Instruction manual
Contents
1. 230V 50Hz 2000W 8 7A 3 1 2 300 x 180 x 400 4 2 DL891 A 230V 50Hz 2x 2000W 2x 8 7A 2x3 2x 1 2 300 x 269 x 400 8 0 Telephone Helpline 1300225960 Electrical Wiring The plug is to be connected to a suitable mains socket This appliance is wired as follows e Live wire coloured brown to terminal marked L e Neutral wire coloured blue to terminal marked N e Earth wire coloured green yellow to terminal marked E This appliance must be earthed using a dedicated earthing circuit If in doubt consult a gualified electrician Electrical isolation points must be kept clear of any obstructions In the event of any emergency disconnection being reguired they must be readily accessible Compliance The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste To help prevent possible harm to human health and or the environment the product must be disposed of in an approved and environmentally safe recycling process For further information on how to dispose of INN this product correctly contact the product supplier or the local authority responsible for waste disposal in your area Apuro parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international independent and federal authorities Apuro products have been approved to carry the following symbol All rights reserved No part of these2. tabs on the rear of the element panel unit 2 Ensure the safety switch is aligned with the slots on the appliance A 3 Lower the unit onto the appliance ensuring the tabs are located inside the lugs on the rear of the appliance B Cooking 1 Connect the appliance to the mains power supply 2 Set the thermostat to the desired temperature The amber power indicator light turns On A Note 170 C to 180 C is suitable for general cooking 3 The appliance begins to heat the oil Note The red Heat indicator light turns On during heat up When the oil is at the set temperatures the light turns Off 4 Once the oil is at the set temperature lower the food into the oil using the basket supplied WARNING Ensure the basket is securely located on the basket mounts These are located towards the front of the oil pan 5 Remove the basket from the oil once the food is cooked Shake gently above the oil pan to remove any excess oil WARNING The food and oil are very hot Take care when removing the basket as oil may drip Thermal Cut Out Reset Apuro Fryers are fitted with a Thermal Cut Out safety feature Should the Reset temperature exceed safe levels the appliance will automatically cut Switch power To reset the appliance aftera sufficient cool down period 1 Unscrew the cover of the Safety Cut Out reset switch 2 Press the small reset switch down until it clicks using a blunt pointed instrument 3 The applia
3. Fryer Instruction manual Model DL891 A DL892 A L370 A P107 A Safety Tips Position on a flat stable surface A service agent qualified technician should carry out installation and any repairs if required Do not remove any components on this product Consult Local and National Standards to comply with the following e Health and Safety at Work Legislation BS EN Codes of Practice e Fire Precautions e IEE Wiring Regulations e Building Regulations ALWAYS ensure oil levels are within the MIN and MAX levels Failure to do so could result in fire ALWAYS use a suitable cooking oil ALWAYS remove excess moisture water from food before frying to avoid excess foaming and spitting of the oil Change oil regularly The flashpoint of oil the point at which it ignites gradually reduces the more it is used DO NOT cover the oil pan when frying DO NOT immerse the appliance in water Some surfaces become hot during operation take care when using the appliance Always switch off and disconnect the power supply to the appliance when not in use Not suitable for outdoor use This appliance must only be used in accordance with these instructions and by persons competent to do so This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning u
