TR-7 - HARMAN Professional
Contents
1. DECLARATION OF CONFORMITY Manufacturer s Name Harman Signal Processing Manufacturer s Address 8760 S Sandy Parkway Sandy Utah 84070 USA declares that the product Product name TR 7 Product option All requires Class Il power adapter that conforms to the requirements of EN60065 EN60742 or equivalent conforms to the following Product Specifications Safety IEC 60065 01 Amd EMC EN 55022 2006 EN 55024 1998 FCC Part 15 Supplementary Information The product herewith complies with the requirements of the Low Voltage Directive 2006 95 EC EMC Directive 2004 108 EC RoHS Directive 2002 95 EC WEEE Directive 2002 96 EC EC Regulation 278 2009 With regard to Directive 2005 32 EC and EC Regulation 1275 2008 of 17 December 2008 this product is designed produced and classified as Professional Audio Equipment and thus is exempt from this Directive With regard to the PS200R and Directive 2005 32 EC and EC Regulation 278 2009 of 6 April 2009 this regulation applies to Class A single output external power supplies The PS200R used with this product is a multi output power supply and thus is exempt from this Directive Roger Johnsen Vice President of Engineering 8760 S Sandy Parkway Sandy Utah 84070 USA Date July 26 2010 European Contact Your local DigiTech Sales and Service Office or Harman Signal Processing 8760 South Sandy Parkway Sandy Utah 84070 USA Ph 801 566 8800 Fax2. 801 568 7583 If you want to dispose of this product do not mix it with general household waste There is a separate collection system for used electronic products in accordance with mmm legislation that requires proper treatment recovery and recycling Private households in the 25 member states of the EU in Switzerland and Norway may return their used electronic product free of charge to designated collection facilities or to a retailer if you purchase a similar new one For countries not mentioned above please contact your local authorities for a correct method of disposal By doing so you will ensure that your disposed product undergoes the necessary treatment recovery and recycling and thus prevent potential negative effects on the environment and human health ELECTROMAGNETIC COMPATIBILITY This device complies with part 15 of the FCC Rules and the Product Specifications noted on the Declara tion of Conformity Operation is subject to the fol lowing two conditions this device may not cause harmful interference and this device must accept any interference received including interference that may cause undesired operation Operation of this unit within significant electromagnetic fields should be avoided use only shielded interconnecting cables WARNING For your protection read the following Important Safety Instructions Read these instructions 2 Keep th
3. ratio of tapped tempo and the speed at which the effect should modulate Type Tremolo Opto Tremolo Bias Tremolo Duo Trem Rotary Ultravibe VibroPan second second second second second second second 4 Hz 4 bea 4 Hz 4 bea 4 Hz 4 bea 4 Hz 4 bea 2 Hz 2 beai 2 Hz 2 bea 2 Hz 2 beai tS tS tS tS tS tS per second per second per second per second per second per second per second Performance Accessories The performance accessories make integrating a HardWire pedal into any pedal board a snap The following accessories are included e Hook and loop Pedalboard Pad designed to attach to the surfaces found on most commercial pedalboards e Foot Switch Glow Sticker easily visible on dark stages StompLock keeps your settings where you want them Hook and loop Pedalboard Pad To attach the Pedalboard Pad do the following I Peel off the existing rubber skid pad from the bottom of the pedal 2 Peel the adhesive protector from the back of the Pedalboard Pad 3 Apply the Pedalboard Pad to the bottom of the pedal Foot Switch Glow Sticker To attach the Foot Switch Glow Sticker do the following I Peel the adhesive backing from the Foot Switch Glow Sticker 2 Apply the Glow Sticker to the top of the Foot Switch StompLock To place the StompLock over the pedal knobs do the following I Set the knobs to your preferred se
4. suggested by the manufacturer The foregoing is in lieu of all other warranties expressed or implied and DigiTech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control NOTE The information contained in this manual is subject to change at any time without notification Some information contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since this version of the manual was completed The information contained in this version of the owner s manual supersedes all previous versions Congratulations You have just purchased a DigiTech digital effect pedal Unlike many analog pedals the number of hours digital pedals can be powered with 9 Volt alkaline batteries is limited due to the constant draw which digital signal processors require Until battery technology advances to meet the requirements of digital pedals we suggest that a battery be used mainly for demonstration and practice purposes If you notice a change in the LED s brightness or the pedal will not switch from Bypass to Effect replace the battery with a new 9 Volt alkaline battery or visit your local DigiTech dealer to obtain a power adapter and unleash the pedal s full p
