MH-500 – 500g/0.1g User Manual
Contents
1. MH 500 500g 0 1g User Manual Thank you for purchasing our pocket scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service Never load the scale with more than the maximal capacity Over loading can permanently damage it Avoiding any exposure to extreme heat or cold your scale works better when operate at normal room temperature Always allow the scale to acclimate to normal room temperature for at least 1 hour before use Give your scale sufficient warm up time usually 30 seconds to give the internal components a chance to stabilize before calibration Keep your scale in a clean environment Dust dirt moisture vibration air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of you scale Handle with care Gently apply all items to be weighed onto tray top Although this scale is designed to be quite durable try to avoid rough treatment as this may permanently damage the internal sensor Avoid shaking dropping or otherwise shocking the scale This is a precision instrument and must be handled with extreme care Only operate the scale on a stable vibration free surface Console Size 5cm 5cm Cover amp Tray PCS On Off UNITS Conversion LED Backlight Switch Use 2 AAA Battenes I2. OPERATION 1 Place scale on horizontal flat surface press ON OFF key to turn on the scale Wait until 0 0 is displayed Put the object s on the weighing platform The Console Using the UNITS key you can switch between the weighing units 5 Using the LIGHT key you can turn on of off the backlight U N Il TARE WEIGHING Turn on scale as described above Place the tare item platform the console Press TARE key and wait until 0 0 is displayed Add the net weight item oe HI COUNTING FUNCTION s Turn on the scale and wait until the LCDdisplays 0 0 2 Place a sample amount 25pcs 50pcs 5pcs or 100pcs of the quantity you wish to weigh and count onto the platform 3 Press and HOLD PCS KEY FOR 2 Seconds the LCD will display a random number for example 100 4 Press UNITS key to select the sample amount of the item that you have put onto the platform 5 Press PCS key to confirm the above information the LCD will now display PCS in the corner to show that the scale is in counting mode 6 Remove the sample quantity from the platform 7 You now can place any amount of your item s on the scale and the LCD will display a count 8 You can switch between weighing mode and counting mode by pressing UNITS or PCS key respectively IV Calibration 1 Reset the scale by pressing ON OFF key 2 Wait until the LCD displays 0 00 and then p
3. ress and HOLD the MODE key for 3 seconds the LCD will display CAL then release the MODE key 3 Press the MODE key again the LCD will display CAL followed by the required calibration weight 4 Add the required calibration weight the display will show PASS and return to normal weighing mode 5 Put away the calibration weight and press ON OFF to turn of the scale and the calibration is finished V SPECIFICATIONS e Model MH 500 e Capacity 500g e Resolution 0 1g e Units Grams g Ounces oz Tael tl Carats ct Grains gn e Calibration auto calibration Tare range tare full capacity Auto off default 30 second oft Operation temperature 50 86 degrees Fahrenheit e Scale Dimensions 120x62x20mm LxWxH Platform Dimensions 56x50mm Power 2 x AAA Battery e Product weight 110g VI PACKAGE CONTENTS 1 500g 0 1g Electronic Digital scale 1 User manual
Download Pdf Manuals
Related Search