2N Indoor Touch - 2N WIKI
Contents
1. Display set the device display parameters Home screen modify and set the introductory screen buttons Software set the application installation uninstallation Advanced restart and LOG System Info Display the following information on the device gt Device serial number configuration and current state Local local date and time Memory current RAM state Internal storage current internal storage state Licence current licence state Add licence licence adding option Cache current cache state SD card storage external SD card if inserted memory state LAN WiFi current Ethernet and WiFi adapter configuration Caution Remember that the original licence key will always be overwritten with the new one Therefore add only a valid licence key supplied by your distributor Networks LAN set the fixed Ethernet interface Enable Ethernet activate deactivate the adapter DHCP enable disable the DHCP client IP address IPv4 address if the DHCP client is off IP mask IPv4 mask if the DHCP client is off IP gateway gateway IPv4 address if the DHCP client is off IP DNS DNS server IPv4 address if the DHCP client is off Wi Fi according to the device type Enable Wi Fi activate deactivate the adapter DHCP enable disable the DHCP client IP address IPv4 address if the DHCP client is off IP mask IPv4 mask if the DHCP client is off I2. TELEKOMUNIKACE a s is the holder of the ISO 9001 2009 certificate All development production and distribution processes of the company are managed by this standard and guarantee a high quality technical level and professional aspect of all our products Content 1 Product Overview eee 4 1 Product DESCHPU N seira eia oiii a ER week dee de A oe odo 5 1 2 Differences between Models ee ees 6 1 5 lermisandSYMBOIS dossier det e ee beo ae oe metende 7 LA Oalely PIecautloriS 393 4 d bod tw ee ev bs a owe BRE W wid 8 2 Description and Installation 9 ZBE VOW SAW artes andes dace Ra Ra eed to e RO ea Pata oS SUR 10 2 2 Brief Installation Guide llle 12 2 ohnstalladon CondiHons wever san X aor ROC NOCERE YE owe eae ea ROC 13 24 SAS LED ve turtur uio dtp toll e d aei Da Ded den rd dodi di be a ED edam Daran 15 sagit MT T nmTT 16 3 2N Indoor Touch Configuration 17 gel Iactory RESOU aeg vane v qiue qoae E dudes ee dun be P WA Deere 18 B troddctory Scree dusetad acoso 969 w obti O eae p altas nti 19 3 3 Launcher Configuration aaa aaa aaa aaa aa aaa aa ii 20 54 Device UDOTAJO w uus L dn GREW eo eek dica a EU 23 4 2N Helios IP Mobile Configuration 24 4 1 Application Description lt 0 0 0c ee aaa 25 4 2 Introductory Screen aanname ted hete d ese as 26 4 3 Notificati
3. the floor The product package includes screws and plugs for mounting into classic bricks Use appropriate installation fittings for a different type of wall material 2 Feed the device via an Ethernet PoE adapter or PoE supporting Ethernet switch router or a 12V DC 2A power adapter a With PoE supply just snap RJ 45 into the appropriate connector b With 12V DC 2A supply screw the power adapter plus and minus cables into the appropriate terminal board on the device c Simultaneous PoE 12V DC 2A supply is not recommended 3 Put the device on the holder as follows a Place the device carefully from top to bottom with its bottom part slightly away up to 5 cm from the wall b When the device fits to the main holder supports push the device bottom part onto the wall 4 Tighten the safety screws on both the device sides 2 3 Installation Conditions Make sure that the following 2N Indoor Touch installation conditions are met There must be enough space for 2N Indoor Touch installation 2N Indoor Touch is designed for vertical wall mounting perpendicular to the floor in the height of up to 120 cm above the floor If necessary operate 2N Indoor Touch in a position other than as aforementioned for a short time only for quick testing purposes in a servicing centre for example Exceeding the allowed operating temperature may not affect the device immediately but leads to premature ageing and lower reliability Refer
4. the stand by mode to reduce the device temperature if critical to avoid forced turn off reset in extreme cases The user is notified of this problem by a short display of the notification window Display the current device temperature in the Setting section Trouble The device does not start and remains in one of the LED states or gets restarted round and round u Advice Press and hold the Reset button on the device backside during the startup to restore the factory values automatically If the trouble persists upgrade the system via an SD card If the trouble still persists contact the Servicing centre Trouble The device fails to emit sounds even the incoming call ringing u Advice Check the volume setting and adjust the loudspeaker volume level if necessary with the Volume up down buttons on the lower status bar For the most frequently asked questions refer to fag 2n cz 6 2 Directives Laws and Regulation General Instructions and Cautions Please read this User Manual carefully before using the product Follow all instructions and recommendations included herein Any use of the product that is in contradiction with the instructions provided herein may result in malfunction damage or destruction of the product The manufacturer shall not be liable and responsible for any damage incurred as a result of a use of the product other than that included herein namely undue application and disobedience of the recommendatio
