMOS command Action Consult the Service Center Use the SEND_TDS command to enter the command in line mode Type of message Warning Dump taken Yes Recipient of the message Main Operator and TDS Master MU80 ERROR DETECTED WHILE DYNAMICALLY ASSIGNING TDS SYSTEM FILE Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU81 ERROR DETECTED WHILE OPENING TDS SYSTEM FILE Action None internal error 29 18 47 A2 10UJ MU and MV Messages Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU82 ERROR DETECTED WHILE CLOSING TDS SYSTEM FILE Action None internal error Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU83 UFAS GAC OR COMMIT MANAGER CONTROL STRUCTURES DAMAGED Action None internal error A recovery procedure will dynamically restart the system with no shutdown of the network Type of message Fatal Dump taken Yes Recipient of the message TDS Master MU84 ABORT DUE TO SWAP REORGANIZATION NEXT RESTART WILL BE COLD Meaning This message appears the first time you run a TDS application after UFAS EXTENDED has been installed at your site and the TP7GEN utility was not run Action Run the TP7GEN utility Type of message Fatal Dump taken No Recipient of the messa
491. neric explanation COBOL Status Key value If a return code is explained in more detail for a particular system component this information is given after the generic explanation There are three columns of information as follows System Component Operation Explanation or Cause The first column System Component gives the name of a system component or utility program from which a return code may have originated for example TDS File Management Unit Record Driver BFAS Sequential Disk File Handling If you want more information about a particular part of the system consult the appropriate user s manual In general the user cannot directly access entries marked internal or system The second column Operation contains entries for the operation e g COBOL verbs Transaction Processing Routine commands performed within the corresponding system component of the first column The third column gives an explanation of the return code and recommended action Some return codes for example DONE ALREADY do not indicate an abnormal condition and consequently do not require any corrective action There is a list of abbreviations used in the Interpreting Return Codes Section RESNAV 0A15 Resource not available 47 A2 10UJ 54 1 Messages and Return Codes Directory RESOURCE RESVIOL RETRY 54 2 Buffer Management Resource Status Dump Analyzer Dynamic System In allocation mode the maximum possi
492. ng Dump taken No MU30 PROCESS EXCEPTION INSIDE TDS CODING Action Reload TDS internal error within TDS or UFAS EXTENDED Type of message Fatal Dump taken Yes Recipient of the message TDS Master 47 A2 10UJ 29 7 Messages and Return Codes Directory MU31 MU32 MU33 MU35 29 8 DEBUG FILE CANNOT BE OPENED Action Ensure that the ASSIGN DBUGFILE statement in the TDS step enclosure is correct A detailed reason will be given in the TDS JOR Type of message Warning Dump taken No Recipient of the message TDS Master ERROR WHILE OPENING DEBUG SUBFILE Action None internal error Return code is displayed at the user terminal Type of message Warning Dump taken No Recipient of the message TDS Master ERROR WHEN CLOSING DEBUG SUBFILE Action None internal error reported but does not prevent TDS from executing Type of message Warning Dump taken No Recipient of the message TDS Master ERROR WHILE WRITING TO DEBUG SUBFILE Action None internal error reported but does not prevent the TDS application from executing The return code is displayed on the user terminal The DEBUG file is probably full Type of message Warning Dump taken No Recipient of the message TDS Master ERROR WHILE SENDING FOR TRACES Action None internal error reported but does not prevent the TDS application from executing Type of message Warning Dump taken No Recipien
493. ng A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given Action The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the vacant entries are insufficient linkage problem UNABLE TO CREATE SEGMENT Meaning A return code from H_SGCR is given 42 33 Messages and Return Codes Directory TD35 07 TD35 08 TD35 09 TD35 10 TD35 11 TD35 12
494. ng Internal error ABNORMAL H_INITSK Return code Meaning Internal error END OF DYNAMIC SAVE SERVICE JOB REQUESTED Meaning Message for future use EXCEPTION IN MODULE H_DFSRD_SRV Meaning Indicate the module where the exception has arisen ABNORMAL H_WAITSK Return code Meaning Internal error Module H_Dfsrd_Wait DYNAMIC SAVE NOT PURCHASED Meaning Self explanatory H_CRFD H_WRKFIL Meaning Abnormal Return Code of the given primitive H_RFLDEF SOURCE H_WRKFIL Meaning Abnormal Return Code of the given primitive H_DFLDEF H_WRKFIL Meaning Abnormal Return Code of the given primitive 47 A2 10UJ DU Messages DU98 H_RFLDEF ALLOC H_WRKFIL Meaning Abnormal Return Code of the given primitive DU98 FIRST H_RTVLID H_WRKFIL Meaning Abnormal Return Code of the given primitive DU98 H_RTVLID H_WRKFIL Meaning Abnormal Return Code of the given primitive DU98 H_RTCAT S_WKEFN_CAR50 Meaning Abnormal Return Code of the given primitive DU98 WORKFILE CATALOG NOT AUTO ATTACHED IS FORBIDDEN Meaning If the WORKFILE is catalogued it must be in an auto attached catalog or in the SITE catalog DU98 WORKFILE MAY NOT BE TEMPRY Meaning The WORKFILE must be a permanent file not TEMPRY whether pre allocated or not See other mandatory characteristics in the corresponding chapter DU98 WORKFILE SHARE MUST BE ONEWRITE Meaning Self explanatory DU98 WORKFILE ACCESS MUST BE READ IN SAVE
495. ng Deferred Updates may remain unstable Action Execute the utility FILREST followed by ROLLFWD for each file concerned jasname efn USER FILE DYNAMIC ROLLFORWARD SUCCESSFUL ROLLED FORWARD RECORDS n Meaning Dynamic rollforward was successful Action None Destination of the message JOR of the concerned TDS jasname DYNAMIC ROLLFORWARD CANNOT BE PERFORMED return code Meaning It is impossible to create the resources segment file etc for a dynamic rollforward Action Execute the utility FILREST followed by ROLLFWD for each file concerned Destination of the message JOR of the concerned TDS 24 7 Messages and Return Codes Directory JP64 JP65 JP65 JP65 JP65 24 8 jasname DYNAMIC ROLLFORWARD FAILURE READ ERROR ON JOURNAL FILES Meaning The dynamic rollforward mechanism cannot read the After Journal Files The system does not know which file or TDS is involved Action Execute the utility FILREST followed by ROLLFWD for each file concerned Destination of the message JOR of the concerned TDS jasname efn USER FILE DYNAMIC ROLLFORWARD NOT PERFORMED UNABLE TO CREATE A FD FOR THIS FILE return code 01 jasname efn USER FILE DYNAMIC ROLLFORWARD NOT PERFORMED UNABLE TO ASSIGN THIS FILE return code 02 jasname efn USER FILE DYNAMIC ROLLFORWARD NOT PERFORMED UNABLE TO OPEN THIS FILE return code 03 jasname efn USER FILE DYNAMIC ROLLFORWA
496. ning The compiler was unable to delete the old version of the CU in the CU library The reason for the incident is given by the return code Such an incident is very unusual and may indicate a system error Result The compiler proceeds Action Use the LIST command of the LIBMAINT CU to check the contents of the library If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary GPL24 CLOSES CULIB WORK MEMBER member name RC edited return code Meaning The compiler was unable to CLOSE the CU work member The reason for the incident is given by the return code This kind of incident is very unusual and may indicate a system error Result The compiler stops The old version of the CU is available in the CU library Action Use the LIST command of the LIBMAINT CU to check the contents of the library If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary 20 8 47 A2 10UJ GPL25 GPL26 GPL27 GPL27 47 A2 10UJ GPL Messages STOW DELETE CULIB ALIAS alias name OF member name RC edited return code Meaning An old version of the CU being created exists in the library The old version of the program had a secondary entry point or data SYMDEF with names cataloged in the CU library as alias names of the main entry point The compiler is deleting these
497. nloading the schema subschema The return code gives the reason for the error This message usually indicates a system error Result In Batch the step execution is aborted Action Contact the Service Center 9 14 47 A2 10UJ DDM Messages DDM00416 lt error localization gt UNEXPECTED RETURN CODE WHEN OPENING FILE ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name RC edited return code Meaning An abnormal condition has been detected when a DML statement READY refers explicitly or implicitly to the file specified The return code gives the reason for the error This message usually indicates a system error Result In a Batch environment the step execution is aborted Action Contact the Service Center DDM00417 lt error localization gt NO FILE IS ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name Meaning A DML statement READY refers explicitly or implicitly to the file specified but there is no associated ASSIGN statement for it with the ifn in the JCL Note that when a program does not use all the areas of the data base any areas used must be given explicitly in the DML statement READY Result In a Batch environment the step execution is aborted Action Provide the necessary JCL statement ASSIGN or correct the program DDM00418 lt error localization gt EFN ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name IS UNKNOWN Meaning The area
498. nput Process Output Process System Nucleus Dynamic Addresser TDS Any TPR Operation UFAS and UFAS OPEN EXTENDED Indexed 47 A2 10UJ DATANAV to IOFAIL Return Codes File identification error File identification error The FILE_ID parameter should not have been present since the file identification was statically defined when the session was opened File identification missing File identification missing The FILE_ID parameter should have been present dynamic multiplexing File not available 1 The data base file is not an integrated file 2 Error when loading a schema It was not possible to allocate a TDS journal Send the PRLOG log to the Service Center The library specified in the SAVE or LOAD parameter of the CRNETGEN command is not a binary type library Correct the CRNETGEN command and rerun it Invalid file or file not open TRID26 The SORT input file definition is not correct TRID27 The SORT output file definition is not correct For both of the above cases correct the JCL GCL command Generally at least one parameter value in BLKSIZE RECSIZE is not positive The file is not available due to a failure in system initialization Contact the Service Center File in alert status and must be recovered before it can be opened For IDS II areas the return code corresponds to one of the following cases the assigned area is not an IDS II area the assigned area name is not the name declared
499. nquiry or monophase transaction or transaction aborts due to the TDS supervisor with ORACLE in synchronous mode 0019 Request not done please retry 47 A2 10UJ IOF TDS Any Operation RGENERR 1873 Network Generation RGENUNKN 101F Catalog Management UNCAT RIMISS 1838 RWI RISTKOV where i 0 1 2 or 3 System Nucleus VMM RLAPUNKN 102C Catalog Management CATALOG RLBPUNKN 102B Catalog Management CATALOG 47 A2 10UJ RESNAV to YETALLOC Return Codes Interactive Resource Manager and Task Management are trying again to process asynchronous events during H WAITLONG Attempt to open or close a file that is being closed by someone else Wait and check the state of the file The TDS tables are full Try again later Relative generation error Relative generation error during incremental telecommunications generation A new incremental generation might have been performed Run the GRNETGEN utility to generate new tables Relative generation unknown on volume The relative generation number has not been found in the catalogs referenced Check the catalog contents against the JCL Request identification is missing The RI parameter should be present asynchronous operation Stack overflow on stack of ring 1 The user is aborted Relation application project unknown The relation application project does not exist in SITE CATALOG Relation billing project unknown The relation billing pro
500. nt PARAMETER ERROR Meaning An illegal keyword value for an execution option has been detected Result The utility is not performed Action If the utility was started using basic JCL check the contents of the OPTIONS parameter of the STEP JCL statement If the utility was started by a Start Job command check the parameters specified in the SJ command UNKNOWN KEYWORD Meaning An unknown keyword for an execution option was found in the options string OPTIONS parameter of STEP JCL statement Result The utility is not performed Action Check the contents of the OPTIONS parameter of the STEP JCL statement OPTION ERROR Meaning Incompatible execution options were found in the options string OPTIONS parameter of STEP JCL statement Result The utility is not performed Action Check the contents of the OPTIONS parameter of the STEP JCL statement START VALUE NOT FOUND Meaning A start date was specified in the options FROM parameter indicating that all the messages appearing on the console after this date should be printed Due to the circular organization of the SYS LOGC file the file does not contain all the messages since new messages may have overwritten the older messages The oldest available message is after the specified date Result The utility is not performed Action Use the FROM BEG option to print starting at the oldest available message 47 A2 10UJ CL Messages CL
501. nternal primitive H_RDTKDR is invalid it is lt 0 or gt 31 2 Exception when trying to access the NAME argument of the H_ABTSK external primitive Check the activation context of the H_ABTSK primitive 3 Invalid arguments provided to the H_BEGTSK external primitive or to the H_INITSK internal primitive Check the activation context of the H_ABEGTSK primitive The input argument is invalid or not accessible or the object referred to is in a state which does not allow it to perform the requested action Contact the Service Center Software problem due to either OWQ tables which are not coherent or an output with a non standard priority FF Contact the Service Center The activation parameters of the Trace Collector in the file TRC_INIT COLLECTOR are incorrect COBOL SYMBOLIC QUEUE within output CD or device name separated by 1C syntax Invalid value for LEVEL or ABORT LEVEL parameters in the Supervise TDS command Check the parameters Refer to the TDS Administrator s Guide Invalid value for TPR or USE_ PROC parameters given in the Load Unload_TDS_ Memory command Check the parameters Refer to the TDS Administrator s Guide Wrong number or type of parameters for a TDS XCP2 verb Refer to the CPI C XCP2 User s Guide ALN value is negative 1 NUMBUF value is negative 2 BPB value is negative 3 Invalid bad track number foreign processor One or more parameters of the primitive are incorrect
502. ny TPR Operation 1008 The system cannot find the item it expected For example a commitment unit is declared without any protection the SUPPRESS BEFORE clause of TDS and then tries to update a record of a journalized file Record missing transmission aborted Device not in FORMS mode Abnormal sequence for TDS XCP2 verbs Refer to the CPI C XCP2 User s Guide Unsuccessful block serial number checking Inspect BSN NBSN parameter entry 1 The ISO session services are not available on your site 2 The current action is not possible in the present session context Check that the ISO session product is on your site Check the ISO configuration and use the User VCAM trace to analyze the problem Session opening rejected Overflow for X gt 174 67 There is an exponential function overflow for X gt 174 67 simple precision ARG less than 200 underflow There is an exponential function underflow for X lt 200 simple precision Negative argument ARG gt 56 overflow Too many subfiles open Too many users in TRACE print mode DIRSIZE parameter value in tds name DEBUG file is too small to accommodate all users Subfile name is unknown 47 A2 10UJ SGAMNG SGAMNGA SGAMOV SGAMUN SGAMZR SGAMZRA SGENERR SGENUNKN SGNAV SGNMERR 47 A2 10UJ Any Access Method OPEN COBOL RTP FORMS IOF Job Management OMH 1A3C 1A38 1A37 1A3A 1A39 1A3B 1
503. obe could not be set in system SM Dynamic Addresser Data not available as the SMCS was damaged before the end of the step Modify the user code OPEN File data lost due to a crash during creation OPEN The file has been left in unstable state while in OUTPUT mode Recover or recreate the file ARG gt Underflow arctanh ARG too near N PI from below ARG too near to N PI from above ARG gt 10 15 loss of precision ARG gt 175 36 overflow cosh Deadlock TDS Cleanpoint Restart Resource Locking A cleanpoint has been requested for a Commitment Unit that has already been aborted A job has been aborted due to a deadlock It is automatically restarted at the last programmed COMMIT or at the beginning of the step if no COMMIT was executed previously The job is first rolled back to that point A deadlock situation has been detected during the initialization of the collector Contact the Service Center Collector 47 A2 10UJ DEBUG 0003 DEFTRACK 1E08 File Management RWI DESCERR 186F Job Management System Nucleus DEXPOV 1A02 Mathematical Package DEXPUN 1A5E Mathematical Package 47 A2 10UJ File Storage and Tape Handling Load Module Loader Loader DATANAYV to IOFAIL Return Codes Debugger must be called In the course of standard Break processing the user must call the Program Checkout Facility H_DEBPR_ECONS Defective track In the course of standard
504. ocess state error 1 The task occurrence to activate with the H_BEGTSK external primitive or with the H_INITSK internal primitive is either started or suspended Check the activation context of the H_BEGTSK primitive 2 When using the H_WAITSK external primitive or the H_WTPCS internal primitive the specified task occurrence or process is not yet started Check the activation context of the H_WAITSK primitive 3 The task or process whose ABORT was requested H_ABTSK or H_ABTPCS internal primitive was not yet started Ensure that the H_BEGTSK GPL or the H_INITSK internal primitive was executed before using the H_ABTSK GPL or the H_ABTPCS internal primitive Password violation Password missing or invalid Correct program Process timer overflow Process Timer Management specified value too large The control interval must be purged Invalid buffer status Contact the Service Center 47 A2 10UJ QASCUD QAT2ZR QATNHUN QCOTLOW QCOTOV QCOTPREC QCSHOV QEXPOV QEXPUN QFACNG QFACOV QFNACCES QFNAV QGAMNG QGAMNGA QGAMOV QGAMUN QGAMZR QGAMZRA QLGMNG QLGMNGA QLGMUD QLGMUN QLOGNG QLOGZR 47 A2 10UJ 1A2F 1A32 1A7E 1A2B 1A2A 1A2C 1A68 1A03 1A5F 1A52 1A51 00c2 OA41 1A58 1A54 1A53 1A56 1A55 1A57 1A59 1A5A 1A5B 1A5C 1A09 1A08 IONOP to RESIDENT Return Codes Und
505. ocessed in append mode e in the PRTLIB the listing of the procedure procname is stored in the member procname_L and replaces the one created by a previous compilation of procname GPL K14 ERROR WHEN READING member name FROM INLIB GET RC edited return code GPL A61 ERROR WHEN READING member name FROM INLIB GET Meaning The compiler was unable to read a source record either from a user library or from the standard SYS IN library The reason for the incident is given by the return code Such an incident is very unusual and may indicate a system error Result The member is not compiled control passes to the next one Action If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary GPL K15 THE SOURCE MEMBER member name IS EMPTY Meaning The specified member given as input to the compiler contains no records Result Compiling stops If several compilations were requested the compiler goes on to the next one GPL18 OPENS CULIB OLD MEMBER member name RC edited return code Meaning The compiler was unable to access the member containing the old CU version of the program being compiled to replace it by the new version The return code indicates the reason for the incident which is probably due to a system error Result Compiling stops Action Refer to message GPL15 20 6 47 A2 10UJ GPL Messages GPL19 procname IS
506. ocessing 57 3 File Processing Preparation 57 4 INTERNAL FUNCTIONS For Service Center Use Only 57 5 File Management In The Transactional Context Restart Facility 58 TDS Return Codes in More Detail 58 1 Tpr Transaction Abort Codes 58 2 Tds Return Codes On M Open M Close 59 XBUP Messages 47 A2 10UJ Table of contents A Completion Codes for I O Errors Awl Cartridge TAPE ERRORS isr a aeaea a a A a AE E iene A 1 A2 Tape Eor oppineen an Ee EE NN Ea EERE E EREEREER S A 2 As Disk Emor Oa aea hl dete Ar a aaar Sa eee AENEA ee diene ieee ee A 4 47 A2 10UJ xi Messages and Return Codes Directory xii 47 A2 10UJ 47 A2 10UJ 1 The Job Occurrence Report This section describes the Job Occurrence Report JOR that contains among other things messages and return codes If you want a more detailed description of the JOR refer to Section 7 of the JCEUer S GUMA enea PT a e aaa aaa 47 A2 12UJ What is the JOR The Job Occurrence Report is a system report produced for each job run unless specified otherwise in the JCL JOB command on the system and for each data enclosure entered What does the JOR do The JOR e describes the work submitted to the system and lists the Job Control Language JCL of that job e describes the operations in order that take place when a job executes Whenever a step executes there are message
507. ode Meaning MACPROC was unable to close the specified member of a retrieve or store library The return code indicates the reason Such an incident is very unusual and may be due to a system error Result Processing stops Messages in the JOR indicate which units have been processed If the member concerned belongs to a store library the old current member if any is available Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC56 PUT MACRO LIBRARY FOR store_member_name RC edited_return_code Meaning MACPROC was unable to write a record to the library specified by the STORE parameter The return code indicates the reason The return code DATALIM means that the library is full and cannot be extended Result Processing stops Messages in the JOR indicate which units have been processed The old current store member if any and any store members already processed may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC57 CLOSE STORE FOR store _file_efn RC edited_return_code Meaning MACPROC was unable to close the file specified by the STORE parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result Processing stops Messages in the JOR indicate which units have been p
508. ode values are in ascending numerical order under each category A 1 Cartridge TAPE ERRORS TBL NI Type of Error Code Value Device Condition TBL NI EOF BOT 9101 Logical EOF 9102 Operational Check TBL NI Media unavailable 9208 Write protect 9210 47 A2 10UJ A 1 Messages and Return Codes Directory A 2 Device reserved 9240 Unequal length check 9280 Repositioning needed 92FF Hardware Check TBL NI ID BURST not 9400 detected Controller fault 9400 Retry failure 9404 Cartridge failure 9408 Overrun 9440 Device fault 9440 Data Errors TBL NI Read Write error 9804 ID burst error 9808 Tape positioning error 9840 Channel parity error 9880 Program Check TBL NI Program release B001 Function mask B002 violation Function mask reject B004 Resume error B008 Illegal sequence B010 Illegal data B020 Illegal count B040 Illegal CCE B080 47 A2 10UJ Completion Codes for I O Errors A 2 Tape Errors TBL NI Type of Error Code Value Comments Device Condition TBL NI EOF BOT 9101 Logical EOF 9102 End of tape 9110 Handler loss 9120 Operational Check TBL NI Media unavailable 9208 Write protect 9210 Device problem remount tape on a different drive Device DLI reserved 9240 Unequal length check 9280 Either system fault or indicates that the label length given in the JCL is incorrect Check occurs during file open R
509. odule This rank is useful for maintenance purposes A rank corresponds to only one point in the module code This is particularly useful when the message text is general i e 12 1 Messages and Return Codes Directory Abnormal Return Code of a given GCOS 7 primitive If the rank is 10 in the module H_DFSRD_PLUG then the message begins with DU94 text 12 1 Module H_Dfsrd_Clone DU90 EXCEPTION IN MODULE H_DFSRD_CLONE Action Indicate the module where the exception has arisen DU94 SERVER TERMINATION RUNNING BYPASS VOP Meaning Synchronization instructions are bypassed when the TERMINATE operation is running It may be after a TDYNSVR GCL command normal or after an abort of the dynamic save server abnormal 12 2 Module H_Dfsrd_Dynjp DU94 SERVER TERMINATION RUNNING BYPASS POP SERVER TERMINATION RUNNING BYPASS VOP Meaning Synchronization instructions are bypassed when the TERMINATE operation is running It may be after a TDYNSVR GCL command normal or after an abort of the dynamic save server abnormal DU91 EXCEPTION IN MODULE H_DFSRD_DYNJP Action Indicate the module where the exception has arisen 12 3 Module H_Dfsrd_Ficb DU92 LIST OF SAVED FILE S DU92 FICB_FILENAME Action Indicate the file name for this file DU92 FILE ENTRY NOT FOUND IN H_KNODET Meaning Internal error 12 2 47 A2 10UJ DU Messages DU92 ABNORMAL RC WHEN UNLOCKING FICB DU
