User Manual
Contents
1. 10 DE BY PRO JECT AUDIO SYSTEMS INSTRUCTIONS FOR USE Pro Ject CD Box DS Dear music lover thank you for purchasing a PRO JECT AUDIO CD Box In order to achieve maximum performance and reliability you should study these instructions for use carefully V Warning of a hazard for the user the unit or possible misuse nes Important notice Caution Laser diode discs to avoid safety instructions This product contains a laser diode of higher class than 1 To ensure continued safety do not remove any covers or attempt to gain access to the inside of the product Refer all servicing to qualified personnel If a disc is cracked chipped warped or otherwise damaged dont risk to play it You could end up damaging the unit This player is designed for use with fully circular full size CDs only Use of shaped discs is not recommended The manufacturer and the distributor disclaims all liability arising in connection with the use of damaged or shaped discs AC outlet voltages vary from country to country Before connecting to the mains make sure that the voltage in your area meets the voltage requirements printed on the power supply The power supply is used to disconnect the unit from the mains Make sure that the power supply is easily accessible at all times Never handle the device the power supply while your hands are wet or damp Avoid letting liquids enter the device or the power supply Never place any item containing liquid2. ect CD Box DS Revision 2013 1 15 Replacing batteries Proceed as follows e Unlock and slide open the battery case cover e Replace the battery Make sure the battery is the right way round e Close the battery case cover Battery type 1 x CR2032 3V or 1 x CR2025 3V Do not dispose the batteries as ordinary domestic refuse Please dispose your exhausted batteries at the appropriate collection sites usually located at supermarkets and drugstores Technical specifications Pro Ject CD Box DS Supports CD CD R CD RW and Hybrid SACD Frequency response 20Hz 20kHz 0 15dB Noise floor gt 103dBA THD lt 0 01 Line level output 1 pair RCA phono sockets Output voltage max 2Vrms Digital output 1 x co axial S PDIF D A converter Burr Brown PCM 1796 24Bit 192kHz 8 times oversampling Outboard power supply 18V 1 000mA DC suitable for your country s mains supply Power consumption 330 600mA DC lt 1W in standby Replacement battery remote control 1 x CR2032 3V or 1 x CR2025 3V Dimensions W x H x D D with sockets 206 x 72 x 194 200 mm Weight 2 670g without power supply Service Should you encounter a problem which you are not able to alleviate or identify despite the above information please contact your dealer for further advice Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country Warranty The manufacturer accepts no responsibility
3. for damage caused by not adhering to these instructions for use Modification or change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the lawful rights of the customer Copyright PRO JECT is a Registered Trademark of H Lichtenegger The information was correct at the time of going to press The manufacturer reserves the right to make This guide was produced by Audio Trade GmbH changes to the technical specification without prior Copyright 2012 All rights reserved notice as deemed necessary to uphold the ongoing process of technical development Audio Trade GmbH Pro Ject CD Box DS Revision 2013 1 15 5
4. m will load the disc automatically The display shows the total number of tracks on the disc and the total duration of the disc A short press of the button E stops playback Pressing M again ejects the disc Dimming the display Press and hold the buttons E and gt gt I will change the display brightness full half and one third To access that function playback must be stopped Play l gt starts playback of the first track The display shows the current track number the elapsed time of the current track and the play icon Pause I gt pauses playback The display shows the current track number the elapsed time of the current track and the pause icon To resume playback press I gt again Stop A short press of the button E stops playback The display shows the total number of tracks on the disc the total duration of the disc and the stop icon Stepping between tracks Press the buttons M4 previous track or P next track Pressing M4 while playback the current track starts playing from the beginning The display shows the number of the tracks as you step the elapsed time of the current track and the step icon Scanning through the disc Press and hold the button M4 fast backward or PPI fast forward to scan through the disc The display shows the current track number the elapsed time of the current track and the scan icon Releasing K lt or PPI will take you back to playback 4 Audio Trade GmbH Pro J
5. such as a flower vase on or near the device Never spill any liquid on the device or the power supply Never place any naked flame sources such as lighted candles on or near the device The product shall not be used in damp or wet locations next to a bathtub sink swimming pool or any other similar conditions Connectors gt S PDIF Co axial Right Power CE sons E iS O OO xmm Out Pro Ject Audio Systems Vienna Austria oO V Make all connections whilst the CD player is disconnected from the power supply Take care to connect the left and right channels correctly The right channel is usually marked red the left channel black or white Never use any other power supply than the one supplied with the unit Connection to the amplifier Connect the Out socket to a line input such as AUX on your amplifier Connection to a external A D converter Connect the Digital output socket to a coaxial digital input on the D A converter or AV processor Doing so allows you to use the signal in its digital for further digital processing Mains power connection Connect the low voltage plug from the power supply to the Power 18V socket before connecting the power supply to the mains 2 Audio Trade GmbH Pro Ject CD Box DS Revision 2013 1 15 Remote control O Q To switch on from standby or to standby 0133 e D S turns the unit on or back into standby Volume control SS or adjust the sound volume of
6. your Pro Ject Audio amplifier TT T O a stops playback Play Pause 000 Selecting tracks A g E 4 9 10 1 and hd accesses a specific track directly and start playback 410 2 a amp 2 For example to play track 19 press hd and To play track 29 press a 4 ES and starts and pauses playback Stepping between tracks scanning through the disc 68 Press or The display shows the number of the tracks as you step Pressing while playback starts playback of the current track from the beginning HA bbl Press and hold the button M A for fast reverse scanning wo activates fast forward scanning Repeat and random play 0 Pressing the Y button repeatedly selects the repeat modes and random play The display shows CD repeat play for the current track EI repeat play for all tracks EE shuffle play a da Pressing again takes the CD player back to standard playback Audio Trade GmbH Pro Ject CD Box DS Revision 2013 1 15 3 Front panel controls A O gt L 44 bbl CD Box DS To switch on from standby or to standby The push button on the left hand side turns the power on or returns the CD player to standby mode The blue LED on the front panel shows that the unit is connected to the mains Inserting and ejecting a disc Switch the unit on from standby Insert the disc into the slot with the label side facing upwards The slot loading mechanis
Download Pdf Manuals
Related Search