MOD. RW(WU150)
Contents
1. 2013 WUNDER USER MANUAL 13 IDENTIFICATION LABELS WUNDER SABI sri i RW VANO BATTERIE i C 1 3 0291 Per la sostituzione della batteria modello ricaricabile tipo RETC 7 2 V 2000 mAh RW WU 150 uax 300 kg vedere il manuale di istruzioni DK 0199 336 ee To replace the battery Matr 0081 SEISE rechargeable sealed type RETC 7 2 V 2000 mAh see the manual WUNDER Sa Bi S r L ce OAR Tu IB Temperatura di stoccaggio 0 60 C Model RW W150 12V 2A Internally powered equipment with battery 1 or supplied by external model AD 8057 DK Storage Conditions Temperature 0 60 C Internamente alimentata con batteria oda AGDE alimentatore esterno modello AD 8057 DK RW stoccaggio SER NR CONFORME ALLA DIRETTIVA 93 42 CEE CE 0470 14 SCRAPPING AND WASTE DISPOSAL Disposal X EU 2002 96 EC This product complies with EU Directive 2002 96 EC The crossed bin symbol on the appliance indicates that the product at the end of its useful life should be disposed of separately from household waste must be completed in a recycling center for electrical and electronic equipment or returned to the dealer at the time of purchase of a replacement You are responsible for taking the appliance at the end of life at an appropriate collection facility Appropriate separate collection to start the device resigned to recycling treatment and environmentally compatible disposal contributes to avoiding poss2. APPLIANCES Il DUAL INSULATION RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL 3 SAFETY A WARNINGS Operators must read this manual carefully comply with the instructions it contains and become familiar with the correct use and maintenance procedures of the instrument Retain this manual for consultation and as a help in staff training Do not overload the instrument beyond its maximum capacity Do not apply loads abruptly Do not press the keys with sharp or pointed objects Do not try to open the instrument Do not remove seals from the instrument Do not short circuit the battery terminals Use only the power supply provided by Wunder Before using it make sure that the local mains voltage is compatible with the voltage of the adapter shown on the identification plate Regularly check the integrity of the instrument s power cord and make sure it does not come in contact with hot appliances Make sure that the power cord does not create obstruction hazards Unplug the instrument before cleaning it Do not place the instrument in water or other liquids Perform maintenance and subsequent metric verifications regularly Key Functions Power Supply Operation Temperature 4 TECHNICAL SPECIFICATION Model RW 02 Capacity 300kg x 100g OIML Approval Classe III Weighing Unit Kg LCD Display LCD 20mm con 5 digits second LDC for Height and BMI ON ZERO OFF HOLD BMI TARA PRINT MEMORY Adapter 12V 2
3. TT SS 2008 gt RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL 7 2 Instruction for charging and connecting If la prompt displays on the LCD please charge the scale with exclusive adaptor Locate adaptor plug on the rear side of indicator The battery should be recharged at least every 3 months regardless if it is used or not After a long period in storage e g over 3 months the battery should run a full cycle charge discharge to allow it to restore to full capacity AC Jack connector 7 3 Instruction for replacing batteries 1 Open the battery cover and take the battery out 2 Disconnect the rechargeable battery pack then replace it by a new one Put the battery back then arrange the connector in place well 7 4 Weighing Switch on the scale using key The diagnostic scale self check is performed and the software version is displayed The 0 00 kg weight displays on the screen now the scale is ready for weighing Note If display is not at 0 0kg while switching power on Kindly press key to zero the scale which can be used at any time to zero the RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL 7 5 Hold function The scale is provided with the integrated hold function to determine the average weight It enables people to be weighed accurately although they are not still on the scale platform e Switch ON the scale using ON ZERO OFF key The diagnostic self check will be
