OLM-46XX Bracket User Manual
Contents
1. k There are 4 different types of stand Please select a stand type as you need e ka STAND BRACKET om STAND FOOT USTER 4 FE EO HER BOLT M6 12 2EA BRE 9 MAIN FRAME MAIN FRAME 1EA ROUND HEADED Y AXIS LINK 1EA FIX BRACKET UNIT 1 WI BOLT M5 30L 4EA MAIN FRAME LINK FIX BRACKET EXTENSION BRACKET lH a 99 3 30 J 8mm 5mm 2 5mm 10mm 5 Hi ERE TOOL SET 1SET WRENCH fj a 3 USER MANUAL 1EA BP S as 1727 p E p 3 ES iln 73 850 0 850 0 950 0 1000 0 BOLT M6 45 WALL BRACKET 2EA ANCHOR BOLT 3 8 4EA NUT M6 2EA WALL BRACKET UNIT Nx2 Nx3 Nx4 Nx5 k In case of NX3 NX4 or NX5 set formations there is no stand bracket for the top line of main frames However it is designed to firmly fasten the main frames of the top line to the main frames of the next line SCREEN SIZE MM e e OLM 4610 OLM 4650 E E 1025 7 x 579 9 1025 7 x 579 9 2051 4 1159 8 2051 4 1159 8 X23 3077 1 x 1739 7 3077 1 x 1739 7 ed n 6mm 4102 8 x 2319 6 4102 8 x 2319 6 ALLEN WRENCH 5128 5 x 2899 5 5128 5 x 2899 5 STAND FOOT STAND SUP2. 580 0 1026 5 9kg 0 5kg 42 43 ORION PDP Infinitely Expandable M LC D MEMO MEMO 44 45
3. ORION PDP CO LTD www oriondisplay net Address 257 6 Gongdan dong Gumi si Gyeongsangbuk do Korea Tel 82 2 6678 8533 82 2 6678 8599 2010 12 14 MAIN FRAME USER MANUAL STAND UNIT WALL UNIT Thank you for purchasing our MAIN FRAME Please read through this user s manual for safety before installing this product This product is manufactured for Multi LCD model only Infinitely Expandable M LC D Contents 5 ACCESSORY 2 E OPTIONAL seen 2 o STAND UNT 3 T 4 25 Installing the sland 3 3 eoe eae ene ea Stan eua Ric 6 eur Deui Re E 16 4 Adjust the MLCD gap with the Adjuster sess 19 5 Setting ID configuration and Connection 3X3 20 WALL UNIT 21 ane anaa ia a Kak panga gagana ak 22 2 Checking the location for 24 3 Fixing Anchor and Bolt 25 4 Installing the Wall Bracket 3 X 3 26 Bo 37 6 Adjust the MLCD gap with the Adjuster 41 SPECIFICATION 42 Infinitely Expandable M LC D ORION PDP ACCESSORY MAIN FRAME Accessories STAND UNIT This manual describes the installation case for 3X3 sets
4. both Main Frames at the vertical axis is removed the brackets will e Fix both rows at the vertical axis as Y Axis Link to the right side of the Main Frame bracket for the e move from side to side Move the vertical axis at both sides to install the MLCD simultaneous movement of the vertical axis gt l EA lt Do not remove the supporting plate of the supporting axis e Connect the Main Frame and Y Axis Link Remove the screws of the supporting plate with M6 12 bolts using a 5mm allen wrench with a 5mm allen wrench Then remove the plate completely from the Main Frame 14 15 ORION PDP Infinitely Expandable M LC D 3 Installing the MLCD 1 Attach the PEG and Guide Pin to the MLCD 2 Install the MLCD from the lower part of the middle set Assemble the four PEGs at the back of MLCD Insert the PEGs in the PEG holes Install the Guide Pins where MLCD touches Putthe set down slowly The panels can be damaged by impact Install the MLCD from the bottom of both sides after completing the installation at the lower middle part m a e There is a hole for the installation of the Guide Pin at the upper part and the sides M5 30 If y
5. to assemble the upper and lower Main Frames and then assemble the adjacent Main Frame with M6 70 bolts e Repeat this process to assemble the Main Frame at the 3rd row M6 70 d M6 70 L WALL UNIT Assemble the figure using the enclosed wrench and 5mm allen wrench Assemble the figure using the enclosed wrench and 5mm allen wrench d s s ORION PDP 9 Assemble the upper part of the 3rd row with M6 40 bolts Assemble the Main Frame and Wall Bracket at the upper part and the lowest row with M6 40 bolts M6 40 M6 40 Assemble the figure using the enclosed wrench and 5mm allen wrench 34 Infinitely Expandable M LC D 1 Remove the supporting plate of both Main Frames at the vertical axis e Once the supporting plate of both Main Frames at the vertical axis is removed the brackets move from side to side Move the vertical axis at both sides to install the MLCD Do not remove the supporting plate of the supporting axis WALL UNIT Remove the screws of the supporting plate with a 5mm allen wrench Then remove the plate completely from the Main Frame 95 ORION PDP Infinitely Expandable M LC D 5 Installing t
