GYRO RGB LASER
Contents
1. REAR PANAL GYRO LASER 1 2 W atx GYRO SENSMIVITY oo Oe SS ara atx s AO OU FPUT INHUT Power ON OFF Switch IEC Power IN Digital display Sound sensitivity Microphone DMX OUT DMX IN Safety Key D E qtx 1O O CEC ne Risk of electric shock Item ref 152 761UK me expose to D www avsl qtx com Ax noisture or rain 152 761UK User Manual WG qtx IMPORTANT INFOMATION This product is a Class 3B laser and should only be installed and used by persons who are trained in the management of laser radiation and are able to operate in accordance within the guidance given by the Health and Safety Executive HSE in HS G 95 The Radiation Safety of Lasers used for Display purposes Copies of this guide can be downloaded from the HSE website below www hse gov uk pubns priced hsq95 pdf This product contains no user serviceable parts Under no circumstances should any attempt be made by the user to dismantle or modify it in any way INSTALLATION AND MOUNTING INSTRUCTIONS This product must be securely mounted so that its emission is always directed away from people and objects that are able to reflect the emission towards people In this regard the separation distances of 3 metres vertically and 2 5 metres horizontally cited in HS G 95 and shown overleaf must be observed 152 761UK User Manual VERTICAL BIRDS EYE VIEW Audience allowed in this zone Laser projector Balcon2. WG qtx TECHNICAL SPECIFICATION Voltage 230Vac 50 60Hz Blue 300mW 455nm Fuse 2A Slow blow DMX Channels 6 Dimensions 190 x 190 x 110mm Laser Class 3B Red Laser 100mW 638nm Power Consumption 45W Green Power 50mW 532nm Weight 2 4ka IMPORTANT NOTE This product conformed to Laser amp LED Safety standard BSEN60825 1 2007 incorporating corrigendum 2008 DISPOSAL Please dispose of the unserviceable device according to the current statutory requirement Errors and omissions excepted Copyright 2012 AVSL Group Ltd 152 761UK User Manual qtx GYRO RGB LASER Order ref 152 761UK User Manual www avsl qtx com IMPORTANT SAFETY NOTICE Please read this manual before operating VERSION 1 0 an aM group brand WG qtx E qtx 000 010 010 Blackout ae 128 192 DMX 512 Select gobo Only CH2 activated 190 255 DMX 512 Control mode all other channels activated f Laser Gobo select ONLY when CH1 in 2 vais 000 255 DMX Select ee mode rotation 000 255 _ 255 X axis rotation sid axis rotation oY ore 000 255 Y axis rotation rotation 4 Colour 126 167 Bue 255 Colour Colour display in sections si in sections 5 Section 000 255 Set multiple colours per section of the Display beam Only when CH4 255 6 Colour section length 000 255 Section show gradually become longer 152 761UK User Manual 152 761UK User Manual WG qtx DMX The fixture is equipped
3. essor and a soft brush to remove dust collected on external vents and internal components Clean all glass when fixture is cold with a mild solution to the cloth or tissue and drag dirt and grime to the outside of the lens Gently polish optical surfaces until they are free of haze and lint The cleaning of internal and external optical lenses and or mirrors must be carried out periodically to optimise light output Cleaning frequently depends on the environment in which the fixture operates damp smoky or particularly dirty surroundings can require cleaning fluid Always dry the parts carefully Clean the external optics at least every 20 days 152 761UK User Manual WG qtx VERTICAL CROSS SECTIONAL VIEW Y ye E eg pee ag ral wo ee ee Ao as ave ae ree 3 Aer Audience exclusion zone gt eS 998 n corns ae Se ee Se 7 ee us CTET aria E E gl audience n ee A E N E a en e 3m above at ics Tid be at least a O j a ee ction s oelra T Laser prose s gt 7 Laser projector A Z r Ak E j pe rah sts _ Ppa g N x E NF mM i L DA he RT Y 5 m Audience allowed AVA SINA ARR in this zone ON ics r f Audience LI Hay CO A A NWI NE Stage F DE Weg tans CAS IAIA NASS A ZH d T 9 I Use PV 7 Y pS oF 0 Y p lt sae p EEE EAEAN EEE LODARE E EE GEESE og ie e CS Mon Sloane Wes cS Ton loa ie Ses cS CIPS LD AW CS APOC A Ss CNS 152 761UK User Manual WG qtx PACKAGE CONTENTS Please check the contents to en
4. ideal addition to any lighting rig or for use in permanent installations such as nightclubs or discos Unique gobo like patterns Brighter 638nm Red laser technology 0Q 45W total laser power Red 100mW Green 50mW Blue 300mW Auto sound to light pattern select and 6 channel DMX modes Master slave mode Easy digital display to set the mode of operation Key controlled for laser safety We recommend that this product is used within the guidelines HSG95 152 761UK User Manual WG qtx AY CAUTION AY Please read this manual fully before installing or operating this product as it contains important safety information relating to its installation and operation This Class 3B A laser product emits hazardous levels of optical radiation and will cause injury to the eyes if viewed directly This product ts not suitable for projection directly at audiences or other persons This product must not be used for any form of audience scanning application and is for professional use only 152 761UK User Manual WG qtx OPERATION FOR GYRO DMX 512 eo FUNC UP DOWN ENTER Press the FUNC button to enter setup mode followed by the UP amp DOWN keys to select the mode you desire To confirm your selection press ENTER AUt Auto running random effects cycle SOU Sound activated random effects cycle rgb Colour select mode POO P19 Gobo Select 001 512 DMX address 152 761UK User Manual
