User`s manual addendum for the USB programmer
Contents
1. USB Data Card Programmer user s manual and installation guide O 2001 GARMIN Corporation GARMIN International Inc 1200 E 151 Street Olathe Kansas 66062 U S A Tel 913 397 8200 or 800 800 1020 Fax 913 397 8282 GARMIN Europe Ltd Unit 5 The Quadrangle Abbey Park Industrial Estate Romsey SO51 9AQ U K Tel 44 1794 519944 Fax 44 1794 519222 GARMIN Corp No 68 Jangshu 2nd Road Shijr Taipei County Taiwan Tel 886 2 2642 9199 Fax 886 2 2642 9099 All rights reserved Except as expressly provided herein no part of this manual may be reproduced copied transmitted dis seminated downloaded or stored in any storage medium for any purpose without prior written consent of GARMIN Corporation GARMIN Corporation hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed for personal use provided that such electronic or printed copy of this manual contains the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual is strictly prohibited Information in this manual is subject to change without notice GARMIN Corporation reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes Visit the GARMIN web site www garmin com for current updates and supplemental information concerning the use a2. An unrecognized data card is in the programmer message appears when you attempt to transfer data The Data Card in the Programmer is damaged MapSource must be updated to be compatible with the card Insert a different card and try again Update MapSource software from the GARMIN web site GARMIN 2001 GARMIN Corporation Min GARMIN International Inc 1200 East 151 Street Olathe Kansas 66062 U S A GARMIN Europe Ltd Unit 5 The Quadrangle Abbey Park Industrial Estate Romsey SO51 9AQ U K GARMIN Corporation No 68 Jangshu 2 Road Shijr Taipei County Taiwan WWW garmin com Part Number 190 00201 00 Rev B
3. continue for as long as you use the Product However this License will terminate automatically without notice from GARMIN if you fail to comply with any of its terms or conditions You must agree upon terminations to destroy all copies of the Product The Limitations of Warranties and Liability set out below shall continue in force even after any termination 5 LIMITATION OF WARRANTIES AND LIABILITY THE PRODUCT IS PROVIDED ON AN AS 15 BASIS WITHOUT ANY WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABLE QUALITY MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR THOSE ARISING BY LAW STATUTE USAGE OR TRADE OR COURSE OF DEALING THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT IS ASSUMED BY YOU NEITHER WE NOR OUR DEALERS OR SUPPLIERS SHALL HAVE ANY LIABILITY TO YOU OR ANY OTHER PERSON OR ENTITY FOR ANY INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO LOSS OF REVENUE OR PROFIT LOST OR DAMAGED DATA OR OTHER COM MERCIAL OR ECONOMIC LOSS EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE WE ARE ALSO NOT RESPONSIBLE FOR CLAIMS BY A THIRD PARTY OUR MAXIMUM AGGREGATE LIABILITY SHALL NOT EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT THE LIMITATIONS IN THIS SECTION SHALL APPLY WHETHER OR NOT THE ALLEGED BREACH OR DEFAULT IS A BREACH OF FUNDAMENTAL CONDITION OR TERM OF A FUNDAMENTAL BREACH SO
4. Card Programmer e Notification of Product Updates e Notification of New Products e Lostor Stolen item tracking Introduction Thank you for choosing the GARMIN USB Data Card Program mer or the GARMIN StreetPilot III with Mini USB Data Card Pro grammer To get successful results from your new USB Data Card About This Manual Programmer take time to read through this users manual in order to fully understand all of the operating procedures This manual is organized into three sections The Introduction section provides licensing agreement informa tion and a description of the programmer p Sg Minimum System Requirements The Installation section introduces you to basic features and IBM Compatible PC with Pentium processor 16 procedures for programmer setup fegabytes RAM CD ROM drive Mouse or other The Trouble Shooting section contains information for finding pointing device 256 color display adapter 24 bit solutions to installation and operating problems color recommended and monitor with 640 x 480 resolution or higher and up to 20 Megabytes free hard drive space A 32 bit operating system such Standard Package Contents USB Data Card Programmer as Windows 98 ME or Windows 2000 Universal USB Data Card Programmer Serial Bus port USB The USB Data Card Program CD ROM with USB Device Drivers for Windows 98 ME mer is not designed to operate with Windows 95 or and 2000 and GARMIN MapSource Upgra