6. ION PDP Infinitely Expandable M LC D 1 Safety Precaution N CAUTION 2 Please install as described this manual Installation of this product needs 6 or more k Please read and understand this manual fully before installation Tan skilled people Please handover this manual to customers after installation and ask to read 6 or more people need to work together to avoid personal injury and keep this manual for future use or produt damage X Please keep all the cautions and warnings for proper use of the product and prevent possible accident or hazard You can find CAUTION and WARNING signs in this manual Each sign has following meaning If the user does not comply with this instruction serious injuries or A WARNING death can be caused CAUTION If the user does not comply with this instruction minor injuries or Check the condition and type of wall before Make sure to use the drill and bit of specified product damage can be caused installation If all the condition fits use enclosed diameter Follow the instruction for the depth of WALL UNIT anchors and bolts the hole too Unauthorized anchors and bolts may not withstand the weight of Unspecified way of drilling may cause able installation It i W A R N N G the product and may cause safety problems may cause safety prebtems Installation must be done by the skilled persons Avoid weak or unstable locations designated by s
7. PORT 225 ORION PDP Infinitely Expandable M LC D 1 Safety Precaution k Please read and understand this manual fully before installation k Please hand over this manual to customers after installation and ask to read and keep this manual for future use X Please keep all the cautions and warnings for proper use of the product and prevent possible accident or hazard You can find CAUTION and WARNING signs in this manual Each sign has following meaning If the user does not comply with this instruction serious injuries or WARNING death can be caused If the user does not comply with this instruction minor injuries or PN CAUTION product damage can be caused N WARNING Installation must be done by the skilled persons designated by sales agent or dealership Installation work can be very dangerous for inexperienced person It may cause serious injury or eyen death If you need to move or replace the product please contact with skilled persons designated by sales agent or dealership If users move or install the product without proper skill and experience it may cause safety problem FH Do not install at unstable locations that cannot withstand product weight In case of weak floor or ground product may fall and cause injuries Do not hang on the product and avoid severe impact to the product Product may fall 2 use injuries N CAUTION Please install
8. Stand Hook and assemble using a wrench and 5mm allen wrench Remove the M6 70 bolts inserted at the 1st and 2nd Main Frames e Make sure that the Main Frame is securely assembled when working um m Assemble the figure using the enclosed wrench and 5mm allen wrench 0 ORION PDP Infinitely Expandable M LC D 7 Assemble the Main Frame at the 2nd row 8 Assemble the middle Main Frame at the 2nd row Hook the Main Frame at the 2nd row to the upper Stand Hook e Hook the Main Frame at the 2nd row to the upper Hook Assemble the Main Frame atthe 1st row and Main Frame at the 2nd Row with the M6 70 bolts Repeat the work indicated in Step No 7 to assemble the upper and lower Main Frames and then assemble with the adjacent Main Frame with M6 70 bolts STAND UNIT M6 70 Repeat this process to assemble the Main Frame at the 3rd row Assemble the figure using the enclosed wrench and 5mm allen wrench Assemble the figure using the enclosed wrench and 5mm allen wrench 2442 3 ORION PDP Infinitely Expandable M LC D 9 Remove the supporting plate of both Main Frames at the 1 0 Fix both rows at the vertical axis as Y Axis Link based vertical axis on the right side gt Once the supporting plate of
