Home

PeakTech® - DMTrade.pl

image

Contents

1. Also this file format is very user friendly if you consider using self written software which evaluates the data Language The language is automatically selected depending on your operating system However here you have the option to use the DMM Tool in another language Exit Exits the program with a warning for possible loss of unsaved readings Page 10 of 20 Peak Tech DMM Tool Connection e Device XXX You need this menu to select your desired meter For more details please refer to device selection in this guide e Connect This menu option connects or disconnects your meter to the PC Depending on the meter you may have to select the correct COM port For some devices the data transfer must firstly be activated by pressing a special key You can find detailed information about this in the manual of the instrument e Connect to Server and Start Network Server Please refer to the chapter Network Server Advanced In this menu you can make different settings for Triggers Please refer to the chapter Trigger to get more information Remote Control This menu item is only visible for those instruments which can be operated remotely Here you can remotely control the meter change measuring ranges and types get detailed information Since these menu items are highly dependent on the used meter this function is not described here Pause This menu item pauses the recording of the data until you click again o
2. do not require a separate driver as this is already integrated in Windows and works immediately So don t be surprised if your device driver is not listed You are free to choose the destination folder but it is it advised to remain at the default setting In the third step the DMM Tool and the selected drivers amp manuals will be copied to your computer Also the DMM Tool will be specially optimized for your computer This may take up to one minute please be patient In the fourth and last step you can choose whether you want to create shortcuts to the DMM Tool By default Desktop and Start Menu are selected Page 4 of 20 PeakTech DMM Tool aj PeakTech DMM Tool Installation completed You can now choose to create shortauts for DMM Tool Create shortcuts in your startmenu recommended Z on your desktop Uninstallation The uninstallation is done as with any other program using the Windows Control Panel Uninstall PeakTech DMM Tool This installer helps you to remove this If you click on yes any files related to PeakTech DMM Tool will be removed including shortcuts drivers and manuals Do you really want to remove this application Page 5 of 20 PeakTech DMM Tool Quick Start Start the DMM tool First you need to select the device you want to use Device PeakTech 2025 N Connect Connect to server Start network server Average total Average imin P
3. is recommended but not required You can also start the DMM Tool directly from the CD To install the DMM Tool insert the included CD into your computer and start the Setup exe Here you will be guided through each step of the installation In the first step you can select your language This is automatically done based on the language of the operating system if supported Page 2 of 20 PeakTech DMM Tool rt PeakTech DMM Tool Setu PeakTech DMM Tool Installation process of PeakTech DMM Tool The installation is optional You can run the application directly from the CD too Please choose your language first Language In the second step you can choose which options you want to store on your computer If a driver for your multimeter is required you will find these in the list It is advisable to check it so that the drivers can be found on your computer if you have not already installed the driver separately Also you can copy the user s manual for your device with this function Page 3 of 20 PeakTech DMM Tool Example for the PeakTech 3415 rey PeakTech DMM Tool Setu Choose components Please choose the components you want fo install and the location where they AN should be stored V PeakTech 3415 E PeakTech 3430 PeakTech 4000 7 PeakTech 4075 PeakTech 4090 C Program Files DMM Tool Some devices like the PeakTech 2025