5. ME STATES COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU T 6 RESTRICTED RIGHTS If this Product is acquired by or for the U S Government then it is provided with Restricted Rights Use duplication or disclosure by the U S Government is subject to restrictions as set forth in subparagraphs c 1 ii of The Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 or subparagraphs c 1 and 2 of the Commercial Computer Software Restricted Rights at 48 CFR 52 227 19 or clause 18 52 227 86 d of the NASA Supplement to the FAR as applicable The contractor manufacturer is GARMIN International Inc 1200 E 151st Street Olathe KS 66062 USA 7 EXPORT CONTROLS You agree not to export or re export the Product to any country in violation of the export control laws of the United States of America 8 GENERAL This License is the entire agreement between us superseding any other agreement or discussions oral or written and may not be changed except by a signed agreement This License shall be governed by and construed in accordance with the laws of the State of Kansas United States of America If any provision of this License is declared by a court of competent jurisdiction to be invalid illegal or unenforceable such a provision s
6. Programmer CD ROM into your comput er s CD ROM drive 2 Click the Start button and select Run 3 Then type in the drive letter of your CD ROM drive followed by the MapSource Update file name MSUPDATE EXE For example d msupdate exe 4 Press ENTER and follow on screen instructions 5 Open MapSource and check the About box in the help file to determine that you have successfully installed Version 3 04 or later To Install a GARMIN Data Card 1 Insert the Data Card Label up and pin connector end first into the card slot in the Programmer standard USB Programmer pictured to the right For the Mini USB Programmer make sure the GARMIN globe logo on the Programmer is facing UP for proper orientation 2 Be certain to install the Data Card completely into the slot to be sure the pin connections have been made 3 To remove the Data Card pull directly away from the Programmer using the extractor handle on the Data Card Q Use care not to remove the Data Card from the Program mer until data transfer has been completed to avoid pos sible loss of data Disconnecting the Programmer from Your Computer After the USB Data Card Programmer has been successfully installed hardware and software disconnecting and reconnecting the Programmer can performed without additional installation steps 1 Before disconnecting the Programmer be certain that no data transfer is in progress 2 Unplug the USB c
7. ammer and states the driver installation is finished Click on Finish 8 To make sure the USB Programmer has been successfully installed From the Control Panel click on System then the Device Man ager tab then click the by Universal serial bus controller You should see Garmin USB Data Card Programmer on the list Another method would be to open the MapSource program click the Save To Device icon then the USB Port tab You should see Card Programmer listed in the Save Maps To window If the installation is still not successful try shutting the computer off for 1 minute then trying the alternate steps again A red X over the Programmer icon in Device Manager normally indicates a defec tive Programmer If the USB Programmer still will not install please contact GARMIN Product Support for further assistance If you are running an early version of MapSource prior to 3 04 you may upgrade your version of MapSource at this time using the Installation driver CD provided with the USB Data Card Programmer If you already have a version of MapSource newer than 3 05 or City Navigator upgrading from the driver CD is not necessary You Installing the MapSource may also visit the GARMIN web site to download the most recent Software Upgrade upgrade for MapSource To Install the MapSource Software Upgrade including USB Data Card Programmer Support 1 Insert the USB Data Card
8. de Windows NT Software including USB Support The USB drivers are Software Requirements also on the MapSource City Navigator CD ROM Existing installation of GARMIN MapSource Users Manual upgraded to Version 3 04 or later MapSource Users Manual Addendum for the USB Data Card Programmer Introduction Software License Agreement THIS SOFTWARE IS OWNED BY GARMIN CORPORATION GARMIN AND IS PROTECTED UNDER COPYRIGHT LAWS AND INTERNATIONAL COPYRIGHT TREATIES THIS SOFTWARE IS LICENSED NOT SOLD THIS SOFTWARE IS PROVIDED UNDER THE FOLLOWING LICENSE WHICH DEFINES WHAT YOU MAY DO WITH THE PRODUCT AND CONTAINS LIMITATIONS ON WARRANTIES AND OR REMEDIES IMPORTANT CAREFULLY READ THIS LICENSE BEFORE USING THIS PRODUCT INSTALLING COPYING OR OTHERWISE USING THIS PRODUCT INDICATES YOUR ACKNOWLEDGMENT THAT YOU HAVE READ THIS LICENSE AND AGREE TO ITS TERMS IF YOU DO NOT AGREE RETURN THE COMPLETE PRODUCT TO GARMIN INTERNATIONAL INC CUSTOMER SERVICE 1200 EAST 151st STREET OLATHE KS 66062 WITHIN 10 DAYS OF THE DATE YOU ACQUIRED IT FOR A FULL REFUND 1 LICENSE GARMIN we or us provides you with storage media containing computer software the Program which may also include digital cartographic data and on line or electronic documentation and printed materials together called the Product and grants you a limited non exclusive license to use the Product in accordance with the terms of this license agreement Th