510. og to the Service Center Shortage of buffer space Some message data not transferred The buffer is not available because the buffer address is either in a segment which is not a buffer segment or not locked or the requested transfer to tape or disk starts less than 32 bytes of a page boundary Check the buffer addresses If the buffer is not an XAS segment it must be accessed directly ISD NOT PERMIT Buffer size gt UMADR The specified segment is not a buffer Internal error Contact the Service Center Abnormal processing of a buffer segment attributes size buffer address ENBAP IO semaphore SSMGET Verify the STEP options SIZE POOLSIZE number of files If these are correct contact the Service Center BPB BLOCKSIZE greater than 64K bytes Diskette 1206 Buffer number overflow not enough in the working pool TDS Any TPR Number of TDS file buffers exceeds the number Operation specified at TDS generation Switching to Before Journal is not possible Increase buffer pool size or add Before Journal 51 17 Messages and Return Codes Directory BUSY 0200 UFAS and UFAS READ WRITE EXTENDED REWRITE Availability Control Set Function Mask Set Operating Mode Catalog Management ATTACH CATDELET File Management File Storage and Tape Handling Journalization GAC Resource Allocation GCL Network Generation 51 18 The object of the request is still working The number of buffe
511. oherence units which have already written the file to save It gives these units LOCKID OF A TDS CU TO WAIT FOR lockid number Meaning At the beginning of the save the server waits for the end of the coherence units which have already written the file to save It gives these units 47 A2 10UJ DU Messages DU99 NUMBER OF TDS CU TO WAIT FOR decimal value Meaning At the beginning of the save the server waits for the end of the coherence units which have already written the file to save It gives these units DU99 WAITTAB INSTABILITY Meaning Internal error DU99 EXCEPTION IN MODULE H_GAC_INITSV Action Indicate the module where the exception has arisen 47 A2 10UJ 12 19 Messages and Return Codes Directory 12 20 47 A2 10UJ 13 DUF Messages General Environment DUF messages are produced by the UFAS component of the system The first set of messages are output by UFAS when the GCOS 7 operating system in use is not a large system Pertinent Manuals UFAS User s Guid sa 8 ote en hak stents ta ete en et aa ys a suas tas 47 A2 0O1UF UFAS EXTENDED User s Guide vicccccccccccsssssesssesesseesesesssssssesesenesensnesensaes 47 A2 04UF 13 1 Ufas Message Descriptions DUFO1 IFN ifn REUSE BUFFER number of reuse Meaning This message gives the number of times a buffer has been reused for the specified file The value given can be used to optimize the buffer managemen
512. on Create an entry in SITE CATALOG and retry CATMODIF NBOBJ MUST NOT EXCEED 10000 FOR ALLOCATION ON A VBO DISK Meaning The maximum number of objects for creating or extending a catalog on a VBO disk volume is 10 000 Result The utility is not performed KEYWORD CYL NOT SIGNIFICANT ON A FBO DISK Meaning There is no equivalent function for FBO disk volumes When creating a catalog on a VBO disk volume you can specify the address of the beginning of the allocation with the CYL keyword Result The utility is not performed DOWNWARD MIGRATION V5 V4 NOT SUPPORTED Meaning During a MOVE_PROJECT you tried to replace on the output site catalog a project using the pre V5 format 32 byte record with a project having the same name but in V5 format 84 byte record Result The utility is not performed Action Delete the project on the output site FORWARD UPGRADED PROJECT CAN T REPLACE A PRE_FBO ONE Meaning During the execution ofa MOVE_PROJECT in V5 projects using the pre V5 format 32 byte record are transformed by default into the FBO record format 84 byte record before being on the site catalog The transformed projects cannot overwrite a PRE_FBO cataloged format project having the same name on the site catalog 8 7 Messages and Return Codes Directory Result The utility is not performed Action Delete the project on the output site or use the NUPGRADE option DCT52 object name SOME
513. one file extent and or media is not available due to an incorrect media list in ASSIGN or a partial duplication of the file The file can only be accessed for read operations Correct the ASSIGN media list There are too many extents in the sort workfile There are too many little holes on a private or resident disc volume s Change the sort work file assignment or clean up the files allocated on the volume s on which the error occurred Some volume s or a multivolume file are missing The mounted volume is not the first volume of the file This may be an internal extent error Space extension forbidden Maximum number of extents reached Number of extents requested is greater than the number available on the mounted volumes Mount more volumes or correct the program A workfile has more than 16 extents If the file is temporary or computed by SORT the error may be in file management 47 A2 10UJ FAILURE 0480 O4BF FECBERR 1831 RWI FECBVIOL 1631 FEND1LIM 0035 FILEMARK 00E4 FILEMIG 0A1D File management File assignment ARS FILENASG 0902 System Interface WithInitiation of SORT DATANAYV to IOFAIL Return Codes Software IO failure FECB error arg is not an active FECB FECB error The specified argument FECB or FILE_ID does not pertain to a valid FECB Invalid access to an FECB Full form 1 and form limit reached File mark recognized File cataloged as migrated out The file is cataloge
514. or 2 Enabling is aborted due to the concurrent running of NETGEN rerun the NETGEN utility or 3 Loading enabling an incremental generation is in progress try again after the CRNETGEN utility finishes running 47 A2 10UJ PCF RWI SORT MERGE SBR Collector Automatic Resource Management Dynamic Addresser System Nucleus System Nucleus Dynamic Addresser VMM TDS Any TPR Operation UFAS EXTENDED 47 A2 10UJ ABNCCAD to DATALOSS Return Codes The Program Checkout Facility cannot retrieve its command table Collect all relevant information then contact the Service Center 1 Session Busy Temporarily the session cannot be accessed because another RWI primitive is being executed for this session 2 Volume busy For the H_ RWLOCK primitive this return code signifies that the lock attempt has failed See the description of the H_RWLOCK primitive for more information 1 TRID1 Incorrect SORT call nesting there is the same Sort Communication Area for 2 nested Sorts 2 TRID4 The work file share is abnormal or there are too many nested sorts with the non preassigned work file Correct the source program If this occurs in a system processor calling SORT contact the Service Center Another SBR collector is already active Terminate the current collector before starting a new one The dimension is busy Check the operator message SM used by another process group and cannot be
515. orrect trace dump buffer size on a TRCBUF command in the collector initialization file Check the collector initialization commands TDP class open in a trace buffer without TD pages Check the collector initialization commands Incorrect TD buffer page size on a TRCBUF command in the collector initialization file Check the collector initialization commands TRCBUF command without TRCFILE keyword in the collector initialization file Check the collector initialization commands Incorrect TRCFILE number on a TRCBUF command in the collector initialization file Check the collector initialization commands TRCFILE index greater than maximum on a TRCBUF command in the collector initialization file Check the collector initialization commands Incorrect domain name in a TRCBUF enclosure in the collector initialization file Check the collector initialization commands More than maximum allowed trace domains definitions in the collector initialization file Check the collector initialization commands Incorrect trace domain index value in the collector initialization file Check the collector initialization commands Trace domain index greater than version high bound in the collector initialization file Check the collector initialization commands Duplicate trace domain name index definition in the collector initialization file Check the collector initialization commands An incorrect trace domain memory classes status in the collector in
516. ort file The reason is given by the return code The most common user error is RC EFNUNEN the report file specified has not been found on the indicated volume Result The compiler proceeds but the listing is produced in the standard SYSOUT The listing will be deleted after being printed Action Correct the JCL if relevant or contact the Service Center GPL K3 ERROR WHEN OPENING THE INLIB RC edited return code Meaning The GPL compiler failed to OPEN the file containing the source program s to be compiled The file can be either a library or an input enclosure The reason is indicated by the return code The most common return code is EFNUNKN which indicates that the library specified in the INLIB parameter of the JCL statement GPL has not been found on the specified volume Result No compilation is performed Action Correct the JCL if relevant or contact the Service Center 20 2 47 A2 10UJ GPL Messages GPL K4 ERROR WHEN OPENING THE CULIB OBJECT CODE WILL NOT BE PRODUCED RC edited return code Meaning The GPL compiler failed to OPEN the library where the produced objects should be stored The reason is indicated by the return code Such a message is very unusual when a temporary CU library is used When a permanent CU library is used the most common error is RC EFNUNKEN indicating that the library specified in the CULIB parameter of the JCL statement GPL has not been found on the specified vol
517. os Twos TW09 TW10 TW11 46 8 lt Rxxxx gt UNABLE TO DELIVER RC 283B1E02 gt TW 11 DATAERR Meaning Error detected by the PRT1262 NIP3 printer in the source in POSTCRIPT language Who receives the message The SUBUSER submitter of the report lt Rxxxx gt UNABLE TO CONNECT lt dest gt NOT DECLARED AS NIP3 Meaning The terminal is a PRT 1262 NIP3 printer but it has not been declared as NIP3 in the TERM statement at GTWriter generation Who receives the message The SUBUSER submitter of the report lt Rxxxx gt UNABLE TO CONNECT lt dest gt IS NOT A NIP3 Meaning The terminal has been declared as NIP3 in the TERM statement at GTWriter generation but it is not really a NIP3 Who receives the message The SUBUSER submitter of the report lt Rxxxx gt REPORT CANCELLED BY SYSTEM This message follows a TW08 message which indicates the reason why the report has been cancelled Meaning Because of a file access problem GTWriter could not start the report and cancelled it Who receives the message The SUBUSER and possibly the TWCOMMSUB if there is a return code problem lt command gt ILLEGAL SYNTAX Meaning Error in the syntax of the command Who receives the message The COMMANDSUB lt RxXxxx gt REPORT HELD BY SYSTEM Meaning GTWriter puts the report in the HOLD state Either 1 the destination of this report is unknown to the network In this case the TW11 messag
518. p execution is aborted Action Check the file name and volume name provided in the ASSIGN statement DDM00389 lt error localization gt THE FILE ASSIGNED TO IFN DDLIBi IS NOTA LIBRARY Meaning An ASSIGN statement of ifn DDLIBi which would define a library where the object schema is to be searched specified a file which is not a library Result In a Batch environment the step execution is aborted Action Check the file name specified in the ASSIGN statement DDM00390 lt error localization gt THE LIBRARY ASSIGNED TO IFN DDLIBi IS NOT OF TYPE BIN Meaning An ASSIGN statement of ifn DDLIBi which would define a library where the object schema is to be searched specified a library whose type is different from BIN and therefore it cannot contain object schemas Result In a Batch environment the step execution is aborted Action Check the file name specified in the ASSIGN statement 47 A2 10UJ 9 7 Messages and Return Codes Directory DDM00391 lt error localization gt NO SUBSCHEMA subschema name SCHEMA schema name HAS BEEN FOUND IN LIBRARY ASSIGNED TO IFN DDLIBi Meaning At schema subschema loading time IDS did not find the requested object schema subschema in the library specified in the JCL statement ASSIGN area ifn Result In a Batch IOF environment the step execution is aborted Action Check the JCL statement ASSIGN area ifn DDM00392 lt error localization gt NO SUBSCHEMA su
519. pecified the processing of the current unit stops and the processing of the next unit if any begins Action Correct the JCL STORE WRONG ORGANIZATION Meaning Invalid file characteristics for STORE library RECSIZE must be greater than 78 If RECFORM is not V or VB RECSIZE must be less than 101 Result Processing stops Messages in the JOR indicate which units have been processed Action Check the library name specified in the STORE parameter reallocate a library of type BIN using the BUILD_LIBRARY command if relevant BAD INPUT ENCLOSURE ADD TYPE DATASSF Meaning The INPUT ENCLOSURE is not in SSF format Result Processing stops No unit is processed Action Include TYPE DATASSF in the JCL INPUT statement MISSING RECORD 101 FOR input _file efn input _member_ name or FOR INCLUDE include_file_efn include_member_name gt INCLUDE MEMBER IGNORED Meaning Include source is not in SSF format Result Processing of the current unit stops The processing of the next unit if any starts If the error occurs for the include source the include is ignored and processing continues Action The source can be converted from SARF to SSF format with the MAINTAIN LIBRARY command MOVE INCORRECT NAME IN RECORD 101 input_unit_name Meaning The name of the source read from the SSF source unit header record 101 is incorrect A name must be composed of letters digits hyphens and underscores The first character must be a let
520. pend mode e in the PRTLIB the listing of the procedure procname is stored in the member procname_L and replaces the one created by a previous compilation of procname Result Compiling stops The CU generation phase of the program being processed had already been performed Message PASOO indicates which CUs were already produced A partial listing of the program being processed may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center PAS16 GET INLIB FOR member name RC edited return code Meaning The compiler was unable to read a source record either from a user library or from the standard SYS IN library The reason for the incident is given by the return code Such an incident is very unusual and may indicate a system error Result Compiling stops Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center PAS17 OPENS CULIB WORK MEMBER member name RC edited return code Meaning The compiler was unable to create the member in the CU library to receive the CU being generated The return code indicates the reason for the incident Result Compiling stops The old version of the program being compiled is still available in the CU library because the compiler creates the new version of the CU in a temporary member and replaces the old vers
521. persists stop and restart the Trace collector Index out of bounds Index out of SRST range Specify a correct index to H_GISRST The status value to be set by the program is out of range Correct program value should be from 0 to 32767 The switch value to be set by the program is invalid Correct program value should be 0 or 1 for a single switch or between 1 and 32 for a set of switches Error in CLI wrong record opcode A value has been specified which is out of bounds Change the value Internal error e g Entry Point Table EPT index incorrect Internal interface error Contact the Service Center 52 33 Messages and Return Codes Directory VMM VCAM Internal Identification of Correspondent INDUNKN 1020 GAC and GAC TDS Cleanpoint EXTENDED Restart TDS Any TPR Operation UFAS EXTENDED INDVFBID 1702 INITERR 1880 188F INITVIOL 1443 INTERUPT 0006 INVCHAR 1c0D File Management System Disk OMH Main Console Management SBR Collector and Analyzer INVPECT 04c9 INVSTACK 04C8 52 34 The index does not correspond to an existent block or the PGBT does not exist Internal error Contact the Service Center No space in VCAM tables for definition of correspondent The number of possible connections is greater than maximum allowed specified at VCAM generation No more space in caller s simultaneity array Index unknown The sequence control block identifier is invalid or the loc
522. pplication is allocated there is no space available in the dimension concerned an attempt will be made to allocate space in the overflow zone This does not apply to allocations that must be made in their own dimension i e PMM areas and segments declared resident and relocatable If it is not possible to find space in a dimension for this type of allocation DIMOV occurs The number of steps in the dimension is greater than or equal to the current MPL The Multiprogramming level has been modified either by the system or by the operator One or several steps are waiting and will automatically restart Error in the directory of a queued file File damaged due to system error during updating 47 A2 10UJ DIRLIM 002D GCL Queued Files DIROV 1210 System Nucleus TDS UFAS and UFAS EXTENDED Disk Files DISABLED Buffer Management 0425 MCS DLGMNG DLGMNGA DLGMUD DLGMUN DLOGNG Mathematical 1A4B 1A4C 1A4D 1A4E 1A07 Package 47 A2 10UJ BUILD VMM Dynamic Addresser OPEN Resource Status SEND RECEIVE DATANAYV to IOFAIL Return Codes End of directory reached This is a warning which indicates that there are no more entries in the directory Terminate the scanning of the directory Directory limit reached with option name Directory overflow of a queued file Directory overflow on control structure managing virtual memory file PGBT direc
523. problem to Technical Support UNABLE TO CLOSE LOGFILE Action Correct the PRTFILE or report the problem to Technical Support UNABLE TO CORRECTLY RESET SORT RESOURCES Action Correct the PRTFILE or report the problem to Technical Support END OF FILE REACHED BEFORE LAST RECORD TO BE PROCESSED Meaning The HALT option indicated more records than there are in the file This is only a warning issued by the module XX OUTFILE IS EMPTY Meaning The user is advised that there is no output record This is only a warning issued by the module XX CHECK FOR RECORD TRUNCATION Meaning The user has defined the output record shorter than the input record This is only a warning issued by the module XX CHECK FOR RECORD PADDING Meaning The user has defined the output record longer than the input record This is only a warning issued by the module XX UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given UNABLE TO GET RECORD BLOCK FROM INPUT FILE Action Check file labels characteristics assignment If they are correct report the problem to Technical Support UNABLE TO CLOSE LOGFILE Action Report the problem to Technical Support 47 A2 10UJ TD18 03 TD19 01 TD19 02 TD19 03 TD19 04 TD19 05 TD22 01 TD22 02 TD22 03 TD22 04 TD22 05 47 A2 10UJ TD Messages UNABLE TO CLOSE LO
524. program or by specifying the value in a JCL statement DEFINE ifn COMPACTION NOT SUPPORTED FOR RECORD FORMAT F OR FB Meaning The data record compaction can not be used for records with format F or FB Result The file cannot be opened and an abnormal return code is set by the access method Action Contact the Service Center if necessary ifn ILLEGAL RECSIZE VALUE O OR NEGATIVE Meaning The specified RECSIZE is either negative or zero A zero value for RECSIZE may correspond to the following situation No RECSIZE parameter provided in the H_FD primitive of a user program written in GPL Result The file cannot be opened The abnormal return code RECSZERR is set by the access method Action This type of message is related to checking the consistency of file characteristics Remember that these characteristics are provided as follows e in the file label when the file already exists and the file label contains this information in this case the file label is incoherent e in the file description of the program or in a JCL statement DEFINE when either the file is to be allocated by the step execution or when the file already exists but the file label does not contain these characteristics DOS VS files in 41 3 Messages and Return Codes Directory sQ10 SQ11 SQ12 SQ13 41 4 IFN IFN IFN IFN this case a correct value must be provided either by modifying the program or
525. ps using this JAS receive the return code ABORTPG when journalization is attempted The JAS effectively terminates when all steps have aborted If the step is connected to the JAS without journalization you need only disconnect it from the JAS which will be obtained when it has deassigned all files protected by this JAS Action Terminate or disconnect the step Destination of the message JOR of all the steps using the JAS JP91 jasname STEP NOT REPEATED BECAUSE IT IS WORKING WITH A HA JAS NOTE This message applies only to GCOS 7 HA Meaning The system restarts and the steps can be repeated At GCOS READY the Complex Management ServiCe CMSC restarts the HA JAS either on the same member or on the other member of the complex TDS steps managed by CMSC automatically start on the correct member Users must restart other batch and IOF steps and TDSs not managed by CMSC after the used JAS restarts 47 A2 10UJ 24 9 Messages and Return Codes Directory Action None Destination of the message JOR of all concerned jobs JP93 jasname COMMAND TRANSFER WAITS FOR n DEVICE S devclass Meaning This message is sent to the administrator s JOR and console if he she is connected The MNJAS step is suspended until the necessary resources have been freed If the command was sent in IOF a break will stop the step wait and interrupt the command The JAS for which the TRANSFER command came is specified If the transfe
526. put library specified by the OUTLIB parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result This incident can only occur at the end of processing All output units have already been produced and may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC42 OPENS OUTLIB FOR output_unit name RC edited_ return_code Meaning MACPROC was unable to create a member in the output library specified by the OUTLIB parameter The return code indicates the reason Such an incident may be due to a system error Result Processing stops Messages in the JOR indicate which units have been processed The old output member of the current input unit if any and any output members which have been processed may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center 47 A2 10UJ 28 11 Messages and Return Codes Directory MAC43 PUT ON OUTLIB RC edited_return_code Meaning MACPROC was unable to write a record in the output library specified by the OUTLIB parameter The return code indicates the reason The return code DATALIM means that the library is full and cannot be extended Result Processing stops Messages in the JOR indicate which units have been processe
527. quest uses the ANY MEDIA option Result The step cannot be started due to a system error Action Contact the Service Center DV47 THE VOLUME volnm OF DEVCLASS dvc HAS BEEN MODIFIED Meaning The command refers to a non removable disk for which the name has been modified by a job that is still running Result The step cannot be started Action Wait until the media is deassigned and rerun the job or modify the command DV48 THE NON STANDARD VOLUME volnm OF DEVCLASS dvc HAS BEEN MODIFIED Meaning The command refers to a non standard non removable disk which has been modified probably set to standard by a job that is still running Result The step cannot be started Action Wait until the media is deassigned and rerun the job or modify the command DV49 A SEMAPHORE CANNOT BE GIVEN FOR ALLOCATION TO X1 Meaning Illegal allocation of a volume by a job Result The step cannot be started due to a system error Action Save the SYS LOGC and SYS SWLOG files domain DVMGT and contact the Service Center DV51 ANY MEDIA OPTION NOT ALLOWED FOR dvc Meaning The step requests an unknown volume MEDIA in JCL ASSIGN statement This function is not supported on cartridge devices connected to a library Result The step cannot be started Action Correct the JCL DEVCLASS or MEDIA parameters must be updated in the JCL ASSIGN statement 14 10 47 A2 10UJ DV Messages DV52 INCOMPLETE DEVI
528. r Service was already fulfilled before current request OPEN File Space Management Utilities Access Task Management Command Management Check Station Start Station Task Management Dynamic Addresser Requested space allocation not done since file already allocated Check that the correct file was processed even if the program ran successfully The specified catalog resides on a coupled volume and has already been locked by the same task Attempt to initiate an already initiated report Report Writer The descriptor has already been returned Check that the descriptor is really the one to be freed The output file already exists in the list of volumes The step termination depends on the presence of the CHECK parameter in the OUTALC parameter group If CHECK is not specified the file is altered and the command terminates with severity level 1 If CHECK is specified the file is left untouched and the command aborts with severity level 3 Pages already reorganized Contact the Service Center Asynchronous trap already set internal error Command name already used by the current process A request has been made to open a catalog which is already open Station exists and is in unattended mode An operator already exists for the station Already formatted Normal The task or process whose ABORT was requested H_ABTSK or H_ABTPCS internal primitive was already terminated The requested function has alrea
529. r WRITE IN AN ADDRESS SPACE WITHOUT BITMAP Meaning A before image of a block of the saved file exceeds the scope of the BITMAPSs of the server Internal error DSBAP ALL FILES DONE Meaning After an abnormal condition the server indicates in a file structure FDBVS that the file is no longer under dynamic save The abnormal condition is detailed by other messages XCBWAIT H_ERRID XCBWAIT H_ERRID Meaning Internal error ABNORMAL GET IN GIM XCBWAIT INDEX Return code Meaning Internal error GIM KEY LENGTH ERROR FORGET IMAGE Meaning Internal error VALIDATION OF CIS OUT OF SAVED SPACE Meaning Internal error ABNORMAL GIM DELETE IN FORGET_IMAGES Return code Meaning Internal error GIM KEY LENGTH ERROR VERIF Meaning Internal error GIM KEY ERROR VERIF Meaning Internal error GIM KEY LENGTH ERROR MODIFY_INDEX Meaning Internal error 12 11 Messages and Return Codes Directory DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 DU95 12 12 ABNORMAL GIM DELETE IN MODIFY_INDEX Return code Meaning Internal error XCBSAVE H_ERRID XCBSAVE H_ERRID Meaning Internal error ABNORMAL GIM INSERT IN MODIFY_INDEX Return code Meaning Internal error END OF WAIT PHASE REACHED Meaning Normal message the server is ready to save the current file It was waiting for this condition ABNORMAL CRFD Return code Meaning Internal error AB