9. ales agent or dealership MPDP sets may fall if the location of installation cannot Installation work can be very dangerous for inexperienced withstand the weight of MPDP sets person It may cause personal injury or product damage It may cause serious injury or even death Do not use heaters or humidifiers at the place of Do not install the product near to sprinkler fire installation detector high voltage cable power source or Heat or vapor may cause fire electric shock or malfunction places of vibration or impact When you need to move or replace the Do not hang on the product or give any impact product after installation contact with the Product may fall and cause person injury skilled persons designated by sales agent or dealership Installation work can be very dangerous for inexperienced person Make sure to disconnect power cord before Use working gloves when you install installation Wear working gloves to avoid any injury If you install the product while the power cord is still connected it may cause electric shock or fire It may cause saf 22 25 gt ORION PDP Infinitely Expandable M LC D 2 Checking the location for installation Check the type of wall to examine whether it can withstand the weight of product Check the type and thickness of wall and the finish material Check the wall can withstand the weight of the product before installation You can use enclosed anchors a
10. as described in this manual Improper installation may cause serious injury or product damage MAIN FRAME Use enclosed accessories Improper accessories may not withstand the weight of the product It may cause safety problems Do not use heaters or humidifiers at the place of installation Heat or vapor may cause fire electric shock or malfunction Make sure to disconnect before installation If you install the product while the power cord is still connected it may cause electric shock or fire Installation of this product needs 3 or more people 3 or more people need to work together to avoid personal injury or product STAND UNIT Install on the even ground or floor Product installed on uneven places such as inclined places or stairways may fall and cause personal injury or product damage Do not install the product near to sprinkler fire detector high voltage cable power source or places of vibration ordmpact 2 gt IN Ss Use working gloves when you install Wear working gloves to avoid any injury ORION PDP Infinitely Expandable M LC D 2 Installing the stand 3 3 1 Connect the Foot Stand and Stand Support together 2 Hook the main Frame to the lower part of the Stand When assembling put the Foot Stand down to prevent it from falling Assemble the Main Frame from the lower to the upper part Attach the Stand Support to the upper and lower parts
11. he MLCD 1 1 Fix both rows at the vertical axis as Y Axis Link based 1 Attach the PEG and Guide Pin to the MLCD on the right side Assemble the four PEGs at the back of MLCD e Fix both rows at the vertical axis as Y Axis Link to the right side of the Main Frame bracket for the Install the Guide Pins where MLCD touches simultaneous movement of the vertical axis There is a hole for the installation of the Guide Pin at the upper part and the sides WALL UNIT e Connect the Main Frame and Y Axis Link with M6 12 bolts Fasten 4 PEGs in the back of using a 5mm allen wrench MLCD with M5 30 bolts 36 37 ORION PDP Infinitely Expandable M LC D 2 Set MLCD ID and connect all the necessary external 3 Install the MLCD from the lower part of the middle set devices and power Insert the PEGs in the PEG holes Set ID make necessary connections and power before hang the MLCD sets on the wall e Put the set down slowly The panels can be damaged by impact There is no room for such work after installation Install the MLCD from the bottom of both sides after completing the installation at the lower middle Set MLCD ID as shown in the following figure part e Make necessary connections such as VCR PC and power etc one by one e t is easy to install the set after connecting the basic cables for the Wall Unit Type Neatly arrange all the connection cables If