9. e copyright and all other rights to the Product shall remain with us You must reproduce any copyright or other notice marked on the Product on all copies you make 2 YOU MAY a install and use one copy of the Product on a single computer or network This copy is to be used by only a single user at a time If you wish to use the Product for more users you will need an additional license for each user b make one copy of the Product for archival or backup purposes c use a copy of the Product on a home or portable computer if that copy is never loaded at the same time it is loaded on your primary computer d transfer the Product to someone else only if you assign all of your rights under this License cease all use of the Product erase or destroy any copy including the hard disk copy made in support of your use of the Product and ensure that the other person agrees to the terms of this License 3 YOU MUST NOT a make copies of the Product except as expressly permitted in Section 2 of this License b translate reverse engineer decompile or disassemble the Product except to the extent the foregoing restriction is expressly prohibited by applicable law c rent lease loan sub license distribute assign or transfer the Product except as set out in Section 2 d above d modify the Product or merge all or any part of the Product with another program Introduction Software License Agreement 4 TERM This License shall
10. hall be severed from the License and the other provisions shall remain in full force and effect ay HI Introduction Features GARMIN Data Cards The USB Data Card Programmer utilizes GARMIN Data Cards Available in five sizes 8 MB Data Card 16 MB Data Card 32 MB Data Card 64 MB Data Card 128 MB Data Card Check the GARMIN web site or see your GARMIN dealer for availability of these data cards USB Connector 6 Ft USB Data Cable Mini Data Card Programmer Data Card Slot accepts only GARMIN Data Cards Data Card Programmer Installation of the USB Programmer and Device Drivers 1 Insert either the USB Data Card Programmer or MapSource City Navigator CD ROM into your computer s CD ROM drive It is important you insert the CD before you plug the USB Programmer into the PC If the MapSource program is open close the program Connecting the Programmer and 2 Connect the USB connector on the end of the Programmer cable Installing the Device Drivers to the USB port on the back of the computer Most computers have two USB Ports Either port should work The computer does not need to be turned off when connecting or disconnecting the USB Connector Programmer After connecting the Programmer to your computer fl you will need to install the device drivers from the CD ROM I 3 The computer will recognize the Programmer as a USB or unknown device and open the Add New Hardware Wizard and search fo
11. mer Change the need to be adjusted a ii un Hidden Files selection to Show All Files or Show hidden files and folders and uncheck the Hide file extensions for known file types or Hide protected operating system files then click OK 3 Be sure the driver CD is inserted and the USB Programmer is plugged into the PC Open the Control Panel For Windows 98 click on System then the Device Manager tab For Windows 2 2000 ME click the Hardware tab then click Device Manager 4 Find and highlight the incorrect Programmer entry on the Device Manager list click on Remove then click OK to confirm 5 Click Refresh then click Next to begin searching for the driv Installation ers On the next screen let Windows search by leaving the bullet on the Search for best driver option and click Next On the next screen check ONLY the CD ROM drive option and click i A Next Installing the Device Drivers 6 The Wizard will search for the driver and then display a window to tell you it is ready to install Click on Next You may see a Copying Files screen which tells you the file cannot be found Choose Root Directory of the CD ROM drive if not already there and to try copying again example d Click OK to continue 7 When installation is complete a window should display that shows the device name GARMIN USB Data Card Progr