4. the PC Select the point Network Server on the Connection menu Clicking this opens a dialog box where you can configure the server PS PeakTech DMM Toc A Start network server SAAGE ere you can start a network server so you can view the collected data from any ep computer inside your local network 3775 IP addresses for TOMMYB MAC 192 168 58 5 It is advised to keep the default settings Changes to those settings should only be performed by technically qualified personnel Then click on Start Server Start the DMM Tool at the second PC and click the below link Connect Page 14 of 20 Peak Tech DMM Tool 2 PeakTech DMM Tool Debug Build Connect to network server Con J ect Enter the hostname or ip address from the mE computer which runs DMM Too as server ke Host or IP 192 168 58 5 Port 3775 Detected DMM TOOL server TOMMYB MAC 192 168 58 5 3775 UDP 192 168 Here you can see a list of available DMM Tool Servers in your network Click the server which you want to connect to then click Connect If you have many measurement data it may take a while before the connection is established Trigger The Triggers are located under the menu item Advanced They serve to facilitate your analysis of the collected data for example by omitting results in long term measurements or by notification when a threshold has been reached Page 15 of 20 Peak Tech D
5. 3 2015 09 00 51 DMM TOOL 27 03 2015 09 00 51 27 03 2015 09 00 52 27 03 2015 09 00 52 27 03 2015 09 00 53 27 03 2015 09 00 53 Average total 1 093 5 Average 1min If you have a high amount of measurements it can take a while to open the detail view The graphical line chart also provides even more options You will see them if you click on the chart with the right mouse button Fl PeakTech DMM Tool Not connecte File Connection Advanced Pause Show Quality Show tooltips Copy image 27 03 2015 09 00 Save image 27 03 2015 09 00 48 27 03 2015 09 00 48 27 03 2015 09 00 49 Average 1min 27 03 2015 09 00 49 27 03 2015 09 00 50 Pe a k Tec h 27 03 2015 09 00 50 27 03 2015 09 00 51 DMM TOOL 27 03 2015 09 00 51 27 03 2015 09 00 52 27 03 2015 09 00 52 27 03 2015 09 00 53 27 03 2015 09 00 53 Average total 1 033 AAAAAAAAAABAAA e Display Here you can define which data is displayed in the chart In A each collected Page 9 of 20 Peak Tech DMM Tool measured value is displayed in 1 Minute only the data of the last 60 seconds is displayed etc Quality Relevant if your computer is a bit older or you are performing a long term measurement with very many recorded samples In the highest quality each measured value is marked in the chart often not needed for many measurements very slow At Normal quality standard the DMM Tool itself selects a number
6. 9 20 10 06 2015 20 29 21 10 06 2015 20 29 21 10 06 2015 20 29 22 10 06 2015 20 29 22 me sN w iS e S es BBE to es LJ 4 Automatic Trigger This trigger offers you the opportunity to wait for a certain event similar to the Alert Trigger Only when this event occurs readings are recorded before all measurement values are ignored and not logged Setup trigger You can set up a value here which starts logging values All samples are dropped until this value is reached Current value 17 C Page 17 of 20 PeakTech DMM Tool Range Trigger Allows you to select a specific range for example 10 C 20 C of measurement values that are recorded Readings outside this range will be discarded and not logged P amp PeakTech DMM Too Setup range Here you can setup a range for data that will be logged Vales outside this range will be ignored Interval The interval trigger allows you to control the number of recorded measured values So you can specify for example that only 1 reading every 5 minutes will be saved This is useful for long term measurements Pt PeakTech DMM Too Here you can set up an interval Ars min sec where measurements are logged 00 00 05 Page 18 of 20 Peak Tech DMM Tool Time Range The DMM Tool gives you the ability to record data only in a specific time range as for example between 10 00 am and 12 00 am All measured value
7. DMM tool is executed from CD or if the drivers and instruction manuals have been copied to your harddrive see chapter Installation you can also directly install the necessary drivers or view the manual Page 12 of 20 PeakTech DMM Tool PS PeakTech DMM Too Select noose device Here you can choose the device you want to use On the right you wil see a picture of it too Hand multimeter PeakTech 2025 PeakTech 3315 PeakTech 3430 PeakTech 4390 Table multimeter PeakTech 4075 PeakTech 4090 Install driver for PeakTech 3415 Open manual for PeakTech 3415 Network Server You can use the DMM Tool over a network such as WiFi Example scenario In your garage is placed a PC with a connected PeakTech 2025 This device measures the power consumption of your car battery You can now start a network server in the DMM Tool at the measuring PC and access it from another PC on your network for example the laptop in your living room so you will see directly the same what is Shown at your PC with the connected meter previously collected data as well as any new data displayed same as on the meter This naturally presupposes that both computers are connected on the same network and also access is allowed through the firewall The DMM Tool is using the port 3775 UDP AutoDiscovery and 3775 TCP Data Connection Page 13 of 20 PeakTech DMM Tool To start a network server first connect the multimeter to