530. r yy Produce a memory dump DUMP DATA at STEPOPT or STEP LEVEL and no H_ENDSRT execution in a subroutine sort caller then contact the Service Center An SBR task has aborted Refer to the Job Occurrence Report Internal errors in H_XUF_JREFCI H XUF CHNRCI or H_XUF_UVALCL Send a trace and log to the Service Center Abort the current running step A utility with a star expression in interactive mode has received a QUIT command from the user 47 A2 10UJ ABORTCU 04cc GAC Journalization TDS XCP2 Transaction or ORACLE ABORTPG 04c4 GCL Job Management Load Module TDS Loader Journalization OMH Terminal Management SBR Analyzer 47 A2 10UJ ABNCCAD to DATALOSS Return Codes Abort the Commitment Unit LONGWAIT TABOV DEADLOCK detected or internal error in GAC tables The current Commitment Unit is aborted Internal error during the journalization of a Commitment Unit Send the UFAS trace to the Service Center 1 The transaction aborts A transaction with its principal session is XCP2 and cannot be rolled back and restarted in the first commitment 2 A transaction declared with the HEURISTIC Commit in the generation of TDS cannot interface with the ORACLE database Refer to the TDS XCP2 Programmer s Manual Abort process group The process group has aborted due to an implementation or a system error Load Module references a Sharable Module with incorrect Segment Table Entry or two or
531. r a COBOL source program Action Change the TYPE of the source member using the LIBMAINT processor GPL40 PUT SYSOUT RC edited return code Meaning The compiler was unable to write a record in the standard SYSOUT when tracing the return code gives the reason Result Compiling stops Action Contact the Service Center GPL41 SEGSIZE IN DEBUG RC edited return code Meaning A system problem occurred during the compilation Result Compiling stops Action Contact the Service Center GPL42 TYPE OF INLIB SHOULD BE SL Meaning The library given as input to the compiler is not a source language library Result Compiling stops Action Check the JCL and correct it if relevant 20 12 47 A2 10UJ GPL Messages GPL43 TYPE OF CULIB SHOULD BE CU Meaning The library specified in the CULIB parameter is not a Compile Unit library Result Compiling stops Action Check the JCL and correct it if relevant GPL44 TYPE OF PRTLIB SHOULD BE SL Meaning The library specified in the PRTLIB parameter is not a source language library Result Compiling stops Action Check the JCL and correct it if relevant GPL45 PROCESSING OF proc name COMPILER GIVES UP IN phase name Meaning Information message displayed when a compilation is stopped This message indicates e the name of the program which was being processed procname e in which phase of compilation the processing was stopped phase name Another
532. r against the network configuration Refer to the VCAM error codes CONNECTION REJECTED STATUS PATHNAV VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning Path to destination not available Action Check the network generation parameter against the network configuration Refer to the VCAM error codes 47 A2 10UJ PT Messages PT22 CONNECTION REJECTED USER ALREADY LOGGED Meaning As in message text Action None PT23 CONNECTION REJECTED DUPLICATE STATION NAME Meaning As in message text Action None PT24 UNABLE TO CLOSE REMOTE APPL MSG GROUP VCAM ERROR CODES STATUS status REASON reason C_REASON c_reason Meaning System error on termination of message transmission Action Refer to the VCAM error codes PT25 CONNECTION REJECTED Meaning As in message text Action None PT26 PASS_THROUGH ABNORMALLY TERMINATED Meaning Abort on passthrough connection Action Try again If the problem persists contact the Service Center 33 2 Dialog With VCAM Messages PT31 To PT63 PT31 CHECK SEMAPHORE ERROR RC return code Meaning Software error Action Contact the Service Center PT32 UNEXPECTED VCAM EVENT Meaning User session has been interrupted Action None If the problem persists contact the Service Center 47 A2 10UJ 33 5 Messages and Return Codes Directory PT33 PT34 PT35 PT36 PT37 PT38 PT39 PT40 33 6 SESS TERMINATED B
533. r is done on dual copy of the secondaries n will have a value of 1 or 2 depending on the number of devices unavailable If not n will equal 1 The devclass of the device to be freed is given Action Ensure that an operator releases the necessary resources 24 10 47 A2 10UJ 25 LD Messages General Environment LD messages are produced by the loader component of the system which loads the modules into the backing store before execution Pertinent Manuals ICL Reference Manual ienesis er IE ER E ER 47 A2 IIUJ JCLUsers Guide reves nonii rn a a N a See eee A 47 A2 12UJ RETURN CODE FOUND DURING PROCESSING RC edited return code Meaning An abnormal situation was encountered when the load module was loaded the message usually indicates a system error Result The step is aborted Action Contact the Service Center ERRONEOUS ENTRY SEGMENT STE RC edited return code Meaning An illegal segment number was specified for the entry segment of the shared module at shared module creation Result Loading is aborted Action Contact the Service Center LOAD MODULE PRIOR TO 1C RELEASE COMPATIBILITY MAY NOT BE ENSURED Meaning Load Module belongs to a previous release Result Loading proceeds Action Relink the Load Module 25 1 Messages and Return Codes Directory LDO4 LD10 LD30 LD31 LD40 LD41 25 2 POTENTIAL INCOMPATIBILITY WITH FUTURE H
534. ram that attempts to open a file describes this file with fixed attributes different from those of the assigned file The fixed attributes of the assigned file are those given in the program that created it Result Execution aborts Action Correct the file description or the file assignment SPM message Meaning Some unexpected event has occurred for the COBOL compiler and several system components during memory management Action Correct the cause of the error or contact the Service Center 4 7 Messages and Return Codes Directory 47 A2 10UJ 5 CG Messages General Environment CG messages are produced by the catalog specific access method Pertinent Manuals GCOS 7 Guide to SCCUrItV cccccccccccsecsecneesse este c setae euseseseenneeeneeenseenas 47 A2 17UG Catalog Management User s Guide c cccccccccccccsssecsseesteenseeteceeeseeseesaes 47 A2 35UF Message Descriptions cG01 WARNING SITE CATALOG ALMOST FULL or RESIDENT cG01 CATALOG catalog name ON IS ALMOST FULL MEDIA volume name Meaning This message may appear during an operation that stores information in the catalog e g CATALOG CATMODIF Result Execution proceeds Action Extend the catalog if required using the CATEXTD utility cG02 ron SITE CATALOG OVERFLOW or RESIDENT cG02 CATALOG catalog name ON IS FULL MEDIA volume name Meaning This message may appear during an operation t
535. rchased or not CMA INITIALISATION FAILED RC XXXXXXXX Meaning CMA cannot be initialized Action Ensure that the SM H_SM_CMA is loaded in BKST If it is check JOBLIB statement of TDS job TCP IP COMMUNICATION IS NOT INITIALIZED ERRNO XXXXX ON XXXXXXXXXXXXX Meaning An error occured during TDS TCP IP initialization ERRNO XXXXX is the error code returned by the invoked Sockg7 function see TDS TCP IP User s Guide XXXXXXXXXXXXX is the name of the invoked Sockg7 function which encountered a problem 47 A2 10UJ MU and MV Messages Action Check lt lt hosts gt gt and lt lt services gt gt configuration files used for the chosen TCP IP way of communication Check OPEN 7 and sockg7 products are active and ready on the site Mv80 TCP IP FUNCTION IS NOT AVAILABLE Meaning The product TDS TCP IP Marketing Identifier has not been purchased for the site see 7DS TCP IP User s Guide The H_SM_DCM SM of SYS DCM SYSTEM is not loaded Action Verify if the product was purchased or not Ensure that the SM containing H_SM_DCM 1s loaded TDS TP7 RECOVERY RC return code This is a warning message This message appears in the JOR during the recovery phase at end of job restartable abort or after a crash An abnormal return code indicates that some problem has occurred during the recovery phase Refer to messages in Before and After Journals 47 A2 10UJ 29 33 Messages and Return Codes Dir
536. rd is accessed through a secondary record A complementary record is accessed through a secondary record A modification to a control interval has been made in deferred update mode The item is a resource item Function key A CI has been updated SITE QUOTA file not accessible Space not accounted by Quota Control volume is not a quota controlled volume A check is mandatory here Something has been cancelled Cancel an event within event manager The IO was cancelled No record found End of logical module printer Multiplexing is requested Request taken in account Something else has the same name Generation not yet created 47 A2 10UJ 47 A2 10UJ 00E3 00E4 00E6 00E7 00E8 00E9 0100 7FFF 0110 0114 0115 0120 0200 0201 0202 0203 0204 0205 0206 0300 0301 037F 0380 03FF 0400 0410 0410 0420 0411 0412 0413 0420 0425 0430 0435 0436 0437 0440 0450 FVLIM FILEMARK JOBCMD KEYHIGH PSIEXS SPLIT ABNORMAL NOTDONE NORUN NOTALL DAMAGED BUSY ISDBUSY ILLBAERR BLKBUSY KEYCHG OUTSEQ SHUTDOWN UNDRFLOW AUPI DSAC TOOLATE DUPNAME DUPENTY DUPKEY DUPUSER DUPSTTN DUPREL DISABLED NODETAIL DATAGAIN DATALOSS RECNFD WRONGITM WRONGSTA Return Codes Listed in Numerical Order The entire list of volumes containing the file has been communicated to the user File mark recognized A job command is detected Record selected has next hig
537. re Detail The FORCE option is not allowed for tape files when the processing mode is not INPUT An invalid ifn has been specified The last volume of a multi volume file has been reached but the end of data indicator is not present in the label The specified file is not open The current volume cannot be found The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code CONFLICT The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code DATALIM The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code EXHAUST The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code FUNCNAV The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code LEVVIOL The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code NOCURREC The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code NOTOPEN The DFPRE 19 messages pertain to the particular access method being used For further information see Return Code WRONGPMD Space has already been allocated for the file 57 15 Messages and Return Codes Directory DFPRE 20 ARGERR DFPRE 20 ARVIOL DFPRE 2
538. requested will not be performed Action Either alter the value of SHARE or make the file a controlled file 47 A2 10UJ 18 2 GACO1 GACO3 GACO4 GACOS5 GACO6 GAC Messages Gac Extended Message Descriptions ifn MAXLOCKCOUNT n1 ifn CONFLICT CNT n2 DEADLOCK CNT n3 Meaning Information message indicating for the specified file IFN IFN e the number of locks taken for the file n1 e the number of conflicts of access detected while accessing a CI of the file n2 e the number of deadlock situations detected while accessing a CI of the file n3 Result Too high a value for the counters n2 and n3 may indicate an inadequate organization of the data base The message is printed each time a monitored file is deassigned IFN ifn SHARE MONITOR ONL WITH UFAS DISK FILE Meaning Assigning the value MONITOR to the SHARE parameter of a file indicates that the sharing of the file is to be controlled by GAC EXTENDED GAC EXTENDED may only be specified for UFAS and IDS II files Result The operation you requested is not performed Action Check the file organization IFN ifn REPEAT OPTION MISSING Meaning For Batch steps to be able to lock files using GAC EXTENDED the REPEAT option must be specified This has not been done Result GAC EXTENDED will not restart after a deadlock Action Specify the REPEAT option IFN ifn MONITORED FILE IN TDS MUST BE CONTROLLED Meaning A file which
539. rgerr 15 SSYSTR incorrect use of option W argerr 17 SSYSTR incorrect option value argerr 18 SSYSTR incorrect BUFFER parameter use argerr 19 TSYSTR incorrect argument set argerr 20 TSYSTR incorrect use of option argerr 21 TSYSTR incorrect argument set argerr 23 TSYSTR incorrect option argument argerr 24 procedure execution error argerr 25 incorrect trace class name argerr 26 incorrect trace class state argerr 30 MSYSTR incorrect string length argerr 31 MSYSTR incorrect string offset values argerr 32 MSYSTR incorrect string offset values argerr 33 trace domain name is not star convention Action For argerr 24 contact the Service Center For the other errors retype the command with the correct arguments TR60 time cmd_name COMMAND REJECTED EMPTY OBJECT SELECTION Meaning There is no TRace object corresponding to command argument Action Check the domain buffer name TR60 time cmd_name COMMAND REJECTED Meaning Incorrect command execution depending on er_nbr TBL NE error 1 abnormal h_getcmd error 5 start stop collector not done the return code may be trc 8 notdone gt no active collector tre 8 noinit gt GCOS session without tre jobm 52 tabov gt collector already started error 27 incorrect XRON argument retcode is nomatch error 37 procedure execution error retcode is typerrr error 38 procedure execution error retcode is h_chkstar abnormal 47 A2 10UJ retcode 44 15 Messages and
540. rimitive in GPL before opening the file Both facilities cannot be used at the same time because a deadlock situation could arise Result The locking of the file is not performed The abnormal return code INVUSE is set FP52 ifn WRITE ON 18 TRACK CARTRIDGE NOT ALLOWED ON 36 TRACK DEVICE Meaning The opening of an 18 track cartridge mounted on a 36 track device is refused to prevent unintended overwriting of any existing files To use this cartridge on a 36 track device a PREPARE TAPE is mandatory Result The file cannot be opened and the abnormal return code WRVIOL is set FP53 ifn VALID OR CATALOGED FILE S MAY BE PRESENT ON 36 TRACK DEVICE OUTPUT VOLUME Meaning The opening of files on this cartridge is refused to prevent unintended overwriting of any existing files To use this cartridge a PREPARE TAPE is mandatory Result The file cannot be opened and the abnormal return code TYPERR is set FP60 MOUNT MEDIA volnm ON A DEVICE SUPPORTING IDRC Meaning The processing of the file needs hardware compaction but the current drive does not provide it Action Remove media and mount it on a device that supports IDRC Type M Destination Specific 17 10 47 A2 10UJ 18 GAC Messages General Environment GAC messages are produced by the Generalized Access Control component of the system The first set of messages are output by GAC when the GCOS 7 operating system is at Release V3A0 V3B0 The second set o
541. ring control violation Sharing control violation Correct JCL or program Depends on environment 47 A2 10UJ System Nucleus VMM TDS SHLVVIOL 1462 GAC and GAC OPEN EXTENDED TDS GAC and GAC Commitment Unit EXTENDED Management IDSAI Access Job Management Introduction of Jobs UFAS and UFAS OPEN EXTENDED SHRERR 1836 SHRVIOL 1460 146F RESNAV to YETALLOC Return Codes There is an inconsistency in the arguments provided PRIVATE and SHARE are not 2 or 3 Attempt to assign a TDS controlled file with an illegal share parameter Modify the share attribute in the catalog or ASSIGN JCL statement The share value must be MONITOR ONEWRITE or NORMAL for a TDS controlled file Sharing level violation SHARE MONITOR not specified for a controlled file SHARE MONITOR specified when GAC not available Conflict during an OPEN END SYSTEM is active The job cannot be created Sharing rules violation Check for concurrent OPENs Use SHARE NORMAL and ACCESS SPREAD or WRITE if possible Invalid value for share parameter Sharing violations SHUTDOWN 0206 Request not performed due to shutdown RBF Station Management Site Management Job Management Introduction of Jobs Network Generation TDS XCP2 SKIPPED 0OO0O0F 47 A2 10UJ Shutdown of station requested but some deliveries for the station remain to be output Attempt to assign a remote device on a site for which shut
542. rketing Representative for product or service availability 47 A2 10UJ Rev11 Scope and Objectives Intended Readers Prerequisites Structure 47 A2 10UJ Preface This manual describes in detail the system error messages and their associated return codes that are produced whenever an abnormality occurs in processing and that are printed in the Job Occurrence Report All the messages and return codes in this manual can appear in the Job Occurrence Report and or on the IOF terminal submitting the job Messages that appear only on the main operator s system console are described in the GCOS 7 Console Messages Directory This manual is for users of DPS 7000 systems with the GCOS 7 operating system Release V8 None Section 1 Section 2 Sections 3 to 47 Section 48 Section 49 Section 50 briefly describes the Job Occurrence Report JOR tells you how to interpret error messages It gives you the general format of error messages It lists the two or three letter message class code that precedes each error message thus allowing you to identify which system component was being used when the error occurred explain error messages and their association with the return codes listed from Section 49 onwards tells you about system and file violation messages describes the trace messages for IDS II under TDS tells you how to interpret return codes It gives you the general format of return co
543. rlocked Error in modification request A change to a system load module requires a modification to the Process Exception Class Table which is not authorized A new interface has caused a system error Contact the Service Center Erroneous modification of Channel Program 1 The type of the segment that requires the creation of a new Page Table segment is incorrect 2 Attempt to lock a segment not in the buffer Contact the Service Center mode violation Mode violation The requested operation does not match the modes specified when the session was opened Mounting request error MOUNT ALL option should be specified for this PMD 10 1 A UP Volume mounting error Mount all the volumes Message error Error in the reply to a console message Send the PRLOG log to the Service Center Message error The message passed to the H_RWCHECK primitive for analysis of the E S termination does not correspond to that which was posted on the user s explicit semaphore 53 11 Messages and Return Codes Directory MSGOV MTCHVIOL MULTPLX NAMEERR NASSIGND NAVAIL NCOMPREC 53 12 1205 FORMS Job Management MCS 1406 Network Generation System Nucleus Internal OODF 1870 187F GCL 0900 093F 0A00 OAFF 170B SEND Start Resume or Terminate Job SEND Automatic Resource Manager Dynamic Addressing VMM Message number overflow Expansion area overflow Con
544. robe setting failed Contact the Service Center The receiving segment has been specified incorrectly Contact the Service Center Record does not agree with previous specification COBOL Status Key value 95 OPEN Catalog Management CATLIST COBOL RTP OPEN Statement Size of physical record not equal to value declared in program Situation not detected when file read from input enclosure An unstable record has been encountered by the catalog access method Run CATCHECK utility An OPEN statement with the OUTPUT option is executed on a file whose maximum record size in the program is different from the one declared when the file was created 53 35 Messages and Return Codes Directory RECFERR RECNFD 53 36 UFAS EXTENDED 1860 BFAS Sequential OPEN Disk Files File Management System Disk SBR Analyzer Unit Record Driver OPEN Diskette 0437 Label record not found Contact the Service Center with the file label dump Record format error Illegal record format not supported Keyed records records with track overflow spanned records or records whose format is not V or VB cannot have compacted data Record format is not F FB V VB FS or FBS The input file is not an SBR file This may be due to the wrong file having been specified truncated records or the wrong record size Check the input file Record format is not F FB standard processor or F U foreign processor
545. rocessed This incident can only occur at the end of the processing of the current unit All stored prototypes may be accessible Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center MAC58 CLOSE RETRIEVE n retrieve_file_efn RC edited_return_code Meaning MACPROC was unable to close the file specified by the RETRIEVE parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result Processing stops Messages in the JOR indicate which units have been processed This incident can only occur at the end of the processing of the current unit Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center 47 A2 10UJ 28 15 Messages and Return Codes Directory MAC HR_DN_ELINE nn WORKING ON input _file efn input _member name file ifn or MAC HR_DN_ELINE nn WORKING ON INCLUDE include_file_efn nn FPWoOoON OO UPRPWDN PB NNNNNNNPBPHBPRPHP PB AuURWNPOWUDIHDUARWNHO include _member name file ifn SOURCE IS input _file efn input_member_ name Meaning This message reports errors detected while accessing or reading input or include source units These problems are usually due to e Errors in the parameters of the MAC or MACPROC JCL statement e Incorrect source units bad SSF control
546. rol System MLA Multiline Attachment MLOG Message Log MNJAS alias for MAINTAIN JOURNAL After Switchable MPL Multi programming Level part of Job Scheduling MSC Mass Storage Controller OMH Operator Message Handler OU Output Job State as shown in response to a DS command OWQ Output Writer Queue 47 A2 10UJ 47 A2 10UJ Interpreting Return Codes PCB Process Control Block PCF Program Checkout Facility PCS PXU Control Store PECT Process Exception Class Table PIO Physical Input Output PLM Preinitialize Load Module PMD Power Module for SCI Drive PMM Preload Main Memory RBF Remote Batch Facility RDW Record Description Word RMS Remote Maintenance Software or Service RTP Run Time Package RWI Read Write Interface SARF Standard Access Record Format SBR System Behavior Reporter SD Segment Descriptor SDPI Standard Device Programmatic Interface SICID System Internal Component Identification SIU Software Integration Unit SRB Semaphore Request Block or Software Release Bulletin SRST System Resource and Status Table SSF System Standard Format STN Segment Table Number used in CPU internal management or Station SWI Switch access from JCL GCL executing programs SYS System TDS Transaction Driven Subsystem TERMJ Terminate Job TNS Transport and Network Subsystem TPR Transaction Processing Routine TTW Terminate Terminal Writer TW Terminal Writer UFAS Unified File Access System URCINIT Unit Re
547. ror Messages If the system detects a malfunction when a job executes an error message is written in the JOR Job Occurrence Report A user error or a system error may cause a malfunction Some messages are also displayed on the IOF terminal when an error occurs during the execution of an interactive step Error messages begin with a two or three letter code If you cannot find a message in this manual and the message is not self explanatory look for the code in the following table The code corresponds to the system component used when the error occurred Then refer to the appropriate user s manual If no manual exists or if the cause and or meaning of the error message are still unclear inform the Service Center The sections that follow one type of error message for each section give you information to determine why the error occurred and suggestions and examples of how you might resolve the error condition The general form of a message is message text where 11 is a two or three letter classification code and mn is the number of the message within its class The text after the code explains the cause of the error or gives a further numerical classification followed by a return code specification The second part of this manual explains the return codes An error message may have no qualification or it may be a WARNING message a FATAL message or a SYSTEM message WARNING and FATAL messages usually refer to errors made by u
548. rrect the JCL GCL DSL source program Contact the Service Center if a system processor calling SORT is used 2 TRID4 The preallocated SORT work file block size is too big for a sort memory size which is too short Increase the SORT memory or preallocate the sort work file again with the BLKSIZE and or CISIZE 4096 bytes Size of variable length record exceeds specified maximum value 1 A segment requires a new Page Table segment to be created but the page numbering is incorrect 2 An incorrect length has been specified Record size error must be given a value from 1 to 263 Incorrect length for variable length record Physical record length greater than RECSIZE value specified or otherwise invalid ALN negative in move mode or ALN greater than block size Invalid sector size foreign processor 53 7 Messages and Return Codes Directory Unit Record Driver WRITE Printer OPEN LOCKERR 183A RWI LOKVIOL 1466 GAC and GAC OPEN CLOSE EXTENDED DEASSIGN GAC TDS LONGWAIT 0018 GAC LQVIOL 1446 File management File Storage and Tape Handling LTYPERR 1826 UFAS EXTENDED 53 8 1 Negative ALN not allowed in move mode 2 ALN smaller than header length 3 ALN greater than RECSIZE or previous expected length Margin greater than or equal to requested number of hammers Error in lock count value Incorrect volume lock counter value see inter system share primitives Note that when