4. display will show pre tare weight of m5 first The pre tare weight will blink and a annunciator under pretare will be turned on Press TARA key till the intended memory of pre tare weight displayed Press ZERO key to confirm the pre tare weight to be used the instrument will automatically perform tare function Press MEMORY key return to Weighing Mode Pretare annunicator will be turned off m 8 PRINTING FUNCTION WUNDER Weight can be printed for records using RS232 interface cable Date Month Year hour minute After weighing simply press PRINT key to print out the results Peso Weight 30 00kg The format presented below is the standard format of results print out and cannot be changed Altezza Height 0 0cm Parameters of RS232 interface Indice Massa Corporea N A MlI Bady Mass Index Seriale RS232 Normopeso Normal wei p Sovrappeso e PIN 3 Pre obesity ll x Obesit calaae I PIN 6 M PIN 1 Obesity class I Obesit calaae II Obesity class II Obesit calaae III Obesity class III amp 10 RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL Connecting with PC Start Hyper Terminal program from clicking Start Menu Programs Accessories Communication Hyper Terminal 1 New Connection Description Give new connection a name then click OK 2 Select Your COM Port Click Connect to select your COM port Usually there s only one option for sel
5. A Rechargeable battery pack D o4 99 0 RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL 3 INDICATOR 1 Weighing Capacity and division 2 Key Functions 3 Main display 4 Second display height BMI D Power indication Key Description Turn ON the scale long press 3sec to turn off the scale To reset the display to 0 0kg display Zero the scale 2 of full capacity HOLD To hold weighing result on the display determine stable weighing value Long press 3sec to determine the Body BMI Mass Index BMI Tare un wanted weight To store 5 pre tare values Print out data 5 2 Display Net weight Weight stable Hold function Zero symbol owt Stable symbol To indicate that the weight is stable 40 E E l ae Weight minor lt _ a Minor weight Weight under zero nm d c Ba a 1 n Zero symbol Weight is at zero point Zero Low battery Battery need to charge or replaced Low Battery 4 I 9001 Certified RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL 6 INSTALLATION After unpacking the unit check the integrity and the submission of all components The instrument should be situated away from heat sources in an environment free from excessive vibration and air currents The weighing platform must be placed on a flat stable surface and all the feet should rest on the ground Version standard with cable The instrument is ready for use 6 1 ASSEMBLY INSTRUCT
6. ION FOR THE OPTIONAL ACCESSORY WALL MOUNTING BRACKET RW 150 Version with cable with wall support optional included 1 Place the metal bracket to the wall and properly mark the holes Insert dowels into the holes Fix the wall support with screw included Wall pin plug 1 Self tapping screw 4 20 2 3 Fix the indicator support with screw included Phillips screw M4 x 0 7 x 10mm RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL STAND FOR THE INDICATOR RW 150 Version stand display optional not included only request 1 The user can decide to connect the cable inside or outside column 2 Fix the display with screws included to the stand Column d Round plate Sunk Screw M4x07x8 T INSTRUCTION FOR USE 7 1 Time setting Long press PRINT key for 3 seconds to enter the TIME SETTING mode beginning with the top row with the flashing digit Press PRINT key after successful change to move to next step EX To input Dec 25 2008 8 00am Enter year Using TARE keys to decrease the value press HOLD key to move to next digit Press PRINT key after successful entry to move to next stage Enter date Using TARE keys to decrease the value press HOLD key to move to next digit Press PRINT key after successful entry to move to next stage Enter time Using TARE keys to decrease the value press HOLD key to move to next digit Press PRINT key after successful setting Display Format YYYY MM DD
7. WUNDER USER MANUAL a da www wunder it WEIGHING PLATFORM WHEELCHAIR MOD RW WU150 INSTRUCTION MANUAL f CE M CD A Read this manual carefully before using the instrument INDEX 2 SEINE B UI n PAGE2 3 111 PAGE 3 4 ues cine r1 ON MN M eee PAGE 3 5 jp eio e PAGE 4 6 jr iE ett PAGE 5 7 INS TUG TI RU M E E E E E E E aaeenapun geet PAGE 6 8 az FONG MON iaoeia PAGE 10 9 ETNO SETU T PAGE 10 deduc M PAGE 12 11 MAINTENANCE AND ASSISTANCE a sagcznazesecrsrssuneret vn taganesnneesdineean ina eminence mioin iaaiiai Cpu DU PIDE iiaiai NEM PAGE 12 12 CONFORMITY 7 PAGE 12 13 Tei a A TI ON CAREI Cane as seo ere e eee eo patere euentum dO ag RUNDE UNUM PAGE 13 14 SORAPPING AND WASTE DISPOSAL M PAGE 13 15 Qm PAGE 14 1 RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL By choosing the WUNDER mod RW WU150 professional electronic scale you have purchased a high precision instrument Since over 40 years Wunder has placed its experience at the service of health This instrument i
8. cated in this manual or anyway resulting from improper use The Court of Bergamo has jurisdiction in case of any dispute 14 RW WU150 REV 00 15 02 2013
