Home

User Manual

1. User Manual Part Number E27 VCT6 MZ superirightieds con Important Read all instructions prior to installation Wi Fi Compatible VCT LED Bulb with Multi Zone RF Remote Parts Included 1 2 4Ghz Wi Fi Compatable VCT LED E27 Bulb 1 2 4Ghz Sync able RF Mult Zone Remote Wireless Remote 1 Master On Off O Acts as a master On Off O control for all zone linked VCT lights Also activates the Master function which allows the remote to control VCT lights in all zones If a zone is currently active pressing the master On button restores the Master function to the remote 2 Light Temperature Controls Left Warm Right Cool Increases left button or decreases right button the light temperature level between warmer yellow and cooler white light 3 Brightness Controls Top Increase Bottom Decrease Increases top button or decreases bottom button the brightness level 4 Selection LED Indicator Flashes once to indicate when a command has been selected VCT LED E27 Bulb 86 265V 7 Zone On Off O Zones 1 4 Allows up to four zones i e channels of VCT lights to be separately linked and controlled by the remote Pressing one of the Zone On buttons activates that zone commands will affect only lights in that zone Once linked to a zone lights remain linked until they are unlinked Voltage V Lifespan h Frequency Hz LED Power W lu
2. ed to that zone Unlinking a Light to the Remote 1 Determine which zone the light is linked to This is easily done by testing the Zone On Off controls for each numbered zone on the remote 2 Switch off the main power supply to the light 3 Restore power and within 3 seconds choosing one of the Zone On buttons until the light flashes 10 times indicating that the light has been unlinked An unlimited number of VCT lights can be linked to a zone All the lights linked to that zone will display the commands entered on the wireless remote Conversely a single VCT light can be linked to multiple remotes When VCT light is unlinked it will be unlinked to all remotes Note The wireless remote operates using radio frequency The remote controller s use is not restricted by normal obstructions such as walls doors etc Once programmed they can be installed anywhere in range of the remote up to 65 ft or 20m 4400 Earth City Expy St Louis MO 63045 866 590 3533 superbrightleds com
3. minous flux Lm Light effect Lm w 50 60 PF cos 50000 0 65 Current mA 35 65 Max length mm Color temperature K 2700 6500 E26 E27 B22 Lamp base Set Up Instructions Safety Install 2 AAA batteries not included in the wireless remote With power turned off screw the VCT bulb into a socket Turn power on and wait until VCT bulb illuminates If bulb does not illuminate check socket and power connections The VCT bulb is ready for linking to the wireless remote ROPS DO NOT use with wall dimmers relays or other control circuits DO NOT install with power applied to socket DO NOT uexpose the remote or bulb to direct or indirect moisture Linking Lights to Remote Zones VCT LED light bulbs are controlled exclusively through the multi zone RF remote Use the following procedures to establish remote links and send commands Linking a Light to the Remote 1 Switch off the main power supply to the light Zone 2 Restore power and within 3 seconds choosing one of the Zone On buttons keep the button depressed until the light begins flashing It will flash white 2 times indicating that the light is now linked to that numbered zone control and can be controlled via the zone o wireless remote Activating a Zone To activate a specific zone depress the Zone On button The zone is now active and remote commands will only affect lights link

User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents