Home

HD-SDI Water-proof IR Camera - Hi-view

image

Contents

1. with the electrical safety regulations of the nation and region User Manual of SDI Water proof IR Camera When the product is mounted on wall or ceiling the device shall be firmly fixed A Cautions E Make sure the power supply voltage is correct before using the camera E Do not drop the camera or subject it to physical shock M OIf cleaning is necessary please use clean cloth to wipe it gently If the device will not be used for a long time please cover the lens cap to protect the device from dirt E Do not aim the camera at the sun or extra bright place A blooming or smear may occur otherwise which is not a malfunction however and the endurance of the device will be affected at the same time MN The device may be burned out by a laser beam so when any laser equipment is in use make sure that the surface of the device will not be exposed to the laser beam E To avoid heat accumulation good ventilation is required for operating environment User Manual of SDI Water proof IR Camera E Do not place the camera in extremely hot cold the operating temperature shall be 20 C 60 C dusty or damp locations and do not expose it to high electromagnetism radiation NM While on a delivery the camera shall be packed in its original packing or packing of the same texture E A few parts of the device shall be replaced regularly according to their average enduring time Regular checking is recom
2. 2 Mega Pixel HD SDI Water proof IR Camera User Manual Thank you for purchasing our product This manual is only applicable to SDI water proof IR cameras Some models of this series may support internal focal adjustment If the model you get doesn t support to adjust zoom and focus please skip the descriptions related to focal adjustment There may be several technically incorrect places or printing errors in this manual The updates will be added into the new version of this manual We will readily improve or update the products or procedures described in the manual The content is subject to change without notice User Manual of SDI Water proofIR Camera Instructions Before using the product please read this manual carefully to ensure that user can use the product correctly to avoid danger or property loss Please store this instruction manual in a safe place for future reference A Warning Input voltage should meet both the SELV Safety Extra Low Voltage and the Limited Power Source with DC 12V Please refer to technical specifications for detail information M Ifthe product does not work properly please contact your dealer or the nearest service center Never attempt to disassemble the camera yourself We shall not be responsible for any problems caused by unauthorized repair or maintenance E Keep away from liquid while in use E In the use of the product you must be strict compliance
3. SC or PAL Return Return to the previous interface or exit menu setup 15 User Manual of SDI Water proofIR Camera 3 9 Reset This function is reset all setups to the default status If parameters of the camera are out of order and the camera cannot display images you may use this function to reset all setups Please select Reset and press Enter button to go into its setup interface Then select Factory and press Enter button to reset all settings to the default factory settings Additionally you can also check up the version of the camera here Select Return to return to the menu setup interface Push left right to select Exit to exit the menu setup interface and return to the live interface The system will automatically save the settings Note If you shut down your device but don t exit the menu setup interface all settings set above will not be saved 16 User Manual of SDI Water proof IR Camera HD SDI Water proof IR Camera 1 3 CMOS 2010 H x 1092 V 1 25s or 1 30s 1 67500s 0 LUX LED ON Pixel Shutter Min illumination Resolution 1000TVLines Lens driver DC driver Camera f 6mm 4mm 8mm 3 3 12mm etc Lens White balance Day amp Night ATW indoor outdoor manual etc ICR 20 30m support BLC BLC HLC Area Level Offsetup Image adjust sharpness brightness etc Advance WDR adjustable Mirror rotate mir
4. ch kinds of camera please skip the steps of focus and zoom adjustment Before start please make sure that the wall or ceiling is strong enough to withstand 3 times the weight ofthe camera The mounting steps are as follows Step 1 Attach the drill template to the place where you want to fix the camera and then drill 3 screw holes and 1 cable hole if you want to route the cables through the mounting base according to the drill template User Manual of SDI Water proof IR Camera Step 2 Route the cables and connect the power cable and video cable And then secure the mounting base with camera to the ceiling or wall with screws YI moO a ie Step 3 Bracket adjustment Before adjustment preview the image of the camera on a monitor and then loosen the fixed ring to adjust O 360 Pan 90 Tilt User Manual of SDI Water proof IR Camera Loosen the fixed ring to adjust the panning position of the camera The adjustable range is from 0 to 360 Loosen the fixed ring to adjust the tilting position of the camera The adjustable range is from 0 to 90 After you adjusted tighten the fixed ring Step 4 Focus and zoom adjustment If the model you get is prime lens please skip this step Remove the lens cover and then adjust the focus and zoom screws to get a clear image Finally tighten these two screws and the lens cover Le