5. United States DigiTech warrants this product when purchased new from an authorized U S DigiTech dealer and used solely within the U S to be free from defects in materials and workmanship under normal use and service This warranty is valid to the original purchaser only and is non transferable DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect provided the product is returned to DigiTech WITH RETURN AUTHORIZATION where all parts and labor will be covered up to a period of one year this warranty is extended to a period of six years when the product has been properly registered through our website A Return Authorization number may be obtained from DigiTech by telephone The company shall not be liable for any consequential damage as a result of the product s use in any circuit or assembly Proof of purchase is considered to be the responsibility of the consumer A copy of the original purchase receipt must be provided for any warranty service DigiTech reserves the right to make changes in design or make additions to or improvements upon this product without incurring any obligation to install the same on products previously manufactured The consumer forfeits the benefits of this warranty if the product s main assembly is opened and tampered with by anyone other than a certified DigiTech technician or if the product is used with AC voltages outside of the range
6. ese instructions 3 Heed all warnings 4 Do not use this apparatus near water 5 Clean only with dry cloth 6 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 9 Unplug this apparatus during lightning storms or when unused for long periods of time 10 No user serviceable parts inside Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture 12 Refer to labels on the unit including bottom cover for other markings and pertinent information WARRANTY We at DigiTech are very proud of our products and back up each one we sell with the following warranty 2 Please register online at www digitech com within ten days of purchase to validate this warranty This warranty is valid only in the
7. fy knob controls 5 Type Knob Selects one of 7 Tremolo Rotary types 6 Input I Mono an amp effects send Connect your instrument the output of a pedal or to this jack When only a single input is needed this jack must be used Signals will still be heard at both outputs when only the Input Mono jack is connected Connecting a guitar cable to the Input Mono jack supplies battery power even though the Indicator LED may not be lit To prolong battery life disconnect all cables from the pedal when not power the input can Input 2 Connect in use If the optional power supply is used for remain connected a second pedal s output to this jack for stereo operation Inputs and 2 are fed through the stereo Tremolo Rotary effects and then to Outputs and 2 and will keep true stereo separation between channels NOTE When the Rotary type is selected and the effect is on this input is summed with Input and then fed through the Rotary effect 8 Foot Switch Release Pins These two pins are spring loaded hinges that hold the pedal in place Push these pins in with the tip of a 1 4 guitar cable to release the pedal from the pedal chassis exposing the battery compartment See battery replacement diagram 9 Indicator LED This LED indicates when the e ffect is turned on or off When battery power is low approximately 15 minutes before end of life the Indicat
8. is from 0 degrees phase minimum knob position to 180 degrees out of phase maximum knob position A more dramatic effect is heard when connecting both outputs to two separate amps Amplifier Setup 4 Harman Power Supply optional HardWire TR 7 Tremolo Rotary Effects Loop Setup AMP RETURN o lt Harman Power Supply optional AMP SEND NOTE If the amp effects loop has a mix control set the mix to 100 full wet Battery Operation In the event that battery power is completely depleted HardWire pedals automatically switch into bypass This eliminates the need to remove the pedal from your pedal chain if the battery is dead To replace the battery do the following I Using the tip of a 1 4 guitar cable push one of the Release Pins in on either side of the Foot Switch and remove it from the pedal chassis 2 Remove the battery from the battery compartment and disconnect the battery cable 3 Connect a new battery to the battery cable and put it back in the battery compartment Make sure the battery cable does not interfere with the spring or pedal switch arm Place one hole of the Foot Switch over its corresponding pin 5 Push the opposite pin in and lower the other side of the Foot Switch into place over the depressed pin Release