8. MM Tool Alert This function allows you to set a specific value for the activation of an alert Once this is reached or exceeded higher or lower than it will show an alert window PEJ PeakTech DMM Toc Setup alert You can set up a value here which creates an alert Feature disabled Same or higher than always Same or higher than rising edge Lower than always You can define whether the alarm is triggered every time as soon as a measured value exceeds the set range drops below or only when the measured value increases rising edge or decreases falling edge Manual Trigger This feature gives you the option to record readings only by pressing a button rather than as usual permanently as soon as the multimeter sends a new value The button to record the current measured value can be found in the application window on the lower left Press this softkey and a new measured value is stored in the data table Manual trigger set Click here to log current entry Page 16 of 20 PeakTech DMM Tool A PS PeakTech DMM Tool Connected File Connection Advanced Remote control Pause 11 6 f AABAABAABAAAA SF Time ge 16 7 C 10 06 2015 20 29 16 18 C 10 06 2015 20 29 17 ze ge oo w 10 06 2015 20 29 17 Average total 17 363 10 06 2015 20 29 18 Average 1min 17 428 10 06 2015 20 29 18 10 06 2015 20 29 19 Pea k Tech 10 06 2015 20 29 19 ee 10 06 2015 20 29 20 10 06 2015 20 2
9. PeakTech Pruf und Messtechnik Spitzentechnologie die berzeugt r nN Milli irn o l 5 ur J 4 of SEC D E Z mu ma u PeakTecf bmmToo VELLEL Software for PeakTech Digital Multimeter Peak Tech DMM Tool Content CONE Ea A A E E O EATE are 2 CAO eea E EEE EEE AE EEE EE A EEE 2 G EAO orr ea re ceiien 5 ACK SEA Eee ee ee ee ee are 6 Graphical User INtettac ee rear 8 INES ee ea ee Eee ana 8 Nine EINE CWI en era mare an ea see 8 TE PH ana ne a De ann sobre EEE Lern En DPD DE 10 FANS ee a ee nee een 10 COMM CCH Or ee a a we a a Dee E 11 PONV ANCCC HEUER EREEFERGEN 11 RENIOL CE ON Ol r e A a 11 POSS E ee EEE EEE En De EEE En DEREN RT EN DER 11 Op aoatie diab vaaoenduapbebduwnneasaamens Gadus dened EE E EEE T E A 11 OO en bie re een 11 DEVICE SEC OM ceeacanaescetaaaesautaswaratsmeresansuaaepnenggawetanaateatncniassaceures mace moretie 12 NELWOLK SOI CP een einer 13 TAOCE versaute 15 PACT rinses eas satus taaepean denser saswiGs eave een E E E E nates Gavan seeuaauee bates ae E 16 ManuslIrigger sans ae ee a a ae ae 16 AUNSMESUC INGE aa ee ira 17 Range MOOS riesen anne 18 ia ES NE EEE TET REIF EEEINEERIEN 18 TINS RINGE nennen ee ae en ENA 19 Updates and VersionS s sasssasssasnsnsnnnsnnnsnnnnnnnnnnnnrnnnrunarnnnrasasnsnensnsnnnsnannnannn 19 SVC een 19 Installation You can install the DMM tool on your computer So you always have access to it even if you just don t have the CD at hand This
10. eak Tech DMM TOOL In this window you can also install the device driver or open the device manual in PDF format if you have executed the DMM Tool directly from CD or have included them during the installation process Page 6 of 20 PeakTech DMM Tool PS PeakTech DMM T Choose device select Here you can choose the device you want fo use Hand multimeter PeakTech 2025 PeakTech 3315 PeakTech 3415 PeakTech 3430 PeakTech 4390 Table multimeter PeakTech 4075 PeakTech 4090 No driver required for PeakTech 2025 No manual found for PeakTech 2025 Select your device and click OK to confirm Then under Connection click Connect You may need to specify a COM port depending on the meter For devices that do not require a driver this is unnecessary Page 7 of 20 Peak Tech DMM Tool PS PeakTech DMM Tool Not c Device PeakTech 4075 File Advanced Pause Connect LAN Connect to server COMI Kommunikationsanschluss COM2 Kommunikationsanschluss COM4 Standardm gige Seriell Gber Bluetooth Verbindung COM8 Standardm gige Seriell ber Bluetooth Verbindung Start network server Average total Average 1min Peak Tech DMM TOOL Not connected Please connect the device Once the connection is successful the DMM Tool receives readings and displays them accordingly Please do not forget that you may need to activate the data transfer of