4. iance is plugged in correctly and switched on Plug and lead are damaged Call Apuro agent or qualified technician Fuse in the plug has blown Replace the plug fuse Power supply Check power supply Internal wiring fault Cal Apuro agent or qualified technician Thermal cut out activated Reset thermal cut out Safety switch not located properly Refit control element unit Appliance does not reach set temperature Faulty thermostat Cal Apuro agent or qualified technician Faulty element Cal Apuro agent or qualified technician Build up of fat on the element cl ean the appliance does not come on Appliance heats up but indicator light Indicator light has expired Cal Apuro agent or qualified technician Power indicator light comes on but appliance does not heat up Faulty element Cal Apuro agent or qualified technician Faulty thermostat Cal Apuro agent or qualified technician Thermostat set incorrectly Check thermostat Appliance slow to heat up Faulty element Call Apuro agent or qualified technician Build up of fat on the element Clean the appliance Technical Specifications Model Voltage Power Current a single nd E Sania en DL892 A 230V 50Hz 2200W 9 6A 5 2 300 x 270 x 400 5 8 DL891 A 230V 50Hz 2x 2200W 2 x 9 6A 2x5 2x2 300 x 540 x 400 10 8 L370 A
5. instructions may be produced or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Apuro Every effort is made to ensure all details are correct at the time of going to press however Apuro reserve the right to change specifications without notice DECLARATION OF CONFORMITY Equipment Type Model Legislation Standards Producer Name Producer Address Fryer DL891 A DL892 A L370 A P107 A C Tick AS NZ 3820 Essential Safety Requirements for Low Voltage Electrical Equipment EN 55014 1 2006 EN 55014 2 1997 A1 EN 61000 3 2 2006 EN 61000 3 3 1995 A1 A2 EN 60335 2 37 2002 A1 EN 60335 1 2002 A11 A1 A12 A2 A13 with AS NZS 60335 1 2002 A1 A2 A3 EN 62233 2008 Apuro 15 Badgally Road Campbelltown NSW 2560 I the undersigned hereby declare that the equipment specified above conforms to the above Legislation and Standard s Date Signature Full Name Position 22 03 11 Richard Cromwell Marketing Director DL891_DL982_A5_v4
6. nce is now reset and can be used as normal Cleaning Care amp Maintenance e Always turn Off the appliance and disconnect from the power supply before cleaning e Always allow the oil to cool before cleaning ideally for at least 6 hours e Check the temperature with a suitable probe thermometer 40 C is the MAXIMUM temperature at which oil should be removed e For best performance Apuro recommend that the appliance is cleaned after each day of operation A Note Failure to clean the appliance regularly may result in premature activation of the thermal cut out switch e Remove the Element Control Panel for ease of cleaning e Empty the oil to clean the appliance thoroughly A WARNING DO NOT remove the oil pan until AFTER it has been emptied e Ifthe oil is to be reused then filtering it before refilling the pan will extend the oils cooking life e Use a Suitable detergent to clean the interior of the appliance e Use warm soapy water and a damp cloth to clean the exterior of the appliance e Dry thoroughly after cleaning ensure there is no water left in the fryer e A Apuro dealer or qualified technician should carry out repairs if required Telephone Helpline 1300225960 Troubleshooting If your Apuro appliance develops a fault please check the following table before making a call to the Helpline Fault Probable Cause Action The appliance is not working The appliance is not switched on Check the appl
7. se of the appliance by a person responsible for their safety Keep all packaging away from children Dispose of the packaging in accordance to the regulations of local authorities If the power cord is damaged it must be replaced by a Apuro agent or a recommended qualified technician in order to avoid a hazard Product Description DL892 A Single 5 litre fryer DL891 A Double 5 litre fryer L370 A Single 3 litre fryer P107 A Double 3 litre fryer Introduction Please take a few moments to carefully read through this manual Correct maintenance and operation of this machine will provide the best possible performance from your Apuro product Pack Contents The following is included Apuro Fryer e Lid s Basket s e Instruction manual Element guard s DL892 A DL891 A Only Telephone Helpline 1300225960 Apuro prides itself on quality and service ensuring that at the time of packaging the contents are supplied fully functional and free of damage Should you find any damage as a result of transit please contact your Apuro dealer immediately Operation Thermal Cut out reset cover Thermal Cut out reset switch Power indicator light Thermostat Element Safety switch Connecting the Element Control Panel The Element and Control Panel are supplied as a single detachable part to aid in cleaning the appliance To connect to the body of the appliance 1 Locate the lugs on the rear of the appliance with the
Download Pdf Manuals
Related Search