12. ll Bracket on the lowest part of the Main Frame choose two areas at the upper and lower parts for each set Install the Wall Brackets facing each other at the bottom portion Drill holes where the Wall Brackets will be installed using a drill and install the anchor bolts 3 8 Attach with Wall Brackets and nuts Make sure that the horizontal and vertical lines are balanced when working kl ee a D 40mm mm 40mm mm ANCHOR BOLT ANCHOR BOLT Attach the anchor bolts 3 8 and Wall Install the Wall Brackets at the bottom Brackets into the wall 26 facing the upper parts ANCHOR BOLT 3 8 Hook the Main Frame at the lower part of the Wall Bracket Assemble the Main Frame starting from the lower to the upper part Insert M6 70 bolts to the Main Frame and the Wall Bracket f the M6 70 bolt was not inserted the Main Frame would fall or be damaged a L gd WALL UNIT des eg Top H z I q RU X It is more convenient to distinguish top and bottom if you put the main frame as Bottom shown in the figure to use the holes as indicators lt 97 ORION PDP Infinitely Expandable M LC D 3 Hook the 2nd Main Frame at the middle Wall Bracket 4 Assemble the two Main Frame
13. nd bolts if the thickness of the finish material is 20mm or less Never install the product to the wall of gypsum board Check the installation space e Select the location suitable for the product size and install to maintain the horizontal and the vertical position Leave some space between the product and wall or other structures Minimum 15cm f the productis installed in a closed space it may be a cause of fire or malfunction for its internal heat 24 3 Fixing Anchor and Bolt k Make sure to use specified accessory k Check the positions and intervals If the hole positions are not accurate the gap between MLCD sets can be irregular Drill olt B Sleeve i e At a Attachment WALL BRACKET Washer i Drill a hole with 8mm of diameter and 80mm 100mm of depth at the anchor spot marked at the wall Clean the hole Insert the bolt into the hole WALL UNIT Insert the sleeve along the bolt Insert the attachment and hit it to insert by the hammer Fix the WALL BRACKET and assemble the washer and the nut Fasten the nut securely 25 ORION PDP Infinitely Expandable M LC D 4 Installing the Wall Bracket 3 X 3 1 Install the Wall Bracket Mark the location on the wall where the Bracket will be installed according to the number of set and gap To install the Wa
14. of the Foot Stand Insert the M6 70 bolt to the Main Frame and Stand Hook Q After assembling check if it would stand on its own e If the M6 70 bolt was not inserted the Main Frame would fall or be damaged STAND SUPPORT gt A d DA tf t is STAND FOOT 25 X It is more convenient to distinguish top and bottom if you put the main frame as shown in the figure to use the holes as Bottom After inserting M8 NUT apply the 8 12 bolt with the enclosed indicators 6mm allen wrench ORION PDP Infinitely Expandable M LC D 3 Hook the 2nd main Frame at the lower hook of the center 4 Assemble the two Main Frames frame Assemble the two Main Frames at the upper and lower parts with the M6 70 bolt using the nsert the M6 70 bolt to the Main Frame and Stand Hook enclosed wrench and 5mm allen wrench e f the M6 70 bolt was not inserted the Main Frame would fall or be damaged m a FE o Assemble the figure using the enclosed wrench and 5mm allen wrench ORION PDP Infinitely Expandable M LC D 5 Hook the 3rd Main Frame at the bottom row to the Stand 6 Remove the M6 70 bolt Hook Hook the Main Frame to the
15. ou need to detach a MLCD set in the lower line move the set in the upper line to position C Remove guide pins from the set in the lower line move it to position A Fasten 4 PEGs in the back of and detach from the main frame MLCD with M5 30 bolts 16 r2 ORION PDP Infinitely Expandable M LC D 4 Adjust the MLCD gap with the Adjuster 3 Fix the set by pushing towards the supporting plates The gap of the MLCD can be fixed using the Adjuster e Install the FIX BRACKET unit of both sets at the vertical axis by pushing towards the supporting To fix the gap detected between the MLCD or when the MLCD is tilted after the plates atthe central area installation use the Adjuster pan e BRACKET unit is manufactured basically for OLM 4610 0LM 4650 Install the Adjuster at the lowest part of the Main Frame using the bmm allen wrench The other models need to detach EXTENSION BRACKET from FIX BRACKET unit to install lt o ADJUSTER M10 50 8mm allen wrench X Detach EXTENSION BRACKET from FIX BRACKET unit for all models beside OLM 4610 OLM 4650 FIX BRACKET Fasten the fixing bolt at It is possible to lift or lower the Main the proper position of each Frame using 8mm allen wrench after the MLCD model E m UT pd Adjuster was installed at the lower 4 4 bolts next to MLCD handle U
