dns universal - Videoprogress
Contents
1. signal output clamped PAL deemphasis X 06 Audio right input T 07 gt 08 Earth 09 12 V 10 mA switching voltage output 10 11 Earth 12 Audio left output 13 Audio right output j4 15 Subject to technical alterations and errors 26400 965 01002. EURO AV 7 O 1 DNS UNIVERSAL GRUNDIG Scope of delivery 1 decoder module with installation material 1 adapter plate 2 flat ribbon cables 1 15 pin adapter cable Submin D Euro AV 1 installation instructions General 5 00000 esaou O 000Q 1 15 front side of plug The DNS UNIVERSAL serves for retrofitting the analog GRUNDIG SAT twin cassettes series 33x and series 12xx and the GRUNDIG headend stations STC 50 and STC 1880 The following equipment for example can be connected to this retrofit kit licensed decoder descrambler video recorder e g for operation in a hotel or video cameras e g for monitoring playgrounds The kit is suited for coupling in and out video and audio signals In addition this retrofit kit can remotely be controlled via a 0 12 V switching voltage for example to switch between the signals from a monitor video camera and SAT TV or SAT radio broadcasts The external equipment is switched via the 12 V switching voltage input pin 3 of the Sub Min D socket into the signal path Most decoders descramblers video recorders and video cameras deliver a 12 V switching voltage at the EURO AV socket pin 8 If the connected equipment does not provide a 12 V switching voltage please refer to the paragraph Switching the picture sound signal of external equipment permanently into the signal path on next page Remote switching It is possible to remotely switch betw
3. een the video audio signals of SAT broad casts and the external equipment Switching can be effected for example manually or via a timer or via a dimming switch 1 Connect the remote switch to pin 9 12 V 10 mA switching voltage and pin 3 inside the 15 pin plug of the adapter cable supplied see Fig Continued on next page DNS UNIVERSAL connect 2 plug pins fa o fa 9 Socket es 000 11 15 front side of plug front side of socket Switching the video audio signal of external equipment permanently into the signal path 1 Connect the two pins on the component or solder side of the adapter board with each other see Fig or inside the 15 pin plug of the enclosed adapter cable connect the Pin 9 12 V 10 mA switching voltage with the Pin 3 see Fig Note Only if the external equipment and the cassette are connected via the modified adapter cable the video audio signal from the external equipment is switched into the signal path of the cassette 3 Complete the retrofit kit decoder module adapter plate and flat ribbon cable Important How to install the retrofit kit into the cassette or headend station is desribed in the corresponding user manual Pin assignment of the Sub Min D socket 01 Audio left input 02 Composite signal input uncontrolled 03 12 V switching voltage input 04 Baseband output unclamped PAL deemphasis 05 Composite
Download Pdf Manuals
Related Search