5. to 3 3 Launcher Configuration for details Firmware Upgrade We recommend you to upgrade the 2N Indoor Touch firmware during installation Refer to www 2n cz for the latest FW version Refer to 3 4 Device Upgrade for the firmware upgrade procedure 2 4 Status LED Status LED indicates the device states when the LCD display is switched off or the device is in the service mode See the table below for the LED colours and states Device Startup Coeur State _ X Operating system start Blue is flashing Factory reset Purple is flashing System upgrade process Standard Operation Colour State 4 No light Device state is displayed Stand by mode display off Other Notification of other states of applications running in the system 2N states Helios IP Mobile e g 2 9 First Startup When you start the device for the first time the initial initialisation longer start is performed and indicated by the following LED notification sequence Blue gt Red gt Green gt Boot animation on the screen gt Introductory system screen The introductory screen provides essential information for User Manual saving reading You can deactivate this screen for later startups The table below shows the factory values of relevant device parameters Time weather location Prague CZ Basic unlimited licence SW licence or according to the Part No Caution u Change
6. 2N Indoor Touch User guide Firmware 3 Version 2 www 2n cz The 2N TELEKOMUNIKACE a s is a Czech manufacturer and supplier of telecommunications equipment A 48 3 o 9 3 y gt uw v x The product family developed by 2N TELEKOMUNIKACE a s includes GSM gateways private branch exchanges PBX and door and lift communicators 2N TELEKOMUNIKACE a s has been ranked among the Czech top companies for years and represented a symbol of stability and prosperity on the telecommunications market for almost two decades At present we export our products into over 120 countries worldwide and have exclusive distributors on all continents TELE CD k PEK CET PUM 2N is a registered trademark of 2N TELEKOMUNIKACE a s Any product and or other names mentioned herein are registered trademarks and or trademarks or brands protected by law 2N TELEKOMUNIKACE a s administers the FAQ database to help you quickly find information and to answer your questions about 2N products and services On www faq 2n cz you can find information regarding products adjustment and instructions for optimum use and procedures What to do if CE 2N TELEKOMUNIKACE a s hereby declares that the 2N Indoor Touch product complies with all basic requirements and other relevant provisions of the 1999 5 EC directive For the full wording of the Declaration of Conformity see the CD ROM if enclosed or our website at www 2n cz The 2N
7. Future Functions New Features The text in this document designates the functions and features that are under preparation or development at present 1 4 Safety Precautions The manufacturer reserves the right to modify the product in order to improve its qualities The manufacturer continuously responds to the clients requirements by improving the software Refer to the www 2n cz company websites for the latest 2N9 Indoor Touch firmware and User Manual t is prohibited to use any transmitters including 2N Indoor Touch with an internal WiFi adapter in areas where explosives are used such as quarries WiFi adapters may affect sensitive life saving devices in medical centres Therefore it is prohibited to use 2N Indoor Touch with an internal WiFi adapter in such facilities n general any RF energy radiation prohibition regarding WiFi antenna equipped devices applies to 2N Indoor Touch with an internal WiFi adapter Where necessary a 2N Indoor Touch unit can be installed at a safe distance from the prohibited area and an Ethernet cable can only be carried to the required site u Although 2N Indoor Touch is not intended for cars or aeroplanes all prohibitions and regulations relating to adapter equipped devices apply to 2N9 Indoor Touch too 2 Description and Installation This section describes the 2N Indoor Touch installation and correct connection Here is what you can find in this section 2 1 Before You Sta