549. rror code the extraction may be incomplete 400B 28 h_open abnormal System trace circular file open error the return code extraction may be incomplete 400B 29 h_putx incorrect System trace circular file first record rewrite return code error the extraction may be incomplete 400B 30 h_open abnormal Extraction output file open error the extraction return code may be incomplete 400B 31 datalim Output file is full before extraction termination 400B 32 h_open abnormal Extraction second output file open error the return code extraction may be incomplete 400B 33 h_put incorrect return Extraction output file put error code 400B 34 h_close abnormal Extraction output file close error the extraction return code may be incomplete 400B 35 OBJTPERR Incorrect record structure detected in system trace circular file to be extracted 44 2 2 SICID 400F Messages TBL NE Error number Return code Meaning Action 47 A2 10UJ 44 13 Messages and Return Codes Directory TR41 44 3 TR60 TR60 TR60 TR60 TR60 44 14 400F 1 h_close RC Extraction current outfile close error during h_trcextr exit routine execution 400F 2 h get RC Incorrect read of system trace circular file first record during h_trcextr exit routine execution 400F 3 h_putx RC Incorrect rewrite of system trace circular file first record during h_trcextr exit routine execution 400F 4 h_close RC Incorrect system trace circular file
550. rs in the pool is too small DELETE START The WRITE DEFERRED buffers plus the BUSY buffers exceed the maximum number of buffers Increase the number of buffers and SIZE POOLSIZE or decrease the number of simultaneously active transactions TDS Abnormal termination of the channel program of Set Function Mask the device is reserved Check device accessibility 1 It is impossible to attach the specified catalog because it is already attached Try again later 2 An automatically attached catalog is not available Try again later 3 The specified catalog resides on a coupled volume It is shared by two coupled systems and is currently locked by the other system Check the state of this other system If it is not running enter the MV CLEAR command on the main console 4 It is impossible to delete the specified catalog at present Try again later The file sharing parameters are not compatible with those of other users The VTOC is locked by another system When sending a step there are no more resources available in the journal tables Conflict over the allocation of a resource as a buffer is still active in the sequence control block A resource which is needed to execute the function is presently busy and cannot be accessed In IOF mode wait for a while and re execute the command 1 Remote site is busy with another server stop the other server with the TTSVR command then issue the previous command again
551. rting Further records will be read if so specified in the program Restart the SORT step with the keyword DEBUG in the FUNCTION paragraph for the SORT command or with DEBUG 1 in the step option string of COBOL subroutine SORT or with the equivalent SRTDEF modification for GPL caller plus DUMP DATA in JCL File limit reached COBOL Status Key value 10 for READ 34 if open library file in output mode Any File READ Organization WRITE COBOL RTP READ 47 A2 10UJ End of file reached or file declared as dummy at assignment No action required End of file reached No record written No action required End of data reached on a multi logical unit file The AT END clause of the COBOL READ statement is activated 51 33 Messages and Return Codes Directory DMU VOLLIST FILLIST Dump Analyzer File Management Save and Restore FORMS GAC EXTENDED OMH System Nucleus VMM System Nucleus Dynamic Addresser VMM TDS Unit Record Driver GET Diskette NOTE A tape mark has been encountered End of descriptor data reached The user should return to the beginning of the file Normal return code End of file reached The end of file has been reached or there is no more space in the library Modify the size of the file or the library The GAC save area is too small Error in TDS UFAS interface No more mailboxes Internal error End of virtual memory file reached linked access
552. rvice TBL NI 21 Use of TDS 22 Routing of outputs 23 Station site mapping 47 A2 10UJ 48 3 Messages and Return Codes Directory 48 4 47 A2 10UJ 49 Trace Messages for IDS II under TDS Environment These messages are sent by IDS II when the TRACE command is used Pertinent Manuals IDS IT Reference MAnudl c ccccccccccccecsceecesseese cece eeeeseestecaeecaeecseeesaeseenaeees 47 A2 11UD Message Descriptions The format of the trace message when IDS II is used under TDS is PGID lt tprname gt SLN lt internal line no gt ERR lt error no gt lt text gt WNG where TBL NI lt tprname gt is a 30 character string containing the program identification as specified in the PROGRAM ID clause If this information is not available or is irrelevant it is replaced by asterisks lt internal line no gt js a 7 digit decimal number identifying the source internal line number where the statement involved is coded If this information is not available or is irrelevant it is replaced by 0 ERR WNG indicate a fatal error or a warning respectively lt error no gt is a 4 digit decimal number The meaning of each error number is described in the table below lt text gt describes the error These texts are as explicit as possible Error Numbers and Their Descriptions 47 A2 10UJ 49 1 Messages and Return Codes Directory TBL NE Error Numb
553. s Index and primary file have different update dates Load Module Loader Step Initiation Loader VMM ARG too near to N PI from below ARG too near to N PI from above ARG gt 10 8 loss of precision ARG gt 175 36 overflow cosh Security violation Error in segment descriptor There is an error in one of the segment descriptors of the load module Link the load module again with the correct options regarding segments CLI sequencing error Internal system error Contact the Service Center Invalid segment name segment number the segment corresponding to this name does not exist or is not the expected type Contact the Service Center No seek command in a disk channel program Not in proper sort sequence COBOL Status Key value 30 CATMODIF CATDELET File Storage and Tape Handling Step Initiation SYS CATALOG must be modified after SITE CATALOG or deleted before SITE CATALOG The flow of control attempts to go beyond the end of the program Wrong SSEQN Volume Sequence Number sequence during file deallocation The current device is not in forms mode Check if it supports forms mode CLI sequencing error 54 7 Messages and Return Codes Directory SESREJCT SEXPOV SEXPUN SFACNG SFACOV SFNBOV SFNUNKN 54 8 Journalization RBF GET L6 TDS XCP2 UFAS BFAS Tape READ VCAM ISO 1711 1A01 Mathematical Package 1A5D Mathematical Package 1A36 1435 1214 TDS A
554. s It identifies the type of violation refer to the list below 48 1 Messages and Return Codes Directory 48 1 48 2 Object Codes Oo TBL NI 00 root 01 directory 02 file 03 file link 04 volume 05 catalog 06 user 07 project 08 billing 09 application 10 station 11 password 12 relation user project 13 relation project billing 14 relation project station 15 relation project application 16 transaction 17 site 18 main operator right 47 A2 10UJ System and File Violation Messages 48 2 Violation Classes Cc 48 2 1 Violation Classes 01 to 07 Violation of Access to Cataloged Objects TBL NI 01 simple access violation rights LIST EXECUTE READ WRITE RECOVERY 02 owner right violation 03 illegal setting of access right 04 illegal deletion of access right 05 violation of SYSADMIN right 06 access to a protected object when the checking of access to the system is not performed 07 volume access violation 48 2 2 Violation Classes 11 to 13 Violation of Access to the System TBL NI 11 Batch access violation 12 Telecom access violation 13 Operator s logon cannot be checked because a system failure has been encountered during this checking The logon is accepted in order to let the operation continue otherwise the system would be deadlocked Example I O error in accessing the catalog 48 2 3 Violation Classes 21 to 23 Attempt to Use a Protected Se
555. s Directory 55 4 0050 005C 0050 0051 0052 0053 0054 0055 0056 0057 0058 0059 005A 005B 005C 0080 009F 0081 0082 0083 00A0 00A1 00AA 00B4 00B5 00B6 00B7 00B8 OOBE OOBF 00C1 00C2 00C4 00C8 00D2 00DB 00D3 00D4 00DC 00DE 00DF 00E0 00E1 00E2 H200CNL H200CNLO H200CNLI1 H200CNL2 H200CNL3 H200CNL4 H200CNL5 H200CNL6 H200CNL7 H200CNL8 H200CNL9 H200CNLA H200CNLB H200CNLC NEMPTY STILLMSG STILLPG STILLTER EMPTY TEMPLIM OBSOLETE NODE UFASPATH COMPREC SYNCOMP WDMOD RESOURCE FUNCKEY UPDCI QFNACCES SPNACNT CHECK CANCEL CANEVT CANIO NORECFND ENDLOGMD MULTPLX NOTED SYNONYM GENEMPTY Last crossed channel number with form limit crossing over No VFU with FORMLIM Channel number with FORMLIM Channel number 2 with FORMLIM Channel number 3 with FORMLIM Channel number 4 with FORMLIM Channel number 5 with FORMLIM Channel number 6 with FORMLIM Channel number 7 with FORMLIM Channel number 8 with FORMLIM Channel number 9 with FORMLIM Channel number 10 with FORMLIM Channel number 11 with FORMLIM Channel number 12 with FORMLIM Table entry or queue is not empty Message s still pending Process group s still pending Terminals still pending Table entry or queue is empty Temporary limit of file has been reached Too late to give previously valid action The item is a node item The item belongs to UFAS path A complementary reco
556. s Directory TDO2 09 TDO2 10 TDO2 11 TDO2 12 TDO2 13 TDO2 14 TDO2 15 TDO2 16 TD02 17 TDO2 18 42 8 NUMERIC VALUE OUT OF BINARY WORD VALUE LIMITS Action The option string or DSL Data Services Language must be corrected Each error is underlined by a LITERAL gt 256 INTERNAL CHARACTERS Action The option string or DSL Data Services Language must be corrected Each error is underlined by a ZERO LENGTH LITERAL Action The option string or DSL Data Services Language must be corrected Each error is underlined by a INVALID LENGTH FOR COLLATE SEQUENCE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a gt 1024 CHARACTERS FOR RECORD PARAGRAPH LITERALS Action The option string or DSL Data Services Language must be corrected Each error is underlined by a ODD LENGTH FOR HEXADECIMAL LITERAL Action The option string or DSL Data Services Language must be corrected Each error is underlined by a INVALID OR UNEXPECTED LITERAL Action The option string or DSL Data Services Language must be corrected Each error is underlined by a MULTIPLE USE OF KEYWORD Action The option string or DSL Data Services Language must be corrected Each error is underlined by a UNEXPECTED END OF OPTION STRING LITERAL Action The option string or DSL Data Services Language must be corrected Each error i
557. s and Return Codes Directory 10 1 10 4 10 9 12 0 12 1 12 2 12 3 14 1 16 4 ILLEGAL OVERLAP IN TRANSLATE INSTRUCTION Appears when the string to be translated overlaps on the translation table FLOATING POINT INSTRUCTIONS NOT ALLOWED Appears when an attempt is made to run a FORTRAN program where the scientific instruction set feature has not been selected OUTWARD CALL Attempt to activate a procedure that would execute in a less privileged ring than the current procedure e g a ring 2 procedure calls a ring 3 procedure ILLEGAL GATE SEGMENT Attempt to activate a more privileged procedure which is not gated READ VIOLATION Attempt to access data from a procedure that executes in a ring greater than the read ring associated with the segment which contains the data WRITE VIOLATION Attempt to write data in a segment whose write ring is less than the ring of the executing procedure or there has been an attempt to write to a segment that cannot be written EXECUTE RIGHT VIOLATION 1 Branch operation inside a segment with a current ring outside the scope WR MAXR 2 Branch operation inside a segment which is not executable This exception may appear when a procedure contains several segments with different values for WR and MAXR rings GATE PROCEDURE CALL RIGHT VIOLATION Activation by a procedure of a more privileged procedure the execute ring of the calling procedure being greater
558. s assigned dynamically and the VOLIDE segment was not specified Incorrect label type A value specified for a work volume is greater than the value specified for the total number of volumes Incorrect value specified for ABNSTEPEND Incorrect value specified for NORSTEPEND Incorrect value specified for MASK The value specified for CATRANK is greater than 5 The parameters NBEFN ANYMED or ANYEFN have been specified for the assign and FILSTAT is not UNCAT NBEFN or ANYEEN has been specified for a device which is not tape NBEFN or ANYEFN has been specified with CATNOW CATNOW has been specified for a device which is not tape or disk ANYMED has been specified with CATNOW when a resident file is being assigned NBEFN or ANYEFN has been specified when FILSTAT is not UNCAT and a resident file is being assigned ANYMED has been specified when FILSTAT is not UNCAT and a resident file is being assigned ANYMED has been specified when FILSTAT is not UNCAT and the device is not tape The ifn specified to be used in input mode has already been assigned and is now in the open or close state but has not yet been deassigned 57 7 Messages and Return Codes Directory DFASG 19 CONFLICT Set in the following cases An incorrect input parameter has been specified for a dynamic define An ifn has been specified for a dynamic define and the corresponding efn is already open DFASG 19 NOWAIT An ifn h
559. s been sent Violation in the use of the SEND verb Invalid parameter value has been defined for the sort Errors in the SORT parameters sort commands in the input file DUMMY INPUT or OUTPUT FILE subroutine sort parameter values Correct the JCL GCL DSL source program Refer to the error messages in SORT REPORT or in the Job Occurrence Report if SORT is a subroutine A system processing error has occurred during the sort The step is aborted A sort processing error has occurred If it is not traceable to a user error consult the Service Center The step is aborted File space limit has been reached No more labels can be recorded in the VTOC of this volume Allocate No more space available 54 13 Messages and Return Codes Directory SPACENAV SPACEOV 54 14 Queued Files EXTQUD UFAS EXTENDED OAOF Any File OPEN Organization Catalog Management CATBUILD CATEXTD COBOL SORT UtilitySORT File Management File Space Management Utilities Journalization MCS 1201 FORMS IOF OMH Physical I O Access Internal File Storage and Tape Handling Save and Restore SEND EPBH Commands Initialize Process Group I O Maximum size already allocated The space allocated is greater than the space available Send a description of the file to the Service Center Space not available Not enough space on specified volume to perform requested allocation ALLOCATE The
560. s been specified Set in the following cases The volume to be opened cannot be found in the media list specified for the assign In the case of a cataloged tape file the volume sequence number is greater than 250 The NEXT option is restricted to diskette files or tape files in INPUT mode The current media tenth cannot be retrieved by the catalog For diskette files the sequence of the media list is invalid For diskette files blank volume sequence numbers are mixed with non blank volume sequence numbers The specified media has been declared not available by the operator No volume has been previously closed The specified ifn is not open Inconsistency in Data Management Structures A file description has been successfully retrieved for a dummy ifn Set in the following cases The input structure specified for H_DFLDEF is incorrect No label can be transferred the function is not defined for this device An invalid ifn has been specified The specified ifn is not open 57 19 Messages and Return Codes Directory DFPRE 25 ADDROUT The input address does not match with the space address of the file DFPRE 25 ADFTERR The format of the parameter address is invalid the file organization does not support physical record number addresses DFPRE 25 CPYNAV Set in the following cases The copy number is invalid The extent description corresponding to the input dual copy number is not availa
561. s exclusive with LATEST NOUPD APPEND Verify extractor job execution arguments Records time stamp are not monotonous in system trace circular file to be extracted this may be due to incorrect isl time values No action is required Incorrect records sequence number in the partially written system trace circular file to be extracted The complete sequential copy of the file is done Incorrect records sequence number in system trace circular file to be extracted The complete sequential copy of the file is done Records time stamp are not monotonous in system trace circular file to be extracted this may be due to incorrect isl time values No action is required Extraction input system trace circular file structure is not correct Verify file identification if valid clear file to continue Extraction input system trace circular file contains incorrect records Verify file identification if valid clear file Extraction input system trace circular file contains incorrect records Verify file identification if valid clear file Extraction input system trace circular file structure is not correct Verify file identification if valid clear file Extraction input system trace circular file structure is not correct Verify file identification if valid clear file Extraction input system trace circular file structure is not correct Verify file identification if valid clear file Extraction input system trace circular
562. s for the files which are used with the After Journal 47 A2 10UJ 29 21 Messages and Return Codes Directory MU96 MU97 MU98 MU99 MV00 29 22 Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master UNSUCCESSFUL RELEASE OF MEMORY Action None internal error which does not prevent TDS from executing Type of message Warning Dump taken Yes Recipient of the message TDS Master UNSUCCESSFUL REQUEST OF MEMORY Action None internal error which does not prevent TDS from executing Type of message Warning Dump taken Yes Recipient of the message TDS Master TDS SIMULTANEITY SYNCHRONIZATION ERROR Action None internal error which does not prevent TDS from executing Type of message Warning Dump taken Yes Recipient of the message TDS Master ERROR IN ADMINISTRATION OF TDS HA Meaning Internal protocol error in the HA context For example the TDS was declared WATCHED BY CMSC but was not started by CMSC Action If the cause cannot be identified contact your service center UNABLE TO ACCESS SECURITY PROCEDURES Meaning On a site declared with the SECUR ACCESS option the SM containing the SECUR ACCESS TPR is not present or the library containing the SM is not specified properly in the JOBLIB statement Action Ensure that the SM containing the SECUR ACCESS TPR is present otherwise ensure that the library contain
563. s in the JOR that fully identify the step and give the result of the step s execution Each time an external event influences the execution of a job the operator intervenes for example there is a message in the JOR to record this event e records any abnormal situations by producing a warning or an error message Sometimes there is a return code within the message Each message has a code that allows you to identify it and find its meaning e records the amount of resources Central Processing Unit Time Input outputs used by the job when it is executed Messages and Return Codes Directory How is the JOR organized The JOR has two subordinate sub reports e the Job Data Introduction and Translation Report that is produced when job descriptions or data enclosures are entered into the system the Job Execution Report that is produced when the job executes When data is entered the Job Execution Report is not produced because the JCL statement does not imply that a job was run The JOR messages usually begin in column 11 of the listing The left margin columns 1 to 10 is for emphasizing important messages for example start and end step messages and error messages The Output Writer prints the JOR when the job terminates Then the JOR is automatically deleted Sometimes however the Output Writer does not print the JOR service jobs for example 1 2 47 A2 10UJ 2 Interpreting Er
564. s in the catalog with the same name but possibly with a different type 8 8 47 A2 10UJ DCT Messages Result The utility is not performed Action Use CATLIST to check catalog contents DCT56 object name ATTEMPT TO CREATE ILLEGAL PATH STRUCTURE IN CATALOG Meaning Creation of a catalog object has been requested but the catalog sequence rules have not been followed e g an attempt has been made to create a file or directory entry under a file entry Result The utility is not performed Action Ensure that the request was made in the correct sequence DCT57 object name OBJECT TYPE DOES NOT MATCH WITH CATALOG INFORMATION Meaning The type of the object on which an operation has been requested is not known by the catalog access method This message indicates a system error Result The utility is not performed Action Contact the Service Center DCT58 object name UNRECOVERABLE I O ERROR IN CATALOG Meaning An I O error occurred when accessing the specified catalog Result The utility is aborted Action Check the volume and the device supporting the catalog DCT60 name GENERATION GROUP IS FULL MAXIMUM NUMBER IS REACHED Meaning The maximum number of generations allowed for an open loop generation group has been reached Result The utility is not performed Action Check nbgen characteristic of the generation group DCT61 name MAXIMUM ABSOLUTE GENERATION NUMBER IS REACHED Meaning Appli
565. s inhibited 47 A2 10UJ 6 1 Messages and Return Codes Directory Action Contact the Service Center CK01 03 UNALLOWED ISD S Meaning The step uses system mechanisms that are incompatible with checkpoint Result Execution proceeds The checkpoint is taken but problems may arise at restart time Action Contact the Service Center CK01 04 MISSING REPEAT OPTION CHKPT DENIED Meaning The running step contains activations of the checkpoint mechanism but since the step has not been declared repeatable no REPEAT parameter in the STEP JCL statement the checkpoint activation is useless thus it is inhibited Result Execution proceeds but the checkpoint mechanism is inhibited CK01 20 PENDING TIMER REQUESTS Meaning The running step performed timer requests before the checkpoint was taken If the step is restarted these requests may be lost For example if ELAPTIME was specified in the STEP JCL statement and the time is over during the restart of the steps the time limit will be ignored Result Execution proceeds checkpoint is taken CK01 21 PENDING OPRTR COMMANDS Meaning The step performed dynamic creation of commands before the checkpoint was taken If the step is restarted the created commands become unknown This message may indicate a system error Result The checkpoint taken execution proceeds CK0O2 xx CK code checkpoint code RC edited return code RESTARTING FROM CHKPT n STEP ABORTED WH
566. s set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn FILCHECK NOT PERFORMED UNRECOVERABLE I O ERROR Meaning An J O error has occurred during the operation of FILCHECK Result FILCHECK is not performed Action Analyze the return code and contact the Service Center ifn ERROR IN ACCESS METHOD ADDITIONAL INFO info Meaning Internal error The additional information is the error number Result Processing ends abnormally Action Contact the Service Center ifn ILLEGAL ACCLEVEL PHYSICAL FOR COMPACTED FILES Meaning For compacted files access is allowed only at record level Result The library file cannot be opened and an abnormal return code is set by the access method Action Such a message normally indicates a system error Contact the Service Center ifn CANNOT FORMAT FILE LOGTRKSZ MUST BE AT LEAST n Meaning The current allocation parameters blocksize file size or maximum size do not allow the building of control information BAM Block Allocation Map in the library Result The file cannot be opened and the return code BAMOV is set by the access method 47 A2 10UJ QL22 QL24 QL25 QL26 QL27 47 A2 10UJ IFN IFN IFN IFN IFN QL Messages Action This message indicates a system error when the file has been allocated by the JCL statement LIBALLOC Report the problem to the Service C
567. s to access this file according to the access mode specified ACCESS parameter of JCL statement ASSIGN Result This error is usually detected at step initiation time the step cannot be started Action Check that the ACCESS mode is correct Note that in the ASSIGN statement if no ACCESS parameter is specified ACCESS WRITE efn FILE GENERATION UNKNOWN IN CATALOG Meaning In the JCL statement ASSIGN the catalog file name includes a generation number which does not exist in the catalog The reason may be one of the following e the name specified is not the name of a generation group e the generation number is obsolete e the generation number has not been created and does not correspond to the next generation to be created Result This error is usually detected at step initiation time the step cannot be started Action Use the CATLIST utility to check the generations present in the catalog efn REFERENCED CATALOG CANNOT BE ACCESSED Meaning In the ASSIGN statement a catalog rank is referenced through CATALOG i but the value i does not lead to a valid catalog Either there is no CATALOGi parameter in the active ATTACH statement or the CATALOGi parameter in the active ATTACH statement specifies a DUMMY catalog Result This error is usually detected at step initiation time the step cannot be started Action Check the active ATTACH statement 47 A2 10UJ DS Messages DS09 efn OLDEST AND NE
568. s underlined by a UNEXPECTED END OF DSL Action The option string or DSL Data Services Language must be corrected Each error is underlined by a 47 A2 10UJ TD Messages TD02 19 INVALID NUMERIC VALUE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 20 ILLEGAL ZERO VALUE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 21 PARAMETER VALUE gt MAXIMUM ALLOWED Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 22 KEYWORD VALUE IS NOT ALPHANUMERIC Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 23 UNKNOWN KEYWORD OR OUT OF CONTEXT Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 24 INVALID FIELD POSITION Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 25 INVALID FIELD LENGTH Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 26 INVALID FIELD LENGTH FOR FIELD TYPE Action The option string or DSL Data Services Language must be corrected Each error is underlined by a TD02 27 2ND CHAR FIELD LENGTH NOT 1ST LENGTH Action The
