SMARTSHOXX User Manual
Contents
1. or vibrations select the LOW g Select position for switch 1 For all other applications such as ball targets impact shields or tackle bags use the HIGH g select setting If you have any questions please do not hesitate to contact support fusionsport com Elite Performance at the Speed of Light Limited Only by Your Imagination2. SMARTSHOXX User Manual fusion sport www fusionsport com Thank you for ordering Fusion Sports SMARTSHOXX impact and vibration sensor By attaching SMARTSHOXX to a SMARTSPEED or SMARTSPEED LITE unit you can now incorporate objects such as targets ball machines or goals into your favorite drills INSTALLATION AND SETUP To install the module just plug the PS 2 connector green into the PS2 port on your SMARTSPEED or SMARTSPEED LITE unit Be sure to align the pins correctly DO NOT FORCE the connection if it does not connect easily With the SMARTSHOXX sensor connected you do not require a reflector opposite SP 07 9 PSI2 Add on the unit If the unit continues to beep for alignment check the PS2 connection Choose your SMARTSPEED drill and proceed with Start a New Session During the scan the gate s with SMARTSHOXX attached should be scanned as G MAT in the device list After scanning select your drill as usual SMARTSHOXX can be used on any gate in any drill except jumping as an alternative to the photocell sensor Finally during the test track phase when you must pass through the gates to identify them simply press the small button on the top of the SMARTSHOXxX sensor A small LED will flash on the sensor and the gate will beep CONFIGURING THE MODULE You can use the dip switches on the SMARTSHOXX module to adjust 1 Intensity dip switch one set the intensity of impact re
3. quired to trigger an event Set both switches to the bottom position for highest sensitivity and both switches to the top for lowest sensitivity higher required impact Elite Performance at the Speed of Light Limited Only by Your Imagination AN SMARTSHOXX User Manual Z N P fusion sport www fusionsport com Intensity Dip switch one 2 Special Functions Dip Switch Two on the second dip switch module you can configure two additional things a G select left switch this switch is a multiplier of the Intensity dip switch There are therefore 8 sensitivity settings Easy g Low Medium g Low Hard g Low Very Hard g Low Easy g High Medium g High Hard g High Very Hard g High b Re arm time after the initial impact SMARTSHOXxX will ignore further signals until the unit is rearmed This is used to ignore continuing vibrations in an object after the initial impact If your target is prone to a lot of shaking after the impact such as a thin plastic board selecting a longer re arm time will ignore any false signals NOTE if you need any additional fine tuning of the rearm time this can be set in the OPTIONS tab of the SMARTSPEED software in many protocols Special Functions Dip switch two g Select low high low High default Switch 1 Retriggering time ms 50ms 50ms 300ms 300ms Switch 2 For sensitive applications such as fencing athletics starts and other slight movements
Download Pdf Manuals
Related Search