8. P gateway gateway IPv4 address if the DHCP client is off IP DNS DNS server IPv4 address if the DHCP client is off Click Apply settings to save the current adapter settings Click Select network to select the WiFi AP network to which the device shall be connected Local Settings 2 Tip Open keyboard settings set the system keypad Open language settings set the system language Launcher language set the introductory and setting screen language Open data and time settings set the system date time Weather set the installation site for weather forecast u The weather forecast location includes the local place town and country Audio abbreviated If you enter an incorrect format no weather forecast will be displayed Make sure while setting the location that the device is connected to the Internet Refer to http openweathermap org for more details Set the device volume level Display u Brightness set the display brightness level u Turn display off after set the timeout for automatic turn off in case of inactivity u Notification LED u White LED when display is turned off the white LED lights up automatically after the LCD display turn off to indicate the stand by mode u Enable notifications enable LED notifications of selected events missed calls e g in the stand by mode Home Screen This section helps you change the position and content of the introductor
9. ck and save the ZIP download into the SD card root directory refer to 2 1 Before You Start Reset the device as follows a Press the backside Reset button shortly refer to 2 1 Before You Start or b Click the Reboot button in the configuration section of the introductory screen refer to 3 3 Launcher Configuration Having detected correct firmware files 2N Indoor Touch invites you to confirm upgrade via a touch screen The upgrade process is also indicated by an RGB LED on the device front refer to 2 4 Status LED Having completed upgrade remove the SD card and click on the display to restart the system Caution The first startup after successful upgrade may take a few minutes The factory values can be reset automatically in some upgrade types 4 2N Helios IP Mobile Configuration This section describes configuration of the pre installed 2N Helios IP Mobile applicat ion Here is what you can find in this section 4 1 Application Description 4 2 Introductory Screen 4 3 Notification in 2N Indoor Touch Environment 4 4 Application Configuration 4 5 Connection to 2N Helios IP 4 1 Application Description 2N Helios IP Mobile is an application designed for making video calls between devices based on the Android OS or iOS and intercoms of the 2N Helios IP family Get the application via the Google Play store Android OS or Apple store iOS This application is pre installed in 2N Ind
10. e for damage or destruction of the product or damage incurred by the consumer in case the product is used and handled contrary to the said regulations and provisions The consumer shall at its own expense obtain software protection of the product The manufacturer shall not be held liable and responsible for any damage incurred as a result of the use of deficient or substandard security software The consumer shall without delay change the access password for the product after installation The manufacturer shall not be held liable or responsible for any damage incurred by the consumer in connection with the use of the original password The manufacturer also assumes no responsibility for additional costs incurred by the consumer as a result of making calls using a line with an increased tariff Electric Waste and Used Battery Pack Handling Do not place used electric devices and battery packs into municipal waste containers An undue disposal thereof might impair the environment Deliver your expired electric appliances and battery packs removed from them to dedicated dumpsites or containers or give them back to the dealer or manufacturer for environmental friendly disposal The dealer or manufacturer shall take the product back free of charge and without requiring another purchase Make sure that the devices to be disposed of are complete Do not throw battery packs into fire Battery packs may not be taken into parts or short circu
11. es SIP H 263 4 Primarily the application is intended for the 2N Helios IP intercom family 2N Indoor Touch contains a specific user interface for an increased user comfort and safety 2N Indoor Touch basic features 7 LCD colour display with capacitive touch layer Wall mounting option LAN interface with PoE supply option 802 11bgn WiFi interface depending on the Part No Contactless card reader depending on the Part No Status RGB LED at front Binary inputs and outputs for control of other devices Android operating system with pre installed basic applications and own user interface Pre installed 2NP Helios IP Mobile application 1 2 Differences between Models This manual is valid for all the 2N Indoor Touch types Therefore please note that several features described in this document are only available in selected models or need to be activated with a licence key If a feature is not available in all the models a note is added to the respective subsection 1 3 Terms and Symbols The following symbols and pictograms are used in the manual D Safety u Always abide by this information to prevent persons from injury D Warning Always abide by this information to prevent damage to the device J Caution Important information for system functionality 2 Tip Useful information for quick and efficient functionality i Note m Routines or advice for efficient use of the device
