TR-256 triton blue
Contents
1. are the result of unprofessional operation Please use the original packaging if the device is to be transported Please consider that unauthorized modifications on the device are forbidden due to safety reasons Never remove the serial barcode from the device as this would make the guarantee void If this device will be operated in any way different to the one described in this manual the product may suffer damages and the guarantee becomes void Furthermore any other operation may lead to dangers like short circuit burns electric shock etc DESCRIPTION Features For playing back your light shows 1 DMX Recorder for 256 channels 2 9 macros with up to 9 chasers 3 32 chasers with up to 56 scenes 4 Sound control via built in mic 5 Ideal for rentals SETUP Installation Install the device on a plane Connect the connection cable of the power unit with the DC IN socket Plug the power unit into your outlet Sound control The sound control works via the built in microphone DMX 512 connection connection between recorder and projector DMX controller Recorder pono o DMX IN DMX OUT Only use a stereo shielded cable and 3 pin XLR plugs and connectors in order to connect the controller with the recorder or one fixture with another DMX output DMX input XLR mounting sockat XLR mounting sockat 1 Ground 1 Ground 2 Signal 2 Signal 3 Signal 3 Signal If you are using controllers2. with this occupation you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX chain If you wish to connect DMX controllers with other XLR outputs you need to use adapter cables Building a serial DMX chain Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture Always connect one output with the input of the next fixture until all fixtures are connected Caution At the last fixture the DMX cable has to be terminated with a terminator Solder a 120 Ohm resister between Signal and Signal into a 3 pin XLR plug and plug it in the DMX output of the last fixture OPERATION After you connected the device to the mains the TR 256 is ready for use With the Power button you can switch the device on and off Press the Cancel button twice in order to return to the original setting When the controller TR 256 is power on the state of EMS memory is locked in order to avoid false operation You are supposed to press CANCEL and DOWN together for a while until the display shows UL then the controller is released from the locking state and you can use the controller normally When press CANCEL and DOWN together again for a while until the display shows L the controller will enter the locking state and at this time the controller can not record or play programme Record a chaser Run the desired chaser on your co
3. Arey Y PROFESSIONAL LIGHT CONTROLLER USER S MANUAL TR 256 KEEP THIS MANUAL FOR FUTURE NEEDS CE For your own safety please read this user manual carefully before installing the device CAUTION Keep this device away from rain and moisture CAUTION Unplug mains lead before opening the housing Every person involved with the installation operation and maintenance of this device has to be qualified consider this manual to be part of the total product keep this manual for the entire service life of the product pass this manual on to every further owner or user of the product download the latest version of the user manual from the Internet INTRODUCTION Thank you for having chosen a TR 256 If you follow the instructions given in this manual we are sure that you will enjoy this device for a long period of time Unpack your TR 256 SAFETY INSTRUCTIONS This device has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual 1 i gt Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems Always plug in the power unit least Keep away from heaters and other heating sources If the device has been exp
4. ene Create a macro A Macro is a chain of several chasers Disconnect the controller from the Recorder Press the Up button in order to change to the Manual mode Press the Macro button Select the desired macro via the Up Down buttons Press the Enter button Select the desired chaser via the Up Down buttons Press the Record button The chaser will be added to the macro After adding the last chaser do not press the Enter button Rather press the Enter button to memorize Call up a macro Disconnect the controller from the Recorder Press the Up button in order to change to the Run Chaser mode Press the Macro button Select the desired macro via the Up Down buttons Press the Enter button The macro is played back The program speed the waiting time and the sound control can be adjusted like described above Delete a macro Press the Up button in order to change to Manual mode Press the Macro button Select the desired macro via the Up Down buttons Press the Delete button The macro will be deleted PROBLEM CHART PROBLEM CAUSE REMEDY No power The power unit is not connected Check the connection cable of the power unit and any extension cables CLEANING AND MAINTENANCE DANGER TO LIFE Disconnect from mains before starting maintenance operation We recommend a freguent cleaning of the device Please use a soft lint free and moistened cloth Never use alcohol or solvents There are no serviceable parts inside t
5. he device Maintenance and service operations are only to be carried out by authorized dealers Should you need any spare parts please use genuine parts Should you have further questions please contact your dealer TECHNICAL SPECIFICATIONS Power supply 9VDC 1A Power consumption 9 W Sound control Via built in microphone Dimensions 192 x 172 x 32 mm Weight 1 kg Please note Any information is subject to change without prior notice 10
6. ntroller Please note the chaser in the controller must run without fade time Set the Fade Time control of your controllers to 0 Press the Up button in order to change to the Auto Record mode Press the Enter button Select the desired chaser via the Up Down buttons Press the Enter button Select the number of scenes via the Up Down buttons Press the Enter button The scenes are recorded Record scenes individually If your controller does not feature a Fade Time control you need to record the scenes step by step Call up the desired scene in your controller Press the Up button in order to change to the Manual mode Press the Enter button Select the desired chaser via the Up Down buttons If the chaser is empty a dot appears behind the chaser number Press the Enter button Select the desired scene via the Up Down buttons Press the Record button The scene is now recorded Select the next scene in your recorder and controller Press the Record button Press the Enter button in order to leave this mode Call up a chaser Disconnect the controller from the Recorder Press the Up button in order to change to the Run Chaser mode Press the Enter button Select the desired chaser via the Up Down buttons Press the Enter button The chaser is played back During the playback you can change the chaser via the Up Down buttons Adjusting the program speed The projectors run through the selected program step by step with the prog
7. osed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature This device falls under protection class III The device always has to be operated with an appropriate transformer Always disconnect from the mains when the device is not in use or before cleaning it Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons are not subject to warranty Keep away children and amateurs from the device There are no serviceable parts inside the device Maintenance and service operations are only to be carried out by authorized dealers OPERATING DETERMINATIONS This device is a DMX recorder for controlling DMX effects or spots in discotheques on stages etc This product is allowed to be operated with a direct voltage of DC 9V 1A and was designed for indoor use only Do not shake the device Avoid brute force when installing or operating the device When choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust There should not be any cables lying around You endanger your own and the safety of others Operate the device only after having familiarized with its functions Do not permit operation by persons not qualified for operating the device Most damages
8. rammed speed The program speed can be adjusted via the time Fader The Control Display shows the current speed between 0 2 and 25 seconds Adjusting the waiting time The projectors run through the selected program step by step with the programmed waiting time The waiting time can be adjusted via the Cross Fader The Control Display shows the current waiting time between 0 and 100 Activating the sound control If the sound control is activated the program moves in the bass tact of the music Press the Music button LED shines and the sound control is activated Delete a chaser Press the Up button in order to change to the Manual mode Press the Enter button Select the desired chaser via the Up Down buttons Press the Delete button and Insert button at the same time The chaser will be deleted Insert delete a scene Press the Up button in order to change to the Manual mode Press the Enter button Select the desired chaser via the Up Down buttons Press the Enter button Select the desired scene via the Up Down buttons Press the Insert button in order to inset the scene before the current scene or press Delete in order to delete the current scene Call up a scene Press the Up button in order to change to the Manual mode Press the Enter button Select the desired chaser via the Up Down buttons Press the Enter button Select the desired scene via the Up Down buttons Press and hold the Preview button in order to call up the sc
Download Pdf Manuals
Related Search