9. or LED begins to dim givi ng you that very shortly you will need to replace the bati 10 Foot Switch Press the Foot Switch to turn the effect on and off II Output Mono Connect this output to the input of a single guitar amplifier another pedal input or an amp effects return 12 Output 2 Connect this output to the input of a second guitar amplifier when a second amp is being used NOTE Use unbalanced mono instrument cables only advanced warning tery Tremolo Rotary Types Tremolo Basic amplitude modulation effect with a variable waveform selector Opto Tremolo Tremolo based on an opto isolated tremolo circuit found in vintage Fender amps Bias Tremolo Tremolo based on varying the power tube bias used in vintage Vox amps Duo Trem Dual tremolos connected in series that interact with each other to create complex rhythm patterns Rotary Emulates a legendary Leslie rotary speaker cabinet with rotating horn and rotor UltraVibe The renowned Uni Vibe effect offering vintage chorusing and vibrato textures VibroPan A unique dual voice vibrato effect with a variable phase control for the voices Modify Knob Controls Depth Depth nsity epth The Speed 2 control affects the second tremolo speed Controls the amount of dry signal added to the effect Range is Chorus dry added min position to Vibrato dry off max position Varies the phase of the two vibrato voices Range
10. otential with unlimited power Introduction More than a remarkable achievement DigiTech s HardWire series represents a collection of significant improvements in guitar effects pedals The HardWire series pedals provide a suite of well known effects each with superior tone and control But these pedals go above and beyond their peers to provide such distinguishing features as true bypass and high voltage operation making them essential additions to the signal chain of players who know about sound quality and demand the utmost in performance Included Items ardWire TR 7 Tremolo Rotary StompLock M Foot Switch Glow Sticker ook and loop Pedalboard Pad Online Warranty Registration Information Card Pedal Interface What Does This Do I Speed Knob Controls the LFO speed of the Tremolo Rotary effect Turning the knob clockwise increases the speed and turning it counter clockwise decreases the speed 2 DC Adapter Jack Connect the optional Harman power supply to this jack Use the proper supply for your area s mains line voltage 3 Depth Knob Controls the intensity of the Tremolo Rotary effect Turn the knob clockwise for a deep Tremolo Rotary sound and counterclockwise for a subtle Tremolo Rotary sound 4 Modify Knob Controls various settings depending on which type is selected See table on page 7 for Modi
11. re TR 7 Owner s Manual 5024343 B Please visit our website at GreenEdgg www digitech com HARMAN
12. the pin When the Foot Switch is properly fastened both release pins are flush with the outer side of Foot Switch a x the pedal l O ES Pedal Switch gt v ta a 7 A Jo Arm xl 9VDC Battery TT Foot Switch Release Pin a Battery Compartment Te e Foot Switch Spring Release Pin Pedal Chassis Tap Tempo The TR 7 s Foot Switch can be used as a Tap Tempo switch for setting the tremolo effect s modulation speed time during a live performance To access Tap Tempo do the following Press and hold the Pedal Switch for 3 seconds The effect first will turn on and the Indicator LED lights solid BLUE NOTE Ifthe effect was already on it wi Afi LE D flashes at t first turn off and then back on after 3 seconds ter 3 seconds of holding the Foot Switch the Indicator LED will begin flashing BLUE indicating Tap Tempo mode is now active and the he current modulation speed Tap the Foot Switch at least two times to set a new modulation speed The last two pedal tap intervals set the modulation speed If a tap hasn t been initiated after 4 seconds two taps will be required again to set the tempo To exit Tap Tempo press and hold the Foot Switch for 3 seconds until the Indicator LED stops flashing and lights solid BLUE again Once Tap Tempo mode is exited the tapped modulation speed remains active until either the Type is changed or the Speed knob is adjusted Below is a table showing the
13. tting 2 Gently push the StompLock over the top of the knobs 3 To remove the StompLock gently lift one side and then the other Specifications Controls Jacks Input Impedance Output Impedance Input Impedance Output Impedance Power Supply Current Draw Power Consumption Dimensions Weight Optional Power Supply Power Supply Polarity Power Supply Output Speed Depth Modify Type On Off Pedal Input Mono Input 2 Output Mono Output 2 gt MQ stereo gt 500 kQ mono effect on I kQ effect on True hardwire bypass effect off True hardwire bypass effect off 9 V Alkaline Dry Battery or Harman power supply 75 mA typical at 9VDC 640 mW typical w optional power supply 5 25 L x 3 5 W x 2 15 H 1 3 lbs Country Voltage Compatible PSU Models Japan 100 VAC 50 60 Hz US and Canada 120VAC 60 Hz Europe 230VAC 50 Hz UK 240VAC 50 Hz Australia 240 VAC 50 Hz e SO PS200R 100 or PS0913DC 01 PS200R 120 or PS0913DC 01 PS200R 230 or PS0913DC 01 PS200R 240 or PS0913DC 02 PS200R 240 AU or PS0913DC 02 PS200R 9 6 VDC 300 mA PS0913DC 9 VDC 1 3 A Recommended power saving GreenEdge power supply models 55 Digitech by HARMAN 8760 South Sandy Parkway Sandy Utah 84070 PH 801 566 8800 FAX 801 566 7005 DigiTech and HardWire are registered trademarks of Harman Designed in the USA Copyright Harman Printed in China HardWi
Download Pdf Manuals
Related Search