12. ited either TELECOMMUNICATIONS 2N TELEKOMUNIKACE a s Modranska 621 143 01 Prague 4 Czech Republic Phone 420 261 301 500 Fax 420 261 301 599 E mail sales 2n cz Web www 2n cz PR2098v1 2 2N TELEKOMUNIKACE a s www 2n cz 36
13. ns and warnings in contradiction herewith Any use or connection of the product other than those included herein shall be considered undue and the manufacturer shall not be liable for any consequences arisen as a result of such misconduct Moreover the manufacturer shall not be liable for any damage or destruction of the product incurred as a result of misplacement incompetent installation and or undue operation and use of the product in contradiction herewith The manufacturer assumes no responsibility for any malfunction damage or destruction of the product caused by incompetent replacement of parts or due to the use of reproduction parts or components The manufacturer shall not be liable and responsible for any loss or damage incurred as a result of a natural disaster or any other unfavourable natural condition The manufacturer shall not be held liable for any damage of the product arising during the shipping thereof The manufacturer shall not make any warrant with regard to data loss or damage The manufacturer shall not be liable and responsible for any direct or indirect damage incurred as a result of a use of the product in contradiction herewith or a failure of the product due to a use in contradiction herewith All applicable legal regulations concerning the product installation and use as well as provisions of technical standards on electric installations have to be obeyed The manufacturer shall not be liable and responsibl
14. on in 2N Indoor Touch Environment 2 4 4 Application Configuration es s 28 4 5 Connection to 2NOG Helios IP llle 29 o Technical Parameters 30 6 Supplementary Information 32 0 1 TrOUDIESNOOUNG quse mati dioe eee a oz Ada dw bd beden ded 33 6 2 Directives Laws and Regulation General Instructions and Cautions 34 1 Product Overview In this section we introduce the 2N Indoor Touch product outline its application options and highlight the advantages following from its use The section also includes Safety precautions Here is what you can find in this section u 1 1 Product Description 1 2 Differences between Models 1 3 Terms and Symbols 1 4 Safety Precautions 1 1 Product Description Based on the Android OS 2NP Indoor Touch helps load third party applications to a device if enabled so in the device configuration thus improving its flexibility It contains a 7 colour LCD display with a capacitive touch layer loudspeaker microphone and Ethernet and WiFi interfaces depending on the Part No for LAN connection Optionally 2N Indoor Touch is equipped with a wireless card reader de pending on the Part No Analogue inputs and outputs also part of the equipment 2N Indoor Touch has a factory pre installed application 2N Helios IP Mobile which helps establish video calls with any other video call supporting devic
15. oor Touch and launched automatically upon every startup depending on the Part No 2N Helios IP Mobile helps you make calls between the 2N Indoor Touch units and with the SIP Proxy other SIP supporting devices 4 2 Introductory Screen The 2N Helios IP Mobile application displays the following introductory screen Expedice Prodejna Helias Team w pe 4 Heli 4 predni _ vchoM HeliosiP Marketing HeliosiP Obchod CR HelioslP Sales WO HeliosiP Technicka podpora Vratnik TT 2p List of available intercoms List of missed calls Current video image saving Video transmission Call control Door Lock control Listening in enable disable Access to configuration section oe ee i i Tip u Click on the Home button in the system to minimise the application The application will be restored automatically by an incoming call 4 3 Notification in 2N Indoor Touch Environment The 2N Helios IP Mobile application uses LED notification The 2NP Indoor Touch LED starts flashing red in case u There is an unread incoming call in the application or u 2N Indoor Touch is in the stand by mode 4 4 Application Configuration The 2N Helios IP Mobile application is configured separately and requires just one setting u Application name set the application name in the 2N Helios IP Mobile configuration section Set the same name in the 2N Helios IP configuration 4 5 Connection to 2N Heli