5. e use the fixed IRIS Lens This function can be used to shoot license plate number Select HSBLC and press Enter button to go into its submenu Select There are four areas Please push direction button to select Display Display the HSBLC areas There are four areas Push Enter button to setup the position and size Level Push left or right to increase or decrease Mode There are two modes All Day and night Black Mask Mask the highlight area Default Reset the setup of HSBLC to the default setting Select Return and press Enter button to return to the previous interface Select Return push right and choose exit to exit Menu 10 User Manual of SDI Water proofIR Camera 3 5 White Balance Select WHITE BAL and push left or right to choose White balance mode including ATW AWC SET Indoor Outdoor and Manual ATW In this mode the camera will constantly monitor the color temperature among about 2500 9500K of color temp and adjust white balance automatically This mode is prior to other modes AWC SET Select it and press Enter button to go into the lock mode of white balance Now the camera locks the reference value ofred and blue under the current color temperature and stops monitoring color temperature Indoor Indoor white balance mode Outdoor Outdoor white balance mode Manual When the camera is used in the environment with a certain unchangeable light source user can use this mode Select this mode and p
6. guage camera title motion privacy and defect setup Language There are three languages English CHTand CHS Camera title When selecting On the title edition and the position selection ofthe title is effective User can press the direction button to self define the camera name After selecting the single letter number or symbol please press Enter button to go into the camera title position setup User can push the direction button to set up Mirror Mirror the current image There are three kinds of mirror Rotate Mirror and Flip Motion Select Motion and press left right to select On Off Select On and press Enter button to set up motion e Select There are three areas to set up e Display Push right left to select On Off Select on and press Enter button to set its size and position e Sensitivity Push right left to adjust the sensitivity ofthe detection area e Motion view If enabled there will be some red square appearing when there are something moving 13 User Manual of SDI Water proof IRCamera e Default Reset all settings of Motion to the default value e Return Return to the previous interface Privacy Ifa user wants to mask some areas please select On and press Enter button to go into the privacy setup interface e Select There are 8 areas to select e Display Display the area size and position e Color There are 16 colors to select for the area e Default Reset all settings of Pr
7. ivacy to the default value e Return Return to the previous interface Defect Including Live DPC Level Static DPC Start and Level settings e Live DPC The default setting is Auto When selecting it the system will automatically check the defect point There is no need for you to set up the level Push left right to select On Off e Level Level of live Defect Point Correction e Return Return to the previous interface 3 8 Image Adjustment Select Image Adjustment and press Enter button to go into Image Adjustment menu 14 User Manual of SDI Water proofIR Camera User can setup 3D NR sharpness brightness Gamma blue gain red gain lens shading and NTSC PAL 3D NR Select it and press Enter button to go into 3D NR interface Select D NR level and push left right to increase or decrease the NR level in the daytime Select N NR level and push left right to increase or decrease the NR level at night The higher the level is the less the noise is Sharpness Select Sharpness to enter into sharpness setup interface Select N level and push left right to setup the value of sharpness at night Select D level and push left right to setup the value of sharpness in the daytime Brightness Push left right to setup the value of brightness Gamma Setup the value of GAMMA Blue Gain Push left right to increase or decrease the value ofred Lens Shading Push left right to select On Off NTSC PAL Press left right to select NT
8. mended for all users 1 1 1 2 1 3 3 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 9 4 Introduction 1 Package Content esise eieiei ae 1 Main Fe atuPes ccsnnoscnsicscenensasiesinaasenedcan van oni v a 1 OVE VIE PN ER RO RE ENE EN ENE 2 MnStallati OM pe enih kan tajen nale 4 Menu Setpro n EES 7 Power On Off ui ia tan na e nei ie kona aenn Ki Basic Operating Instruction 7 Lens Setup EXDOSUTE enoriou ennnen White Balance ev sssnsneocei ne drka 11 Day Ee ET 12 O DECA See ee Eege een jana 13 Image EEN 14 E EE 16 User Manual of SDI Water proofIR Camera This series of the camera adopt the latest 1080P CMOS sensor of Panasonic and support 1080P real time image capture and transmission with SDI video output port 1 1 Package Contents Please verify the package for the following contents and make sure that the device in the package is in good condition and all the assembly parts are included Amount Camera User Manual Template Screws 1 2 Main Features User Manual of SDI Water proofIR Camera Adopt high performance sensor and with high resolution up to 1080P whichbrings high guality images Support HD SDI video output Support High Light Control HLC which makes you see the image around the glare point more clearly Under low illumination condition reduce noise from brightness and color signal to save a l