5. r indoor use only and in a dry environment Do not switch on immediately Wait until the unit reaches room temperature Do not shake the device and avoid brute force when installing or operating Do not use the device during thunderstorms and please disconnect the power Do not use solvents or aggressive detergent to clean the device Use a soft and clean cloth Do not modify the device or the connected power cord without authorisation Do not stare into the aperture This product emits hazardous levels of optical radiation and will cause serious injury to the eyes if viewed at close range This product should be securely mounted so that its output emission is always directed away from people and at objects that are able to reflect emission towards people In this regard the separation distances cited in HS G 95 should be observed The symbol d mf determines the minimum distance from lighted objects The minimum distance between light output and the illuminated surface must be more than 0 5m 152 761UK User Manual
6. sure that the product has been received in good condition IEC Power Lead x 1pc Safety Keys x 2pcs If you find any accessory is missing or the product has arrived with any problems please contact your retailer at once This product contains no user serviceable parts so make no attempt to try to fix or modify this item yourself as this will invalidate the warranty We recommend you keep the original package and proof of purchase for any possible replacement or returned demand SETUP i 1 Unpack the laser ensuring all packaging and tape is removed 2 Always test the laser before fixing in a permanent location 3 4 Insert the safety key and turn to a quarter turn clockwise At this moment ensure that Connect the IEC mains plug and power up no one is exposed to laser radiation Select which mode you want to operate the laser in Leave the laser to run for 10 minutes before installing in its location 152 761UK User Manual WG qtx CONNECT WITH POWER SUPPLY THE GROUND WIRE MUST BE CONNECTED Use the supplied IEC lead to connect to the main power supply as follows Brown Live Oo e o Yellow Oye I For your safety please kindly pay attention to all of the warnings below Always plug in the power plug last and disconnect from the mains when the device is not in use or before cleaning Do not install and operate the device in rain or extreme heat moisture or dusty environments This device is fo
7. with 3 pin XLR connectors for DMX input and output The SE connectors are wired in parallel Only use a shielded twisted pair cable designed for 3 pin XLR plugs and connectors in order to connect the controller with the fixture or one fixture with another DMX output DMX input XLR mounting sockets rear view XLR mounting plugs rear view l 1 Shield 2 Signal 3 Signal Building a serial DMX chain ho L es A HD 5 el OL poo al pp Le Controller operation py E E A 1200 Caution At the last fixture the DMX cable has to end with a terminator Solder a 120 Ohm resistor between PIN 2 and PIN 3 into a 3 pin XLR plug and plug it in the DMX output of the last fixture When in DMX mode there are two channels with the following function 152 761UK User Manual WG qtx INTRODUCTION GYRO RGB LASER Thank you for purchasing this Gyro laser This laser effect moves away from the traditional stepper motor laser patterns of the past producing some spectacular gobo effects that rotate at different speeds whilst transforming into different colours and shapes The laser is best projected on to a flat surface such as a wall or ceiling or through smoke Brighter red laser technology allows this effect to produce much more vibrant colours Works great as a single unit or as a pair and is an
8. y E qtx Laser projection should be at least 3m above audience and should be below balcony level 152 761UK User Manual LAYOUT GYRO LASER 1 Mounting bracket 2 Thumb screw 3 Laser Aperture TLL AY VAL E qtx 152 761UK User Manual WG qtx TROUBLESHOOTING If the unit is not functioning properly Check that the IEC cable is connected properly Check that the mains power switch is on Check the fuse hasn t blown see below guide Check that the unit isn t in DMX mode Check the safety key is turned to the on position If in sound to light mode ensure the microphone sensitivity is turned up REPLACING FUSE First disconnect from the mains power supply then remove the fuse holder above the IEC Socket to reveal the fuse Replace with the correct fuse rating as stated on the product or in the user manual Then lock the fuse holder cover back into place GENERAL MAINTENANCE Be sure to power off the fixture before conducting maintenance To maintain optimum performance and minimise wear fixtures should be cleaned frequently Usage and environment are contributing factors in determining frequency As a general rule fixtures should be cleaned at least twice a month Dust build up reduces light output amp performance as well as overheating This can lead to reduced life and increased mechanical wear Unplug fixture from power Use a vacuum or air compr
Download Pdf Manuals
Related Search