569. sage Warning Dump taken No Recipient of the message Main Operator MU25 CANNOT ACTIVATE SPAWNING TRANSACTION AT RESTART Action None internal error The spawned transactions are lost Type of message Warning Dump taken No Recipient of the message Main Operator 29 6 47 A2 10UJ MU and MV Messages MU26 CANNOT SWITCH SHARABLE MODULE LIBRARIES AT RESTART Action Check that at least one module of each sharable module library is present using the command DC BS SM If necessary load any unloaded modules at least one for each library using the SYSMAINT or MNSYS processor Re issue an MDTDS SMLIB command to re establish the TPR library search rules of the previous TDS session Type of message Warning Dump taken No Recipient of the message Main Operator MU27 SWAP DIRECTORY NOT AVAILABLE Action An error has occurred at TDS warm restart TDS has overridden the swap directory lt tdsname gt RECOV the TDS application proceeds normally Type of message Warning Dump taken No Recipient of the message Main Operator and TDS Master MU28 CANNOT ENTER CORRESPONDENT xxxxxxxxxxxx IN TDS TABLE Action None internal error Type of message Warning Dump taken No MU29 COLD RESTART FORCED DUE TO UNSUCCESSFUL FILE RECOVERY Action Check the GCOS 7 restart conditions Some files may be inconsistent as TDS recovery procedures do not occur at GCOS 7 warm restart Type of message Warni
570. sage to the Service Center 47 A2 10UJ 31 11 Messages and Return Codes Directory 31 12 47 A2 10UJ 32 PCF Messages General Environment PCF messages are produced by the Program Checkout Facility component of the system Pertinent Manual Program Checkout Facility User s Guide ccccccccccccccscccseccseceetnteeneensees 47 A2 15UP PCFOO lt dynamically created message text gt Meaning The message cannot be directed to the standard output Result The job is aborted Action Variable depends on the nature of the error PCFO1 PCF UNABLE TO EXPAND ITS COMMAND TABLE Meaning There is no more space available for PCF to create its data structures Result The job is aborted Action Lower the consumption of type segments by the process group being debugged PCFO2 UNRECOVERABLE ERROR IN PCF I O PROCEDURE Meaning PCF can no longer perform the inputs and outputs which are necessary during its execution Result The job is aborted Action This error is external to PCF The action to be taken depends on the cause of the error It may be an error in the line the terminal or the telecom 47 A2 10UJ 32 1 Messages and Return Codes Directory 32 2 47 A2 10UJ PTnn PTnn PTnn PTnn 47 A2 10UJ 33 PT Messages General Environment PT messages are produced by the GCOS 7 Passthrough mechanism Message Descriptions The gener
571. sed due to MIRROR disk pairing The volume is not a disk System error while allocating a disk for several steps Volume not allocated to the requestor or incorrect allocation options Media dismounting cannot be avoided between two allocations 56 7 Messages and Return Codes Directory 56 8 DVMGT 40 IOFAIL DVMGT 41 ALMOST DVMGT 41 ARGERR DVMGT 41 NOTDONE DVMGT 42 WRONGDV DVMGT 43 NOTDONE DVMGT 44 RSUNKN DVMGT 45 DVNAV DVMGT 45 TPUNKN DVMGT 48 SYSOV DVMGT 51 ARGERR The device to be passed has been declared unavailable by the operator Abnormal I O termination while resetting file locks in file labels or releasing the space allocated to temporary files on a VBO disk Normal return code Accessibility checking unlocking of file locks or mirror disks resynchronization cannot be performed for some disks affects only SHARED disks System error Incorrect parameters Accessibility checking unlocking of file locks or mirror disks resynchronization cannot be performed due to a system problem affects SHARED disks only System error Value out of range or unused due to MIRROR disk pairing File locks VTOC locks or temporary files have not been cleaned The volume is not a SHARED or RESIDENT disk The cleaning could not be performed GCOS has been started with NCONFIG and the disk does not belong to the standard configuration Information has b
572. segment record segment used for sorting cannot be created A return code from H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem UNABLE TO OPEN COMFILE Meaning A return code from H_OPEN is given Action Correct the JCL UNABLE TO GET DSL RECORD Meaning A return code from H_OPEN is given Action Report the problem to Technical Support UNABLE TO CLOSE COMFILE Meaning A return code from H_OPEN is given 47 A2 10UJ TDO2 60 TDO2 61 TDO2 62 TDO2 64 TDO3 01 TD03 02 TD03 03 TD03 04 47 A2 10UJ TD Messages Action Report the problem to Technical Support ERRORS IN STATE IOF PARAMETERS Meaning A return code is given from H_STIOF Action Report the problem to Technical Support UNABLE TO IDENTIFY PRTFILE Meaning A return code is given from H_RTVLID Action correct the JCL or report the problem to Technical Support INFILES NUMBER IS lt 2 OR gt 8 Action Use INFILE if only one input file 8 files is the maximum SUM FIELD VV OVERLAPS SUM FIELD WwW KEY FIELD OUT OF ALL ARRANGE FIELDS VV WW are the ranks of the fields involved among the sum or key fields Action Correct the DSL USER SORT KEYS ARE TOO LONG Meaning The total length of the sum or key fields exceeds 7000 bytes Action Correct t
573. sers and are self explanatory SYSTEM messages refer to some malfunction of the system itself either hardware or software They have a message code and number but no text You should inform the Service Center if this type of message occurs 2 1 Messages and Return Codes Directory NOTES 1 This manual does not document messages produced by some utility programs You can find these messages in the appropriate user s manual 2 This manual does not document self explanatory messages destined for Bull software or hardware engineers Messages are grouped according to the system components that detected the error There is one section for each class of message The name of the system component that detected the error is at the beginning of each section For each message there is when possible Meaning Why the error occurred Result What happened because of the error Especially the consequences of the error regarding the execution of the step Action What you should do The following table lists message codes and their corresponding system component names Message codes preceded by an asterisk are documented in this manual The other messages are documented in the appropriate user s manual Table 2 1 Message Codes and System Component Names Code System Component Name ACT Job Accounting AL Add and Delete Functions ARM Automatic Resource Manager AT System Disks Configuration AV Availability Control BA
574. ss MUxx message text 47 A2 10UJ hhmmss is the time in hours minutes and seconds at which the error occurred The prefix MU or MV always appears both in the JOR and on the screen xx stands for the number of the message Messages in this section are followed by Action Tells you what to do about the message Type of message WARNING or FATAL error message Dump taken Whether or not a dump is taken YES or NO 29 1 Messages and Return Codes Directory mMuoo MU01 MU02 MU03 MU04 MU05 29 2 Recipient of the message Main Operator TDS Master or both CONNECTION TO COMMUNICATIONS NOT ESTABLISHED RC return code Action Run the NETGEN utility before starting the TDS session OMH COMMAND FOR MASTER OF TDS CANNOT BE CREATED Action Ensure that the TDS name is not the same as a command name Delete dynamic commands created by other jobs Consult the Service Center Type of message Fatal Dump taken No Recipient of the message Main Operator UNSUCCESSFUL TDS TABLE ENTRY CREATION Action If the return code is USERUNKN ensure that the TDS was not started by a user under the OPERATOR project with the Station attribute whose value is a site name not MAIN For more information see the TDS Administrator s Guide Starting a TDS Session In other cases this is an internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator UNAB
575. ssages and Return Codes Directory DCT03 DCT04 DCT05 DCT06 DCT07 SUBMITTER IS NOT OWNER OF DIRECTORY Meaning A catalog file creation CATBUILD has been requested but the project under which the step was running has no OWNER rights on the directory under which the catalog is to be created Result The catalog is not created Action Check owner rights SUBMITTER IS NOT OWNER OF CATALOG FILE ENTRY Meaning A catalog file creation CATBUILD has been requested The file entry for the catalog file already exists in the SITE CATALOG but the project under which the step was running is not the OWNER of the file entry Result The catalog is not created Action Check owner rights CATALOG OWNER IS NOT OWNER OF VOLUME SITE SITE Meaning A catalog file creation CATBUILD has been requested The volume specified for allocation of space for the file is protected that is only the volume owner can allocate a file on the volume and the project under which the step is running is not the owner of the volume Result The catalog is not created Action Modify the volume specification CATALOG DOES NOT EXIST NO OTHER CATALOG CAN BE BUILT Meaning 1 Creation of a private catalog has been requested This operation requires the cataloging of the catalog file in the SITE CATALOG As the SITE CATALOG does not exist on the site the operation cannot be performed 2 Creation of a System Ca
576. stem Nucleus VCAM ENTRYOV 1223 BFAS Sequential Disk Dynamic Addresser Dump Analyzer File Management FORMS GAC Journalization OMH System Nucleus 47 A2 10UJ GAC TDS Interface H_SCHJ DATANAYV to IOFAIL Return Codes Emulator unknown End of logical module printer Request has been enqueued A TDS Commitment Unit is unable to execute because GAC has imposed total serialization GAC notifies TDS when the CU may be re activated Selection not possible Request has been enqueued Task Management The task or process whose ABORT was H_OPNDLG OPEN File Storage and Tape Handling OPEN Message Management Automatic Resource Manager requested H_ABTSK or H_ABTPCS internal primitive was in a critical section the action will be performed as soon as the process leaves the critical section Request has been enqueued Number of entries overflow The number of table entries e g buffers semaphores reserved for this process group has been exceeded Number of blocks for an EPT exceeds the maximum allowed 20 There are no more free buffers or descriptors Check the usage of the descriptors Add the macro H_ DPANCLOSES There are too many open VTOCs performed simultaneously on the disk Maximum number of active or frozen forms exceeded Check that the sequence of the SDCI verb does not overflow the specified limitations There is no space available for GAC tables 1 A semaphor
577. stem exception This alphabetical mnemonic PROCEXCP corresponds to the numeric code 04C5 The system component name EXCEP corresponds to the system component number 2083 3 is the internal number within the system component 50 2 47 A2 10UJ Interpreting Return Codes FILE CANNOT BE OPENED FOR IFN MYIFN EFN MYEFN 4BC61007 gt DFPRE 6 EFNUNKN The above message printed in a JOR indicates that the return code EFNUNKN has been set by system component DFPRE File Processing Preparation The file to be opened and assigned to the internal file name MYIFN was not been found on the specified volume Handling Errors Whenever a system component detects an abnormal situation before returning control to another system component or run time package the caller it sets a register to a value that e identifies the component which has detected the abnormal situation e gives the coded reason for the abnormal situation The content of this register is called the return code value The return code contents may appear in error messages in an edited format When control returns to the caller the caller analyzes the return code value and the following action may be taken 1 The value found corresponds to a functional condition The component processes this condition and resets the value of the register 2 The value found corresponds to an abnormal condition The component may give a more precise reason for the
578. stency between the new generation requested by the user and the real state of the generations DFPRE 6 FLABUNKN A disk file label cannot be found An allocation request was made but the NOALLOC parameter was specified for the open DFPRE 6 FLNMNAV Generation switching cannot be performed because both the old and new generations are already present 57 12 47 A2 10UJ DFPRE 6 FUNCNAV DFPRE 6 FVNOTCUR DFPRE 6 MDERR DFPRE 6 NOTOBS DFPRE 6 WRONGORG DFPRE 6 WRONGPMD DFPRE 8 LNERR 47 A2 10UJ File Management Return Codes in More Detail An attempt has been made to access a native tape file with FILEFORM NSTD in output mode A disk file is being processed in MOUNT ALL mode and the volumes list in respect to the end of space indicator of labels is incorrect Set in the following cases For a disk file the sequence of volumes in the media list specified for the assign is incorrect For a diskette file the volume sequence number found in the label is neither one nor zero Generation switching cannot be performed because the expiration date of the old generation has not been reached Set in the following cases The organization of the file does not match the ORGCHECK option specified for the open The ORGHDR field specified to the primitive H_DFLDEF was Incorrect Set in the following cases ACCESS READ for the assign and the processing mode for the open is neither INPUT nor REVE
579. sult In a Batch environment the step execution is aborted Action Check that the efn specified in the JCL statement ASSIGN is the one expected Run FILDESC in order to ascertain the file format and file organization 9 17 Messages and Return Codes Directory DDM00434 lt error localization gt MISMATCH BETWEEN SCHEMA NAMES OR DMCL REFERENCE DATES IN SCHEMA schema name OF LIBRARY ASSIGNED TO IFN DDLIBi area name index name date time AND IN LABEL OF FILE ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name schema name date time Meaning IDS detected an inconsistency between the different elements which participate in the data base environment i e the schema and the data base files This message may be output when the schema has been reprocessed after the pre allocation of a data base file Further explanations about global consistency checks can be found in the DS II User s Guide Result The step execution is aborted Action Check that the schema has been retrieved in the expected library check that the ASSIGN statements specify the correct files In the case where the program has been redefined without reallocating the data base files check that the data has been forced to the file allocated DDM00435 lt error localization gt MISMATCH BETWEEN FILE NAMES IN SCHEMA schema name OF LIBRARY ASSIGNED TO IFN DDLIBi area name index name AND IN LABEL OF FILE ASSIGNED TO IFN ifn area
580. t ASSIGN or in the catalog entry if the file is cataloged is illegal Result The file cannot be opened and the abnormal return code SCHTVIOL is sent Action Correct the JCL statement ASSIGN or modify the catalog entry QLO3 SHARE FREE NOT SUPPORTED ONLY DIR OR NORMAL ALLOWED Meaning The SHARE FREE option found either in the JCL statement ASSIGN or in the catalog entry if the file is cataloged is illegal Result The file cannot be opened and the abnormal return code SCHTVIOL is sent Action Correct the JCL statement ASSIGN or modify the catalog entry QLO4 SHARE ONEWRITE NOT SUPPORTED ONLY DIR OR NORMAL ALLOWED Meaning The SHARE ONEWRITE option found either in the JCL statement ASSIGN or in the catalog entry if the file is cataloged is illegal Result The file cannot be opened and the abnormal return code SCHTVIOL is sent Action Correct the JCL statement ASSIGN or modify the catalog entry QLO5 UNSTABLE FILE FILECHECK IS TRIGGERED FOR FILE lt FILE_NAME gt Meaning The file is found unstable at OPEN time A complete FILECHECK is necessary Result FILECHECK is executed Action None QLO6 UNSTABLE FILE FILECHECK IS TRIGGERED FOR FILE lt FILE_NAME gt Meaning Salvaging requested by OPEN on detection of an unstable file Result A short salvaging is executed Action None QLO7 ACCLEVEL PHYSICAL NOT SUPPORTED Meaning Access is only allowed at logical record level Result The file canno
581. t The alias is inserted in the chain of mains and aliases ifn CHANGE NAME ALIAS FUNCTION COMPLETED Meaning The CHNAME function on an alias is complete Result The file is in a coherent state ifn FILCHECK UTILITY HAS TO BE LAUNCHED Meaning The subfile identifiers must be reorganized When the file was opened an overflow was detected on a subfile identifier number The file is processed in degraded mode Result The subfile identifiers are not reorganized Action Activate FILCHECK as soon as possible ifn UNABLE TO REWRITE FILE LABEL2 Meaning An error has occurred while writing the file label2 Result File label2 is not updated to reflect the exact state of the file Action Contact the Service Center ifn SUBFILE DELETION FUNCTION COMPLETED BUT LOGICAL TRACKS MAY BE LOST Meaning The main entry was being deleted The data part and the aliases if any are also deleted Result The subfile is deleted Some logical tracks may be lost 47 A2 10UJ QL76 QL77 QL78 QL79 QL80 QL81 QL82 QL84 47 A2 10UJ IFN IFN IFN IFN IFN IFN QL Messages ifn INCONSISTENT ALIASES FOUND SALVAGING IS TRIGGERED Meaning During the processing of a V1 V2 file some aliases have been found without a main Result Dynamic file salvaging is triggered ifn UNSTABLE FILE SALVAGING IS TRIGGERED Meaning The file was found to be unstable when it was opened File Salv
582. t for more details refer to the UFAS User s Guide Result This message is printed each time a UFAS file is deassigned DUF04 IFN ifn LABEL HAS BEEN SALVAGED Meaning The file label has been salvaged by the UFAS File Salvager at the first OPEN of the file in write mode following a system crash Result The UFAS File Salvager is called automatically Action None 47 A2 10UJ 13 1 Messages and Return Codes Directory DUFOS5 DUFO6 DUFO7 DUFOS8 DUFO9 DUF10 13 2 IFN ifn PRIMARY INDEXES HAVE BEEN SALVAGED Meaning The primary indexes have been salvaged by the UFAS File Salvager at the first OPEN of the file in write mode following a system crash Result The UFAS File Salvager is called automatically Action None IFN ifn SECONDARY INDEXES HAVE BEEN SALVAGED Meaning he secondary indexes have been salvaged by the SORTIDX utility IFN ifn SECONDARY INDEXES HAVE TO BE SALVAGED Meaning The UFAS File Salvager has not been able to salvage the secondary indexes of the UFAS file being processed at the time of a system crash Action Run the SORTIDX utility on the unstable file IFN ifn UNRECOVERABLE I O DISK ADDRESS ccccttttrr I O TERMINATION MESSAGE xxxx Meaning An I O error has been detected during access to a UFAS file The I O termination message gives a detailed status of the error Result This error may result in program abortion Action Refer to the section on I O complet
583. t is sent Name of the terminal Name of the paper format Code specifying why a connection is refused Name of the driver Name of the command Name of the user who created the report Run occurrence number of the user s job that created the report Return Code Name of the media disk used Name of the procedure Name of the subfile when the Star Convention is used 47 A2 10UJ 46 2 TWwol TWO3 TW04 TW05 TW06 TW07 TW Messages Messages GENERATION NOT PERFORMED Meaning Message sent at system initialization or at Command Handler launching A GTWriter generation must be done Who receives the message The MASTER lt command gt COMPLETED Meaning The command has been taken into account and executed by the Command Handler Who receives the message The COMMANDSUB lt Rxxxx gt TERM lt dest gt USER lt user gt FROM lt ron gt Meaning Message sent after a DPRINT request to indicate that a report Rxxxx is created Who receives the message The COMMANDSUB lt Rxxxx gt RE STARTED ON lt dest gt COPY n MB lt mb gt Meaning Start or restart of report printing If it is a restart this happens after a RTO command has been issued COPY if present indicates that this is the copy number n of that report MB if present indicates the name of the member whose printing begins when using the Star Convention Who receives the message The SUBU
584. t allowed in foreign processor 47 A2 10UJ PARITYER 1E09 PATHNAV 0A20 Availability Control VCAM ISO PCERR 1822 PCREJCT 1713 PCSERR 1869 System Nucleus Internal PCSNAV OAOB PCSUNKN 1012 System Nucleus Internal PDIOV 122A System Nucleus Internal PLDSTKOV 122B System Nucleus 47 A2 10UJ ISFM IMRV Task Management Task Management Dynamic Addresser Retrieve Dynamic Addresser IONOP to RESIDENT Return Codes Parity error Message path not available AVR cannot set the function mask because the path name is invalid A problem occurred while interfacing with the transport error Check the network address configuration and network availability Physical channel error Presentation control rejected Error in the process identification When using the H_WAITSK external primitive or the H_WTPCS internal primitive the specified task the end of which is to be waited for is the main task of the process group Check the activation context of the H_WAITSK primitive Process not available Process unknown When using the H_WAITSK external primitive or the H_WTPCS internal primitive the specified task occurrence number or process number for H_WTPCS is invalid the value is greater than the number of processes in the process group PDI overflow The PDI Private Data Information area is too small Modify the caller s code Process local detachm
585. t be opened and the abnormal return code LEVVIOL is sent 47 A2 10UJ 35 13 Messages and Return Codes Directory QLO8 QLO9 QL10 QL1 QL12 QL17 35 14 Action Correct the file definition ACCLEVEL FILECHECK REPORT FOR FILE lt FILE_NAME gt Meaning File recovery has been launched on explicit request RECOVER command of the MAINTAIN FILE processor Result FILECHECK is executed Action None END OF FILECHECK Meaning FILECHECK has been completed Result The file has been successfully recovered Action None END OF SALVAGING Meaning SALVAGING has been completed Result The file has been successfully recovered Action None SUBFILE INDENT NUMBER OVERFLOW LAUNCH LOGICAL COPY OF FILE Meaning Too many subfiles have been created Result It is not possible to create any more subfiles Action Perform a logical copy of the file UNRECOVERABLE I O ERRORS FILE HAS BEEN LEFT UNSTABLE Meaning Fatal I O errors occurred during salvaging Result The file is left unstable and cannot be accessed Action Restore the file from a previous save FILCHECK NOT PERFORMED UNRECOVERABLE I O ERRORS Meaning Fatal I O errors occurred during salvaging Result The file is left unstable and cannot be accessed Action Restore the file from a previous save 47 A2 10UJ QL19 QL22 QL23 QL30 QL31 QL32 47 A2 10UJ QL Messages ERROR ACCESS M
586. t be provided in the CU library to create the work file even when an old version of the CU already exists in the CU library Result Compiling stops The old version of the CU if it exists is still available in the CU library Action Compile the program again using another CU library or delete the old CU If the incident was an I O error check the disk and the disk pack supporting the library 47 A2 10UJ 20 7 Messages and Return Codes Directory GPL22 STOW ADD CULIB ALIAS alias name TO member name RC edited return code Meaning The compiler is processing the GPL program member name and this program contains a secondary entry point named alias name The compiler is trying to store the name of the secondary entry point as an alias of the main entry point i e both names lead to the same CU member in the library directory An incident occurred the reason being given by the return code during this operation The most common incident is the return code DUPNAME meaning that the name of the second entry point already exists in the library directory either as the main entry point or as the second entry point of another procedure Result The new CU is created in the library but the name is not cataloged in the directory as an alias of this CU Action Use the LIST command of LIBMAINT CU to check the contents of the CU library GPL23 CLOSES DELETE CULIB MEMBER member name RC edited return code Mea
587. t no After Journal file is available To add new media use MNJAS COMMAND MDMD ADDPMIMMD vsn Attempt to read inaccessible field of PCB internal error Attempt to modify file protected by Before Journal Journal suppressed by the SUPPRESS BEFORE JOURNAL clause 47 A2 10UJ JCLERR JENTFBID JNBERR JNBUNKN JOBCMD JOBNRTRY JOBRTRY JOBUNKN 47 A2 10UJ IONOP to RESIDENT Return Codes 1891 Error in JCL statement Catalog Management ATTACH Error in the JCL statement ATTACH Check and modify this statement OMH Command Invalid syntax Management 1701 Job entry forbidden 181C J number error Journalization Error in the J number in the parameter of the H_JRNAL _EJCT procedure 1009 J number unknown Journalization When J attempted to roll back a file after a crash the J number is unknown for this file because it had just been deassigned at crash time Sent with the message JL06 00E6 A job command is detected COBOL Status Key value 9R Direct File READ A JOB command has been detected in an input Assignment file 1896 Job command read out of standard reading mode 1897 Job command is to be reread 1006 Job unknown Job Management H_ ABTPG The job number of the process group is unknown or not allocated No effects Recoverable error H_GETRON Unknown job H_RDJOB H SCH READ J OBID 53 3 Messages and Return Codes Directory JPNBERR JRNALERR JUMPERR JUSTEXEC