16. os IP Change some settings in the 2N Helios IP intercom to be connected to make the 2N Helios IP Mobile 2N Helios IP connection effective Refer to the 2N Helios IP User Manual at http wiki 2n cz display HIP for details 5 Technical Parameters Power Supply u Type external power adapter SELV type 90 230 V 50 60 Hz to 12V DC 2 A Power over Ethernet PoE 802 3af u Power input up to 10W User Interface Control capacitive touch panel Display size 7 Resolution 1024x600 px Backlight LED Status indicator 1 RGB LED Audio Microphone integrated Loudspeaker 2W integrated OS Android 4 2 Interface LAN 10 100BaseT RJ 45 Cabe or higher recommended Memory card SD card up to 16 GB WiFi 802 11b g n integrated antenna Card reader integrated Mechanical Parameters Dimensions w x h x d 235x165x40 mm Weight 850g Operating temperature 0 C 60 C Relative humidity 10 90 non condensing Storing temperature 20 C 70 C en 6 Supplementary Information This section provides supplementary information on the 2N Indoor Touch product Here is what you can find in this section u 6 1 Troubleshooting u 6 2 Directives Laws and Regulation General Instructions and Cautions 6 1 Troubleshooting Trouble The device always switches off the display before timeout u Advice Check the device temperature If improperly installed 2N Indoor Touch automatically turns into
17. os IP Mobile 12 03 Wednesday 09 07 2014 518 C Settings few clouds Factory settings Gallery launch the photo image processing application File manager launch a standard file system application 2N Helios IP mobile video call application refer to for details Browser launch an Internet browser application Time Date tiles Weather tile About button Settings access to configuration section The lower graphic bar includes five graphic controls Back icon helps you return one level higher or one step back depending on the application type Home icon helps you return to the introductory screen Squares icon helps you switch the currently launched applications Loudspeaker icons help you increase decrease the system loudspeaker volume 3 3 Launcher Configuration Settings Click the Settings button on the introductory page to access the configuration section Complete the correct access password A Caution u The factory access password is 2n If you lose the access data you will have to factory reset the device Change the password in the Settings Home screen menu The configuration section consists of the following screens and subsections System info display information on the device state Networks configure the device network adapters Local settings set the installation site and input device language Audio set the device audio parameters
18. rt 2 2 Brief Installation Guide 2 3 Installation Conditions 2 4 Status LED 2 5 First Startup The device is designed solely for wall mounting Install the device with the aid of a holder which is included in the product and Installation Manual delivery Prepare the proper wall fittings screws and wall plugs suitable for the given wall type and structure Respect the local standards for installation of electronic devices onto flammable materials while mounting Use a cross point screwdriver for tightening the fitting screws on the device sides to place 2N Indoor Touch properly 2 1 Before You Start Product Completeness Check Please check the 2N Indoor Touch delivery before starting installation Indoor Touch Quick Start manual Wall holder screwed to device Installation fittings 2 screws 2 plugs for flush mounting Front Layout T S 8 12 2014 19 C Glass frame LCD display with capacitive touch layer Status RGB LED Loudspeaker Microphone micro SD card slot Contactless card reader depending on the Part No 70 Backside Connectors 1 RJ 45 LAN 10 100BaseT connector 2 12V 2A DC supply terminal board only if PoE is not used 3 Reset Factory reset button 4 Binary input output terminal board for application control 5 micro SD card slot 2 2 Brief Installation Guide 1 Install the device holder onto a vertical wall The recommended installation height is 120 cm above
19. the access password while configuring the device for the first time to avoid unauthorised access to configuration System Licence 2N Indoor Touch has a factory licence key which can be time limited depending on the Part No The licence expiry may cause a partial limitation of the device functionality Refer to 3 3 Launcher Configuration for the current licence state and licence adding procedure if necessary 3 2N Indoor Touch Configuration This section describes the 2N Indoor Touch configuration Here is what you can find in this section u 3 1 Factory Reset u 3 2 Introductory Screen u 3 3 Launcher Configuration u 3 4 Device Upgrade 3 1 Factory Reset Follow the steps below to reset the 2N Indoor Touch factory values 1 Push the Factory reset button in the Launcher Configuration menu Refer to 3 3 Launcher Configuration 2 Press and hold the Reset button on the device backside a Remove the device from the installation holder b Press the Reset button and hold until the notification RGB LED lights up yellow c Release the Reset button and follow the instructions displayed Caution Factory reset results in a complete deletion of all user data 3 2 Introductory Screen The introductory screen provides a total of nine configurable tiles for you to launch specific user defined applications The About and Settings buttons are also available here STR FA cy EJ Gallery File manager 2N Heli
