USER MANUAL - Mega Systems
Contents
1. Mechanical Specifications DMX Connectors Neutrik 3 pin XLR NC3FXX HD D and NC3MXX HD D IP 67 connectors in and out Power connection Nema 5 15 Thermal Maximum ambient temperature 104 Maximum surface temperature 140 Fastening System Dual Yoke Display Digital Lens Angle 162 11 85 5 75 w cable Size 10 25 x 11 85 x 5 75 Size 13 5 x 11 25 x 7 5 Weight 71b Weight 8 75lb Electrical Specifications LED Quantity 18 Tri Color LED s Red Green Blue LED Watts 3W LED Lifetime 40 to 80 thousand hours average Refresh Rate 6000 Hz Power Input Voltage 110V 240 50 60 Hz Ballast Electronic auto switching Power Consumption Watts 57 Amps 75 Control amp Programming Protocol DMX 512 DMX Modes Mode 3 Channels R G B Mode 4 Channels Dimmer R G B Mode 6 Channels Dimmer R G B Strobe Macro Control Options Display preset setting Main Power Connection Caution 1 Do not connect fixture to a dimmer system 2 This unit has Auto switching power supply It will respond to 110V or 220V automatically This unit must be earthed electronically grounded The occupation of the connection cable is as follows This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to 60Hz Cable USA Cable EU 110V 220V N DMX 512 Connection The fixture is equipped with Neutrik NC3FXX HD and NC3MXX HD2. USER MANUAL Table of Contents Safety NOM isaviescegedadeach uke cease ddeetaned ca harddagodauaniad dea eaa dh dieadedadaenteae cde SPECHICALIONS ciar A danes ia Main Power CONNECtION ooocccocccccnccococcconncnnnncnnnnnnnnnnnnnnnnnnnnrnnnnnnnnnnnenrnnninnanenanins DMX 512 ComectiON siii a td ct codes Main Control Men DMX Profile ic do oo so s Rigging the Fixture unicornio avaebarkeetedia uch Cleaning Parts List amp Maintenance icicitet ice ke ee ee nee ees Check that the unit has not been damaged during transport Read all cautions and warnings prior to operation of this equipment Protection Against Fire Fire Maintain a minimum of 1 foot distance from any type of flame Replace fuse only with the specified type and rating Do Not install the unit to close to a heat source Make sure cable are properly secured Maximum surface operating temperature 140 DAR Protection Against Electrical Shock AN Electrical Disconnect power before servicing For connection to main power supply proceed to page 5 This unit must be earthed electronically grounded This unit is IP 65 rated do not submerge unit into water Protection Against Mechanical Hazards 1 Use safety chain when hanging unit acs 2 Use quality clamps or bolts when positioning unit 3 Do not open unit while it is on risk of electrical shock Mechanical Technical Information Part Numbers 7221 Outshine T54
3. IP 67 3 pin XLR Sockets for DMX input and output The sockets are wired in parallel Only use a shielded twisted pair cable designed for RS 485 and 3 pin XLR plugs and connectors in order to connect the controller with the fixture or the fixture with another DMX input DMX output 1 Shield e 2 Signal 3 Signal Caution At the last fixture the DMX signal needs to be terminated with a terminator Solder a 120 Ohm re sistor between the and the signal into a 3 pin XLR plug and plug it in to the last fixture on the signal run Pre manufactured terminator plugs are available for purchase from your Mega Lite dealer P DMX T Display Menu CONTROL BOARD DMX Ad DMX Mode Red Dim Green Dim oe FI l a Ora trozo wer a roo mL 000 0 0 255 00 15 00 15 0 3 Mode Up Down Enter 1 512 3 Ch 0 255 0 255 4 Ch 6 Ch Press Mode to select the display options DMX Address Press Enter to select the DMX start channel use the up down keys display will be flashing once you have selected the desired start channel Press Enter to confirm display will stop flashing AS TIT DMX Mode This function allows you to select the mode in witch you want to control the Arc 90 Press Enter use the up down keys to select desired DMX mode settings Press Set Up to confirm the settings Red Green Blue Dimmer Red Green Blue Dimmer Red Green Blue Strobe Macro Red Dimmer This function all
4. ass 7220 KN Knob Set Warranty Information Warranty Conditions Unless otherwise stated in writing your product is covered by a one year parts and labor limited warranty LEDs are not guaranteed to match in color temperature or output It is the owner s responsibility to furnish receipts or invoices for verification of purchase date and reseller or distributor If purchase date cannot be provided date of manufacture will be used to determine warranty period Goods returned under warranty must follow the proper authorization procedure and must be accompanied by a copy of the original invoice and Return Authorization Number given by MSI Goods repaired under warranty will be returned to the owner with the freight prepaid by MSI via the most economical means of shipment Repair or replacement as provided for under this warranty is the exclusive remedy of the consumer MEGA SYSTEMS INC makes no warranties express or implied with respect to any product and Mega Systems specifically disclaims any warranty of merchantability or fitness for a particular purpose Mega Systems shall not be liable for any indirect inci dental or consequential damage including lost profit sustained or incurred in connection with any product or caused by product defect or the partial or total failure of any product regardless of the form of action weather in contract tort including negligence strict liability or otherwise and weather or not such dama