16. s Insert M6 70 bolts at the Main Frame and Wall Bracket Assemble the two Main Frames at the upper and lower parts with M6 70 bolts using a e f the M6 70 bolt was not inserted the Main Frame would fall or be damaged allen wrench E z L J M6 70 M6 70 es 55 Assemble the figure using the enclosed wrench and 5mm allen wrench 28 29 ORION PDP Infinitely Expandable M LC D 5 Hook the 3rd Main Frame at the 3rd row from the bottom to the Wall Bracket Hook the Main Frame to the Wall Bracket and assemble it with a wrench and 5mm allen wrench Make sure that the Main Frame is securely assembled when working Assemble the figure using the enclosed wrench and 5mm allen wrench 30 6 Remove the M6 70 bolts e Remove the M6 70 bolts inserted at the 1st and 2nd Main Frames M6 70 4d WALL UNIT Assemble the figure using the enclosed wrench and 5mm allen wrench 31 ORION PDP Infinitely Expandable M LC D 7 Assemble the Frame at the 2nd row 8 Assemble the middle Main Frame at the 2nd row Hook the Main Frame at the 1st row to the upper Hook of the Stand Hook the Main Frame of the 2nd row to the Wall Bracket Assemble the Main Frame atthe 1st row and Main Frame at the 2nd row with M6 70 bolts Repeat Step No 7
17. se part of the Main Frame 2 5 allen wrench FIXING BOLT 18 19 ORION PDP Infinitely Expandable M LC D 5 Setting MLCD ID configuration and Connection 3X3 Configure MLCD ID and make connections for all the necessary external devices and power Configure MLCD ID as shown in the following figure Make necessary connections such as VCR PC and power etc and finish configuration Neatly arrange all the connection cables If they are stretched out or disorganized it may cause personal injury or bad connection k For more information for ID configuration and connection please refer to MLCD user manual IN OUT DVI Signal Distributor UXGA UP TO 165MHz RS 232C control PC 20 WALL UNIT This manual describes the installation for 3X3 sets Apply following instruction according to the number of MLCD sets as you need WALL BRACKET MAIN FRAME WALL UNIT 545 7 1710 6 545 7 40 0 429 7 21 OR
18. they are stretched out or disorganized it may cause personal injury or bad connection Process the connection lt of various lines when k For more information for ID setting and connection please refer to MLCD user manual z installing MLCD C QU zm s mx m 2 D1 2 w2 BB ID 3 1 7 E BU L F F i NS y CONN 7 HN ID 4 our ID 5 IN OUT i IN OUT m a 85 fa C E E iia ED 05 IDG 00 5 107 gt 10 8 IDO EC J H p CJ E mf E ES Dont 3 pet 011 mlz Jo mg DVI Signal Distributor UXGA UP TO 165MHz o i POSITION A POSITION C If you need to detach a MLCD set in the lower line move the set in the upper line to position C Remove guide of pins from the set in the lower line move it to position A and detach from the main frame POSITION 39 RS 232C control PC ORION PDP Infinitely Expandable M LC D 6 Adjust the MLCD gap with the Adjuster 4 Fix the set by pushing towards the supporting plates at the The gap of the MLCD can be fixed using the Adjuster center of the
19. vertical axis after completing the installation To fix the gap detected between the MLCD or when the MLCD is tilted after the of MLCD installation use the Adjuster Install the Fix Bracket of both sets at the vertical axis by pushing towards the supporting plates at Install the Adjuster atthe lowest part of the Main Frame using the 5mm allen wrench the central area e Install the FIX BRACKET UNIT of both sets at the vertical axis by pushing towards the supporting plates at the central area e FIX BRACKET UNIT is manufactured basically for OLM 4610 0LM 4650 The other models need to detach EXTENSION BRACKET from FIX BRACKET UNIT to install WALL UNIT ADJUSTER M10 50 8mm allen wrench X Detach EXTENSION BRACKET from FIX BRACKET unit for all models beside OLM 4610 OLM 4650 FORMAGA EI It is possible to lift or lower the Main gt Fasten the fixing bolt at Frame using a 8mm allen wrench after the the proper position of each Adi A lled he MLCD model juster was installed at the lower part of the Main Frame Attach the FIX BRACKET UNIT to the main frame and fix with fixing bolts next to MLCD handle Use 2 5mm allen wrench FIXING BOLT 40 41 ORION PDP Infinitely Expandable M LC D SPECIFICATION External dimension 1026 5mm W x 585 7mm H x 65mm D Tan
Download Pdf Manuals
Related Search