588. t of the message TDS Master 47 A2 10UJ MU and MV Messages MU36 CANNOT CLEAR SYSTEM FILE AT COLD RESTART Action None internal error which must be reported Type of message Warning Dump taken No Recipient of the message Main Operator MU37 TDS APPLICATION NOT GENERATED Meaning The TDS application is not generated Action Run the TP7GEN utility Type of message Fatal Dump taken No Recipient of the message Main Operator MU38 ERROR WHILE ADDRESSING FILE STRUCTURES Action If a hyphen is used in an internal file name specified at TDSGEN ensure that a reserved word follows the hyphen Type of message Fatal Dump taken Yes Recipient of the message Main Operator and TDS Master MU39 ERROR DETECTED BY IDS2 ACCESS METHOD Action None internal error Type of message Warning Dump taken Yes Recipient of the message TDS Master MU40 CANNOT CREATE MEMORY AREAS Action None internal error Type of message Warning Dump taken No MU41 TDS IDS INTERFACE ERROR Action None internal error 47 A2 10UJ 29 9 Messages and Return Codes Directory MU42 MU43 MU44 MU45 29 10 Type of message Warning Dump taken Yes Recipient of the message TDS Master SEGMENT SIZE CANNOT BE INCREASED OR CREATED INIT Action None internal error Type of message Fatal Dump taken Yes Recipient of the message Main Operator and
589. t the JCL THE DEVICE MODE IS NOT ALLOWED WITH ANY MEDIA OPTION Meaning The Test and Diagnostics request uses the ANY MEDIA option Result The step cannot be started due to a system error Action Contact the Service Center NO VOLUME NAME MUST BE GIVEN IN DEVICE MODE Meaning The Test and Diagnostics request uses a volume name Result The step cannot be started due to a system error Action Contact the Service Center A DEVICE NAME IS MANDATORY IN DEVICE MODE Meaning The device name is missing in the Test and Diagnostics request Result The step cannot be started due to a system error Action Contact the Service Center A VOLUME NAME IS MANDATORY FOR DISKS Meaning The step requests a disk without giving its name in the JCL ASSIGN statement Result The step cannot be started Action Correct the JCL THE DEVICE MODE IS MANDATORY FOR T amp D Meaning Error in the Test and Diagnostics request Result The step cannot be started due to a system error Action Contact the Service Center 14 7 Messages and Return Codes Directory DV35 DV36 DV38 DV39 DV40 14 8 THE DEVICE MODE IS NOT ALLOWED FOR NON REMOVABLE DISKS Meaning Illegal allocation of a volume by a job Result The step cannot be started due to a system error Action Save the SYS LOGC and SYS SWLOG files domain DVMGT and contact the Service Center MIRROR VOLUME ON device id REQUEST IS REJECTED Mean
590. ta Terminal busy input data correct Terminal busy input data error Retry count overflow no input data Retry count overflow input data correct Retry count overflow input data error Station declared under test by MLA Illegal station I O request Message not acknowledged no input data Message not acknowledged input data correct Message not acknowledged input data error VIP time out no input data VIP time out input data correct VIP time out input data error Buffer not assigned Disk address violation File mask or function mask violation Invalid flag modification Invalid branch address Invalid CCE number 47 A2 10UJ 47 A2 10UJ 2600 26FF 2800 280F 2800 2807 2800 2801 2802 2803 2804 2805 2806 2807 2808 280F 2808 2809 280A 280B 280C 280D 280E 280F CCILLEG IOTERM DSBO DSB00 DSBO1 DSB02 DSB03 DSB04 DSBO5 DSB06 DSB07 DSB2 DSB20 DSB21 DSB22 DSB23 DSB24 DSB25 DSB26 DSB27 Return Codes Listed in Numerical Order Illegal CCE Hardware detailed status byte Detailed status byte 0 Detailed status byte 0 for channel 0 Detailed status byte 0 for channel 1 Detailed status byte 0 for channel 2 Detailed status byte 0 for channel 3 Detailed status byte 0 for channel 4 Detailed status byte 0 for channel 5 Detailed status byte 0 for channel 6 Detailed status byte 0 for channel 7 Detailed status byte 2 Detailed status byte 2 for channel 0 Detailed status byte 2 for channel 1 De
591. table Reconfigure the system 47 A2 10UJ TDS XCP2 RTCOVIDC 1E21 RTCOVIDE 1E22 RTCOVNID 1E20 RTCOVNID Various Operations Series 100 Communications RWIDERR 1830 Physical I O Access RWIDUNKN 1002 SADMVIOL 1624 Catalog Management CATMOTIF CATALOG Others SAMERR 1850 Dynamic Addresser SASCUD 1A2D Mathematical Package SAT2ZR 1A30 Mathematical Package 47 A2 10UJ RESNAV to YETALLOC Return Codes Reference to a wrong conversation unknown or wrong type ina TDS XCP2 verb Refer to the CPI C XCP2 User s Guide Retry count overflow input data correct Retry count overflow input data error Retry count overflow no input data VIP Retry count overflow has occurred or TC but no text message has been received RW session identification error Erroneous RWI session identifier internal error RW session identification unknown SYSADMIN identity violation Requested function may be performed only by users of the SYSADMIN project SAM integrity error Illegal non zero SAM pattern Stack segment has been damaged Modify the user s code Undefined for ARG gt 1 Arc sine Arc cosine argument absolute value is gt 1 The result is undefined double precision Both are equal to zero Both arguments of the DATAN2 function are zero The result is undefined double precision 54 5 Messages and Return Codes Directory SATNHUN 1A7C SCATUNKN 1016 Catalog Management An
592. tact the Service Center Message count overflow or error in command interpreter No action required recoverable by system A disk I O request specifying an invalid number of records less than 0 or greater than 5 has been attempted Take a dump and call the Service Center Entity found but out of allowed domain The directory or terminal configuration is not coherent with the basic network just enabled Run the CRNETGEN utility to recreate the full set of configurations 1 At least one named object is connected to another dimension 2 Use LM in a command to disc SM sharable module entry found in wrong SM set Load correct SM in backing store 1 A block must be ELA and is BLA 2 A block must be BLA and is ELA 3 The specified block does not belong to the file In all cases contact the Service Center Multiplexing is requested Name error A warning indicating that an unknown variable has been specified Entity not assigned to the process group Entity not available down locked No complementary record allowed 47 A2 10UJ NEGSZERR 1899 EQN NI File Management Tape Handling System Nucleus Dynamic Internal Addressing NEMPTY 0080 009F NEXPDERR 180A MCS NFREEVMA 1709 System Nucleus VMM NJAFT 1031 Journalization NMTCHERR 180D Catalog Management 47 A2 10UJ IONOP to RESIDENT Return Codes Unexpected negative size has been found File Storage and
593. tailed status byte 2 for channel 2 Detailed status byte 2 for channel 3 Detailed status byte 2 for channel 4 Detailed status byte 2 for channel 5 Detailed status byte 2 for channel 6 Detailed status byte 2 for channel 7 55 19 Messages and Return Codes Directory 55 20 47 A2 10UJ 47 A2 10UJ 56 Device Management Return Codes in More Detail This section explains in more detail the return codes set by the Device Management modules The return codes are given in the following format lt mnemonic gt lt number gt lt return code gt where lt mnemonic gt is the SIU name always DVMGT with the single exception of HPR lt number gt is a one or two digit number which indicates the internal function of the module i e the procedure which set the return code lt return code gt is one of the return codes explained in this manual The return codes are listed in numerical order of function number HPR 0 DVIDFBID The allocation of the printer has been rejected The requested belt is unknown in SYS URCINIT DVMGT 3 BUSY The media has been declared unavailable by the system cartridge library only Resource not currently available DVMGT 3 HARDMALF The media has been declared unavailable by the system cartridge library only Hardware problem DVMGT 3 MDNAV The media has been declared unavailable by the system or after a CR or CJ command DVMGT 3 RSUNKN The media has
594. talog SYS CATALOG has been requested As no catalog is considered valid by the system if the SITE CATALOG does not already exist the request is denied Result The utility is not performed Action Create SITE CATALOG SYS CATALOG MUST BE BUILT BY SYSADMIN Meaning Creation of the SITE CATALOG or SYS CATALOG has been requested by the CATBUILD utility but the project under which the step was running is not the SYSADMIN project 47 A2 10UJ DCT Messages Result The utility is not performed Action Try again under the SYSADMIN project DCT08 INFILE AND OUTFILE CATALOGS ARE IDENTICAL Meaning A CATMOVE operation has been requested but the receiving catalog is the same as the originating catalog i e catalog names devclass and media names are the same Result The utility is not performed Action Check the catalog names DCTO9 INFILE AND OUTFILE CATALOGS ARE NOT BOTH SYS CATALOG Meaning A CATMOVE operation has been requested and one of the catalogs involved is a system catalog but the other is not The contents of a system catalog can only be moved to a system catalog and conversely a system catalog can only receive objects coming from another system catalog Result The utility is not performed Action None DCT10 CATALOG STATES ARE INCOMPATIBLE MOVE REFUSED Meaning A CATMOVE operation has been requested but the receiving catalog is not protected while the originating catalog is This op
595. ted in a previous statement without index on line The record was previously erased or modified Action Rebuild the keys in the corresponding index Contact the Service Center if necessary DDM00775 lt error localization gt DATA BASE INDEX INCONSISTENCY DETECTED DURING COMPUTATION OF KEY key name DATA BASE RECORD AT ADDRESS A P L DOES NOT LEAD TO A VALID INDEX ENTRY Meaning This error occurs when using the FIND or MODIFY statement There is no key entry for this record The area was updated in a previous statement without the index on line The record was previously stored or modified Action Rebuild the keys in the corresponding index Contact the Service Center if necessary DDM00896 lt error localization gt DML INCONSISTENCY Meaning This message usually indicates an IDS II system error at the parameter level The error code is specified in the ORG field of the error localization Result In Batch environment the step execution is aborted Action Contact the Service Center 47 A2 10UJ 9 25 Messages and Return Codes Directory 9 26 DDM00897 lt error localization gt AT LEAST ONE AREA IFN GIVEN IN IDS DEFINITION OF TDS GENERATION DOES NOT LEAD TOA VALID AREA IFN DERIVED FROM THE SCHEMA DEFINITION Meaning Mismatch between area index ifns defined in TDS generation and those derived from DMCL definition and run time specifications Result In a TDS environment the s
596. tempt to delete a file link without having the OWNER access right on that link Result The utility is not performed Action Check project owner access rights object name DUPLICATE NAME MLINK CANNOT BE CREATED FOR MASTER DIRECTORY Meaning Appears when you restore or duplicate an auto attachable catalog An error occurs if at least one of the directories of the catalog is already known in the site catalog either as a master directory or as a master directory link for another catalog Result The utility is performed and so the specified catalog is made auto attachable but the directory that is already known in the site catalog is not created as a master directory link object name ACCESS RIGHTS SETTING FORBIDDEN Meaning When the SITE CATALOG is not protected it is forbidden to set access rights in a private catalog Result The utility is not performed 8 15 Messages and Return Codes Directory 8 16 47 A2 10UJ 9 DDM Messages General Environment DDM messages are produced by the Data Base Control System DBCS The DBCS can be used in Batch TDS or IQS environments Messages may appear during various phases of a session schema subschema loading area index initialization area index processing Error Messages DDM00066 to DDM00279 may appear during the analysis of IDS II run time options they appear interspersed among the trace of run time options printed in the JOR
597. tentially inconsistent since rollback may have been incorrect Action None RY34 ROLLBACK PROCESSING STOPPED BUFFER ACQUISITION PROBLEM 01 SEMAPHORE ACQUISITION PROBLEM 02 JOURNAL LOGICAL TRACK ADDRESS ERROR 03 CHANNEL PROGRAM BUILD ERROR 04 BAD DIALOG WITH TDS 05 JCT CONSTRUCTION ERROR 06 READ ERROR ON JOURNAL 07 EXTENT OPEN DIFFICULTY 08 ABNORMAL USER FILE ASSIGN 09 ABNORMAL GLOBAL OPEN 10 NO EOF ON BEFORE JOURNAL FILE 11 FD CREATION IMPOSSIBLE 12 THE USER FILE CANNOT BE READ IN SYS JURNAL 13 REPORT SEGMENT ACCESS ERROR 14 SHARED FILES SEGMENT ACCESS ERROR 15 Meaning This message is printed in the SYSOUT of the Recovery Step An error at the initialization phase of rollback has been detected causing the immediate 47 A2 10UJ 39 3 Messages and Return Codes Directory RY35 RY36 RY37 ry40 39 4 termination of the Recovery Step The message text is self explanatory for all cases Action None ROLLBACK IS IMPOSSIBLE FOR UPDATES MADE BY JOB user_ron tds_name on file efn file_name rc return code Meaning This message is printed in the SYSOUT of the Recovery Step An incident has occurred when the file named in EFN was being accessed RYO1 will then appear requesting operator intervention and RY35 will appear again if the file remains inaccessible Action Run the utility FILREST then ROLLFWD to reconstruct the file ROLLBACK IS IMPOSSIBLE FOR U
598. tep execution is aborted Action Check the TDS generation or contact the Service Center DDM00922 lt error localization gt DATA BASE ROLLBACK AT STEP LEVEL IS SUCCESSFUL STEP CANNOT PROCEED Meaning The data base has been rolled back correctly but the step cannot proceed The REPEAT statement has been omitted or no previous checkpoint was taken Result In Batch environment the step execution is aborted Action Check if the REPEAT option is present or contact the Service Center DDM00923 lt error localization gt TDS SAVING AREA FOR IDS CURRENCIES TOO SMALL TRANSACTION CANNOT PROCEED Meaning This message appears during the intermediary checkpoint phase before the process is unmapped The DBCS cannot save its structures in the TDS saving area Result The step execution is aborted Action Contact the Service Center DDM00924 lt error localization gt TDS SAVING AREA FOUND INCONSISTENT TRANSACTION CANNOT PROCEED Meaning This message appears during the intermediary restart phase before the process is remapped The DBCS cannot read its structures in the TDS saving area Result The step execution is aborted Action Contact the Service Center 47 A2 10UJ 47 A2 10UJ DDM Messages DDMO0100 lt error localization gt IDS2 PROGRAMMING RULE VIOLATION IN A GIVEN STEP ONE CANNOT EXECUTE BOTH SCHEMA AND SUBSCHEMA DML Meaning It is impossible to access a database using in the same step
599. tep using the After Journal or during execution of the MAINTAIN_JAS utility Pertinent Manuals File Recovery Facilities User s Guide ccccccccccccccecseessesstenecneeseeseenees 47 A2 37UF GCOS 7 System Administrator s Manual ccccccccccccecseesseetscetseeteteteeeaes 47 A2 54US Message Descriptions JP22 jas_name THE jas_name JADIR DIRECTORY FILE IS ALMOST FULL ANY NEW JOURNALIZING ACTION WILL ABORT DELETE IT AND CREATE IT LARGER Meaning The After Journal has detected that its directory is almost full and may no longer ensure file integrity See Note No new File Recovery Unit can start but all those currently executing will terminate normally Any attempt to open a user file will be rejected Action First try to purge the directory file of obsolete information through the MNJAS commands TRANSFER and FORGET _USER FILE If still not successful stop the steps using the After Journal and recreate a larger JAS Directory e enter the command MNJAS jas_name COMMAND DELETE to delete the After Journal e then recreate it with a larger JADIR_SIZE using MNJAS command CREATE Journalization can then resume 47 A2 10UJ 24 1 Messages and Return Codes Directory JP23 JP33 JP33 24 2 The utilities ROLLFWD and DUMPJRNL cannot execute on After Images logged before this operation So before deleting the JAS run FILSAVE on each protected active user file and run DUMPJRNL for each active TDS NO
600. ter record size memory size has caused an unexpected work file occupancy e g one record per block WORK FILE OVERFLOW CHECK FOR AVERAGE RECORD SIZES Meaning The work file is too small according to the Sort parameters record size number of records Action Redefine the work file UNABLE TO CREATE SEGMENT Meaning The buffer segment used for sorting cannot be created A return code from H_SGCR is given The error could be internal to Sort but most frequently either too much memory is required for Sort SIZE in JCL SRTDEF or the number of vacant entries is insufficient linkage problem UNABLE TO CHANGE SEGMENT SIZE Meaning The buffer segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO LOCK B SEGMENT Meaning A return code from H_SGLOCK is given Action SIZE is smaller than the locked memory needed or the problem must be reported to Technical Support UNABLE TO CHANGE SEGMENT SIZE Meaning The main segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE is given Generally caused by the SIZE parameter JCL SRTDEF UNABLE TO GET SEMAPHORES Meaning Linkage problem insufficient semaphore pool Could be caused by nested sorts UNABLE TO CHANGE SEGMENT SIZE Meaning The node segment used for sorting cannot be adjusted to the desired size A return code from H_SGSIZE
601. ter or a digit The maximum length is 31 characters 28 3 Messages and Return Codes Directory MAC13 MAC14 MAC15 28 4 NAME NAME Result Processing of the current unit stops Processing of the next unit if any starts Action Check the source file It can be reformatted with the MAINTAIN LIBRARY command MOVE or RENAME TOO LONG gt 31 unit_name TRUNCATED TO trunc_unit_name Meaning The name of the source or the name of the listing unit derived from the source name by adding J has more than 31 characters Result In the first case the processing of the current unit stops Processing of the next unit if any starts In the second case the name of the listing unit is composed from the source name truncated to 29 characters followed by _J Processing continues Action Check the source file It can be reformatted with the MAINTAIN LIBRARY command MOVE or RENAME IN RECORD 101 NOT EQ MEMBER NAME input_unit_name VS input_member_name Meaning The name of the source as read from the SSF source unit header is different from the name of the member as read from the library directory Result Processing continues using the name from the library directory Action Check the source file It can be reformatted using the MAINTAIN LIBRARY command MOVE or RENAME STORE NOT AVAILABLE store file efn RC edited return_code Meaning The STORE library cannot be opened the return code in
602. than the caller maximum ring number CMRN of the called procedure of the called procedure FAULT DATA DESCRIPTOR In most cases this corresponds to an unresolved reference on a procedure or data item at linkage time e g a procedure has not been linked because it has not been found in the libraries Check the linkage report 47 A2 10UJ EX Messages 15 0 DECIMAL DATA OVERFLOW The result of a decimal operation is beyond the range represented in the result field 15 1 DECIMAL DIVIDE The divisor is equal to zero in a decimal division 16 0 FLOATING POINT DATA OVERFLOW The characteristic of the result is greater than 127 in a floating point operation 16 1 FLOATING POINT DATA UNDERFLOW The characteristic of the result is negative in a floating point operation 16 2 FLOATING POINT DIVIDE The divisor is equal to zero in floating point operation 17 0 FIXED POINT DATA OVERFLOW The result of a fixed point operation is beyond the range represented in the result field 17 1 FIXED POINT DIVIDE The divisor is equal to zero in fixed point division 17 2 SUBSCRIPT OUT OF ARRAY RANGE Attempt to access data outside the upper or lower limits of a table 47 A2 10UJ 16 5 Messages and Return Codes Directory 16 6 47 A2 10UJ 17 FP Messages General Environment FP messages are produced by the File Preparation component of the system that is responsible for file op
603. the JCL statement WRITER For more details refer to the JCL User s Guide OVERFLOW ON OUTPUT WRITER CONTROL STRUCTURES Meaning The maximum number of outputs known by the output writer for a job has been reached The present limit is 256 This message may appear when a step uses a public SYS OUT file and OPENS it the first time in output and then performs several OPENs in APPEND Although the file is viewed by the user as a single output a new output from the system internal point of view is created each time the file is opened Result An abnormal return code is returned to the program as a result of the OPEN operation Action Check the program 47 A2 10UJ OU Messages O0U31 ERROR IN OUTPUT STATEMENT wrong parameter Meaning An incorrect output description parameter has been found in the case when the output description is given in the program itself instead of in the JCL This message may indicate a system error Result The output description is ignored Action Contact the Service Center if necessary BEGINNING 0U32 OUTPUT WILL BE RESTARTED FROM CURRENT ADDRESS BACK nn Meaning This message may appear only in the JOR of the WRITER service job It gives a trace of the operator s reply to question OU02 Refer to the System Operator s Guide 0U34 UNABLE TO ACCESS STATION station name RC edited return code MAIN STATION ASSUMED Meaning An output was to be directed to a remote station but
604. the authorized limit Timer not available Timer access violation VIP time out input data correct VIP time out input data error VIP time out no input data Request has occurred too late The server is not active The state of the server is no longer compatible with the requested function Disconnection without reply to a pending question The submitter of the question is aborted Type unknown Record type unknown not declared at preallocation time 1 The step to journalize has an unknown type 2 The file being opened is of an unknown type Send the PRLOG log to the Service Center The referenced message key or subkey does not exist in the catalog No message will be sent to the console Correct the key or subkey or add a new message to the catalog 54 23 Messages and Return Codes Directory TQOV 1235 TRBSYIDC 1E11 TRBSYIDE 1E12 TRBSYNID 1E10 TREGERR 1815 TRNMERR 1871 Catalog Management CATLIST Temporary quota exceeded for the project Terminal busy input data correct Terminal busy input data error Terminal busy no input data T register error Tree name error The star convention is illegal in the FROM parameter Check and modify the parameter UNCAT The cataloged object name does not follow the catalog standard naming conventions Check object name against catalog standard The specified station name does not follow catalog naming conventions TRUNC 0600 Truncating has occurred in
605. the listing created by the compilation Note that the name of the member is derived from the procedure name by adding the _L suffix The reason is indicated by the return code Result The listing will be stored in the standard SYSOUT and will be deleted after being printed Action Report the problem to the Service Center PASO8 CLOSES INLIB FOR member name RC edited return code Meaning An incident occurred at the end of source program reading The reason is indicated by the return code Such an incident is very unusual and may be due to a system error Result Compilation of the source program continues Action Check the compilation was correctly performed and report the problem to the Service Center PAS09 CLOSES FOR proc name_L RC edited return code Meaning An incident occurred at the end of creation of the listing in the print library The reason is indicated by the return code Such an incident is very unusual and may be due to a system error Note that the name of the member is derived from the procedure name by adding the _L suffix Result The listing may be accessible from the print library At the time of the incident the CU had already been produced assuming that no serious errors were detected in the source program Action Report the problem to the Service Center PAS11 CLOSE CULIB RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to CLOSE
606. the number of pools that were open simultaneously 47 A2 10UJ 47 A2 10UJ DUF Messages SEGCR and SEGDL represent the total number of calls to the segment creation and segment deletion primitive respectively SEGCR includes the control structure segments created when the step was opened which are never deleted READIOCT and WRITEIOCT represent the total number of read and write I O operations respectively 13 5 Messages and Return Codes Directory 13 6 47 A2 10UJ Dvol Dvo2 47 A2 10UJ 14 DV Messages General Environment DV messages are produced by the system component that manages peripheral devices Pertinent Manuals ICL Reference Mantal c cccccccccccccccsseccecscetececutecessceseceneeeeseenseenseecseessseesaes 47 A2 IIUJ ICE User s Guide iin rraio a E a a E ade EE 47 A2 12UJ Message Descriptions MEDIA volname IS ALREADY REQUESTED Meaning A duplicate request in exclusive mode has been made for the named volume Result The error is usually detected at step initiation time the step cannot be started Action Correct the JCL MEDIA volname HAS BEEN DECLARED UNAVAILABLE BY THE OPERATOR Meaning The indicated volume cannot be used by the step and the operator issued a Cancel Request command either as a response to a mounting request for the volume at step initiation time or to a recover request for the volume during step execution Th
