Home

MH6-C USER`S MANUAL

1. With a mild detergent or alcohol remove all dirt and oil from the point of installation lay the wires down in the wire channels and fasten down with the double sided tape Tap screw Clean to remove a Oil and dust X Cutout for wires Wire Temporarily fasten the stays to the hood and for now fasten to the location with double sided tape Affix double sided tape to the bottom Nw of the stays and aa fasten down ERE With a marking pen make a mark for a wiring hole Tap screw Hole ree Remove the hood and tap screws ck 7 r Tap screw Or Tap screw With the stays still fastened remove the A pillar A piller Remove made in Open holes for the stays and for the wiring wire size that were 7 Drill etc hood to the stays wi Using the holes made in fasten ith the screws a Stay Stay LE Fy l Nida A piller Screw the hood back onto the stays As you are leading the wires replace the A pillar g Fasten the meter to the meter hood Fasten the supplied cushion tape to the meter case and fix the meter hood PIVOT CORPORATION Cushion tape The tap screws will make ridges as they are being 87 3 Shimookada Okada Matsumoto shi Nagano 390 0313 Japan screwed in but if closed too tightly they
2. LOi vor MH6 C As of July 2014 No 3 METER HOOD 60 Processing Ki MH6 C USER S MANUAL METER HOOD 60 Thank you for purchasing PIVOT METER HOOD 60 Processing Kit MH6 C Please read these instructions carefully before installing or using this device Please do not lose this user s guide as you will held liable for the cost of reissuing it fen OO 3 Sep Qe SS a Nuts small Hoods Fastening Stays Tap Screws Spring washers Bolts large Nuts large Double sided Cushion User s Unfinished Black x2 ne me x2 x2 x2 tapes x2 tape guide This Processing Kit allows you the user to cut Actual size of mounting side of hood process and paint the hood to match the installation surface for the perfect fit and style Please use this for making sure the installation position will X If you are unsure about anything please consult a work properly professional at your local dealer or consider buying our 65 Multi Purpose Type Preparation for process m Things to prepare Drill and Bit 3 5mm Compatible Gauges All PIVOT Gauges current models Other Gauges that are of the following size can Sandpaper also be installed Round File ine 2 Somena to write on plastic Spray Paint Convenient tool Router Belt sander Drill Press How to Process An Example EE Decide the Place of Installation A pi
3. ller l Make a trial installation To install to the A pillar it LA Try to choose a flat surface is necessary to drill a hole in the A pillar UD Top of the ma an gt ee Place of installation Place of installation steering column cover When deciding a place for installation make sure to x O A select a place that does not interfere with airbags standard measurement gauges nor gets in the line of vision 2 Process the Hood make necessary cuts to bottom of stand for a perfect fit to mounting surface and paint as desired Take the gauge out from the hood and slowly cut away spots that hinder a good fit Place of installation Make sure not to cut away too much so that the bottom of the gauge hits the Q installation point Spot the stays on the hood and mark the position of the holes with a marker Side of hood N N Stay Open a 3mm hole with its center about 2mm above the marked circle made in step Please take into account the thickness of the stays and the double sided tape E E 2 N V Open hole with center about 2mm J above A N The marked circle made in step Paint the hood surface 9 a hA EJ Fastening the Hood Installing with the Double sided tapes dashboard etc With screws fasten the stays to the holes made in the hood in FJ above Tap screw
4. may not hold if this happens please use the nuts and washers provided in the kit to securely fasten TEL0263 46 5901 Nut small http pivotjp com

MH6-C USER`S MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents