Home

User manual - Continental Tires

image

Contents

1. ad A for switching the units bar C to psi F and ser do OK Gt vice versa Navigating the settings menu J Select between the menu items selection is highlighted OK Change settings or open submenus SET Return to vehicle view Change between pressure and temperature display PRESSURE PSI TEMPERATURE C REI EJ 60 ser JL on cts Press the 9 F button to change between the temperature display and the pressure display Warning message overview High Low FAST PRESS LOSS Continuous fast pressure loss Tire dam age or even tire destruction is possible SENSOR DEFECT 2 The tire pressure falls below the recom D VERY LOW mended alarm threshold value Tire dam 1 2 PREPSSRE age or even tire destruction is possible x The tire sensor is no longer properly fixed CHECK SENSOR 2 The tire pressure falls below the recom LOW PRESSURE mended warning threshold value The tire 1 could be damaged in the long term The measured temperature in the tire gt TEMPERATURE exceeds 115 C 239 F The tire sensor Q does not function at 120 C 248 F Due to insufficient signal strength it is not NO SIGNAL possible to display a sensor protocol Sensor is defective 1 Pressure value is only an example threshold values can be stored according the manufacturer s instructions by the specialist garag
2. ntinental GB UsA Brief Instructions ContiPressureCheck Display and pressure control indicator These brief instructions are only intended to illustrate the most important oper ating steps and functions of the display and are a supplement to the actual User i Manual Make sure you also read the detailed User Manual Safety instructions Danger of accident Operating the display while driving can lead to accidents gt Do not operate the display while driving gt View the screen only if the traffic situation allows An incorrectly or carelessly mounted display can impair driving safety gt Before each journey check the seating of the display and stability of the holder Device overview SET Switch between vehicle view and settings LL Navigation between menu items and warn ing messages OK Confirmation of the selected menu item E E Switch between filling pressure or tem perature display in the vehicle view Settings menu Open the settings menu Press the SET button to open the settings menu Day Night mode for adjusting the brightness of the display to day or night conditions Buzzer on off for switching the buzzer on off Display brightness for setting the brightness of the display Day mode 50 75 or 100 Night mode 5 10 or 20 Language selection Autostart function on off for setting the display language Unit selection
3. ing on the trailer Flashes slowly every 2 seconds One of the following warnings is present on one or more of the trailer tires LOW PRESSURE TEMPERATURE NO SIGNAL or SENSOR DEFECT Flashes quickly 5 x per second ing onthe trailer not active for all CPC systems There is a high level warn One of the following warnings is present on one or more of the trailer tires FAST PRESS LOSS VERY LOW PRESSURE or CHECK SENSOR See the user manual for handling instructions for the above mentioned errors KD_CPC_1112_A1_EN A2C84977100 17340570000 www contipressurecheck com
4. e 2 High warning levels are indicted by flashing symbols changing between positive and negative mode See the User Manual for handling instructions for the above mentioned errors I gt Correct the tire pressure only when the tire temperature corresponds to the ambient temperature Otherwise there is a risk that the wrong pressure is set Multiple warnings If various problems occur simultaneously a multiple warning screen is displayed Press the J button to call up each individual warning screen successively Pressure control indicator operating status on the trailer No warning messages for Failure of the pressure control indicator or the CPC system on the trailer are not displayed optionally when moving off after a longer break tor are ready for operation No signal during the journey the trailer pending oo The CPC system for the trailer is not ready for operation for the rest of this journey Lights up for If the pressure control indicator does not 15 seconds produce a signal when switching on the CPC when switch system ignition or pressing the main battery ing on the CPC be CPC system T diei switch either the CPC system on the trailer is system and pressure contro indica not ready for operation or the pressure control indicator is defective In this case it is not possible to monitor the tire pressure of the trailer There is a low level warn

Download Pdf Manuals

image

Related Search

Related Contents

AV-CROCC WD-AVCROC  FJ250B201  USER GUIDE  NGS Blue Polkadots 12.1"  Sony LCS-ELC5 Marketing Specifications  Bedienungsanleitung Zubehör Feuerlöschgerät OERTZEN HDL 250  MONO BLUE 0,055%  Table Of Contents  appendice schede di sicurezza  Epson Expression Home XP-402  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.