607. the return code SITE CATALOG NOT FOUND ON RESIDENT Meaning This message occurs at system initialization time when initialization of the catalog tables has failed The reason for the failure is indicated by the return code 5 3 Messages and Return Codes Directory 47 A2 10UJ 6 CK Messages General Environment CK messages are produced by the Checkpoint Restart component of the system when an abnormal situation is detected at checkpoint time or when the step is restarted If the problem is caused by a user error an explanation of the error is given in the message text In the other cases system error an error code indicates the reason for the error Pertinent manuals IGE Users Guideen anana r bav sea ssa ek eee ash vec chads E N 47 A2 12UJ GCOS 7 System Administrator s Manual no a 47 A2 54US Message descriptions CK01 00 DEBUG OPTION CHKPT DENIED Meaning The checkpoint mechanism cannot be used simultaneously with the Program Checkout Facility Result Execution proceeds but the checkpoint mechanism is inhibited CK01 01 STEP IS MULTIPROCESS CHKPT DENIED Meaning The checkpoint mechanism can be used only with mono task steps Result Execution proceeds but the checkpoint mechanism is inhibited CK01 02 INTERNAL ISD S CHKPT DENIED Meaning The step uses system mechanisms that are incompatible with checkpoint Result Execution proceeds but the checkpoint mechanism i
608. the station is not accessible This may arise when a remote station has been deleted between the time when the job has been entered in the system and the time when the output is sent to the remote station Such a message may indicate a system error Result The output will be directed to the central site Action Contact the Service Center if necessary 47 A2 10UJ 30 3 Messages and Return Codes Directory 30 4 47 A2 10UJ 31 PAS Messages General Environment PAS messages are produced by the PASCAL Compiler The message PASOO gives information messages PASO1 to PAS44 indicate that an incident occurred during the compilation Pertinent Manuals PASCAL US 6S Guid evi wstecnc eS iinn ak Miata La aden teks et 47 A2 52UL Message Descriptions PASOO uu nn SUMMARY FOR program name lt error summary gt NO CU PRODUCED PASO1 OPEN 47 A2 10UJ Meaning Information message displayed for each external procedure compiled by the activation of the PASCAL compiler The message indicates e the version of the compiler uu nn e the name of the compiled program e the summary of detected errors i e the number of errors for each relevant severity level or the phrase NO ERRORS and whether or not a CU was produced PRTLIB LISTING WILL BE ON SYSOUT RC edited return code Meaning The PASCAL compiler failed to open the permanent report file for the reason indicated by the return code T
609. the system is shut down Either try to copy the file affected and try the job again or if it is not possible to copy the file preallocate a new file re initialize the system re generate the network and try the job again Some limits have been exceeded Refer to the documentation and run the NETGEN utility Contact the Service Center Termination semaphore count overflow Check the program for wait on I O termination or semaphore maximum count The maximum level that a file can be shared 255 has been exhausted The file cannot be opened Semaphore count overflow operation not performed The maximum number of files is open and is causing overflow Decrease the number of files according to the limits for VEFAS EXTENDED 200 per step 600 for the whole system Error in channel program Channel program error Contact the Service Center 1 It was not possible to open an RWI session 2 A read write error on a journal block Send the PRLOG log to the Service Center A channel program error or hardware malfunction has occurred Try again If the same condition occurs call the Service Center Invalid channel program name Channel program error Contact the Service Center 51 29 Messages and Return Codes Directory CPOV 1203 Channel program overflow BFAS Sequential OPEN Channel program overflow Disk MCS An internal error has occurred while trying to start multiple channel programs simultaneousl
610. ther a sharable module is not available because there is more than one module with an STN equal to E or the sharable module to be attached has been disconnected In the first case relink the sharable module with a switchable STN In the second case modify the user code Error in sending area Input locations not accessible Create or modify them 47 A2 10UJ SNDVIOL SORTERR SPACELIM 47 A2 10UJ DMU FORMS OMH Services System Nucleus 1441 MCS OMH TDS 1892 SORT MERGE SEND Message Management Time and Date Handling VMM SEND Command Management SEND System Interface With Initiation or COBOL SORT 002E File Management Completion of SORT Process Transfer of Record to Sort File RELEASE File Storage and Tape Handling System Disk RESNAV to YETALLOC Return Codes The DSL is too big Reduce the number of commands The selection vector does not match an active form Check that the selection vector corresponds to an active form First character is X FF EOM Wrong time or date value has been specified to be translated There is an error in the argument of a primitive The argument provided is out of bounds or an error occurred when accessing the argument or the object given as an argument is in a state which does not allow the requested action Send violation Error in SEND no data transferred Correct program An unauthorized command ha
611. ties PASCAL Compiler Patch Insertion Program Checkout Facility Hardware Error Recovery Performance Log Analyzer PASCAL Run Time Package Passthrough mechanism Communication Queue Control Library Access Easy Data QUERY Remote Operating Facilities 47 A2 10UJ RDN RF RFW RR RS RT RY SB SC SCH SCN SFI SG SIP SL SLD SLU SMM SO SQ SR SS SUM SV TD TL TN TR TS TSK TW UPN UPS URI URR 47 A2 10UJ Interpreting Error Messages Read Normalized Module Remote File Access File Roll Forward Rerun Support Resource Control Remote File Access File Recovery System Base Management Communications Session Control Scheduler VPF File Scanner Save File Utility System Generation and Update Initialization Language Syntax Description System Loader for SCP ISIP List Subfile Utility Sharable Module Maintenance Validation of Unbundled Product Schema Processor IDS BFAS Sequential Files SORT MERGE Common Standard Level 2 Structure Summary CROSSREF Salvager Sort Distribution Software Delivery Tailoring Tool Translation of JCL Statements JTRA System Trace BFAS UFAS Sequential Tape File Access Task Management Generalized Terminal Writer UPSITE for UNCP Automatic Patching Facility SYS URCINIT Loading and Updating Retrieval from SYS URCINIT 2 5 Messages and Return Codes Directory The following messages are all related to
612. ting File Preparation File Patch Utility FORTRAN Run Time Package Forms Handling File Rename Utility Front End Processor Control and Management FECM File Space Management Utilities File Save and Restore Files and Volumes Handling Utilities File and Volume Physical Handling File Transfer Generalized Access Control GCOS Programming Language Procedure Header Messages and Return Codes Directory IA IF II IL IN INS JAG JB JLD JOB JP KOM LD LH LK LL LTC MAC MC MCS MIK Integrated File Access Control IDS Italian File Access Method Implementors Instrumentation Initial System Load System Input Control Installation Creation Functions After Journal Generation Job Management Jobstep Loader for SCP Job Initiation and Termination Management After Journal KOM Building Loader Component Storage Management Static Linker Level Functions Software Factory LTC MACPROC Macro Processor Message Control System Message Catalog Generator Microform Building JCL Tables Generation Merge Utility Monitor for the Transaction Driven System MU and MV from GCOS 7 V6 Monitor for the Transaction Driven System Monitor for the Transaction Driven System Interactive Debugging Aid internal use only Network Administration Network Administration Storage Facility Network Generation Operator Message Handler OMH SYSOUT Component Output Processing Output Writer Utili
613. tion OPEN REJECTED FOR efn USER FILE PROTECTED BY jasnamel JAS STEP ALREADY CONNECTED TO SWITCHABLE jasname2 JAS 01 jasname1l JAS IS NOT STARTED 02 STEP ALREADY CONNECTED TO HA jasname2 JAS 03 STEP IS WORKING ON SYS JAS 04 TDS IS NOT CONNECTED TO THIS JAS 05 Meaning An attempt has been made to open the user file efn when one of the rules for using the JAS is not respected 01 The step is connected to a switchable JAS Only files protected by this JAS may be opened The step may only successfully open the efn protected by the switchable JAS jasnamel when JAS jasname2 becomes unswitchable 02 JAS jasnamel must be started before the step can open the user file 03 The step is connected to BLUE JAS and tries to use a file protected by GREEN JAS or vice versa The user file must be protected by the same JAS as that to which the step is connected 04 The step uses files protected by SYS JAS and now attempts to open a file protected by switchable JAS jasname1 The step may only successfully open the efn protected by the JAS jasnamel when this JAS becomes unswitchable 05 TDS tries to open a user file protected by JAS jasnamel whereas it was declared at CRCXGEN as protected by another JAS Action Ensure the above conditions are satisfied 24 5 Messages and Return Codes Directory JP52 JP53 JP53 24 6 OPEN REJECTED FOR efn USER FILE BECAUSE ITS CATALOG FILE is not catalog
614. tion Unit Record Driver Diskette WRONGDAT 1DCO 1DFF WRONGDV 1C0C UFAS BFAS Tape WRONGITM 0440 PUT OPEN DELETE READ RESNAV to YETALLOC Return Codes Device in write protect state The part of the file for which the transfer was not performed is on a device for which write operations are temporarily forbidden A UFAS salvaging is tried at OPEN time on this file but access is READ The first job using this file must be with ACCESS WRITE As above volume protected Wrong data sent to unit records Wrong device File addressing mechanism used is not supported for tape files At least one item of the output is wrong Catalog Management CATALOG FORMS GTWriter Queued Files WRONGMD 1C1B RBF WRONGORG 1C02 47 A2 10UJ BUILD Access Method DPS 6 OPEN The efn assigned to the ifn is not cataloged Catalog the file The contents of the form are invalid Check that the form is valid for the current device and has not been corrupted Contact the Service Center There is an inconsistency in the GTWriter tables GTWriter aborts NAME option start name not found in directory or there is an error in at least one entry NAMELIST option at least one entry name not found in directory or there is an error in at least one entry Unexpected status received from VCAM Wrong reference mode LOCATE mode not allowed Wrong file organization COBOL Status Key status 9P 54 33
615. tion Map is rebuilt Action None SUBFILE DELETION COMPLETED Meaning A subfile was not completely deleted File Salvaging has completed the deletion 35 17 Messages and Return Codes Directory QL62 QL63 QL64 QL65 QL68 QL69 35 18 Result The entry has been deleted as expected Action None CHANGE NAME ACTIVATED PREVIOUS STATE RESTORED Meaning ARENAME function was interrupted The file has been restored to the previous state Result The RENAME was not performed Action Perform the RENAME operation again CHANGE NAME ALIAS STATE RESET Meaning An interrupted RENAME function on an alias entry has been detected Result The function is completed Action None CHANGE NAME FUNCTION COMPLETED BUT LOGICAL TRACKS MAY BE LOST Meaning An interrupted RENAME function has been detected The directory has been updated but data blocks were lost Result Some file space has been lost Action Perform a MAINTAIN FILE with the RECOVER command CHANGE NAME FUNCTION COMPLETED Meaning An interrupted RENAME function on a MAIN entry was detected Result The function is completed Action None DELETED ALIAS ES WITHOUT MAIN Meaning Some aliases have been found without a corresponding MAIN entry Result These entries are deleted Action None ALIAS ENTRY HAS BEEN INSERTED IN A CHAIN Meaning An interrupted STOW ADD ALIAS function was detected Result The function is completed
616. to TEMP so that the required temporary file space becomes available The result of this action depends on the size of the temporary file that the system is trying to allocate and the amount of space on the resident disks that are not NTEMP Type I R Destination Generic Specific FOR TEMPORARY SPACE CANCEL OR WAIT DEFAULT Meaning The operator has issued a break command BRK after receiving an LH02 or LH06 message This message is sent during IOF sessions only Action Reply WAIT W wait w or nothing to carry on waiting for temporary space Reply CANCEL CAN C cancel can or c to cancel the job Type R Destination Specific user 27 1 Messages and Return Codes Directory LHO5 SPACE MANAGEMENT ACTION FORBIDDEN ON volnm VOLUME IS BEING REFILLED Meaning File allocation or deallocation has been attempted on the mirrored pair volnm while it is being refilled This is not allowed Action Wait until refilling is competed and then restart the allocation deallocation Type R Destination Specific user LHO6 ron WAITS FOR TEMPORARY FILESPACE ON VOLSET volsetnm Meaning The job is waiting for temporary file space on volsetnm Action Wait for temporary file space to become available or issue a break command BRK to display the LH04 message see above Type I R Destination Generic Specific LHO7 ron WAITS FOR PERMANENT FILE SPACE ON VOLSET volsetnm Meaning The job
617. tory Contact the Service Center Number of EPTs exceeds maximum allowed in XEPT 100 Overflow of the directory port of a queued file Label space overflow Label extension Data transfer logical path inhibited Server shutdown in progress The memory assigned to the buffer pool is deallocated Refer to dump Logical data path from queue to terminal inhibited action completed data transferred to queue Logical data path from terminal to queue inhibited no data received Negative argument or zero ARG almost negative integer Function undefined ARG less than 150 underflow Argument is less than zero log undefined The logarithm function argument is negative The result is undefined double precision 52 5 Messages and Return Codes Directory DLOGZR 1A06 Mathematical Package DLVIOL 1445 DMODZR 1A10 DMBXNOP 0A22 DMBXSAT 0A32 DMBXUNKN 102F DMCSVIOL 1630 163F DNODNOP 0A21 Network Control Remote File Access DNODSAT 0A31 DNODUNKN 102E DNSPEC 1030 IOF TDS DONE 0000 Any Component 52 6 Argument is zero log undefined The logarithm function argument is zero The result is undefined double precision Mailphore deletion violation Second ARG is zero Destination mailbox not operable Destination mailbox saturated Destination mailbox unknown Data Management control structures access violation Destination node not operable Modify Working Site Failure to connect
618. turn Codes Directory 52 38 47 A2 10UJ 53 IONOP to RESIDENT Return Codes This section lists the IONOP to RESIDENT return codes in alphabetical order of the return code s name mnemonic code Each return code is presented with its name associated hexadecimal value and a generic explanation of its meaning The line following that gives the associated COBOL Status Key value if it exists Here is how this section presents the return codes RETURN CODE Hexadecimal value Generic explanation COBOL Status Key value If a return code is explained in more detail for a particular system component this information is given after the generic explanation There are three columns of information as follows System Component Operation Explanation or Cause The first column System Component gives the name of a system component or utility program from which a return code may have originated for example TDS File Management Unit Record Driver BFAS Sequential Disk File Handling If you want more information about a particular part of the system consult the appropriate user s manual In general the user cannot directly access entries marked internal or system The second column Operation contains entries for the operation e g COBOL verbs Transaction Processing Routine commands performed within the corresponding system component of the first column The third column gives an explanation of the return code and recomm
619. turn Codes Listed in Numerical Order Entity found but out of allowed domain CU already active Security violation Send violation Receive violation Initialize violation Mailphore modification violation Mailphore deletion violation List Quota violation Sharing violations Device violation Sharing level violation Processing mode violation Incompatibility between user PMDs Sharing control violation Lock protocol violation Address violation Call violation Read violation Write violation File violation Access rights violation Overriding rules violation Incorrect access to a subcatalog IFN violation IFN string already used Ring violation Event management ring violation Notify ring violation Parameter not allowed because of the primitive ring issued Check ring violation Abort violation Unblock violation Function mask file mask violation Attempt to access an unassigned resource SYSADMIN identification violation Data management control structures access violation Invalid access to an FECB IFN not in open volume state Forbidden action Job entry forbidden Input device forbidden Device identification forbidden Space extension forbidden 55 11 Messages and Return Codes Directory 55 12 1705 1706 1707 1708 1709 170A 170B 1710 171F 1711 1712 1713 1714 1730 1800 IBFF 1801 1802 1803 1804 1805 1806 1807 1808 1809 180A 180B 180C 180D 180E 180F 1810 1811 1812 1813 1814
620. ueues of TCOM 07 KNODET 08 Journal 09 KJOB 10 SYS JADIR 11 SYS FTU 12 event not related to file xx Meaning 02 pb in h_open h_sysop 03 pb in h_close h_syscl 06 pb in h_syspnt 07 pb in h_get h_sysget 08 file that should be present is not found 09 H_SYSBDL error 10 before journal 11 when nn 08 then After Journal error when nn 08 then H_SYSPUT error 12 MAM 14 crash while processing the job during a previous WARM RESTART 47 A2 10UJ 37 1 Messages and Return Codes Directory Meaning An error has occurred during a WARM RESTART Result System error Action Contact the Service Center 37 2 47 A2 10UJ 38 RT Messages General Environment RT messages are produced by the RemoTe File Access protocol Pertinent Manuals Unified File Transfer User s Guide annene 47 A2 13UC Distributed Job Processing User s Guide c ccccccccccsceseeteeseereeteenteeneeeees 47 A2 14UC Message Description The Remote File Access protocol generates two kinds of messages e messages that inform users without the words WARNING or FATAL in the left hand margin e messages about problems with the words WARNING or FATAL in the left hand margin Remote File Access messages begin with the prefix RT as in the following example RT 204 CONNECT CANNOT GET A SEMAPHORE Remote File Access messages are self explanatory therefore they are not listed in this manual 47
621. ult If several compilations were required the compiler proceeds with the next member Action Correct the JCL GET INLIB FOR member name RC edited return code Meaning The compiler was unable to read a source record either from a user library or from the standard SYS IN library the reason is given by the return code Such an incident is very unusual and may indicate a system error Result Compiling stops Action If the incident was an I O error check the disk drive and the disk pack supporting the file Contact the Service Center if necessary 20 11 Messages and Return Codes Directory GPL38 SOURCE MEMBER1 member name NOT IN SSF FORMAT Meaning The source given in the input to the compiler is not in SSF format the compiler cannot process the input This error may occur when an input enclosure is used and no TYPE parameter is specified in the INPUT JCL statement In this case the system assumes TYPE DATA Result Compiling stops Action If the source was in an input enclosure use TYPE DATASSF or TYPE GPL in the INPUT JCL statement If the source was in a permanent library use LIBMAINT to create a member in SSF format GPL39 SOURCE MEMBER member name IS NOT IN GPL LANGUAGE Meaning This is a warning message The source member given as input to the compiler has neither TYPE DATASSF nor TYPE GPL Result The compiler proceeds this may produce strange results if the GPL compiles JCL commands o
622. ume Result The compiler continues processing but it will not generate any Compile Units Action Correct the JCL if relevant or contact the Service Center GPL K5 ERROR WHEN PROCESSING SOURCE LIST BUILD RC edited return code Meaning A problem occurred when the compiler attempted to retrieve source member names from the input library The reason is indicated by the return code Result No further compilation is performed Action Report the problem to the Service Center GPL K6 ERROR WHEN OPENING INLIB SUBFILE member name OPENS RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to access a source member from the input library The reason is indicated by the return code The most common return code is SFUNKN which means that the member does not exist Result The compilation is aborted Action Report the problem to the Service Center GPL K7 ERROR WHEN OPENING PRTLIB SUBFILE proc name_L OPENS RC edited return code Meaning An incident which may be due to a system error occurred when the compiler attempted to create the member to receive the listing created by the compilation Note that the name of the member is derived from the procedure name by adding the _L suffix The reason is indicated by the return code Result The listing will be stored in the standard SYSOUT and will be deleted after being printed Action Report the problem to the Service C
623. un the DDLPROC or MNDD utility to respecify the physical characteristics of the schema if relevant DDM00437 lt error localization gt THE DATA BASE FILE ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name IS IN INCONSISTENT STATE Meaning A previous IDS session on the data base detected an inconsistency in the data base file specified The file cannot be accessed until the recovery procedures have been performed Result The step execution is aborted Action Examine the JOR s of previous IDS sessions to find which type of inconsistency has been detected you may run the H_DBUTILITY utility to validate and recover the data base DDM00438 lt error localization gt UNEXPECTED RETURN CODE WHEN CLOSING FILE ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name RC edited return code Meaning An abnormal condition has been detected when a DML statement FINISH refers explicitly or implicitly to the file specified The return code gives the reason for the error This message usually indicates a system error Result In a Batch environment the step execution is aborted Action Contact the Service Center 9 19 Messages and Return Codes Directory DDM00439 lt error localization gt THE DATA BASE FILE ASSIGNED TO IFN ifn SCHEMA AREA area name INDEX index name IS NOT IN INCONSISTENT STATE Meaning The RESET INCONSISTENT clause of the PATCH LABEL command of H_DBUTILITY is
624. und on the volume at volume restore Check the validity of the existing cataloged files on the output volume and destroy them if necessary 51 9 Messages and Return Codes Directory ARGERR 51 10 1853 BFAS Sequential OPEN Disk BFAS UFAS Tape Buffer Management Resource Status Catalog Management CATEXTD COBOL RTP COMPUTE ACCEPT ASSIGN OPEN DMU CREATE PRINT COMPARE FILD ESC FILDUPLI VOLCONTS VOLPREP Dump Analyzer File and Device Save and Restore Management System Disk File Space Management Utilities FORMS GAC EXTENDED General GCL GTWriter IOF Argument error Inconsistent block size Correct program or JCL Parameter checking has failed Refer to dump An invalid parameter has been specified the record type specified by RECTYPE is incorrect or the number of objects given exceeds the catalog capacity lt 10 000 objects Exponentiation used on a negative number with functional exponent Input string incorrect Related file literal incorrect Errors in option string or inconsistent or illegal define or assign parameters Error in command language A specified argument is incorrect Begin again with the correct arguments The input files output files or media are incorrect for one of the following reasons dummy files wrong record size for save files device class incorrect or not supported input or output file organization incorrect Check file ch
625. unit contains errors but the expanded member is available but the expanded member is available Processing of the next unit if any starts Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center SYSOUT RC edited_return_code Meaning MACPROC was unable to open the standard SYSOUT file in order to create the report The return code indicates the reason Such an incident is very unusual and may be due to a system error Result Processing stops No unit is processed Action If the incident is an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center PRTFILE RC edited_return_code Meaning MACPROC was unable to open the report file specified by the PRTFILE parameter The return code indicates the reason The most frequent cases are e Return Code EFNUNKN the specified file has not been found e Return Code UNRECIO the disk pack or drive supporting the file may be damaged Result Processing stops No unit is processed Action Correct the JCL if relevant or contact the Service Center 47 A2 10UJ MAC31 MAC32 MAC33 MAC34 MAC35 47 A2 10UJ MAC Messages OPEN PRTLIB RC edited_return_code Meaning MACPROC was unable to open the report library specified by the PRTLIB parameter The return code indicates the reason The most frequent cases are
626. ure error Verify file name or clear file area to continue System trace collector file second record read error System trace collector file highest logical address record header error Verify file name or clear file area to continue Incorrect record sequence numbers in system trace collector file Verify file name or clear file area to continue Incorrect record sequence numbers in system trace collector file Verify file name or clear file area to continue System trace collector file control record structure error Verify file name or clear file area to continue System trace collector file control record structure error Verify file name or clear file area to continue 47 A2 10UJ 4012 37 38 4012 39 40 4012 41 42 4012 43 44 4012 45 46 4012 47 48 4012 49 50 4012 51 52 4012 53 54 4012 55 56 4012 57 58 h_get RC OBJTPERR h_get RC h_get RC OBJTPERR h_get RC OBJTPERR OBJTPERR RECNFD OBJTPERR h_get RC TR Messages System trace collector file highest logical address read error Verify file name or clear file area to continue System trace collector file control record structure error Verify file name or clear file area to continue Unexpected RC for system trace collector file read out of defined address space Verify file name or clear file area to continue System trace collector file first record read error System trace collector file structur