20. to 5 Technical Parameters for the acceptable range of operating temperatures and relative humidity values 2N Indoor Touch is not designed for environments with increased vibrations such as means of transport machine rooms and so on 2N Indoor Touch is not intended for dusty environments and places with unstable humidity and abrupt temperature changes 2N Indoor Touch may not be exposed to aggressive gas acid vapours solvents etc 2N Indoor Touch is not intended for direct connection into the Ethernet Internet 2N Indoor Touch must be connected to the Ethernet Internet via a separating active network element switch router 2N Indoor Touch is designed for indoor use It may not be exposed to rain flowing water condensing moisture fog etc 2N Indoor Touch cannot be operated on places exposed to direct sunshine and near heat sources Keep some free space above and below 2N Indoor Touch to allow air to flow and conduct heat away No strong electromagnetic radiance is allowed on the installation site The VoIP connection must be configured properly according to the SIP and other VoIP recommendations It is recommended that the power adapter be connected to the mains via a UPS and reliable overvoltage protection Wall Mounting 2N Indoor Touch is designed for wall mounting Follow the steps below ARE Unscrew the holder fitting screws on the device sides Turn the metal holder slightly aside in the
21. upper part of the device Move the holder downwards Fit the loose holder to the wall on the installation site Put the device on the holder and tighten the safety screws Follow the installation instructions printed on the device package Power Supply Connection You can feed 2N Indoor Touch as follows 1 Use any 12V 2A DC power adapter connected to the terminal board see the figure 2 Use an Ethernet cable connected to a PoE supply or PoE supporting Ethernet switch router A successful operation is indicated by a status RGB LED or LCD display PoE Supply Connection Use a standard straight RJ 45 terminated cable to connect 2N Indoor Touch to the Ethernet The device supports the 10BaseT and 100BaseT protocols The Ethernet connection state is indicated by the LEDs placed on the RJ 45 connector Refer to 3 3 Launcher Configuration for the factory settings of the 2N Indoor Touch Ethernet interface Caution m Factory reset results in a change of the Ethernet interface configuration A defective Ethernet cable may lead to a high packet loss in the Ethernet and subsequent instability and poor video call quality Warning Connection of a defective or improper power adapter may lead to a temporary or permanent failure of the 2NP Indoor Touch unit 1 Tx 2Tx 3 Unused 4 Rx 5 Unused 6 Rx 7 Unused 8 Unused Licence Limitations 2N Indoor Touch can contain time limited software licences Refer
22. y screen tiles and the configuration access password click Set password for access to settings Software u Allow installation of apps from unknown sources enable disable installation of other applications from an SD card or the Internet u Uninstall application uninstall the user installed applications Caution By allowing other application installations you may cause system instability due to an application error Click Factory reset to delete such applications if necessary Advanced Force sleep if device temperature is above enable the stand by mode whenever the device temperature exceeds the defined internal temperature limit Reboot restart the device Factory reset reset the device factory values Caution u We do not recommend you to change the preset device temperature limit to avoid device life impairment or system instability In case the device keeps exceeding the temperature limit please check the installation conditions 3 4 Device Upgrade 2NP Indoor Touch can be upgraded via an SD card only The firmware packet always includes the latest OS version a Launcher and 2N Helios IP Mobile application See below for how to upgrade 1 2 3 Insert the SD card in the SD card slot on the left side of 2N Indoor Touch Download the latest 2N9 Indoor Touch firmware version from www 2n cz Get a microSD card of the maximum capacity of 16 GB and with the FAT32 file system Unpa
Download Pdf Manuals
Related Search