11. n the pause button At the bottom left you will see a notification when logging is paused The measurement display left side is not affected by this Here you can open the Help this file and view information about this application Log The Log window displays all recorded readings including the time when they have been recorded It will always be scrolled to the end automatically to the most recent entry but you can always scroll up and this function will be disabled To activate the automatic scrolling again either scroll all the way down to the latest entry or use the menu right click on the log window and click Auto Scroll Page 11 of 20 PeakTech DMM Tool 173219 27 03 2015 09 00 47 173220 27 03 2015 09 00 48 o r 27 03 2015 09 00 48 uae za 173222 X 4 Auto scroll Average 1min e Clear selection PeakTech een en DMM TOOL 173228 27 03 2015 09 00 52 173229 27 03 2015 09 00 52 173230 27 03 2015 09 00 53 173231 27 03 2015 09 00 53 Average total Here you can activate the auto scroll function remove the selection or store the selected entries separately as a file see Save File Device Selection In this dialog you can select your meter which you want to use On the right is a picture of the selected multimeter Clicking on it takes you to the PeakTech homepage where you will get more detailed technical information such as measuring ranges and accuracy for this device If the
12. of displayed measured values for example each third in order to ensure a balance between performance and display quality On Low quality the number of measured values is limited similar to the Normal view but in addition it also disables anti aliasing as well as filling the graphic This is recommended for older computers Show Tooltips Once you move your mouse cursor over the chart you can see the measured value from the point where the mouse cursor is located You can use this option to activate deactivate this feature Copy image and Save image You can copy the chart either to the clipboard as an image to paste it into a program of your choice or save the chart directly as an image file The Menu File In this menu you will find options to load or save your data New This will delete all previously collected data from the log and graph just as if you have restarted the DMM Tool Open You can reload previously stored readings only xm format to view it in the chart and log Also you can open log files generated by the measuring instrument if the meter supports this function Save Already collected measurement values can be saved in various formats The txt format is most suitable for the human evaluation whereas the csv format can be imported easily in spreadsheet programs like Microsoft Excel or OpenOffice You can open previously saved data in the DMM Tool if they are stored in xm format to review the data
13. s outside this time range are discarded and not logged The time is controlled by the system clock ri Ps PeakTech DMM Toc Setup time region Here you can setup a time range where data mil be logged Values outside this range will be ignored 10 00 00 12 00 00 Updates and Versions You can find new versions of the DMM Tool occasionally at our homepage www peaktech de Service If you have technical questions please contact us via e mail or phone Please use our contact information listed below PeakTech 06 2015 Bau Ehr PeakTech Pr f und Messtechnik GmbH Kornkamp 32 DE 22926 Ahrensburg Germany T 49 0 4102 42343 44 49 0 4102 434 16 CJ info peaktech de www peaktech de Page 19 of 20 Peak Tech DMM Tool Page 20 of 20
14. the multimeter RS232 USB PC Link button Please read how to do it in the respective user s manual This can vary depending on the model of multimeter Graphical User Interface The graphical user interface is divided into 2 areas The LCD The LCD is an approximate replica of the display of your multimeter So you can see on your PC what you would see on your multimeter Below you will see not only the current value and minimum amp maximum values but also averages of the active data recording time The left area the LCD and the display of values is always live therefore not affected by any triggers set see chapter Trigger and runs even during the pause mode The Line Chart The graphical line chart displays all recorded readings in an automatic scale If you want to appear only a part of the measured data click with the left mouse button at the starting point gt hold mouse button gt drag a selection box to the desired end point Then you are in the detail view so you only see the selected area This Page 8 of 20 PeakTech DMM Tool area is also automatically selected in the log You can find more about the log area referring to the Chapter Log PSY PeakTech DMM Tool Not connect File Connection Advanced Pause 27 03 2015 09 00 47 27 03 2015 09 00 48 27 03 2015 09 00 48 27 03 2015 09 00 49 27 03 2015 09 00 49 27 03 2015 09 00 50 Pe a k Tec h 27 03 2015 09 00 50 u 27 0

Download Pdf Manuals

image

Related Search

Related Contents

Anwenderhandbuch Bewerberportal (en) mit  E-techW Installation Manual  KADVC12XXXA User Manual  L1951 Flat Panel Monitor User.s Guide  Toshiba TLP-X10U Projector User Manual  F。rY。ur - 三和システムサービス株式会社  2004 Cremona - VAS FVG Alto Livenza  SP60 Serie  - BitGravity  merci d`avoir acheté une montre nautica, développée selon une  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.