5. ge was foreseen or unforeseen Warranty is void if the product is misused damaged modified in any way or for unauthorized repairs or parts This warranty gives you specific legal rights and you may also have other rights which vary from state to state MEGAGH Mega Lite 5718 Kenwick St San Antonio TX 78238 Ph 210 684 2600 Fax 210 855 6279 www mega lite com info mega lite com
6. it 0 255 3 LED Color Blue LED Intensity 0 255 DMX Chanel Function Description Value 1 Dimmer Dimmer Off to Full 0 255 2 LED Color Red LED intensity 0 255 3 LED Color Green LED Intensit 0 255 4 LED Color Blue LED Intensit 0 255 5 Strobe Strobe slow to fast 0 196 Random Strobe slow to fast 197 255 No Function 0 1 Color fade slow to fast 2 19 Color Snap slow to fast Random slow to fast Yellow Purple 80 99 6 Macro Aqua 100 119 Orange 120 139 Red Pulse 140 159 green Pulse 160 179 Blue Pulse 180 199 Yellow Pulse 200 219 Aqua Pulse 220 229 White Pulse 230 249 White LED Full 250 255 Rigging the fixture Caution 1 The installations must be carried out by an authorized dealer or trained professional 2 Unit may cause severe injures if you have doubts concerning the safety do not install 3 Unit is to be 24inches away from flammable materials decoration material 4 Use high quality installation equipment to hang unit When rigging a unit it is very important that you follow common safety procedures Rigging requires extensive experi ence including but not limited to calculating working loads material being used and periodic safety inspections If you lack these qualifications do not attempt the installation yourself instead use a professional structural rigger When rigging the unit always be secured with a secondary safety attachment The installation location of
7. ows you to dim up or down the red LED s Press Enter use the up down keys to select desired dimmer settings Press Set Up to confirm the settings Green Dimmer This function allows you to dim up or down the green LED s Press Enter use the up down keys to select desired dim mer settings Press Set Up to confirm the settings Ji Blue Dimmer This function allows you to dim up or down the blue LED s Press Enter use the up down keys to select desired dimmer settings Press Set Up to confirm the settings Flash This function allows you to strobe the LED s Press Enter use the up down keys to select desired flash settings Press Enter to confirm the settings C A IIL Fade Scroll This function allows you to fade the LED s from one color to another Press Enter use the up down keys to select de sired fade speed settings from 0 to 15 Press Enter to confirm the settings Dimming Speed Press Enter to select the desired dimming speed Use the up down keys to select desired dimming fade speed settings from 0 to 3 Zero speed will be the fastest Press Enter to confirm the settings Outshine T54 DMX Profile 3Ch DMX Chanel Function Description Value 1 LED Color Red LED intensity 0 255 2 LED Color Green LED Intensit 0 255 3 LED Color Blue LED Intensit 0 255 DMX Chanel Function Description Value 1 Dimmer Dimmer Off to Full 0 255 2 LED Color Red LED intensit 0 255 2 LED Color Green LED Intens
8. the fixture has got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming Installation should be checked at least one time a year by a skilled person Cleaning and Maintenance Installation Maintenance The operator has to make sure that the unit is operating safely and has the installa tions and electronics checked by an expert every year The following points have to be considered during the inspection 1 All screws used for installing the device or part of the device have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing fixation and installation spots ceiling suspension trussing 3 The electronic power supply cables must not show any damages material fatigue e g porous cables or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed Note There is no serviceable parts inside the device except for the LED s Maintenance and service operations are to be carried out by authorized dealers Replacing the fuse Only replace the fuse with the same type and rating Replacing the power cable If the power cable of this device becomes damaged it has to be replaced by author ized dealers or trained professional only Should you have further questions please contact your dealer Parts List 7221 LEDMOD LED Module 7221 FG Frontal Gl
Download Pdf Manuals
Related Search