12. nd operation of this and other GARMIN products GARMIN and StreetPilot are registered trademarks MapSource is a trademark of GARMIN Corporation and may not be used without the express permission of GARMIN Corporation Windows 95 Windows NT Windows 98 Windows ME and Windows 2000 are registered trademarks of Microsoft Corporation July 2001 Part Number 190 00201 00 Rev B Printed in Taiwan FCC Compliance Registration FCC Compliance This device complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE home or office interference requirements are more stringent than outdoor requirements Operation of this device is subject to the following conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The USB Data Card Programmer does not contain any user serviceable parts Repairs should only be made by an authorized GARMIN service center Unauthorized repairs or modifications could result in permanent damage to the equipment and void your warranty and your authority to operate this device under Part 15 regulations Registration Help us to better support you by completing our on line registra tion today Connect to our web site www garmin com Look for the Product Registration link on the Home page Why should you register your USB Data
13. onnector from your computer You do not need to turn the computer off before removing or inserting the USB connector Installation Installing a Data Card in the Programmer Extractor Handle k Disconnecting the Programmer from Your Computer Trouble Shooting Symptom Trouble Shooting Guide Probable Cause Remedy Windows does not recognize that the Programmer has been connected to the computer USB Connector is not properly inserted into the USB port on the computer USB Port on your computer is not prop erly configured Be certain the Programmer has been properly connected to your computer Consult your computer supplier When preparing to transfer data a No compatible device available message appears When preparing to transfer data a There is no data card in the Programmer mes sage appears System operating software is not USB compatible Programmer is not connected to USB port Card Programmer drivers are not installed No Data Card has been inserted in the Programmer The Data Card is not fully inserted into the Programmer Be certain the computer is operating on Windows 98 ME 2000 software Reconnect the USB Connector to the computer Install drivers Insert a Data Card into the Programmer Push the Data Card fully into the slot in the Programmer When properly inserted the card will protrude approximately 1 2 inch from the slot
14. ow will appear telling you that operating software for the Card Programmer is being installed Installing the Device Drivers 9 To make sure the USB Programmer has been successfully installed From the Control Panel click on System then the Device Manager tab then click the by Universal serial bus control ler You should see Garmin USB Data Card Programmer on the list Another method would be to open the MapSource program click the Save To Device icon then the USB Port tab You should see Card Programmer listed in the Save Maps To window A If you see a yellow mark in front of the device name install appears at the end of the Programmer name or the Programmer appears under Other Devices as an unknown device follow these alternate steps to install the Programmer The required driver files which the USB Data Card Programmer needs to find on either the USB Data Card Programmer CD or the City Navigator CD are 1 Double click the My Computer icon from your Desktop For Win grmn0200 inf dows 98 click View Folder Options then the View tab grmn0200 sys For Windows 2000 ME click Tools Folder Options then the grmn1200 sys View tab I these files cannot Dh oor Be u 2 Make note of the following changes if you wish to change your CD using Windows Explorer your View settings may i A A View settings back after installing the Program
15. r the device drivers Click on Next If for some reason the Wizard does USB Port not run automatically click the Start button and select Settings and then Control Panel Double click on the Add New Hardware Installation Programmer Cable USB Universal Serial Bus Port and USB Connector icon 4 The next screen will ask you if you want it to search for the best driver for your device or if you want to display a list to choose from Select Search for the best driver for your device and click on Next 5 The next screen will display a list of locations to search for the new Use care to insert the USB connector correctly Do not drivers Select CD ROM Drive from the list and click on Next Jorce the connection as this may damage the USB port Make certain all other boxes remain unchecked on your computer or the USB connector on the Pro grammer 6 The Wizard will search for the driver and then display a window to tell you it is ready to install Click on Next You may see a Copying Files screen which tells you the file cannot be found Choose Root Directory of the CD ROM drive if not already there and to try copying again example d Click OK to continue 7 When installation is complete a window will display that shows the device name GARMIN USB Data Card Programmer and states the Installation driver installation is finished Click on Finish 8 A final wind
Download Pdf Manuals
Related Search