9. ns cover Zoom Focus Step 5 Remove the protection film softly to complete the installation User Manual of SDI Water proof IR Camera 3 1 Power On Off Before starting connect with the power cables and video cables Please make sure all the connection is good After that the system will start Then press the OK button to pop up the setup menu Plug out the power cable and then the system will shut down immediately 3 2 Basic Operation Instruction SETUP LENS EXPOSURE WHITE BAL DAY amp NIGHT SPECIAL IMAGE ADJUST RESET User Manual of SDI Water proof IR Camera When enterring into the setup menu user can see the picture as shown above l means that there are submenus User can select and confirm the item by pushing the direction button and OK button Push up or down to select the item on the left column Push left or right to select the item on the right column Press the enter button to confirm the selection and enter into the submenu interface 3 3 Lens Setup Support manual IRIS and DC lens Please setup according to the use of lens User can select the lens type by pushing right 3 4 Exposure Exposure setup includes Shutter AGC Sens up WDR Defog and Backlight Shutter Options include auto 1 30 1 60 FLK 1 250 1 500 1 1000 x 2 AGC When the light is insufficient push left righ to setup User Manual of SDI Water proofIR Camera its level The default level is 6 Plea
10. ot of storage room Support Backlight Compensation which can adjust the iris so that the object in a sensitive area can be properly exposed Support DWDR function which make the image more clearer when the object is shot in the strong light contrast condition Support OSD control function which is convenient for user to adjust camera Support ICR switch Support privacy masking 1 3 Overview ae User Manual of SDI Water proof IR Camera E 1 a i 8 SS ea 9 10 1 Lens Cover 6 CVBS Video Cable 2 Sun Shield 7 HD SDI Video Cable 3 Fixed Ring 8 Power Cable 4 Mounting Base 9 Focus 5 Direction Key 10 Zoom Direction Key z Push the OK button up hereinafter referred as O Push up to make the cursor move up Push the ORK button down hereinafter referred as Push down to make the cursor move down Push the OK button to the left or right hereinafter referred as Push left right to select the left or right item Press the OK button to confirm the selection User Manual of SDI Water proofIR Camera Cable Connection Bb Monitor 4 Monitor DC12V Pi SDIDVR Some models ofthis series may not support to adjust focus and zoom If you get su
11. ress Enter button to setup User can adjust the level of blue and red by pushing left or right button to reach the reasonable results of white balance Return Select Return and press Enter button to return to the previous interface 11 User Manual of SDI Water proof IR Camera 3 6 Day amp Night Mode Three options Auto Color B W EXT The default mode is EXT mode Auto When selecting Auto the camera will change into color mode in the Daytime or B W mode at night so that user can get the best and clearest images Select Auto and press Enter button to enter into the auto setup interface Delay Control Setup Day Night switching time The default delay time is 5s Press Left Right button to control the delay time eDay Night Set illumination limits from color to B W Night Day Set illumination limits from B W to color Color Return to the Mode setup interface and press Right button to select this mode B W Select this mode and press Enter button to setup Burst Ifyou want to obtain the standard B W signal please select off EXT Ifthis mode is selected light resource and image will be changed synchronously as the change of the external environment Smart IR Select smart IR and press Enter button to set On off When the object with IR light is captured please enable it and then enter into its submenu for level and area setup 12 User Manual of SDI Water proof IR Camera 3 7 Special Special setup includes lan
12. ror flip Lens shading support Size 1080P 1920x 1080 Video Frame 30fps 60Hz 25fps 50Hz Port Video out 1 ch SDI 1 0Vp P 750hm 1 ch CVBS Power supply DC12V Working Temperature 20 C 60 C Environment Humidity 10 90 Dimension 109 284 17 450013000145 ad
13. se increase or decrease the level as required Sens up Extend the exposure time of camera The higher the time is the lower the frame is The shadow will be longer under the dark condition Please select times by pushing right as needed WDR Lighten the dark area and control the highlight area There are four options low middle high off Defog In foggy weather you can setup this function to see the object behind fog clearly There are four options low middle high off Backlight You can select OFF BLC or HSBLC by pushing right If OFF is selected the system will not compensate the image If BLC is selected it will enhance the brightness of image to satisfy the monitor effect To enter into the submenu of BLC press Enter button You can setup GAIN AREA and DEFAUT Gain The higher the level is the brighter the image is When selecting on the area position and size can be setup Push direction button to set the position of BLC area After User Manual of SDI Water proof IR Camera that press Enter button to setup the area size Push up or left to reduce the area but press down or right to enlarge the area If parameters of BLC setup are out of order please select Default and press Enter button to reset settings If HSBLC is selected the high brightness will be restrained and the low brightness will be enhanced at the same time As aresult the image ina certain area will be exposed properly Pleas

Download Pdf Manuals

image

Related Search

Related Contents

KEF PICOFORTE 3  PAC MANAGER™ USER'S GUIDE LEGACY EDITION  Manual do HAPE.zip - EngenhariaCivil.com  Sensidyne Gilian GilAir Plus Air Sampling Pump User Manual  EVK-STD-CARRIER SMARC Evaluation Carrier User`s Manual  Brother PT-2100VP  Produktprospekt  Philips bedroom air purifier AC4052  User Manual  Cam82U Gembird User Manual  

Copyright © All rights reserved.
Failed to retrieve file