9. ect Then click OK 3 Port Settings Click Bits per second to set up rate at 9600 Data bits at 8 Parity at None Stop bits at 1 and Flow control at Hardware Then click OK to complete your setting 4 Output Data When press the PRINT key to output data from scale to PC or an 9 SETTING SETUP Cm P Switch ON the scale and long press 7 key for 3 seconds first SETUP and then A OFF will display successively AUTO OFF TIME SETUP This enables operator to select the auto turn OFF time of the device BUZZER ON OFF SETUP This enables operator to select beep sound ON OFF Auto off time 120 sec 180 sec 240 sec 300 sec off Buzzer On Off C mana Press key 3 seconds HOLD key means enter SEEUP Ll RDFF 20 5 oS 2405 300 5 birr On gt OFF End HOLD BMI when End ote To confirm the settings please press displays on the display 11 RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL 10 ERROR MESSAGE ERROR MESSAGE REASON ACTION Low Battery Please replace a new battery or plug This warning shows that the voltage of the AC adaptor for operation battery is too low to use Overload Please reduce the loading and try L r y The total load exceeds the maximum again capacity of scale Counting error too high This error is normally caused by a E H Indicates that the signal from the load serious fault on the scales such asa rr cell s is too height faulty load cell or wir
10. en by the current catalogue pricelist By warranty we mean the replacement or repair free of charge of parts making up the appliance which at the discretion of the manufacturer are deemed faulty from the origin Wunder therefore has the faculty of repairing or replacing the item The warranty does not cover e Shipping faults damage caused by falls carelessness or tampering e damage caused by incapability of using the appliance and of its improper use e damage caused by an insufficient or inadequate electrical system or alterations resulting from environmental climatic or other types of conditions e damage due to incorrect installation of the appliance and repairs carried out by unauthorised personnel e Interventions at home for convenience controls or presumed defects e Routine maintenance and that which can be considered normal wear from use e consumables such as power supplies batteries keyboards plates wheels heads rolls load cells faulty due to blows or overloads Service can also be refused when the appliance has been changed or transformed in any way In case of interventions at one s home the customer must pay the fixed fee if however the appliance is repaired at an authorised Wunder Service Centre expenses and relative travel risk are borne by the user Wunder will not be held liable for damage of any nature caused directly or indirectly to persons animals or objects resulting from failure to comply with all the instructions indi
11. f a container clothes from the reading of the instrument thus giving the true weight of the product person being tested gt 30 Turn on the scale using OUS k 10 When 00 displays on the screen and scale beeps twice Place the object clothes need to be tare on the tread platform mm Press Ss ari I 40 Display will return to 00 A after the weight stabilizes and stable sign appears on the display Place the item baby need to be weighed without removing the tare object The weighing result is the Net weight of the item baby To delete the saved tare value remove the tare object from the tray and press um BEN 7 8 Pretare function key again The scale can store 5 sets of pre tare weight To use dead weight to store pre tare value at m1 memory 1 m5 memory 5 as below Using Dead Weight DESCRIPTION EXAMPLE Press MEMORY key after loading the weight on the platform the display shows blinking mX sign ex m1 d nil Press TARA key to address the memory m1 m5 ka preur fet wed P C um gh a ight F x eat reete bhad nel o Bl Press ZERO key to store the pre tare weight the instrument will be sounding beep m RW WU150 REV 00 15 02 2013 iso 9001 Certified WUNDER USER MANUAL 7 9 Recall Pre Tare Weight DESCRIPTION EXAMPLE Bera hii am wen rs Long press MEMORY key for 3 seconds the
12. ible negative effects on the environment and on the health and promote the recycling of materials of which the product is composed For more detailed information covering the collection systems available contact your local waste disposal service or the shop where the product was purchased As a consumer you are legally obliged to return used batteries or empty You can deposit your old batteries at public collection points in your town or you can place them at any dealer of different kind of batteries that have positioned the bins provided Even in the case of destruction of electrical and electronic equipment must be removed and stored in special containers NOTE The following symbols are to indicate the presence of harmful substances Batteries Pb Pb Batteries containing Lead Cd Cd Batteries containing Cadmium Hg Hg Batteries containing Mercury AN WARNINC Do not dispose of electrical parts and batteries in household waste Dispose of the battery through collection centers near you 13 RW WU150 REV 00 15 02 2013 WUNDER USER MANUAL 15 WARRANTY This certificate must be kept until the warranty has expired It must be presented together with the invoice tax receipt or delivery note providing the name of the dealer and date of purchase whenever a technical intervention is required Otherwise the user will lose any warranty rights The warranty takes effect from the date of purchase and is valid during the entire period forese