627. uring the compilation Pertinent Manuals GPL System Primitives cccccccccccccsceesseceeeeeccceceeseceeseeseeeeecsaeeesseeeneneenas 47 A2 34UL GPL Reference Manual 0 ccccccccccccccccccscecsecesecssee see seensesuseeneeeseeenesesessaes 47 A2 35UL GPL Users Guid rae oT E pA RA eae ees ED 47 A2 36UL Message Descriptions GPLOO uu nn SUMMARY FOR program name lt error summary gt NO CU PRODUCED Meaning Information message displayed for each external procedure compiled by the activation of the GPL compiler The message indicates e the version of the compiler uu nn e the name of the compiled program e the summary of detected errors i e the number of errors for each relevant severity level or the phrase NO ERRORS and whether or not a CU was produced 47 A2 10UJ 20 1 Messages and Return Codes Directory GPL K1 ERROR WHEN OPENING THE PRTLIB RC edited return code Meaning The GPL compiler failed to OPEN the permanent report file for the reason indicated by the return code The most common user error is RC EFNUNKN the report file specified has not been found on the indicated volume Result The compiler proceeds but the listing is produced in the standard SYSOUT The listing will be deleted after being printed Action Correct the JCL if relevant or contact the Service Center GPL K2 ERROR WHEN OPENING THE PRTFILE RC edited return code Meaning The GPL compiler failed to OPEN the permanent rep
628. urred when the compiler attempted to close the report file or the library specified in the PRTLIB parameter of the JCL or a sequential file specified in the PRTFILE parameter of the JCL The return code gives the reason for the incident The incident may be due to a system problem Result Refer to the preceding message Action Refer to the preceding message PUT ON SYSOUT RC edited return code Meaning The compiler was unable to write a record in the standard SYSOUT containing the report The reason is indicated by the return code Such an incident is very unusual and may indicate a system error Result Compiling stops The CU generation phase of the program being processed had already been performed Message PASOO in the JOR indicates which CUs were already produced A partial listing of the program being processed may be accessible 47 A2 10UJ PAS Messages Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center PAS15 PUT ON PRTLIB RC edited return code Meaning The compiler was unable to write a record in the report file or to a library specified in the PRTLIB parameter or a sequential file specified in the PRTFILE parameter The return code indicates the reason for the incident The return code DATALIM means that the file or library is full and cannot be extended Remember that e the PRTFILE is processed in ap
629. used by the LIBMAINT processor Action None CBL20 USETST RC edited return code AT ADDRESS address Meaning The run time routine H_CBL_USETST was called to set the step termination status but the operation failed for reasons indicated by the return code The return code is usually INDOUT which indicates that the status value given was negative 47 A2 10UJ 47 A2 10UJ CBL Messages Result The step termination status is not set but execution proceeds Action Correct the program CBL23 IFN ifn DATAFORM OVERRIDING NOT TAKEN INTO ACCOUNT Meaning A DATAFORM parameter was specified in a DEFINE JCL statement for the file indicated but overriding the data format is not possible using the DEFINE JCL statement for a user program Result Execution proceeds on the file with the data format specified in the program Action The program must be corrected if the data format specified in the program is not suitable CBL24 IFN ifn DESCRIBED IN PROGRAM as is not matched with one described as Meaning The same file name ifn is defined in two or more programs of the run unit These file descriptions in the programs are not identical This is prohibited by the standard Result Execution aborts Action Check and correct the file descriptions in the programs CBL25 IFN ifn ERRONEOUS ATTRIBUTES SEE creating program attribute attribute in creating program attribute Meaning A prog
630. using one of the procedures RESET REWRITE or FUPDATE File not open Contact the Service Center System has not taken output request into account refer to JOR for reason Attempt to access a file that is already closed Re open the file with the OPEN _TDS_ FILE Master Command Subfile not open COBOL Status Key value 30 Any Except OPEN Library subfile not open May occur when an attempt is made to write to standard SYSOUT if there was no printer assignment in the COBOL program PRINTER or SYSOUT 53 19 Messages and Return Codes Directory NOTOPENV 1632 Assignment of File Volume File Management IFN not in open volume state System difficulty in volume switching Notify ring violation Answer to a test request is negative Process not yet terminated When a file is closed the number of opens has been decremented but has not yet reached zero Contact the Service Center Update not allowed File is in compacted form and the modified record was not loaded in pseudo compact form Internal consistency check failed Step aborted On a file with the COMPACT attribute the record after pseudo compaction is not the same length as before This means that this record was not originally written to the subfile with COMPACT N Synchronization should have occurred before that service was requested COBOL Status Key value 30 or Device NOTVIOL 1617 NOTYET 0013 GPL Waiting for End
631. ust be performed in the following order first deallocate space using the DEALLOC utility then remove the catalog entry using the UNCAT utility NOTE Both operations can be performed at the same time using the UNCATNOW keyword of the DEALLOC utility e Ifthe operation requested was to transform a file from cataloged to uncataloged the utility FILMODIF should have been used Result The utility is not performed Action Either check for the correct sequence of DEALLOC and UNCAT or ensure that FILMODIF has been used DCT102 object name DIRECTORY REMAINS CATALOGUED DEPENDENT NODES EXIST Meaning The deletion of a directory entry in the catalog UNCAT utility has been requested but some valid files file links and or directories exist in the directory Result The utility is not performed Action Use CATLIST to list the catalog contents then delete all the dependent nodes if relevant DCT103 object name FILE LINK NAME SYNTAX ERROR Meaning A file link name specified in a parameter of the utility does not follow the catalog naming rules e g a simple name is greater than 16 characters Result The utility is not performed Action Check the file link name 8 14 47 A2 10UJ DCT104 DCT106 DCT118 47 A2 10UJ DCT Messages object name FILE LINK ACCESS RIGHT VIOLATION Meaning The project does not have sufficient access rights to perform the operation on the specified file link e g at
632. ut of NV scope For a not ALONE MIRROR volume both copies are STANDBY or in AVR or one is STANDBY or in AVR and the other is unknown System error or an unused entry has been found while scanning the system tables to obtain information about media Value out of range or unused due to MIRROR disk pairing System error or an unused entry has been found while scanning the system tables to obtain links between volumes and devices Value out of range or unused due to MIRROR disk pairing Normal return code One or several media requested by a step are not yet mounted A step cannot be started because the requested media has been declared unavailable by the operator 56 3 Messages and Return Codes Directory 56 4 DVMGT 16 ARGERR DVMGT 18 BREAK DVMGT 18 CONFLICT DVMGT 18 DVNASG System error The given function code is not allowed for the given device class The mounting or write permission check request has been cancelled by a break or a CANCEL response Contradictory requests The request for write permission cannot be executed because access protection was requested during allocation of the volume System error while executing a mounting or write permission check request The media is not assigned to this user Value out of range or unused due to MIRROR disk pairing DVMGT 18 HARDMALF The given media cannot be mounted or switched to DVMGT 18 MDNAV DVMGT 18 RESN
633. valid Assign another tape volume The catalog file is still valid A valid file still exists or the catalog file has not expired File still valid The file cannot be deallocated because the expiration date has not yet been reached Try the deallocation again with the BYPASS option If the file is not multi volume perform VOLPREP with the BYPASS option before opening the output 47 A2 10UJ NOTOPEN NOTOPENS 47 A2 10UJ 1c01 Any File Organization or TDS Buffer Management Resource Status COBOL RTP GAC and GAC EXTENDED GTWriter Job Management Journalization OMH PASCAL RTP System Nucleus System Output TDS 1c03 Library IONOP to RESIDENT Return Codes File not open COBOL Status Key value 96 Any Except OPEN The file is not open Perform OPEN in the Mailphore System Compound Messages VMM WRITER program The telecom server buffer pool has not been allocated or initialized Contact the Service Center Inconsistency between the program object code or the system data and the COBOL RTP Contact the Service Center The specified file is not open The file SYS TW OUT or SITEOUT has not been opened Mailphore not open At rerun there was an overflow at the opening of user files so the CLOSE DEASSIGN of all user files could not take place Closed without having been opened An attempt has been made to access a file which is not open Open the file
634. ven in the file definition Verify and modify the allocation parameters of the log file concerned SYS ERLOG SYS LOGC or SYS LOGF 47 A2 10UJ File Organizations Other Than UFAS GCL IOF Job Management OMH RBF Services SORT MERGE READ WRITE JSTART UPUT EPBH ECTM Step Initiation Command Processing Message Processing Access Method L6 Tabulation Handling System Interface With Transfer of COBOL SORT System Nucleus System Output TDS UFAS and UFAS EXTENDED Unit Record Driver Diskette Record to Sort File RELEASE VMM WRITE Any TPR Operation WRITE PUT OPEN IONOP to RESIDENT Return Codes Inconsistent or invalid parameters e g block or record length Correct program or JCL The length specified as a command parameter is not acceptable and must be modified Page or line length exceeds the maximum size during GCL READ or GCL WRITE Incorrect size specified for a buffer CLI error Multiblock command too large The length of the output message text is too long or is less than or equal to zero The length of the buffer provided for the reply is less than or equal to zero Record size incorrectly specified or greater than allowed maximum Length of input or output string not between 1 and 256 1 TRID14 17 26 The input record length is too short for the key arrange sum include omit fields or longer than the declared maximum length Co
635. ves the message The TWCOMMSUB NOTE H_TWCOMM is aborted TW41 COMMAND HANDLER ALREADY RUNNING Meaning H_TWCOMM has already been started Who receives the message The TWCOMMSUB TW42 RTO FROM BEG IS MANDATORY FOR NIP3 Meaning Only the FROM BEG parameter of the RTO command is allowed for a PRT1262 Who receives the message The COMMANDSUB submitter of the command TW43 lt term gt NOT READY PTEST NOT PERFORMED Meaning GT Writer cannot connect the terminal in order to do a printing test The request is disregarded Who receives the message The OWNER TW44 ILLEGAL OPTION FOR H_TWCOMM LAUNCHING Meaning The H_TWCOMM launching option was not one of the following WARM warm COLD cold CLEAN clean GEN gen Who receives the message The TWCOMMSUB TW45 lt term gt CLOSED BY SYSTEM DESTINATION NODE UNKNOWN This message is followed by a TW11 message Meaning The terminal has been declared with an unknown node GTWriter closes the terminal and sets the report to the HOLD state GTWriter does not try again to connect this terminal Who receives the message The OWNER CONTROL TW45 lt term gt CLOSED BY SYSTEM DESTINATION MAILBOX UNKNOWN This message is followed by a TW11 message 46 14 47 A2 10UJ TW Messages Meaning The terminal has been declared with an identification unknown to the network GTWriter closes the terminal and sets the report to the HOLD state GTWriter
636. vided for the trace file and indicates a system error When a private file is used return codes EFNUNKN or SFUNKN usually indicate a user error the file or library member specified in the JCL statement ASSIGN does not exist on the specified volume Result In a Batch environment the step execution is aborted Action Check the corresponding JCL statement ASSIGN if it exists contact the Service Center if necessary 9 13 Messages and Return Codes Directory DDM00412 lt error localization gt UNEXPECTED RETURN CODE WHEN CLOSING IDSOPT RC edited return code Meaning An abnormal condition has been detected when closing the file containing the run time options The reason is given by the return code This message usually indicates a system error Result In Batch the step execution is aborted Action Contact the Service Center DDM00413 lt error localization gt UNEXPECTED RETURN CODE WHEN CLOSING TRACE RC edited return code Meaning An abnormal condition has been detected when closing the file which received the trace outputs The return code gives the reason for the error This message usually indicates a system error Result In Batch the step execution is aborted Action Contact the Service Center DDM00414 lt error localization gt UNEXPECTED RETURN CODE WHEN UNLOADING THE SCHEMA SUBSCHEMA RC edited return code Meaning An abnormal condition has been detected while u
637. vironment RDN messages are produced by the Read Normalized module that is common to most compilers FORTRAN COBOL PASCAL C and which is in charge of e managing the input library or file that contains the source programs to be compiled e delivering in a standard format to the various compilers all the options provided by the user in the JCL statement that activates the compiler e g FORTRAN Message RDNO1 is specific to input file or library management it may be the result of a user error Messages RDN11 to RDN20 are specific to options processing When produced they usually indicate a software problem and should be reported to the service center Messages RDN12 to RDN20 may indicate a user error when the user activated the compiler using the basic JCL instead of the SDS In that case these messages indicate an invalid format of the option string Pertinent Manuals C Language User s Guide c ccccccccccccccccscccseceseccsetsceeseeuesneenseeeneesneeenseenaes 47 A2 60UL COBOL 85 User s Guide nren aiana A aa r 47 A2 06UL FORTRAN 77 Users Guide einun ena a AN ETN NOT 47 A2 16UL PASCAL Users Guide sense na A Tu eae a lS 47 A2 51UL 47 A2 10UJ 36 1 Messages and Return Codes Directory Message Descriptions RDNO1 ERROR WHILE COMPILING LINE nnn OF program id RC edited return code ON ifn Meaning An incident occurred while processing the input library or file usually during an OPEN or READ operation
638. volume names Therefore IDS is unable to decide which library is referred to in the run time options Result In a Batch environment the step execution is aborted Action Check the JCL statements ASSIGN DDLIBi if several object schema libraries have the same efn use the ifn in the run time options to qualify the schema names DDM00399 lt error localization gt UNSUCCESSFUL CREATION OF IDS ROOT RC edited return code Meaning This message indicates a system error the reason is given by the return code Result In a Batch environment the step execution is aborted Action Contact the Service Center DDM00400 lt error localization gt SUBSCHEMA subschema name HAS NOT BEEN VALIDATED AGAINST THE SCHEMA schema name IN LIBRARY ASSIGNED TO IFN DDLIBi SUBSCHEMA VALIDATION DATE date time SCHEMA DDL REFERENCE DATE date time Meaning The Subschema validation date is not consistent with the schema DDL Reference date Action Check that the subschema validation date is the same as the schema DDL reference date if not perform the VALIDATE subschema command in the MNDD utility 9 10 47 A2 10UJ DDM Messages DDM00401 lt error localization gt NOT ENOUGH SEGMENTS AVAILABLE TO LOAD SCHEMA schema name SUBSCHEMA subschema name FROM LIBRARY ASSIGNED TO IFN DDLIBi Meaning The number of vacant segment entries reserved at linkage time is not sufficient to load the schema subschema Vacant segm
639. volume or the file level catalog entry Contact the System Administrator An attempt was made to update a file declared with READLOCK STAT in DEFINE Check READLOCK parameter Batch or MESSAGE statement TDS The user attempted to execute a pre initialized load module without having the execute right at their module An access right violation has occurred The user tried to call a function not allowed in the caller s ring or the user tried to access a file whose protection ring is too small Check the file s access rights Illegal file access Channel program access rights violation 51 13 Messages and Return Codes Directory System Nucleus TDS ASGERR 1864 File Management System Nucleus AUPI 0301 037F BADOWNER 1C12 Catalog BAMERR 186E Queued Files System Output BAMOV 1220 Queued Files 51 14 Cancel Channel Program Execution Request Channel Program Deletion Dynamic Addresser TPR Operation Assignment of File Volume or Device Dynamic Addresser Illegal file access Caller s ring greater than 0 The CANCEL COBOL primitive was not called by a COBOL procedure Modify the user code Access rights violation Write verb requested while in statistical read Assignment is denied Exclusive access has been requested for a volume which is already assigned to a file via the ifn There is a conflict between the Segment Table Entry STE of the entry se
640. ween user PMDs Overflow would occur 53 27 Messages and Return Codes Directory OVERLOAD OVRVIOL PADDING PAGEOV PAPERR PARAMERR 53 28 0500 OSFF System Nucleus 1502 COBOL RTP 0011 1229 FORMS IDS 1 24 Unit Record Driver Printer 1800 1BFF SBR System Nucleus Loader VMM OPEN Statement Padding WRITE OPEN WRITE Parameter Collector and Analyzer VMM Center Unit Record Driver Diskette POINT Some component of the system is currently overloaded It is impossible to return enough pages to the pool Contact the Service Center Overriding rules violation An OPEN statement is executed on a file whose COBOL description contradicts the permanent file attributes declared when the file was created has occurred during a move operation Page overflow System error during page overflow Contact the Service Center Given line number exceeds the maximum permitted in a CI Paper definition error There is an inconsistency in the paper parameters Abort the step and check the paper parameters Error in a CR120 Print a warning message erroneous due to a programming error There is an error in one or more of the input commands For help in resolving the error refer to the additional information in the output library Invalid format in the input argument Internal interface error Contact the Service BEGIN argument no
641. xxxx gt UNABLE TO ASSIGN lt media gt NOT MOUNTED In this example all but the two fields Rxxxx and media are fixed These two fields are called variable fields When the message is sent they contain the name of a report and the name of a media respectively Codes Used in the Explanations Codes used to indicate who receives the message TWCOMMSUB The submitter of H TWCOMM MASTER This code is used for messages sent on GT Writer initialization When this is done at system initialization time the MASTER code signifies the MAIN operator 46 1 Messages and Return Codes Directory 46 2 SUBUSER OWNER CONTROL OWNER COMMANDSUB When a user launches H_ TWCOMM to initialize GTWriter he she becomes MASTER In IOF the submitter of DPRINT In TDS the TDS MASTER The OWNER of the terminal concerned by the command if one exists and if the CONTROL parameter has been specified in the corresponding USER generation statement Otherwise the message is sent to the SUBUSER The OWNER of the terminal if one exists Otherwise the message is not sent The person who has submitted the command Codes Used in the Variable Zones lt RxXxXxXxX gt lt dest gt lt term gt lt form gt lt code gt lt driver gt lt command gt lt user gt lt ron gt lt retcode gt lt media gt lt proc gt lt mb gt Name of the report Name of the terminal or of the pool to which the repor
642. y 28 9 Messages and Return Codes Directory MAC36 MAC37 MAC38 28 10 Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center CLOSE PRTFILE RC edited_ return_code Meaning MACPROC was unable to close the report file specified by the PRTFILE parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result This incident can only occur at the end of processing when all output units have already been produced The listings may be accessible and printed successfully Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center CLOSE PRTLIB RC edited_return_code OPEN Meaning MACPROC was unable to close the report library specified by the PRTLIB parameter The return code indicates the reason Such an incident is very unusual and may be due to a system error Result This incident can only occur at the end of processing when all output units have already been produced The listings may be accessible and printed successfully Action If the incident was an I O error check the disk drive and the disk pack supporting the file If necessary contact the Service Center OUTFILE RC edited_return_code Meaning MACPROC was unable to open the output file specified by the OUTFILE
643. y Call the Service Center Physical I O Access Various Operations Total channel program space exhausted or total Internal number of buffers exceeded Use SIZE RWI Channel program overflow CPYNAV 0409 A copy of the file is not available Any File Any I O Operation System error difficulty in disk address Organization checking Inform Service Center System Trace Extractor The extractor entry file is not the type of circular file created by the collector Compare the description of the entry file with the circular file of the collector If the files are the same reallocate or empty the circular file CQATANOV 1A78 ARG i overflow complex arctan CQATNHOV 1A7B ARG i overflow complex arctanh CQTHPREC 1A72 real ARG gt 2 100 PI complex tanh CQTNPREC 1A75 imag ARG gt 2 100 PI complex tan CSATANOV 1A76 ARG i overflow complex arctan CSATNHOV 1A79 ARG i overflow complex arctanh CSTHPREC 1A70 real ARG gt 2 19 PI complex tanh CSTNPREC 1A73 imag ARG gt 2 19 PI complex tan CVUNKN 1004 Control variable unknown 51 30 47 A2 10UJ DAMAGED 0120 File Management FORMS GAC EXTENDED and UFAS EXTENDED Job Management Journalization Network Generation OMH PCF System Nucleus TDS VMM System Output 47 A2 10UJ ABNCCAD to DATALOSS Return Codes Function not performed Some entities are damaged File Storage and Tape Handling Load Module Loader DSMGT
644. y Function CATBUILD Command Processing OMH SCATVIOL 1503 Catalog Management CATALOG CATDELET CATEXTD CATLIST MODIFY REPLACE SHIFT UNCAT Message Management OMH SCIDXNAV 0A18 UFAS and UFAS OPEN EXTENDED Indexed READ Disk Files With START Secondary keys REWRITE DELETE 54 6 ARG gt 1 underflow arctanh Subcatalog unknown on volume SITE CATALOG does not exist No operation on a catalog can be performed SYS CATALOG does not exist and an attempt has been made to use it The site catalog must exist before the creation of any private catalog Run the CATBUILD utility to create a site catalog Unable to retrieve GCL variable language or default binary library and return code of the primitives called by Data Management Incorrect access on a subcatalog The catalog rank given does not lead to a valid catalog Catalog is a dummy or catalog rank does not exist in ATTACH statement Check ATTACH statement CATALOG command and CATNAME parameter Incorrect catalog name specified Secondary index not available Secondary index has not yet been created Create it with SORTIDX 47 A2 10UJ SCIDXOBS 1888 SCOTLOW 1A25 SCOTOV 1A24 SCOTPREC 1A26 SCSHOV 1A66 SCTYVIOL 1440 SDERR 1808 Job Management System Nucleus SEEKERR 1803 SEQERR 1889 Catalog COBOL File Management FORMS Job Management 47 A2 10UJ RESNAV to YETALLOC Return Code
645. y indicates an IDS II system error The code of the error is specified in the ORG field of the error localization Result In Batch environment the step execution is aborted Action Contact the Service Center DDM00562 lt error localization gt SYSTEM INCONSISTENCY INVALID IDS ROOT REFERENCE CODE code Meaning System inconsistency there is a problem in IDSROOT Result In Batch environment the step execution is aborted Action Contact the Service Center DDM00563 lt error localization gt SYSTEM INCONSISTENCY INVALID MESSAGE INTERFACE MESSAGE KEY key code ERROR CODE error code Meaning The DBCS tried to send an error message which is not recognized by the message interface Result The step execution is aborted Action Contact the Service Center DDM00594 lt error localization gt REQUESTED USER TRACE FUNCTION NOT ALLOWED Meaning User trace not allowed Result In Batch environment the step execution is aborted Action Modify the IDS II options to enable the user trace if necessary DDM00595 lt error localization gt SYSTEM INCONSISTENCY WHEN PROCESSING USER TRACE Meaning System inconsistency during user trace execution Result In Batch environment the step execution is aborted Action Contact the Service Center 47 A2 10UJ DDM Messages DDM00691 lt error localization gt SYSTEM INCONSISTENCY DBCS INTERNAL SPACE EXHAUSTED INTERNAL LIMITS REACHED Meaning The D

to view the file - Support On Line

Contents

Download Pdf Manuals

Related Search

Related Contents