Use and Care Manual
Contents
1. amp close the link K1 Cut the wire plug off Feed the fixture wires through the Loop F and Nipple C and pull until taut Connect fixture wire to the wire from junction box with wire connectors See paragraph below Push canopy G up against ceiling and secure with loop collar H WIRE CONNECTION FOR WIRE CONNECTION BE SURE TO CONNECT FIXTURE SMOOTH WIRE TO THE BLACK HOUSE WIRE RIBBED WIRE TO THE WHITE HOUSE WIRE AND FIXTURE GROUND WIRE TO SUPPLY GROUND WIRE WITH WIRE CONNECTORS OR THE FIXTURE GROUND WIRE FROM THE FIXTURE TO THE GREEN GROUND SCREW ON THE MOUNTING BRACKET Your installation is now complete Turn power on2. For wood or acoustic board ceilings minimum thick size is 1 1 2 Inch 1 Select a place on the ceiling where a wood beam exists 2 Thread the steel screw B into hook C 3 Screw the assembly into the wood beam 4 Drape your chain to second hook or let it hang straight HOOK THE CHANDELIER ASSEMBLY TO THE CHAIN 1 Open the lock link K2 provided connect to the fixture Loop J and chain link amp close the lock link K2 2 Once chain amp wire are arranged plug the wire plug into household electrical outlet e IMPORTANT SAFETY INSTRUCTIONS This portable lamp has a polarized plug one blade is wider than the other CEILING STEP 4 FIX WIRE INSTALLATION 2 alternative We advise contacting a qualified electrician for this step Thread Nipple C into Loop F until snug Thread other end of Nipple C with loop attached into Crossbar D until snug Place lock Washer B over end of nipple protruding through crossbar and thread hex nut A onto nipple until tight Take this crossbar assembly and mount to ceiling junction box with Junction box threads E Tighten thread securely with screwdriver Open the lock link K2 provided connect to the fixture Loop J and chain link amp close the lock link K2 Lace the fixture wires through the chain Slip loop collar H over the chain Then do the same with Canopy G Open the end link K1 of the chain and hang the fixture on the loop F
3. USER S MANUAL MINI CEILING LAMP ITEM 8441 3H 8442 3H 8443 3H WARNING 1 Shut off the power to the area where you will be booking 2 Use 60Watt maximum type A bull 3 Do not use polish or cleaner on your lamp Just wipe with soft STEP 1 UNPACK Carefully unpack your new fixture and lay out all the parts on a Clear surface STEP 2 CEILING LAMP ASSEMBLY 1 Install the bulb not included into the E27 Socket 2 Put L on the M first and put the N on the M 3 Screw P on the M for fixing IMPORTANT NOTICE THERE ARE 2 WAYS TO INSTALL THIS CEILING LAMP PORTABLE WIRE STEP 3 OR FIXED WIRE STEP 4 P INSTALLATIONS FOR FIXED WIRE INSTALLATION WE ADVISE CALLING A QUALIFIED ELECTRICIAN WHEN MAKING THE WIRE CONNECTIONS TO THE JUNCTION BOX STEP 3 PORTABLE WIRE INSTALLATION 1 alternative NOTE CUT OFF THE FIXTURE COPPER GROUND WIRE CAUTION 1 INSTALLATION SHOULD NOT BE MADE ON A RADIANT HEATING CEILING 2 THE HOOKS ARE TO ENGAGE THE CHAIN ONLY AND NOT THE ELECTRIC WIRE A HOOK INSTALLATION PACKET INCLUDED TWO HOOKS For plaster or plaster board ceilings 1 Drill a hole in the ceiling to the same diameter as the closed flaps of the enclosed TOGGLE BOLT assembly A 2 Insert flaps and bolt into the ceiling with the TOGGLE BOLT protruding CENING through the ceiling lock the assembly by threading on the hook as shown 3 Drape your chain to second hook or let it hang straight
Download Pdf Manuals
Related Search