13. ing Please contact the local service representative Counting error too low This error is normally caused by a E L Indicates that the signal from the load serious fault on the scales such as a r r cell s is too low faulty load cell or wiring Please contact the local service representative Zero count over calibration zero range Please re calibrate the instrument cl cl L cl L 10 while power on Zero count under calibration zero Please re calibrate the instrument T T T T T range 10 75 while power on EEPROMI Error This error is normally caused by a L p Indicates that there is a fault with the serious fault on the scales such as a rr scales software faulty load cell or wiring Please contact the local service representative 11 MAINTENANCE AND ASSISTANCE Cleaning the instrument must be done with a soft cloth dampened with water or neutral detergent avoiding the use of solvents or abrasives During transportation be careful not to subject the instrument to excessive physical shock or mechanical stress In case of repair or service contact your dealer 12 CONFORMITY WEIGHING INSTRUMENT DIGITAL WUNDER RW WU150 MODEL SERIAL NUMBER This is to certify that this instrument has been tested and has passed the functional test Meets the following standards EN 45501 EN60601 1 2 EN60601 1 93 42 EEC Medical Devices Directive 12 I O 9001 Certified RW WU150 REV 00 15 02
14. performed and after that 0 0 kg will display on the screen with stable and zero sign e Move the object person on the scale platform amp Press the HOLD BMI key once The HOLD will display on the screen with blinking triangle and after few seconds the average of fluctuating weight will display on the screen and will lock on the display e To release the locked weight on display simply press the HOLD BMI key again and the display will return to normal mode automatically HOLD BMI key function can be activated before or after putting the weight on the tread platform But in case of weighing unstable person it is recommended to press HOLD BMI key after the person moves on the tread platform 7 6 BMI function In normal mode long press HOLD BMI key 3sec to enter into BMI mode The second display will show last height and the extreme left digit will blink Use TARE to decrease value and press HOLD to change to next digit Press ON ZERO OFF key to confirm height value When the display shows Hold please stand on the scale platform Proceed to weigh as normal The instrument will show the weight height and BMI value Wl bcm To release the locked weight on display simply press the HOLD BMI key again and the display will return to normal mode automatically RW WU150 REV 00 15 02 2013 WUNDER 7 7 Tare function USER MANUAL Tare allows the user to zero the instrument to cancel the weight o
15. s compliant with national standards in hospitals and clinics with medical class with measurement function and is calibrated in conformity with accuracy class Ill The instrument is characterised by the possibility of fixing the electronic terminal to the weighing platform by means of a column or else installing the terminal autonomously The instrument is equipped with a dual LCD electronic terminal with triple reading to simultaneously view Weight Height and BMI 2 GENERAL RULES iCarefully read this manual before using the instrument as it supplies important indications concerning OPERATING SAFETY AND MAINTENANCE The descriptions and illustrations supplied in this manual are not binding WUNDER reserves the right to modify its products as deemed convenient in order to approve them without being committed to update this publication Conventions The following symbols have been used in this manual CE 0470 MEDICAL CERTIFICATION M METROLOGICAL CERTIFICATION AND APPROVAL FOR MEDICAL USE ACCURACY CLASS Fam ASSISTANCE WARRANTY CERTIFICATE ATTENTION PLACED BEFORE DETERMINING PROCEDURES COMPLIANCE FAILURE CAN DAMAGE THE PRODUCT WARNINC PLACED BEFORE DETERMINING PROCEDURES COMPLIANCE FAILURE CAN HARM THE OPERATOR OR PATIENT OR DAMAGE THE PRODUCT TYPE B PARTS SUPPLIED BATTERY POWER AN A A WASTE DISPOSAL Eg INDICATION OF WEIGHT FUNCTIONALITY 4 INDICATION OF STABLE WEIGHT 9 INTERFERENCE COULD OCCUR NEAR THE
Download Pdf Manuals
Related Search