Troubleshooting The reticle is blurry and not in focus First remove
Contents
1. Point of focus is not precise The mounting ring is loose or shifts The mounting ring of the slide to side mount is factory preset to provide a firm connection without major shifting Overtime if the mounting ring begins to shift in its seated positions the hex screws on the front and rear of the mounting base can be tightened in order to increase tension Finally minimum shifting of the magnifier will not affect the point of impact of your weapon sight The mount s base is loose or shifts If the quick release mount shifts fore and aft the mount needs to be tightened per instructions on page 8 of the user manual The mount should have a firm grip with no shifting in its base to ensure it is securely installed2. Troubleshooting The reticle is blurry and not in focus First remove the magnifier from your weapon Next make sure the objective lens and eyepiece are clean and do not have any film fingerprints or debris covering their surface Blow off any debris or dirt covering the lens Use a lens cloth or q tip dipped in alcohol to remove any film or fingerprints Next look through the magnifier at an object at least 20 yards away Adjust the diopter adjustment on the eyepiece until the image is sharp and focused If the image cannot be focused it should be returned for service If the image can be focused reinstall the magnifier on your rifle and align it with your weapon sight If the reticle now appears slightly blurry it is a limitation of the optical system of the weapon sight Lower cost reflex and red dot sights generally use a single lens optical system that cannot precisely collimate the light rays of the reticle s image in a parallel line To the unaided eye the dispersion of the reticle image is not noticeable When viewed with a magnifier the dispersion is visible making the reticle appear slightly blurred Generally the aiming point is still useable if there is minimal blurring Blurriness of the reticle can also vary between different weapon sight manufacturers This is not a defect of the magnifier but a limitation of the weapon sight s optical system Single lens with spherical aberration Light rays are not collimated to single point
Download Pdf Manuals
Related Search